Xorg 1.9 fails to initialize on a usb-installation of Arch [SOLVED]
As a side project, I decided to install Arch on a usb drive. I just installed Xorg (using the group).
Thus far, I've run xorg -configure, then moved the xorg.conf.new to /etc/X11/xorg.conf
I added in a "Synaptics" section, since this is on a laptop right now.
I'm using the "Vesa" device driver for maximum portability.
Upon starting X, using the default TWM as a test (and tried openbox as well), the screen goes black, comes back up, and then has multicolored, low-res artifacts all over the screen, not remotely resembling a desktop.
Upon switching to a different TTY, there is no prompt. All TTY's are left with a blinking underscore. The only way to get out of it is to hard reboot the machine.
I've already looked at the log, but saw nothing out of the ordinary at all. The last thing it said was that Synaptics was detected and loaded.
The Xorg.conf is also basically default. The only thing I changed was adding synaptics, then fiddling with the Vesa options trying to get it to work (neither option change worked).
Any clues, comrades?
Last edited by hwkiller (2010-11-06 22:02:04)
Well, that still failed.
Here is a picture of the artifacts (excuse the use of an actual camera, I'm unaware of any other way while in this situation)
http://imgur.com/yqkLv.jpg
I haven't tried another driver. The reason I'm using Vesa is to ensure portability if I want to use Arch on another computer. On this same computer I'm running Arch on an nvidia card with the proprietary driver, and it works fine.
Additionally, apparently if I set the vga= mode in GRUB, I can get back to terminal once X fails.
If I don't, x fails, and I cannot see the terminal. However, I can type in the terminal as though it works. I just have to relogin on a different tty and issue a reboot blindly.
My GRUB settings are cleared, xorg monitor settings are default all except for a specified driver and "NoMTRR". Not sure what else to do.
Another hint is that when X starts, sometimes it flashes what looks to be my laptop's POST and linux's startup text; perhaps something to do with the framebuffer?
Last edited by hwkiller (2010-11-06 17:45:03)
Similar Messages
-
Installer failed to initializ for CS5, windows 7
Had problems with CS5 Owl Orphanage errors. Uninstalled CS5 and now cannot re-install it because the Installer failed to initialize. Downloaded new installer from Adobe, but same thing is happening.
Try below steps and check once
Hold windows key on your keyboard and Press R key.
In Run window, type Appdata and click on Ok
Open Local > Adobe folders
Delete AAMUpdater and OOBE folders
Navigate to C:\Program Files (x86)\Common Files\Adobe
Delete Adobe Application Manager and OOBE folders
Install Adobe Application Manager from
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager : Thank You
Then try -
Firefox prompts update for shockwave flash. Downloaded installer but repeatedly fails at 50%, reads "failed to initialize." Redownloading the installer leads to the same result.
Hello, be sure that Firefox is closed (from File > Exit), before install Flash.
Also be sure to run the Flash installer as Administrator (right-click: Run as ...) to get access rights for installing the files. Any luck ?
thank you -
Download Error - Failed to initialize
I have been trying to load Flash player and I get an error "Failed to initialize" at what appears to be approximately 50% completion. Does anyone know what this is and what I can do to circumvent it?
Thanks,
WayneHi
Reason: Antivirus software from vendors like Comodo, Jiangmin, and Rising are incorrectly identifying the Adobe Flash Player installer as malware. False reports from these vendors include “TrojWare.Win32.Trojan.Agent.Gen,” “Trojan/JmGeneric.bcy,” and “Suspicious.” Users are also reporting “Failed to Initialize” errors and the installer is getting quarantined.
Workaround: Antivirus software vendors and service providers are currently addressing this issue so that the installer is recognized as being legitimate. Ensure that your antivirus signatures are up-to-date.
If the issue persists, use the direct links to download Flash Player installer. -
Xorg Problem - Failed to initialize the NVIDIA graphics device!
Hello.
I've encountered a problem while installing my Xorg server, which I'd like to use with KDE.
Here's the track of my xorg installation:
# sudo pacman -Syu
# sudo pacman -S xorg
(my graphic card is vVidia GeForce 8600 GT)
# sudo pacman -S nvidia-96xx nvidia-96xx-utils
# sudo nvidia-xconfig
(that's where I wanted to check if I did everything right)
#sudo startx
Xorg started loading and after a few secs it printed such output:
NVIDIA: could not open the devie file /dev/nvidia0 (Input/output error).
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:4:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usabe configuration.
Fatal server error:
no screens found
giving up.
xinit: Connection refused (errno 111): unable to connect to X server
xinit: No such process (errno3): Server error.
What should I do?matnik wrote:(my graphic card is vVidia GeForce 8600 GT)
# sudo pacman -S nvidia-96xx nvidia-96xx-utils
# sudo nvidia-xconfig
1. wrong driver. the 96xx driver is for horrible old hardware, like the gf4. Install 'nvidia' and 'nvidia-utils' instead.
2. don't use nvidia-xconfig, it's not needed.
3. reboot after installing the driver if you havn't disabled kms already. -
[Closed]Bumblebee - Failed to initialize the NVIDIA GPU
Hi,
I'am having trouble with bumblebee. When i ran
optirun glxgears -info
I get the following error,
[ 66.574]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 66.574] X Protocol Version 11, Revision 0
[ 66.574] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 66.574] Current Operating System: Linux archlinux 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
[ 66.574] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=2136b55a-3c0b-4a13-a536-86d195e15fa8 ro
[ 66.574] Build Date: 01 July 2013 10:48:42AM
[ 66.574]
[ 66.574] Current version of pixman: 0.30.0
[ 66.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 66.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 66.574] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Jul 30 19:25:29 2013
[ 66.589] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 66.589] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 66.607] (==) ServerLayout "Layout0"
[ 66.607] (==) No screen section available. Using defaults.
[ 66.607] (**) |-->Screen "Default Screen Section" (0)
[ 66.607] (**) | |-->Monitor "<default monitor>"
[ 66.607] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 66.607] (**) | |-->Device "DiscreteNvidia"
[ 66.607] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 66.607] (**) Option "AutoAddDevices" "false"
[ 66.607] (**) Option "AutoAddGPU" "false"
[ 66.607] (**) Not automatically adding devices
[ 66.607] (==) Automatically enabling devices
[ 66.607] (**) Not automatically adding GPU devices
[ 66.607] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 66.607] Entry deleted from font path.
