XML Validation in PI 7.1 - Restart and skip validation possible, but how?

Hello all,
I read about schema validation in PI 7.1 and did a few tests on my own, but could not restart and skip validation for invalid payloaded messages. The documents say it is possible.
Anyone know how? Thanks.
BTW, I really think putting the schemas in server file system will cause a lot of authorization trouble in enterprises. No one gives access to the server filesystem and I don't think they will also like to open the required subdirectories for share. Asking the basis team to create the folder structures and maintaining schemas would be another pain. Don't you also think that SAP could find a better approach, like automatically uploading the schemas to the filesystem, or validating them from repository directly if possible?
Kind regards,
Gökhan

Hi Gökhan,
I am facing the same issue.
I set up outbound xml validation in receiver agreement and tested it with valid and invalid messages.
The validation works fine.
But in case of validation error I tried to restart with skipping the validation. But this wasn't possible.
I am always facing the same valdiation error.
I already tried all different tools I know (sxi_monitor, message monitoring in rwb and in nwa)
I am working on PI 7.11 SP6
Did you find a solution for skipping the validation for a single message out of the monitoring?
I know that there is the possibility of deactivate the validation in receiver agreement but thid doesn't meet the requirement of skip the validation only for a single message.
Maybe anyone else faced and solved this issue already.
Thanks in advance
Jochen

Similar Messages

  • After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

    After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

    Try going into your settings and 'reset all settings'
    You will need to retweak your device but it's been said to help with sound issues.

  • I have problem  in signing in I don't like read and accept terms I cannot access this I don't know about this read and accept terms this is poor, I just like android's simple option and simple singing in, but how to use apple I'd?

    I have problem  in signing in I don't like read and accept terms I cannot access this I don't know about this read and accept terms this is poor, I just like android's simple option and simple singing in, but how to use apple I'd?

    Your computer is called an iMac.
    Did you turn proxies on?  If so, you should turn them off.

  • I have purchased an app from the app store and cannot seem to download it.  I have tried restarting, and checked my connection but this seems to have no effect.  I have also downloaded other (free) applications since then and some of these download

    I have purchased an app from the app store and cannot seem to download it, the download statrs and then rapidly cuts out, it will not complete and seems to repeatedly go over the same few Mb.  I have previously downloaded large files and not had a problem with them.
    I have tried restarting, checked my hard disk (and repaired a sector of the disk) and checked my connection but this seems to have no effect.  I have also disabled virus protection and my firewall to see if this has an effect.  I have also downloaded other (free) applications to test it since then and some of these download but not the larger ones.  Has anybody else encountered this?  Does anyone know how to solve it?

    Can you download large files from other places apart from the App store, wondering if it is the App store or your internet connection.
    If it just the app store check this url http://www.apple.com/support/mac/app-store/contact/

  • Help!!!!!!!! Just did update on computer mac book, then went to restart and will come on but with turn off and restart over and over and over

    just did update to my mac book, then clicked ok to restart, but the computer came on then will turn off again then come back on and turn off over and over again
    HELP PLease!

    Turn the computer off by holding down the power button, then get your original DVD that came with the Macbook insert it in the DVD drive as soon as you can and then hold down the "C" key while the computer restarts and then run disk utility on your hard drive, also repair your permissions. 

  • TS2570 tried restart and hold c key, but still only getting white screen with grey apple logo and spinning loading icon, what do I do next?

    nephew had mutliple tabs open and shut down the iMac by hitting the button on the back instead of closing everything corectly.  Now the only screen i get is the white with apple logo and the loading circle icon.  i have attempted restart and c key with disk in but cant even get a menu to come up.  What can I attempt from home before having to haul this into the store? 

    wireless keyboard and mouse were working prior to safe mode attempt, i was able to eject disk.  still waiting on the safe mode restart.  I'm not sure what I should be looking for to confirm safe mode and what the screen should look like if successfully processing.  it seems to be putting off a lot of heat.  BRB
    Message was edited by: FeydakeeeeenHelpMePlease

  • New ipod nano 4th gerneration. cant sync to itunes or computer. ive reinstalled and restarted and restored. what next? how do i get it to sync so i can put music on

    help

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • I just got a new labtop and already downloaded itunes, but how do i get all my music to show up on my new computer?

