XMP metadata is lost while updating XMP using Exempi on linux

Hello, I'm using the library XMPFiles for Linux (Exempi) to update XMP metadata of a tiff file. As a result RichTiffIPTC Tag is being removed and Photoshop tag was changed (2 photoshop image resources are also being removed : IPTC metadata (ID=1028) and MD5 digest of the IPTC (ID=1061)).
I've checked the library sources and found the following code :
#if XMP_UNIXBuild
// ! Hack until the legacy-as-local issues are resolved for generic UNIX.
        iptc = 0;    // Strip IIM from the file.
        if ( tiff != 0 ) tiff->DeleteTag ( kTIFF_PrimaryIFD, kTIFF_IPTC );
        if ( psir != 0 ) {
            psir->DeleteImgRsrc ( kPSIR_IPTC );
            psir->DeleteImgRsrc ( kPSIR_IPTCDigest );
#endif 
Can anyone please explain the reason of such behavior?
  TIA,
Slava

John Nack on Adobe : Per-layer metadata comes to Photoshop
This was the article that made me think this might be possible.
There is also the preference to Create Markers From Metadata
["Metadata"]
          "CreateLayerMarkersFromFootageXMP" = 01
Which made me wonder if there is a way to create the metadata in the first place that made it something AE would read and automatically change to layer markers.
Any ideas?

Similar Messages

  • Unknown error while updating module use!

    I restarted XE with "/etc/init.d/oracle-xe stop /etc/init.d/oracle-xe start" and then see this error message in the terminal console. Every serveral minutes, the error "Unknown error while updating module use!" is echoed.
    Any advice?

    Look for the alert_xe.log file, maybe you'll find some additional information there if that message is related to your XE instance.
    C.

  • Data back up taken in 2.1 is lost while updating to 2.3

    It is compulsory to lose backup while upgrading from 2.1 to 2.3. Its really big big disappointing feature of the update. No care is taken by even google to restore sbf type back up by putting support software in market.
    I want to restore some of important sms back up. I need help from Sony Ericsson. I am sure that so many people have lost their back up while updating to 2.3.
    It is compulsory to put such a notice display while updating to 2.3 that you will loose the back up and will not be able to restore back of 2.1 in 2.3. I want to file a case against the company for the valuable data loss and for not to inform such an important data lose.
    Solved!
    Go to Solution.

    Hi, download the following apk file from link provided and install it to your phone, http://www.elita-clan.com/downloads/backup_and_restore_v010935.apk.
    Download it to PC/Laptop, then transfer it to phone SD Card. Make sure you have a File Manager app to search and install the apk file.

  • Error while updating data using session and call transaction method

    Hi all,
        i have to update data using MM01 transaction from flat file to database.i have used both session method and call transaction method to do that.in both the methods data has been transferred from internal tables to screens but while updating the data that is by clicking the ok-code at the end of the transaction iam getting a dialogue box stating
       SAP EXPRESS DOCUMENT "UPDATE WAS TERMINATED" RECEIVED FROM AUTHOR "SAP".
      please tell whether the problem lies and solution for that.
                                       thanks and regards.

    hi,
    check your recording.check whether u saved your material no in recording or not.
    once again record the transacton mm01.
           MATNR LIKE RMMG1-MATNR,
           MBRSH LIKE RMMG1-MBRSH,
           MTART LIKE RMMG1-MTART,
           MAKTX LIKE MAKT-MAKTX,
           MEINS LIKE MARA-MEINS,
           MATKL LIKE MARA-MATKL,
           BISMT LIKE MARA-BISMT,
           EXTWG LIKE MARA-EXTWG,
    these are the fields which u have to take in internal table.
    this is the record which i took in my flatfile.use filetype as asc and hasfieldseperator as 'X'.
    SUDHU-6     R     ROH     MATSUDHU     "     001     7890     AA
    i did the same.but i didn't get any error.

