XML Reports

Dear Hussein,
We are on 12.0.6 and 12.1.1 and our xlm reports are not getting completed, please advice if we have to apply any patch for this with patch no#
REgds
Bilal
Edited by: user5499416 on May 22, 2009 4:11 AM

I mean to say, if I have to bounce the Concurrent managers adcmctl.sh, first I have to restart the database then only concurrent managers are comming up except OPP.
ICM logfile:
Found dead process: spid=(2879), cpid=(19975), ORA pid=(29), manager=(696/1025)
Found dead process: spid=(2880), cpid=(19976), ORA pid=(30), manager=(696/1024)
Found dead process: spid=(2881), cpid=(19977), ORA pid=(45), manager=(401/10)
Found dead process: spid=(2882), cpid=(19978), ORA pid=(31), manager=(0/1063)
Found dead process: spid=(2890), cpid=(19982), ORA pid=(41), manager=(275/40)
"DEV_0523.mgr" 2163 lines, 59159 characters
Starting INVTMRPM Concurrent Manager : 23-MAY-2009 12:30:37
Starting RCVOLTM Concurrent Manager : 23-MAY-2009 12:30:37
Starting WFWSSVC Concurrent Manager : 23-MAY-2009 12:30:37
Starting WFMLRSVC Concurrent Manager : 23-MAY-2009 12:30:37
Starting WFALSNRSVC Concurrent Manager : 23-MAY-2009 12:30:37
Starting FNDCRM Concurrent Manager : 23-MAY-2009 12:30:37
Starting FNDSCH Concurrent Manager : 23-MAY-2009 12:30:37
Starting IEU_WL_CS Concurrent Manager : 23-MAY-2009 12:30:37
Starting IEU_SH_CS Concurrent Manager : 23-MAY-2009 12:30:37
Starting INVMGR Concurrent Manager : 23-MAY-2009 12:30:37
Starting OAMCOLMGR Concurrent Manager : 23-MAY-2009 12:30:37
Starting STANDARD Concurrent Manager : 23-MAY-2009 12:30:37
Starting STANDARD Concurrent Manager : 23-MAY-2009 12:30:37
Starting STANDARD Concurrent Manager : 23-MAY-2009 12:30:37
Starting PASMGR Concurrent Manager : 23-MAY-2009 12:30:37
Process monitor session ended : 23-MAY-2009 12:30:37
Process monitor session started : 23-MAY-2009 12:32:37
Process monitor session ended : 23-MAY-2009 12:32:37
Process monitor session started : 23-MAY-2009 12:34:38
Process monitor session ended : 23-MAY-2009 12:34:38
Process monitor session started : 23-MAY-2009 12:36:38

Similar Messages

Print Images in XML Report

Hi,
I do have a requirement to print digital signature in a Quote, the signature is been stored as a picture (longraw datatype per_images table) in HRMS Tables
HRMS Responsibility -> people -> Enter and Maintain -> Picture, here we will upload the signature of a person and this need be printed in XML Report.
In the Report Builder if we change the ‘file format’ to ‘Image’ we are able to display the image , but when we are register in APPS, we not able to get the image, even XML tags are not been generated.
Regards,
Satish.

Here...this should help !
BLOB image in XML Publisher

How to open a form from Oracle XML Report .xls Output?

Hi All,
We have a requirement wherein we have one complex SQL query, requirement is to fetch the data from that query and show it to the user. So far, so good. We can either create a report thru' UTL file to show the output to the user or can create a XML report whose output can be in the excel format.
Now user wants to have a hyperlink i.e. when he clicks the BSA (Blanket Sales Agreement) from the report output, it should be able to route him to BSA screen (oracle form), so that he can directly correct the issue with that corresponding BSA on which he clicked.
i.e. requirement is to create a a hyperlink from report output which will route the user to that oracle form with the BSA queried.
Not sure how can we implement this. If anybody has come across this type of requirement, please share your ideas and the approach used so as to accomplish this. Any inputs on this will be highly appreciated.
Cheers!
-Sumir

Hello Sumir,
we create reports in an XML format using http://matzberger.de/oracle/spreadsheet-en.html.
Within these files you can create hyperlinks to a forms application like
http://<applicationserver>/forms/frmservlet?config=xy&p_autoinit_module=ab&p_autoinit_arg=123
With these parameters we call a default forms module (welcome screen) and then start module ab and execute a query for 123. The user then can directly access the data he needs.
Regards
Marcus

