Xonar D1 front panel microphone not working in kernel 2.6.33

It is not possible to record anything from my front panel microphone jack after I updated kernel to 2.6.33.
It still works OK with kernel 2.6.32.10, but does not work with 2.6.33.3, and it did not work with 2.6.33.rc8 too. The front panel switch in alsamixer switches only output but not input (mic) now. Before, the switch had impact on both output and input.
When I activate the back panel on the card everything is working well (back panel connectors are active, front panel connectors are inactive). When I activate the front panel then the front panel microphone is not working (back panel microphone works). The alsamixer front panel switch does not have impact on the microphone any more and no switch was added to control the microphone separately from the output.
The alsa version is 1.0.23.
I use 32 bit kernels. My brother uses 64 bit kernels and the problem is the same for him too. Although he uses Xonar DX.
Any idea how to get this fixed?

I'm also having trouble with the 2800pci driver.  I installed the v26 firmware from the PKGBUILD in this thread, and it does scan as Cdh says, but will not connect...
$ dmesg | grep rt2800pci
rt2800pci 0000:04:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Registered led device: rt2800pci-phy0::radio
Registered led device: rt2800pci-phy0::assoc
Registered led device: rt2800pci-phy0::quality
rt2800pci 0000:04:01.0: firmware: requesting rt2860.bin
phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
Should it really be loading all these modules just to use rt2800pci?
$ lsmod | grep 'rt'
rt2800pci 9547 0
rt2800lib 21101 1 rt2800pci
rt2x00usb 7607 1 rt2800lib
rt2x00pci 5005 1 rt2800pci
crc_ccitt 1307 1 rt2800pci
rt2x00lib 25148 4 rt2800pci,rt2800lib,rt2x00usb,rt2x00pci
led_class 2609 1 rt2x00lib
mac80211 171772 3 rt2x00usb,rt2x00pci,rt2x00lib
cfg80211 126658 2 rt2x00lib,mac80211
iTCO_vendor_support 1873 1 iTCO_wdt
eeprom_93cx6 1352 1 rt2800pci
usbcore 144604 6 usbhid,rt2x00usb,usb_storage,uhci_hcd,ehci_hcd
rtc_cmos 8990 0
rtc_core 14439 1 rtc_cmos
rtc_lib 1842 1 rtc_core
The rt2860sta driver does work, but only at G speed not N.  I also tried the ralink 2.3.0.0 driver, but  it is even slower than the kernel driver.  With 2.6.32 kernel, I was able to get N speed from their 2.1.2.0 driver, but that one won't compile anymore.  I've had nothing but trouble with this card for the last year.
I'm very tempted to just buy another card, but I'm not sure which one to buy.

Similar Messages

  • Front panel sound not working

    Front panel sound not working* Hello everyone,
    I've just bought a PCI Express X-Fi Titanium. So far everything works great with my 5. sound system, but I have problems with my front panel audio.
    My case only supports AC97 front panel audio, but has all individual connectors (so 7 single connectors, not one with 0 pins).
    I've already tried only connecting 5 pins (the two AC97 return pins unconnected) and connecting all 7 pins. In both ways the microphone works, but sadly not the headphone output. I also tried changing the two options in the driver but that changed nothing.
    I did some Google searching and found many reports where the sound itself works with an AC97 front panel on an HD soundcard, just no jack detection.
    Any ideas why that isn't working for me?

    ! Try here for pinouts of your jacks. I have a Cooler Master case that has AC97 and INTEL HD front panel jacks, but here is the kicker. The AC97 jacks come from the front panel first and then about fi've inches from this jack is an INTEL HD jack. A few wires are changed but perhaps these will help...
    http://www.intel.com/support/motherboards/desktop/sb/CS-0585.htm
    Cheers,
    Jerry Macguire

