Xoom 4G Works Everywhere but San Antonio

I sent my Xoom into Motorola to have the 4G radio installed, received it
back no 4G, I took it to Verizon store they contacted support no idea they
contacted Motorola wanted me to return to see what is going on. I did not receive my return box before I had
to go to east coast to I took my Xoom, funny it works everywhere there is 4G
except where I live even though I get 4G on my Bionic. Will someone look into this Verizon said I
need to send to Motorola but 4G radio works fine NY, NJ, NH, CN, Houston,
Dallas, Philly, everywhere but San Antonio. Any IDEAS???

Well having Verizon Tier 2 and Motorola all on the phone in a conference
call, pulled card, reset all settings, wiped tablet completely reset all
settings back, putting a completely new SIMS card in. Again it all points back to a network issue,
either the network doesn’t like some of the 4G radios and it’s a crap shoot
which ones or there is an issue with the way the SIDS are shared in San Antonio
and Austin area. Xoom works perfectly
fine everywhere in every city that has 4G except San Antonio. If all logical aspects of trouble shooting
had not been tried I would not be reaching out, it is not settings on my tablet it’s
in the Verizon Network someone just has to recognize that and try to resolve
it.

Similar Messages

Just purchased an IPhone 4 it works everywhere except for in my house. Have had a new sim card put in and restored it and it still works everywhere but in my house....any suggestions?

Just purchased an iPhone 4 and it works everywhere except in my house, anyone else with that problem?

The construction materials used could be that of something that dampens the wireless signal.

My iPad works everywhere but I have issues with Fios supplied router.

I have the dropping signal and having to resign in problem. I do not have any problems at my work Verizon DSL supplied router.
I even took it to a friend's house who has Fios, same dropping problem occured on his Fios router.
Might it be a security feature? When the iPad shuts down the router cuts the signal?

etresoft wrote:
dubgiant90 wrote:
From what I've seen, the ipad is working well with DSL (mostly). The problem lies mostly with the newer technology like FIOS.
The iPad has nothing to do with either DSL or FIOS. Those are broadband technologies that connect your house to the Internet. Where people are having trouble is with connecting the DSL/FIOS device to the iPad via WiFi. With either DSL or FIOS, it is trivially easy to swap out the WiFi part with another brand if router.
So how do people conclude that it's the iPad? Because everything else seems to be working fine!
Unfortunately, that is a logically fallacy. Clearly the iPad doesn't work well with a number of routers. No one disputes that. The dispute is over how large that problem set really is and, more importantly, if there is anything in the world that Apple can do about it. No one outside Apple has any idea of the answers to those two questions. To suggest that Apple doesn't care is just ridiculous. I have no doubt at all that Apple is doing everything economically and technically possible to improve the situation. However, there just might be nothing they can do.
Other peoples don't and they're trying to find the exact problem which IS the iPad.
How can you be "trying to find" the problem when you already "know" the answer?
Take off your apple love shades and look at it from a realistic point of view.
I complain about Apple on a regular basis in the developer forums where I mostly hang out. Even there, when I complain, it is in the context of trying to help people figure out some problem with Apple technologies. I am just as harsh there with anyone who uses poor logic and winds up blaming Apple unjustly. If you have facts and logic, I am more than happy to reproduce the problem, report it to Apple, and look for a usable workaround. I see no point whatsoever in using poor logic to jump to a conclusion and join the cacophony of rants to call on Apple to "make a statement" or something similarly silly.
Well gee, they haven't public ally announced anything. YOU don't know how big this problem is either so atop acting like it's nothing. People on here are really frustrated that they jut spent 500$+ for an item that NEEDS Internet. It's like if It was a problem with screen brightness, okay whatever. If it was a problem with a small glitch then okay. This is a problem with wifi. If it doesn't work properly, the item is completely useless. I don't geet how you can see this not as an iPad problem when there are so many devices in the world that use wifi just fine. I've never heard of having to buy a new router to use an item. Apple sure as **** didn't advertise it like that either. Truth it they screwed up and they're handling it quite ******. If there really isn't anything in the world that apple can do about it then everyone should be refunded their money, this product wAs never advertised or marketed to work with some routers. It was a device created to work on the go anywhere and everywhere. And congratulations it has been working for you but ithasnt for everyone. I finally got my problem fixed at home by reading this helpful online forum. The fios thread single handledly fixed my issue at home. The reason I'm so mad is because apple hasn't released anything to the public that helped fixed anything. If this online support forum with just regular tech guys can find a solution, why the he'll can't they. And if someone has a problem and they dot know about these forums, they go to the apple store. And the apple store BLINDLY tests just on their own network (similar to how you bashed Princeton for not testing outside of their network) and they conclude that it's the routers problem, ****** rediculous

My enter button and web search orb won't work only on my homepage. Works everywhere but there. We have Yahoo for a homepage. What should I do?

