-Xmx Option (JDK 5.0 Windows AMD 64Bit)

I wanna try to test JDK 5.0(Release Candidate)
on Windows Server 2003 (CPU=AMD 64Bit)).
Q1.Do I have to use "java -d64" option?
Q2.How big can I set "java -Xmx" option？
Thank you,
kayafeg

Those are installation instructions. That file is a Windows installer. So once you have it in your system, then just like any other Windows application, you double-click it to run it.
It's obviously not referring to an icon on that page because you never double-click on things in web pages.
As for your main question, where do you get that download, I have no idea. Presumably you get it from some page which contains a link to this one, but that doesn't help. Perhaps going back to wherever you got the link to this page from in the first place, and looking around there, might help.

Similar Messages

Is there a version for amd 64bit on windows 7 ultimate

i am interested in knowing that if you provide a version of firefox on windows 7 ultimate with a amd 64bit? if you do how do i install this without losing my previous stuff from my 32bit version?

Development builds do exist for 64-bit Windows, however it is not yet considered a fully supported platform. Only nighties are available, which are for testing and not recommended for daily use. It's probably best to continue using 32-bit Firefox on all versions of Windows for now. It is planned to eventually release Win64 versions of Firefox.
Just (re-)installing any version of Firefox does not lose any of your data.

Windows 8 64bit not compatible w/ AMD Athlon 64 processor and/or ASUS A8N-SLI motherboard.

Why should I have to go through a plethora of troubleshooting techniques, then have to settle for using the Windows 8/ 32bit install CD, when I have a 64bit system? I think it's probably something in the Windows
8 /64bit code that causes it to fail install w/ AMD Athlon 64bit processor, and/or my ASUS A8N-SLI motherboard. After a lot of hassle I tried the Windows 8 /32bit CD and that seems to work fine. My real question is, why should I have to settle
for 32bit on a 64bit system?

I had the same experience trying to install Window 8 Pro 64bit (Build 9200) on an old XP SP3 32bit system, but I somehow got it working; the full story.
I had two XP Sp3 32 bit systems I wanted to upgrade to Window 8 Pro 64 bit (with the $40 upgrade deal available now). System#1 is: I7 920/Asus P6T deluxe/EVGA 560Ti/3GB/1 TB SATA 300 drive/1.44 Floppy/ 12X Bluray burner (pulled the old TV tuner card for
upgrade-incompatible). I ran the Windows 8 upgrade advisor - very few issues (TV Tuner card as mentioned and other software) - bought the upgrade. Downloaded the upgrade from my Win7Pro 64bit system to obtain the 64bit ISO (2.69GB) - burned to DVD. Installed
from DVD; no problems, finished in under 20 minutes - working great (really fast boot!).
System#2 is: Opteron 180/Asus A8N-E/EVGA 275GTX/2GB/1 TB SATA 300 drive/ 1.44 Floppy/ 16X DVD RW burner; the Windows 8 upgrade advisor - more incompatible software than system#1, but no incompatible hardware. I had read a number of blogs concerning the issues
others were having with the upgrade failing, so before I purchased, I thought I would run the 64bit install DVD I had (known to work on the other system) to see if it worked. I should note this system was not-in-use and thus I was not worried if the install
failed (I'd just be annoyed!). Ran the install from the DVD; initial splash screen - no spinning dots - waited 15 minutes (by which time no activity on DVD or hard drive) - failure. Rebooted - entered bios (1010) - tried many combinations of settings up to
disabling nearly everything (NVRAID, Legacy USB, Floppy, Audio97- all disabled / moved SATA into every slot (1-4) / tried SATA 150 and SATA 300 (SATA2, slots 3-4) - no change - failure X4 attempts. Now original XP3 installation is corrupted (GRRRR!) - I should
have imaged the drive BEFORE - oh well. Read more about others experience with this seemingly NForce board-related issue. Plan B - I will try install with an IDE (PATA) hard drive (80GB) - failure. Read more - some mention Window 8 installer not "liking" XP
partitions / disks (???); Plan C - Re-partition / format / check 80 GB IDE drive with WDTools - attempted Win8Pro install - failure. Dejected; last attempt before considering Win8Pro 32bit - Plan D - Re-partition / format / check 1 TB SATA 300 drive with SeaTools
(Barracuda 32GB buffer-7200rpm) - run Win8PRO 64bit install from DVD (build 9200) - success! Install took nearly an hour, with 3 reboots to the finish. Specifics (install configuration): 1 TB SATA drive in Slot 4 (SATA2), upgraded memory to 4GB Corsair PC3200
(4 slots filled), Two DVD drives on Primary IDE channel (master and slave), secondary IDE channel - no devices, bios (1010) - NVRAID, Audio97,1394 port,LAN -disabled; USB 2.0, USB Legacy, Floppy - enabled, IDE-Auto), TrendNet USB wireless adapter on USB slot
2 (motherboard), EVGA 275GTX in PCIe slot 1, no other cards. System seems to be performing well (fast boot times, no hangs), but as noted, no sound (I actually forgot to re-enable the Audio97 device in bios; it was 2am). I will see if I can get the Audio97
enabled today; my backup is to add a Turtle Beach Montego DDL PCI card (with the Windows7 64bit driver and run in compatiblity mode). Hope this saga might help some others out - good luck.

