Xorg + 3650 + fglrx...
alright, this is seriously making me sad.
if any of you lurk on irc youve probly argued with me once or twice in the past.
so i was so unlucky i got an ati graphics card. my whole system is compatible, the only thing that refuses to work is xorg+fglrx.
i started off about a year ago or a bit more, trying to make it work. i tried, didnt work, i thought xorg wouldnt work, or fglrx wouldnt anyway, so i put it aside for a while, i said who cares i have the windows pc right next to me. (3 pcs in the house)
no matter what ive tried, i always ended up wiping the hard disk and starting all over. its always better if youve got nothing to lose. i for one didnt.
so i just like reinstalled it and im on a dead end. i cannot believe that this is like the 4th or 5th time im going through this, the exact same problem for the last year or more.
i wipe the disk clean, so i get a clean install. then i make my user, config pacman, all good and ready.
setup xorg with pacman -S xorg, everything installs properly.
however catalyst as i found out was no longer in the repositories. i downloaded both and installed both from aur. first catalyst-utils with makepkg --asroot and then catalyst with the same procedure.
so the software is all prepped and ready to go.
i have never found ONE xorg.conf that ever worked. i even tried that this last time, still didnt work. so i thought ill just skip xorg.conf, ill just do it without a xorg.conf. without xorg.conf everything WORKED, for once. i saw images instead of black and white text coming from the bloody screen, rejoice! screw that, didnt last long. took me a while until i figured out that i couldnt find a way to use fglrx without a xorg.conf. so i made a xorg.conf that worked from the xorg.0.log file. tried to then aticonfig --initial -input blabla whatever. the xorg.conf changed, and then when i tried to run it, everything was unusable. at first it told me it couldnt get the depth right, so i set like default depth 24. when that was out of the way, it had a problem with monitor range. so i set the vertical sync to 60 as my monitor is meant to be. then i ran startx again, and my screen just kept flickering for no reason, getting stuck into an image of a few green and purple lines and boxes (artifacts), with no way of return through ctrl+alt+backspace or whatever. even trying to revert to vesa from that point onward didnt work. total screw up, so i reinstalled again.
i remember being told that with previous versions of xorg there was no such problem. so i downloaded a xorg-server-1.5.3 and when trying to install it i had to install a package called gl which isnt even in the repos. like wtf anyway.
so i scrapped that plan, deleted the archive, and now have my system clean, with only root, a user and xorg installed. i havent installed catalyst yet. suggestions?
my gfx card is hd radeon 3650 and cpu intel pentium 4 3.2ghz
my brain is about to blow...
(if anyone is going to make a comment like "buy a real card", the back button looks like "<".)
come on, people? its been two days.
i cant be the only one that has an hd3650 and runs arch, the only one that tried installing catalyst and be the only one that is still trying.
if im missing some info that could help you understand, just let me know. theres gotta be a way out of this mess with the proprietary drivers.
and im mainly persistent merely cos i think its something im doing wrong on my side that you can help me with. if its hopeless because the drivers are awfully crappy, then ill let it be. if its difficult, i dont care, just hit me with what you know.
Similar Messages
-
[SOLVED] Xorg problem: fglrx, startx & Xorg -configure
Hi,
On a HP 8510p notebook (Core 2 Duo, AMD/ATI Mobility Radeon HD 2600)
I have just installed Arch Linux, did a system update (pacman -Syu), installed the catalyst package, which depends on xorg-server, among others.
When I do a "Xorg -configure" it fails with a "Fatal server error: Caught signal 11. Server aborting". As I see in /var/log/Xorg.0.log, I don't get an (EE)/error. I just can' understand why the X server fails.
