XML Unnesting and In Memory issue

I have a source table in oracle that contains a column (Nclob) that have XML messages and my target is BW data souce
I build my job like that
Source Table------Quey1 (to convert to varchar)-------------Query2(Unnest XML using extract_xml)-----------------BW Target
I successfully running the job with small test data in source (About 100,000 records) takes about 30 minutes
But when I running with the actual table contains about 140000000 it takes so long time my be more than 12 hours and never ending and it is affect the job server so I decide to kill the job
I checked the log I found that the job running in im memory mode instead of peagable because it is nested schema
I need help to enhance this job and let running successfully

Do you mean that I need to remove Query transform that do extract_xml from the column and instead of it use XML_Pipeline?
I tried but I found XML_pipeline only accept files not database

Similar Messages

  • N86 hard format and restoring / Memory issue

    Hello Nokia hello all,
    I have an issue in my N86; after a simple restart I got memory crroupted in E:/ and external memory. and the phone doesnot working properly. I did hard reset according to the available instructions but it does not change anything.
    currently I caanot store anything in the E:/ drive because I lost it after a few days, and also the external memory is crroupted and does not open. 
    please your urgent help. 
     best regards,
    Solved!
    Go to Solution.

    Have you checked whether Nokia Suite upon PC gives you the option to re-install existing device software?
    When you say "hard reset" was this *#7370# followed by 12345 (default Nokia lock code unless altered by user) or three key depressed power on reset until Nokia "Shaking hands" logo appeared?
    As your N86 supports UDP = User Data Preservation you haven't restored possibly corrupt settings?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • CF10 Update 14 and possible memory issues

    One of my associates is complaining that since I applied the Coldfusion 10 Update 14 we are experiencing memory issues.  Has anyone else had issues with Update 14?
    Just a System Admin fighting the good fight!

    I’ll throw in that even if changing the JVM helped, it would still leave the question open as to whether/why Chad experienced a change in heap usage on solely updating CF.
    Chad, really? Nothing else changed? I just find that so odd. I’ve not yet heard about it (or seen it) being an issue. Of course, update 14 did do quite a bit: beyond bug fixes it also updated Tomcat. I would be surprised that that could lead to memory leaks (assuming that’s what this is, if really NOTHING else changed).
    What about the database you’re using?  Update 14 did change the JDBC drivers for Postgres. Are you using that DBMS?
    Just trying to think what else could contribute to this, if indeed nothing else changed for you.
    It is possible that something else changed, either in the config or coding (and you didn’t know it), or perhaps in the load against the server (I see that all the time: someone adds a new site, perhaps brought over from another server, and they assume “it doesn’t get much traffic”, but they don’t realize how heavily spiders and bots may hit that newly added  site, which could definitely put pressure on the heap whether from increased sessions, caching, and so on.)
    Of course, you can always uninstall the update easily, in the same CF Admin page where you install it. That would help you prove if that alone was it. (Just be sure to rebuild the connectors back to the version as per the CF update you would revert to. I don’t think it’s appropriate to run the update 14 connector with an earlier update.)
    Finally, FWIW, if you really wanted to go nuts, you could change CF to using Java 8. That’s another thing added in 14: support of 8. But to clear, it does not “change it” for you, so that’s not what happened here. But just as the two Carl’s proposed changing the  JVM to see if it “would help”, you could consider moving to Java 8. That’s all the more worth considering if indeed the issue is that something changed in your environment (config/code/load) and you simply do need more heap (in Java 7).
    Of course CF will use the same GC you have specified even if you update it to use 8, so you may need to make some changes to see a real impact. But for instance one thing Java 8 does by default is no longer use the permanent generation. That should have no effect on your your observed use of heap. Just saying that 8 is indeed different, and you never know if updating to it could help (or hurt. It’s so new that CF supports it in 10, and only to come in update 3 of 11, that there’s relatively little known experience about the combination.)
    Anyway, do let us know if you find more.
    /charlie

