XMP data issue with mixed up audio

I have a lot of xdcam (+similar) footage in a rather large project.
We move the project around a fair bit to different systems/editors etc.
A couple of times we have had audio in some of the footage all muddled up. Not in sync at all, in fact as if
a time displacement effect has been placed on the audio. Really weird!
I sorted through the forum and found others had the issue and a fix was to delete all the cache files.
This did not work for me and after alot of trial and error I found that if I deleted the .xmp file associated with the media and then reopened project and relinked
all was fine, back to the way it was.
As a precaution to not have to check all cut programs each time we change systems I'm thinking of deleting all .xmp files associated with the media each time as a precaution.
My question is this:
If I turn off "Write XMP ID to files on import" will this solve my problem? Why is this function needed?
Would I turn off "Enable Clip and XMP Metadata Linking aswell?
Basically my project is huge and important, I can't afford to have a corrupt .xmp file placing egg on my face.
Thanks in advance

Shrinivas,
You mentioned PIRs in your most recent post, which you hadn't mentioned previously. I won't address that topic in this post; PIRs and Dependent requirements are completely separate objects and troubleshooting is quite different. In APO, DepDmd is the equivalent of an R/3 reservation. It is usually linked to a planned order.
Unfortunately, SAP didn't do a very good job in CCR with reservations. Note 508667 speaks about manual reservations, but I have had the same problem with ProdRes (which are not manual) and I solved it following the instructions in this note. You basically delete the orphaned objects using SE37 to execute Function Module /SAPAPO/DM_RESERVATION_DELETE. Although the note refers to old APO releases, Note 573091 (release independent) still quotes this method. Sheesh, you'd think they woulda fixed this by now.....
Another thing to try when all else fails: virtually any type of order in APO that still exists in LiveCache can be manually deleted if you know the GUID. Look up the GUID using the LiveCache data browser (/SAPAPO/OM16). Then plug the GUID(s) into program /SAPAPO/OM_DELETE_INCON_ORDERS..
Rgds,
DB49

Similar Messages

Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

You may need a 3rd party application to view the DVD in a wWindows format such as
http://flip4mac-3.en.softonic.com/mac
https://www.macupdate.com/app/iphone/5758/vlc-media-player

Issues with 'Mute' in Audio Track

Hi All
1. Using Premiere Pro CC (Fully Up to Date)
Was wondering if I could get assistance with what I believe is an issue with the Mute Button in an Audio Track. Firstly my understanding is that, if I use the 'Mute' button either in the Audio Mixer or the icon in the Timeline to mute a clip or track, it is only a temporary action and once you uncheck mute the track reverts back to it state before the Mute.ie normal audio. I have been doing some voice overs directly into the timeline using a USB Microphone / Headset and on those occasions have gone through the steps of Arming, Solo (The Voice Over Track) and then record. I am not sure if this is related but just included to give a background. When checking the levels and doing a bit of fine tuning I find the following issue. As the play head moves along the timeline if goes into a Mute condition and also appear in the Audio Mixer as Mute. It is though it is seeing a 'key frame' that tells it to mute at that point, hence my earlier question regarding (when Mute, is it temporary). I immediately uncheck Mute but when I recheck over that area of the video it is On/Off On /Off. I have tried to see if there are 'key frames / markers that indicate start and end of "Mute' in that Audio track but no luck.
Am I correct in the assumption that mute is a temporary action and should not be a permanent action at that point, or have I done something to create this issue.
Thanks for any advise.

I just read some related threads and I am beginning to suspect the action of the 'Solo' function could be causing the issue. I can not say for certain but I did some other VO in another sequence in the same project and only used the 'Mute" in the other tracks, not using Solo didn't seem to have this issue. Then I did a bit of reading in an earlier CS3 manual that advised using 'Solo' now I seem to have this issue. I totally agree have tried different audio, removing area of offending audio but still comes back??????