[ 66.607] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 66.607] Entry deleted from font path.
[ 66.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 66.607] Entry deleted from font path.
[ 66.607] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 66.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 66.607] Entry deleted from font path.
[ 66.607] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 66.607] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 66.607] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 66.607] (==) |-->Input Device "<default pointer>"
[ 66.607] (==) |-->Input Device "<default keyboard>"
[ 66.607] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 66.607] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 66.607] (II) Loader magic: 0x7fdc20
[ 66.607] (II) Module ABI versions:
[ 66.607] X.Org ANSI C Emulation: 0.4
[ 66.607] X.Org Video Driver: 14.1
[ 66.607] X.Org XInput driver : 19.1
[ 66.607] X.Org Server Extension : 7.0
[ 66.607] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 66.608] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 66.608] setversion 1.4 failed
[ 66.609] (--) PCI:*(0:1:0:0) 10de:0fd4:1462:10d7 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 66.609] Initializing built-in extension Generic Event Extension
[ 66.609] Initializing built-in extension SHAPE
[ 66.609] Initializing built-in extension MIT-SHM
[ 66.609] Initializing built-in extension XInputExtension
[ 66.609] Initializing built-in extension XTEST
[ 66.609] Initializing built-in extension BIG-REQUESTS
[ 66.609] Initializing built-in extension SYNC
[ 66.609] Initializing built-in extension XKEYBOARD
[ 66.609] Initializing built-in extension XC-MISC
[ 66.609] Initializing built-in extension SECURITY
[ 66.609] Initializing built-in extension XINERAMA
[ 66.609] Initializing built-in extension XFIXES
[ 66.609] Initializing built-in extension RENDER
[ 66.609] Initializing built-in extension RANDR
[ 66.609] Initializing built-in extension COMPOSITE
[ 66.609] Initializing built-in extension DAMAGE
[ 66.609] Initializing built-in extension MIT-SCREEN-SAVER
[ 66.609] Initializing built-in extension DOUBLE-BUFFER
[ 66.609] Initializing built-in extension RECORD
[ 66.609] Initializing built-in extension DPMS
[ 66.609] Initializing built-in extension X-Resource
[ 66.609] Initializing built-in extension XVideo
[ 66.609] Initializing built-in extension XVideo-MotionCompensation
[ 66.609] Initializing built-in extension XFree86-VidModeExtension
[ 66.609] Initializing built-in extension XFree86-DGA
[ 66.609] Initializing built-in extension XFree86-DRI
[ 66.609] Initializing built-in extension DRI2
[ 66.609] (II) LoadModule: "glx"
[ 66.622] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 67.248] (II) Module glx: vendor="NVIDIA Corporation"
[ 67.248] compiled for 4.0.2, module version = 1.0.0
[ 67.248] Module class: X.Org Server Extension
[ 67.248] (II) NVIDIA GLX Module 319.32 Wed Jun 19 14:55:38 PDT 2013
[ 67.257] Loading extension GLX
[ 67.257] (II) LoadModule: "nvidia"
[ 67.258] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 67.346] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 67.346] compiled for 4.0.2, module version = 1.0.0
[ 67.346] Module class: X.Org Video Driver
[ 67.354] (II) LoadModule: "mouse"
[ 67.354] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 67.357] (II) Module mouse: vendor="X.Org Foundation"
[ 67.357] compiled for 1.14.0, module version = 1.9.0
[ 67.357] Module class: X.Org XInput Driver
[ 67.357] ABI class: X.Org XInput driver, version 19.1
[ 67.357] (II) LoadModule: "kbd"
[ 67.358] (WW) Warning, couldn't open module kbd
[ 67.358] (II) UnloadModule: "kbd"
[ 67.358] (II) Unloading kbd
[ 67.358] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 67.358] (II) NVIDIA dlloader X Driver 319.32 Wed Jun 19 14:34:12 PDT 2013
[ 67.358] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 67.359] (--) using VT number 7
[ 67.367] (II) Loading sub module "fb"
[ 67.367] (II) LoadModule: "fb"
[ 67.367] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 67.367] (II) Module fb: vendor="X.Org Foundation"
[ 67.368] compiled for 1.14.2, module version = 1.0.0
[ 67.368] ABI class: X.Org ANSI C Emulation, version 0.4
[ 67.368] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 67.368] (II) Loading sub module "wfb"
[ 67.368] (II) LoadModule: "wfb"
[ 67.368] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 67.376] (II) Module wfb: vendor="X.Org Foundation"
[ 67.376] compiled for 1.14.2, module version = 1.0.0
[ 67.377] ABI class: X.Org ANSI C Emulation, version 0.4
[ 67.377] (II) Loading sub module "shadow"
[ 67.377] (II) LoadModule: "shadow"
[ 67.377] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 67.377] (II) Module shadow: vendor="X.Org Foundation"
[ 67.377] compiled for 1.14.2, module version = 1.1.0
[ 67.377] ABI class: X.Org ANSI C Emulation, version 0.4
[ 67.377] (II) Loading sub module "ramdac"
[ 67.377] (II) LoadModule: "ramdac"
[ 67.377] (II) Module "ramdac" already built-in
[ 67.378] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 67.378] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 67.378] (==) NVIDIA(0): RGB weight 888
[ 67.378] (==) NVIDIA(0): Default visual is TrueColor
[ 67.378] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 67.378] (**) NVIDIA(0): Option "NoLogo" "true"
[ 67.378] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 67.379] (**) NVIDIA(0): Option "UseEDID" "false"
[ 67.379] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 67.379] (**) NVIDIA(0): Enabling 2D acceleration
[ 67.379] (**) NVIDIA(0): Ignoring EDIDs
[ 67.379] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 67.379] (**) NVIDIA(0): mode
[ 72.511] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 72.511] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 72.511] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 72.511] (EE) NVIDIA(0): README for additional information.