Itunes 10.2will not install amds on windows 7 64bit

I have spent the last two days on the Internet and apple support to try and install iTunes 10 64bit onto my new computer running windows 7 64bit.All I find on Apple support is about removeing and reinstalling not about amsd missing or not installing and uninstalling in a certain order and reinstalling, have done this more times than I care to say. iTunes 10 installs then rolls back and does not install the apple mobile device support msi.I have done everything suggested by support forums and everything requested by apple support and the final comment from them was if this doesn't work they don't know, not to great an answer.
I am now very frustrated and angry that a fault like this has not been solved by Apple, as I now have a new computer and a useless iTunes that will not sync my iPhone 4 or my iPod or my wife's iphone3gs or her iPod shuffle.
I don't know what to do now as my last resort I put the computer back to factory settings and it still did not work,sorry forgot to mention I extracted the apple mobile devise support .msi with winrar and tried to install it separately but still no luck,
does anyone out there have answer PLEASE PLEASE HELP ?

hi
i've been having the same problem. spoken to online support, they made appointment for genius bar, tech guy seemed to know his stuff but this issue was unknown to him. they agreed to give me a knew phone, eventually told me on day to when i returned that they had exhausted everything and that it was a pc software issue. possibly i should think about getting a mac or using another laptop! they also said that iphone works fine on mac but that there are som many versions of windows that it was difficult to keep up.
handing out replacement iphones and tech guys not know that there is a problem with windows 7 surely isn't good for business
apple support... can you address this problem asap please. i have restricted use and would like to get the full benefit of using my iphone 4
thanks
ps word of mouth is a powerful. the number of people who are concerned about updating to iphone is growing and i've not been able to recommend

Flash CS4 not working with Windows 7 64bit and Kaspersky Internet Security

I have a new i5 core computer running Windows 7 64bit retail. With Kaspersky Internet Security 2010 installed Flash CS4 becomes so unresponsive that it is completely unusable. Uninstall KIS and it works absolutely fine. I've already read on another forum that someone else is experiencing the same issue with the same combination of products. Is anyone else having this problem amd if so how did you solve it? I've posted on the Kaspersky forum with no solution thus far.
Does Norton work OK with Windows 7(64) and CS4?

*** PROBLEM SOLVED ***
Taxxem you are a star. Ideed turning off 'disable external service control' and disabling 'self defense' under 'settings -options' does indeed bring Flash back to life. Disabling self-defense had the most impact (and causes Kaspersky to grumble somewhat) but disabling external service control also had an impact, albeit much smaller. I'll post this solution against my Kaspersky forum post and hopefully they will do something about it.

HP Pavilion g6-2293sx: Windows 8 64bit CDs

Hi,
I purchased HP Pavilion g6-2293sx in May2013. It was shipped with Windows 8 64Bit. After a upgrade, I was unable to see the Battery status in status-bar.
This was really frustrating, as we live in are where frequent Power break-downs occur - almost 4-6 hours daily. So one need to aware of the battery status to prevent abrupt shutdown of notebook.
Anyways, I downgraded to Windows 7 and during this process I formatted the HardDisk so there is now, No Recovery Partition.
How I can get back to my Original Windows 8 (64Bit)? From where I can download Windows OS genuine for my Product?
This question was solved.
View Solution.

Sorry,but HP doesn't provide downloads of the HP Recovery partition or HP Recovery image due to licensing restrictions. Please use the HP Recovery Media, you created when you first setup your computer, to return the computer to a factory like state. If you didn't create your HP Recovery Media, please contact official HP Customer Support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer. Software may not be covered by the warranty and there may be a charge for the HP Recovery Media.
Alternatively, you can try this Windows 8 OEM download; http://www.google.com/url?sa=t&rct=j&q=en_windows_8_x64_dvd_915440.iso&source=web&cd=1&cad=rja&sqi=2...
This is an unofficial "official licensed copy of Windows 8 OEM." Download this file (you may have to try several time or repeatedly to successfully download this file) and burn the ISO image to a DVD. Set the BIOS to use UEFI, enable "Secure Boot" and disable "Legacy Support... if these options are present. Boot from this disk and install Windows 8. It should register as an official copy and use the key embedded in the BIOS. Please note that no HP customizations nor HP value-added will be installed using this method.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Will Apple release ITunes for Windows XP 64bit?

Will Apple release ITunes for Windows XP 64bit?

