XMonad recompile failing - path problem?

I have XMonad setup on my machine, and whenever I try to recompile from within the environment (mod-Q), I get the error:
collect2: fatal error: cannot find 'ld'
compilation terminated.
However, if I open a terminal and do xmonad --recompile, it works fine.
Also, a few applications such as firefox and intellij don't run from dmenu/yeganesh, I have to launch them from the terminal.
This makes me think that xmonad doens't have the same $PATH as my terminal environment. How would I check this?

thanks for your help skottish!
running ghc-pkg list displayed that i had two haskell-time's installed. querying the aur using paktahn said that i had haskell-time installed with ghc, which was correct but yaourt said i didn't have it installed. so i installed the package with yaourt, removing both dependancies defined in the pkgbuild, because those always sent yaourt into a terrible loop. the build succeeded and i promptly removed the package. I then reinstalled ghc, xmonad-darcs, and xmonad-contrib-darcs using paktahn. Everything is working splendid now. baller.

Similar Messages

  • Mirrored volumes pathing problems

    mirrored volumes pathing problems        
    I am running Windows 2008 Server Datacenter.
    I created some mirrored volumes with disk administrator.
    These disk are in a fibre channel fabric.
    All paths go down so disk administrator losses the disks.
    All paths come up and disk administrator recovers the disks.
    The mirrors all show as failed.
    There are disks that show as failed, and disks that show as foreign.
    When I import the foreign disks. 
    One of the mirrored volume starts resyncing, and the other mirrored volume comes up as 2 simple volumes.
    Both mirrored volumes were in sync when the paths went down.
    So I expected them to come back up as mirrored volumes when the paths come back up.
    There is no I/O running at the time of the path failures.

    So let me see if I understand correctly.
    2 volumes presented to 2008 Datacenter via fibre channel
    Volumes are then mirrored via windows
    Disks drop off line and then the second mirror is 2 simple volumes but the first is rebuilding.
    So question 1 - Is it for read performance that the disks are mirrored?
    Question 2 - what disk errors appear in the event log when this happens
    Question 3 - whats the HBA used in the server
    Question 4 - Whats the backend staorage
    Question 5 - Is MPIO being used?
    Do we know the reason that the paths became unavailable? That would be probably my biggest concern.
    Also when the simple volumes came back up was the data available?
    Brad Held http://windorks.wordpress.com

  • Path problem for "Load VRML File.vi" in EXE

    Hello,
    The new integrated 3d Picture Control functionality in LabVIEW 8.20 is amazing.  It is a really easy to use implementation of OpenGL.  I've discovered one bug/issue when building VI's to an exe that includes the 3d Picture Control:
    If "Load VRML File.vi" is used, in the executable, you will encounter a LabVIEW Error 7 due to a path problem in the following vi:
    NI_3D Picture Control.lvlib:Load VRML File.vi->NI_3D Picture Control.lvlib:NI_Old 3D Toolkit.lvlib:Read WRL file.vi->NI_3D Picture Control.lvlib:NI_Old 3D Toolkit.lvlib:Initialize.vi
    The File Not Found problem will prevent the vrml file from loading.  Navigating down into the subVI's of the "Load VRML File.vi" shown above easily reveals the problem.  I've included a screenshot of the diagram of that VI.  The relative
    path resulting from the double "Strip Path" operation is not valid
    in the executable.  I'm not sure where that "definitions" file resides
    in the runtime deployment or if it's even included, so fixing the path to account for the differences in the exe vs. development environment path is not an option.   I'm also usually very hesitant to make any mods to anything in vi.lib.
    For the development environment, the "definitions" file can be found at: [LabVIEW 8.2 dir]\vi.lib\picture\3D Picture Control
    The easy fix is to include the "definitions" file in the same directory as your exe when you build.  Fortuitously, this does the trick because the first strip path gives the path to the exe and then the second strip path results in the path to the directory where the exe resides.
    Hopefully NI will fix this path reference properly in future revisions.
    Enjoy!
    Attachments:
    WRL Debug.jpg ‏77 KB

    Hi Chris,
    Thanks a lot for the feedback!  This was reported to R&D (# 47F9DJIQ) for further investigation.
    Regards,
    Justin D

  • Path problem while refering the file in tomcat

    In the jsp file i am going to update one property file which resides in the same folder using file output stream.
    it gives path problem.how can refer the path of that file

    try using getServletContext().getRealPath(java.lang.String path)..You can check out the API for more detail regarding this method.

