Xmod problem with guitar hero control

I'm having problems with my xmod sound card and guitar hero controller. As soon as I plug in the controller to my usb port, the sound on my computer becomes distorted and theres a lot of static. Even if I unplug my controller the sound continues to be distorted until I restart my computer. My best guess is that it might be some sort of usb conflict. Any ideas whats causing this?

I have the same problem and I just want to know if u find a how to fix it... If yeah, plz, tell me how.

Similar Messages

X-FI Xtreme Audio (OEM) problems with Guitar Po

Hey all, I just upgraded from a SB Li've 5. Sound card to an X-FI Xtreme Audio Card and am now having problems with guitar port. There seems to be a delay or lag time from playing to actually hearing the sound. It sounds like its about half a second or so which makes it really annoying for trying to play. Is there a remedy for this or is there something wrong with the card/drivers?Also, is Line in and Mic levels no longer in the windows volume?playback control?

jutapa wrote:
frubsen wrote:
Hey all, I just upgraded from a SB Li've 5. Sound card to an X-FI Xtreme Audio Card and am now having problems with guitar port. There seems to be a delay or lag time from playing to actually hearing the sound. It sounds like its about half a second or so which makes it really annoying for trying to play. Is there a remedy for this or is there something wrong with the card/drivers?Also, is Line in and Mic levels no longer in the windows volume playback control?
You should be able to control I/Os through Windows mixer(s) and Creative Control Panel (comes with the driver package). If you like to install those software intend for X-Fi you need to download the CD image from BadBoys site (if he still has the site up an running). You get those mixers showing up either through panel which pops up when you enter mmsys.cpl in start->run... prompt (Audio tab, Volume buttons). Individual mixer panels can be called with commands sndvol32 (play) and sndvol32 /r (recording). The lag you have there is normally called as latency. You get rid of it by using ASIO driver mode with 2 - 0ms latency settings. You can set the latency through ASIO controlpanel. If the guitarport has an ASIO driver it's own, use it's control panel or try with asio4all driver (http://www.asio4all.com).jutapaMessage Edited by jutapa on 0-9-20080:0 PM
Is this a standalone driver? Or is it something used in addition to an existing sound driver? I'm having a similar problem with my mic, there is a delay (and it has to be turned up really loud to be heard, although that may be a different problem) and I'm looking for a solution.

Problem with a table control

Hi gurus,
I´ve a problem with a table control. It has 3 columns which one is a checkbox.
I can fill all fields but in the moment I mark the checkbox this line must be unwritable. How can I do it?
Thanks for all
Dani

Assign a function code to the checkbox column....
so when u check / uncheck any entry, PAI + PBO will be triggered....
In the PBO during the loop of table control, check the checkbox field value. if it is 'X', make the row readonly
by looping at screen and setting screen-input = 0 for rest of the columns.
like ...
LOOP AT tc_itab
       WITH CONTROL tc_test
       CURSOR tc_test-current_line.
   module set_row_readonly. " loop at screen and set input = '0' if checkbox is checked...
ENDLOOP.

Problem with Guitar Rig 4 in GarageBand

Hello everyone, I've got a problem with Guitar Rig 4 in GarageBand (I've got a brand new MBP 2011 received last week, so I've got Lion), when I click on "scan" to import presets, only 5 presets appear : "flicker" "overdriven" "pure rammfire A" and B and C, does somebody know why ? those 5 presets are located in the same folder as all the other presets... I really don't understand
Thank you !

Hey mate,
I've had exactly the same problem for quite some time. But I just found a solution. I signed up here just to share it with you, so I hope it works like it did for me!
So try this:
Go to HD/Library/Application Support/Native Instruments/Guitar Rig 4/Demo DB and copy those 3 files.
Next, open HD/Users/Username/Documents/Native Instruments/Guitar Rig 4/Db and overwrite the files there with the ones you copied.
Voila! Hope it helps!

Is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
Then I came across the grey Safari lozenge with action icons.
This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

Problem with the table control BDC in FV60 transaction

Hi All,
I got the problem with the table control in FV60 transaction.
This is working for 900 line items.After 900 line items it is giving the problem like it is 1000th line item.You can post only 999 line items.
I know we can post only 999 line items,but in my file only 920 line items.
Please give me solution,if anybody come across this situation.
Thanks & regards,
rakesh.