  • K9N2G Neo Front panel audio not working

    I have plugged in various cases and i/o bays into the audio connector on this mb and NONE of them work. Yes I have tried the "disable detection" option with no luck. I am currently trying to use a silverstone fp32 i/o bay that definately supports hd audio but it still doesn't work. I made no wiring mistake as it was a plug and not seperate wires.
    http://www.silverstonetek.com/products/p_contents.php?pno=fp32
    What do I have to do to get front panel audio that was promised with this board?
    edit: you know I have NEVER had trouble with AC97 yet I have NEVER gotten HD audio to work properly EVER

    It doesn't follow AC97. But it is a Realtec chip, and they often run into problems. For example they'd like their drivers installed while in SafeMode.
    Where exactly did the problem come up? Is the HD controller enabled, (BIOS)?
    Is this relevant, stolen from the Englizsch only manual:
    "When you are playing the first audio source (for example: use Windows Media
    Player to play DVD/VCD), the output will be played from the rear panel, which is the
    default setting.
    Then you must to select the Realtek HD Audio front output from the scroll list
    first, and use a different program to play the second audio source (for example: use
    Winamp to play MP3 files). You will find that the second audio source (MP3 music) will
    come out from the Line-Out audio jack of Front Panel."
    Off: Think this is the first time this board come before my eyes in this forum.

  • Front Panel Audio not working P43-C51

    Rear panel works Front does not I tried the case connector and also an Card reader that has a mic and speaker jack.
     Installed the Realtek drivers and Audio Manager and it senses when I plug in a mic or speakers in the back but not the front.
    Help Please

    It Worked!
    Dude you are the Sheeet!   Will this be fixed so someday my C43-C51 will work like my wife's 790XT-G45...lol

  • TS4079 My ipad microphone next to the front camera, is not working at all, what can I do if the warranty is not available

    My ipad microphone next to the front camera, is not working at all, what can I do if the warranty is not available

    Did you flip the switch?
    http://i1224.photobucket.com/albums/ee374/Diavonex/91e9edf6b2127310428d94cf75cb6 15a_zps380c63c4.jpg

  • X-Fi Titanium PCI Express front pannel connection not working

    <font face="verdana,geneva" size="3">I can not get any signal to or from the front pannel connector of my X-Fi Titanium PCI Express. (The rear jacks are working fine.)
    <font face="verdana,geneva" size="3">The front header cable from my Antec P-80B worked perfectly with my onboard motherboard sound. Now that I have it connected to my X-Fi I get nothing from the jacks on the front of my case. (The onboard sound is disabled in my BIOS.)? I've double and tripple checked the connection and it is properly keyed and fitted. Is there a step or a setting that I'm missing somewhere to get this working? Can anyone confirm that the front pannel connection is acti've on the X-Fi Titanium PCI Express?

    Re: X-Fi Titanium PCI Express front pannel connection not working? I was truly hoping that would help and I wanted to give you some additional hope. I have a coolermaster case, and it has the AC97 jack on the inside with all my other other front panel connectors for hard dri've activity light, reset, and power on. Three inches down from the AC97 jack, the INTEL HD *which works beautifully with the X-FI, only differs by three wires in different locations and the two pinouts configurations match those of the INTEL site identically.
    Please tell me what happens as I would like to post a step by step guide for the others here in the forum. You will know when you have successfully adapted the connector because in VISTA and Windows 7, your sound applet in control panel will have a display of the connectors "lit up" when they are successfully connected. Mine shows FP microphone in the applet when its plugged in, and grayed out when its not. Its great for telling if I am connected on the rear of the soundcard of the front.
    Best of luck and .......
    Message Edited by jmacguire on 07-06-2009 :09 PM

