XML/XHTML & Intel Mac failures?

Following up with my MacBook Pro issues from earlier threads,
Has anyone experienced issues using intel macs to edit XML or XHTML
code/design?
I hear users saying that their Intel Macs are good in DW, but
are you using XML/XHML?

Similar Messages

Need help with Intel Mac mini... potential logic board failure...

Hey everyone! For the past couple years, I've been using an Intel Mac mini which I was able to afford before rough times hit for me. It has been a champ for a long time, until recently. In the past week, the clock would lose time ever so often, and last week, whenever I'd try to power it up in the morning (as I shut it down every night), it wouldn't start up most times (meaning, you hit the power, nothing... no LED, no fan, nothing on screen, nada). After a while, I would somehow manage to get it to start. I assumed at this point, the lithium battery (coin type CR2032, not the traditional 1/2 AA purple battery) was shot. Since I'm in the middle of a job transition, I was waiting until I had time to put in a new battery, which I was planning to do this weekend. Then Wednesday happened...
I go to start it, nothing... A week before this, I started losing time and sometimes it would not boot. I figured eventually I would be able to start it since I was able to sometimes get it to start after a half hour or more. That didn't happen. So I decided to go ahead and swap in the new battery. I do that, power it up, nothing. I reset the SMC (same as PMU on the PPC Macs), to no avail. I reseated the RAM, and did everything I could think of, but it's deader than Elvis. I also had took the power supply to a guy who had a voltimeter. He said voltage was getting to all pins.
I went back and read some of the archives on this board. Someone mentioned something about a repair exception. It mentioned that sometimes if you call AppleCare (even if you don't have it) and ask for a repair exception, sometimes they'll agree to have the logic board replaced due to it being a documented problem. How true is this and who should I contact?
Can anyone suggest anything here? If I can't revive the mini, I may have to drag my iMac back out and try to set it up to run OS X. I can't no where near afford another computer at this point. I'm praying the mini can be fixed. I would appreciate any and all suggestions!
Thanks in advance!
Tommy

It does sound like the logic board has gone bad. However, there are no current repair extension programs open on the Mac Minis.
This page lists the open extensions:
http://www.apple.com/support/exchange_repair/
So that's not an option. I assume that the Mini doesn't have AppleCare (whoops.), so I would not count on Apple covering it, but it's always worth a shot. You can call AppleCare (1-800-275-2273) or visit your local Apple Store

Hardware failure code on intel mac mini???

intel mac mini 1.5 ghz
1gb of (mac) ram
running OS X 10.4.8
got this hardware error message
4SNS/1/40000000:"TAOP"
any body got any idea what that means
mac mini 1.5 ghz Mac OS X (10.4.8) 1 gb of ram

MacVSmac, welcome!
Googling for your error code reveals very few hits, most of which are not in English, so a bit more background would be helpful in tracking this down.
Has the RAM been upgraded on this Mini? If so, how?
Are you getting some kind of operational problem with the Mini? If so, what? Fan noise?
Is the error code TAOP or TMOP?

Bootable Backup on Intel Macs?

I read this on the internet. Has anyone checked this out?
A Bootable Backup for an Intel Mac
Shortly after I got my shiny new 20″ Intel iMac I read in a forum somewhere that booting from an external firewire enclosure was no longer supported on the Intel-based Macs. I was disappointed to hear this, because I’ve used this feature on my PowerMac in the past to great advantage, it makes upgrading your system hard drive very easy, and the same would apply to recovering from a hard drive failure.
I decided to try anyway, so I connected my IoGear Ion external firewire drive to my iMac and started a disk cloning operation using Carbon Copy Cloner, a very popular Mac backup program that works well on my PowerPC based Macs. It kept asking for my Admin password, and it eventually locked up without having finished the backup.
Then I tried LaCie Silverkeeper with no luck either.
Next I bought a shareware license for a program called ChronoSync, which seems to be well written, but also failed at the task of creating a bootable system backup. In a later email exchange with the author of that program I was told that kind of an operation was “not supported”.
Finally I tried Synchronize! Pro X from Qdea, it worked. In only 3 hours it copied 182gb of data across a firewire connection to my external drive, and the OS X Startup Disk preference pane saw the disk as bootable. I’ve done a test boot, and it worked flawlessly.
I like to keep a mirror image backup of all of my computers. It has saved my cookies (literally and figuratively) on more than one occasion. I did have to pay $99 for a license for Synchronize! Pro X, but I consider it to be money well spent.