[ 72.511] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 72.511] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 72.512] (II) UnloadModule: "nvidia"
[ 72.512] (II) UnloadSubModule: "shadow"
[ 72.512] (II) UnloadSubModule: "wfb"
[ 72.512] (II) UnloadSubModule: "fb"
[ 72.512] (EE) Screen(s) found, but none have a usable configuration.
[ 72.512] (EE)
Fatal server error:
[ 72.512] (EE) no screens found(EE)
[ 72.512] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 72.512] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 72.512] (EE)
[ 72.512] (EE) Server terminated with error (1). Closing log file.
This is /etc/bumblebee/bumblebee.conf file;
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
In addition
dmesg | grep nvidia
does not return anything and
modprobe nvidia
returns
modprobe: ERROR: could not insert 'nvidia': No such device
There is no /etc/X11/xorg.conf file.
Last edited by Selo (2013-07-30 19:41:25)Hello, I also I have that problem.
$primusrun glxgears
primus: fatal: Bumblebee daemon reported: error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
$grep -Fn '(EE' /var/log/Xorg.8.log
15: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
105:[ 875.659] (EE) Failed to load module "mouse" (module does not exist, 0)
110:[ 875.659] (EE) Failed to load module "kbd" (module does not exist, 0)
153:[ 880.312] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
154:[ 880.312] (EE) NVIDIA(0): check your system's kernel log for additional error
155:[ 880.312] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
156:[ 880.312] (EE) NVIDIA(0): README for additional information.
157:[ 880.312] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
158:[ 880.312] (EE) NVIDIA(0): Failing initialization of X screen 0
163:[ 880.312] (EE) Screen(s) found, but none have a usable configuration.
164:[ 880.312] (EE)
166:[ 880.312] (EE) no screens found(EE)
167:[ 880.312] (EE)
171:[ 880.312] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
172:[ 880.313] (EE)
173:[ 880.313] (EE) Server terminated with error (1). Closing log file. -
[Solved] Failed to initialize the NVIDIA kernel module
Hi all,
I've just made the jump to arch and have a fresh install. I'm having trouble getting the nvidia drivers to work. I am currently using the nouveau drivers without issue.
The method I am using - after much trial - is:
- uninstall nouveau and mesa lib
- install nvidia package
- remove nouveau module entry in mkinitcpio.conf
- run `mkinitcpio -p linux`
- edit .conf in xorg.conf.d with minimal required settings. Currently:
Section "Device"
Identifier "device0"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
I have installed the linux-headers package and tried reinstalling nvidia again
Card:
01:00.0 VGA compatible controller: NVIDIA Corporation GF106 [GeForce GTS 450] (rev a1)
Kernel:
3.12.6-1-ARCH
My Xorg.0.log looks like:
[ 3.979]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 3.979] X Protocol Version 11, Revision 0
[ 3.979] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 3.979] Current Operating System: Linux arch.tempera 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
[ 3.979] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
[ 3.979] Build Date: 13 December 2013 03:11:42PM
[ 3.979]
[ 3.979] Current version of pixman: 0.32.4
[ 3.979] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 3.979] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.979] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 4 21:29:46 2014
[ 3.980] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3.980] (==) No Layout section. Using the first Screen section.
[ 3.980] (==) No screen section available. Using defaults.
[ 3.980] (**) |-->Screen "Default Screen Section" (0)
[ 3.980] (**) | |-->Monitor "<default monitor>"
[ 3.981] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 3.981] (**) | |-->Device "device0"
[ 3.981] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.981] (==) Automatically adding devices
[ 3.981] (==) Automatically enabling devices
[ 3.981] (==) Automatically adding GPU devices
[ 3.984] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3.984] Entry deleted from font path.
[ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.984] Entry deleted from font path.
[ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.984] Entry deleted from font path.
[ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.984] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 3.984] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.984] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.984] (II) Loader magic: 0x7fec20
[ 3.984] (II) Module ABI versions:
[ 3.984] X.Org ANSI C Emulation: 0.4
[ 3.984] X.Org Video Driver: 14.1
[ 3.984] X.Org XInput driver : 19.1
[ 3.984] X.Org Server Extension : 7.0
[ 3.985] (--) PCI:*(0:1:0:0) 10de:0dc4:19da:1184 rev 161, Mem @ 0xf4000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.986] Initializing built-in extension Generic Event Extension
[ 3.986] Initializing built-in extension SHAPE
[ 3.986] Initializing built-in extension MIT-SHM
[ 3.986] Initializing built-in extension XInputExtension
[ 3.986] Initializing built-in extension XTEST
[ 3.986] Initializing built-in extension BIG-REQUESTS
[ 3.986] Initializing built-in extension SYNC
[ 3.986] Initializing built-in extension XKEYBOARD
[ 3.986] Initializing built-in extension XC-MISC
[ 3.986] Initializing built-in extension SECURITY
[ 3.986] Initializing built-in extension XINERAMA
[ 3.986] Initializing built-in extension XFIXES
[ 3.986] Initializing built-in extension RENDER
[ 3.986] Initializing built-in extension RANDR
[ 3.986] Initializing built-in extension COMPOSITE
[ 3.986] Initializing built-in extension DAMAGE
[ 3.986] Initializing built-in extension MIT-SCREEN-SAVER
[ 3.986] Initializing built-in extension DOUBLE-BUFFER
[ 3.986] Initializing built-in extension RECORD
[ 3.986] Initializing built-in extension DPMS
[ 3.986] Initializing built-in extension X-Resource
[ 3.986] Initializing built-in extension XVideo
[ 3.986] Initializing built-in extension XVideo-MotionCompensation
[ 3.986] Initializing built-in extension XFree86-VidModeExtension
[ 3.986] Initializing built-in extension XFree86-DGA
[ 3.986] Initializing built-in extension XFree86-DRI
[ 3.986] Initializing built-in extension DRI2
[ 3.986] (II) LoadModule: "glx"
[ 3.989] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.075] (II) Module glx: vendor="NVIDIA Corporation"
[ 4.075] compiled for 4.0.2, module version = 1.0.0
[ 4.075] Module class: X.Org Server Extension
[ 4.075] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 4.076] Loading extension GLX
[ 4.076] (II) LoadModule: "nvidia"
[ 4.076] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4.082] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4.082] compiled for 4.0.2, module version = 1.0.0
[ 4.082] Module class: X.Org Video Driver
[ 4.083] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 4.083] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4.083] (++) using VT number 7
[ 4.090] (II) Loading sub module "fb"
[ 4.090] (II) LoadModule: "fb"
[ 4.090] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.091] (II) Module fb: vendor="X.Org Foundation"
[ 4.091] compiled for 1.14.5, module version = 1.0.0
[ 4.091] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.091] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 4.091] (II) Loading sub module "wfb"
[ 4.091] (II) LoadModule: "wfb"
[ 4.091] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4.092] (II) Module wfb: vendor="X.Org Foundation"
[ 4.092] compiled for 1.14.5, module version = 1.0.0
[ 4.092] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.092] (II) Loading sub module "ramdac"
[ 4.092] (II) LoadModule: "ramdac"
[ 4.092] (II) Module "ramdac" already built-in
[ 4.093] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.093] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4.093] (==) NVIDIA(0): RGB weight 888
[ 4.093] (==) NVIDIA(0): Default visual is TrueColor
[ 4.093] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.094] (**) NVIDIA(0): Enabling 2D acceleration
[ 4.095] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
[ 4.095] (EE) NVIDIA(0): system's kernel log for additional error messages and
[ 4.095] (EE) NVIDIA(0): consult the NVIDIA README for details.