How to create new Custom XML Report without using Form Builder

Hi,
What are the steps to create new Custom XML Report without using Report Builder ?
Thanks and Regards,
Abhi

Hi,
Steps we now follow
1)Create Data Model in Reports Builder
2)Create xml
3)Insert xml in Publisher to build Fomat
4)FTp rdf
5)Create Data Definition and Template
6)Create executable and Concurrent Program
Is there any way we can build reports without use of Report Builder ? By writing PL SQL Package for Before Report and After Report etc ...
Thanks and Regards,
Abhijit Rode

XML Reports completes in warning

Hi gurus,
I am having trouble our developer have made XML report and registered it when he is running the concurrent request is completing in warning (yellow color) and no output is generate and below is the log file for the concurrent request.
we never had any XML report in our environment this is the first time so do we need to do any setup for XML reports to generate fine ?
also where is OPP service log files location ?
Thanks
Regards,
HASSAN
General Ledger: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
GLTS module: GL_TRIAL BALANCE ACCOUNT WISE SUMMARY
Current system time is 22-OCT-2011 12:20:40
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_set_of_books_id='1001'
P_CHART_OF_ACCOUNTS_ID='30008'
p_company='001'
COMP2='001'
p_project='1101'
p_project_to='1101'
p_period='200612'
p_period_to='201112'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
Report Builder: Release 10.1.2.3.0 - Production on Sat Oct 22 12:20:42 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 785118 on node TEST at 22-OCT-2011 12:20:57.
Post-processing of request 785118 failed at 22-OCT-2011 12:20:58 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT -------------
Not printing the output of this request because post-processing failed.
Finished executing request completion options.
Concurrent request completed
Current system time is 22-OCT-2011 12:20:58
---------------------------------------------------------------------------

hassanksa wrote:
the desktop version of xml pub which our developer used for report development was not compatible with our apps
then i recommended developer with the correct version once he used the right one the reports worked fineThanks for the update and for sharing the solution!
Hussein

Problem calling XML Report Publisher from Oracle Reports

Hi,
I'm facing a problem in calling XML Report Publisher from Oracle Reports.
Basically, I'm trying to customise Dunning Letter program. The program which is submitted calls another program. I have customised the second program and added a call to a stored procedure which in turn calls XML Report Publisher.I have created a template and attached it to the second program as well.
The procedure code is as follows.
v_request_id := FND_REQUEST.SUBMIT_REQUEST(application => 'AR'
,program => 'ARDLP_NON_SRS'
,description => 'Dunning Letter Print from Dunning Letter Generate'
,sub_request => FALSE
l_status := fnd_concurrent.WAIT_FOR_REQUEST
( REQUEST_ID => v_request_id,
INTERVAL => 15,
MAX_WAIT => 180,
PHASE => l_phase,
STATUS => l_status_code,
DEV_PHASE => l_dev_phase,
DEV_STATUS => l_dev_status,
MESSAGE => l_message );
v_xml_req_id := FND_REQUEST.submit_request(application => 'XDO',
program => 'XDOREPPB',
          argument1 => v_request_id,
argument2 => 'FLS DE AR Dunning Letter Print - German',
argument3 => 603, -- changed 665 -- was 551,
argument4     => NULL,
argument5 => 'N',
argument6     => 'RTF',
          argument7     => 'PDF');
Now, there are two problems I'm facing...
1. when the second program('Dunning Letter Print from Dunning Letter Generate') gets called it executes this procedure ... logically the 'Dunning Letter Print from Dunning Letter Generate' should get called twice ... second time from the procedure. Its getting called multiple times .. as many as 15 - 20 times.
2. The Xml Report Publisher program ultimately gets called but its erroring out with the following error:
java.sql.SQLException: No corresponding LOB data found :SELECT L.FILE_DATA FILE_DATA, DBMS_LOB.GETLENGTH(L.FILE_DATA) FILE_LENGTH, L.LANGUAGE LANGUAGE, L.TERRITORY TERRITORY, B.DEFAULT_LANGUAGE DEFAULT_LANGUAGE, B.DEFAULT_TERRITORY DEFAULT_TERRITORY,B.TEMPLATE_TYPE_CODE TEMPLATE_TYPE_CODE, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.START_DATE START_DATE, B.END_DATE END_DATE, B.TEMPLATE_STATUS TEMPLATE_STATUS, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.DS_APP_SHORT_NAME DS_APP_SHORT_NAME, B.DATA_SOURCE_CODE DATA_SOURCE_CODE, L.LOB_TYPE LOB_TYPE FROM XDO_LOBS L, XDO_TEMPLATES_B B WHERE (L.LOB_TYPE = 'TEMPLATE' OR L.LOB_TYPE = 'MLS_TEMPLATE') AND L.APPLICATION_SHORT_NAME= :1 AND L.LOB_CODE = :2 AND L.APPLICATION_SHORT_NAME = B.APPLICATION_SHORT_NAME AND L.LOB_CODE = B.TEMPLATE_CODE AND ( (L.LANGUAGE = :3 AND L.TERRITORY = :4 ) OR (L.LANGUAGE = :5 AND L.TERRITORY = :6) OR (L.LANGUAGE= B.DEFAULT_LANGUAGE AND L.TERRITORY= B.DEFAULT_TERRITORY ) )
I have checked from database that the XDO_LOBS/ XDO_TEMPLATES_B table has corresponding registration data.
I don't know what's creating the problem.
If anyone has customised the Dunning Letter program before or having any idea about this problem, please help me out ..
Thanks

