Xntpd daemon error

I have a Sun Fire 4800 machine which has two domains running on two CPU boards. Last Friday, I rebooted domain A at around 10:41. After the reboot, we found the system clock of domain B was changed and got the following error message.
Jan 25 14:12:15 DomainB xntpd[452]: [ID 261039 daemon.error] time error -11431.990279 is way too large (set clock manually)
And we also found the clock of Domain A was also changed before the system reboot.
Here is the last log.
reboot system boot Fri Jan 25 14:03
root console Fri Jan 25 13:58 - 13:59 (00:00)
There is no NTP service running on Domain B. We don't know why it got an xntpd error message and set the system time to 14:12.

Thanks Darren.
I can confirm the xntpd was running before the daemon error, as we find a xntpd.cluster startup script in /etc/init.d which is using ntp.conf.cluster as the config file.
As the system clock suddenly changed to t+11431.990279s, the xntpd dump this daemon error message and then exit.
Now, I can focus on the clock jump issue. In domain A and B, we got the same issue at the same time.
At around 10:41 domain A changed to t+11431.990279s and B changed to t+(~11431s)
In the same day, at around 16:45, domain A changed to t-(~ 11431s) and B also changed to t-(~11431s)
We didn't work on domain B in that day. We only changed the /etc/system file in domain A, rebooted it and installed a database.

Similar Messages

Rsh[3088]: [ID 365563 daemon.error] can't get stderr port in /var/adm/mes..

Hi,
We are using Solaris 9 in our SF6900 cluster. On one of the node we are getting below continuous flow of messages. Please let me know what does these messages means and how to clear them.
root@l7n2> tail -f /var/adm/messages
Aug 8 09:09:34 l7n2 rsh[3071]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3075]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3077]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3078]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3082]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3084]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3085]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3086]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3087]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3088]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
^C
Thanks.

Hi Tom,
     Thanks, but at this point, I've rebooted, checked and double-checked more times than I'd care to count...:(
     Since I can see the NMEA strings when the GPS module is hooked-up to the USB port, I guess I'll assume there's some reason why the
     AMA0 UART has not been released, or that the GPS receives some different signals through the TTY that it's not seeing through the AMA0.
      As I mentioned, when I use 'cat /dev/ttyAMA0', it just hangs, like it's getting no data. I'll keep looking...
     Thanks for your help,
          Dave

Daemon error in solaris 11

Hi guys,
thanks for helping out with this. I am running solaris 11 on a T2000 server.
When I powered on the system, I received this error
2013-08-21T01:28:54-04:00 solaris11 in.ndpd[991]: [ID 302683 daemon.error] incoming_ra: SIOCSLIFLNKINFO (interface net0): Invalid argument
Please can someone help explain what this is and how i can fixed it?
I will really appreciate it.
Thank you
Arrey

988801 wrote:
Thanks for pointing that out to me. I appreciate it. I am have taking the other post down already.
Thanks though. Let me take this opportunity to ask you this;
Is there any material for troubleshooting solaris 11? I am just starting out, so it really gets confusing.
Thank you
I have no idea.
I have no recent hands-on familiarity with that sort of error.
You will need to wait and hope that others reply to any of your forum posts.
A quick Google search on "incoming_ra: SIOCSLIFLNKINFO" shows only three search results.
It shows your two forum posts and an old README of a build update from 2009 that mentions bug fixes in the old OpenIndiana project. If that's any indication, then it may be a simple patch issue.
Again, wait and hope that others choose to respond.

Cluster.CCR: [ID 544775 daemon.error] libpnm system error: read error

Hi all,
I have 2 V880 server with Solaris 9 with Sun cluster 3.1 with 2 nodes. I am getting the "Cluster.CCR: [ID 544775 daemon.error] libpnm system error: read error" error in one cluster node and the same tine i am getting
"Jun 11 11:13:56 server1 Cluster.PNM: [ID 517036 daemon.notice] connection from outside the cluster - rejected.*
Jun 11 11:14:06 server1 Cluster.CCR: [ID 988885 daemon.error] libpnm error: no LOGICAL PERNODE IP for clusternode2-priv.i,"
error in the first cluster node.
Please see the log andd give log
Jun 11 11:24:12 dbserver2 Cluster.CCR: [ID 544775 daemon.error] libpnm system error: read error.
Jun 11 11:13:56 dbserver1 Cluster.PNM: [ID 517036 daemon.notice] connection from outside the cluster - rejected.*
Jun 11 11:14:06 dbserver1 Cluster.CCR: [ID 988885 daemon.error] libpnm error: no LOGICAL PERNODE IP for clusternode2-priv.i,