[ 4.095] (EE) NVIDIA(0): *** Aborting ***
[ 4.095] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 4.095] (II) UnloadModule: "nvidia"
[ 4.095] (II) UnloadSubModule: "wfb"
[ 4.095] (II) UnloadSubModule: "fb"
[ 4.095] (EE) Screen(s) found, but none have a usable configuration.
[ 4.095] (EE)
Fatal server error:
[ 4.095] (EE) no screens found(EE)
[ 4.095] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 4.095] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4.095] (EE)
[ 4.107] (EE) Server terminated with error (1). Closing log file.
The only entry I found in `dmesg | grep nvidia` related to nvidia-drm, and seemed to say it was loaded successfully. I didn't save the exact entry and i've reinstalled nouveau now so that I could post this.
Any help much appriciated. I've been at this for a while. Learning a lot in the process!
Last edited by gnibbler (2014-01-04 22:31:49)Success! Several days of trying various things and I finally give in and make a post to this forum. One more attempt - which was only really so that I could add modprobe info to this post - and it works.
I had at some stage installed the driver xf86-video-nv, and this may have been causing the clash. I un-installed it, and followed the procedure above to reinstall nvidia.
I think the main hang up I'd had is that I had not been rebuilding my kernel image with mkinitcpio after installing nvidia during my previous attempts.
I hope some info in here helps some other stuck archer.
Edit: Thanks graysky. I had found the right nvidia driver using the arch wiki and followed this advice to remove the nouveau hook. Much appriciated.
Last edited by gnibbler (2014-01-04 22:35:00) -
[SOLVED] Bumblebee: Failed to initialize GPU with Lenovo ThinkPad W530
SOLVED: See post #20
After years, I decided to come back to the wonderful distro, Arch and back to the forums. Yay!
However, I installed Arch to my new laptop - Lenovo ThinkPad W530 and it uses NVIDIA Quadro K1000M alongside Intel graphics with Optimus technology. Arch is running fine, but I cannot run applications through optirun and I get:
[exitium@rambutan ~]$ optirun -vv nvidia-settings
[ 485.536478] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 485.536909] [DEBUG]optirun version 3.2.1 starting...
[ 485.536922] [DEBUG]Active configuration:
[ 485.536927] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 485.536931] [DEBUG] X display: :8
[ 485.536934] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 485.536938] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 485.536941] [DEBUG] Accel/display bridge: auto
[ 485.536945] [DEBUG] VGL Compression: proxy
[ 485.536948] [DEBUG] VGLrun extra options:
[ 485.536952] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 485.536972] [DEBUG]Using auto-detected bridge virtualgl
[ 485.537190] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 485.537204] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 485.537209] [DEBUG]Socket closed.
[ 485.537223] [ERROR]Aborting because fallback start is disabled.
[ 485.537229] [DEBUG]Killing all remaining processes.
As seen, it says "Failed to initialize the NVIDIA GPU". I have tried different solutions found from these forums and several other places but none of them have worked - the problem remains same. Does anyone have idea how I could fix this? I read somewhere else that there could be issues with newest nvidia drivers - is this possible?
bumblebee.conf:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
Option "UseDisplayDevice" "none"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
Thank you in advance!
Last edited by Exitium (2013-12-18 11:29:54)Hi!
Exactly the same issue here. Notebook -> Thinkpad W530
Currently running on:
linux 3.11.3-1
nvidia 325.15-8
nvidia-utils 325.15-1
bbswitch 0.7-14
Error:
username@hostname ~ $ optirun -vv nvidia-settings
[ 839.449203] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 839.449495] [INFO]Configured driver: nvidia
[ 839.449729] [DEBUG]optirun version 3.2.1 starting...
[ 839.449774] [DEBUG]Active configuration:
[ 839.449817] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 839.449836] [DEBUG] X display: :8
[ 839.449856] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 839.449875] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 839.449890] [DEBUG] Accel/display bridge: auto
[ 839.449909] [DEBUG] VGL Compression: proxy
[ 839.449936] [DEBUG] VGLrun extra options:
[ 839.449953] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 839.449996] [DEBUG]Using auto-detected bridge virtualgl
[ 839.450294] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 839.450344] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 839.450373] [DEBUG]Socket closed.
[ 839.450398] [ERROR]Aborting because fallback start is disabled.
[ 839.450419] [DEBUG]Killing all remaining processes.
dmesg output:
[ 81.162604] bbswitch: enabling discrete graphics
[ 81.396637] pci 0000:01:00.0: power state changed by ACPI to D0
[ 81.396663] thinkpad_acpi: EC reports that Thermal Table has changed
[ 81.483200] nvidia: module license 'NVIDIA' taints kernel.
[ 81.483205] Disabling lock debugging due to kernel taint
[ 81.488096] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 81.488289] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[ 81.488294] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 325.15 Wed Jul 31 18:50:56 PDT 2013
[ 81.665938] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
[ 81.670434] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670528] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670594] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670659] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670723] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670960] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.671192] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.671258] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.879826] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.905471] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
[ 85.905479] NVRM: os_pci_init_handle: invalid context!
