XMLResourceRenderer error after install CRM-Business Package

Hi together,
I've installed the Business Package Business Package for SAP CRM 4.0 60.2.3 (BPCRM40602_3-10002661.ZIP). Now I have a error at the first page where the new are displayed: "Resource cannot be displayed with XMLResourceRenderer" for every news which I have.
Have anybody a idea what is the reason for this error and how I can solve it?
Regards Thomas

Hi Thomas,
did you restart your server after installing the Business Package?
The error message the a known problem and occurs after hot deployment of Portal components.
Regards, Roland
PS: The Problems will be fixed with NW04 SPS14

Similar Messages

Error while deploying CRM Business Package.

Hi all,
We have imported one CRM business package. We are getting the following errors in the log file.
WARNING: IView was not migrated successfully due to the following reason: com.sapportals.portal.contentmigration.iview.ExportedIViewException: The PAR file: com.sapportals.km.par containing profile: 'navigation' was not deployed prior to IVU handling, no template iView can be created ,path searched : par:/applications/com.sapportals.km/components/navigation
SEVERE: Object was not migrated: Import of iView: com.sap.pct.crm.infocenter.news.AuthorPartnerCompany Failed !
Where is the com.sapportals.km.par file located?
Any suggestions?

Hi Gauri,
Go thru following notes :
660777-Extensions for KM in CRM4.0 do not work in BP60.1 and BP60.2
640634-KM compatibility package
With Regards,
Amol

Configuring CRM business Package - 4.0 60.2.3 and ISA on EP6SP11

Hi all,
We have installed CRM business Package - 4.0 60.2.3 on EP6 SP11. For which we have created SAP_CRM system, filled in the all required parameters like application host, gateway service, client no, user authentication type etc.( Not ISA related parameters).
Now some of the iViews throws "GenericISAComponent" error. I suppose its because we haven't configure ISA system for the same.
Can anybody help me in how to configure ISA System for CRM business package. Do i have to create new system or i have to fill in ISA parameters of SAP_CRM system.
Thanks and regards,
Prath.

Hello James,
Thanks for the prompt reply...
But my question is whether I have to make these changes in SAP_CRM system itself or should i create new system namely ISA_B2B,SHOP_ADMIN,ISA_B2R etc.
With regards,
Amol.
Note : If you have already configured the CRM business package, please send me the documentation or the screen-shots of the system defined in portal on my e-mail id([email protected])

Problem with CRM business package- Customer iViews throws runtime error

Hi all,
We have installed EP6.0 SP11 Patch3 on windows machine.
Also we have uploaded CRM business package with all required systems (e.g. SAP_CRM,SAP_BW etc.)
All the iviews are working fine except which are under Customer and Customer Admin Role. These iViews throws following exception :
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.portal.migrated/ep_5.0/roles/com.sap.pct.crm.Customer/customer/Home/com.sap.pct.crm.channelmgmt.specialoffers
Component Name : com.sap.pct.crm.ChannelMgmtComponents.GenericISAComponent
Has anybody face this problem earlier....???? If so plz help.....
With regards,
Amol.

hi,
i didnt configure customer and customer administrator roles...however i was dealign with other roels of CRM business package.. I can jsut give you a asuggestion ..i.e. i see that there is a property cateogry "ISA" after you create the system..so i think these properties need to be filled up.
Thanks

Portal Runtime Error - CRM Business Package

Hi,
I've have installed Business Package for SAP CRM 4.0 60.2.3 onto my Netweaver Portal. My Netweaver Portal version is EP7.0 SP10. My SAP CRM version is CRM 5.0. I've also done the connectivity test for both Connector and Web AS. Both connection results are successful.
However, when I go to Portal to see the CRM iViews, it gives me an error as follow (this is one of them):
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.portal.migrated/ep_5.0/roles/com.sap.pct.crm.container.SapCRM40.All/PartnerMngrCC/SrvCtr/Service/com.sap.pct.crm.channelmgmt.service
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
I look into the log file, it says:
User PIAFUSER, IP address
HTTP request processing failed. HTTP error [403] will be returned. The error is [You are not authorized to view the requested resource.No details available].
If given SAP_ALL profile to PIAFUSER.
Appreciate any help on this.
Rgds,
Hapizorr Rozi Alias

Hiya,
first off, if your backend is CRM 5.0 you should use the BP for CRM 5.0 instead of the 4.0 one.
As you know, in SAP NetWeaver 2004s, the portal is installed as a usage type via SAPINST. Now for installing the Business Package for CRM 5.0 there's a SAP note because the installation process also goes via SAPINST.
Check out SAP Note 883948. The following sections should be particularly helpful:
Section PREPARATION -> Components of BP CRM (UT Code: BP-CRM)
Section INSTALLATION, esp. info on JSPM
Best regards
Dagmar.