  • A88XM-E35 and PC1866 memory issues

    Hi, I’m having a problem with my MSI A88XM-E35 motherboard.
    The system doesn’t boot at all when I install PC3-14900 (1866) memory.
    The memory kit in question:
    8GB KIT Crucial Ballistix Sport XT 1866 CL10 1.5v
    I’ve tried with two different 1866 sets just to be sure the kit isn’t broken.
    Doesn’t boot either with only one module installed.
    The system does boot and works with:
    8GB KIT Crucial Ballistix Sport XT 1600 CL9 1.5v
    I’m running the latest BIOS (v30.3) with an AMD A10-6800K.
    PSU: Corsair VS350
    I've already emailed USReview and their answer is to check the memory support list.
    But there's only three 1866 modules listed on that list, of which two are Micron.
    Crucial being a subsidiary of Micron only uses Micron memory chips.
    I would say that if you only claim to support such a narrow selection of 1866 modules then you can’t claim 1866 support at all.
    I'm building computers for decades and I never had to check any memory support list as long as I used quality memory.
    Has anyone had success with any 1866 modules on this board?
    I think it's pretty obvious that this board needs a serious BIOS update.

    I have exactly the same issue, a78M-e35 with 2x4gb ballistix 1866 CL10 && AMD A8 6600K
    Memtest86 5.01 gives lots of errors when RAM freq is at 1866 in BIOS
    Lowering it to 1600 => no error at all
    Passed that test in an asrock mb at 1866 with no errors
    I reflashed bios (last one in MSI A78M-e35 d/l page) with no results
    Any other thing I could try?
    thanks in advance

  • Mac OSX Lion 10.7.4 and Parallels (memory issues)

    I bought a 2011 Macbook Pro i7 2.2ghz with 4gb of ram, 5400 rpm 500gb hard drive.  Base 15 inch model pretty much. 
    I actually purchased it for a few reasons.  1) I had a 1200 dollar credit at a local electronics store and 2) I figured the battery life would be decent and 3) I was interested in playing around with Mac OSX a bit more.
    Long story short I still need to use windows for various applications and for work.  So I purchased Parallels since it seemed to have pretty good reviews and installed Windows 7 in one and Windows XP in one.  Giving them 2gb for 7 and 1 gb for windows XP.  Now since I knew I wouldn't have enough ram, I upgraded my ram to 8gb and upgraded the hard drive to a 7200 rpm.
    So this is where my problem is, I am unable to run both of them at the same time without Mac running out of memory and swapping like no tomorrow bringing the entire computer to a halt.
    In general Lion seems to be pretty slow, even without any virtual machines running.  I have done a reinstall of the entire OS, repaired permissions etc.
    So at this point I think I have come to the conclusion that the only solution is to again get more memory and go up to 16 gb, which is crazy in my opinion.  I also installed Windows 7 in bootcamp and then installed Vmware workstation and I can run 4 virtuals (1 windows 7, 2xps and a win2k3) before the base OS gets really sluggish, so it isn't the hardware, it is simply the OS.
    Case and point is my other laptop a Lenovo W700ds (for anyone who has seen this thing, it is a beast and has horrible battery life.. one of the reasons I wanted the Mac) runs a core2quad and has 8gb of ram but I usually keep 3 virtuals up without any hit to Windows 7.  But it also only gets 30-45 minutes of battery life, while my Macbook Pro gets about 2-2.5 hours of battery life with the virtuals running however everything runs like crap so I usually have to suspend and only keep 1 at a time open.
    My question being simply, is this normal?  Should better hardware have such poor performance or am I just expecting to much?  At this point my options are to install Windows 7 native (which i'd rather not do, I actually do like some of Lions features) or am I forced to buy even more ram?
    I was also thinking of getting rid of the superdrive and moving my main drive there and then getting a 256gb SSD as the primary.  But it seems to me at this point I am just dumping money into something that should already do what I want.  This would split the hard drive access load though.
    Any suggestions? 
    Thanks

    Honestly I would never run both Win 7 & XP at the same time in a VM. 7 needs at least 4GB to run properly and uses more resources then XP.
    I personally use VMware Fusion and XP. At this time there is no software, that I'm aware of or use, that does not run on XP. So for my Mac Win VM purpose I only run XP with the software in need to use in Windows. This work very well for me. I have 2 CPUs and 3GBs of RAM assigned to XP. Leaving the other 2 CPU cores, 4 HT cores, and 5GBs of RAM for OS X.
    Not sure why you need, or want, to run both versions of Windows at the same time. I don't see the need as stated above.

  • MacPro and WinXP Memory Issue?