WARNING: This procedure involves moving, deleting, modifying, and copying system files and possibly sytem registry entries. If you make a mistake you can kill your system [I killed two of mine until I
figured out the problem with the outdated GEAR drivers]therefore:
1)Back up your entire system or better yet, get a cheapie new HD like Western digital 2 TB for $69-129 depending whether on sale or not and reinstall your system from scratch on the new drive. If
computer kraps out you just put the old drive back in.
2) Some of the procedures here may not be exactly what YOU see on YOUR specific model of computer. I've tried it on a COMPAQ sr1610nx with xp64, I've tried it on a Dell Alien with xp64, and on a
Gateway GM5442, and will now try from scratch to format harddrive, load xp64, device drivers, OS service packs and patches, AVG free, flash, java, and itunes.
3) I wrote these instructions down from memory. Read and understand entire procedure before you start. There is some troubleshooting you may need to do to make it work on your particular system. This
procedure works on 3 different models of 64 bit cpus. One CPU is an INTEL(Gateway), one CPU is an AMD X2 64-bit 4800+ Toledo(Compaq sr1610ns), and the other is an AMD x2 64-bit 3500+(DELL Alien). This
shows the capability exists on both Intel and AMD x64 architectures.
4) The current version 10.6.3 will work with modifications(including syncing ipod with ios5 and syncing cd and dvdrom ).
PROCEDURE: 1)Using you IE 64-bit browser download iTunes64Setup.exe from URL http://www.apple.com/iTunes/download/ to a new directory (For Example: ITUNES-1063-XPX64-TEST).
2) Using you IE 64-Bit browser download GEAR Drivers at URL http://www.gearsoftware.com/downloads.php?dir=updates/windows/drivers/&file=Driv er_Installer_x86_x64.exe.
3)Using your IE 64 browser download ORCA Editor at URL http://download.cnet.com/1770-20_4-0.html?query=Orca&tag=404&searchtype=download s .
4) Using your IE 64 browser download 7-Zip at URL http://download.cnet.com/1770-20_4-0.html?query=7-Zip&platformSelect=&tag=srch&s
earchtype=downloads&filterName=platform%3DWindows%2CMac%2CiOS%2CAndroid%2CWebwar e%2CMobile&filter=platform%3DWindows%2CMac%2CiOS%2CAndroid%2CWebware%2CMobile .
5)Use 7-Zip to extract Itunes64Setup.exe into sub components.
6)Use Orca to open and edit iTunes64.msi.
7)Change Launch Condition from VersionNT64>=600 to VersionNT64>=501. Change ((VersionNT=501 AND ServicePackLevel>=2) OR VersionNT>501) to ((VersionNT=501 AND ServicePackLevel>=2) OR VersionNT>=501)
8) Save and exit iTunes64.msi.
9) Use Orca to open and edit AppleMobileDeviceSupport64.msi.
10) Change Launch Condition from (VersionNT=501 And ServicePackLevel>=2) Or VersionNT>=600 to (VersionNT=501 And ServicePackLevel>=2) Or VersionNT>=501
11) Save and exit AppleMobileDeviceSupport64.msi.
12) Use Orca to open and edit AppleApplicationSupport64.msi.
13) Change Launch Condition from (VersionNT>=501 AND ServicePackLevel>=2) OR VersionNT>501 to (VersionNT>=501 AND ServicePackLevel>=2) OR VersionNT>=501
14) Save and exit AppleApplicationSupport64.msi.
15) Use Orca to open and edit Bonjour64.msi.
16) Change Launch Condition from (VersionNT>=501 AND ServicePackLevel>=2) OR VersionNT>501 to (VersionNT>=501 AND ServicePackLevel>=2) OR VersionNT>=501
18) Install itunes64.
19) Shutdown and Reboot.
20) Search your PC for GEAR*.*
21) Delete all the files found that are deleteable.This will get rid of the bogus Gear drivers (Version 2.2.0.1 from 2008 and 2009) that iTunes installs.
22) Run Gear drivers installer you downloaded earlier. This will load the correct Gear drivers (Version 2.2.2.0 [or 2.02.02.00- depending where you look in windows for the version number] from 2011 and
2012 drivers versus defective 2008 and 2009 drivers). The Gear driver connects the cdrom to itunes for sync. The usbappl driver connects the iPod to itunes for sync (Via the USB).
23) Ensure the file GEARAspiWDM.sys, usbaapl64.sys, also ksthunk.sys is in C:\Windows\system32\Drivers. If not search and locate these files. Then copy them to the correct directories Remember to set
your More advanced options to Search system folders, Search hidden files and folders, and search subfolders.
24) Now you must verify registry entry for UpperFilters exists and has GEARAspiWDM for value.
25) Go to Start, then Run, then enter regedit, then OK. Select HKEY_LOCAL_MACHINE, then SYSTEM, then CurrentControlSet, then Control, then Class, then {4D36E965-E325-11CE-BFC1-08002BE10318}, then
UpperFilters, right mouse click and select modify, then verify the Value data has the entry GEARAspiWDM. If not go back to {4D36E965-E325-11CE-BFC1-08002BE10318} and right mouse click select new, then
Multi-String Value, then name it UpperFilters, right mouse click and select modify and enter GEARAspiWDM for Value data, select OK and close registry.
26) Shutdown and reboot.
27) Now you need to update the cdrom/dvd driver and the USB driver.
28) Go to Start, then Control Panel, then System, then Hardware, then Device Manager, select DVD/CD-ROM drives, select Don't search. I will choose the driver to install, then select Next, ensure Show
compatible hardware is checked. Select CD-ROM as the driver, then Next, then Finish.
29) Shutdown and reboot.
30) Start computer, plug in iPod to USB, wait for windows to detect the device, probably detected as a camera. Go to Control Panel, then System, then Hardware, then Device Manager, and find the iPod.
31) Right mouse click and select Properties, then Driver.
32) Select Update Driver, then select Install from a specific location (Advanced), then Next, then select Don't search, I will choose the driver to install, then select Next, ensure Show compatible
hardware box is checked, select USB driver for iPod, then Next, then Finish.
33) Shutdown and Reboot.
34) Start iTunes. Ignore the message iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTUnes (This message comes from the device driver install failure for the
cdroms because the current Itunes installer still contains the bogus outdated Gear drivers). Select OK.
35) Now Itunes should work.

