[XMonad/X11] Fn + key != number

I just recently installed XMonad on my Asus UL30 laptop and I'm still working on getting it to work properly.
The problem I'm having now is as follows: My laptop's Fn+key combinations mostly work, except for the numbers. Fn+P does produce "*", but Fn+O does not produce a "6".
I am using HAL for keyboard configuration.
Excerpt from my xorg.conf:
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "asus_laptop"
Option "XkbLayout" "cz"
Option "XkbVariant "bksl"
EndSection
Thanks for your help.
Last edited by Arthenik (2010-04-03 11:45:05)

Unfortunately my old Mini does not have wireless capability. So I could not test the keyboard.
I did however find two preferences files. I suggest you find them and trash them.
Disconnect the keyboard first. Then find the two .plist files. They are:
com.apple.KeyboardViewerServer.plist - this is in Users / yourself / Library / Preferences.
The other is: com.apple.keyboardtype.plist - this is in Library (root level) / Preferences.
After trashing both these, it's a good idea to restart the computer, and then once again pair the keyboard.

Similar Messages

Windows Vista 32 and 64 bit key number

Hello
XP has been installed from a disk partition (D)
My notebook has been upgraded from XP to Vista 32 bit with the CD I got from the pakage.
In the buttom the is a stamp with the key number.
I have CDs both with Vista 32 and Vista 64
1. Is the key number the same to the 32 and to the 64 bit
2. I would like to format the C drive.
3. Can I install Vista 64, from the CD?
Thank you for your help
This question was solved.
View Solution.

No worries. Yes, you can perform an install of Vista with the DVDs that you have. You can reformat the hard disk as part of the installation.
Before you begin, go into the Device Manager to see which wireless adapter, graphics adapter and lan adapter is installed and write it down. Doing that will save you some time.
You will need the following DVDs from what you have stated the notebook was delivered with..
Operating System DVD Windows Vista Business SP1 (64-it)
Application and Driver Recovery DVD 32-bit & 64-bit for Windows Vista
Write down the twenty five character license activation key before you begin. Enter it when requested to by the Windows installation script. After the installation is complete use the driver disk to install the drivers. If HP Support Assistant is available on the driver and application disk, install that also.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I've always had PSE 7.0, but I guess my computer has an issue reading the Installation CD I have for it, so I tried to manually download it from the official website, but when I go trough the whole process, it does not want to accept my product key number

I've always had PSE 7.0, but I guess my computer has an issue reading the Installation CD I have for it, so I tried to manually download it from the official website, but when I go trough the whole process, it does not want to accept my product key number... What do I do?
It's either my computer because it's old, or something is wrong with my cd installer. I don't know, but I just want to install my PSE 7.0, but it does not work even on the official website with my product key #.
PLZ HELP ME!

I've always had PSE 7.0, but I guess my computer has an issue reading the Installation CD I have for it, so I tried to manually download it from the official website, but when I go trough the whole process, it does not want to accept my product key number... What do I do?
It's either my computer because it's old, or something is wrong with my cd installer. I don't know, but I just want to install my PSE 7.0, but it does not work even on the official website with my product key #.
PLZ HELP ME!

I purchased a download version of Lightroom 6 from Amazon and when i write the license key number i'm getting this message " We are unable to validate this serial number for adobe Lightroom. Please contact Customer Support. "

I purchased a download version of Lightroom 6 from Amazon and when i write the license key number i'm getting this message " We are unable to validate this serial number for adobe Lightroom. Please contact Customer Support. "

contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html

Where can I get a downloadable copy of Adobe Acrobat 9 Standard? I have my original serial (key) number, but I lost my actual software.

Where can I get a downloadable copy of Adobe Acrobat 9 Standard? I have my original serial (key) number, but I lost my actual software. I am trying to move my Adobe to a new laptop.

Actually, you are out of luck if you are looking for Acrobat Standard. I have run into a problem because the link is for Adobe 9.0 Pro and the serial no. for Std. won't work. I asked Adobe customer (chat) service for a downloadable of the Standard and they said they don't have one. Did you get the Std. version as part of the preinstalled software on your computer? If so, it would be on the recovery media of your old laptop but I don't know how you would retrieve it from there. I am in the exact same boat as you are. Let me know if you find out how to get the media for the Standard by responding on this thread. Thanks.

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...????