satrajit,
Now I am getting the same error you got, Can you please tell me the solution you found?.
XML Report Publisher 5.0
Updating request description
Waiting for XML request
Retrieving XML request information
Preparing parameters
Process template
--XDOException
java.sql.SQLException: No corresponding LOB data found :SELECT L.FILE_DATA FILE_DATA, DBMS_LOB.GETLENGTH(L.FILE_DATA) FILE_LENGTH, L.LANGUAGE LANGUAGE, L.TERRITORY TERRITORY, B.DEFAULT_LANGUAGE DEFAULT_LANGUAGE, B.DEFAULT_TERRITORY DEFAULT_TERRITORY,B.TEMPLATE_TYPE_CODE TEMPLATE_TYPE_CODE, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.START_DATE START_DATE, B.END_DATE END_DATE, B.TEMPLATE_STATUS TEMPLATE_STATUS, B.USE_ALIAS_TABLE USE_ALIAS_TABLE FROM XDO_LOBS L, XDO_TEMPLATES_B B WHERE L.LOB_TYPE = :1 AND L.APPLICATION_SHORT_NAME= :2 AND L.LOB_CODE = :3 AND L.APPLICATION_SHORT_NAME = B.APPLICATION_SHORT_NAME AND L.LOB_CODE = B.TEMPLATE_CODE AND ( (L.LANGUAGE = :4 AND L.TERRITORY = :5 ) OR (L.LANGUAGE = :6 AND L.TERRITORY = :7) OR (L.LANGUAGE= B.DEFAULT_LANGUAGE AND L.TERRITORY= B.DEFAULT_TERRITORY ) )
     at oracle.apps.xdo.oa.schema.server.TemplateInputStream.initStream(TemplateInputStream.java:309)
     at oracle.apps.xdo.oa.schema.server.TemplateInputStream.<init>(TemplateInputStream.java:187)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.getTemplateFile(TemplateHelper.java:776)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:1269)
     at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:807)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:148)

Problem with the hierarchial fields in a Purchase order xml report

Hi,
I am having a problem with the hierarchy problem. We are populating attribute 15 of a PO header. some times it can be null. FYI, we are using 11.5.10 instance where oracle supports direct PO template rather than having a rdf file.
And now in the xml report, if attribute15 of po header is not null then it is fine.
But if attribute15 is null, then the template is picking from the next available attribute15 that is from the po lines. As the line level group of "LINES" is between the "PO_DATA" (header group), hence the template is checking for next available attribute15.
Can any one please suggest how to design the template where we can make the template to check only for that tag at the header level group rather than the line level group tag?
Thank You in advance.
Regards,
Srinivas.

