Xmod adapter : where to bu

Hi,
I'm thinking about buying the xmod but only i have the adapter for it to connect it to my vision m?) Where can i buy this ?2) Should it be a creative adapter or will others work to ? Wich others ?3) I've heard when you connect it to a pc you need windows xp with service pack 2 on it, it this true ?thanks?

Hi ,
Go to particular message in SXI_MONITOR. In Message there will be window on left hand side. There will be Technical Routing.
Technical Routing> Payloads->Maindocument. This shows the Output data.
If you are not able to see Technical Routing inform you basis team they need to do some configuration in SXMB_ADM
Edited by: Rajhans Abhay on Feb 18, 2010 4:29 PM

Similar Messages

Error in reciever file adapter , where i am getting file name dynamically

hi all,
error in reciever file adapter , where i am getting file name dynamically, please help me in this isssue , i am trying for a long time
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)'

i am getting new error
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
this is my strcuture
and i have changed my structure
<HEADER>
<ADDRESS1/>
<ADDRESS2/>
<ADDRESS3/>
<ADDRESS4/>
</HEADER>
<HEADER_GST>
<TAX1/>
<TAX2/>
<TAX3/>
</HEADER_GST>
<LINE>
<QTY/>
<UOM/>
<UNIT_AMT/>
<CHARGE_TO_DT/>
</LINE>
<FILENAME>
<FILENAME/>
</FILENAME>
i have given the recordset structure as
HEADER,HEADER_GST,LINE,FILE

SeeBurger Receiver VAN/FTP Adapter: where to mention the target path

Hi,
I am using SeeBurger VAN/FTP adapter for IDOC-XI-EDI scenario.
In seeburger receiver VAN/FTP adapter, where I have to set the target path. My target path is very long (15 characters).
I am able to configure Host, Port, User id and password.
Please suggest where to put the path name in seeburger receiver VAN/FTP adapter.
Thanks,
Madan Agrawal

HI Madan,
Can you please tell me which VAN provider you are meant to use? It is the same question which Prateek asked above 'which protocol' without this it is hard to help dude.
I just checked and half of them don't want you to use this field 'host path;
Also the error is different ...
1) Are you doing FTP or FTPS?
2) which VAN/Protocol
regards,

2006 G5 display adapter where to buy?

anybody out there know where I can get/buy a display adapter for a late-2006 Intel powered iMac G5? Want to hook up my computer to my new HDTV but no HDMI ports on G5.

I have an IGO which I purchased a couple of years ago when the one that came with my powerbook burned up. I would recommend it and you can buy it on line. Much more substantial than the one that came with the powerbook. Try igo.com

RFC Adapter - Where to Register Rfc2XmbService (Sender System or XI ?)

Experts,
I have the following scenario:
R3 --> RFC_ADAPTER --> XI --> SOAP --> THIRD_PARTY
My specific question is, In which system do I need to register the Rfc2XmbService program. Is this done in the R3 system or in the XI system.
If it is done in the R3 system then where is it done cause there is no J2EE administration tool in R3.
Could someone explain exactly what this registration concept is.
Thanks and appreciate any help in advance.
- Ravi
--- I have figured this one out already. The program needs to be registered in XI and Not the sender system.
Thanks
Message was edited by: ravi kumar

Hello,
the Rfc2XmbService registers itself when you activate the RFC adapter in the Configuration but you can preallocate it through the Visual Admin.
Further by default are logging for sync calls not enabled, e.g. you don't see anything in SXMB_MONI.
Therefore go to SXMB_ADM and the Integration Configuration option and under the RUNTIME specific option create an entry for
RUNTIME LOGGING_SYNC 1 (0 is default).
Also make sure that the rfc adapter is activate in the AdapterFramework overview. On the target system call transaction SMGW and go to logged on clients to see if you see the Rfc2Xmb Service. Then in SM59 of the R/3 system you should have an entry pointing to the Rfc2Xmb service and a test should give you an idea if it works.
I'm doing R/3 4.6c -> XI 3.0 -> R/3 Enterprise about 20 BAPIs, no issue.
I hope this helps.
Stefan

FTP Adapter where FTP server is SSH Tectia Server for IBM z/OS

We are purchasing "SSH Tectia Server for IBM z/OS" as the secure FTP server.
1. Has anyone used this with Oracle FTP Adapter to securely FTP files to the mainframe?
2. What is the best way to maintain the username and password in the oc4j-ra.xml of the FTP adapter?
3. Can this user and password be encrypted?
Thanks

