XMP not loaidng correct profile for memory

When Turning on XMP mode for my ram, the listed memory spec'd timings and what it runs at using XMP does not match.
Here it shows the memory XMP profile correctly as spec'd for my RAM
Here it shows actual memory timings as set by the bios of my P55-GD65 with XMP enabled, mainly note the T1/T2 command rate... also the 88 to 41 although i am not sure those are pointing to the same thing.
I have the Voltage set manually to 1.65
Any insights here please

Quote from: Jack t.N. on 30-July-10, 23:09:28
CAS = 8
tRCD = 8
tRP = 8
tRAS = 24
tRFC = 88
tWR = 12
tWTR = 6
tRRD = 6
tRTP = 6
Please note that all of these timing values are actually set properly by the BIOS Setup!
The only thing that is really off is the command rate (set it to 2T manually).
You can ignore the tRC value. There is no setting for it anyway (which is not uncommon on Intel Chipset boards).
Thats what i needed to know!
Thanks much for the quick assist jack
take care
J

Similar Messages

Lens correction profile for the Canon 18-135 STM lens in Lightroom 5 ?

How or where can I get the lens correction profile for the Canon 18-135 STM lens in Lightroom 5 ? In effect he is not available in my list of correction lens so my lightroom is up to date apparently :/
Thanks in advance for answer.

There are two types of Lens profiles - raw and JPEG. It looks like you are trying to process a JPEG image and Adobe has only provided a raw lens profile for the 18-135mm IS STM lens.
You have four options:
1) Check for available lens profile using the Adobe Lens Profile Downloader. I checked and a JPEG lens profile is NOT available for the 18-135mm lens.
2) Follow the procedure outlined by Steve Sprengel in this post:
http://feedback.photoshop.com/photoshop_family/topics/lr_5_lens_profile_not_applied_for_jp g_captures_only_for_raw_captures
More detailed instructions here for a Pentax lens example:
http://www.pentaxforums.com/forums/post-processing-articles/176761-creating-adobe-lens-cor rection-profiles-jpgs-raw-ones.html
This allows using the available raw lens profile with JPEG images. To my knowledge Canon DSLR cameras do not apply distortion correction to JPEG images, so the raw profile should work well. You can check this by shooting raw+JPEG and comparing the two images inside LR
3) Create you own lens profile using the Adobe Lens Profile Creator. (A complicated process, but it can be done!).
4) Start shooting in raw mode or raw + JPEG mode, which will allow you to extract the most benefit from LR's processing controls.

Lightroom 4 Lens Corrections Profile for the new AF-S Nikon 80-400mm f/4.5-5.6G ED VR

When can we get a Lightroom 4 Lens Corrections Profile for the new AF-S Nikon 80-400mm f/4.5-5.6 G ED VR lens?

Based on the past - probably next version. If not, then the one after that.
PS - That is unofficial info, and may be wrong...

Lens correction profile for the Canon 18-135 STM lens?

How or where can I get the lens correction profile for the new Canon STM lenses?

I see that lens listed in the release notes for the final Lightroom 4.2 update that just came out a few hours ago, so it looks like the answer is to download the update.
http://blogs.adobe.com/lightroomjournal/2012/10/lightroom-4-2-now-available.html

Where can I find lens correction profiles for EF 17-35 f/2.8L lens using ACR 6.2?

Using Photoshop CS5 Extended on iMac 10.6.4.
I'm working with wedding photos shot by a friend but I cannot find lens correction profiles for Canon EOS 20D or the EF 17-35 f/2.8L lens. When I search online it simply says "No online profiles found". Is there a download for older lens profiles? I checked & I'm using ACR 6.2. I don't have the camera so there's no way to take test photos to create my own profile. But, shouldn't there be a profile available; the camera isn't that old?

Go to DXO Pro and download the 30 day trial. It works very well for lens/body correction, and unlike Adobe, DXO maintains data on the older cameras and lenses. Updates will always have those available. Adobe is a latecomer to this part of the correction process, so as Ian said, no call, no supplier? Out of luck.
http://www.dxo.com/intl/photo
It's fair to note that DXO does not necessarily have a complete line of everything, like my Tamron 28 to 75 isn't available as a module. They do pay attention to demands, or lack therof, that are not mainstream as well. But their offerings are excellent, and the tests, professional.

I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". Please help!!!

I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". At some point there was a mismatch between the profile on the iPad and the MAC server. The profile on the MAC server has been deleted and the iPad has been erased and reset to default. I need to be able to get Configurator to recognize this device to prepare it for deployment and issue Apps to it. Please help!!

Run the application 'Terminal.app' which you will find in '/Applications/Utilities' on your Macintosh.
Type this into it: defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
Hit the return key.
If you get no error message, it worked, and you can quit the app.

Is there a lens correction profile for Nikon D3100 18-55mm?

Is there a lens correction profile for Nikon D3100 18-55mm? I so don't know what I'm doing

The only profile I could see is a profile for the 18 - 55 mm for the D300.
As far as I know the sensor size is identical for the D3100 and D300, so you can use this this profile.
If the profile is not installed in the list of your Lr, you have to download it. In order to download it you have to download and install the Adobe lens profile installer first.
And before you can install the lens profile downloader, you need to download and install Adobe Air.
These two programs are for free and can be downloaded from Adobe's website.
Nothing is ever easy, is it?

