XMLDocument.Validate works on some machines but not on others

Hi All
I have a problem which I cannot Solve , I have a routine that Validates a node in a document against a XSD file using the XmlDocument.Validate method. This works fine on several machines but on a different network using the Same Document and schema files validate fails with a validation exception element not found . I cannot figure out why the exact same files and application should be successful on one machine and unsuccessfull on another. I have used Filemon to see if their are ACCESS DENIED problems but there are none.
I have reinstalled the framework 2.0, to no avail
Regards

I am trying to Get the Details on to an HTTP server no luck yet, and this fourm says that the files are to large to upload. , I have noticed the FILEMON says that the MSCORLIB.PDB file was not found in two locations WINNT and WINNT\dll would this have somthing to do with the problem. I have given the XML and Schema files to others to view but they confirm that there is nothing wrong with the file or the schema.

Similar Messages

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

Classic - text ringtones work for one contact but not for others

Just got the new Blackberry classic. I'm having trouble with the ringtones for the text messages. The custom ringtone works for one contact but not for the others. I have taken the same custom ringtone that works for contact A and used it for contact B but it only works for A. B sounds the default ringtone from the default profile instead of the custom ringtone.
I have deleted all contacts and done a re-sync thinking something was corrupt. That didn't work.
None of the contacts have a link.
I have changed the notification profile and it still doesn't work.
I have deleted a contact and recreated it manually. It still doesn't work.
I finally deleted my dad's contact and from the phone app created a new contact. I set a custom ringtone for him and it worked. I of course had to recreate all his other information manually. Please tell me there is some other way to fix this than recreating manually all 147 contacts in my contact list.
I read that if the phone number has the hypen or space it won't work, but my dad's contact info that I created from the phone app has the hypen and it rings with the custom ringtone. Also contact A has no hypen in the phone number and it rings the custom ringtone. So that didn't seem to matter.
I have spent hours on Google and see that lots of people have had this problem (but not everyone) but have not yet found a solution.
Surely someone has found a fix for this issue.

Make sure that the contact has "Mobile" as the field for her number and not "iPhone".
Note that the iPad cannot send SMS messages.

Magic Mouse One-Finger Swipe Works for one user but not the other

For the main account on my iMac, I can use a single finger swipe to move back and forward within Chrome. However the second user (also an administrator) cannot use this setting and must instead use the two finger swipe in settings. Both settings are identical but the Chrome browser wont recognize the single finger swipe for the second user. The gesture works fine in Safari, but not Chrome. Any suggestions?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

IPhone 5 wifi works in one room but not the other.

I have an iPhone 5 and the wifi is unreliable. It works in the room with the router but when I walk down the hall it doesn't work. I'm talking 20 feet away. So frustrating because the phone is almost worthless. Why would it connect but only in such close range? No other devices have this problem. Yes, I've turned the wifi on and off. Yes, I've restarted the router. Yes, I've checked the WEP. It just makes no sense that it would work in one room but not the next room. Help!

Hello Gnpco,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/HT1365
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Best of luck,
Mario

Enterprise Mgr works with one db but not the other

Hi
We have two Oracle 10g databases installed. Enterprise Manager works with the second, but not the first. I believe the problem started when we migrated the host server to another network domain. Everything else works fine, but I'm getting a page load failure when attempting to access enterprise mgr.
The second db was installed after the migration and EM works fine.
Can anyone tell me how to reconfigure this?
Thank you

by any change hostname or ip was changed during migration
also can u paste the emoms.trc ?

Ipod works on one computer but not the other?

Can someone please help me? My ipod works on my laptop but not the desktop. When I plug the Ipod into the desktop it sometimes shows up in Itunes but says it's corrupt. Which it obviously isn't because it works fine on it's own when not plugged into a computer and it works fine when I plug it into the laptop. Also when I looked in my computer the Ipod would show up as drive j and it would flash on and off. Well, I tried plugging the Ipod into a different port and that worked as far as drive j stopped flashing on and off. I tried changing the drive name and it wouldn't let me because it always went back to drive j even after I changed it to drive z. Itunes is playing music and is up to date. I have Windows Vista Home Premium 64 bit. Please help.