[ 85.905481] NVRM: os_pci_init_handle: invalid context!
[ 85.905486] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
[ 85.905490] NVRM: os_pci_init_handle: invalid context!
[ 85.905491] NVRM: os_pci_init_handle: invalid context!
[ 85.930135] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.930442] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.930719] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.930990] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.931258] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.931526] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.931794] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.932062] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.932329] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.932595] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.932862] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.933129] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.933396] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.933662] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.933942] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.934197] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.934452] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.934706] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.934960] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.935215] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.935469] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.935722] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.935976] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.940508] NVRM: RmInitAdapter failed! (0x25:0x28:1157)
[ 85.940517] NVRM: rm_init_adapter(0) failed
xorg.conf.nvidia:
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
bumblebee.conf:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bu … PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau -
[Bumblebee]Failed to initialize the NVIDIA GPU at PCI:1:0:0.
Hi!
I've instaled Arch about a month ago and now wanted to check my nvidia card using Bumblebee, but have some errors…
[wicu@arch:~]$ optirun -vv minecraft
[ 4859.259278] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 4859.404191] [DEBUG]optirun version 3.0.1 starting...
[ 4859.404220] [DEBUG]Active configuration:
[ 4859.404226] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 4859.404242] [DEBUG] X display: :8
[ 4859.404254] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
[ 4859.404265] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 4859.404276] [DEBUG] VGL Compression: proxy
[ 4859.536971] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 4859.537027] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 4859.537053] [DEBUG]Socket closed.
[ 4859.537086] [ERROR]Aborting because fallback start is disabled.
[ 4859.537094] [DEBUG]Killing all remaining processes.
[wicu@arch:~]$ sudo journalctl // here is only part when I tried use bumblebee
Nov 26 17:48:43 arch kernel: NVRM: failed to copy vbios to system memory.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238670] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238729] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238765] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238819] [ERROR][XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238826] [ERROR][XORG] (EE) NVIDIA(0): check your system's kernel log for additional error
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238830] [ERROR][XORG] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238835] [ERROR][XORG] (EE) NVIDIA(0): README for additional information.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238841] [ERROR][XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238847] [ERROR][XORG] (EE) NVIDIA(0): Failing initialization of X screen 0
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238853] [ERROR][XORG] (EE) Screen(s) found, but none have a usable configuration.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238858] [ERROR][XORG] (EE)
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238863] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238868] [ERROR][XORG] (EE)
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238873] [ERROR]X did not start properly
Nov 26 17:48:43 arch kernel: NVRM: RmInitAdapter failed! (0x30:0xffffffff:739)
Nov 26 17:48:43 arch kernel: NVRM: rm_init_adapter(0) failed
// xorg log
[ 4859.510]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 4859.511] X Protocol Version 11, Revision 0
[ 4859.511] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 4859.511] Current Operating System: Linux arch 3.6.7-1-ARCH #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012 x86_64
[ 4859.511] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70a6cff9-bcf7-42eb-9ba1-73953e023617 ro quiet
[ 4859.511] Build Date: 08 November 2012 07:09:29PM
[ 4859.511]
[ 4859.511] Current version of pixman: 0.28.0
[ 4859.511] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4859.511] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4859.511] (==) Log file: "/var/log/Xorg.8.log", Time: Mon Nov 26 18:00:43 2012
[ 4859.511] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 4859.511] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4859.511] (==) ServerLayout "Layout0"
[ 4859.512] (==) No screen section available. Using defaults.
[ 4859.512] (**) |-->Screen "Default Screen Section" (0)
[ 4859.512] (**) | |-->Monitor "<default monitor>"
[ 4859.512] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 4859.512] (**) | |-->Device "Device1"
[ 4859.512] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4859.512] (**) Option "AutoAddDevices" "false"
[ 4859.512] (**) Not automatically adding devices
[ 4859.512] (==) Automatically enabling devices
[ 4859.512] (==) Automatically adding GPU devices
[ 4859.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4859.512] Entry deleted from font path.
[ 4859.512] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4859.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4859.512] Entry deleted from font path.
[ 4859.512] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4859.512] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 4859.512] (++) ModulePath set to "/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules"
[ 4859.512] (==) |-->Input Device "<default pointer>"
[ 4859.512] (==) |-->Input Device "<default keyboard>"
[ 4859.512] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 4859.512] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 4859.512] (II) Loader magic: 0x7fcc40
[ 4859.512] (II) Module ABI versions:
[ 4859.512] X.Org ANSI C Emulation: 0.4
[ 4859.513] X.Org Video Driver: 13.1
[ 4859.513] X.Org XInput driver : 18.0
[ 4859.513] X.Org Server Extension : 7.0
[ 4859.513] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4859.513] setversion 1.4 failed
[ 4859.516] (--) PCI:*(0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 4859.516] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4859.516] Initializing built-in extension Generic Event Extension
[ 4859.516] Initializing built-in extension SHAPE
[ 4859.516] Initializing built-in extension MIT-SHM
[ 4859.516] Initializing built-in extension XInputExtension
[ 4859.516] Initializing built-in extension XTEST
[ 4859.516] Initializing built-in extension BIG-REQUESTS
[ 4859.516] Initializing built-in extension SYNC
[ 4859.516] Initializing built-in extension XKEYBOARD
[ 4859.516] Initializing built-in extension XC-MISC
[ 4859.516] Initializing built-in extension SECURITY
[ 4859.516] Initializing built-in extension XINERAMA
[ 4859.516] Initializing built-in extension XFIXES