/var/log/Xorg.0.log - with no /etc/X11/xorg.conf file
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux archlinux 2.6.23-ARCH #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 24 21:09:40 2007
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 103c,30c5 rev 0c class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2a01 card 0000,0000 rev 0c class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 8086,2a04 card 103c,30c5 rev 0c class 07,80,00 hdr 80
(II) PCI: 00:03:2: chip 8086,2a06 card 103c,30c5 rev 0c class 01,01,85 hdr 00
(II) PCI: 00:03:3: chip 8086,2a07 card 103c,30c5 rev 0c class 07,00,02 hdr 00
(II) PCI: 00:19:0: chip 8086,1049 card 103c,30c5 rev 03 class 02,00,00 hdr 00
(II) PCI: 00:1a:0: chip 8086,2834 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 103c,30c5 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2811 card 103c,30c5 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 103c,30c5 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 103c,30c5 rev 03 class 01,06,01 hdr 00
(II) PCI: 01:00:0: chip 1002,9581 card 103c,30c5 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,aa08 card 103c,30c5 rev 00 class 04,03,00 hdr 80
(II) PCI: 02:06:0: chip 1180,0476 card 6000,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:1: chip 1180,0476 card 6800,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:2: chip 1180,0832 card 103c,30c5 rev 03 class 0c,00,10 hdr 80
(II) PCI: 02:06:3: chip 1180,0822 card 103c,30c5 rev 20 class 08,05,00 hdr 80
(II) PCI: 02:06:4: chip 1180,0843 card 103c,30c5 rev 10 class 08,80,00 hdr 80
(II) PCI: 10:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,40), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe4400000 - 0xe44fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:28:0), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 16: bridge is at (0:28:1), (0,16,16), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe40fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 40: bridge is at (0:28:4), (0,40,40), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 40 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
[4] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[5] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[6] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[7] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 40 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,7), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe4100000 - 0xe43fffff (0x300000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x80000000 - 0x87ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:6:0), (2,3,3), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (2:6:1), (2,4,7), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[1] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0x84000000 - 0x87ffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x9581) rev 0, Mem @ 0xd0000000/28, 0xe4400000/16, I/O @ 0x4000/8
List of video drivers:
fglrx
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
Module class: X.Org Video Driver
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.43.2
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.433
(II) ATI Proprietary Linux Driver Build Date: Nov 9 2007 21:19:16
Backtrace:
0: Xorg(xf86SigHandler+0x7e) [0x80d9d5e]
1: [0xb7f03420]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x13b) [0xb792a5ab]
3: Xorg(DoConfigure+0x211) [0x80dc9f1]
4: Xorg(InitOutput+0x61a) [0x80a7a9a]
5: Xorg(main+0x296) [0x8073b66]
6: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7cd5390]
7: Xorg(FontFileCompleteXLFD+0x201) [0x80730d1]
Fatal server error:
Caught signal 11. Server aborting
Obs: When I do a "startx", with a custom and minimalist xorg.conf, my notebook stops to respond (doesn't function Ctrl-Alt-Backspace, Alt-F2,3..., Ctrl-C... noting) and the screen is all black.
But first, I think it should work the "Xorg -configure"
Last edited by Claudiu2EE (2007-11-30 18:45:20)Hi!
I'll post some more information...
When I do "startx", like I said, it seems that X is starting, the display changes from grey to black and dark-grey again... but then I can't do nothing to exit, but to press the power button.
So, as no "hwd -x" (uses lshwd -> Segmentation fault) or "Xorg -configure" (Caught signal 11. Server aborting) works, I wrote a xorg.conf by 0, googleing around and inspiring me from the Arch Wiki.
I have no ~/.xinitrc (I have tried with one who had an exec xterm, but no success)
Package information:
xorg-server 1.4-5
xorg-xinit 1.0.7-1
xorg-twm 1.0.1-2
xterm 229-2
catalyst 7.11-1
/etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi/:unscaled"
#FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
#FontPath "/usr/share/fonts/75dpi"
# path to defoma fonts
#FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "AIGLX" "off"
EndSection
Section "Module"
#Load "dri" # direct rendering infrastructure which makes opengl go fast
Load "glx" # glx and glcore implement opengl
#Load "GLcore"
Load "extmod" # collection of X protocol extentions that shouldn't even be loadable
#Load "int10" # vesa bios interface for card setup stuff
#Load "vbe"
#Load "i2c" # serial bus over which you speak the ddc protocol to get info from the monitor
Load "ddc"
Load "freetype" # load freetype fonts and type 1 fonts
Load "type1"
Load "dbe"
EndSection
Section "Extensions"
Option "Composite" "off"
EndSection
Section "InputDevice"
Identifier "Generic Notebook Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Generic USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "SHMConfig" "on"
EndSection
Section "Device"
Identifier "ATI Mobility Radeon HD 2600"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Notebook Monitor"
ModelName "AUO LCD MONITOR"
VendorName "AUO"
DisplaySize 331 207
VertRefresh 43-60
HorizSync 30-62
Option "DPMS"
# UseModes "Widescreen Modes"
EndSection
#Section "Modes"
# Identifier "Widescreen Modes"
# Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828
#EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Mobility Radeon HD 2600"
Monitor "Generic Notebook Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
InputDevice "Generic Notebook Keyboard" "CoreKeyboard"
#InputDevice "Generic USB Mouse"
InputDevice "Synaptics Touchpad" "CorePointer"
EndSection
Section "DRI"
Mode 0666
EndSection
/var/log/Xorg.0.log