We have the at&t/yahoo homepage fixed where we can check our other email account. On this page, I have just a color theme and all of the news items disabled. We have had this for three years now. Just a few days ago we noticed that when we use the search bar that is included in the middle of the page that the enter button won't work. I usually type and hit enter as opposed to clicking on the mouse button. I do have the search assistant on. I tried to disable that, but it didn't help. I have a couple of other search toolbars and they work fine with the keyboard. It's just convenient especially for my husband to have it this way. I have searched the internet for several days and have come close to what I thought would be the answer but nothing has worked yet. Most of the questions/answers were old anyway. It might not have anything to do with Firefox, I just didn't know where else to ask questions too.

Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?

Query works everywhere but Flex: inline views not supported perhaps?

EDIT2: Actually not. It turns out to be a bug in the way Adobe is treating any integer PK column, no matter how it is defined, INT, or INTEGER, as an alias for the rowid in SQlite. This is incorrect. rowid does not always equal the PK value. This causes joins to return the wrong values.
EDIT: turns out to be the use of the absolute value function in the query.
See http://forums.adobe.com/thread/516392
My bread-and-butter query, the one that is the core of my application, uses a UNION query with inline views when doing proximity word-searches. It works beautifully in SQLite returning a resultset in about one second from an over 300MB database, against several tables equijoined, the two biggest tables having close to 4 million rows and 300,000 rows, respectively.
It runs fine in Visual Studio using the .NET provider for SQLite, and also in SQLite Manager 0.5.6 by Mrinal Kant and in other front-ends to SQLite. But the verbatim query returns no rows in Flex and zero rows in the SQLite Admin GUI front-end, which is built on the Flex SQL libraries.
My first thought is that inline views might not be supported in Flex?
Does Flex do what in the Microsoft world is called a "pass-through" query, sending the sql intact through to the back end, or does Flex take the query statement apart and apply the WHERE clause conditions client-side, as Microsoft Access does to support so-called "heterogeneous" joins, i.e. queries that might join tables from, say, SQL Server and Oracle in the same query?

EDIT2: Actually not. It turns out to be a bug in the way Adobe is treating any integer PK column, no matter how it is defined, INT, or INTEGER, as an alias for the rowid in SQlite. This is incorrect. rowid does not always equal the PK value. This causes joins to return the wrong values.
EDIT: turns out to be the use of the absolute value function in the query.
See http://forums.adobe.com/thread/516392
My bread-and-butter query, the one that is the core of my application, uses a UNION query with inline views when doing proximity word-searches. It works beautifully in SQLite returning a resultset in about one second from an over 300MB database, against several tables equijoined, the two biggest tables having close to 4 million rows and 300,000 rows, respectively.
It runs fine in Visual Studio using the .NET provider for SQLite, and also in SQLite Manager 0.5.6 by Mrinal Kant and in other front-ends to SQLite. But the verbatim query returns no rows in Flex and zero rows in the SQLite Admin GUI front-end, which is built on the Flex SQL libraries.
My first thought is that inline views might not be supported in Flex?
Does Flex do what in the Microsoft world is called a "pass-through" query, sending the sql intact through to the back end, or does Flex take the query statement apart and apply the WHERE clause conditions client-side, as Microsoft Access does to support so-called "heterogeneous" joins, i.e. queries that might join tables from, say, SQL Server and Oracle in the same query?