  • Internal Webcam and Microphone not working after Screen Fix

    I own a HP Envy Spectre XT Ultrabook, and last week I tried to use the webcam and the microphone for the first time in a few months.
    However I was shocked to find that Skype kept saying that the webcam was not detected. The microphone also could not register any sound.
    Device Manager did not show any imaging devices or the webcamera, even after setting it to view non-present devices.
    A check using msinfo32 did not review the webcamera either, and there were no problem devices.
    Control Panel >> Sound showed that the Internal Microphone using IDT High Definition Audio Codec was enabled and working, however it could not detect any sound. All drivers are checked to be up-to-date.
    I suspect this has something to do with the screen repair last month which a HP on-site technician came down to replace my screen, although I cannot be 100% sure. Although the screen is now working, the technician did not do a good job reassembling the screen - the bottom left corner of the screen cover has not be able to attach properly to the screen. 
    I have gone through my BIOS setup to make sure that there is no webcam disabled.
    I have tried rolling-back and reinstalling the drivers for the microphone but it did not work.
    I have tried uninstalling CyberLink YouCam (laptop preinstalled webcam software).
    Please help, these two components are very important to me as I am going overseas soon. The laptop is still under warranty.

    Hey ajun,
    Thank you very much for the information!
    For troubleshooting your Webcam, I would suggest taking a look at the document Webcam Troubleshooting (Windows 7). I would suggest the two options Video does not appear in your webcam software (such as YouCam, Skype, Messenger, ect.), and Webcam is not listed in Device Manager.
    For your internal microphone not working either, please take a look at the document Resolving Microphone and Line-in Problems (Windows 7). From this document, I would suggest following the top two symptoms.
    Please let me know the outcome of these troubleshooting steps.
    Good luck, and have a great day!
    I worked on behalf of HP

  • Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

    Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
    The system shows everything is ok.
    Please any help greatly apreaciated.
    Thank you
    Valentin

    ValentinT, welcome to the forum.
    There are no drivers available for Windows 8.  I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected.  It seems that the Sound is one area that gets changed when updating to Win 8.1.  At least, this is what happened to me.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • USB webcam microphone not working with Starcraft 2 voice chat

    =USB webcam microphone not working with Starcraft 2 voice chat?Windows 7, X-fi Fatalty Pro
    I have a webcam with ?a built in microphone (Ps3 eye). ?It is connected by USB. ?The drivers are the CL-Eye drivers; a third party driver set since Sony does not directly support the eye for PC.
    in the windows audio device management, the microphone appears as normal and is set as the default device. ?I can use the windows sound recorder to record me speaking just fine. ?However if I use any other applications it doesn't seem to work at all. ?I can select the device as the default recording device in Starcraft 2 as well as Teamspeak 3 but no sound is detected. ?The USB microphone does not show up as a selectable device in recording options in my Creative Control Panel. ?Disabling the default creative microphone does nothing.
    I think the problem is in that windows can directly detect the microphone and so software that uses the windows audio device manager works fine, but anything that talks directly with my sound card software does not properly detect the microphone. ?Basically, I can select the device as a default device but it does not work.
    Any thoughts on this or am I SOL and have to find myself a shiny new headset?

    I had the same problem. You need to check the device index of your USB mic.
    In my case. I'm on a Mac OSX 10.6 system. I had four devices cataloged. With the last one being the USB mic.
    Then set like so in your AS code audioPub.microphoneManager.micIndex = 3;
    Remember, that the indexing is 0 based.
    The sound framework make the assumption that the index is 0.
    Hope that helps.

  • IPOD Mini front panel buttons not functioning

    First of all, thanks for reading my message.
    I have this wierd problem. My front panel buttons namely Menu, forward, rewind, play/pause and wheel donot work.
    The thing that is wierd is that my ipod is still functional using the remote. Even when I am playing MP3s using remote, those regular buttons dont function. They look like they are dead, no response what so ever.
    Since the remote has limited buttons I want my front panel buttons to work. Any inputs on this regard is appretiated.
    P4   Windows XP  

    More details:
    I can charge my IPOD.
    sync it to itunes.
    Hold works.
    ear phone jack works.
    In all my IPOD is in a state similar to what you have when you switch to "HOLD". Irespective of whether I swith the hold button or not.
    P4   Windows XP  

  • Microphone not working Windows 10

    I have an Asus GL551 series laptop and I just upgraded to Windows 10. I have all updated drivers and I use Realtek HD Audio Manager. My microphone works except when on Skype, which before upgrading I had no issues. The microphone is working but the gain is very low, but my mic works fine on Google Hangouts, and other applications. I was able to fix it by going into control panel-communications-then set communication activity to "do nothing" when it was previously set to "reduce the volume of other sounds by 80%." It worked for a minute, but then the person on the other end couldn't hear me anymore. The settings were still the same from when I changed them. I've tried configuring my microphone, changing the boost, not having Skype automatically adjust microphone settings, uninstalling and reinstalling drivers, and Skype. Any help would be greatly appreciated. Thanks.