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...???? In the box with the disk came the product key, have put it in and it doesnt work. Please help..x

unfortunately - you can not. you can't even buy outlook by itself at microsoft's own website.
does it have to be outlook? maybe you can get away with using something else that's outlook compatible.
how about trying Thunderbird for Mac OS?
or maybe you can call apple and let them know you purchase the wrong version - they might give you a break and just pay the difference for the home and business version.
good luck

Need product key number for installed Robohelp HTML

Hello,
Can anyone tell me how to determine which product key number
for Robohelp HTML X5 is used on a particular machine?
We have two X5 licenses here, but I only want to upgrade one
license on one machine. I do not know which product key number was
used to install X5 on either machine.
I'd like to maintain older projects using X5 and upgrade one
license to develop new projects using Robohelp 8.
From what I understand--and PLEASE correct me if I am
wrong--I can run both versions on the same machine as long as I
install in different folders.
Deb

I don't think there is any way of telling but suggest you
phone the activation people. If anyone knows, they should.
http://www.adobe.com/activation/phonenumbers.html
You can install RH7 on a machine with X5 but you will have
issues if you need to use RoboHelp for Word in X5. Importing Word
docs and printed documentation will still be OK.

Keyboard/ten key number lock

I just purchased a TrackPoint keyboard (55Y9053) and Ten Key (41A5090). When I plug the two into my computer the ten key number lock, locks the number pad on the TrackPoint keyboard. So when I go to type on my keyboard, letter keys I,o,p,j,k,l,n,m,, come out as numbers. Is there a way to get these to products to work together without the number lock from one affecting the number lock on the other? Thanks.

Hi, Rachel, and welcome to Apple Discussions.
A Num Lock light that stays lit is sometimes a symptom of a deeper problem. Try resetting your Powerbook's Power Management Unit. Does that help? If not, run the Apple Hardware Test from your Powerbook's original Install & Restore DVD, and let us know what AHT reports.

Invalid key number for CRforVS_13_0

why diplay invalid key number when I add a new crystal report in VS 2010?

You can use a FTP client (or your browser if it supports FTP) and download from the Adobe FTP server (ftp.adobe.com). The files are in /pub/adobe/cs6/downloads :
Windows (launch the .exe which will open the 7z file):
ftp://ftp.adobe.com/pub/adobe/cs6/downloads/Photoshop_13_LS6.7z
ftp://ftp.adobe.com/pub/adobe/cs6/downloads/Photoshop_13_LS6.exe
Mac :
ftp://ftp.adobe.com/pub/adobe/cs6/downloads/Photoshop_13_LS6.dmg
Previous versions are also available in /pub/adobe/photoshop/win and /pub/adobe/photoshop/mac
These folders are public so you don't need any identifier to connect.

Recover registered software key number ?

I have been caught out upgrading to a new macbook pro ( the old one died ).
I have the box and key no. for the upgrade to FC Studio 2, which I had purchased in the uk but cannot locate the software key number for the original FCP software I originally purchased through a reseller in Thailand in 2005. Both original and upgrade were registered with Apple at the time of purchase.
Does anyone know who/how to contact Apple to attempt to resolve this issue, it really isn't very clear ?
Thanks.
Will.
(freelance editor)

http://support.apple.com/kb/HT1861
MtD

CS6 with Product key number but no serial number

I purchased CS6 from Adobe Support (email address: Help And Support <[email protected]>) and obtained a product key number but no serial number. How come? Is my purchase legitimate or did i get scammed?