Issues with mixer etc for Audigy SE in Windows 7 64bit

My system is currently Windows 7 Home Premium 64bit and I have just installed the SB Audigy SE PCI card.
I have uninstalled the onboard sound software and disabled the onboard sound in the BIOS.
I have disabled all audio devices showing in the sound/playback devices.
I am hearing audio fine on the system but there are issues I would like to try and resolve. When I attempt to launch the applet to control the mixer, select speaker config etc I receive an error stating that the hardware that the application supports is not found.
I have downloaded the latest software and run the auto update to be sure that this is the case. I have attempted to run the applets from the installed folders to see if that would help. I have set admin privledges for the applets and even attempted to run in compatibility mode for Windows XP SP3. None of this hel
ps.
I have searched the forums and found several threads that list the error, but the posts I found were either not for this card/windows version or not answered. All of the threads found were at least several months old. I am familiar with working in the BIOS, working in the registry and with hardware troubleshooting.
I would like to get these working as the sounds are not quite to my liking with the current config. I do not do any audio editing, but I use my system extensi'vely for audio playback and for gaming.
Thank you in advance.

here, it's the application which i boxed in green;
http://img99.imageshack.us/img99/2382/unledign.jpg?
please note the requirements which tells that application(BasicAudio Suite) doesnt supports win7 either 32/64bit.
trust me, i tried that with my XP SP3 and it game me troubles either. by reverting my XP SP2 made it work cuz it tells supports only XP SP2.
we need that application so that we can tweak more with the audio like; equalizer, diffrent soundfields etc... yeah, there was a big difference when we can tweak it more specially with the equalizers. better bass, treble and everything.
so there's no way we can fix/access that when we are into win 7, Alchemy has nothing to do with it btw... i have it either.
for now our tweaking would be limited with this; ( Creative Audio Control Panel which you could find at the Start menu button)
http://img98.imageshack.us/img98/42/unledvy.png?
adjust that slider according to your liking, mostly it just adds/reduce the echoes with the audio as far i had observed.

Exporting from PPro CC - Exporting using Match Sequence Settings issue with 24 bit audio

I am having an issue exporting my sequence which contains final AIFF mix (24 bit 48 kHz) into a 'same-as-source' ProRes 422 file with 24 bit audio. I am specifically trying to export media with 'Match Sequence Settings' checked to create an identical output of what my sequence is. I wind up only creating a PR422 with 16 bit audio rather than 24 bit audio.
My sequence contains ProRes 422 media and 24 bit AIFF final stereo mix (1 audio file) from our Sound department.
My sequence is currently setup as "Custom" at 1920x1080, 23.976 fps, Square Pixels, Progressive, etc. Audio is 48 kHz (I don't see an option for choosing different bit rates in the 'Sequence Settings').
Using 'Match Sequence Settings', my options to alter the audio are "greyed out" and unavailable. I'm not sure why 'Match Sequence Settings' doesn't recognize that I am cutting with 24 bit audio and, instead, only exports 16 bit audio.

Always skip Match Sequence Settings and set up the export manually.

FYI - High precision data issue with sdo_anyinteract on 11.2.0.3 with 8307

For anyone that may happen to be experiencing issues with SDO_ANYINTERACT on 11.2.0.3 with high-precision geodetic data, I currently have a service request in to fix it.
The issue we have is with locating small polygons ("circles" from 0.5"-4") in the 8307 space. The metadata we have specifies a 1mm tollerance for this data, which has worked fine since (as I remember) 10.1. Support verified it works fine up to 11.2.0.2, then is broken in 11.2.0.3.
So if you are pulling your hair out - stop. ;-) The SR# is 3-5737847631, and the bug# (will be) 14107534.
Bryan