Laptop says 'This version of iTunes has not been correctly localised for this language. Please run the English Version'. Can anyone help please, have no idea what to do and haven't used laptop in over a year. iPad/iPhone have lost tunes from laptop too.

my laptop will not open iTunes, as it just says 'This version of iTunes has not been correctly localised for this language. Please run the English version'. I have not synconised my iPhone 5S or iPad 2 with iTunes for well over a year. I noticed the music which had previously been put into iTunes has dissappeared from my phone and iPad. I also want to remove some movies from my iPad and iPhone and there is no way I can do this without being able to manually sync with the Laptop which is running windows 7. Has anyone else come across this and please can you help? I am no expert in fact I know very little about the Laptop, it is my Husbands baby but he doesn't understand anything to do with Apple including iTunes. I will need any advise explained step by step please.

Hi Shelady,
Try downloading and reinstalling the latest version of iTunes from the first link below. If that doesn't do it, the suggestions in the second article should resolve the installation issue.
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
-Jason

Stock Ledger Report in Day Wise not giving correct values for Opening Stock

Dear Experts,
I m working on Sock ledger report to give the day wise data.
since yesterdays closing Stock will become opening stock of today,
To get Opening Stock,
I have restricted the stock key figure with 2 variables on calday
                              (DATE FROM var with <=(Lessthan or equal to) and offset -1
                               DATE TO      var with <=(Lessthan or equal to) and offset -1)
To get Closing Stock,
I have restricted the Stock key figure with 2 variables on calday
                              (DATE FROM var with <=(Lessthan or equal to)
                               DATE TO      var with <=(Lessthan or equal to) )
But in the output Opening stock values are not coming correctly and for given range of dates,
for last date, opening stock is showing as Zero.
Could you please tell me how can I achieve the correct values for opening stock.
Thanks in advance.

Hi Arjun,
Seems like you are making it more complicated. What is your selection screen criteria?
Ideally you should only use the offset.
You will have say Calday in rows and stock in Column
____________Opening Stock_____________Closing Stock
01/06/2009___(Closing stock of 31/05/2009)_(Stock of 01/06/2009)
02/06/2009___(Closing stock of 01/06/2009)_(Stock of 02/06/2009)
03/06/2009___(Closing stock of 02/06/2009)_(Stock of 03/06/2009)
So, from above scenario, create one RKFs and include Calday in it. Create a replacement path variable on calday and apply the offset as -1.
So, your Opening Stock will be calculated by closign stock of previous day.
- Danny

ITunes will no longer download. It says it has not been correctly localized for this language, and to run the English version. How do I do that?

My iTunes will no longer download.
All of a sudden I get the message "This version of iTunes has not been correctly localized for this language. Please run the English version".
How do I fix this and run the English version again? .

Start by trying to repair iTunes from the programs and features control panel.
Otherwise, for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

After a system restore, I get an error message telling me that "This version of iTunes has not been correctly localized for this language. Please run the English version." the E

I did a system restore, trying to get rid of the new update (which I HATE), and now when I try to open iTunes, I get an error message telling me that "This version of iTunes has not been correctly localized for this language. Please run the English version." You can't change the language option unless you can open iTunes - and IT WON'T OPEN!!! What a piece of crap! If there existed an iTunes substitute, I would purchase it in a hot minute!

Strip it out and start again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you really want to roll back to 11.4 uninstall all iTunes/Apple components as described in the second box, restore the pre-upgrade version of the library as described in Empty/corrupt iTunes library after upgrade/crash, then download and install from one of these direct links:
iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
tt2

Why am I getting an error stating this version of iTunes has not been correctly localized for this language. Please run the English version when I just bought a song yesterday and had no problems

I have iTunes running on my Windows8 desktop for some while with no problems. Yesterday I purchased a song, deleted a free game app. and upgraded to the most current version of iTunes. This morning I could not pull up iTunes, so I retored my iTunes to a setting two (2) days ago. Now, as soon as I try to start iTunes I get a message stating: This version of iTunes has not been correctly localized for this language. Please run the Enclish version OK. So I hit the OK button and nothing happens. Please help.

Hi there GloriaNM,
You may want to try removing and reinstalling iTunes as an initial troubleshooting step. Take a look at the article below for more information.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
-Griff W.

Itunes player says it has not been correctly localized for this language, Please choose the English version. It has played fine up until today.

All of a sudden I can't play my itunes, everytime I click on the icon it comes up with an error message " This version of Itunes has not been correctly localized for this language. Please run the English version. There has never been a problem before. How can I choose a language when I can't even open the program? Thanks for any and all assistance!

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

MacAir - error message "This version of itunes has not been correctly localized for this language. Please run the english version" Saw other answers for windows users, I have a MacAir. never used any other language but English

Trying to open iTunes - get an error message saying "This version of itunes has not been correctly localized for this language. Please run the english version" Saw other answers for windows users, I have a MacAir. never used any other language but English so I have no clue what the problem is. I just want to update my phone and back it up.

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

I've tried to open itunes but just get error message saying this version of itunes has not been correctly localized for this language. Please run the english version

Looking for some help. I am trying to open itunes and I keep getting an error message saying "This version of itunes has not been correctly localized for this language. Please run the english version"
Can anyone help.

Hi there nisbetk,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
-Griff W.

XMP not loaidng correct profile for memory

Similar Messages

Maybe you are looking for