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux archlinux 2.6.23-ARCH #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 25 13:34:07 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Notebook Monitor"
(**) | |-->Device "AMD Radeon 2600HD"
(**) |-->Input Device "Generic Notebook Keyboard"
(**) |-->Input Device "Synaptics Touchpad"
(**) Option "AllowMouseOpenFail" "on"
(**) Option "AIGLX" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(II) No default mouse found, adding one
(**) |-->Input Device "<default pointer>"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 103c,30c5 rev 0c class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2a01 card 0000,0000 rev 0c class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 8086,2a04 card 103c,30c5 rev 0c class 07,80,00 hdr 80
(II) PCI: 00:03:2: chip 8086,2a06 card 103c,30c5 rev 0c class 01,01,85 hdr 00
(II) PCI: 00:03:3: chip 8086,2a07 card 103c,30c5 rev 0c class 07,00,02 hdr 00
(II) PCI: 00:19:0: chip 8086,1049 card 103c,30c5 rev 03 class 02,00,00 hdr 00
(II) PCI: 00:1a:0: chip 8086,2834 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 103c,30c5 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2811 card 103c,30c5 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 103c,30c5 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 103c,30c5 rev 03 class 01,06,01 hdr 00
(II) PCI: 01:00:0: chip 1002,9581 card 103c,30c5 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,aa08 card 103c,30c5 rev 00 class 04,03,00 hdr 80
(II) PCI: 02:06:0: chip 1180,0476 card 6000,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:1: chip 1180,0476 card 6800,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:2: chip 1180,0832 card 103c,30c5 rev 03 class 0c,00,10 hdr 80
(II) PCI: 02:06:3: chip 1180,0822 card 103c,30c5 rev 20 class 08,05,00 hdr 80
(II) PCI: 02:06:4: chip 1180,0843 card 103c,30c5 rev 10 class 08,80,00 hdr 80
(II) PCI: 10:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,40), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe4400000 - 0xe44fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:28:0), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 16: bridge is at (0:28:1), (0,16,16), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe40fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 40: bridge is at (0:28:4), (0,40,40), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 40 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
[4] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[5] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[6] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[7] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 40 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,7), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe4100000 - 0xe43fffff (0x300000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x80000000 - 0x87ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:6:0), (2,3,3), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (2:6:1), (2,4,7), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[1] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0x84000000 - 0x87ffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x9581) rev 0, Mem @ 0xd0000000/28, 0xe4400000/16, I/O @ 0x4000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.43.2
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.433
(II) ATI Proprietary Linux Driver Build Date: Nov 9 2007 21:19:16
(--) Chipset Supported AMD Graphics Processor (0x9581) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x8206b38
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[24] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[25] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[26] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[27] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[28] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[29] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[30] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[34] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[35] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[36] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[37] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[38] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[39] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[40] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[41] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[42] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[43] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[44] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[45] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[46] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
[47] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[48] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2600" (Chipset = 0x9581)
(--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30c5)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xe4400000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.56
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M76
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: AUO Model: 2074 Serial#: 0
(II) fglrx(0): Year: 2006 Week: 1
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1417 h_border: 0
(II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 815 v_border: 0
(II) fglrx(0): AUO
(II) fglrx(0): B154EW02 V0
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0006af742000000000
(II) fglrx(0): 01100103802115780a1cf59758508e27
(II) fglrx(0): 27505400000001010101010101010101
(II) fglrx(0): 010101010101121b008950200f303020
(II) fglrx(0): 36004bcf100000180000000f00000000
(II) fglrx(0): 00000000000000000020000000fe0041
(II) fglrx(0): 554f0a202020202020202020000000fe
(II) fglrx(0): 004231353445573032205630200a007f
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 12 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x800 (pitch 0)