Here is the resolution to this issue...
Oracle came back and said what we have at that tolerance is unsupported and we were just lucky for it to have worked all these years. They are not going to fix anything because it technically isn't broke. We pointed out that the documentation is a little unclear on what exactly supports higher precision, and they noted that for future updates.
When asked if they would entertain a feature request for a set of high-precision operators (basically the old code) in future release - they basically said no. So for the few items that we much have higher precision - we are on our own.
What still makes us puzzled is that apparently no one else is using high-precision data in lat/lon. Amazing, but I guess true.
Anyhow, here is what we used to use (up to 11.2.0.3) which worked fine at a 1mm tollerance:
Where mask_geom is:
mask_geom      :=
         sdo_geometry (2001,
                       8307,
                       sdo_point_type (x_in, y_in, 0),
                       NULL,
                       NULL);
SELECT copathn_id
INTO cpn
FROM c_path_node a
WHERE     sdo_anyinteract (a.geometry_a2, mask_geom) = 'TRUE'
       AND node_typ_d = 'IN_DUCT'
       AND ROWNUM < 2;Basically this finds indexed geometry and compares it to a single mask geometry (a simple point for the x/y given). Only one row is returned (in case they overlapped duct openings - not normal).
Since this no longer returns any rows reliably for items less than 5cm in size, here is our work-around code:
SELECT copathn_id
INTO cpn
FROM ( SELECT copathn_id,
                 node_typ_d,
                   ABS (ABS (x_in) - ABS (sdo_util_plus.get_mbr_center (a.geometry_a2).sdo_point.x))
                 + ABS (ABS (y_in) - ABS (sdo_util_plus.get_mbr_center (a.geometry_a2).sdo_point.y))
                    distdiff
            FROM c_path_node a
           WHERE sdo_nn (a.geometry_a2,
                         mask_geom,
                         'distance=0.05 unit=m') = 'TRUE'
        ORDER BY distdiff)
WHERE node_typ_d = 'IN_DUCT'
   AND ROWNUM < 2;Essentially we use sdo_nn to return all results (distance usually is 0) at the 5cm level. At first we though just this would work - then we found that in many cases it would we return multiple results all stating a distance of 0 (not true).
For those results we then use our own get_mbr_center function that returns the center point for each geometry, and basically compute a delta from the given x_in,y_in and that geometry.
Then we order the results by that delta.
The outer select then makes sure the row is of the correct type, and that we only get one result.
This works, and is fast (actually it is quicker than the original code).
Bryan

Posting Data Issue with IDOC Type : COND_A03

Friends,
I'm posting the data from Middleware(Message Broker) to SAP using the IDOC Type : COND_A03 with Message Type : COND_A.
For this IDOC,I'm populating the below Segment's data.
Segement :E1KOMG:
Fields:
KVEWE,KOTABNR,KAPPL ,KSCHL,VAKEY ,KONDA,MATNR .
Segement :E1KONH:
Fields:
KNUMH,DATAB,DATBI
Segement :E1KONP:
Fields:
KSCHL,STFKZ,KSTBM,KSTBW,KRECH ,KBETR,KONWA,KPEIN,KUMZA,KUMNE,MXWRT,GKWRT,ZAEHK_IND ,KBRUE,VALTG,
VALDT,ANZAUF,MIKBAS,MXKBAS,KOMXWRT,KLF_STG,KLF_KAL
Problem: In SAP, IDOC's are processing successfully with status 53 and updating the tables : KONH,KONP successfully.
But Table A957 which is passing against KOTABNR field is not pupulating with the Materials passing.
Can anyone please guide me why the Materials are not populating in the table : A957.
Regards,
Sreeram

Hi,
I guess there might be some issue with VAKEY population.
All the key fields in A957 should be concated properly while populating VAKEY. (Leading zeros must be prefixed to the material)
Regards,
Ganga

TIFF export date issue with 40D images

Hi.
I have a strange issue with Aperture 1.5.6, Leopard 10.5 and Canon 40D RAW images.
The problem is this:
1) Import a 40D RAW image in aperture.
2) The exif image date is 13.11.07 20:21:10.
3) Then edit the image in Adobe Photoshop CS3 (TIFF).
4) Now we have two version of the image: the original RAW file and a TIFF file.
5) Export the two images with aperture to JPEG files.
Now the exif date/time of the image exported (RAW) is 13.11.07 20:21:10 and that's correct.
The problem is that the time of the second image (TIFF) has exactly two more hour ( 13.11.07 22:21:10 ).
In aperture the date/time is correct for both the images.
Someone can please try to replicate this issue?