CRM Business Package - Error while working with Iview

Hi,
I would like to know if any one had a chance to work with CRM Competitor Products Iview. I am using BUSINESS PACKAGE FOR SAP CRM 4.0_60_2_2. There is no problem is displaying the Iview, also I am able to work with the Iview, but when I try to open tabs, I am getting a fatal error. A run time error occurs and the iview doesn't work after that.
the exact message is :
A run time error occured, Do you wish to Debug ?
Line 22
Error : Invalid syntax.
Since this is a standard package I don't know what this error means.
Help is greatly appreciated.
Thanks!
-SG

Hi Suresh,
Similar Problem we faced for other IViews like Products, Accounts BSP Application from the SAME Business Package.
Later we found that the error is not in Business Package, but the Version of IE Browser caused the Problem.
Just for info we need to have the IE 5.5 or Greater (IE 6.0 is Best) After Upgrading the IE Version to 6.0, then we did not face this error.
Hope its helpful.
Regards
Sumanth

CRM Business Package Error

Hi Gurus!
I have a EP6 SP10 installed and configured with ESS and MSS business packages, accessing a SAP R/3 4.7 system. Everthing is running ok!
Now we decided to install the CRM business package into this EP. I did the same steps that I had done for ESS and MSS packages, but CRM iviews are still not work.
- The business package importing was ok!
- The communication test with the backend system (SAP CRM 4.0) was ok!
- The user/roles are configured in EP!
But no iviews work.
Is there any other necessary step to be made?
The error message from the log files is:
#1.5#001143594D25003D00000140000064D40003FF8F0523947D#1125414661756#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#DEINF.ADRIAN#11820####46e2c1d0196811da80d3001143594d25#SAPEngine_Application_Thread[impl:3]_9##0#0#Error#1#/System/Server#Java###Exception ID:12:11_30/08/05_0027_2164550
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/bc.Bacen/bc.Funcoes/bc.regraCRM/com.sap.pct.crm.container.SapCRM40.All/Customer/customer/Home/com.sap.pct.crm.channelmgmt.specialoffers
Component class : com.sap.pct.crm.channelmgmt.GenericISAComponent
User : DEINF.ADRIAN
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:545)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:153)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:824)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: java.lang.NullPointerException
at com.sap.pct.crm.channelmgmt.framework.HttpCommunication.setCookie(HttpCommunication.java:235)
at com.sap.pct.crm.channelmgmt.framework.HttpCommunication.forceSessionID(HttpCommunication.java:128)
at com.sap.pct.crm.channelmgmt.framework.WebInitialCommunications.getSessionID(WebInitialCommunications.java:51)
at com.sap.pct.crm.channelmgmt.framework.SessionManager.checkInternalWebSession(SessionManager.java:68)
at com.sap.pct.crm.channelmgmt.framework.SessionManager.checkWebSession(SessionManager.java:30)
at com.sap.pct.crm.channelmgmt.framework.ExternalWebComponents.InitContent(ExternalWebComponents.java:63)
at com.sap.pct.crm.channelmgmt.framework.ExternalWebComponents.doContent(ExternalWebComponents.java:44)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
... 29 more
Best regards,
Adriano

Hi Adriano,
Take a look at following forum post by me.
Re: Business packcage for CRM 60.2.3 marketing calendar iview,
regards,
prakash
PS: Please reward points for helpful answer or problem resolved.

CRM Business Package 5.0 Deployement Error

Hi All,
I downloaded CRM business package 5.0 contains to SCA files first one i deployed success fully but the second i am getting following error.
Aug 15, 2007 1:21:23 AM Error: Target system of development component 'com.sap.pct.crm.dam.container.etc'/'sap.com'/'SAP AG'/'5.0.0.20060531153502.0000'/'0' reported the following error:
com.sap.sdm.apiint.serverext.servertype.deployment.DeploymentActionException: The substitution of deployment parameter variables failed.
The following variables could not be substituted because they
are not known by the SDM-Repository:
com.sap.cm.share
To fix this problem go to the SDM-Repository-View of the SDM GUI
and define substitution values for these variables or correct the
type information.
How to rectify this error?
Yhnaks and Regards,
Phanikumar.