Hi
Incase you want to transfer attachements from SRM to R/3, then you try implementing the BADI in SRM side. The BADI which will help in this case is
<b>BBP_CREATE_PO_BACK</b> BADI.
<b>Please read the standard SAP documentation of this BADI using SE18 Transaction, before making any code changes.</b>
<u>Few Important SAP OSS notes to refer in this case -></u>
Note 989184 - Transferred shopping cart with internal attachments
Note 550071 - FAQ: EBP - Shopping Cart
Note 916347 - Transfer shopping cart with internal attachments
Note 1001130 - FAQ - Attachment questions (Buyside)
<u>Few useful links -></u>
<b>http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
Re: Attachments to backend
Re: Document Attachments in Shopping Cart
Re: Attachment in SRM
Re: SRM Documents and Attachments
Re: Limit in Attachments of an item in Shopping Cart
Re: return delivery text from material document is not passed to SUS
</b>
Do let me know, incase you face any problems.
Regards
- Atul

Creating XML report using PL/SQL Stored Procedure

Hi Friends,
I am working on an xml report with the xml source as PL/SQL Stored Procedure.
I am referring the exercise shown in the following link to understand the process:
   http://orclapp.blogspot.com/2012/02/developing-xml-publisher-report-using.html
In the example shown in the above link I could not understand the following:
1) In the following procedure, the out parameter 'retcode' is not used at all.
   What is the importance of this parameter.
    PROCEDURE REPORT (errbuf OUT VARCHAR2, retcode OUT VARCHAR2, p_product_id   IN     NUMBER)
2) After the xml data is prepared and put to 'l_result' Clob variable, the following
    Loop is executed. I am not able to appreciate why the following loop is required.
     LOOP
         EXIT WHEN l_length = l_retrieved;
         IF (l_length - l_retrieved) < 32000
         THEN
            SELECT SUBSTR (l_result, l_retrieved + 1) INTO l_xmlstr FROM DUAL;
            l_retrieved := l_length;
            fnd_file.put_line (fnd_file.output, l_xmlstr);
         ELSE
            SELECT SUBSTR (l_result, l_retrieved + 1, l_offset)
              INTO l_xmlstr
              FROM DUAL;
            l_retrieved := l_retrieved + l_offset;
            fnd_file.put_line (fnd_file.output, l_xmlstr);
         END IF;
     END LOOP;
3) In the example it is not explained how the concurrent program gets the xml data?
   I assume it is written to a file using the following line of code:
    fnd_file.put_line (fnd_file.output, l_xmlstr);
   I would appreciate if anyone can throw some light into my above queries so that I can understand the process clearly.
Thanks & Regards
Hawker

Hi 32000 in the code is a 'safe' size smaller than the max available 32767, the loops purpose is to move through the entire thing in chunks that will be manageable in the limits of the data type.
Btw; if you are in Oracle e-business suite then you can also use Oracle reports very simply to create XML output.
If you have reports developer all you need to do is put raw sql (without any 'artifice' to create XML) in the report SQL and then set the reports output to XML in the program definition in Oracle e-business.
best regards,
Robert.

Overide XML Report Publisher renaming?

Anyone know if it is possible to prevent the XML Report Publisher report from renaming the concurrent request on completion. This makes it very difficult for users to understand what requests are, especially when they are automatically submitted from other concurrent programs.
For example in EBS 11.5.10+ I have a dunning letter custom where the standard "Dunning Letter Print from Dunning Letter Generate" process submits the bursting program and 2 instances of XML Report Publisher, one for the printed dunning letters and one for the summary report. We could live with the bursting report name but both the XML Report Publisher instances complete with the same name! How is the user supposed to know what is what?
Cheers,
Dave

Glad someone else thinks so!
I can see the reason behind what it does and it's fine for manually submitted "XML Report Publisher" requests but when you get to submitting it from another concurrent program the renaming is a pain, especially if you are submitting multiple reports from the same request (e.g. detail and summary reports). Users just don't know what they are supposed to be looking at!
Hopefully Tim will pick it up but I suspect it will have to be a future fix rather than something we can change right now. Roll on a new release for EBS!
Cheers,
Dave

Unable to load the XML Report

Hi,
I am using TestStand 3.1. Someone before me has developped a lot of things in our application : specific steps, specific process model, ... . Now this person is not here anymore and I have a test report display problem.
After an execution, the execution window cannot display the test report and displays the following message :
"Unable to load the XML Report.
At line 285 End tag 'NOBR' does not match the start tag 'BR'."
Also with Internet Explorer, the test report cannot be displayed (and he locates the error at lign 287) .
Needless to say that I am a poor guy in XML code that's why I am asking you some help.
But, I opened the .xml with a text editor and that is the part of the code which causes the problem :
284 </Prop>
285 <BLOCKQUOTE>
286 <H5><NOBR>Begin Sequence: MainSequence
287 <BR>(X:\DATA_Utilisateur\Florian DENEVE\04_GENERIC\GenericTestMainSeq\GenericTestMainSeq.seq)<BR></BR></H5>
288 <table BORDERCOLOR=#000000 FRAME=BOX RULES=ALL WIDTH=70%><TBODY>
(please, be careful with the lines numbers, because i don't think that IE and TestStand have the same numbering)
I don't know if it's a problem of basic TestStand or if it's due to the new process model and modifications realized by my previous colleague.
Any ideas ?
Thanks in advance for your help.