Well start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Patrick

Sound working on some programs but not others (Pavilion dv6 Notebook PC)

The sound is working for some programs (iTunes) on my laptop, but will not work with Chrome, Internet Explorer or BBC iPlayer Downloads.
I'm at a loss to explain why. When I open up the Sound settings on the laptop, I can see that iTunes output plays on the 'Speakers and Dual Headphones' device, which is what I believe all my sound would usually come out from. I can hear it as usual.
However, when I play audio in Chrome, no sound comes out, but it appears the device 'SPDIF (Digital Out via HP Dock)' is now playing the sound instead. The sound bar for this moves up and down while something is playing, but I cannot hear anything at all.
It is as if my internet programs have been configured to have sound output through a device that does not actually exist. I tried fiddling around with Sound settings and 'Disabled' the SPDIF device, but nothing has actually changed. I would like to hook my internet audio back up to the 'Speakers and Dual Headphones' option but cannot work out how to.
Sorry if this is not very well-explained, but I have never dealt with this problem before.
Thank you so much if you're able to help - this is very frustrating!
Edit: I also recently used a new HDMI cable to hook my laptop up to our TV and think this could be something to do with it

Hi PacificBay,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I saw your post regarding the problems with the sound. Try setting your speakers as the default audio device. What operating system are you using? What is the product number for your Pavilion?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Report Generation working on Dev machine but not on Deployment + Lessons learned

I don't do deployments very often with Teststand. But I have to say, I learned a lot from this one from trial and error and help from the message board. I have got my deployment to final work (almost) with these lessons learned:
1. Create a base installer for the engines and drivers, that way if you need to update it is much smaller.
2. Dont install Teststand before Labview on a new development machine (not related to this deployment but I did learn that)
3. Don't have your Testexec window open, alter the Station Globals, then close the window. It just puts them back to the old version (probably my biggest problem).
4. Paths are extemely important.
I think I have figured it out with much time involved and kept notes of what I have done for future. The ONLY issue I have left is this below. My dev machine works as it should but when I deploy, it does not. FYI- I manually copied over Station Globals, Process model, and Testexec. DO I need something else?
I create serial numbers for my UUT's in the proceses model. It all works fine in development. The serial numbers are generated and the UUT filename is titled [023232232].txt and changes per unit. The path for example lets say is C:\Users\Ryan\Desktop\temp. A logfile is generated for each and put in that folder.
When I deploy, it does something different. Instead of putting the files into the temp folder, it errors out saying it is in use. If I delete the temp folder, it creates a file called "temp" which contains my text logfile. This file just keeps getting overwritten.
Any ideas on this?

Hi SimpleJack,
One way you can ensure that the Report Options you want to have stay with your sequence file is to actually override them using a Sequence File Callback. I have attached a link to a KnowledgeBase article that walks you through how to add the ReportOptions callback to your sequence and programmatically set the options that you would normally set by going to Configure»Report Options from the Sequence Editor.
Also, to ensure that the correct Process Model is being used with your sequence file after distributing, you can set the Process Model within the Sequence File Properties. This can be found by going to Edit»Sequence File Properties, and then going to the Advanced tab. I have attached a screenshot of this window below, as well. From here, you can set the Model Option to Require Specific Model, which especially comes in handy if you are using your own custom Process Models.
I hope this helps, SimpleJack! Have a great day!
How Can I Programmatically Enable or Disable Database Logging or Report Generation?
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support

Why does the flash player work on some website but not others??

I have the new flash player, and for the most part the player will work on some web sites. However I like to be on myspace and it says that I have to install the new version of the flash player. However I ALREADY have the new verison. There are other site that I go to as well and it tells me the same thing. what is going on and how can I fix it. I am at my wits ends right now and I dont know what to do. Can any one help me please

I had the same issue when I had created Flash Paper items. I had found the a solution on my opinion.
http://www.eolsoft.com/freeware/flash_movie_player/
you actually need a Flash Movie Player and not Flash Player. they are different. the only issue is that Adobe does not support this anymore.
so what I did is placed the EXE file of Flash Movie Player found on the link above on my server, made a note to my viewers that Flash Movie Player is required to view the documents.
I found this solutlion when my boss asked why he could not view any of the Flash Paper Documents

Airport extreme working on some devices but not others

All of a sudden airport extreme has stopped working on some of our devices. within our family we have an old macbook pro running tiger, a 2nd gen macbook air running snow leopord, a black macbook running lion, a mac mini running lion, two iphone 4s and an iphone 3g. the wireless only works on the two computers running lion. nobody has changed any of the settings on the airport extreme. it is running the latest version and has been working fine up until a couple of days ago. i have reset the modem and router several times each but nothing has helped. when we try to connect the iphones to the wireless they say unable to join network and the computers running snow leopord or older say there was a problem connecting to the network or something similar to that. any help would be appreciated!