  • Error while updating database using jdbc receiver adapter

    Hi All,
    I am trying to update a single record using jdbc receiver adapter.
    This is my the message that is getting created..
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:Data xmlns:ns0="urn:Test">
    - <STATEMENT>
    - <TABLENAME ACTION="UPDATE_INSERT">
      <TABLE>ORDERS</TABLE>
    - <ACCESS>
      <OrderID>99999</OrderID>
      <CustomerID>VICTE</CustomerID>
      <EmployeeID>3</EmployeeID>
      <ShipAddress>VICTE</ShipAddress>
      </ACCESS>
    - <KEY>
      <OrderID compareOperation="EQ">99999</OrderID>
      <ShipAddress compareOperation="EQ">VICTE</ShipAddress>
      </KEY>
      </TABLENAME>
      </STATEMENT>
      </ns0:Data>
    But in Adapter Monitoring i am getting the following error..
    <i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ORDERS' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near 'VICTE'.</i>
    Regards,
    Rahul

    Rahul,
    > In this case i believe the interface has to be synch.
    > So what will the response message type be like..
    Not necessary. UPDATE can be asynch as well.
    Can you turn the trace on like pointed by Michal and then you can see the Query in the Audit Log of the adapter montioring. Try to execute the same query from your DB Client like TOAD and see what is the Syntax error you are getiing.!
    The problem looks like some field has some dataype / column name mismatch.
    Regards
    Bhavesh

  • Error while updating infotype using HINUINFO_UPDATE

    Hi All,
    While executing the program 'HINUINFO_UPDATE'
    i am getting an error 'No object identification permitted for infotype 0582, subtype LTA'.
    After the approval for LTA claim is done in ESS i have executed the program 'HINUINFO_UPDATE' to update he infotypes 15 and 582. Infotype 15 is getting created but while creating the infotype 582 system gives the above error message.
    In the detailed error log system gives the following message.
    "You attempted to access a data record with the object identification 1. However, according to the Customizing settings, object identifications cannot be used for subtype LTA of infotype 0582".
    Helpful answers will be rewarded .

    Solved by SAP

  • "Connection lost" while updating phone software in...

    Good day.
    I got a notification on the Suite that there is a phone update (v11.40) for my Nokia C2-01. I wanted to upgrade my phone's software so I decided to go on with it.
    The backup phase is good, but later it said "Connection lost" during the installation.
    I canceled the installation, and when I turned on my C2-01, it shows "Test mode" on the screen. So I switched it off. Luckily after a few minutes I tried to switch it on again and the phone goes back to normal.
    What should I do to avoid this situation from happening again? I'm using version 3.6 of the software and I hope this won't happen in version 3.7. Thank you.

    Can you tell me the OS of the PC that you are using? You can try this troubleshooting and see if it will work:
    In Windows 7 and Windows Vista the reason for failure may be caused by windows trying to download and install additional conflicting device drivers during the update process.
    To disable windows device installation for the duration of the Nokia Suite process do to following:
    Access "Control Panel" and select "System and Security", and from there select "System"
    Next select "Advanced System Settings" and then the "Hardware" tab, and select "Device Installation Settings"
    From "Device Installation Settings", choose "No, let me choose what to do" and next select "Never install driver software from windows update"
    Click "Save Changes"
    After this process please try to run the Nokia Suite process again. You may need to manually connect to your device again using Nokia Suite's "Add New Device".
    Remember to enable the windows device driver settings after successfull installation.