  • Path problem when moving from Mac to PC

    Adobenoob wrote:
    Hi,
    I'm trying to move our Adobe InDesign installation from Mac to PC, but I ran into a path problem. A lot of our publications/documents in Adobe InDesign have linked to pictures in the filesystem (Windows 2008 R2 server). It goes like this:
    DTP:Produktbilleder:0893ny:0893_467+468_05_Agrp frit_.tif
    And is linked like this directly from InDesign.
    The actual path is:
    /Volumes/DTP/Produktbilleder/0893ny/0893_467+468_05_Agrp frit_.tif
    On the PC I cannot use that path notation and have to go like this:
    F:\DTP\Produktbilleder\0893ny\0893_467+468_05_Agrp frit_.tif
    When the publication/document in InDesign have the Mac link "hardcoded" the PC path will not work.
    Is there a relatively easy way to get the InDesign on PC to use the Mac link or does one have to change all the "hardcoded" links in the publications/documents?
    I hope you understand my question - don't hesitate to ask for more info.
    Best Regards
    Brian

    Hi,
    I have just tested the function - and it seems that the files have to be in the same folder. It is not recursive as I see it. And since we have tens of thousand of pictures in thousands of different folders it does not seem to work.
    Any other suggestions?
    Regards

  • Path problem in windows os

    Dear friends,
    some time I meet a strange class path problem under windows enviroment. that is, the class path uses "/" to splite directory while not "\". so java will report error message like "NoClassFoundError: com/boland/...". I think there should be a way to adjust this environment problem. but I don't know how to set this. I will greatly appreciate if you happen to know this and let me know.
    Best wishes,
    Sam

    You reported an error in a package statement or reference. This is nothing to do with the OS folder structure per se, altho that is how it is implemented on a given platform like windows. Classpath statements are NOT platform independent, due to path separator issues. You should not use a system-wide classpath variable anyway, as this is really quite bad practice. Instead, create a run script for you program, and put the -cp switch in there. In any case, you should be referencing packages (separated by dots) in there anyway, not actual paths.

  • Path problem during  Change of Original

    Hello,
    I am facing path problem while changing the Original file in a DIR.
    let say i created a DIR x and attached file a.txt from c:\ and  saved the DIR.
    Now if i use cv02 and select a original for change the popup window comes with data carrier and original file path  the path is shown as c:\a.txt which is actual original path.
    if i click on continue it is opening the c:\a.txt files and  changes are done on the original file on my pc.
    This way my original file is changed on pc and in DIR also.
    I want to know how to avoid this?.
    Regards
    Shiv

    That is why they call it document "Management".  The Original File is in the "Vault" where it can be managed, not on the desktop.  If you want to protect/save the file on your desktop, set the flag in the config of the workstation application to not allow "rename" of the temporary file.  You are just attempting to circumvent the intended design of the system. What you should really do is set the flag to "delete" the file after check-in.

  • File path problem

    I have looked an read through almost all the file path problem post possible and I am still having issues maybe one of you guys can help me, here are my files
    I am doing this as an example so that I can apply it to all of my file problems....
    Harold Timmis
    [email protected]
    Orlando,Fl
    *Kudos always welcome
    Attachments:
    pathexample.zip ‏122 KB

    First of all, to troubleshoot the problem it would help to put some filepath indicators at each point so that you can see what is going on. Also, in your exe having an error dialog "Simple Error Handler.vi" to let you know what LabVIEW didn't like in the exe.
    Now, when you run a top level ("Main.vi") and use the "Current VI's Path " in the development mode it returns <Filepath>\"Current path"\Main.vi. So stripping once will get you to  <Filepath>\"Current path" .    Now if you make it into an exe the "Current VI's Path" returns <Filepath>\"Current path"\"Name.exe"\Main.vi so you are "nested" one deeper.
    I use the following construct to determine whether the vi is being used as in the development environment or as an exe, the parse the path accordingly, although in this instance it is used to supply different directory names to a little more complex file system.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Help File Path Problem

    Hi,
    I recently upgraded to a new computer and I have Develope toolbox and some other extensions from Web Assist and curiously when I click on HELP button in any of them I receive in error message like the one below.....virtually all of the error messages are the same. I known that it is a path problem, but when I follow the path indicated in the error message I find the file exactly where it should be on the computer.....hmmmm...any ideas out there?
    Firefox can't find the file at /MacHD/Users/jimelander/Library/Application Support/Adobe/Dreamweaver 9/Configuration/Shared/DeveloperToolbox/classes/temp.htm

    I think un install ADDT then reinstall it..
    Hope this helps
    Mohnkhan
    http://www.mohitech.com

  • Shortest path problem in ABAP

    Hi experts,
    Is it possible to write the code for the "Shortest path problem" in ABAP?If yes, what is the code?
    Moderator Message: Don't expect members to spoon-feed you
    Edited by: Suhas Saha on Jul 25, 2011 11:13 AM

    Hi munish,
    I dont think there is any thing wrong with the ABAP code.
    Try testing your ABAP mapping using transaction code SXI_MAPPING_TEST in XI.
    Enter the Details asked and then enter TEst data in XML format.. 
    Also, you can make use of the Trace element to find out if there is any thing wrong with the code.
    Include the following Statements after every step in the ABAP code to ensure that the particular step is completed successfully.
    data : l_trace type string.
    concatenate l_trace '<Message you want to display>' into l_trace.
    trace->trace(level = '<level>'
    message =l_trace).  
    The trace is visible in SXMB_MONI (click on "Trace" in the left pane to view).
    using this you will get to know i the code is functioning as desired.
    Regards,
    Yashaswee.