    I Just got a new labtop and already downloaded itunes onto it, but how do i get all my music onto my new computer?

    Copy the entire /Music/iTunes/ folder form your old computer to /Music/ on your new computer.
    FYI: It's a laptop because it sets on top of your lap.
    Labtop is a roof over a science room.

  • I would like to uninstall firefox 4 and then reinstall it, but how do I save my book marks?

    I would like to uninstall firefox 4 and then reinstall it, but I don't want to lose all of my bookmarks. The actual problem is a persona that won't stay changed. We change it, but every time we close Firefox it goes back to the Persona we changed it from when we start up Firefox again. I was just planning on uninstalling and reinstalling Firefox, but, like I said, I don't want to lose my bookmarks. How do I save my bookmarks in Firefox 4?

    You could always remove/disable the Persona that you don't want. Go to Add-ons > Appearance, and then just disable/remove the offending Persona.
    Though, if you really want to save your bookmarks:
    Bookmarks > Show All Bookmarks > Which will open the Library > Look for Import and Backup > Backup...> and it will prompt to you save the file somewhere. To add them back into Firefox, go back to the library > Import and Backup again > Restore > Choose File... > and then open the file you saved earlier.

  • I need a quick answer!, I installed Creative Cloud and photoshop within it, But how do i open photoshop?

    OK, I downloaded creative cloud in order to get the free trial of Photoshop, while inside the creative cloud i installed Photoshop, it say's it's done downloading, but how do i open up Photoshop?
    I can't find it in my library and when i'm inside the cloud program i can't just click the Photoshop picture to open it..
    What do i do?

    Thank you so much sir!
    I'd rate 5 stars if i could!

  • Music cuts off on three tracks about 30 seconds in and skips to the next. how do i fix it?

    I downloaded an album and the music cuts off on three of the tracks about 30 seconds in and skips to the next. can i fix it, if so how??, i would really like these tracks for when im running and its driving me nuts

    Hey Apollo10,
    That definitely sounds frustrating. If the songs are not playing fully in iTunes, they may need to be redownloaded. After you have redownloaded the songs, they should play fully and you can enjoy them when you go running. If not, please let me know.
    Songs in iTunes may not play back completely
    http://support.apple.com/kb/TS4357
    Symptoms
    Occasionally, if a song purchased from the iTunes Store on a Mac or PC was not downloaded completely, the song may not play back fully. The song may abruptly stop during playback, and iTunes may start playing the next song in your library or playlist.
    Resolution
    If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
    1. Delete the purchased song that is exhibiting the problem from your iTunes library.
    2. Click on the Purchased link in the iTunes Store to view your previously purchased music.
    3. Download your previously purchased song from this list.
    Note: iTunes in the Cloud, which allows you to download previously purchased songs from the iTunes Store, is not available in every country. Learn if iTunes in the Cloud is offered in your country
    Thanks,
    Matt M.

  • XML Validation using java for SQL Injection and script validation

    I have an input coming from xml file.
    I have to read that input and validate the input against sql injections and scripts.
    I require help now how to read this xml data and validate against the above two options.
    I am a java developer.
    in this context what is marshelling?

    http://www.ibm.com/developerworks/library/x-javaxmlvalidapi.html?ca=dgr-lnxw07Java-XML-Val
    http://java.sun.com/j2se/1.5.0/docs/api/javax/xml/validation/package-summary.html
    The following code validates the xml against a xml schema
    // define the type of schema - we use W3C:
    String schemaLang = "http://www.w3.org/2001/XMLSchema";
    SchemaFactory factory = SchemaFactory.newInstance(schemaLang);
    Schema schema = factory.newSchema(new StreamSource("sample.xsd"));
    Validator validator = schema.newValidator();
    // at last perform validation:
    validator.validate(new StreamSource("sample.xml"));Message was edited by:
    haishai

  • HT2693 How come my apple map doesn't show the map on apple standard map.. However, it does work on google map. I was trying to close the apple maps, restart, and many other ways but still didn't work. Please help me.