I know that you have reset both the modem and AirPort already, but I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
(OPTIONAL, but recommended) While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

Problems with Home Sharing - works with some users but not all

Hi all,
On our Mac we have 3 different user accounts. Among the three, home sharing seems to work for two of them, but not three. For example, if I'm logged into User A's account, I'm able to access the library for users B & C. However, B & C are able to see user A's library, but items do not play or transfer. B & C can use each other's shared libraries without a problem.
Previously, all three users could use the other's libraries. I've done the obvious: restarted the computer, made sure sharing was turned on on all 3 accounts and synced the Apple ID and password on all three iTunes so that they're runing on the same Apple ID account.
The error I get when trying to transfer songs from A to either B or C is: "There was a problem downloading "[song name]". The URL "" could not be found on the server."
We're using iTunes 9.0.2.
Thanks all in advance

click here to learn "how to share music between different accounts on a single computer" and this read about iTunes 9: Understanding Home Sharing
any help ?
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

JavaMail applet working on local machine - but NOT on my webpage

Hi.
My code works on my machine as an applet run through my Eclipse IDE.
I have the Applet deployed on my website, which is the same server as the email server itself.
public void postMail(String to, String subject,
                            String message , String from) throws MessagingException
    boolean debug = false;
     //Set the host smtp address
     Properties props = new Properties();
     props.put("mail.smtp.host", "mail.completemusician.net");
     props.put("mail.smtp.port", "2626");
     props.put("mail.smtp.auth", "true");
    Authenticator auth = new SMTPAuthenticator();
    Session session = Session.getDefaultInstance(props, auth);
    session.setDebug(debug);
    // create a message
    Message msg = new MimeMessage(session);
    // set the from and to address
    InternetAddress addressFrom = new InternetAddress(from);
    msg.setFrom(addressFrom);
    InternetAddress addressTo = new InternetAddress(to);
    msg.setRecipient(Message.RecipientType.TO, addressTo);
    // Setting the Subject and Content Type
    msg.setSubject(subject);
    msg.setContent(message, "text/plain");
    Transport.send(msg);
}1) I know my code works on my local machine - so it's not related to a code bug.
2) I know that all class files are uploaded correctly and working in a single JAR file. The other 3 classes I use work fine in this applet.
3) I receive no errors of any kind - it just appears that my constructor may not be called, or the instant java mail API is mentioned, the applet just refuses to work.
v.setMessage("Attempting to send..");This line never is used in my class constructor - which is troubling.
public SendMailUsingAuthentication(String from, String to, String subject,
          String text, ValidationDialog vd) {
       v = vd;
       v.setMessage("Attempting to send..");
       boolean succeed = true;
       try {
          postMail(to, subject, text, from);
     } catch (Exception e) {
          // TODO Auto-generated catch block
          v.setMessage("Email delivery has failed. " +
                     "Please check your email address provided and try again." +
                     "\n\n" + e.getMessage());
          e.printStackTrace();
          succeed = false;
     if(succeed)
           v.setMessage("Your request has been submitted successfully.\n\n" +
                     "You may safely navigate away from this page.");
           v.setBlue();
     // TODO Auto-generated constructor stub
}Feel free to reply - I would appreciate your help. Just keep in mind:
1) Don't tell me to use javascript. I refuse.
2) Don't tell me I need a server application. It's supposed to work according to documentation, without it.

Is your applet signed properly? Note that you have to sign all the jars for the applet -- including the JavaMail jar and the activation jar -- using the same signer.

Font works in one Document but not the other

OK so we have been having trouble with this one font for a while now. For some strange reason it will download onto my bosses computer but it won't load onto mine. I have had some help to try to download it on my computer, which we thought was successful. We have one document that will open in InDesign correctly with out me needing to change the font so it will work. But I tried to create a new document with it today but it can't find it. I have tried to making paragraph styles for each one and then adding them to the library I use, but that did not work.
I am running a Mac with OS 10.8.3 and I am using CS6. Also this font file kept telling me there was serious problems with them when I try to install them into Font Book.

InDesign has a feature called Document Installed Fonts which allows a file to use fonts not installed on your system if they are contained in a folder named Document Fonts appearing in the same folder as the .indd file. That might explain why you can open an older file, but not use the font in a new file.
What is the name, and type, of the font?

Smart form PRINT PREVIEW working on one box but not on other box

Hi Guys,
I have one program which works on DV1 box but is not working on DV2 box. It is NOT giving short dump. In this program there is PRINT PREVIEW button. This print preview button is work in DV1 but not in DV2. DV1 & DV2 are ECC 6 and we installed SAP service pack.
I will really appreciate if somebody can give me some direction.
Thanks,
mini

Program is save in both the boxes. DV2 has SAP service pack, but DV1 not. I think this problem is related to FONTS not being supported by service pack.
How can I fix this?
Thanks,
mini

XMLDocument.Validate works on some machines but not on others

Similar Messages

Maybe you are looking for