Solution :
Goto SDM GUI & then in SDM Repository add deployment parameter variable
"Com.sap.cm.share" with
Value = :\usr\sap\J2E\SYS\global\config\cm

CRM Business Package 5.0.0 SP1 in Netweaver Portal 7.3?

Hi,
at the moment we have a Netweaver Portal 7.0 with CRM Business Package 5.0.0 SP1.
We are planning to upgrade our Portal to Version 7.3 but are not able to upgrade CRM to 7.0 at the moment, so we have to stay a while at Version 5.0.
Could anybody tell me if it is possible to use our current Business Package also in 7.3?
As i see there are no further SPs for this Business Package, so i only can use the one i already have!?
Many thanks for your answers
Regards
Alex

Hello,
We are also facing same issue : Installing BP CRM 5.0 with EP 7.31.
Error we have :
Content pass of Application integrator failed 'com.sap.portal.appintegrator.sap.BSP'
Unable to parse template '<PSID.CRMUnique>'
Hereafter you will find summarised what we tried (without success) :
Add role CRM Default service
Upload component com_sap_pct_crm_core_services.par (see oss note 1175462, 1291058)
We raised an OSS Note asking for BP CRM 5.0 compatibility with EP 7.31. SAP answer is : no compatibility.
We do not understand why and are looking for a document where it is clearly indicated.
Rgds
Gilles

Page cannot be displayed in CRM Business Package

Hi,
I have installed SAP-CRM Business Package. While testing with ServiceRep role, navigating to Service & Support -> In-House Repair Orders, I get a "The page cannot be displayed" error in internet explorer.
Can anyone help?
Thanks.

Hello,
I think you should post this question in the <a href="https://forums.sdn.sap.com/forum.jspa?forumID=126&start=0">CRM Development Forum.</a>.
Regards
Gregor

Permission issues with CRM Business packages

Hello
I have imported CRM business packages 5.0 to EP7 Portal.
created System object SAP_CRM.connection is fine.
Assigned predefined CRM roles(Content provided by SAP)to new users.but when I click on the CRM iview,
getting following error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/specialist/com.sap.pct.crm/com.sap.pct.crm.roles/com.sap.pct.crm.accountmanager/com.sap.pct.crm.am.acc.accountmgmt/com.sap.pct.crm.am.acc.accounts/com.sap.pct.crm.acc.accounts_s
Component Name : com.sap.portal.appintegrator.sap.BSP
Exception in SAP Application Integrator occured: Cannot retrieve system object for this alias. System Alias: 'SAP_CRM', System ID: 'pcd:portal_content/com.icicipru.systems.SFA_Systems/com.icicipru.systems.SAP_CRM'. User: 'crm_user', Reason: Access denied (Object(s): portal_content/com.icicipru.systems.SFA_Systems/com.icicipru.systems.SAP_CRM).
Exception id: 06:14_10/05/07_0071_303671250
See the details for the exception ID in the log file
but when I add Super admin role to the users.it works fine.
I have addeed end user permission to EVERYONE group and theser CRM users are part of the group.Everyone group is also part of Portal Content folder and System Folder.
please help.
regards
John

Hello John,
It seems to be a permission issue. Just open the permission editor of the system and assign the everyone group to it. Select the checkbox corresponding to end-user. save it.
It will solve ur problem.
Regards
Deb
[Reward Points for helpful answers]

CRM business packages

Hi Alle,
Is it some SAP CRM business packages for portal to kommunicate with CRM function modul? As we have for HA (ESS)...
Thanks

I install new installation

Relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express)

Hi,
I am facing a lot of relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express Edition).
I had followed Oracle E-Business Suite R12 Installation Steps on Windows XP (Oracle E-Business Suite R12 Installation Steps on Windows XP and for VS2008 have followed metalink note MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows [ID 1070674.1]
After applying the patch from section 1 9491976, there are a lot of relinking issues as follows:
=========================
Relinking module 'ADCONV.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/ADCONV.exe
Starting link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
Relink of module "ADCONV.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'AFTBLGEN.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/AFTBLGEN.exe
Starting link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
Relink of module "AFTBLGEN.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'APPR60UE.dll' in product fnd ...
Removing any existing temp directory
rm -rf temp
creating the temp directory
mkdir temp
changing permissions for the temp directory
chmod 777 temp
Getting the object file names for this APPR60UE.dll
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
appr60ue.LIST
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Unable to get the objects for module "APPR60UE.dll".
See error messages above (also recorded in log file)
for possible reasons for the failure.
adrelink is exiting with status 1
=========================================
Has anyone faced something similar in the past?
Regards,
Neeraj