(**) fglrx(0): *Mode "1280x800": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0 69.30 1280 1328 1360 1417 800 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1280x720": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1328 1360 1417 720 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1024x768": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1328 1360 1417 768 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "800x600": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1328 1360 1417 600 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "720x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 69.30 720 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x432": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"x60.0 69.30 640 1328 1360 1417 432 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x400": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 69.30 640 1328 1360 1417 400 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "512x384": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 69.30 512 1328 1360 1417 384 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "400x300": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0 69.30 400 1328 1360 1417 300 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x240": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0 69.30 320 1328 1360 1417 240 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x200": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0 69.30 320 1328 1360 1417 200 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Display dimensions: (331, 207) mm
(**) fglrx(0): DPI set to (98, 98)
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0 69.30 1280 1328 1360 1417 800 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1280x720": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1328 1360 1417 720 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1024x768": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1328 1360 1417 768 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "800x600": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1328 1360 1417 600 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "720x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 69.30 720 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x432": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"x60.0 69.30 640 1328 1360 1417 432 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x400": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 69.30 640 1328 1360 1417 400 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "512x384": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 69.30 512 1328 1360 1417 384 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "400x300": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0 69.30 400 1328 1360 1417 300 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x240": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0 69.30 320 1328 1360 1417 240 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x200": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0 69.30 320 1328 1360 1417 200 803 809 815 +hsync +vsync (48.9 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): HPV inactive
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 256 MB
(II) fglrx(0): [pcie] 258048 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe4400000 - 0xe440ffff (0x10000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[7] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[8] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[9] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[10] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[11] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[12] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[13] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[14] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[15] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[16] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[17] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[18] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[19] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[20] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[24] 0 0 0x00004000 - 0x000040ff (0x100) IX[b]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[26] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[27] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[28] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[29] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[30] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[31] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[32] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[33] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[34] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[35] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[36] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[37] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[38] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[39] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[40] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[41] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[42] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[43] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[44] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[45] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[46] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[47] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[48] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[49] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
[50] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[51] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(WW) fglrx(0): could not detect X server version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [drm] installed DRM signal handler
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.43.2
(II) fglrx(0): Date: Nov 9 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.23-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00005000
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01000400
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3277)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2477
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 10
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
[atiddx] ASYNCIO init succeed!
Receive enable interrupt ret message
...irqEnableMask: 60000001
...dwIRQEnableId: 00000006
Receive enable interrupt ret message
...irqEnableMask: 00000040
...dwIRQEnableId: 00000007
Receive enable interrupt ret message
...irqEnableMask: ff00002c
...dwIRQEnableId: 00000008