Ok, here they are.
There is a file called Addons.cfg.sources but I had to rename it to get it to attach
Attachments:
Addons.cfg.sources.txt ‏1 KB
Addons.cfg ‏53 KB
ResultProcessing.cfg ‏189 KB

XML Report Publisher program is erroring out

Hi All,
I've customized the AR Customer Statements.
I've created a data definition as "ARXSGP" and uploded the sample_output.xml of Statement Generation Program to it. Also I've created a Data template as "ARXSGPO" and attached the data definition "ARXSGP" to it and uploaded the customized rtf file "XXHCC_CLE_F_ARCUSBALSL.rtf" and set the default output type to PDF.
As I donot wish to call the XML Report Publisher program manually every time when I Print the Statements through Print Documents-->Statements.
So I've done the below customization in ARXSGP.rdf file ie; Print Statements Report which is an Oracle Report.
I've added the below code in After Report trigger.
=======================================
FUNCTION AfterReport
RETURN BOOLEAN
IS
BEGIN
Below code added for Customer Statement Case Study
DECLARE
l_req_id NUMBER := 0;
L_XML_LAYOUT BOOLEAN := TRUE;
BEGIN
L_XML_LAYOUT := FND_REQUEST.ADD_LAYOUT (TEMPLATE_APPL_NAME => 'AR', TEMPLATE_CODE => 'ARXSGP', TEMPLATE_LANGUAGE => 'en', TEMPLATE_TERRITORY => 'US', OUTPUT_FORMAT => 'PDF');
IF L_XML_LAYOUT THEN
srw.message(20001, 'Template is picked ');
srw.message(20002,'Concurrent request Id : '||:p_conc_request_id);
l_req_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
'XDOREPPB',
NULL,
NULL,
FALSE,
:p_conc_request_id,
222, -- Receivables
'ARXSGPO', -- Statement Generate
'en-US', -- English
'N',
'RTF',
'PDF');
IF l_req_id > 0 THEN
COMMIT;
ELSE
srw.message(20004, 'Failed to submit request');
END IF;
ELSE -- Not L_XML_LAYOUT
srw.message(20005, 'Template is not picked ');
END IF;
END;
--------------------Code Ends----------------------------
SRW.USER_EXIT('FND SRWEXIT');
RETURN (TRUE);
END;
==============================================
After Printing the Statements through Print Documents-->Statements
Statement Generation Program is being called and later XML Report Publisher program is also being invoked.
But the XML Report Publisher Program is erroring out with below error.
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOREPPB module: XML Report Publisher
Current system time is 03-SEP-2012 17:42:18
Oracle XML Publisher 5.6.3
java.lang.NumberFormatException: For input string: "ARXSGPO"
     at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
     at java.lang.Integer.parseInt(Integer.java:447)
     at java.lang.Integer.parseInt(Integer.java:497)
     at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:215)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
------------- 1) PUBLISH -------------
Disabling requested Output Post Processing. Nothing to process. The output of the request is zero byte.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-SEP-2012 17:42:22
Please help out with a solution.
Thanks,
Tech D