HI,
Unfortunately there are some concerns with FTPS connectivity with XI.
As you know SFTP is not yet possible with XI, but somehow you could use FTPS.
Please confirm below things this may help you
1. Please make sure to Activate Secure Storage in the File System after Deploying the SAP Java Cryptographic Toolkit. Check below thread for the detail procedure
http://help.sap.com/saphelp_nw04/helpdata/en/cd/14c93ec2f7df6ae10000000a114084/content.htm
2. You can go for Third Part adapters such as Seeburger adapter AS2, OFTPS etc. for better connectivity with FTPS
refer
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
3. Search the options of your client's software to find where its public and private keys are stored, these are 2 files present on the FTP server, then put the Public key of the XI server on the Client FTP Server and likewise for the Public Key of the FTP Server on the XI Server.
This enables the SSL handshake, i.e. Exchange of certificates.
Thanks
Swarup

HTTP adapter: where to see the transformed output message

All,
I am a beginner in Webservices/HTTP interfaces in PI. I have to make changes on an existing custom interface which uses HTTP adapter. I have done the changes in the message mapping and tested it using the test tool. It seems OK.
However when we do end-to-end testing, data is flowing but bussiness needs a copy of the transformed data that has been sent out from PI.
I checked RWB->Message Monitoring-> Integration server(Database) and it showed the successful message. When I drilled further into this message, it showed the SOAP message (Version 0 and Version 1 with payload). The payload showed the data that ECC had sent to PI and not the transformed data that went out from PI to 3rd party via HTTP adapter.
Appreciate if you could guide me in right direction regarding where to see the Output/Transformed data that is actually sent to third parties.
I have checked SXI_MONITOR as well in PI but that also shows the payload only and not the transformed data.
Regards
SK
Edited by: Shirin K on Feb 18, 2010 3:10 PM

Hi ,
Go to particular message in SXI_MONITOR. In Message there will be window on left hand side. There will be Technical Routing.
Technical Routing> Payloads->Maindocument. This shows the Output data.
If you are not able to see Technical Routing inform you basis team they need to do some configuration in SXMB_ADM
Edited by: Rajhans Abhay on Feb 18, 2010 4:29 PM

JMS adapter : Where is JNDI user administered ?

Hi all, we are testing a JMS adapter in a PI7.1 (no eHp).
The JMS adapter needs a JNDI user and
password for JNDI lookups by remote clients.
I'm puzzled about the administration of this JNDI user.
My question :
can this user-ID be just any userID in the system ?
or is it a user ID that is indicated in the Visual Admin ? if so, where ?
if it can be any user, what rights does it need for a JNDI lookup ?
Or (shudder...) should I really start editing XML property files ??
Regards,
Ronald van Aalst
TNT Post

Hello,
You can see the explanation per sap note below:
#856346 - J2EE JMS Adapter: Frequently Asked Questions (FAQ)
2.6) I am connecting to a JMS provider using JNDI mode. How do I add pass an extra name,value property pair while setting up the JNDI initial context?
Answer: Assuming that your property value is a string, please add the following name, value pair in "JMS Additional properties" table of your channel configuration:
JNDI.InitialContext.property.X=java.lang.String propertyName,
java.lang.String propertyValue
where X is a number, the LHS part needs to be put in the name column and the RHS part in the value column of the table respectively.
BR,
Franklin

Need Power Adapter - where to buy?

Hi folks,
My trusty 12" Powerbook's power adapter is slowly falling apart.
Is it possible to purchase official ones still? I can't find any on the website, and i don't want to risk getting one from Amazon / eBay due to random third-party ones that may not work.
I need a UK plug too, hopefully they aren't a fortune??

I have an IGO which I purchased a couple of years ago when the one that came with my powerbook burned up. I would recommend it and you can buy it on line. Much more substantial than the one that came with the powerbook. Try igo.com

"mini DIN" to Standard Adapter - where did they g

Is there any way someone can get one of these adapters? Or is there another option for connecting standard MIDI cables to the (first) Soundblaster Audigy card? My card only came with one adapter and I need another one. Is it possible to get one in the USA?Message Edited by damagd on 04-7-200703:48 AM

Thanks for the link Joeywhat, but as I said in my original post, I li've in the US. I know that the cable is available from Dolphon Music, but this shipping charge to the US would be ?40, which would make the total cost nearly US$00.
Jupata, I know the cable is available in a couple of E-MU cable "bundles", but again, these are apparently not available for sale in the US.

MSI VOX TV Tuner USB 2.0 - POWER ADAPTER WHERE TO BUY!