Hello Rakesh ,
your file may have only 920 line items , but based on those line items, SAP may create few more new lines ( based on the clearing recon accounts , inter company transaction ...etc )...
regards
Prabhu

Problem with Creative Audio Control Panel

) Heya, I just bought a SB X-Fi Xtreme Audio and I've encountered a problem with Creative Audio Control Panel. My OS is Win7 x64; I have installed the newest drivers for SB. The problem is that I can't set my setup for headphones. I mean I can do that and it's working untill I turn off the PC or restart the system. After that it always sets for 2/2. Speakers. Any ideas how to make this thing to remember my settings the way I want it's Thanks!

- The problem seems to be fixed Here's the solution for my card: <a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493" title="Linkification: http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493"]http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493[/url]

Problems with the items (control) in forms 9i (Re)

Hello,
I write this problem in a other post and but don't have any feedback about it(So I will give another try:-) )
The problem that I will describe don't happen all the time and is very rare but I want to know if it's a normal bug of forms or something more special of our PL/SQL code...
So here we are.
Is there others developpers here that have problems with the mouse cursor of the user that seems to be "jammed"(blocked, trapped) in a text item (or another control, like a list item). When this problems happen, the user can't go on another field of the forms with his mouse cursor(Mouse click), the only thing that can resolve that is to refresh the page with Internet Explorer, and after that, he is free to go on another field of the forms.
This problem is very rare but happens sometimes.
Thanx in advance!

Hi,
This problem is due to failuer of navigation of mouse cursore. For more specific solution can you give the error message and error code, So that we can have exact picture. Waiting for error code......

Problem with programmatically control histogram color

Hi,
I'm developing a function to display multiple channel histogram. But I can not programmatically control the color. I use XY graph to display, and there's no problem with other type of plots.
Attached is the example vi I use for the test. Please tell me if I make any mistakes.
Inhaler
Attachments:
histogram_colortest.vi ‏38 KB

instead of using plot.color, use the fill/point color.
-Joe

Problem with a Table Control Scroll Down.

Hi,
I´m working with a table control in which I select one of the many lines the table contains and I move it into a structure, I delete the data of the table control internal table and I move the selected line back into the internal table to show only that record. My problem is the following:
Whenever I have to scroll down to select a line, the selected line doesn´t appear afterwards. I believe that it´s because the scroll bar disappears and keeps on showing the line where the record I selected used to be and because the selected record is added in the fist line of the TC.
Is there any way of avoiding the disappearrance of the vertical scroll bar? Or how can I show the record added in the first line if the TC only displays the position where the selected record used to be?
This is the logic I use to show the single record.
READ TABLE TI_ASIGLOT WITH KEY PUSH = 'X'.
IF SY-SUBRC = 0.
    MOVE-CORRESPONDING TI_ASIGLOT TO ST_ASIG.
    CLEAR TI_ASIGLOT.
    REFRESH TI_ASIGLOT.
    MOVE-CORRESPONDING ST_ASIG TO TI_ASIGLOT.
    ST_ASIG-CPEND = ST_ASIG-GAMNG.
    MOVE ST_ASIG-CPEND TO TI_ASIGLOT-CPEND.
    APPEND TI_ASIGLOT.
Thank´s and regards.
Lucila

Well, I´m going to anwser my own question. The problem was that in my TC the top field value was the line number of the record I've selected. So the only thing I had to do to fix it was to asign 1 to the field TC-top_line inside the form where I select the record.
READ TABLE TI_ASIGLOT WITH KEY PUSH = 'X'.
IF SY-SUBRC = 0.
    MOVE-CORRESPONDING TI_ASIGLOT TO ST_ASIG.
    CLEAR TI_ASIGLOT.
    REFRESH TI_ASIGLOT.
    MOVE-CORRESPONDING ST_ASIG TO TI_ASIGLOT.
    ST_ASIG-CPEND = ST_ASIG-GAMNG.
    MOVE ST_ASIG-CPEND TO TI_ASIGLOT-CPEND.
    APPEND TI_ASIGLOT.
    W_INI = 1.
ELSE.
    MESSAGE I889(100) WITH TEXT-T07.
    EXIT.
ENDIF.
z_result-top_line = 1.
(z_result is my TC )
Best regards,
Lucila

Problem with SAP Script (Control Commands)

Dear friends,
I am facing one problem withg control commands. When i use PROTECT.....ENDPROTECT with VAR type window then it is not working instead i use with MAIN type window it is working fine. Another problem with BOX command when i use with MAIN type window then it is not working but when i use with VAR type window then it is working fine. SO i am little bit confused that is there any relation between control commands and window type?
THanks & Regards,
Bhavin

Hi,
There is no restriction to use any control commands on any windows.
The SAP doesnt give any error, but the point of using Protect Endprotect in windows other than main window doesnt apply.
Only main window carries from one page to another. So in order to print certain lines in a single page we use this control command.
Regarding BOX command it works fine on any window.
Thanks and Regards.
Lavanya.