Hi Tim.Read ,
I am mentioning the details of the cluster,
SUN Cluster 3.1 with 2 nodes, and Solaris 9 and SUN fire V890 Server.
It is configured recently including OS and everything like a fresh installation, but not done any changes after that. After the configuration i am getting this error but i am not facing any other issues with cluster. Please find the scstat out put and please give a solution, thanks in advance ,
root@server1 # scstat -q
-- Quorum Summary --
Quorum votes possible: 3
Quorum votes needed: 2
Quorum votes present: 3
-- Quorum Votes by Node --
Node Name Present Possible Status
Node votes: server2 1 1 Online
Node votes: server1 1 1 Online
-- Quorum Votes by Device --
Device Name Present Possible Status
Device votes: /dev/did/rdsk/d12s2 1 1 Online
root@server1 # scstat
-- Cluster Nodes --
Node name Status
Cluster node: server2 Online
Cluster node: server1 Online
-- Cluster Transport Paths --
Endpoint Endpoint Status
Transport path: server2:ce4 server1:ce4 Path online
Transport path: server2:ce2 server1:ce2 Path online
-- Quorum Summary --
Quorum votes possible: 3
Quorum votes needed: 2
Quorum votes present: 3
-- Quorum Votes by Node --
Node Name Present Possible Status
Node votes: server2 1 1 Online
Node votes: server1 1 1 Online
-- Quorum Votes by Device --
Device Name Present Possible Status
Device votes: /dev/did/rdsk/d12s2 1 1 Online
-- Device Group Servers --
Device Group Primary Secondary
Device group servers: dsk/d12 - -
Device group servers: rmt/3 - -
Device group servers: rmt/2 - -
Device group servers: rmt/1 - -
Device group servers: rmt/6 - -
Device group servers: rmt/5 - -
Device group servers: rmt/4 - -
Device group servers: rmt/7 - -
Device group servers: rmt/8 - -
Device group servers: ora-newds server1 server2
-- Device Group Status --
Device Group Status
Device group status: dsk/d12 Offline
Device group status: rmt/3 Offline
Device group status: rmt/2 Offline
Device group status: rmt/1 Offline
Device group status: rmt/6 Offline
Device group status: rmt/5 Offline
Device group status: rmt/4 Offline
Device group status: rmt/7 Offline
Device group status: rmt/8 Offline
Device group status: ora-newds Online
-- Multi-owner Device Groups --
Device Group Online Status
-- Resource Groups and Resources --
Group Name Resources
Resources: ClusterIp -
Resources: MountPoint Mounts
Resources: rman rmanb_fs
-- Resource Groups --
Group Name Node Name State
Group: ClusterIp server1 Online
Group: ClusterIp server2 Offline
Group: MountPoint server2 Offline
Group: MountPoint server1 Online
Group: rman server2 Offline
Group: rman server1 Online
-- Resources --
Resource Name Node Name State Status Message
Resource: Mounts server2 Offline Offline
Resource: Mounts server1 Online Online
Resource: rmanb_fs server2 Offline Offline
Resource: rmanb_fs server1 Online Online
-- IPMP Groups --
Node Name Group Status Adapter Status
IPMP Group: appserver1 app1-nafo Online ce5 Online
IPMP Group: appserver2 app2-nafo Online ce3 Online

Gethostbyname daemon.error

Hi,
I have done a Solaris 8 jumpstart install on a Netra X1 - successfully - i think...
I have found the following error in dmesg and /var/adm/messages
<date> <hostname> /usr/lib/snmp/snmpdx: [ID 838575 daemon.error] unable to get my IP address:
gethostbyname(tatiana) failed [h_errno: host not found(1)]
I also see this when I boot up at the console.
Can anyone tell me what this means and what this effects?
Many Thanks
Monica

Hi There,
Step1
First check in Services Manager to see that OracleTNSNames service is running. If it is running go to Step 2. In not start it and then restart PSUB service and try to run a job.
Step 2
Lets say you have installed OC in D drive.
Go to D:\oracle\ora92\network\admin\tnsnames.ora
Open tnsnames.ora in notepad and check to see whats the "Service Name".
Make sure that the Startup parameters you are giving when starting PSUB contains SID which = Service name
For example service name is ocproddb then:
Start PSUB as RXCPROD with parameters:
ocproddb 45 verbose D:\\opapps\\oc\\45
Let me know whether it helps.
Best regards
Edited by: user1841803 on Dec 28, 2008 11:00 PM

Solaris 9 kernel message : stgd-app-prd rpc.cmsd: [ID 767094 daemon.error]