Well... If you are using CCC, the only way to use it to restore would be to start up from the bootable backup and run CCC from there. Unlike Disk Utility, CCC can clone the disk being used for startup; Disk Utility want the "source" disk to not be "busy." On the other hand, if you are using Disk Utility from the Mac OS Installation Disk, the backup does not need to be bootable. The backup can even be a disk image, which has the advantage of not occupying the entire external drive.
A bootable backup has several advantages. First, running from an optical disk is slow if you are going to be making backups at regular intervals; I'm not sure if want to boot from the Mac OS X Installation Disk so often. Second, the bootable backup will serve as an emergency boot disk to diagnose problems that you may have with the internal drive. If you buy tools like DiskWarrior and TechTool Pro, you can run them from there.
If you want a full identical copy of the internal drive, the following would be ideal... Get an external drive that is larger than the internal drive. Partition it so that it is bootable for Intel and with TWO partitions. Make the first partition about equal in size to the internal drive (it can be somewhat smaller since you will never fill the internal drive to 100%). Make the second partition the rest of the space.
Use CCC to make regular backups of the internal drive to the bootable second partition. As an added precaution, copy just your user directory to the second partition and keep it in sync with the one on the internal drive. You can do this manually, or with a tool like ChronoSync. Why the second user data backup? Because during the time when you are using CCC to clone the internal drive to the first partition, there is risk. At that moment, the previous backup is gone, the new backup is being written, and the "original" is actively being accessed. If there was a internal hard drive failure, or a power failure, you could lose the original and not have a backup. But if you have that user data backup on the second partition, at least you did not lose what's most important. Though inconvenient, you can always spend a day reinstalling the OS and apps from scratch.

System Image Utility 10.4.7 doesn't know about Intel Macs

After updating my server to 10.4.7 today, I set out to update my network install image for my lab Intel iMacs by adding the 10.4.7 package to it.
Using the new 10.4.7 System Image Utility, however, I was not able to apply the correct Intel iMac filter, as none of the Intel Macs were visible in the list. I downgraded to the previous 10.4 version, and was able to see the Intel options in the filter list.
Is there any problem with using an earlier version of System Image Utility 10.4? Is there a way to patch the new version?

Hello TomTom fans,
I am Having exactly the same TomTom Go 910 USB issue since I updated from 10.4.8 to 10.4.9
Thinking that might be a USB hardware failure on my 910, I connected it to a Windows XP PC and it works fine.
I therefore pretty sure that the problem comes from 10.4.9 or from a security update.
I sent a message to TomTom but have not yet received an answer from them.
Having seen that there are a few problems reported in this forum due to the upgrade to 10.4.9, I suppose that we will need to wait for some fixes from Apple.
Cheers,
Philippe.

Replaced HDD on intel mac and it wont boot

Hi , My mom bought an Intel mac a couple years ago and it had a harddrive failure , instead of taking it back on warraty she put it in the closet.
So I thought I'd put a new drive in it and shed be happy.. so I bought a seagate 2 TB drive in it , but it wont boot , it just goes to a folder and question mark.. I cant seem to find a boot menu anywhere .I've tried all of the ways to get to the boot menu but nothing seems to work. I inserted the osx disc one and it accepted it but now wont eject it.. I'm just a bit frustrated ,. anyone have any advice ,
Thanks

You must first prep the drive then install OS X.
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