  • Error while updating Task using pa_project_pub.update_project API

    Hi All,
    I am using AMG APIs "pa_project_pub.update_project" for Task dates update . I am getting the  API Error message as : "For a shared structure or a Workplan structure, all tasks in the structure should be passed in correct hierarchy."
    Even though I am passing the Task information in the task_in_tbl_type  in correct order (Ex. For extending dates, Top Task first followed by Sub Task and vice-versa for the shortenings the dates).
    Still I am getting the Error. Request you to help me in resolving the error.
    Thanks,
    Atul

    Hi All,
    Thank you All.
    Actualy I was watching the thread and got no Reply.this enable me to search more for the cause and eventually for the solution.
    The Error "The flex field values you have entered are invalid" was because of DFF values only. I found this solution from API code only. It takes me to PA_PROJECTS_PVT where I Found the Error Code and then to flex field validation and then to Task utility Package.
    Actually when you are not passing any value for Attributes, It will take the Old values only. and If the old values fails to Validate, this issue may arise. Same was the cause in this case. For An attribute the Value Set was "Standard Date" and it was accepting "DD-MON-RRRR" from Front End, but keeping "DD-MON-RRRR HH:MI:SS" as a value in the Attribute. For Eg. 12-DEC-2012 will be stored as 12-DEC-2012 00:00:00. It was there for almost all the Tasks.
    And when it was passed internally to API, It was causing the Error that Value enterted are Invalid.
    I came to know only after running the Desc Flex Field Validate API, which PA_PROJECTS_PVT was using.
    Got the Solution and feel like sharing with you all.
    Thanks,
    Amit

  • Error Exception CX_HRPA_INVALID_PARAMETER  while updating IT0014 using FM

    Hello Experts,
    When i am updating IT0014 for Benefits Wage types with Amounts, i am getting the below Run-time Error .
    UNCAUGHT_EXCEPTION
    CX_HRPA_INVALID_PARAMETER
    Pl let me know, if any inputs.
    Thanks.
    Linga

    Hello Richard
    The exception is raised in method SET_FRAMEWORK of class CL_HRPA_MASTERDATA_FACTORY. Perhaps the SAP note mentioned in the coding (on ECC 6.0) may be useful:
    METHOD set_framework.
      IF a_is_initialized = true.
    *   This indicates some complex problem which often can be easily
    *   fixed. For details see NOTE 493984 (2003).
        RAISE EXCEPTION TYPE cx_hrpa_violated_precondition.  " line 6
      ELSE.
        CALL METHOD delayed_constructor
          EXPORTING
            read_infotype     = read_infotype
            masterdata_buffer = masterdata_buffer
            additional_buffer = additional_buffer
            legacy_mode       = legacy_mode.
      ENDIF.
    ENDMETHOD.
    Regards
      Uwe

  • Metadata is lost when updating photos from iphone to imac

    Hi! I just got a new iphone 4, and when I try to import photos from it, I see that all metadata is gone. I checked with iPhoto, Aperture and Adobe Bridge and I can only see the metadata in the photos directly imported from the iphone camera (no editing). If I use any app (Hipstamatic, Monochromia, etc.) the metada is gone, I cannot even see the camera that the photo was taken with... I checked the settings for the apps, and the setting are correct.
    I saw plenty of pictures taken/edited with these apps (on Flickr, etc) that still have metada.
    Does someone know how can I keep the metadata in all photos?
    Thanks!!

    Not what I wanted to hear but thanks for your quick response.  Do you know what the problem could have been?  Cheers

  • Connection lost while updating firmare - Crashed

    Hi,
    I own Nokia N95 8GB. I had the latest released version V30.0.018. My phone was very slow. I tried re-installing it once since I thought its because of too much of application installed.
    While software update was in progress, after 80-90% completion, my screen became white and the computer said, cannot find the phone. Tried all possibilities, and atlast had to disconnect the cable to try again.
    Now my phone does not boot at all.
    I removed the battery and waited for 20 minutes and tried hard-reset (green+star+3+powerbutton). I am getting only the white screen.
    Will my phone be restored? I am worried.
    Thanks,
    Benjamin Mark
    Solved!
    Go to Solution.