Receive enable interrupt ret message
...irqEnableMask: ff00002d
...dwIRQEnableId: 00000009
Receive enable interrupt ret message
...irqEnableMask: 20000400
...dwIRQEnableId: 0000000a
(II) fglrx(0): Finished Initialize PPLIB!
(II) fglrx(0): Enable the clock gating
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
Please, assist me in this problem.
Thank you. -
I have some problems with my xorg file, and X will not start. I am running an Ati x1400 using the new catalyst drivers, here is a copy of the xorg log and my xorg.conf. Any help would be greatly appreciated.
Xorg log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux myhost 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 12 17:59:21 2008
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1028,01bd rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,27a1 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1b:0: chip 8086,27d8 card 1028,01bd rev 01 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,27d6 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1028,01bd rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1028,01bd rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e1 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1028,01bd rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1028,01bd rev 01 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1028,01bd rev 01 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,7145 card 1028,2003 rev 00 class 03,00,00 hdr 00
(II) PCI: 03:00:0: chip 14e4,170c card 1028,01af rev 02 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 1180,0832 card 1028,01bd rev 00 class 0c,00,10 hdr 80
(II) PCI: 03:01:1: chip 1180,0822 card 1028,01bd rev 19 class 08,05,01 hdr 80
(II) PCI: 03:01:2: chip 1180,0592 card 1028,01bd rev 0a class 08,80,00 hdr 80
(II) PCI: 03:01:3: chip 1180,0852 card 1028,01bd rev 05 class 08,80,00 hdr 80
(II) PCI: 0b:00:0: chip 14e4,4311 card 1028,0007 rev 01 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,12), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfd00000 - 0xdfefffff (0x200000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 11: bridge is at (0:28:0), (0,11,11), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 11 non-prefetchable memory range:
[0] -1 0 0xdfc00000 - 0xdfcfffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 12: bridge is at (0:28:3), (0,12,13), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 12 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 12 non-prefetchable memory range:
[0] -1 0 0xdfa00000 - 0xdfbfffff (0x200000) MX[b]
(II) Bus 12 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd01fffff (0x200000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xdf900000 - 0xdf9fffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon Mobility X1400 rev 0, Mem @ 0xc0000000/28, 0xdfdf0000/16, I/O @ 0xee00/8
List of video drivers:
fglrx
vesa
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.50.3
Module class: X.Org Video Driver
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xdfcfc000 - 0xdfcfffff (0x4000) MX[b]
[1] -1 0 0xdf9fd700 - 0xdf9fd7ff (0x100) MX[b]
[2] -1 0 0xdf9fd600 - 0xdf9fd6ff (0x100) MX[b]
[3] -1 0 0xdf9fd500 - 0xdf9fd5ff (0x100) MX[b]
[4] -1 0 0xdf9fd800 - 0xdf9fdfff (0x800) MX[b]
[5] -1 0 0xdf9fe000 - 0xdf9fffff (0x2000) MX[b]
[6] -1 0 0xffa80000 - 0xffa803ff (0x400) MX[b]
[7] -1 0 0xdfffc000 - 0xdfffffff (0x4000) MX[b]
[8] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[b](B)
[9] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[10] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
[11] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[12] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[13] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[14] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[16] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[17] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[18] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[b]
[19] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[20] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfcfc000 - 0xdfcfffff (0x4000) MX[b]
[1] -1 0 0xdf9fd700 - 0xdf9fd7ff (0x100) MX[b]
[2] -1 0 0xdf9fd600 - 0xdf9fd6ff (0x100) MX[b]
[3] -1 0 0xdf9fd500 - 0xdf9fd5ff (0x100) MX[b]
[4] -1 0 0xdf9fd800 - 0xdf9fdfff (0x800) MX[b]
[5] -1 0 0xdf9fe000 - 0xdf9fffff (0x2000) MX[b]
[6] -1 0 0xffa80000 - 0xffa803ff (0x400) MX[b]
[7] -1 0 0xdfffc000 - 0xdfffffff (0x4000) MX[b]
[8] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[b](B)
[9] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[10] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
[11] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[12] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[13] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[14] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[16] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[17] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[18] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[b]
[19] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[20] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xdfcfc000 - 0xdfcfffff (0x4000) MX[b]
[5] -1 0 0xdf9fd700 - 0xdf9fd7ff (0x100) MX[b]
[6] -1 0 0xdf9fd600 - 0xdf9fd6ff (0x100) MX[b]
[7] -1 0 0xdf9fd500 - 0xdf9fd5ff (0x100) MX[b]
[8] -1 0 0xdf9fd800 - 0xdf9fdfff (0x800) MX[b]
[9] -1 0 0xdf9fe000 - 0xdf9fffff (0x2000) MX[b]
[10] -1 0 0xffa80000 - 0xffa803ff (0x400) MX[b]
[11] -1 0 0xdfffc000 - 0xdfffffff (0x4000) MX[b]
[12] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[b](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
[17] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[18] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[19] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[20] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[23] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[24] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[b]
[25] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[26] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b](B)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.50.3
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.501
(II) ATI Proprietary Linux Driver Build Date: Jun 2 2008 22:46:56
(**) ChipID override: 0x7145