Intel Mac Mini stuck in reboot loop

I just upgraded the hard drive in my 2007 intel mac mini core duo. Drive formatted successfully, contains GUID Partition Table.
OSX 10.5 installed successfully.
Machine rebooted, I ran software update to 10.5.7 successfully.
Upon installing Adobe Flash Player, Adobe Acrobat Reader, machine began to react slowly to commands.
Rebooted machine, went to Grey Apple Screen with spinning dash wheen icon.
Machine rebooted itself, once again going to the grey apply screen with the spinning wheel.
After about 15 minutes of letting the continual reboot cycle happen, I inserted the installation DVD for 10.5, held the power button in to power off the machine, and booted from the disk.
I ran disk utility. Disk Utility shows the hard drive, shows the partition (GUID Partition) correctly.
I Verified Disk, which verified as "OK"
Repaired permissions.
Restarted machine.
Once again, it loaded to the grey apple screen, stayed there with the spinning dash wheel for about 3 minutes then continued to reboot over and over (everytime it reboots it sticks on the grey apple screen for 3 minutes before rebooting.
I once again powered off the machine and reset the PRAM.
Machine stuck again on reboot cycle.
I powered off the machine and reset the mini's SMC.
Machine is still stuck in reboot cycle.
I have also taken the mini back apart and verified that all RAM and connections are seated properly.
Any advice on what to do at this point will be very helpful.

+And I promise I will not download and install a hundred different programs this time.+
Good idea.
Any time you install software in OSX, there is a small, but finite, chance that the installation process won't be able to access a needed file because it is in use. This can mess up pre-binding, or even prevent files from being updated.
So the best advice is not to run any other programs while doing software installs or updates. And when in doubt, run DiskUtility afterwards and fix permissions one more time.
I cringe whenever I think of a post I read a while back about a Mac user who boasted about what music he likes to run in iTunes while doing system software updates. Not a good idea. It's "Russian roulette" with maybe 99 blanks in the "gun", but one real bullet that can kill your Mac's installation.

Installation problems on Intel Mac. claims PPC

I'm trying to install the current Flash Player 10.2 on my Macbook 6,1 (Intel Core 2 Duo, 2.26GHz) with 4GB RAM, running OSX 10.6.6
Browser is Firefox 3.6.13 {Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13}
I got the installer from http://get.adobe.com/flashplayer/
The installer puts up a message: "Devices with PowerPC processors are no longer supported"
How can I convince the installer that this isn't a PPC machine ? Why might the installer think so ?

Hi, What browser are you using to try to Uninstall/Install FP vs 10.2? And when you Install 10.1, what browser are you using?
There is no Flash Player support for a 64bit browser. I have been very busy on the Forum and have not had time to check on the 10.3 beta. Not sure what it refers to. Have you? Just asking as I've seen it mentioned on another thread, but it's from those complaining about 10.2 not working. Why anyone would want a beta Installed unless they are involved in the testing and are Developers I don't know.
Any beta is a work in progress, so as long as a user is aware of that it's ok with me. Microsoft has their IE9 in beta too, but with an beta one can expect problems.
Since the 10.2 is not Installing, then I don't think you'd receive any code, do you?
I'm not as familiar with the Mac, but is it possible to upgrade the OS from a PPC to the edition you have now?
I'm going to check a couple of things while you let me know on the above browser info. Also any comments would be welcome:-)
Thanks,
eidnolb

Bluetooth Not Available on Intel Mac mini

I keep losing the Bluetooth wireless connection between my Apple wireless mouse and keyboard and my Intel Mac mini (which is running Mac OSX 10.5.5)
Tried re-booting but it doesn't always come back.
Looked in System Preferences, but if the connection is lost, Bluetooth has disappeared as if not installed. If the connection is present then all seems OK. You can check battery levels etc.
Left to itself Bluetooth can re-appear sometime later as mysteriously as it disappeared, maybe after half an hour or so. Very annoying as I have to result to using an Apple USB mouse and keyboard when the connection is lost.
Tried running Bluetooth Updater but it says I haven't got Bluetooth if the connection is lost! But it came pre-installed on purchase. Problem only seems to have started since upgrading to Leopard. Never had this problem with Tiger.
Any thoughts would be most welcome.
regards,
BJ