[ 4859.516] Initializing built-in extension RENDER
[ 4859.516] Initializing built-in extension RANDR
[ 4859.516] Initializing built-in extension COMPOSITE
[ 4859.516] Initializing built-in extension DAMAGE
[ 4859.516] Initializing built-in extension MIT-SCREEN-SAVER
[ 4859.516] Initializing built-in extension DOUBLE-BUFFER
[ 4859.516] Initializing built-in extension RECORD
[ 4859.516] Initializing built-in extension DPMS
[ 4859.516] Initializing built-in extension X-Resource
[ 4859.516] Initializing built-in extension XVideo
[ 4859.516] Initializing built-in extension XVideo-MotionCompensation
[ 4859.516] Initializing built-in extension XFree86-VidModeExtension
[ 4859.516] Initializing built-in extension XFree86-DGA
[ 4859.516] Initializing built-in extension XFree86-DRI
[ 4859.516] Initializing built-in extension DRI2
[ 4859.516] (II) LoadModule: "glx"
[ 4859.516] (II) Loading /usr/lib/nvidia-bumblebee/xorg/modules/extensions/libglx.so
[ 4859.526] (II) Module glx: vendor="NVIDIA Corporation"
[ 4859.526] compiled for 4.0.2, module version = 1.0.0
[ 4859.526] Module class: X.Org Server Extension
[ 4859.526] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012
[ 4859.526] Loading extension GLX
[ 4859.526] (II) LoadModule: "nvidia"
[ 4859.526] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4859.526] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4859.526] compiled for 4.0.2, module version = 1.0.0
[ 4859.526] Module class: X.Org Video Driver
[ 4859.526] (II) LoadModule: "mouse"
[ 4859.527] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 4859.527] (II) Module mouse: vendor="X.Org Foundation"
[ 4859.527] compiled for 1.13.0, module version = 1.8.1
[ 4859.527] Module class: X.Org XInput Driver
[ 4859.527] ABI class: X.Org XInput driver, version 18.0
[ 4859.527] (II) LoadModule: "kbd"
[ 4859.527] (WW) Warning, couldn't open module kbd
[ 4859.527] (II) UnloadModule: "kbd"
[ 4859.527] (II) Unloading kbd
[ 4859.527] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 4859.527] (II) NVIDIA dlloader X Driver 310.19 Thu Nov 8 00:53:33 PST 2012
[ 4859.527] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4859.527] (--) using VT number 7
[ 4859.527] (II) Loading sub module "wfb"
[ 4859.527] (II) LoadModule: "wfb"
[ 4859.527] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4859.527] (II) Module wfb: vendor="X.Org Foundation"
[ 4859.527] compiled for 1.13.0, module version = 1.0.0
[ 4859.527] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4859.527] (II) Loading sub module "ramdac"
[ 4859.527] (II) LoadModule: "ramdac"
[ 4859.527] (II) Module "ramdac" already built-in
[ 4859.527] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4859.527] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4859.527] (==) NVIDIA(0): RGB weight 888
[ 4859.527] (==) NVIDIA(0): Default visual is TrueColor
[ 4859.527] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4859.527] (**) NVIDIA(0): Option "NoLogo" "true"
[ 4859.528] (**) NVIDIA(0): Option "UseEDID" "false"
[ 4859.528] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
[ 4859.528] (**) NVIDIA(0): Enabling 2D acceleration
[ 4859.528] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
[ 4859.528] (**) NVIDIA(0): Ignoring EDIDs
[ 4859.534] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 4859.534] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 4859.534] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 4859.534] (EE) NVIDIA(0): README for additional information.
[ 4859.534] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 4859.534] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 4859.534] (II) UnloadModule: "nvidia"
[ 4859.534] (II) UnloadSubModule: "wfb"
[ 4859.534] (EE) Screen(s) found, but none have a usable configuration.
[ 4859.534]
Fatal server error:
[ 4859.534] no screens found
[ 4859.534] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4859.534] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 4859.534] (EE)
[ 4859.534] Server terminated with error (1). Closing log file.
[wicu@arch:~]$ lspci | grep VGA
3:00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
14:01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
[wicu@arch:~]$ primusrun minecraft
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
asdf
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
27 achievements
208 recipes
Setting user: Druedain, -4246576297828159265
primus: fatal: failure contacting bumblebee daemon
[18:05:39 - wicu@arch:~]$ primusrun minecraft
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
asdf
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
27 achievements
208 recipes
Setting user: Druedain, -7896572405277476304
primus: fatal: failure contacting bumblebee daemon
[wicu@arch:~]$ systemctl | grep bumblebee
35:bumblebeed.service[wicu@arch:~]$ dmesg | grep nvidia
782:[ 6.776816] nvidia: module license 'NVIDIA' taints kernel.
784:[ 6.784411] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[wicu@arch:~]$ cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
## Client options. Will take effect on the next optirun executed.
[optirun]
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
Module=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
[wicu@arch:~]$ cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "ConnectedMonitor" "DFP"
EndSection -
Failed to initialize for relative axes
Is there a way to prevent xorg from registering keyboards as mice? Whenever I run xinit, I get:
(EE) Logitech Logitech Illuminated Keyboard: failed to initialize for relative axes.
Harmless, but mildly annoying. Relevant log:
[ 8902.107] (--) Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
[ 8902.107] (--) Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[ 8902.107] (--) Logitech Logitech Illuminated Keyboard: Found relative axes
[ 8902.107] (--) Logitech Logitech Illuminated Keyboard: Found absolute axes
[ 8902.107] (--) Logitech Logitech Illuminated Keyboard: Found keys
[ 8902.107] (II) Logitech Logitech Illuminated Keyboard: Configuring as mouse
[ 8902.107] (II) Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 8902.107] (II) Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[ 8902.107] (**) Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[ 8902.107] (**) Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
It's also very hard to get hits on Google, as the message appears in pretty much everyone's logs.Yeah, I've been baffled by this as well. I know it's not exactly useful, but I was plagued by these for some time and then with the last update to xorg they just disappeared. (Along with the much more annoying behaviour of scrolling through countless screen modes before finally starting X.)
-
Configuration system failed to initialize
Getting error when I try to install an excel addin that I have published.
Error message is "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
To publish the addin I use the publish option on the build menu of VS2013.
Specify the location to publish this application: F:\publish where F: is a USB drive.
What is the default installation path on end user computers: From a CD-ROM or DVD-ROM
Then I take the USB drive to another PC, double click on setup.exe in the USB drive and get the "configuration system failed to initialize" error. I copy the entire publish directory to the C: drive of the target system and get the same error.
What am I doing wrong?
thanks,Hi Steve,
>>Error message is "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
For this issue, I would recommend you try to uninstall/reinstall the VSTO runtime. The link below might be useful to you:
#Customization could not be loaded because the application domain could not be created.
