Xmonad: How to display certain applications on all workspaces?

In xmonad I would like to make all windows of certain applications (primarily notification windows) to float on all workspaces. I looked into "copyToAll" but got lost.
Any help appreciated!

When a notification pops up the moment I am switching workspaces, I will not see it. If the notification displayed on all workspaces, I would be able to see it and close it on any workspace.

Similar Messages

XFCE icon box item shows applications from all workspaces

first of all using latest packages...
my XFCE icon box item on the panel shows all tasks from all workspaces regardless of the option "show applications from all workspaces"
the task list item does that properly
what could the problem be?
Last edited by _saiko (2009-04-25 11:04:16)

moljac024 wrote:
_saiko wrote:
whoops wrote:
compiz.
You actually have all applications on one "workspace", it's just divided into several virtual view-ports.
well yes i thought of that since i really use compiz...
but i tried task list item and it works properly even with compiz and virtual ports so that's not an excuse...
Well then, task list takes virtual workspaces into account whereas the IconBox doesn't...
heh well obviously
but if they already removed the feature from task list and ported the icon only display as a separate plugin they should have implemented the "virtual view-ports awareness" too :\

How to combine two applications with different workspaces in APEX

Hi,
Can anyone help out in merging two applications with different workspaces in APEX 3.2 ?
Thanks in advance,

Hello Satya,
>> I am Satya …
Please take one more step to help us and update your forum handle to something friendlier than user123… Thanks.
>> Can anyone help out in merging two applications with different workspaces in APEX 3.2 ?
This is not a trivial task.
You didn’t mentioned if both workspaces sharing the same APEX instance, or they are on two different instances (machines). I believe the latter is a pre-condition to a success.
First you need to remember that importing an APEX component, like a single page, is possible only to the same application that it was exported from. This is still valid if you have the same workspace on two separate APEX instances – one is an import of the other (which makes it an identical copy). Still, the application ID must be the same, or you’ll get the following error: “This page was exported from a different application or from an application in different workspace. Page cannot be installed in this application.”
You can’t simply manipulating the export file, if the two workspaces are sharing the same APEX instance, as all workspaces on the same instance shares the same APEX metadata files, and you’ll receive a “unique constraint violated” error messages. That means you can’t import one application into the workspace of the other, even if you are using a different application ID.
As far as I can see, the only viable way of doing an application merge is to have two identical workspaces, on two separate APEX instances. The two applications should share the same application ID, although this parameter can be changed in the import file. You should export the page in one application – on the first instance – and import it into the other application – on the second instance.
You should also make sure that the exported page ID doesn’t exist on the target application, otherwise it will be replaced by the new imported page. Also, if the imported page include references to shared components that are not defined on the second application, it might also pose a problem.
As I said, this is not trivial. The benefits are mostly depend on the amount and complexity of the pages you want to merge. If they are not many, and simple, you should consider just re-creating them on the target application. If they are very complex, the merge might fail anyway.
Regards,
Arie.
Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.

How to display certain values from ValueHelp

Hi,
how do i display only certain values in ValueHelp of the Variable Input section? currently i see all values that were maintained in Master Data. I have tried different options available in the Business Explorer Tab of the InfoObject in question.
Any suggestions?
SD

Hi,
Refer the follwoing document.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20ecb78c-374a-2d10-c6af-f024f19b785d
I hope it will help.
Thanks,
S

How to display certain field permanantly on AP Invoice entry form

Dear All,
I want to hide few fields and want to show certain fields in Invoice Entry form.
When I go to Folder-Show Field and search for the field The required field get displayed but this activity I need to perform everytime I open the form.
Is there any way to default this field in Oracle form, So that whenever I open the form That field should get displayed automatically.
Waiting for your reply.
Thanking you in advance.
Regards,
AJ

If the condition is met you can fire off a line of script that sets the "presence" property of the Copy tag to either "invisible" (if you want to preserve the space taken up by the tag) or "hidden" (if you want to remove the space taken up by the tag).

How to display "fan" application?

I have been trying to change the Dock preferences to display "fan" but it doesn't work. I used to but not anymore. How do I get it back?