My iPhone 4 will no longer back up in iTunes after my upgrade to Windows 7 64bit.

I used to have Windows XP 32bit and everything worked fine.
I upgraded to Windows 7 64bit and installed iTunes 64bit (I've also tried running the installer as administrator [in the compatibility properties]).
iTunes will recognise it with no problems and I can drag and drop anything I want to the iPhone, but I can't back up.
Software versions: iTunes v10.4.0.80, iPhone 4.3.5.
When I try to back up, the loading bar with either:
Have a loading bar with diagonal lines forever or,
it will start moving and freeze.
I've tried leaving the process for hours, but to no avail.
While the back up is being attempted, iTunes still retains full functionality.
I would exit by sliding the bar on my iPhone (iTunes will retain the loading bars as if frozen) and then unplug it. At this point iTunes takes a few seconds to drop the loading bar altogether, and the little screen will reset to normal functionality.
I believe this may be a iTunes-Windows thing as I did the following with my old laptop (Windows XP 32bit):
Installed iTunes for the first time.
Went into preferences and disabled the automatic backup option.
Plugged in the iPhone, right-click "back up".
The back up took less than 5 minutes.
I don't understand why my main PC can't back up my iPhone.
Can anyone help please?
I've tried researching the same problems and I've ended up doing the following:
Reinstalling iTunes,
Tried changing the iTunes installation folder to "Program Files" instead of "Program Files (x86)",
Deleting all contents from: "C:\Users\[Username]\AppData\Roaming\Apple Computer\MobileSync\Backup",
Deleting the apps from my phone in case there are corrupt apps (doesn't make sense though as it backed up fine on my old laptop).
I would appreciate any suggestions!
Kind regards,
Will

Hi there,
I have the same issue. Usually hangs after 10K od sometimes after 18MB of backup file.
Config: iTunes 10.4., Win 7 64bit, iPhone 4 with iOS 4.3.3
I tried all of these without success:
- deleted backups via iTunes / Preferences
- deleted backups from sync folder
- created a new admin user and tried to sync
- reinstalled iTunes
- ran all Windows updates, restarted, reinstalled iTunes
- ran iTunes / Diagnostics (says everything okay, only info which is strange: diag says I am not a admin user, which is not correct)
Nothing helped. Who can help. I hope someone from Apple can take care, as I seem not to be the only one. Actually iTunes is the worst part about iPhone. Hope with iOS 5 and Cloud sync to get rid of iTunes.
Any hints welcome,
Cheers,
Miguel-KA