    No worries!
    It worked at last. It just requires little patience. Re-run NSU and be still. True, it will take long time, since your screen is blacked out. But after a hour or two, it will start progressing.
    And, it worked for me and its fixed.
    Nokia should re-work on such things in the coming version.
    Regards,
    Benjamin Mark

  • Connection lost while update new firmware for E71

    When I update new firmware for my E71 by OVI suite but after finished download and its step to prepare to install then it lost connection.
    I restart my phone for many times, then it allowed us to process for next, when i click next then suddenly its disconnect USB, when wait for a few minutes then its allowed process next.
    Mean that, its always disconnect USB when i click next to installing. please see attach file.
    Please help me, what happen with this installing new firmware?
    Thanks
    Attachments:
    lost connect.pdf ‏238 KB

    @lyjammy
    Not quite sure from your post whether E71 still functional upon previous firmware and just fails to update every time that you try; if that is the case it may be easier to find another PC.
    Happy to have helped forum with a Support Ratio = 42.5

  • Connection to phone lost while updating to v21.0.0...

    Hi guys, I have a small.. or somewhat major problem. Hopefully not the latter, but I'm being hopeful. Apologies if this has already been asked, I tried searching but couldn't find a direct answer.
    So after NSU downloaded all the required updates/etc, something happened, and my phone got d/c and stopped the update. This is using a WinXP computer/via USB.
    Nokia troubleshooter, suggest I remove the battery and switch the phone on and reattempt the update. However, when I turn the phone on, all it does is light up and remains blank. No Nokia logo, nothing.
    Help!
    Message Edited by michaels on 30-Apr-2008 04:56 PM

    Keep trying.It picks up.read the thread by Roberth on this.
    If my post has helped you please click the white star on the right

  • Can't use the camera function in my ipod touch 4s while updated to iOS 6.0

    I can't use the camera function in my ipod touch 4s while updated to iOS 6.0.
    There is all black screen when I turn on my camera. 
    I open the restriction setting already.
    thank you.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.

  • IPhone data lost during update using friend's pc.

    Hello
    My g/f has an iPhone 3G which she has used a lot for 18 months and had lots of saved texts and photo’s etc, but she is not very good at backups and has lost everything when upgrading from the original software, (about 2.6) to the current 4 something. Very unfortunately and unwisely, this was not even done on her own computer, but on a friend’s.
    She has her own desktop pc and uses iTunes but hardly ever connects the phone and always declines to update when she does connect. She last connected about 6 months ago.
    On New Years Eve we were at a friend’s house and a knowledgeable sounding guest offered to update her phone on her friend’s computer. They have their own iTunes account on it.
    We connected the phone up and it started updating via the iTunes program and after one or two hours the software and firmware update completed. The sync options were then presented and as the knowledgeable person had by then gone home we thought “Well, we don’t want to sync with anything on this computer, we will disconnect and sync later on g/f’s home computer.” (We are still not quite sure what syncing is although g/f thinks she has synced before from home)
    As you have guessed, the software upgraded fine but phone has been wiped of all data, pics, iTunes downloaded, texts, contacts, notes, calendars.
    The obvious problem in this case is that we used someone else’s pc. I have located the mobilesync backup folder on g/f’s own pc and it is empty.
    Is there any hope that we can retrieve anything from our friend’s pc which we updated on? Would a folder have been created separately on their pc for my g/f’s phone?
    I was not watching the pc the whole time it was updating and did not see everything that happened, but what I have established is that when I plugged her phone to her pc yesterday I got the warning message saying that the phone has been synced to another computer, (presumably the friend’s) and all data on the phone will be erased if I sync on this one (her one).
    What I don’t know is whether this warning message had come up on New Years Eve on the friend’s computer while updating, and whether it was ignored.
    We have been back to our friends but they are getting a bit fed up with us, I think they will put up with us using their pc one more time so this time we will have to know what we are doing. I have an external HD so I could maybe copy the iTune files from their pc and work on them from home later?
    With thanks

    Well.... I guess based on the replies, I should consider that password manager info not being part of the backup is normal for all of us.
    If not, maybe it's just one of these numerous glitches and bugs I have since I own a blackberry. 

Maybe you are looking for