I purchased a generic power adapter from radioshak.
it works perfect to power the msivox box.
It has selectable volts on it. 3, 4.5, 6, 7.5, 9, and 12
2A
I have it set to 4.5 volts, as 6 is to much and 3 is not enough.
you might be able to find something with more options on it.
The beauty with this thing is that you can purchase ANY
end you want, and it just happens that radioshak
also carries an end that fits the MSI vox.
The end is classified as "A" size.
When you plug the end into the power adapter,
make sure that you align the word TIP (on the p.a. cord) with the (-)negative side of the size "A" end you bought
The cost was around $1.50 for the end
and $20 for the adapter, however, I had it before I bought the msivox. lucky me!
There is a slight humming noise if I push the size A end to far into the msivox, I assume this creates
some sort of interference, so to eleviate the noise, I just slowly remove the end until the noise stops,
but before the unit loses power from loss of contact.
hope this helps.
-cope

A generic adapter should work just fine although you may need to install drivers for it.
Incidentally the new 2nd gen X1 Carbon uses a proprietary connector, not USB. You can buy a replacement for it from Lenovo or less expensively by googling on the FRU number and buying from an independent seller. The advantage of using the proprietary adapter rather than a generic USB adapter is that it saves the USB ports for other uses.
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

I have an Apple OSX 10.5.8 with 2Ghz powerPC G5, which doesn't accept the standarsversion of firefox 6, but someone made an adaptation, where do I find it?

I just need the name of the website, I know it exists, but I forgot the name.

You may be looking for TenFourFox.com ... which at the moment is offline due to some sort of outage.
I believe I have seen other projects, but that is one I tried a few releases ago. Sadly keeping the old (but still very functional) PPC machines running feels like walking down a swinging-rope bridge as someone is cutting the ropes one at a time.... I recently told a user we must budget to replace her Mac, even though it works fine for her, because its OS won't work at all with her new iPad. (Crafty devils, those Apple engineers!)

Apple DVI to Video Adapter

Hello all,
I recently purchased this Samsung TV which I would like to hook up to my computer to watch videos. Here are the TV complete specs:
http://www.samsung.com/us/consumer/detail/spec.do?group=televisions&type=televis ions&subtype=lcdtv&model_cd=LNT3253HX/XAA&fullspec=F
As you can see I have the following inputs on the TV:
Input & Output(Side)
HDMI 1
composite (AV) 1
S-Video 1
Headphone 1
Input & Output(Back)
HDMI 2
composite (AV) 1
S-Video 1
PC input (D-sub) 1
Component(Y/Pb/Pr) 2
As instructed by one of the guys at the Apple store, I got today an Apple DVI to Video Adapter, and I have a RCA Audio Cable Adapter (that I used in my previous laptop, an iBook). I also have another cable that I don't know the name but it fits in the hole of the adapter where there is a TV-display icon. I used all of these but have no computer image on the TV...
What am I doing wrong? Do I need a "S-Video" cable? Where should I plug the cables on the TV?
I hope someone can help me!
Thanks!

Hey Rhyd, thank you for your reply!
Here is a complete list of audio and video features. I guess there are some audio features in the Input & Output (side and back) lists too. Do you think I have this optical audio input? - perhaps the "composite (AV)"? :
AUDIO
Sound Effect System SRS TruSurround XT
Sound Output(RMS) 10W x 2
Input & Output(Side)
HDMI 1
composite (AV) 1
S-Video 1
Headphone 1
Input & Output(Back)
HDMI 2
composite (AV) 1
S-Video 1
PC input (D-sub) 1
Component(Y/Pb/Pr) 2
I usually use a Bose system with a subwoofer and two tiny speakers I have when I watch movies. I connect it to the headphone output of the TV. How would it work with this? This is the system:
http://www.bose.com/controller?event=viewproduct_page_event&product=companion3_computerindex
Thanks again!
Message was edited by: geegeet
Message was edited by: geegeet

File to SOAP,error in sender file adapter

Hi,
I am doing a scenario FILE to SOAP where In file adapter I am using Quality od service as Exactly once in order.I am getting the below error.It works fine when I use QOS=Exactly once.Not sure why,can you guys please help me.Can we really use QOS-EOIO for sender file adapter,where exacly do we use it.
Thanks
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Edited by: guest xi on Apr 16, 2008 11:55 AM

Hi,
Thanks for your replies guys.I diid give the queue name ,I dont know what is causing the error.Now even QOS=EO which was working fine before is throwing an error.I am using the same file name for both
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Magsafe adapter issue

I purchased a non apple 60 watt magsafe adapter after my 2 year old macbook pro was having issues, I replaced the battery with a apple battery and the non charging issue continued, I would have to wiggle or place a phone on adapter where it magnetically attaches to laptop to get it to charge. The light goes on and off at will, and in order to chjarge it I have to play with it. The second adapter I bought worked great for 67 cycels and is now doing the same thing.. IS it the adapter or something more sinister? I tried to inform apple of the issue a few years ago and did not get anywhere. Any advice?
Thanks

These kinds of problems lend themselves really well to analysis at the genius Bar, if you can get to one. The guys there put their hands on Macs all day every day, and the physical stuff is what they know best.
Your appointment at the genius Bar is free, in warranty or out.

Xmod adapter : where to bu

Similar Messages

Maybe you are looking for