Ok, I've resolved this on my machine, at least for the time being.
Here is what I did. I am not advising anyone else to do this and I am in-no-way stating this will fix your problem. I'm just relaying what worked for me. If anyone chooses to try this then it's on their own head!
I opened my Mac Mini and located the Bluetooth circuit board just in front of the rear power button. I removed the small phillips screw holding the board in place and noticed that the connector that connects the board to the main motherboard was not seated well. I removed the connector and reattached it, making sure I felt the 'click' as the connector was pushed home.
I had also read on the net that the routing of the bluetooth ariel cable may cause problems due to interference from the USB ports. I took the opportunity to extract the ariel and run it over the disk and away from the USB ports. Before putting the lid back on I booted up to check Bluetooth was working again.
So, I now have my Mac Mini with Bluetooth working again. We shall see how long this lasts - perhaps the root cause was a loose connection, in which case it may be fixed permanently now. I shall report back in a few weeks.
Be aware that opening your Mac is going to invalidate any warranty. Mine was out of warranty anyway so I was not bothered. I've also got a degree in software and electronic engineering so know my way round the insides of computers. Please make your own assessment of your level of expertise before deciding to try what I did. It may not work for you anyway!

Text-wrap problem ID CS3 on Intel Mac

I've recently been upgraded to an Intel Mac workstation running Leopard and for the most part, the transition has been smooth. However, I just noticed today that I cannot get "detect edges" to work on a text wrap around an object with a transparent background in a placed Photoshop file. The detect edges only works if I have a white background. I've never had this problem before, so I wonder if it's a result of my new computer. I use this function of text wrap constantly, and I'm hoping someone knows if this is a known bug and if there is a work around.

You don´t have to use detect edges feature for extracted PSD-image.... just select a proper Contour Options Type, Alpha Channel for instance.

I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW.

Can I use OS9 as the start up disk on my Intel Mac?

I have a new Intel iMac. I want to partition my hard drive, install OS9 and run the old system. I know I can't use "classic" on 10.4.7 but I wonder if I could simply install OS9 and reboot my computer. I don't need to move between the two, meaning I don't need to work in OS9 then instantly click and be in 10.4.7. I can deal with the inconvenience of rebooting.
I'm having 3 problems
#1, I have an old version of Photoshop. I'll buy the newest Photoshop someday but the latest version wasn't made for Intel Macs and it is very expensive. $600. I wonder if it runs slow on Intel Macs. Maybe I should wait for the next version.
#2 I have a great Epson printer (875 DC) but Epson has not updated the print drivers for this model and probably won't. OK fine I can buy a newer better photo printer $550.
#3 I have a "Nikon Coolscan 4000" film Scanner $1,300. This scanner is great in OS9 but the thing never worked in OS10 and now that I have this Intel iMac I downloaded the latest software update and the thing still doesn’t work and if the computer sleeps while the Nikon software is open it won't wake up and I have to restart.
To sum everything up, can I run OS9 on my Intel iMac? I don't care if I have to work in OS9 then shut down and restart to work in 10.4.7 Can this Intel iMac understand OS9. If I try to restart using OS9 as the startup disk will I damage the computer? Will I screw things up and have to spend hours and days removing files and correcting problems?
I feel like this computer is a fresh clean new baby and I'm afraid that if I start messing around with it I'll regret it.