Hi Malhotra,
Thanks for your reply. I have tried with the data available in the link you have mentioned. But stil i am getting the error like
com.sap.tc.webdynpro.services.sal.core.DispatcherException: The requested deployable object 'local/Interappnav' and application 'urlToTargetApp' are not deployed on the server. Please check the used URL for typos.
Here we are not calling any fireplug. so is it the otherway to navigate from one webdynpro application to another application
Regards
Ravi

HT4236 Why will my iPod not sync all the photos I want it to - I get a message saying that it cant display certain images. All my photos are in jpg format and similar size.

Why will my iPod touch not sync all the photos I want it to. I get a message saying it cant display some of my photos. They are all in jpg. format and similar size. Never had any problems before!
Thanks

That sounds exactly like an issue that has plagued McAfee users for around a year.
Try disabling email scanning in your anti virus program.

How to stop certain applications accessing the network/internet

Hi.
How do you stop certain applictions from accessing the internet/network.
Thanks,
Nathaniel

Hmmm.
I'd say that there's probably a setting in the final cut preferences to enable/disable automatic updates. Not sure about Office.
+("Office, Software Update, Final Cut etc.")+
And then there's the "etc"...don't know what that refers to . sorry.
Is this process using an extraordinary proportion of your allocation of internet? Or is it more like on or two percent.?
Sorry, I am not familiar with FinalCut, nor this mysterious "data card" with the allocated bandwidth.
Are you so severely limited by this 'data card' service that you're on such a meager connection allowance? (sounds like the mileage limits on a car that I leased from nissan a few years ago. I was limited to something crazy like 10,000 miles per year, {adding} that's not a lot of miles here in the states)
Message was edited by: Rick Van Vliet

HT3910 How to keep certain applications when wiping iMac?

I'm about to reinstall Snow Leopard onto my iMac and then upgragde to Lion but I don't want to lose purchased apps.
I have Logic Studio 9 and I understand you can use it on only 2 computers. Will re-installing it count as a seperate intallation on another computer or can I just log into my apple account and verify it that way. This is the case with Microsoft Offic 2007. This can only be used on three seperate computers and I don't want the re-installation to count.
Is there a way of returning to factory defaults but keeping selected apps?
Any help would be much appreciated

Michael Hemmings wrote:
Will re-installing it count as a separate installation on another computer?
Yes.
Michael Hemmings wrote:
Is there a way of returning to factory defaults but keeping selected apps?
Not for installer type apps or copy protected programs, only "drag and drop" self contained and "free of copy protection" apps then they have of course be copied off the soon to be erased volume just like users files.
For Logic and other copy protected programs, get a copy of the license key and talk to the developer(s) you can reinstall on the same machine again from the original source without burning one of your allotments.
What the developer will likey do is issue another license key and record it so it's verification when it "phones home"
All they want to do is make sure your not using it more that it's allotment.

Start application in all workspaces

Hello,
I am using Xfce4 and I have the Terminal autostarted when I log in. I do so with this command:
alltray --borderless --skip-taskbar Terminal --hide-menubar --hide-borders --geometry 860x900+10+10
Now this creates it in the first workspace. Is it possible to have it start in in all four workspaces?
Thanks for any help,
Levi

For other searching for this, see the link on
http://www.macrumors.com/mac/?sid=20091026092104
which explains how to resolve

How to display records modified in a workspace(version)?

We have an application, which modified the records for a version of the database (By using "EXEC DBMS_WM.EnableVersioning").
What is the best way to view the records which have been changed in a version from Oracle Sql developer?

<hbj:button                               id="button Id"
     text="button text"
     width="250px"
     tooltip="any help text"
onClientClick="JavaScript:window.open('specify which window to open - name');"
     disabled="false"
        design="STANDARD"/>
javascript window.open is used to open a new window.

How to display a single massage to all the page

Hi
I am developing a webportal with jsp. in this website there are two parts one is Admin and another one is End user part. what ever the Admin Publishes from the Admin Part that will be Updated to End user Part.
Now I have 15 pages in the End User Part and at the Admin Part I have One page to Enter the News and Update it in the Database.
I am using java bean to select the News from the Database.
Now my Question is How to display the News to all the 15 is there any simple way to do this or I have to use this
<jsp:useBean id=""portal" scope="request" class="data.portalBean"/>
<jsp:setProperty name="port" property="*"/>
and access the JavaBean method to select the News and display
Please tell me if there is any simple way to do this
Thank you for your help
Cheers
jofin

Create an include page with jsp:useBean and so on and include that page in all 15 pages using jsp:include.