    Hi copperpot, As you notice with my posts and posts from others, you are not the only person having this problem. Here are my and other people problems: http://community.skype.com/t5/Windows-desktop-client/My-partner-updated-to-Windows-10-and-I-cant-hear-them-anymore/m-p/4067742#M359223 http://community.skype.com/t5/Windows-desktop-client/Help-Windows-10-Microphone-not-working/m-p/4067282#M359088 http://community.skype.com/t5/Windows-desktop-client/Microphone-volume-in-and-only-in-skype-extremely-low-in-windows/m-p/4066915#M359000 Hopefully Skype Team is aware of this problem and on the way providing us with the fix...

  • Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
    I came home, banged the phone against the wall and it worked.
    Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well.

  • I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, what should i do?

    I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?

    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    If still problem make an appointment at the Genius Bar of an Apple store.

  • Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

    Internal Microphone not working with Quicktime and some other apps, yet it does for Skype. 
    Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
    Any suggestions, please?

    Hi,
    Download Audio driver from here.
    Intructions how to install it in Vista/Win7.
    Extract this driver with Winrar.
    Open Device manager and expand the Sound, video and game controllers section.
    Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
    Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
    Click "Have Disk..." then Browse to the folder where the drivers were extracted  .......\V64 for 64-bit Vista/Win7. Click OK.
    Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
    Click Next, and you're done.
    I'm not sure which one from the list will work for You.
    This drivers weren't test. So if You will try them and it will work for You let us now about.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Adobe Exchange Panel Update not working?

    Hello:
    My OS is Windows 7 64 bit and I have Ps and Ia installed on my laptop.
    I downloaded and installed the Adobe Exchange roughly two months ago and everything worked great at first.
    I installed a few things such as the Paper Textures and a game Level Up (can't recall the others at the moment).
    The game worked three times but then it just stopped responding. I never had an issue with the other extensions.
    Yesterday I went to try out the game again but when i opened the Exchange panel it said there was a new update and so i (sadly) opted to click 'Update'
    After clicking the update button I received a message:
    Also, Norton said the link or what have ya was NOT trusted and is Unknown. So, I clicked on the Norton message and got this info:
    Heuristic virus? um, what?  
    http://www.pctools.com/security-news/heuristic-virus-definition/
    I went ahead and Removed all the extensions I had downloaded/installed from the Exchange panel but I would very much like to be able to use them again.
    Any ideas as to the issue? Is there a solution?
    I have shut off Norton to see if that would work but I still get the above message  "... valid signature ... "
    Sure would appreciate some input.
    Thank you in advance
    ps. could the Heuristic virus detection be a False Positive?

    Hello:
     You are totally misunderstanding me. I have Windows 7 64 bit and I did have the Exchange Panel already installed. When I went to use the Exchange PanelIT had an update. I didNOT update to Windows 8.
    I clicked on the UPDATE IN the Exchange Panel which is what would NOT install because NORTON said it IS MALWARE.
    I tried to update the Exchange Panel and NOT my operating system.
    The attempt to Update the Exchange Panel caused the older version of the Exchange Panel to not work. So, I had to Uninstall the Exchange Panel and then when I went to Reinstall the Exchange Panel it would NOT install. And now I cannot use it at all.
    Again, I DO have Windows 7 and NOT Windows 8.
    Please, I would very much like to be able to use the Exchange Panel again because I would like to install some extensions, let me know when this issue is resolved.
    Thank You,
    Kara A. Rowe
    [email protected]

Maybe you are looking for