Hello,
I have a new Intel iMac. I want to partition my hard
drive, install OS9 and run the old system. I know I
can't use "classic" on 10.4.7 but I wonder if I could
simply install OS9 and reboot my computer.
The problem here, is that the OS 9 environment / Operating System will only run on a PowerPC processor.
The only reason that OS X will run on either processor, is that it was specifically designed to do so from the beginning.
But, OS 9 and older were specifically written for the PowerPC / Motorola processors.
So, you will need a machine with a PowerPC processor to run OS 9.
Currently, there is one program that will enable OS 9 to run on an Intel Mac. But, it requires making a copy of the Power Macintosh ROM. So, it's legal use is questionable at best.
http://www.gibix.net/projects/sheepshaver/
This program works by emulating the PowerPC processor. And, it is reported to operate at roughly 1/8-th of native speeds. So, it could be pretty slow for productive photo work.
#1, I have an old version of Photoshop. I'll buy the
newest Photoshop someday but the latest version
wasn't made for Intel Macs and it is very expensive.
$600. I wonder if it runs slow on Intel Macs. Maybe I
should wait for the next version.
If it is a Mac OS X version, then it will run on the Intel systems. But, yes it will be slower. Usable, but slower.
I haven't tried this program, so I cannot personally comment on it. But, even Steve Jobs admitted it was slow on the Intel Macs.
#2 I have a great Epson printer (875 DC) but Epson
has not updated the print drivers for this model and
probably won't. OK fine I can buy a newer better
photo printer $550.
OS X comes with drivers for the Epson Stylus Photo 875. They are provided by the Gimp-Print layer. But, installed / select just like any other printer. So, as long as you can connect the printer using USB, then you can select the driver for the 875 and be fine (as long as this is the same printer).
Otherwise, some people have reportedly installed PowerPC print drivers without trouble. I haven't tried it myself.
#3 I have a "Nikon Coolscan 4000" film Scanner
$1,300. This scanner is great in OS9 but the thing
never worked in OS10 and now that I have this Intel
iMac I downloaded the latest software update and the
thing still doesn’t work and if the computer sleeps
while the Nikon software is open it won't wake up and
I have to restart.
Can't really help you there.
To sum everything up, can I run OS9 on my Intel iMac?
I don't care if I have to work in OS9 then shut down
and restart to work in 10.4.7 Can this Intel iMac
understand OS9. If I try to restart using OS9 as the
startup disk will I damage the computer? Will I screw
things up and have to spend hours and days removing
files and correcting problems?
As mentioned above, the only method currently available to use OS 9 on an Intel system is that SheepShaver program.
But, I would not expect good results with it for your uses. And, it's legal status would be questionable since you need to copy a ROM file from another Mac to use it (which goes against Apple's license agreement).
I feel like this computer is a fresh clean new baby
and I'm afraid that if I start messing around with it
I'll regret it.
Just make sure you have a good backup of everything before you start experimenting.
I hope this helps.

Intel Mac mini and widescreen TV output (analog)

I just replaced my 1.25 GHz mini with a dual-core Intel one, and are really disappointed that the wide-screen resolution options are nowhere to be found. I'm using the Apple DVI-to-Video adapter with an S-Video cable.
On the G4 Mac mini, I would get 640x480 (NTSC 4:3), 800x480 (NTSC 16:9), 768x576 (PAL 4:3) and 1024x576 (PAL 16:9). Together with Overscan and Best for Video, I got a really nice picture on my 16:9 CRT TV (can display PAL and NTSC in either 4:3 or 16:9).
With the Intel Mac mini, I only get 640x480.
(The other available resolutions do not match with the actual NTSC or PAL frequencies or aspect ratios. For example, 720x480 or 720x576 is used as the pixel format for some digital media, but the pixels are not square, and so far, all software expects display pixels to be square. So it's actually quite useless.)
Is there a trick to get those resolutions to show up in Displays and become usable?

1.) I am using either 1920x1080 (interlaced) which is the resultion that has the worst problem with text sharpness. Now, I have discovered the Zoom feature in OSX and I can use it to some degree to make things readable. This may be my best option.
2.) I have done the calibraton and it does look quite a bit better. Those the DVD output is good but not great.
3.) Apparently, from what I have read, this is a common problem. Maybe a driver upgrade from Apple or Intel could fix?
I bought a Philips DVI cable. I know it's not the best but it should suffice. Monster cables seem to be overpriced. I plan to hook my PC to my HDTV with the same cable. My ATi card supports HD resolutions as well.
I also hooked the mini to my CRT that I have on my Dell and it looks very good there. I am impressed that OSX adjusts the resoltions that it can display upon boot. Even which switching displays.
Intel Mini Duo Core Mac OS X (10.4.5) 512MB RAM