(**) Chipset Supported AMD Graphics Processor (0x7145) found
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) ATI Proprietary Linux Driver Version Identifier:8.50.3
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.501
(II) ATI Proprietary Linux Driver Build Date: Jun 2 2008 22:46:56
(--) Chipset Supported AMD Graphics Processor (0x7145) found
Number of created screens does not match number of detected devices.
Configuration failed.
And the xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "GLcore"
Load "glx"
Load "record"
Load "dbe"
Load "xtrap"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "NoDRI" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "DRM_nbufs" # <i>
#Option "DRM_bufsize" # <i>
#Option "Capabilities" # <i>
#Option "CapabilitiesEx" # <i>
#Option "ClientDriverName" # [<str>]
#Option "KernelModuleParm" # [<str>]
#Option "AGPMask" # <i>
#Option "AGPv3Mask" # <i>
#Option "BufferTiling" # [<bool>]
#Option "Profile" # <str>
#Option "RingSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "GammaCorrectionI" # <i>
#Option "GammaCorrectionII" # <i>
#Option "OpenGLOverlay" # [<bool>]
#Option "DefaultVisualTrueColor" # [<bool>]
#Option "VideoOverlay" # [<bool>]
#Option "DesktopSetup" # [<str>]
#Option "MonitorLayout" # [<str>]
#Option "ForceMonitors" # [<str>]
#Option "EnableMonitor" # <str>
#Option "OverlayOnCRTC2" # [<bool>]
#Option "Mode2" # [<str>]
#Option "PairModes" # [<str>]
#Option "HSync2" # [<str>]
#Option "VRefresh2" # [<str>]
#Option "ScreenOverlap" # <i>
#Option "MemClock" # <i>
#Option "ASICClock" # <i>
#Option "UseInternalAGPGART" # [<bool>]
#Option "FastSwap" # [<bool>]
#Option "Stereo" # [<bool>]
#Option "StereoSyncEnable" # <i>
#Option "DisableOvScaler" # [<bool>]
#Option "UseFastTLS" # <i>
#Option "BlockSignalsOnLock" # [<bool>]
#Option "ForceGenericCPU" # [<bool>]
#Option "CenterMode" # [<bool>]
#Option "OffScreenPixmaps" # [<bool>]
#Option "EnableOpaqueOverlayVisual" # [<bool>]
#Option "TMDSCoherentMode" # [<bool>]
#Option "EnablePrivateBackZ" # [<bool>]
#Option "TVFormat" # [<str>]
#Option "TVStandard" # [<str>]
#Option "TVOverscan" # [<bool>]
#Option "TVHSizeAdj" # <i>
#Option "TVVSizeAdj" # <i>
#Option "TVHPosAdj" # <i>
#Option "TVVPosAdj" # <i>
#Option "TVHStartAdj" # <i>
#Option "TVColorAdj" # <i>
#Option "PseudoColorVisuals" # [<bool>]
#Option "PreferredVRefresh" # <i>
#Option "FastStart" # [<bool>]
#Option "ProfileDriver" # [<bool>]
#Option "PPPTforGART" # [<bool>]
#Option "TexturedVideo" # [<bool>]
#Option "TexturedVideoSync" # [<bool>]
#Option "Textured2D" # [<bool>]
#Option "TexturedXrender" # [<bool>]
#Option "DPMS" # [<bool>]
#Option "MaxGARTSize" # <i>
#Option "LogoPosX" # <i>
#Option "LogoPosY" # <i>
#Option "LogoColFG" # <i>
#Option "LogoColBG" # <i>
#Option "SwapScreens" # [<bool>]
#Option "FBC" # [<bool>]
#Option "FrontBufferMode" # <i>
#Option "BackBufferMode" # <i>
#Option "DepthBufferMode" # <i>
#Option "OverlayBufferMode" # <i>
#Option "VideoOverlayBufferMode" # <i>
#Option "EnableIrqMgr" # [<bool>]
#Option "EnableMulticard" # [<bool>]
#Option "EnablePPLIB" # [<bool>]
#Option "DefaultOnDC" # [<bool>]
#Option "EnableRandR12" # [<bool>]
#Option "DisableRotation" # [<bool>]
#Option "EnableCrossFire" # [<bool>]
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X1400"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Edit: I fixed it by removing the vesa driver from the drivers folder, then by doing aticonfig --initial and renaming the new xorg.conf.fglrx-1 named by the aticonfig to xorg.conf and adding the lines
Section "DRI"
Mode 0666
EndSection
After that I just typed "startx" and it worked fine.
Last edited by cyclotomic (2008-07-13 02:35:50)From what i can see on your xorg.conf it seems to be missing some information. There is no configuration for the monitors HorizSync or VertRefresh in the monitor section and there is no resolution modes configured in the Screen section. And further no default depth is set either. Ive never used the catalyst driver due to i have an old laptop whit an old ati but my xorg.conf looks something like this.
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Oh and i noticed there was som problems whit the type1 font in your log file so it might be good idea to put a # infront of it when you start configuring the xorg.conf. Just to be safe
Last edited by Gluffs (2008-07-12 23:46:09) -
[solved] Xorg -configuration crashes (signal 11)
I've been trying to get Xorg to work all day without success. What I've been doing:
* Install archlinux from scratch
* Upgrade with pacman -Syu
* Install Xorg
* Install fglrx
* Run Xorg -configure.
This is when it crashes with the following output:
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux twarkie 2.6.22-ARCH #1 SMP PREEMPT Tue Sep 25 19:18:19 CEST 2007 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 26 22:11:11 2007
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,00e1 card 0000,0000 rev a1 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 10de,00e0 card 10de,0c11 rev a2 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,00e4 card 10de,0c11 rev a1 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,00e7 card 10de,0c11 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,00e7 card 10de,0c11 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,00e8 card 10de,0c11 rev a2 class 0c,03,20 hdr 80
(II) PCI: 00:05:0: chip 10de,00df card 10de,0c11 rev a2 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 10de,00e5 card f0de,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:09:0: chip 10de,00ee card 10de,0c11 rev a2 class 01,01,85 hdr 00
(II) PCI: 00:0a:0: chip 10de,00e3 card 10de,0c11 rev a2 class 01,01,85 hdr 00
(II) PCI: 00:0b:0: chip 10de,00e2 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,00ed card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1002,4152 card 174b,7c29 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4172 card 174b,7c28 rev 00 class 03,80,00 hdr 00
(II) PCI: 02:0b:0: chip 1412,1724 card 3031,4553 rev 01 class 04,01,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:11:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000b000 - 0x0000bfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xe7ffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:14:0), (0,2,2), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc RV350 AR [Radeon 9600] rev 0, Mem @ 0xd8000000/27, 0xe8030000/16, I/O @ 0xb000/8