Install JMF on Windows 7 64bit

Dear all,
After a lot of struggling (and a really mean a lot), I finally got jmf to work on Windows 7 64bit. I figured that I can better not let this information go to waste, so that's why I'm posting it here. I didn't really test the full capabilities of jmf on my platform yet, in fact I only tested those features that I needed for my application. As such I am able to successfully capture and record video clips from my build in webcam of my laptop.
First let me describe my platform:
Laptop: Samsung R590 (JS01)
Processor: I5 450M (64bit)
OS: Windows 7 64bit
Webcam: build in
Secondly I want to apologize in advance if the method below doesn't work for you. The reason for that can be that I had to try so many different things before I finally got it to work, so I'm not really sure which steps are necessary and which ones are not. So I tried to make a guide that only includes the necessary steps, but in reality I tried so much more, so if this tutorial doesn't work for you, please give me feedback, and we'll try to figure it out. :)
Step one: installation of java JRE/JDK
JMF will never work on a 64bit JRE/JDK, plain and simple because JMF is too old and doesn't support a 64bit JRE/JDK. Thus your first step has to be to install a 32 bit JRE/JDK on your system. (I uninstalled my 64 bit JRE/JDK first, but I don't now whether or not this is necessary)
Step two: download JMF with windows performance pack
Go to the jmf site and download the most recent jmf version, with windows performance pack. (This is - and will probably be forever - version 2.1.1e)
The link to the website is currently: [https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=7372-jmf-2.1.1e-oth-JPR@CDS-CDS_Developer]
Step three: install JMF
Install the file you just downloaded in the normal way you would install any other program. But chose as installation path: "C:\JMF2.1.1e"
I think this is necessary because of the strict security policy in Windows 7, if you don't do this, I guess jmf won't be able to store capture device settings to your local hard drive. (But again, I'm not completely sure here, please verify this if possible)
After the installation, you don't have to do anything special to get jmf to work, so you don't manually have to set the JMFDIR, PATH and CLASSPATH (as is explained at the sun website), just skip those steps.
After the installation, reboot your pc.
Remark: I recommend you to install jmf as an administrator (but I don't now whether or not this is necessary). To do this, right click the installation file and select: "run as administrator'.
*Step four: register your capture devices*
First make sure that all your devices are working properly, I recommend you to use a program like Skype or something just to check whether your microphone is working or not.
Secondly, open jmfstudio, select 'file > preferences > capture devices', and press the button 'detect capture devices'. Normally you will have to wait for a couple of minutes now (because the determination of all the available video formats takes quite a while). Afterwards jmf should have found all of your devices, that usually looks something like this:
DirectSoundCapture
JavaSound audio capture
vfw:Microsoft WDM Image Capture (Win32):0
But this can vary according to your configuration off course. :)
*Step four: test your capture devices*
In jmfstudio, select 'file > capture' and select the video and audio combo and see if your webcam settings work. You should now be able to view and hear yourself.
*Step five: that's it, enjoy your jmf*
*Remarks:*
My development platform is currently netbeans 6.9.1 and I am able to write code, build it and run it with netbeans. I can also just run normal *.jar files
*Troubleshoot:*
If you get a dialog screen when starting your video capture device that looks like this: [http://www.alexandria.nu/ai/machine_vision/dual_cameras/SelectDevice.gif]
(With off course another name for the capture device), then that means that your capturing device is currently occupied by another program and you can't currently use it.
To solve this, make sure that no other application is using the webcam. For me even this was insufficient, but I managed to solve this by installing the latest drivers for my webcam from the manufacturing site of my laptop.
I sincerely hope this tutorial can be of any use for someone, feel free to give me comments/suggestions. And please post here if this works for you or not.
Greetings, Molly

Hi
sure I follow each of your steps, I uninstall all java verisones and installed a new java version 32-bit, I installed JMF in "C: \ JMF2.1.1e".
when all installing finished, works fine JMF only once, I do the tests, recognizes the device; shows the video, but when I close and open again JStudio don't works throws error, and therefore my apliación not working, always returns null the device

Can I use External Display on a Window 7 64bit 13" Macbook Pro Early 2010

I have a 23" LED LG Monitor , It has VGA Cable , RCA Cable and HDMI Plug (but no wire). I am asking now if whether I should need a VGA Cable or a RCA Cable or a HDMI cable. I know there's the Apple Mini DVI to VGA Adapter. Should I get that? And does window 7 64bit professional bootcamp support any external display? If not , is there another way to get it working.

You should be able to hook it right up just like if it was a "normal" Windows Laptop.
Windows would be the one to set it up with. Make sure you've updated Boot Camp.
You probably should use an "Apple Mini Display" port -to- HDMI adapter as that should give you more display options, etc. (I'm not sure how high the 13" can go on resolutions, HDMI or VGA may not matter?)
You MAY have to use a separate sound cable between the laptop and monitor as some HDMI -to- (whatever) adapters don't carry the sound signal via an "adapter".
The next choice would be a Mini Display port to VGA adapter.
You may want to also ask this question in the "Computing Hardware/MacBook Pro" area as they may have more info?
Hope this helps...

I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.

I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.
4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM
54e24e0e-dfc4-466b-a347-4bd95536773e03-Jan-1312:30 AM
22d351d2-6461-4f33-9fbd-6d31f769e73103-Jan-1312:30 AM
8a8da99b-335e-43bb-aa12-4634aa0b431003-Jan-1312:30 AM
a15bb095-aeb9-44e1-a79c-1a17cee207d503-Jan-1312:28 AM

None if these crash reports seem to have been send.
Do you have crash reports with a "bp-" prefix that were submitted and that show a crashing thread?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can use one of these to start Firefox in <u>Safe mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes

Lenovo D20, Type 4155-21G With 5x1.5tb Raid 5, Windows 7 64bit install problem.