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/d8204b2f-d5c7-42b3-b339-d2d37d43652d/customization-could-not-be-loaded-because-the-application-domain-could-not-be-created?forum=vsto
If the method above do not work, I will recommend you install the excel add-in in the developing machine with the USB to check whether it could work correctly. If it could not install correctly, I assume that there might be something wrong when you
publish, and could you share us the steps you published? If it works correctly, I assume that it caused by the environment of another pc, it would be helpful if you could share us the screen shoot about details error message.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
The error "configuration system failed to initialize" occurred
Hi
When I converted and built the solution file that was developed by Visual Studio .net 2003 using Visual Studio 2005, the application program was abnormal-ended at the following step:
m_TCPChannel = New System.Runtime.Remoting.Channels.Tcp.TcpChannel(tcp_properties, Nothing, Nothing)
The error message was "configration system failed to initialize". The Exception.ToString said that the root <configuration> tag was not included in the configuration file. Therefore, I changed <configopt> tag to <configuration>
tag in the app.config file of the target project, and then executed again. Next time, the application program was abnormal-ended by the unrecognized section <xs:schema>. Therefore, I changed the app.config file to the simple one (only <configuration>
and </configuration> tags), and then executed again. The error didn't occur. I guess that it's caused by configuration settings. Please advise.
app.config file:
<?xml version="1.0" standalone="yes"?>
<configopt>
<xs:schema id="configopt" xmlns="" xmlns:xs="URLリンク" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xs:element name="configopt" msdata:IsDataSet="true" msdata:Locale="en-AU">
<xs:complexType>
<xs:choice maxOccurs="unbounded">
<xs:element name="Environment">
<xs:complexType>
<xs:sequence>
<xs:element name="Name" type="xs:string" minOccurs="0" />
<xs:element name="System" type="xs:string" minOccurs="0" />
<xs:element name="DataLibrary" type="xs:string" minOccurs="0" />
<xs:element name="Default" type="xs:boolean" minOccurs="0" />
<xs:element name="UserId" type="xs:string" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
<Environment>
<Name>Test</Name>
<System>XXXX.COM</System>
<DataLibrary>XXXTEST</DataLibrary>
<Default>false</Default>
<UserId></UserId>
</Environment>
<Environment>
<Name>Production</Name>
<System>XXXXX.COM</System>
<DataLibrary>XXXPROD</DataLibrary>
<Default>true</Default>
<UserId />
</Environment>
</configopt>Hi,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Since your issue occurred on the converted project from VS .net 2003 to VS2005, and VS2005 is out of
our mainstream support , I suggest that you should consult on some development forums to check whether they will to provide some suggestions or
submit a support ticket to below site,
https://support.microsoft.com/oas/default.aspx?Gprid=1117&st=1&wfxredirect=1&sd=gn&wfxredirect=1
Thank you for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
"Configuration system failed to initialize" when trying to connect FM12 to Sharepoint
Adding a connection to Sharepoint using the FM12 CMS Connection Manager is failing with the error "Configuration system failed to initialize". I can access all the sites and libraries in Sharepoint perfectly from IE on the same PC, but no matter what I try in the FM12 Connection Manager I get the above mentioned error. The PC (which is actually a VM) is running Windows Server 2008 R2 (x64 with heaps of RAM and HDD free) with all updates applied. FM12 is installed as part of Technical Comms Suite 5 subscription.
Does anyone have any ideas what may be causing this (or what it even means) and how I can fix it?Hi Steve,
>>Error message is "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
For this issue, I would recommend you try to uninstall/reinstall the VSTO runtime. The link below might be useful to you:
#Customization could not be loaded because the application domain could not be created.
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/d8204b2f-d5c7-42b3-b339-d2d37d43652d/customization-could-not-be-loaded-because-the-application-domain-could-not-be-created?forum=vsto
If the method above do not work, I will recommend you install the excel add-in in the developing machine with the USB to check whether it could work correctly. If it could not install correctly, I assume that there might be something wrong when you
publish, and could you share us the steps you published? If it works correctly, I assume that it caused by the environment of another pc, it would be helpful if you could share us the screen shoot about details error message.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
CS5.5 Design Premium: installer failed to initialize
Ok, I'm having this problem. This started because I had to perform a system restore. I ended having to go back so far with the system restore that all of my Adobe Products(among others) no longer appeared to be installed.
So I downloaded Adobe CS5.5 Design premium from a link mentioned elsewhere in the discussions. Everything extracts fine, but when I execute the installer it always prompts "installer failed to initialize". I have downloaded the Adobe support advisor. It shows multiple:
cpsid_82829s1: "A restart is pending," bootstrapper error has occurred.
Click here for details and corrective actions related to this issue.
I have clicked the links(http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-bootstrapper-cs5.html) below and followed the instructions. There is no "InProgress" Entry in the registry in the locations provided. I have also ran the "Adobe CS5 Cleaner Tool " Multiple times and have removed ALL. I have deleted every directory on this computer that says Adobe.
This is a clients computer and we REALLY don't want to wipe and reload(Money/time and all that). Can anyone help me with this error?System restore is a first resort for most people when there is a problem in Windows. Obviously it wasn't a hit in this situation. I know a wipe and reload would fix it. If you read my post you'd see I'm trying to avoid that. If you have any information that can help me there I would love to know it.
-
Failed to initialize the application 'soa-infra' for SOA suite 11g
Hello experts!
Having followed the steps in http://www.packtpub.com/article/installation-configuration-oracle-soa-suite-11g-1,
upon starting the cmd scripts, I received among others the following error message:
<BEA-149205> <Failed to initialize the application 'soa-infra' due to error java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;.
java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;
at oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener.preStart(JpsApplicationLifecycleListener.java:76)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:277)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:194)
at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:57)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:279)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:609)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:53)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.lang.NoSuchMethodError:
I have searched but only to find a change permissions hint which did not work for me. SOA 11g - SOA-INFRA is not starting
Any helping hand available?
Thank you very much in advance!