MSI P55-GD65 - Problem with automatic fan control.

Hello.
I wish to share story of my fan speed controller.
Lately I've upgraded my machine to modern specs (look at signature) and I was quite happy about that.
It worked flawlessly for about week.
My H/W Bios settings was - CPU Smart Fan Target = 60°C and minimal fan speed 50%.
I was amazed how nicely GD65 maintained between heat and speed.
Yesterday, I've noticed that my fan is really quiet all the time, even when gaming (before it accelerate speed while hardcore gaming settings). I was quite content about that, until my computer crashed due to overheating while playing Battleforge match.
After reboot I've ran Intel BurnTest and HWmonitor. OH my, what was my surprise when I saw that fan speed is always 50% and do not speeds up when cores are heating up!
I started to checking things out. What I've discovered:
-(CPU Smart Fan ON) Fan is always at minimal speed given in BIOS. It doesn't accelerate even if CPU is burning.
-(CPU Smart Fan ON) Fan speed cannot be controlled by any program (like SpeedFan).
-(CPU Smart Fan OFF = 100% fan speed) Fan speed CAN be controlled by program like SpeedFan, which saves me from fan buzzing.
I've try to fix that by:
-Checking cables.
-Clearing CMOS.
-Updating BIOS to 1.6.
-Praying.
And still nothing.
My conclusion:
Fan speed cannot be change when Smart Fan is on, it locks fan speed at minimal speed given in bios.
Now I just hoping that this is somehow stock fan fault, new Zalman CNPS 10X QUIET is in delivery.

No problem here with Target 55° and Speed 37.5%.
Fan runs at 1330 below 58° and 2050 above which is max.
The CPU is running at 3050 MHz because of XMP 'overclocking'
Have reverted to BIOS version 1.3, due to XMP problems with other versions.

Problems with bill copying control and materials with variant configuration

Hi experts,
I have a problem with a bill copying control and the way that my customer is trying to create and print the Bill (VF01).
Let me explain...They have in a Sales Order a material with variant configuration per position, each one can have many characteristics. This characteristics must be printing on the billing document, creating different bills 'coz the max. lines number is 18, so the bill must change page per material-characteristics.
Example:
Max. Number Lines = 3
Position 10
Material A
     -Characteristic A
     -Characteristic B
     -Characteristic C     (Bill 1)
     -Characteristic D
     -Characteristic E
     -Characteristic F     (Bill 2)
Position 20
Material B
     -Characteristic A     (Bill 3) counting characteristics upside
     -Characteristic B
     -Characteristic C
     -Characteristic D     (Bill 4)
I created on Tx VOFM (Data Transfer-Billing documents) a routine trying to control this jump, but my problem is when I'm creating the Bill document (VF01) this work only by position, the debugging enter per position.. so I don't have any control to tell the program must count the characteristics and create another bill.
So... Somebody can help me..or have any idea to solve this problem.....
Thxs a lot!!!!
Diego Helfer

HI Diego
For our coming assignment, we do have similar sort of situation. Currently we are in Requirements Gathering phase.
Though we do not have Variant Configuration in place, we do have restriction for no..of items to be used for printing in Billing Documents.
Current proposal is that we will restrict at Sales Order Creation. If the number of items are increasing, we will restrict saving the document and loading has to be done again. As itz better to restrict at initial phase.
Our schema is One Sales Order -> One Delivery -> One Billig Document.
   Will post if we can manage to acheive some other way and do request you the same.
Kind Regards
Eswar

Anyone else having problems with the music controls in the control center?

Ever since the iOS 7 post release update (iOS 7.0.2) I've have trouble with the music controls not working properly. Wondering if anyone else was experiencing the same issues....

IslandPrince89 wrote:
That actually helped but it seems that there are a lot of bugs in the iOS 7.0.2 ..
You can use this Link to send your Feedback to Apple
http://www.apple.com/feedback/

TS1702 doe's anybody have a problem with your Hero characters are not seen on the screen in CastleAge and know what to do about it?

Doe's anybody else have trouble with your hero characters not showing on screen and what to do about it. This is on CastleAge HD from Phoenix games ? This is on an Ipone4s.

You'll be more likely to get help with this if you ask in the CastleAge forums, I would suspect:
http://www.castleageforums.com/cforum/
Regards.

Xmod problem with guitar hero control

Similar Messages

Maybe you are looking for