Thanks for your reply.
1. I select the photos from iPhoto - varied between 5 and 20 (ran different test)
2. Click on FILE
3. Select EXPORT
4. Under the FILE EXPORT tab I have tried all the various options with no success
5. KIND - I make sure they are JPEG files - I have tried the Original also which is actually JPEG files
6. JPEG QUALITY - I have tried all 4 options from LOW to MAX
7. SIZE - I tried all 4 size options from SMALL to FULL
8. FILE NAME - I use filename
9. Select EXPORT tab
10. I export to the thumbdrive and I chcek and they are on the thumbdrive
11. I also tried to EXPORT to the desktop and copy them to the thumbdrive
I click on the photos on the exported images I placed on the thumb drive and they come up fine on PREVIEW on my MAC. No prroblem with the images until I try to use them on the plasma. I go back and use images from iPhoto 06 that I did not call up with the "08" program and they work fine.
Hope that explains what I do. Thanks again

MacBook Pro 15 Mid 2009 - Mac OSX 10.10.2 - Any issues with video lagging/audio lagging?

Hello
Current OS and System details below. Have started to experience audio and video lagging when browsing (not effecting audio on music)
Have looked at some forums and it appears to be an issue with some later cards and Mac Book Pros
Any one else experiencing issues? and if so are they resolved? and if so by what manner were they resolved?

Since yo said "an issue with some later cards and Mac Book Pros" I would also post n the MacBook forum
MacBook Pro

Windows 7 on e9280t has issues with Realtek HD audio drivers

This is driving me crazy. My PC runs great, but there is obviously an issue with the drivers for Realtek and Win 7. Sometimes I have sound, sometimes I don't. You just never know. Most of the time it doesn't even register that I have speakers. I've tried downloaded the driver from the HP site. I've also tried downloading the driver from Realtek's site. Nothing has worked yet. Still no sound. Anyone have any clue what might be causing this, or if there is a fix in the works?
http://twitter.com/cthemenway

Try this. Right click on the Audio icon in the tray. Then, click Properties. This opens the 'Sounds and Audio Devices Properties'. Check all of the settings to assure they are correct. You may have to change the settings one at a time to see if one of them does the trick. When I have had a problem with the speakers not being recognized, it was incorrect speakers chosen.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Dates issue with BAPI_NETWORK_MAINTAIN

Dear Frens,
I have issue with dates in the activities and in the header of network while using BAPI_NETWORK_MAINTAIN. I am creating a new network with the deleted activities of an already
existing network. The network is being created with the activity early_start_Date and finsh dates as
sy-datum and the network header has early start dates set to sy-datum.
While passing values to the table parameter I_ACTIVITY of the BAPI , the dates are as available in the
existing network. But for unknown reason, The newly created network dates are with the today's date.
Can any one please let me know the possible reason for this.
Also every time I create a new network with multiple activities the new network is being created without first activity of the set of activities to be created.
Here also the table parameter I_ACTIVITY has all the activities that are to be created for new network.
I appreciate your quick response on this.
Regards
Priya

Hi Lakshmi,
I was able to solve the problem but not by the answer you gave. I had to write a WAIT up to 3 seconds after commit and that updated the table.Thanks anyways
Regards,
Dishant

Issue with NAS (Network audio system)

Hi people. I think i have very basic issue but i don't know his solve.
Im downloading and install NAS 1.9.4 and its ok.
But if I'm try to start server using cmd:
nasd -v
I get this output:
Network audio system Release 1.9.4
Init: Output open(/dev/dsp) failed: No such file or directory
Fatal server error:
could not create audio connection block info.
I know error. /dev/dsp location doesn't exist. But i don't know how to change audio device location in nasd.conf file.
Thanks for help and sorry for my English.
Ondrej Dvorak

You could use oss emulation that alsa-oss package comes with:
cat /etc/modules-load.d/50-oss-alsa-emulation.conf
#Alsa OSS Emulation
snd-pcm-oss
snd-mixer-oss
snd-seq-oss
That would create /dev/dsp. But looking at /etc/nasd.conf you could just change the output section device from /dev/dsp to /dev/snd/pcmC0D0p or similar and mixer to controlC0 or similar.