I just changed my password and work everywhere but Itunes? HELP

Ok so I changed my password security etc and the new password work anywhere on apple but not itunes store!!! Can someone please help. Thanks

iforgot.apple.com

My apps work everywhere but my house

My apps cannot be accessed from my home for some reason, everytime though I go somewhere and connect to the wifi, they work, but will not load from home. I know my internet is good, everything works on my windows phone and computer, so I do not understand.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Sound works everywhere BUT Safari

If I try to listen to a video on youtube, or Go Fish, or Disney.com, I get nothing. If I download the video with tubesock and play it on iTunes, it works fine. All my music on iTunes plays fine. When I push the volume buttons on the keyboard, I hear the nornal clicking sound. When I restart the computer, I get the normal guitar strum.
This problem exists whether I use Safari or Explorer.
iMac Mac OS X (10.4.3)

You're welcome. Glad I could help. Make sure you update your tag to 10.4.8. It's helpful information for anyone helping here.
Please consider marking this post "solved" to the far right of my name, next to the post "solving" your question. .
Helpful for others looking for a solved solution to a similar question, also helpful for me.
Aloha from Big Island.

My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

try this.
get back into your router's settings and start deleting devices that are not connected to your router.
you can also delete the ones that are connected - they'll connect again.
on the DHCP side of it, increase the amount of users that can connect/log in to your router.
see if that sorts it out for you.
good luck.

Hi, I' ll be San Antonio from 8-10th of Oct and want to buy an iphone 5. According to forums there is no unlucked yet. Thus, can i get simlocked but not contracted phone from any store? and is that possible to use that phone in Turkey without any prob.

Hi, I' ll be San Antonio from 8-10th of Oct and want to buy an iphone 5. According to forums there is no unlucked yet. Thus, can i get simlocked but not contracted phone from any store? and is that possible to use that phone in Turkey without any prob.

If you purchase the phone at the full contract price and have no term left on your carrier contract, the carrier will unlock it for you. That's what I am doing with AT&T. I'll pay the full purchase price for the phone and since I don't have a contract with them, they will unlock it for you. It can be difficult to get it done since most of their customer service is very ill informed but I have had many discussions with them on their chat that I have records of them stating they will unlock any phone if you do not have an existing contract. It's the law.

HT4623 Iphone 4s works great most everywhere but at home.

Hello All, I have two iphone 4s that work great most everywhere but home thru a cell phone amplifier. I get great numbers in the field test mode -80 to -65
and it still only works around 5% of the time. I've tried to reset the network, toggle in &out of airplane mode and turning it off and on still no luck. I noticed that the rrc state keeps switching from connect to disconnect. I think when it works the rrc state will read CELL_something. Is there a cure? Thanks for any help.
Bryan

I don't think I can, my Internet is not very fast. I still don't understand why the phone won't connect with the strong signal I'm getting I've heard there is some kind of glitch in the 4s and 5 iphones that it won't switch automatically,
The iphone 4 has a manual switch..I installed the new update last night, SOS it didn't help, if anything it made it worst.

Electrical Engineer with automated test experience looking for job in San Antonio Area

I am an Electrical Engineer with 33 years of experience. Much of my experience involves computer programming with an emphasis on electrical systems, either controlling equipment or automated testing. I have experience in numerous languages, most recently LabView, LabWindows/CVI, and TestStand, but also including 'C', Visual Basic, FORTRAN, and Z80 assembler. I have most recently worked in the MS Windows environment, but I have worked in the UNIX environment as well.
In addition to programming I have done some hardware design and equipment specification. I have done drafting of schematics in Visio, but I also have some experience with AutoCAD. I have written user's manuals and done hardware/software integration. I feel I have a broad range of experience in many areas of engineering and programming. I also feel that my engineering background helps be to understand the needs of the customer and thus be better able to translate those needs into the control or test program they need.
I currently live in San Antonio, Texas and am looking for a job in this area. A job on the south side of Austin might be considered if I could tele-commute or work in my home with occasional trips, eg. weekly, to Austin.

I would like to speak to you about your current work situation and the type of position you may be seeking. Currently, I am looking to hire experienced LabView programmers/Project engineers for a long-term opportunity. The following is a brief job description:
LabView Programmer/Project Engineer
Albuquerque, New Mexico
The company follows the industry with LabVIEW coding techniques. Using standards as old as VXI Plug-n-Play and as new as the parallel loop Event Structure / QueuedState Machine. This code is used as the centerpiece for Test & Measurement systems that span most industries including military/aerospace, biomedical, semiconductor, automotive and telecom.
Candidate will handle LabView integration projects from beginning to end. Will work closely with customers to understand requirements, participate in bid process, manage timelines on projects, perform LabView programming, and handle customer questions and concerns. The position requires 60% programming, 20% hardware design and test, 20% customer interface and project management. Prefer candidates with 7 to 10 years of LabView programming experience.
Ability to get a DoD security clearance required.
Please email me at [email protected] or call Sun Vega 505-342-5013 or 800-222-8406.