H
Id like to just document a current machine and works and see if any thing is glaringly wrong..
Above spec machine has an onboard marrvel 66xx raid card, a raid 5 volume has been created, total useable space is around 5.5TB.
The software in play here is the following..
Orignal Lenovo recovery disk set, this is Rescue and recovery boot disk 1, then the OS which is Vista 32 Business, the disk label is actual 64bit but its not 64bit its 32bit.
The machine finally has to leave with Windows 7 64bit ultimate.
I have looked into the upgrade paths and so on and basicly you need vista 64bit ultimate in theory, certain hacks are possible such as renaming the os level or name via the registery, but this is dirverting from my post.
Here is what has been done and what has happend.
20th Jan.
Start of day.
Raid 5 volume created.
Factory recovery completed windows vista business 32bit.
Attempt to upgrade Windows vista business to Windows 7 ultimate from with in windows, windows 7 alerts this is not a compatable system etc.
At this stage since the 64bit upgrade is not possible from the known good lenovo state (lenovo vista business factory desktop etc) the second disks in the "Windows 7 32bit + 64bit any time upgrade package was ran.
The 32bit version of the Windows 7 ultimate was ran, this did complete sucessfully.
The 64bit version of the windows 7 was attempted once more from with in the newly installed Windows 7 32 bit but again this upgrade route is not supported.
At this stage a custom install was completed (which means a fresh install which wipes the drive) / fresh install, of the windows 7 64bit any time upgrade disk.
For some reason the Windows 7 64bit any time upgrade key failed to be accepted.
At this stage a second engineer repeated all steps completed to verify and on the second go around the FRESH install of Windows 64bit any time upgrade (stand alone install / custom etc) the key worked!..
This is were it gets interesting.
Lets recap, we have a D20 with 5x1.5tb sata hard drives in raid 5, all on the onboard marvel raid card.
Windows 7 64bit has been sucessfully installed, and of course the next step is to install the lenovo system update tool. (version for windows 7, I understand this is fully 64bit compatable..)
This was completed and pc doctor and one other misc application install, the system requested to restart and then ....
The raid BIOS of the marvel card reported that the raid had become degraded..!!
An inspection of the onboard raid information results that the disk 0 of the 5 disks, was no longer assigned to the RAID 5, with teh remaining several disks still "assigned".
At this stage the only option is to delete the raid five array and recreate it.
This has been done and the factory recovery process has once again been restarted and an attempt will be made to perform the custom install with hopefully the windows 7 64bit any time upgrade install detecting the previous version although I would say that it would not need to detect anything since this is now longer an upgrade but a custom fresh install.
Further information.
There is a System bios update from the 5th of Jan 2010, this has been burnt to cd and will be applyed against the machine shortly.
We have had some conversation about just how it is that a disk can fatally pop out from the raid five volume like this, was it a coincidence that it coninsided with the power cycle process dirrectly after the system update installation?
Tommorow a Windows 64bit OEM package will be applied against this machine and since we have the relivant driver file for the onboard raid card (sourced from the drivers and applications lenovo recovery disk set), there should be less of a problem in key acceptance.
Kind of a werid situation, what looks like a possible hardware problem and a stupid microsoft upgrade qulification problem.
Is there any thing stupid I have over looked?
Thanks, sorry for the long post but this is the story in full.
Note from Moderator: Fixed formatting issue.

21st Jan..
The D20 has sucessfully had vista business factory reinstalled and then Windows 7 64bit installed.
Dirrectly after the Windows 7 installation and power cycle, one of the five 1.5tb hard drives have dropped out of the raid, visable as "DEGRADED", uppon further inspection via control m, the middle drive (not drive 0 as before) drive 2 (0,1,2,3,4,5) has dropped out and is not marked as assigned, it is marked with no label or free.
This is high strangeness, it is my understanding that the RAID technologies are transparent to the OS so it should not be in any way the Windows 7 install triggering this, the last occurance was also during a Windows 7 power cycle but dirrectly after the system update tool being installed.
At this stage it would appear that Windows 7 64-bit used in conjunction with the supplment driver disk marked as (drivers and apps, windows xp vista, windows 7) is not able to complete and remain stable.
I suspect a possible driver issue but if this was the case surely the windows 7 install would not progress past the first installation point where the driver disks is required to actually use and see the array via the controler.
I will update this thread with more information as it becomes available.
Machine delivery eta to customer is tommorow so this is not good.

