XMP file have Dream Weaver Logo

Hello,
I work on my pictures with Camera Raw on NEF raw files. I wanted to edit lots of pictures taken under same light conditions. Therefore I just edited one file. Normally I could for exemple open the next file say " load settings" and chose the XMP file of the picture I just edited.
But now, I get an error message saying the the XMP file has no data in it (but if I open it as text, there is a lot written there). I notice that the file has the logo DW (Dream Weaver). On my other computer, the file open per default with Mac Script. I tried to change this, but it doesnt work. I don't get the error message, but none of the according settings neither...
Is this a known issue?
What can I do?
I work on Mac OS X 10.8.5 and I am customer of Adobe Creative Cloud (I work with Photoshop CC6).
Thanks a lot in advance for your help and hints!!
Noukita

Similar Messages

Xmp files have become disassociated with image

My xmp files have become disassociated with my image in ACR cs5. Bridge shows thumbnail and xmp file side by side for any changes i make in ACR or in rating images theough bridge. I have searched for answers but coming up empty. Anyone?

If you are reffering to raw files, yes, this is as expected and designed. Raw files are considered Read Only files and the variouse metadata is therefore stored in the .xmp side car files. Metadata for TIFF, PSD & JPEG as well as DNG files can be safely embedded into the file so there is no need of a side car file.
Just be sure you keep the raw + .xmp files together and essentially treate them as one file.

What effects do XMP files have in CS, LR, and Elements (Organizer & Editor)?

I wonder what effects the .XMP files have on Photoshop applications. Should I keep them when working in the OS (WIN7) or chuck them? What effects would deleting XMP have?

THe XMP files contain all the edit information for any raw files you have. If you chuck them you will loose any edits you made.
If you do not want to see them in Bridge click View and uncheck show hidden files. They only use about 2 kb.

Dream Weaver CS 4 setup fails

Today I purchased a Dream Weaver CS 4 upgrade. I have Dream Weaver 8 which I bought from Adobe.com and I have Dream Weaver CS3 which I brought from Amazon.com.
The error message I get is setup cannot continue. There is no specific reason stated.
Both Dream Weaver 8 and Dream Weaver CS 3 runs fine.
Any ideas what could be wrong? Anyone?

Run the CS4 Clean Utility from the support pages. Have it unregister all older Adobe tools/ current tools. This wil lremove them from the installer database, but the programs themselves remain intact. In addition, manually uninstall Adobe AIR and associate applications such as Adobe Media Player. After that, install DW CS4.
Mylenium

Web browser is not displaying the right font style which I have chosen in Dream weaver

Hello frnds,
I am new to Dream weaver, I dont know much about dream weaver, I am just designing one for my personal use,
I have a problem with font.
I was downloading nice font style from website and I was using that in dream weaver, When I open the browser on the same computer where I have dreamweaver on, it is fine but when I try to open it with a different computer, I cant see my style font, instead of that I can see a different font, like a standard, or default font..
Some one please help me,,,

That is because the custom 'nice' font you're downloading to your computer is not available on other computers.
To overcome this problem, you should embed your font file as a 'Web Font' in your CSS.
You can use 'Google Webfonts API' to choose from one of many available fonts you can use through Google's CDN. Here's the link: http://www.google.com/webfonts
You have instructions on how to embed this to your webpage once you visit the URL mentioned above.
If you want to use your own Custom Font file, there may be a few limitations. You should ensure you are not violating a copyright by using a custom font on your website. Fonts have licenses too just like softwares. Some fonts can be used on the web. Others cant. You should read your font license document to find out if you can use the font on the web. Dont take this lightly. You may be getting yourself in big trouble if the font developer finds out you're using their font on your site without licensing them.
Once you're sure you're not going to be violating a copyright, visit http://www.fontsquirrel.com/fontface/generator and upload your 'nice' custom font there. Fontsquirrel will generate a 'webfont file' for this font and give it to you that you can download. Font squirrel will also give you instructions on how to use/ embed this code into your website for custom fonts to be visible.
Trust this helps.

I have Adove Reader XI. All my files have a picture as the first page. I used to be able to see the picture for each file. Now all I see is the PDF logo. How can I change this so I can see the pictures instead of the logo?

I have Adobe Reader XI. All my files have a picture on the first page. I used to be able to see that picture but now I can only see the PDF logo. How can I change that so I can see the pictures instead of the logo?