Data issues with the Rzzr

I recently bought the droid Razr and have had some issues. First off I seem to get a decent amount of data connection disconnects. Also when I live on Long Island and work in Manhattan. Where I live I only get 3g and the connection is slooooow. In Manhattan I get 4g and the connection varies from 12mbps to 32 mbps. 3g in my house I get around 0.67. Meanwhile my daughter has a droid X and is pulling 12mbps on 3g. **bleep** is up with that? Although something just dawned on me. It may be possible when I tested the connection she was connected to wifi. I'll have to recheck that. But I still have an ultra slow connect on the Razr with 3g and enough disconnects on my phone to drive me insane. Imagine when I try to watch a movie on HBO Go. Any insight? Thanks.

RobFurious wrote:
I recently bought the droid Razr and have had some issues. First off I seem to get a decent amount of data connection disconnects. Also when I live on Long Island and work in Manhattan. Where I live I only get 3g and the connection is slooooow. In Manhattan I get 4g and the connection varies from 12mbps to 32 mbps. 3g in my house I get around 0.67. Meanwhile my daughter has a droid X and is pulling 12mbps on 3g. **bleep** is up with that? Although something just dawned on me. It may be possible when I tested the connection she was connected to wifi. I'll have to recheck that. But I still have an ultra slow connect on the Razr with 3g and enough disconnects on my phone to drive me insane. Imagine when I try to watch a movie on HBO Go. Any insight? Thanks.
Hello to all community members! Thanks for engaging on this topic. RobFurious, I would like to help resolve your connectivity issues. I noticed that you haven't been back to the forum since posting this. I hope that you do return to become a part of this great forum, particularly to let us know if this matter was fixed. Please let me know if I can help at all. Thanks again!

Another date issue with E52

Hi,
I have a really annoying problem with Nokia E52. The date is not automatically update. When I wake up every morning, the date still remains yesterday, though time still runs well. I have to switch the phone off and then switch it on and only then the date is updated. I don't want to switch it off and on every morning like this.
I have checked the option Automatically update date and time already. I also update the software to the latest version but the problem hasn't been solved yet. Anyone can help me?
Thanks!

I am having same issue. But I solved it by selecting Automatic time update ON. So when I turn on E52 in the morning it still has old date but in second update it with right one from mobile network.
This bug is connected with 16GB card - when I remove it it works fine. Also if I have alarm pending than this bug is not present.
Check if your mobile provider support automatic time update.

N210-MD1GD3H/LP Issues with video and audio lag / stutter - can't find cause?

After much searching I'm now posting to a forum for the first time. #newbie
I have an 'old' PC (wait - don't ignore me yet...) and I thought that 'helping' it out with a low spec graphics card and a USB audio card would make everything nice for general web browsing and watching online content. The PC was bought second-hand (stay with me....!) with Windows 7 but I thought that the CPU was struggling as I was getting the video lag etc, so I re-installed XP SP3. Initially after install everything looked fine but a few days later and the troubles were back.
The issues I now have are very choppy / stutter / lag on watching things like YouTube and iplayer, and playing DVDs. At the moment there is no sound for the DVDs.
I don't know whether it is:
1. Video card / MOBO incompatibility.
2. Audio incompatibility (USB adapter vs video card vs onboard)
3. MOBO lacking power / processing speed.
4. another...
Any help would help. Thanks.
Specs:
Windows XP SP3 (recent fresh install)
Acer Aspire Desktop M1610
SiS chipset
Intel® Core 2 Duo 1.6Ghz
250W PSU
2GB DDRII RAM
PCI Express x 16 slot 1.1a (for MSI N210-MD1GD3H/LP card)
On board Audio Controller: Realtek ALC888S
USB audio card: Creative Sound Blaster X-Fi Surround 5.1 Pro USB Sound Card attached to two external PC speakers.
HP Pavilion 23xi monitor attached via HDMI to MSI card.
(hope that's sufficient)
Link to service manual acersupport.com/acerpanam/manuals/acer/0000/servicemanuals/S.G_AS_M1610_VT_M261.pdf

check if your VGA drivers is installed proplery and fuction without issues in device manager

XMP data issue with mixed up audio

Similar Messages

Maybe you are looking for