(--) PCI: (1:0:1) ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary) rev 0, Mem @ 0xe0000000/27, 0xe8020000/16
List of video drivers:
fglrx
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.40.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xea000000 - 0xea000fff (0x1000) MX[b]
[1] -1 0 0xea004000 - 0xea0040ff (0x100) MX[b]
[2] -1 0 0xea003000 - 0xea003fff (0x1000) MX[b]
[3] -1 0 0xea002000 - 0xea002fff (0x1000) MX[b]
[4] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[5] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000c200 - 0x0000c27f (0x80) IX[b]
[8] -1 0 0x0000c100 - 0x0000c11f (0x20) IX[b]
[9] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b]
[10] -1 0 0x0000de00 - 0x0000de0f (0x10) IX[b]
[11] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[12] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[13] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[14] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[15] -1 0 0x0000d900 - 0x0000d97f (0x80) IX[b]
[16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[17] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[18] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[19] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[20] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[22] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[23] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[24] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[25] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[26] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX[b](B)
[1] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xea000000 - 0xea000fff (0x1000) MX[b]
[1] -1 0 0xea004000 - 0xea0040ff (0x100) MX[b]
[2] -1 0 0xea003000 - 0xea003fff (0x1000) MX[b]
[3] -1 0 0xea002000 - 0xea002fff (0x1000) MX[b]
[4] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[5] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000c200 - 0x0000c27f (0x80) IX[b]
[8] -1 0 0x0000c100 - 0x0000c11f (0x20) IX[b]
[9] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b]
[10] -1 0 0x0000de00 - 0x0000de0f (0x10) IX[b]
[11] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[12] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[13] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[14] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[15] -1 0 0x0000d900 - 0x0000d97f (0x80) IX[b]
[16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[17] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[18] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[19] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[20] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[22] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[23] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[24] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[25] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[26] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX[b](B)
[1] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xea000000 - 0xea000fff (0x1000) MX[b]
[5] -1 0 0xea004000 - 0xea0040ff (0x100) MX[b]
[6] -1 0 0xea003000 - 0xea003fff (0x1000) MX[b]
[7] -1 0 0xea002000 - 0xea002fff (0x1000) MX[b]
[8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[9] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX[b](B)
[10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[11] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX[b](B)
[12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000c200 - 0x0000c27f (0x80) IX[b]
[16] -1 0 0x0000c100 - 0x0000c11f (0x20) IX[b]
[17] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b]
[18] -1 0 0x0000de00 - 0x0000de0f (0x10) IX[b]
[19] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[20] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[21] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[22] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[23] -1 0 0x0000d900 - 0x0000d97f (0x80) IX[b]
[24] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[25] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[26] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[27] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[28] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[29] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[30] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[31] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[32] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[33] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[34] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.40.4
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.402
(II) ATI Proprietary Linux Driver Build Date: Jul 31 2007 22:20:14
Backtrace:
0: Xorg(xf86SigHandler+0x84) [0x80d0574]
1: [0xb7fdc420]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x11b) [0xb7a95bfb]
3: Xorg(DoConfigure+0x20c) [0x80ce37c]
4: Xorg(InitOutput+0x66a) [0x809fc0a]
5: Xorg(main+0x27b) [0x806e36b]
6: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7df5f90]
7: Xorg(FontFileCompleteXLFD+0xa9) [0x806d8b1]
Fatal server error:
Caught signal 11. Server aborting
If I enable the testing repository and perform a full system upgrade, I can get X to work with the open source drivers for ATI. But I need to get fglrx to work in order to use tv-out. So there seem to be a problem with Xorg itself, not the driver in this case.
Any ideas?
Last edited by twarkie (2007-09-26 23:45:54)Well, in your previous log, the crash backtrace:
Backtrace:
0: Xorg(xf86SigHandler+0x84) [0x80d0574]
1: [0xb7fdc420]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x11b) [0xb7a95bfb]
3: Xorg(DoConfigure+0x20c) [0x80ce37c]
4: Xorg(InitOutput+0x66a) [0x809fc0a]
5: Xorg(main+0x27b) [0x806e36b]
6: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7df5f90]
7: Xorg(FontFileCompleteXLFD+0xa9) [0x806d8b1]
died inside /usr/lib/xorg/modules/drivers/fglrx_drv.so - so I figured if you removed fglrx, Xorg -configure wouldn't try to use that module, and the crash would go away. I'm glad I guessed right.
Could you please add [solved] to your topic title? -
Xorg & Catalyst updates cause major problems here
I went through the other similar threads and tried just about everything without luck... The latest Xorg & Catalist updates cause lots of problems on my desktop.