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
I sure would like to decide about that myself.
Thanks in advance if this will be changed.

singmk wrote:
Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
Would like to hope there is some way to have control over this. Can someone help?
Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

Windows 7 64bits Installing Internet Explorer 11 ERROR Neutral package installation failed

Hi,
The laptop is running Windows 7 64bits with Internet Explorer 10 and the Windows automatic updates is turned on. The problem happens when the Windows keeps installing the Internet Explorer 11 every time between shutdown process. So I decided to download
IE11 offline installation and try to install from it but the problem doesn't solve, the installation still does not complete. I have tried to delete all files in the Windows temp folder and IE temp folder already but the problem still exist.
Below is the details from IE11_main.log file
00:00.000:
====================================================================
00:00.000: Started: 2014/05/26 (Y/M/D) 11:00:44.473 (local)
00:00.000: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.016: Command line: "C:\Users\TBG\Desktop\IE11-Windows6.1-x64-en-us.exe"
00:00.016: INFO:    Setup installer for Internet Explorer: 11.0.9600.16428
00:00.016: INFO:    Previous version of Internet Explorer: 10.0.9200.16866
00:00.016: INFO:    Checking if iexplore.exe's current version is between 11.0.9600.0...
00:00.016: INFO:    ...and 11.1.0.0...
00:00.016: INFO:    Maximum version on which to run IEAK branding is: 11.1.0.0...
00:00.016: INFO:    iexplore.exe version check success. Install can proceed.
00:00.016: INFO:    Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.016: INFO:    Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.016: INFO:    Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.016: INFO:    Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
00:00.702: INFO:    Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.702: INFO:    Extracted Spelling dictionary for en to C:\Windows\TEMP\IE18CE4.tmp\Spelling_en.msu.
00:00.702: INFO:    Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:00.702: INFO:    Extracted Hyphenation dictionary for en to
C:\Windows\TEMP\IE18CE4.tmp\Hyphenation_en.msu.
00:00.718: INFO:    Trying to extract ID: 7128 (1033) as "IE11-support.cab"
00:01.607: INFO:    PauseOrResumeAUThread: Successfully paused Automatic Updates.
00:02.714: INFO:    Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded
and extracted for use.
00:02.730: INFO:    Launched program to check hardware: "C:\Windows\TEMP\IE18CE4.tmp\IE11-
SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE18CE4.tmp\IE11-support\HardwareBlockingList.xml"
00:02.870: INFO:    Graphics Device Information: Intel(R) HD Graphics Family
00:02.870: INFO:    Hardware support check succeeded. Installation will continue.
00:02.870: INFO:    Windows 7 operating system detected.
00:02.886: INFO:    Service pack major: 1
00:02.886: INFO:    Service pack minor: 0
00:02.886: INFO:    Service pack name: Service Pack 1
00:02.886: INFO:    Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.2.9200.16570 >=
6.2.9200.16570 (True)
00:02.886: INFO:    Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll:
6.2.9200.16492 >= 6.2.9200.16426 (True)
00:02.886: INFO:    Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18409 >=
6.1.7601.17727 (True)
00:02.902: INFO:    Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll:
6.1.7601.18229 >= 6.1.7601.17617 (True)
00:02.902: INFO:    Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >=
6.1.7601.17888 (True)
00:02.902: INFO:    Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:02.902: INFO:    Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >=
6.1.7601.18010 (True)
00:02.902: INFO:    Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18254 >=
6.1.7601.18254 (True)
00:02.917: INFO:    Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >=
6.1.7601.18247 (True)
00:07.597: INFO:    Waiting for 0 prerequisite downloads.
01:37.423: INFO:    The neutral pack was successfully downloaded from the internet. Installation will continue using
the downloaded package.
01:37.423: INFO:    Waiting for 0 language pack downloads.
01:37.423: INFO:    Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
01:37.438: INFO:    No reboot logic message NrApiStart(0), lParam=0x03771068 returned 0x00000000.
01:38.000: INFO:    No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
01:38.000: INFO:    No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
01:38.000: INFO:    Installing with the downloaded package. C:\Windows\TEMP\IE18CE4.tmp\IE11-
neutral.Downloaded.cab
01:38.000: INFO:    Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package
/packagepath:C:\Windows\TEMP\IE18CE4.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
02:20.619: INFO:    Process exit code 0x80004005 (-2147467259) [Unspecified error ]
02:20.713: ERROR:   Neutral package installation failed (exit code = 0x80004005 (2147500037)).
02:20.729: INFO:    No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
02:20.744: INFO:    No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
02:20.775: INFO:    No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
02:20.869: INFO:    Waiting for Active Setup to complete.
02:20.963: INFO:    PauseOrResumeAUThread: Successfully resumed Automatic Updates.
02:32.694: INFO:    Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
02:32.741: INFO:    Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
02:32.756: INFO:    SQM Upload returned 403
02:36.453: INFO:    Cleaning up temporary files in: C:\Windows\TEMP\IE18CE4.tmp
02:36.531: INFO:    Unable to remove directory C:\Windows\TEMP\IE18CE4.tmp, marking for deletion on reboot.
02:36.531: INFO:    Released Internet Explorer Installer Mutex
Taweesak Archawamaitreekool