Windows 7

Why do I have XMP files in my iPhone pictures?

I have been an iPhone user for the past 3+ years. When I connect my iPhone via USB to my Windows PC I can open Windows Explorer and see what files are on my iPhone. Starting this month, I started seeing .XMP files in my pictures for the first time. The files show no images and all are 1.24 K in size.
Questions:
1) What are these .XMP files?
2) Why are they showing up on my iPhone all of a sudden?

Hi Comstock2544,
I had the same problem during the last year.
According to some experts, .XMP are metadata files, something called "sidecar" files: they contains information about some of your pictures (e.g.: date of capture), and must be inthe same path of them to work properly (although probably useless on our pc).
And... they aren't actually of Adobe: they are standardized widely.
In our case, they are created by iOS when you crop and modify some pics with th iPhone tool. They serve to store information about your editing, without lose information from the original pictures.
In facts, if you crop one of your pics and save it, when you come back to re-crop it, you can see that the rest of the image cropped is still there.
A friend friend was able to delete them (I had 3) just deleting them, but I'm still unable to do that with the new ones. Anyway, you can just ignore tham and it'll be fine.
P.S.: You can open them with the notepad to see what info they store.

Why do I all of a sudden have xmp files?

I'm using Lightroom 5.6. For the first time I'm noticing xmp files in my file folders next to my images and in LR I notice these images now have "Sidecar File" listed under File Name in the Library's Metadata box. For all the year I've used Lightroom I've never had xmp files? What is it? Do I need it? and what do I do with it? What if I move some files out of a folder and into a different location, so I always have to make sure I also move the xmp file with it?
Any help greatly appreciated.
Michele

Thank you for the link! I've read it and it kinda opens a whole new can of worms for me. So if I understand correctly the xmp file stores Metadata because a .CR2 file cannot store the metadata inside of it. And the storage of this information with the file is necessary if you make metadata changes in Lightroom, and then later want to open that file in a different program. So if I ever decide to reorganize some of my raw files in Mac's Finder folders than all I have to do is make sure I move the xmp file along with it? Not separate them? And then my other question is does the xmp file also store the changes I made in developer? Like the white balance, exposure, lens corrections, etc...?

HOw do I open XMP files I have light room 5 and photoshop elements 12?

How do I open XMP files??? windows 8, lightroom 5 and photshop elements 12...

You don't need to. As long as the XMP file is in the same folder as the corresponding image file, LR or Adobe Camera Raw will automatically read it and recognize your last completed edit when you open the file or go to Develop module (reads from catalog).

My Bridge CC has stopped functioning. Think it may have to do with lost XMP files

In a moment that I lost track, I deleted some XMP files from a large file of Photoshop CC files. Now Bridge doesn't open. What to do?
Amy_Wong@

You may get better help in Bridge General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

How do web site created with After Effect differ from that created with dream weaver or Flash?

As I have some experiance not much in After Effect..I have created my website in After Effect., I have no knowledge of Dream weaver or Flash.. My web pages take too much time to open., due to it loads SHOCK WAVE and it take much longer time., were as I see many a website created in other software opens prety fast. As such I want to know whether creating website in After effect is right or not., and how to speed up

You do not create websites in AE, you can create at best animations and that is what you ahev done - produce a fat SWF file. You are really using the wrong tool and should better spend your time on learning HTML and CSS proper and do your website in Dreamweaver or otehr web design tools. And no, Flash is not a website design tool, either.
Mylenium

Illustrator into Dream Weaver

So first of all this is my first time here and I am very sorry if I forget anything or do anything wrong. I looked for this question and was not able to find it. I would appreciate any help that anyone can offer. Here is some of the information
I am on Windows Vista Business
Dell Optiplex Gx745
Intel Core 2
Adobe Web Premium CS3
Here is my problem:
My company is always sending our marketing pieces to an outside company and I was hoping to take on this and make my position in the company a little more solid. When the latest piece needed to be made I volunteered to design it and I thought the best way to do so was through Illustrator. I put a lot of work into designing it and the company loves it. It came out great but now I need to make it functional. It is suppose to be sent out as an email and have a link in the email to our website that will have a sign up form. I cannot seem to figure this out. I can make it into a PDF and then ad a link in that but when I make it into a HTML the link does not work. I have tried to but it into Dream Weaver but it only comes across as an image (jpg) and to add a button I cant put it on top of the image. Please help me figure out how to make my Illustrator file into a html with active links.