Hello,
I have a lot of those messages when I issue the dmesg on one of our production server :
Feb 9 11:09:27 stgd-app-prd rpc.cmsd: [ID 767094 daemon.error] svc_reg(tcp) failed
Feb 9 11:13:16 stgd-app-prd last message repeated 65 times
Feb 9 11:13:16 stgd-app-prd last message repeated 38 times
Feb 9 11:13:22 stgd-app-prd rpc.cmsd: [ID 767094 daemon.error] svc_reg(tcp) failed
Feb 9 11:13:22 stgd-app-prd rpc.cmsd: [ID 767094 daemon.error] svc_reg(tcp) failed
Feb 9 11:19:59 stgd-app-prd last message repeated 66 times
Feb 9 11:19:59 stgd-app-prd last message repeated 66 times
Feb 9 11:20:05 stgd-app-prd rpc.cmsd: [ID 767094 daemon.error] svc_reg(tcp) failed
Feb 9 11:20:05 stgd-app-prd rpc.cmsd: [ID 767094 daemon.error] svc_reg(tcp) failed
Feb 9 11:26:41 stgd-app-prd last message repeated 66 times
Feb 9 11:26:41 stgd-app-prd last message repeated 66 times
Feb 9 11:26:47 stgd-app-prd rpc.cmsd: [ID 767094 daemon.error] svc_reg(tcp) failed
Feb 9 11:26:47 stgd-app-prd rpc.cmsd: [ID 767094 daemon.error] svc_reg(tcp) failed
Feb 9 11:33:17 stgd-app-prd last message repeated 64 times
Feb 9 11:33:17 stgd-app-prd last message repeated 64 times
Feb 9 11:33:23 stgd-app-prd rpc.cmsd: [ID 767094 daemon.error] svc_reg(tcp) failed
Feb 9 11:33:23 stgd-app-prd rpc.cmsd: [ID 767094 daemon.error] svc_reg(tcp) failed
Feb 9 11:40:00 stgd-app-prd last message repeated 66 times
Feb 9 11:40:00 stgd-app-prd last message repeated 66 times
Feb 9 11:40:06 stgd-app-prd rpc.cmsd: [ID 767094 daemon.error] svc_reg(tcp) failed
Feb 9 11:40:06 stgd-app-prd rpc.cmsd: [ID 767094 daemon.error] svc_reg(tcp) failed
root@stgd-app-prd # uname -a
SunOS stgd-app-prd 5.9 Generic_122300-25 sun4u sparc SUNW,Sun-Fire-V210
root@stgd-app-prd #
Anyone have an idea of what it is?

hi,
The rpc.cmsd is a calender/appointment scheduler service. It is enabled by default on Sun Solaris machines. It can be accessed through the "Calendar Manager" on the older Openwindows environment, or through the "Calender" program in the newer CDE environment.
i think it is harmless. you dont worry about it. you can try it to exit CDE , then what result is it ?
best regards

[ID 365563 daemon.error] can't get stderr port: Cannot assign requested add

Hello friends, i m getting the messages bellow in error logs, please suggest me what i have to do
" [ID 365563 daemon.error] can't get stderr port: Cannot assign requested add"

Hi Tom,
     Thanks, but at this point, I've rebooted, checked and double-checked more times than I'd care to count...:(
     Since I can see the NMEA strings when the GPS module is hooked-up to the USB port, I guess I'll assume there's some reason why the
     AMA0 UART has not been released, or that the GPS receives some different signals through the TTY that it's not seeing through the AMA0.
      As I mentioned, when I use 'cat /dev/ttyAMA0', it just hangs, like it's getting no data. I'll keep looking...
     Thanks for your help,
          Dave

[ID 702911 daemon.error] subagent registration failed

Hi,
I am getting the following error messages in the /var/adm/messages:
dhemapn1 /opt/sog/bin/sogalarmd: [ID 702911 daemon.error] subagent registration failed
Would anyone please suggest how to handle this issue.
Thanks in advance
Regards
Shahriar

Hi,
Suggest to check sub agent registration file in /etc/snmp/conf directory(with .reg exetention). Please verify if you have mentioned any port number in it. Check same not being used by any other agent or application. Also check "command" veriable in master agent resource file to invokes subagent. Most likely I feel it may be port clash issue.
You may also confirm that port you are using is not listed for some other application in /etc/services file.
Thanks,
Santosh