Need Advice: New Intel Mac Mini Still In The Box

Hi!
Okay.. I know... I have several posts going here as I have several issues I am trying to solve rather simultaneously. Thanks for being patient with me.
I have my old 1.25 Ghz PowerPC Mac Mini running 10.4.11 and all was well and happy. Then Security Update 2007-009 happened and all went to ....well... you know and, yes, it was bad! Went to Apple, got it running of sorts as they re-installed the OS, but they used an old version of OS X. (10.4.7. Can you believe that?) This caused other problems. It continues to have all sorts of difficulties, as I have had to get applications to re-recognize that the computer is back up to 10.4.11. Currently, I am struggling with trying to get iTunes to access it's music folders on the external hard drives. Realized that I hadn't even gotten around to figuring out whether or not some of my other applications work, like some of the games and third party, etc.
The thing is I got a new Intel Mac Mini for Christmas and it's still in the box because as I suspected I need to get my old mac perfect again before I can even think about migrating stuff over to the new Mac. But.. here's the thing... it's starting to look pretty much like 2008 will come and go before I can get the old Mac ready enough to take the new Mac out of the box. This really is rather silly!
Now... I can't get the old Mac to see the music and it made me think. I have all of my iTunes music and iPhoto backed up on an external hard drive (I used Apple's "Back-up" software to do it) and in addition to this two complete copies of the iTunes music and iPhoto photos albums on two separate external hard drives. Should I just forget using migration assistant? Can I get my music and my photo albums into the new mac directly from the external hard drives?
Or...can I use "back up" to restore the music and photos into the new Mac?
I am starting to think that the best way to get my new Mac running is not risk it by attaching it to my old Mac. What do you think?
Thank you so much for any advice or experiences you can give. -Charlotte

I know that I am vacillating back and forth as to what to do. Thanks so much for being patient with me. All of your advice is really appreciated and I am at least closing in on deciding on my strategy. Probably will follow your first response advice, especially considering that some of the third party apps may not have updates to handle Leopard quite yet. Anyway... it's a good strategy since everything is on the externals anyway.
You can say that fine.
Ha ha ha.... yes, I've been messing around with computers since my parents bought our first Apple computer back in 1979. Just like you, I've never had a serious problem with any of the computers and we've had them all, running all sorts of things from the Original Apple and Apple IIc (which my parents still have and it still runs!) to the Commodore and all the Windows permeations and then on to the Macs running Jaguar, Panther and Tiger, probably because we've always been careful with the machines and what we install in them and how we update them. I have always kept my computers on UPS' and un-plug them when storms brew outside. As it is I am still using my eight year old Windows 98 computer, (for games mostly) and it still runs quicker than most peoples windows pcs and it's only a 740 Megahertz.
I haven't had to re-install anything, especially on this lovely little Mac Mini until now and wouldn't have in this situation, had I known more. I had taken the little Mac Mini in for a Procare "Tune-Up," only four days before the big up-date disaster. Not sure what they did to my mac in the tune-up but the guy gave me back the machine assuring me that the computer was perfect with no problems in answer to my asking "were they sure?" Even after the Genius Bar techs at the Apple Store re-installed the OS to fix the big problems it seems that no one ever thought to run verify disk. Had the Genius Bar techs at the time of the tune-up done this, or at least told me to do this, the last security update would not have wrecked so much havoc. It was only after I got the machine back from Apple that second time that I found that the directory had been corrupted when I ran disk verify. Actually it is amazing that I have had this little Mac Mini for so long and so not have had any problems on it that I would be able to go so long without having to know this really pretty important aspect of keeping one's mac in good running shape. I had been running maintenance scripts and permissions verify and repair and thought that was all there was to it. Silly! You know... that really is a testimony of how nice these little machines are.
Anyway... experience is a good teacher and I have learned so much it's actually been great! This stuff is pretty interesting.
Now... on to Leopard!
Thanks so much and you have a great New Year! -Charlotte

I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

You run Windows in Parallels or Fusion. Then in Windows you install the program.

XML/XHTML & Intel Mac failures?

Similar Messages

Maybe you are looking for