Hi Helios,
That got resolved after I added the location of the dll in the PATH.
Now i m getting LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
The log looks like:
Relinking module 'fndcpesr.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
Starting link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2908:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:759:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2955:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:1340:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
link.exe
-MAP:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.map
-NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
-OUT:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/fdpesr.obj \
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oranls10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
LINK : warning LNK4044: unrecognized option '/LIB/MSVCRT.LIB'; ignored
LINK : warning LNK4044: unrecognized option '/LIB/OLDNAMES.LIB'; ignored
LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
gnumake: ***
[D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe] Error 157
Done with link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
Relink of module "fndcpesr.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Regards,
Neeraj

Why no SMF manifest instance after installing the apache2 packages?

Hi,
After installing the apache2 packages:
# pkgadd -G -d . SUNWapch2r SUNWapch2u SUNWapch2d
then type:
# svcs -a | grep apache2
the output is:
svcs: Pattern 'apache2' doesn't match any instances
STATE STIME FMRI
How do I solve it?
Thanks,
Terence

I am seeing the same problem. After installing the apache2 pkgs ...
svcs -l apache2
fmri svc:/network/http:apache2
name Apache 2 HTTP server
enabled true
state maintenance
next_state none
state_time Tue Apr 28 15:41:45 2009
logfile /var/svc/log/network-http:apache2.log
restarter svc:/system/svc/restarter:default
contract_id
dependency require_all/error svc:/milestone/network:default (online)
dependency require_all/none svc:/system/filesystem/local:default (online)
dependency optional_all/error svc:/system/filesystem/autofs:default (online)
bash-3.00# tail -10 /var/svc/log/network-http:apache2.log
[ Apr 28 14:50:32 Executing start method ("/lib/svc/method/http-apache2 start") ]
[ Apr 28 14:50:32 Method "start" exited with status 96 ]
[ Apr 28 15:24:42 Leaving maintenance because disable requested. ]
[ Apr 28 15:24:42 Disabled. ]
[ Apr 28 15:28:06 Executing start method ("/lib/svc/method/http-apache2 start") ]
[ Apr 28 15:28:06 Method "start" exited with status 96 ]
[ Apr 28 15:38:22 Leaving maintenance because disable requested. ]
[ Apr 28 15:38:23 Disabled. ]
[ Apr 28 15:41:45 Executing start method ("/lib/svc/method/http-apache2 start") ]
[ Apr 28 15:41:45 Method "start" exited with status 96 ]
bash-3.00# svcs -x apache2
svc:/network/http:apache2 (Apache 2 HTTP server)
State: maintenance since Tue Apr 28 15:41:45 2009
Reason: Start method exited with $SMF_EXIT_ERR_CONFIG.
See: http://sun.com/msg/SMF-8000-KS
See: httpd(8)
See: /var/svc/log/network-http:apache2.log
Impact: This service is not running.
I have yet to find Status [96]

Configuring CRM Business Package

Hi there,
I am new to EP. Anyway I am currently trying to install a CRM Business Package 4.0 60.2 onto our EP. I think I have successfully imported the business package. I am now configuring it using the guidelines in saphelp.
I am working on the section: 'Syatem Mapping Service'. I am not sure what this section is required. I tried following the steps to 'Enable the System Mapping Service' however on step 4 I cannot locate the 'com.sap.pct.crm.core.services' folder in the 'Service Configuration' section of the portal. Does this mean I ahve not installed the business package properly?
I did a search in the EP server and found a smilar file in the folder: EPFolder\j2ee\j2ee_no\temp\transport\import\EPT and the file is named 'com.sap.pct.crm.core.services.par.ept'. Does this mean anything to anyone?
Any help or advice would be much appreciated.
Many thanks
JoJo

Hi Jo Jo
Which document you are using to follow the steps?
Can you send the lisk for the document
Thanks
Vj

XMLResourceRenderer error after install CRM-Business Package

Similar Messages

Maybe you are looking for