    Hello. I am dual booting my MacPro with Leopard on a pair of RAID drives, and Windows XP on a third drive. The problem is that I have 16GB RAM in the computer. OSX uses all of it. But, when booting into Windows, it only shows that 2GB is being used. Does anyone know how to get Windows to use all of the RAM? I am NOT using bootcamp on the MacPro.
    Thanks,
    Scott

    Vista Business or Ultimate 64-bit. I never used XP or Pro so can't help there, but I do know that 32-bit Vista won't see more than 1.9GB. Apple's EFI does not properly support memory.
    Vista x64 does have support for installing and using GUID formatted drives and U-EFI 2.0 as of SP1 which is available as public RC1. I've been using Vista for 12 months.
    The BootCamp 2.0 drivers add a time synch service and other features that are helpful, but not perfect yet.
    I know I have some bookmarks about 64-bit versions and memory, but Mac Pro throws an unknown into the works. I'm hoping that next year's Mac Pros will have an updated EFI/BIOS. Not sure if we will see another EFI update - the last one added 20-30 seconds to my booting Windows, and no benefit that I could see.

  • Firefox lags after being open for too long, and has memory issues

    After having FF on for like 24 hours it starts to respond slowly to typing in text boxes, clicking links, and generally lagging the entire system until I restart it.
    Is there any way to fix this without restarting the program?

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    You can uninstall (remove) the Java Console extensions and disable the Java Quick Starter extension as you do not need them to run Java applets.
    See http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
    See http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0
    Disable the Java Quick Starter extension: Tools -> Addons -> Extensions<br />
    Control Panel -> Java -> Advanced tab -> Miscellaneous -> Java Quick Starter (disable)

  • Procedure and Function-Memory issue

    Hi,
    I have got code for maintaining cube.This code is generated by AWM while maintaining cube.This is nothing but the PL/SQL block with generated SQLs using following package and procedure.
    dbms_lob.writeappend
    I am running this PL/SQL block by putting in procedure.It is working perfectly in procedure but due to system requirement I need to turn procedure into function.When I run the same PL/SQL block in function,it gives following error:
    ORA-29532: Java call terminated by uncaught Java exception:
    java.lang.OutOfMemoryError
    What is the difference between function and procedure when same set of SQLs are running successfully in procedure and giving error in function.
    Can someone help me in this?
    Thanks

    When talking about PL/SQL only, everything that can be achieved with a function can also be achieved with a procedure using out parameters, thus you don't really need functions.
    However, a function may be used as a "syntactical convenience" in that you can write expressions like this in your PL/SQL code:
    total_salary := get_total_salary(dept_id => my_dept);
    (assuming you have defined the function get_total_salary).
    You may find this more readable than writing
    get_total_salary(result => total_salary, dept_id => my_dept);
    (assuming you have defined the procedure get_total_salary with an out parameter result).
    This is the same as with e.g. the CASE statement. You don't really need it, every CASE statement might be expressed with IF .. THEN statements as well. However using CASE may be more convenient and make your code more readable. Another example are loops, where you have different flavours, while everything might be expressed using one sort of loops (e.g. WHILE).
    In addition, you may use functions in SQL, while this is not possible with procedures, i.e. after defining some function f, you may write SQL like this:
    select * from t where f(id) = 0;

  • Memory issues in java3d1.2(openGL ver) and 1.2.1-03 sdk(openGL ver)

    hi ,
    i am working in java 3d and handling memory issues .I have made following observations.
    In java3d 1.2 version,when we close a primitive ,(transform group,point3d,transform 3d release) about 80% of memory used by the primitive when it was opened.but point4d releases only 2% of memory.
    on a contrary when i use java3d1.2-03 sdk point4d releases about 75% of memory and others(transform3d,transform group,point3d ) releases about 40% of memory allocated to them.
    can somebody tell me if there is some kind of difference in these two versions related to memory?or is there any memory bug in the later version?
    thanks
    sangeeta

    hi,
    We r using memory management tools like Jprobe and optimizer IT to count the rate of memory released.
    Thanks
    sangeeta

  • Firefox 3.6.8 and memory issues

    After the last update to 3.6.6, I disabled plugin-container per the instructions given on the forum, and my RAM problems went away. However, after the automatic update to 3.6.8, the memory problems came back, with memory usage going up to 92%. I downgraded to 3.6.4, and turned plugin-container off again; while memory usage is currently at 84%, it is not as low as it was before the upgrade to 3.6.8. (79-80%) (There is very little difference in the websites being opened on the various tabs.)
    == This happened ==
    Every time Firefox opened
    == I upgraded to 3.6.8

    ffs guys. It's a free browser. It's cool. We love it. But can we do something about memory issues? Almost every release has huge memory leaks.
    How about halving the release points and focus on memory issues for the other half of the time. I am a long time user since way back in the day and it seems to me that instead of trying to release so many versions, we should be focused more fixing the current release.
    I say put a moratorium on new features until bloat can be fixed. These experiences are starting to give me a hardon for IE again.
    Screw new features. I can deal with plain old tabs like they are. I don't need more bells and whistles. This browser has been kicking ass and taking names for a loonnnggggg time. We don't need more bloat. Keep the security fixes coming but everything else can wait. Take a breath. Stop and smell the roses for a few weeks.