Daemon error while connecting:/@ocproddc

Hi!,
I am using Oracle Clinical version 4.5.0. OC back end is installed on Windows 2000.
PSUB batch job has hung with “ENTERED” status. Log file is showing following error:
ERROR: Daemon error while connecting:/@ocproddc
ORA-12154: TNS: could not resolve service name
Please provide solution.
Thanks
Message was edited by:
user570602

Hi There,
Step1
First check in Services Manager to see that OracleTNSNames service is running. If it is running go to Step 2. In not start it and then restart PSUB service and try to run a job.
Step 2
Lets say you have installed OC in D drive.
Go to D:\oracle\ora92\network\admin\tnsnames.ora
Open tnsnames.ora in notepad and check to see whats the "Service Name".
Make sure that the Startup parameters you are giving when starting PSUB contains SID which = Service name
For example service name is ocproddb then:
Start PSUB as RXCPROD with parameters:
ocproddb 45 verbose D:\\opapps\\oc\\45
Let me know whether it helps.
Best regards
Edited by: user1841803 on Dec 28, 2008 11:00 PM

CSS Daemon error !!

Hello ,
I am having problems connecting from RMAN to the database (Oracle 10.2.0.3 running on CRS , AIX 5.3).
When i am trying to connect it shows following errors.
pr:/u00/oracle/product/10.2.0/crs/bin%*> rman target /
Recovery Manager: Release 10.2.0.3.0 - Production on Mon Oct 13 17:09:06 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT rows
ORACLE error from target database:
ORA-29701: unable to connect to Cluster Manager
connected to target database: PSP (DBID=695888555)
== Then i checked CSSD which shows like below
pr://u00/oracle/product/10.2.0/crs/bin:/crsctl check crs
Failure 1 contacting CSS daemon
ON 08th Oct , system admin added one more port and i think they cloned from existing (PR) to (PR-dr) from Smitty.. I think that time CRS switched from PR to PR-dr while system admins changed back the configuration.
pr:/u00/oracle/product/10.2.0/crs/log%*> ls -lrt
total 0
drwxrwx--- 2 oracle dba 256 Mar 06 2008 crs
drwxr-xr-t 8 root dba 256 Mar 06 2008 pr
drwxr-xr-x 3 root system 256 Oct 08 14:00 pr-dr
pr:/u00/oracle/product/10.2.0/crs/log/PR-dr/racg ls -lrt
drwxr-xr-x 2 root system 256 Oct 08 14:00 racgmain
drwxr-xr-x 2 root system 256 Oct 08 14:00 racgeut
-rw-r--r-- 1 root system 1737625 Oct 13 17:15 ora.pr.vip.log
--- tail ora.pra.vip.log
2008-10-13 17:13:53.231: [ RACG][1] [802942][1][ora.pr.vip]: clsrccssgetctx: clsssinit() failed. rc=21
2008-10-13 17:13:53.264: [ RACG][1] [802942][1][ora.pr.vip]: clsrcgetprsrctx: prsr_init_ext returned rc = 5
I think if i will stop the crs on this node while crs will be active on other node .. Will this work ?
Or can i use crsstart to restart cssd
Or i can use localconfig
Please help.
Thanks
Edited by: P explorer on Oct 13, 2008 5:22 PM

Hi P explorer
Sorry for the late answer, may this work-around should help you out of that issue. it applies to Version: 10.1.0.2 to 10.2.0.4
Cause
The hidden directory '/var/tmp/.oracle' was removed while instances & the CRS stack were up and running. Typically this directory contains a number of "special" socket files that are used by local clients to connect via the IPC protocol (sqlnet) to various Oracle processes including the TNS listener, the CSS, CRS & EVM daemons or even the database instance. These files are created when the "listening" process starts.
Solution
The only way to re-create these special files is to restart (instance, listener, CRS). In a RAC environment this requires the shutdown & restart of the entire CRS stack.
As these special files are required to communicate with the various CRS daemons, it most likely will not be possible to stop (and restart) the CRS stack using the following commands as user root - but it won't hurt to try it anyway:
10gR1:
# /etc/init.d./init.crs stop
# /etc/init.d./init.crs start
10gR2:
# $ORA_CRS_HOME/bin/crsctl stop crs
# $ORA_CRS_HOME/bin/crsctl start crs
If the above fails to successfully stop the CRS stack, a system reboot will be inevitable.
As for deleting files from temporary directory via a cronjob:
the directory '/var/tmp/.oracle' (on some platform /tmp/.oracle) should be excluded from such jobs. The files in this directory on occupy a few bytes and generally do not need to be cleaned up.
A good practice for deleting files is to check if the file is still being opened by a process, most Unix platforms have a 'fuser' command which returns the process IDs of such processes.
Good luck.