How to display multiple selected rows in a table inside a popup?

Hi,
I have a table on which multiple selection is enabled. I am able to get hold of multiple selected rows i.e. i am able to iterate over the selected row keys and print their values. Now, my problem is how to display the contents of all the selected rows in a popup? I get the details of only one row when I launch the popup.
Thanks
Karan

Hi,
Not confident if this works or not but just try it...
1. create a ViewLink between the same view Object.
The source and destination wil be the same Vo and the source and destination attribute will be the pk of both Vos.
2. Update the changes in Appln Module.
Open the AM and in DataModel tab .
select the Same VO from which you created table in the DataModel Listbox and select the VL in the "Avaible View Objects" List Box. Add under it(selected vo in datamodel listbox).
3. Refresh DataControl accordion.
4. in your jsff page drag and drop the child vo as a table..
See if it works
Regards,
Santosh.

Protect certain applications against certain developers

Dear Experts
If there is an administrator of apex workspace and he needs to protect or lock certain applications in the workspace against some developers or users of the workspace.
Can this be achieved in current apex release? If No what is the workaround?
Thanks in advance for any help you provide
Regards
Mahmoud

Mahmoud_Rabie wrote:
If there is an administrator of apex workspace and he needs to protect or lock certain applications in the workspace against some developers or users of the workspace.
Can this be achieved in current apex release?
No. Within the Builder there is no user/application access control below the workspace level: workspace developers have access to all applications within that workspace.
If No what is the workaround?
No workaround, just standard APEX practice: if it's necessary for developers to be restricted to working on certain applications, then the workspace must contain only those applications the user can work on.
At runtime, access to applications can be controlled using authentication and authorization schemes.

Xmonad: certain windows/applications get displayed on all workspaces

After recent upgrades (relevant pacman.log: http://pastie.org/8633439), some of my programs get wrongly displayed on all workspaces. Mainly, it's mplayer/mpv, the native Steam client and the native linux game "Heroes of Newerth" (HoN).
I start HoN on Workspace 7 in Xmonad and it should stay there. However, after I have started the game and switch to a different workspace, I still see the HoN screen in its entirety. However, I can issue commands to the program that is on the workspace I switched to. For example, I switched to workspace 1 where I have my browser and pressed CTRL+T a few times. After I had closed HoN, I could see that indeed the browser had a few more open tabs. So the focus switches correctly, yet I still see nothing but HoN. The same happens with mplayer or mpv. When I open any video in it and pause it, everything is as it should be when I switch to a different workspace. However, if I switch workspaces while the video is running, it will also be displayed on all other workspaces above all other programs. So I guess it has something to do with programs/windows that update themselves to show something new. Cause it's the same with every Steam window - whenever the Steam store window updates a screenshot or something, Steam will be on all workspaces.
I have tried to replicate this with Openbox to make sure it's got something to do with Xmonad, and yes, this does not occur in Openbox. A buddy of mine has the same problem with the same programs (plus a wine game), he is running xmonad on archlinux as well.
Here is my xmonad.hs: http://pastie.org/8633442
Last edited by kelnoky (2014-01-14 20:33:11)

To be more precise: I downgraded xorg-server-common (1.15.0-5 -> 1.14.4-1), xf86-input-evdev (2.8.2-2 -> 2.8.2-1), xorg-server (1.15.0-5 -> 1.14.4-1), libgcrypt (1.6.0-1 -> 1.5.3-1). Then i could switch workspaces as intended. But i got lots of errors with other applications. Like mplayer didn't work because the newer libgcrypt couldn't be found etc. And ofc i don't want to use some old crypto libs anyway.
But that has shown me, that somehow the upgrade to xorg-1.15 had broken things. But i can't really say if that is xorgs ord xmonads error, because it works well with openbox.
I'll take a look at xcompmgr. Thanks for the hint.
Edit: It works like a charm. Thank you very much.
Last edited by verno (2014-01-16 00:45:18)

Xmonad: How to display certain applications on all workspaces?

Similar Messages

Maybe you are looking for