  • IPad 1 and memory issues

    I mean this thing is slooowwww. Many apps crash back to the home screen. I have an app called System and it is showing Wired: 59MB at 36.56% What is this? Apps that are automatically on my iPad? Active shows 2MB at 13.90% and I have nothing running except this app. The reason I am bringing all this up is I was wondering is there any way to speed this iPad up? I mean the memory is atrocious! This thing is slow. And it is a brand new one that I got from the Apple store. Granted, it is not an iPad 2, as I do not have unlimited wealth, as Apple assumes we all do, it is the iPad 1. Maybe the memory issue is having too many apps downloaded? I have absolutely nothing running in the background as I close every app I open because the iPad is so slow and crashes even default email back to the home screen at times! I just want to make this thing faster like the day I first got it. Right now, it is serving as a paper weight as I can't keep anything running for very long. Things run smoothly, yes, but many things do not. Still wondering what this Wired section is, as it is taking up so much of my memory. I have only 88MB free and as soon as I open any app, that diminishes rather quickly.

    No it's not jailbroken. I will never do that to any of my devices. I am talking about memory. I have plenty of storage. Just tired of apps crashing back to the home screen.

  • I have a battery and Memory issue - late macbook pro 2011

    Macbook Pro 13" Late 2011 Model
    Battery Issue
    After upgrading to Lion, my batter life is 3 hours after full charge. It was 7-8 hours in leopard.
    Hoping this is a common issue and someone has a quick solution.
    Memory Issue
    I had 4GB Ram and found it would run to virtually nothing and not free any inactive RAM. I though the solution to this was to buy more RAM, which I did.
    I now have 8GB RAM and it agains runs to virtually nothing on non labour intensive software like safari or mail. It doesnt free up any RAM when it reaches a certain point. Instead it freezes and I'm forced to restart the computer. I use Final Cut Pro X and Photoshop/Illustrator fairly regualry. I'm assuming the RAM is is used with those but even when these are closed the RAM is low.
    Any ideas?
    Cheers

    You should take your Mac to an official apple retail store, as it is not common to have these problems regarding battery and memory.

  • Rendering and Low System Memory issues in PE9.

    Hello again.
    N.B: I am an ex-PE3 user.
    I am having a few issues with PE9.
    1. My main issue is that I am regularly getting the 'low system memory; please proceed with caution' message. I have googled it and read people's suggestions, but am not sure where to go from here. I have tried saving my file under another name, but am already up to '....E' (fifth) version of the file I've been working on this afternoon. The total time of the project is only approx 45 min's, although I will say that this 'low system memory' issue seems to be worst today, as I'm adding more still photos.
    2. One of the suggestions made by Steve G on one of the forums was to make sure projects are regularly rendered. When I hit 'Enter' to render, the little render window pops up for a split second and then disappears. And I would assume from the red line above my timeline that my file is not rendered.
    3. When I switch to 'Sceneline' view, my horizontal scroll-bar across the bottom will only drag SO far (to a certain point in my project; but definitely not to the end of my project. It is really frustrating. I sometimes can fix it by flicking between Sceneline and Timeline, but I have to do this multiple times... and it seems a ridiculous way to do it.
    It would be fantastic if someone could help me with these issues, please!
    System details:
    AMD processor 3.2 Ghz
    4 gig RAM (3.12 gig usable)
    Windows 7 Ultimate