  • Fail-box problem

    Hi!
    I have some problem and I need help..
    fail-box problem with lokal and network system.
    I dont know how to solve it'
    Thank you...

    Are you still facing the same issue ? if yes then please post the screenshot of exact error and few details such as if you are getting this error while opening a specific file or on double click on Muse itself ?
    Thanks,
    Sanjit

  • Custom mySQL  - updating path / problem with pre-installed mySQL

    I've got a custom mySQL installation setup and humming along on a 10.6.4 server. The problem is although I've updated the paths to search on usr/local/mysql/bin, when I try to access by using the shortcut mysql i get this error: Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' . To be clear, mySQL is working fine - it's just the shortcut that's not.
    This makes me think that the shell is looking first at the default [not enabled] apple mysql install. So something in my paths must be wiggy.
    I had this working perfectly on my 10.4 Xserve but the no one, I'm at a loss.
    Has anyone else run into this - any tips? I'm not going to be running the Apple install of mySQL.

    Actually, my problem is not with the socket location but with the data directory location. But I think is caused by the same path problem to data as yours was with socket. I have posted this question to the Mac OS X Technologies > Unix forum. If you could take a look, I would appreciate it.
    Thanks.

  • Encode failed - No problems in Check Project

    Encode failed - no problems shown in Check Project. Is there a way to post screen shots of the various information required for other users to have in order to comment meaningfully on what might the various problems might be? I have a document in which I have saved various screen shots of the progress up to the Encode Failure. I also have other projects that have transcoded successfully. Any help is appreciated. This is a new avenue for me, so some protocols may be lacking, but I catch on eventually.
    Baltoe - someone took my name - so icmicmicm was the default.

    For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
    More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
    http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS 
    For ALL versions Long File Names or odd characters Cause Crashing http://forums.adobe.com/thread/588273
    And #4 Here http://forums.adobe.com/thread/666558?tstart=0
    And This Message Thread http://forums.adobe.com/thread/665641?tstart=0 
    An Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/

  • Help Files Path Problem

    Hi,
    I recently upgraded to a new computer and I have Develope
    toolbox and some other extensions from Web Assist and curiously
    when I click on HELP button in any of them I receive in error
    message like the one below.....virtually all of the error messages
    are the same. I known that it is a path problem, but when I follow
    the path indicated in the error message I find the file exactly
    where it should be on the computer.....hmmmm...any ideas out there?
    Firefox can't find the file at
    /MacHD/Users/jimelander/Library/Application
    Support/Adobe/Dreamweaver
    9/Configuration/Shared/DeveloperToolbox/classes/temp.htm

    OleLena wrote:
    > Firefox can't find the file at
    /MacHD/Users/jimelander/Library/Application
    > Support/Adobe/Dreamweaver
    > 9/Configuration/Shared/DeveloperToolbox/classes/temp.htm
    I'd check to ensure that you have the latest versions of the
    WebAssist extensions as this may have been fixed. I seem to recall
    seeing this issue when the primary browser (from Dreamweaver's
    perspective, the one that F12 or preview in browser opens up) is
    not open when the help is accessed. Try having your browser open
    and then access the help.
    Danilo Celic
    |
    http://blog.extensioneering.com/
    | WebAssist Extensioneer
    | Adobe Community Expert

  • Partition failed: A problem occurred while resizing Core Storage physical volume structures

    Hi everybody,
    I have just installed Yosemite on my iMac and everything works right.
    iMac 27" late 2012
    3,4 Ghz intel core i7
    32 GB 1600 Mhz DDR3
    3TB Fusion drive.
    Now I need to create a bootable partition to install a copy of Mavericks because some FCPX plugins do not work on Yosemite.
    To create a new partition I use Disc Utility, but each time I try to create it the mac show me this error:
    partition failed A problem occurred while resizing Core Storage physical volume structures
    Why?
    What can I do?
    P.S. FCPX does not work on a virtual machine, so I have to install it on a new partition
    Thanks

    Ditto here.
    Same problem - I have a Apple_Corestorage partition that can't be unlocked.
    You have to do this command to free up the Corestorage partition
    diskutil coreStorage delete logicalGroupUUID
    In your case, it'll be:
    diskutil coreStorage delete E2CDC5FC-DA6E-4F43-B524-8925ABB23883

Maybe you are looking for