[PHP]simple script, works everywhere except Archlinux

Here is my script. It works everywhere (Debian, Ubuntu, Gentoo, CentOS) except my new Arch distribution.
<?php
$domains_array = array();
$tested_array = array();
$id = "hgEqp";
$queries = array('aaaa','bbbb','cccc');
srand((float)microtime()*1000000);
shuffle($queries);
foreach ($queries as $query) {
$url = 'http://some.url/&query='.$query;
for($i=0;$i<10;$i++) {
$array = unserialize(file_get_contents($url.(1+($i*100))));
$array_result = $array['ResultSet']['Result'];
foreach ($array_result as $a) {
preg_match("[http://(www\..+?)\/(.+?)]", $a['Url'], $preg);
if ($preg[1] != "" && !in_array($preg[1],$tested_array)) {
array_push($tested_array, $preg[1]);
$strona = @file_get_contents("http://".$preg[1]);
if ((strpos($strona, "test string") != FALSE) || (strpos($strona, "test string 2") != FALSE) || (strpos($strona, "test string 3") != FALSE)) {
if ((int)trim(exec('python ./test_page.py -s '.rawurlencode($preg[1]))) != 0) {
array_push($domains_array, $preg[1]);
echo "Domain ".$preg[1]." passed test and added to $domain_array...\n";
sleep(10);
echo "Finished page ".$i." of tested pages...\n";
echo "Finished adding tested pages to array...\n";
print_R($domains_array);
?>
On Arch it isnt throwing any error, but it is doing nothing (and extremly fast, normally it works very long). Somebody knows why it isnt working on Arch?
PS. I have Python installed and fopen allowed in php config
Last edited by Dinth (2009-03-15 18:14:45)

Well... putting your file in my Arch web server gives me a but of errors (as expected) but the files is definitely read and processed.
Warning: file_get_contents() [function.file-get-contents]: URL file-access is disabled in the server configuration in /home/ralvez/public_html/testing.php on line 18
Warning: file_get_contents(http://humber.ca/&query=bbbb1) [function.file-get-contents]: failed to open stream: no suitable wrapper could be found in /home/ralvez/public_html/testing.php on line 18
Warning: Invalid argument supplied for foreach() in /home/ralvez/public_html/testing.php on line 20
Finished page 0 of tested pages...
Warning: file_get_contents() [function.file-get-contents]: URL file-access is disabled in the server configuration in /home/ralvez/public_html/testing.php on line 18
Try using /var/logs/httpd/error_log and /var/log/everything.log to find what's wrong with the file in your system.
R.

ITouch mail won't work on my home network, works everywhere else.

My 2nd generation itouch's email won't work on my home network. I get a message that says something like "Unable to connect to Pop3 server." It works on other people's home networks, public networks, etc. Just not mine. I'm guessing my router / modem has a setting somewhere that is the problem. Verizon won't help me because it's a device problem, not an internet problem (their opinion). I have read all of the posts on the forum about this mail issue, but since it works everywhere else, I don't think it's an itouch issue. It's a Verizon Westell modem. thanks for any help.

I have had the same problem and just solved it. My home wireless is with ATT and they told me they have been receiving a lot of problems with users suddenly unable to gain access to wi-fi in their home. When we checked my wireless home connection the I.P address on my ITouch was incorrect. The prior IP address was not correct and 'somehow' got corrupted...no one knows how that happened. My cust service rep was excellent and walked me through renaming my wireless hardware as well as changing my channel - and it worked. we changed the name of my wireless modem/router, then changed the channel...to a different number than it was. You are correct in that the problem is with home service. my rep actually took me to an ip address ---numbers not a www address where we made the changes- I hope this helped. If I can be of assistance please let me know.

My Apple ID will not work in iMessage & Facetime. It works everywhere else. Any ideas. Thank you

My Apple ID will not work in iMessage & Facetime. It works everywhere else. Any ideas. Thank you

Facetime and iMessage seem to be issues on Apple's end, so not much you can do but wait for them to fix it.

Xoom 4G Works Everywhere but San Antonio

Similar Messages

Maybe you are looking for