    Hi everyone:
    Thankyou for all your suggestions.
    Sorry, Bill, but both those links give me an error message. I was all set to read them, but they won’t work, unfortunately.
    What is meant by ‘page file managed’, sorry? And do you mean ‘hard disk drives’ by HDD, or does it stand for something else in this context? I’m not sure what you mean by how do I have them allocated. Again, apologies for my ignorance. I do have only one HDD, but it is partitioned.
    The image sizes all seem to have a depth of 24, but vary in dimensions – I can see that some are quite large (around 3 mg in size, with dimensions of 4288x2848, for example). Is the actual mg-size relevant, or only the physical length and width?
    I have tried to look at the frame size of my project, but it seems to be greyed out. In pale digits, there is 720x576 written.
    Just before I sent this, I thought of one other thing to try first.
    I tried starting a ‘New Project’. I then inserted just 6 still photos, for experimentation purposes. I then hit ‘Enter’ and the Rendering window came up and appears to have rendered correctly. So I then tried looking at one of my other projects (that hadn’t previously been rendered) and tried to render it. In this case, as in for the project I am currently working hard on, the Rendering window flashes up for about ¼ of a second and then disappears.
    What is going on???
    From: Bill Hunt [email protected]
    Sent: Friday, 11 March 2011 2:00 AM
    To: rachel jewiss
    Subject: Rendering and Low System Memory issues in PE9.
    although I will say that this 'low system memory' issue seems to be worst today, as I'm adding more still photos.
    What are the pixel x pixel dimensions of those still images?
    What is the Frame Size of your Project?
    How is your Page File Managed, and what is the size? This http://forums.adobe.com/thread/632449?tstart=30 will give you some background and tips.
    Also, tell us about your HDD's, and how you have them allocated.
    For more discussion on Rendering, please see this http://forums.adobe.com/thread/794719?tstart=0.
    Good luck,
    Hunt

  • Updated my iPhone to new iOS6 and my Memory Loader app does not work!  Is there a fix for the problem as it seems I am not the only one coming across this issue?

    Updated my iPhone to new iOS6 and my Memory Loader app does not work!  Is there a fix for the problem as it seems I am not the only one coming across this issue?

    Other than what you have already done, you should clear the cache from your browser and, if you use it, your Facebook app.  Also, deleting old texts can free up some room.

  • Lightroom 2.3RC and Fast MBP Mac 10.5.6 Still Has BIG Memory Issue

    Lightroom 2.3RC still have a big memory issue on my Macbook Pro (Feb 2008) with 4GB of RAM both in 64bit and 32bit mode. After working on photos in a catalog (using Activity monitor) Lightroom causes my Free Memory to hover around only 10MB or less (causing Lightroom to continually hang or crash) while Inactive RAM sits at 1.5GB! Lightroom should be using this Inactive RAM rather than taking my Free RAM down to nearly nothing and causing freezes or crashes.
    This is not as much of a problem in 2.2 32bit mode, but is a problem on 2.2 64bit mode. However, now with 2.3RC this is a problem on both the 32 and 64bit modes. Please Adobe address this huge huge huge memory problem in Lightroom. Why does Lightroom 2.2 32bit handle memory pretty okay but not Lightroom 2.3RC 32bit mode or 64bit mode? Why did 2.3RC break what for the most part worked in 2.2 32bit mode (even though that wasn't too great either).
    Also I am only running Lightroom (no other programs). I admire the product Adobe, but this problem has persisted far too long and is making Lightroom unusable.

    Hmm. I've been sticking with 2.1 until hearing widespread reports of stability. Every time I checked the forums, I didn't like what I heard about 2.2 so I stayed away. I dropped by to see what the Mac users thought of 2.3. Have you tested on another machine? I assume 2.1 was good for you? Can't wait to see what others are experiencing.

Maybe you are looking for

  • Error while GR against a Purchase Order

    Hi; I need to post stock into QI status after GR for this,In material master Purchasing view i have post to inspection stock activated and the QM view does not exist.and while doing GR against a purchase order using MIGO i am getting a message "stock

  • Adobe Acrobat and Reader 9.0

    How do I create a document in Acrobat that I can then sign in Reader?  Both versions are 9.0.  Thanks for the help!

  • Outlook asking for credentials - only occurs after secondary mailboxes are deleted from exchange

    Hi there.  I've got a problem that just started popping up recently with our users.  Often, we will have a user leave the company.  When this occurs, an employee will often backfill the position and need access to the prior employee's e-mails.  No pr

  • Field won't take or submit data

    I have a form that I'm trying to update in a certain in-house web application. My problem is that the first field on the form seems not to exist.  I can view the field and its properties in the Designer, and the associated XML source looks valid, but

  • Programmatically Delete Portal user Cache

    Hi! I have a problem re-using the "Portal User Profile" portlet to put on my own portal page. It is not able to execute unless i am Portal Administrator (PORTAL). The requirement is that I need to clear the cache for a Particular User. <br><br> I twe