Anthony,
A regular plain image (like a JPEG or GIF) can't actually have a clickable area, you can create clickable areas by placing the image into an html document and using either a hyper link on an image or an image map to make a link to the form.
There are several ways to get what you want. One possible solution is to export your design from illustrator using the Save for Web & Devices command. The two most common formats for web images are JPEG and GIF. The JPEG format works well for continuous tone images and the GIF format is superior for limited tone Then you can open Dreamweaver, Insert the image into a web page and use the image map tools to draw a rectangular hotspot around the area of the image you want to be clickable. When the hotspot is selected you can add the address you want it to link to to in the Property inspector at the bottom of the interface.

Change language in Dream weaver CS5

Hi,
How can i change language of Dream Weaver CS5 from German to English?

This is as easy as it gets. Sorry to disappoint, but you rather be glad it is actually there and it's not like in other programs where you cannot switch languages at all. For all intents and purposes, this is not meant to provide an all out solution for flexible language switching, it is merely a fallback measure when the user needs to use prefab projects from the web or follow tutorials as wel las providing a compatibility fix for some plug-ins and scripts thatr do weird things in foreign language environments. Your program is still tied to the serial number you bought it with and that ultimately dictates any language settings. This also means that you cannot enforce other languages other than English. Would be pointless, anyways - you would have to have the proper Asian installer in the first place to even get the specific language files on your system. Same for otehr languages - a US/ North America installer will never give you Italian or German, just US English, Canadian French and possibly Spanish.
Mylenium

PHP won't execute on Dream Weaver testing server

I have successfully installed an Apache server and MySQL using Xampp. Using Dream Weaver (CS5.5) I've created .php pages which (after setting up the site and testing server) successfully connect to a database. However, php code on those pages won't execute. The pages only display the text code when IE or Firefox links to http://localhost/filename.php. Following is the Apache log file entries for those failed attempts. [Tue Jul 17 08:20:03 2012] [notice] Child 2656: Starting thread to listen on port 443. [Tue Jul 17 08:20:03 2012] [notice] Child 2656: Starting thread to listen on port 443. [Tue Jul 17 08:20:03 2012] [notice] Child 2656: Starting thread to listen on port 80. [Tue Jul 17 08:20:03 2012] [notice] Child 2656: Starting thread to listen on port 80. [Tue Jul 17 10:38:28 2012] [error] [client ::1] script 'C:/Program Files/xampp/htdocs/phpinfo.php' not found or unable to stat [Tue Jul 17 10:51:25 2012] [error] [client ::1] script 'C:/Program Files/xampp/htdocs/phpinfo.php' not found or unable to stat I've run out of ideas about how to solve this. Anyone?

If PHP is running in other locations, then it's a configuration issue with the server whereby PHP is not allowed to run in the folder you have specified. I can tell you filenames and areas to look for, but I'm personally have never found the XAMPP installation to be the most intuitive when it comes to editing which is why I pointed you in their direction.
If you look in the httpd.conf file, you should see a DocumentRoot defined. Make sure that the site definition is within that document root. There should also be a Directory declaration ( <Directory "/path/to"> ) that should match the path of your DocumentRoot. It is possible to serve documents from different areas of your computer. Ususally this is done when you have things like phpMyAdmin above the root, so if you see multiple entries in there, some of which XAMPP installs itself, you should leave them alone and ask their support forum for help because they will know which entries the application puts in that you will not want to remove.

Dream Weaver CS 5.5 not showing Flash/Vimeo/JW player and other Flash content local

Hi,
I have just installed WebPremium CS 5.5 and when I look locally through XAMPP at a web site in any browser, no Vimeo/JW players or Flash content
are showed. Flash is installed!!! The rest of the site is visible.
Only in "Live View" I can see everything as normal in dream weaver CS 5.5, but not in any browser.
When I look at the same site local in DW CS4 all looks fine.
Have no clue how this is possible. All suggestions are much very appreciated!!
Thanks! David

Is XAMP configured to serve up SWF or FLV file formats correctly? Check your XAMP MIME-type settings.

XMP file have Dream Weaver Logo

Similar Messages

Maybe you are looking for