DISM.log would make this clearer. And using ProcMon I suspect would really make it snap out at you.   <eg>
C.f. (credit for a recent discovery)
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/i-get-error-9c59-when-updating-internet-explorer/03d4473a-867b-44a5-9a37-913e9a5879cf?page=8&msgId=afe85da0-36e0-4160-860b-d2973e78c8b9
Unfortunately, since then others have quickly stuck a pin in this balloon, finding that it is just one more bump in the road, but at least working around this coding error should change your symptom.
Good luck
Robert Aldwinckle
Thank you very much.
I have tried to create a symbolic link as suggested on a forum but the problem still cannot be solved. The error message from IE11_main.log file is exactly the same as before.
For DISM.Log, here are the details from the started time of the installtion process
2014-05-29 16:53:55, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
2014-05-29 16:53:55, Info                  DISM   DISM.EXE:
2014-05-29 16:53:55, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2014-05-29 16:53:55, Info                  DISM   DISM.EXE: Executing command line: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab
/quiet /norestart
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Manager: PID=9144 Successfully loaded the ImageSession at "C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583"
- CDISMManager::LoadImageSession
2014-05-29 16:53:58, Info                  DISM   DISM Image Session: PID=8324 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info                  DISM   DISM OS Provider: PID=8324 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM OS Provider: PID=8324 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Warning               DISM   DISM Provider Store: PID=8324 Failed to Load the provider: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll.
- CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Manager: PID=9144 Image session successfully loaded from the temporary location: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583
- CDISMManager::CreateImageSession
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:58, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:58, Info                  DISM   DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:58, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
2014-05-29 16:53:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 CBS is being initialized for online use. More information about CBS actions can be
located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info                  DISM   DISM OS Provider: PID=8324 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
2014-05-29 16:53:59, Info                  DISM   DISM Driver Manager: PID=8324 Further logs for driver related operations can be found in the target operating system
at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
2014-05-29 16:53:59, Info                  DISM   DISM Transmog Provider: PID=8324 Current image session is [ONLINE] - CTransmogManager::GetMode
2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Encountered the option "packagepath" with value "C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab"
- CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Package Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~11.2.9600.16428
with CBS state 4(CbsInstallStateStaged) being mapped to dism state 3(DISM_INSTALL_STATE_STAGED) - CDISMPackage::LogInstallStateMapping
2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Initiating Changes on Package with values: 4, 7 - CDISMPackage::Internal_ChangePackageState
2014-05-29 16:54:00, Info                  DISM   PID=4640 Scratch directory set to 'C:\Users\TBG\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-05-29 16:54:00, Info                  DISM   PID=4640 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Manager: PID=4640 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Executing command line: c:\windows\sysnative\dism.exe
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. -
CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: WimManager
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Getting the help information collection for the provider: WimManager.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Registering information from the help collection from provider: WimManager.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(wimcommands) and category(localtoplevelhelp) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(cleanup-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(remount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(mount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(unmount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(commit-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(get-wiminfo) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(get-mountedwiminfo) and category(wimcommands) for the
provider(WimManager).
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Getting the help information collection for the provider: Compatibility Manager.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
2014-05-29 16:54:00, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
Taweesak Archawamaitreekool

Help setting up my new IPod Touch on iTunes on windows 7 64bit

Hello there,
I need help setting up my new IPod Touch to my Itunes 10 application on a PC running windows 7 64bit. I have watched the tutorial on how to do it but what the tutorial says it is supposed to do is not what is happenning for me:
1. In the tutorial it tells you to connect your ipod to your computer, then, (if it is for the first time) when the ipod appears and is selected, a window will come up allowing you to name your ipod, and begin selecting the options you wish to use.
I did as instructed but quickly came against some technical issues.
My issues:
1-1: When I selected the new iPod Touch for the dirst time I got an error message.
A) This was quickly fixed once I calld up apple support on the phone (turns out an IE browser setting was blocking it.)
1-2: With that fixed I selected my iPod Touch again but instead of the window indicated by the tutorial, I instead got an iPod registration form window.
1-3: I filled out the form and pressed the submit button (thinking everything was fine), then a new window came up that looks like this:
Free Find My iPhone
Free Find My iPad
Free Find My iPod touch
Set up Find My iPhone for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPad or iPod touch.Set up Find My iPad for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPod touch.Set up Find My iPod touch for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPad. _Learn More_
_Set up Find My iPhone_
_Not Now_ _Set up Find My iPad_
_Set up Find My iPod touch_
Find My iPhone (or iPad or iPod touch) enables you to locate your iPad with Wi-Fi or iPod touch only when it is on and connected to a registered Wi-Fi network. Find My iPhone is not available in all countries. "
The first three lines and the first paragraph are indented as if there should be some type of graphic there, but it is missing. The underlined words indicate that they are supposed to be links, but they don't go anywhere, they are broken!
Now wheenever I connect my iPod Touch and select it the above window comes up and nomatter what I try it will not move or change.
Please help!
MSRankin

Try setting up the device in a new user account. or visit register.apple.com and verify your device is registered

-Xmx Option (JDK 5.0 Windows AMD 64Bit)

Similar Messages

Maybe you are looking for