The fuller log follows:
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <WebLogicServer> <Hera> <> <main> <> <> <> <1270482051581> <BEA-000214> <WebLogic Server "soa_server1" version:
WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Notice> <Log Management> <Hera> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1270482051644> <BEA-170019> <The server log file C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\logs\soa_server1.log is opened. All server side log events will be written to this file.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Log Management> <Hera> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1270482051644> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Diagnostics> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051691> <BEA-320001> <The ServerDebug service initialized successfully.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Store> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051753> <BEA-280050> <Persistent store "WLS_DIAGNOSTICS" opened: directory="C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\data\store\diagnostics" writePolicy="Disabled" blockSize=512 directIO=false driver="wlfileio2">
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "t3" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "t3s" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "http" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "https" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "iiop" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "iiops" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "ldap" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "ldaps" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "cluster" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "clusters" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002622> <The protocol "snmp" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002622> <The protocol "admin" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <RJVM> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051862> <BEA-000570> <Network Configuration for Channel "soa_server1"
Listen Address :8001
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051878> <BEA-002609> <Channel Service initialized.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051878> <BEA-000406> <NTSocketMuxer was built on Jan 13 2005 17:47:03
>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051941> <BEA-000436> <Allocating 5 reader threads.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051942> <BEA-000446> <Native IO Enabled.>
####<5 Απρ 2010 6:40:52 μμ EEST> <Info> <IIOP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482052098> <BEA-002014> <IIOP subsystem enabled.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053408> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053704> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053751> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_VFJSY8asFO+H8NVntiPFSkiIk0o=>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053923> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053985> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Top".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.DomainRealmScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.RegistryScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKITypeScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLTypeScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Credential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.CredentialMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLAssertingParty".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLRelyingParty".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.UserPasswordCredential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredentialMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.ResourceMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKIResourceMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCertRegEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCredMapCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSPolicyCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSRoleCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLAuthorizationPolicy".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLRoleAssignmentPolicy".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Endpoint".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Partner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SPPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.IdPPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SAML2CacheEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SchemaVersion".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054453> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054469> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054578> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server soa_server1 for security realm myrealm.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Notice> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054578> <BEA-090082> <Security initializing using security realm myrealm.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054750> <BEA-002622> <The protocol "[snmp, https, t3, cluster-broadcast-secure, ldaps, cluster-broadcast, ldap, http, iiop, admin, t3s, iiops]" is now configured.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <XML> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054750> <BEA-130036> <Initializing XMLRegistry.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <messaging.interception> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054765> <BEA-400000> <Initializing message interception service>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Store> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055015> <BEA-280050> <Persistent store "_WLS_soa_server1" opened: directory="C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\data\store\default" writePolicy="Direct-Write" blockSize=512 directIO=true driver="wlfileio2">
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001135> <Initializing the JDBC service.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001137> <Initialization complete.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001138> <Resuming the JDBC service.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001140> <Resume complete.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Connector> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055264> <BEA-190000> <Initializing J2EE Connector Service>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Connector> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055280> <BEA-190001> <J2EE Connector Service initialized successfully>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055327> <BEA-040305> <JMS service is initialized and in standby mode.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055342> <BEA-040090> <Deployed 8 default connection factories.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory1" with its JNDI name "weblogic.jms.XAConnectionFactory1" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040306> <JMS service is active now.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055389> <BEA-101128> <Initializing HTTP services.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101135> <soa_server1 is the default Web server.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101052> <[HttpServer (defaultWebserver) name: soa_server1] Initialized>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101129> <Initializing the Web application container.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: Logging service enabled.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Task Manager instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC security service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Transaction service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebService> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055436> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebService> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055436> <BEA-220027> <Web Service reliable agents are started on the server.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMX> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055467> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://192.168.1.2:8001/jndi/weblogic.management.mbeanservers.runtime .>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055483> <BEA-000256> <Invoking oracle.jrf.wls.JRFStartup.main(null)>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055514> <BEA-000256> <Invoking oracle.security.jps.wls.JpsWlsStartupClass.main(null)>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055530> <BEA-000256> <Invoking oracle.core.ojdl.weblogic.ODLConfiguration.main(null)>
####<5 Απρ 2010 6:40:56 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482056684> <BEA-000256> <Invoking oracle.jrf.AppContextStartup.main(null)>
####<5 Απρ 2010 6:40:56 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] EThank you for your reply!
The tutorial emphasizes that I need jdk 1.6 update 11 in order to setup.
The newer release of wl server comes with jsk 1.6 update 14.
When I tried to run:
setup -jreLoc C:\Oracle\Middleware\home_11gR1\jdk160_14
no setup screen appeared.
Next, I setup stand alone jdk 1.6 update 11 and add it to path,
but setup -jreLoc C:\Program Files\Java\jdk1.6.0_11 failed too, since no setup screen appeared
So I uninstalled version 10.3.2, installed 10.3.1 to follow exactly the tutorial specs.
Does one has to pay oracle consulting, in order to have an installation of soa suite up and running for development?
Edited by: Nick Aiva on Apr 6, 2010 11:27 AM
Maybe you are looking for
-
IB- Downloading the file and send it to the user
Hello BW gurus, I have a question. I have automated the ECC Z table loading process. Like I have a program which will run the ztable update process logic and will update the table and after that it will raise an event in the BW system. Based on the e
-
Can higher version corrupt lower version databse ?
Dear Experts, Oracle 9.2.0.6, HP-UX Oracle 10.2.4 HP-UX Can a database be corrupt in following situation: 1. export ORACLE_HOME=9iHome 2. export PATH=9iPath 3. database is working fine as it is created in 9i 4. Shut immediate; 5. copy parameter file
-
Transfer music from iPad to my laptop
My iTunes has suddenly decided to not accept my iPad2 and is saying I need to restore it to factory settings. I've recently bought a lot of music on my iPad so am keen not to lose that... how can I transfer music from my iPad to my laptop? I've done
-
Frustrating Error ID 10000 on App World
I have started to get app world purchase rejections (ID 10000) on my PlayBook. All methods I can use to pay are in good standing. The problem is either with app world or Digital River. Either way, it is RIM's issue, because I'll be changing platform
-
Hi experts, I am sendig sap smartform output to a fax after converting OTF format. How to see that output that is sent to FAX in SAP. Which is tarnsaction I need to use for this? Thanks in advance, Sreenivas Reddy Maddi