Daemon error with Intego NetBarrier X3

When trying to launch NetBarrier I get message window with the following: "Waiting for Max OS X initialization to complete..."
After some time, an error message appears as follows:
"A fatal error occurred. The NetBarrier daemon is not running. It should be running to allow NetBarrier to configure it. You may need to restart your Macintosh."
I tried restarting but it did not resolve the problem. Any suggestions??
I've read the other threads recommending to uninstall Intego due to VirusBarrier problems. So far, VB appears to be running okay. Let's say that I want to keep the $130 package and that since it worked for a couple of weeks, I'd like to know what caused it to not work anymore. I sent the above info to Intego on 12/30 and have not yet heard back. I'm hoping its the holidays slowing things up!

I contacted Intego by telephone (toll call) and the person I spoke with was very helpful. After trying a few things, she determined that my best course was a complete uninstall and reinstall of the Security Barrier software package.
So far, it seems to be working just fine. The pain is that I have to reset all of the preferences for each of my family members. Hopefully, this will not be a recurring problem.
PS- About an hour after my telephone call with Intego, a different person finally responded to my web-based request for help. This person's solution was to delete all of the preference files, one-by-one until it the problem went away with restarts between each deletion. I think the reinstall was the least painful option.

[SOLVED] alsa daemon error during init with Thinkpad X220

Hi,
I just updated my system (including a kernel update). After reboot, I found alsa daemon, which is used to restore previous volume level, failed to start. I tried to start that daemon manually after the boot process is completed, and that produced an error message
sudo rc.d start alsa
:: Restoring ALSA Levels [BUSY]
Found hardware: "HDA-Intel" "Intel CougarPoint HDMI" "HDA:14f1506e,17aa21da,00100000 HDA:80862805,80860101,00100000" "0x17aa" "0x21da"
Hardware is initialized using a generic method
[FAIL]
However, the volume level restored successfully. It seems that recent Intel plantform provides two soundcard, and that error only affected the secondary card, which has nothing to do about system volume level.
Anyway, I hate to have a ``[FAIL]'' During init process. Any suggesting to get rid of that problem? Thanks
System Info: (I use linux-ck as my kernel with modified config)
uname -a
Linux Thomas 3.2.1-2-ck #1 SMP PREEMPT Sun Jan 15 00:16:41 CST 2012 x86_64 Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz GenuineIntel GNU/Linux
lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e)
0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 07)
0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
config.gz:
http://codepad.org/XtUSbtdw
(Edit typo)
Last edited by cap_sensitive (2012-01-17 06:12:01)

This morning, I performed a system update and I did not see any errors with alsa when I rebooted. Audio hardware is:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Have you tried manually restarting alsa after the system boots up to see if you get the same error? You can restart alsa with the following command:
sudo /etc/rc.d/alsa force-restart
Post your results. If the error occurs during the manual restart, it should also include some details about what caused the error

ICAP Daemon error

CE-ICAP-3-690100: Error during rpc to ICAP daemon: [failure
description]
I see this error in the CE logs. All internet traffic stops until i reboot the content engine and all is well again. Has anyone else seen this issue before??

I can't find any info with that bug ID... Can you give me a link please. This would be very helpful, thanks.

Mail-daemon error for MMS I haven't send !!!

Hi !
Since this morning I received 2 return email (MMS) from different mail-daemon telling me that the email adress **** where "I" sent before doesn't exist anymore etc etc...
The thing is that I have no idea to who those email are and I didn't send any email(MMS)!
It seems like someone is using my MMS adress to send spam email or something like that.
I have a 3GS with the last OS and I am living in Japan and therefore use the carrier softbank.
Anyone with the same strange behavior ?
(+ I have mini crack in the top left of my phone but that's an other story...)

There you go guys, if this is useful for something...

Daemon error

I use sea sdk 1.03 with solaris 8
when i make a get operation i have 3 lines in /var/log/syslog
ASN.1 type (0X2) is not NULL for node testinteger
val is not NULL for node testinteger
val_len is not NULL for node testinteger
I run snmpd in debug mode ( -d 4 )
I can see for each call of an oid two PDU
GETNEXT_REQ_MSQ and GET_RSP_MSG
for PDU GETNEXT_REQ_MSG PDU i have
lenght=1
value=1
( doesn't this value have to be NULL ? )
Does anybody have an idea of this problem, thank's

Hi Mandy,
Please check if the below note helps you.
RDA daemon stops when an overload occurs :SAP Note Number: 1012869
Regards,
Sudheer.

Xntpd daemon error

Similar Messages

Maybe you are looking for