Hi,
I don't know if anyone is still looking at this thread but I have just dealt with the same Adobe 'Help and Support' with the email [email protected] and found you when I looked to see if there was anything about them online.
My story as short as poss – I had problems running Photoshop Elements 11 after upgrading to Mac OS X Yosemite. Some people told me it could work, others no, so I tried to get some information from Adobe. I looked for 'Help' on Adobe.com and wrote in my enquiry on the recommended 'Chat' option. This morning I got a response and was asked if I was available to web chat about it on Skype. Everything was headed 'Help and Support' and all the Skype messages had a little Adobe logo with 'Help' by them – so I assumed it was all legit and I was actually dealing with Adobe.
They told me PSE 11 was incompatible with Yosemite but said that as an existing customer I could upgrade to PSE 13 for a discount. This seemed a good deal so I said OK. They said I could download it immediately but they'd need remote access to my computer. They started installing PSE 13 and though I started to wonder about how long they needed remote access for, things only began to look really weird when it came to paying, which was to a Moneygram account in India. Also I got a confirmation email from that adobe24x7 address.
By that time though I'd got so far into it I was worried what would happen if I pulled out, and so I went ahead and paid them (equivalent of $78 US). They told me they'll send a full serial number by email within 72 hours. When I said to them 'you're not actually Adobe are you' they said 'We have affiliation with Adobe through Commission Junction'. The named 'Support Manager' on the messages is Amrita Singh.
They finished the installation, and so far the PSE 13 seems to work fine. But like you I have no idea whether it is legitimate software or not. I called Adobe here in the UK and they say they have no connection with adobe24x7, didn't seem to have it on record as a scam address, but are going to get back to me.
I'm normally careful with scammers so this makes me feel really dumb. But – the big question – since they had access to the computer for so long, were they fishing for anything else? If they are real scammers this is a possibility. When I reported it to Adobe they told me to cancel the payment but I said I didn't want to in case adobe24x7 took any reprisals.
So, if CS5 and Yosemite is still reading – did they ever get back to you when they said they'd reimburse you? And have you had any other bad consequences since you were in contact with them, bank accounts, passwords being compromised etc?
Am wondering how much I need to panic! Thanks for any information....
And, a wider issue, shouldn't Adobe show a little more concern that their 'Help pages' are being hacked into so easily?

Adding Key Number data to clips

I need to generate a cut list with key code data for a neg cut for a commercial. I've never had to do this in FCP. I media managed my cut and was hoping to just manually input the key code info to the truncated clips and export a batch list or EDL. But I can't add data to the key number field.
Unfortunately, I'm in a bit of a hurry, so don't really have time to learn Cinema Tools from scratch. But we never had a telecine log from the original dailies, so that may be moot anyway.
Any ideas???

Rizza,
There are so many ways to do this but My suggetion is that u create one table OBJECT_ID_MAX in ur database and a class named OIDProvider.
OBJECT_ID_MAX contain 2 columns : First, for holding numbers. Second, for holding class name(not fully qualified)
This OIDProvider will responsible for inserting/reading from OBJECT_ID_MAX table. Whenever u want to persist ur object use this provider class to fetch data from the above specified table. If the data does not exists then insert the data from Zero or one depending on ur requirement. If the data exists then take the data increment it.
This might not saw u a better solution but in this case u dont need to depend on Database features. your code will work on any database and u have the control on Id generation.
The other solutions include Stored Proceures, Sequence(Oracle), Identity(SQLServer).

Lost key number

I need to re-install my FCP 5.0 upgrade, problem is i cant find my 4.5 reg. key number, i have my 5.0 upgrade number but not the 4.5, I still have my original receipts of both software and i had registered them with Apple.
i am at lost, don't know what to do, any ideas?

Oh Thank you David, will do just that, C.

Finding product key number

I have an IQ524 All-in-one computer, I received the computer with Vista and a couple of months later I got a packet of disks from HP for windows 7, to which I promptly installed . I want to install windows 10. I just found that I can go to Cnet, which sends me to the download site. At first I couldn't find my product key, the key I have on my computer is only 20 letters and numbers long. I just found the 25 number product key on the backside of my computer, but that, I am guessing is for the Vista OS. The packet of disks, to the windows 7 OS, have no numbers on it what so ever, so I have no idea what the product key number and I don't think I ever had that number. Where can I find or is it possible to get another product key number for windows 7 so I can install Windows 10 onto my computer? Now that I think about it, do I need a product key number (for windows 7) if I have the number for Vista?Thanks in advance...Fred

That's what I thought, kind of...It's just that, I know that it probably will be a while before they send Windows 10 to me and I wanted to jump at the chance to pick it asap. But, if that's not the case, I can wait, I will have to wait. Thanks for the info!--Fred--

Upgrading to QuickTime Pro does not accept the key number I Bought

I tried to upgrade to QT Pro but the Apple store does not accept billing address from Puerto Rico. I called Apple and asked if my brother(who lives in Florida) could buy the key number using his credit card and then e-mail the key number to me. The guy at Apple told me that I can do that. Now Quick Time does not accept the Key number bought thru my brother. It say invalid number.
Please help me

QuickTime Pro Registration, Support & Questions

[XMonad/X11] Fn + key != number

Similar Messages

Maybe you are looking for