    A standard map on my iPhone 4s is suddenly not working. It shows the blue dot but it doesn't show the actual Map where I can see the streets.
    I don't know how to fix this problem. I did try so many ways even restarted iPhone but still not working... Please help me out.

    Hi JinHDK,
    Yes I worked previously but it's now not working. I did double click home botton and terminate the maps many time but still not working.
    The standard maps just not show any route only the blue dot (my location.)  I really don't know what to do. Btw, I used to live in SF but now I'm traveling to Thailand. One of my friend is using iPhone 4S as well but his maps is working. So I guess it is about its application on my phone...
    Thank you.

  • I have up-dated to Lion on my iMac, on start up it opens in safety mode, I then I need to restart and all is fine. How can I rectify this?

    I have up dated my Imac to Lion, on start up it opens in the safe mode, if I restart it the system works just fine. What would the problem possibly be?

    Check system preferences to make sure you have iCal and your photostream checkmarked to TRUE.
    If you still have problems, give us more details.
    Also, make sure the calendar in iCal you're using/looking at is not "On My Mac", but actually an iCloud one.

  • Valid apple id rejected in imessage and facetime, valid apple id rejected in imessage and facetime

    I have an ipod touch on ios 5.1.1 and I am unable to activate either imessage or facetalk.
    The error i get is that my username or password is incorrect
    I am completely sure i am using the correct password, I use it all the time to download apps.
    I tried to log in about 10 times, and was very careful to check the password was being entered correctly (I watched that all the pop up characters were the correct ones)
    Right after this happened I updated an app to test my apple id was working, it asked me for the password and I entered the same one that is being rejected by imessage and facetalk - it worked fine (as it always does ) to update an app.
    I am connected to wifi (can download apps, browse the web, check email etc and can see that i have a wifi connection - there is no firewall etc on the connection i am using
    Can anyone suggest why this is happening? I have browsed other threads and do not have an old username which is not an email (I have not ever used either of these apps before)
    As above I am absolutely 110% without-a-doubt sure that I am using the correct valid apple id and password (which i also used to download an app update on the same device, then to log into this forum)
    Other things work fine on the ipod, it is just facetalk and imessage (and apparently imessage depends on facetalk to work?)
    The steps I have taken are as follows:
    touch app
    get started screen displayed
    touch get started
    - enter apple id screen displayed - correct email already displayed
    I enter the CORRECT (trust me on this one is IS the right password)
    click sign in buttonnavigated to next page which asks me to enter the email address I wish to use - there is an email address already there - a different one - but one of mine, (no idea how it got that - maybe because it is my facebook email and i have a facebook ap on the ipod linked to this email
    anyway before i can change the email or if I leave it as it is and click next, it diverts me back to the sign in screen
    error message is
    "you were signed out of FaceTime because your Apple ID or password changed.  Sign in to turn on facetime.
    I can then try and log in again, and repeat ad-infinitum, the steps above never getting past the email address page
    Why does it think i have changed my password? I have not (and i am still able to download apps, log into this forum etc using the exact same login that i have alwys used since purchasing the ipod in december 2011)

    I was able to get it working by logging in with an alternative email address. My primary email address/user ID for my iTunes account is my Gmail address, and that throws up the error whenever I try to log into FaceTime. When I log in using my iCloud email as the user ID, which is of course tied to the same iTunes/iCloud account, it works fine.

Maybe you are looking for