for r12 add one row for parameter "Dummy for Data Security" from desc of XDOREPPB
follow works for me
SQL> set serveroutput on
SQL>
SQL> declare
2    v_request_id   number;
3 begin
4
5   begin fnd_global.apps_initialize(0, 20419, 0); end;
6   v_request_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
7                                              'XDOREPPB',
8                                              NULL,
9                                              NULL,
10                                              FALSE,
11                                              'N', -- Dummy for Data Security
12                                              9888637, -- Request
13                                              0, -- Template Application
14                                              'XXAND10_1', -- Template
15                                              'en-US', -- Template Locale
16                                              'N', -- Debug Flag
17                                              'RTF', -- Template Type
18                                              'RTF' -- Output Format
19                                              );
20
21    dbms_output.put_line(v_request_id);
22    if v_request_id > 0 then
23      dbms_output.put_line('successfully submitted.');
24      commit;
25    else
26      dbms_output.put_line('not submitted.');
27      rollback;
28    end if;
29
30 end;
31 /
9888651
successfully submitted.
PL/SQL procedure successfully completed
SQL> 'Y' for "Dummy for Data Security" also works for me
SQL> declare
2    v_request_id   number;
3 begin
4
5   begin fnd_global.apps_initialize(0, 20419, 0); end;
6   v_request_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
7                                              'XDOREPPB',
8                                              NULL,
9                                              NULL,
10                                              FALSE,
11                                              'Y', -- Dummy for Data Security
12                                              9888637, -- Request
13                                              0, -- Template Application
14                                              'XXAND10_1', -- Template
15                                              'en-US', -- Template Locale
16                                              'N', -- Debug Flag
17                                              'RTF', -- Template Type
18                                              'RTF' -- Output Format
19                                              );
20
21    dbms_output.put_line(v_request_id);
22    if v_request_id > 0 then
23      dbms_output.put_line('successfully submitted.');
24      commit;
25    else
26      dbms_output.put_line('not submitted.');
27      rollback;
28    end if;
29
30 end;
31 /
9888652
successfully submitted.
PL/SQL procedure successfully completed
SQL>

XML Report Excel Output exponential value issue

Hello All,
While working on XML Report we need to show output in excel format. One of the out put value is “00110E001”. but when displaying in excel is shows "1.00E+0" and default behavior of MS Excel is if the any number data contains “E” then excel will convert those records in exponential format. But our client required those data which are present in database i.e. “00110E001”.
Kindly share your valuable inputs.
Thanks in advance
Thanks,
Pushpal

Hi Uday,
You are making number as a string, by adding a character :) , so it will be displayed as string with space and not as number.

Arabic numbers issue in XML Report

Dear Experts,
I have one arabic xml report, when i ran the report it showing english numbers, instead of arabic numbers.But in the output i should get arabic numbers.
Please find the attachment of xml template and output.
could any one help me on this, its urgent.
Thanks in advance.
Best Regards
Amar

Dear Experts,
I have one arabic xml report, when i ran the report it showing english numbers, instead of arabic numbers.But in the output i should get arabic numbers.
Please find the attachment of xml template and output.
could any one help me on this, its urgent.
Thanks in advance.
Best Regards
Amar

Changing Step Name in XML Report programmaticaly

I am trying to change the step name programmaticaly in TestStand to reflect in the XML report. The step is executed several times in a loop, and every time the loop runs I want the step to be named differently in the XML report. For example, the names will be something like this < Test1: Signal Name 1>, <Test2: Signal Name 2> ....etc. Any help on this will be appreciated .
Thanks,
Sam

Hi,
The best time to change the name is before you perform the test, then it will get inserted in the ResultList and hence into your report.
I have attached one way of doing this. You can also perform it after the Step you wish to change, in which case you would use the RunState.PreviousStep as a reference.
You could call the API method as part of your code.
Remeber, if you use a PropertyLoader to load Limits, and you have placed this inside the loop, then your Limits file for the Step Name must match the new step name not the old one that you see statically.
This is a TS3.5 example.
Hope this helps
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
Sequence File1.seq ‏25 KB

Page number problem in xml report

hi all,
I have created one xml report for purchase order
I want to print the page number and po number for each page ,
to achieve this i have inserted at header section the page number as "1"
but it is displaying for only 1 and 3rd and 5th pages and so on
kindly help me on this
thanks for all in advance.

>
i have inserted at header section the page number as "1"
>
why?
>
but it is displaying for only 1 and 3rd and 5th pages and so on
>
of course
use
>
Page numbering
Insert page numbers into your final report by using the page numbering methods of your word processing application. For example, if you are using Microsoft Word:
1. From the Insert menu, select Page Numbers...
2. Select the Position, Alignment, and Format as desired.

Printing parameter values in xml report, and displaying it in header of the

Hi All,
Can anybody give me an idea to print the parameter values in the xml report.
My requirement is like, I have 10 parameters in report builder, I have generated the xml file and created the .rtf template and finally registerted in oracle apps. But now, the requirement is to print the parameter values in the report output.I don't see any xml tags in the xml output.
Any suggestion will be appreciated.
Thanks in advance.

I think all the XML attributes can contain lexicals. If you bring up the property palette against the report object you can just set the following:
XML Tag Attributes: myParameter="&<P_1>"
where P_1 is your user parameter.

XML Reports

Similar Messages

Maybe you are looking for