The video card is an ATI X300.
Without a xorg.conf, X server starts and things work, more or less - but much slower than they used to. It's pretty clear fglrx is not actually used, xv doesn't work, fglrxinfo gives:
Error: unable to open display (null)
With the previous xorg.conf (the one wich worked fine before the updates), X doesn't start (even after commenting out the "RgbPath" line and adding Option "AutoAddDevices" "false") and the log shows many fglrx errors such as:
(EE) fglrx(0): Unknown EDID version 0
(EE) fglrx(0): ===[swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
X -configure won't generate a xorg.conf
Fatal server error:
Caught signal 11. Server aborting
In conclusion:
- without a xorg.conf fglrx doesn't work although X server starts
- with an old xorg.conf fglrx will generate errors and X server will not start
Any ideas?
Last edited by zamolxis (2008-12-15 14:11:41)De Mysteriis wrote:
# pacman -S xorg
# pacman -S catalyst
Add HAL daemon to your rc.conf
# cp /usr/share/hal/fdi/policy/10osvendor/10-keymap.fdi /etc/hal/fdi/policy/10-keymap.fdi
# vi /etc/hal/fdi/policy/10-keymap.fdi
(Add your keyboard layout)
# vi /etc/X11/xorg.conf
(Write something like # My xorg.conf and save)
# aticonfig --initial --input=/etc/X11/xorg.conf
# startx
This worked for me 100%.
I had alreday done all that. Still, X will crash every time after changing the resolution (for tv out) and back and won't restart unless I delete /etc/ati/amdpcsdb first. Rebooting won't help either (again, unless I delete /etc/ati/amdpcsdb first).
Last edited by zamolxis (2008-12-16 09:14:48) -
To those posting Xorg 7.3 problems...
It may be helpful for everyone involved if you specify whether:
* you are running a Composite Manager (e.g. Xcompmgr, Compiz, Compiz-Fusion, or Beryl)
* you have AIGLX enabled in xorg.conf
* you have composite enabled in xorg.conf
* you are using fglrx or the open source radeon driver
No need to post here, just keep these in mind when posting in relevant threads.
Personally, I haven't had any problems with the latest Xorg and fglrx (aside from fglrxinfo not working), but then again I'm not running any composite managers or extensions.
Last edited by thayer.w (2007-11-06 21:48:42)slackhack wrote:
i'm using the open source radeon driver - no display problems yet, but java apps don't work anymore. I had to add the sloppy lock export line to .xinitrc. i also got a message about nvidia-utils related to libgl that didn't really seem applicable. O.o
the only minor problem i've encountered is I used to switch Esc with Caps Lock in ~/.Xmodmap with:
remove Lock = Caps_Lock
keysym Escape = Caps_Lock
keysym Escape = Escape
keysym Caps_Lock = Escape
add Lock = Caps_Lock
and now that no longer works. does anyone have an alternate way of doing that?
I seem to have a similar problem where xmodmap -e 'clear Lock' doesn't work, unless I do it inside X. (right now it's in .xinitrc) -
AMD Drivers - Dual monitor - xorg
Decided to install arch again after a HDD failure. Since I'm not that good with drivers (and xorg) I came this far.. I'm running an AMD HD6850.
What I've done:
Installed the basic (vesa) driver
Installed the libre (xf86-video-ati) driver
Installed the proprietary (catalyst-dkms & catalyst-utils & lib32-catalyst-utils) drivers
Installed mesa-demos
What that did:
With the libre driver, I was able to start xorg, with my WM (awesome) and it "Just Werked (tm)", however, I was unable to set up side-by-side monitors, and after some thinking I decided to go for the proprietary driver, since I shower regurarly and only wears a tinfoilhat sometimes.
After installing the proprietary driver, I got the same thing. Started just fine (after a reboot), and "JustWerks (tm)" except for side-by-side monitors.
I remembered running "glxgears" to test if it was working the last time I used this computer with GNU/Linux, however the command was not found.
Some guy on a IRC channel told me to run "glxinfo" (and grep direct) , which was not found, but after installing "mesa-demos" it was, and it returned this error:
[cat@loli ~]$ glxinfo | grep direct
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 153 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 12
Current serial number in output stream: 12
The same error appears when I try to run glxgears aswell.
So, I'm grateful for all help. and I would really appreciate it.
Last edited by oniichan (2012-10-14 19:58:43)bsilbaugh wrote:Absolutely. Even if using the open source driver isn't the ideal long term solution, if it works, it would (1) provide you with a working short term solution, and (2) would confirm that the other elements of your graphics system are (most likely) functioning properly.
I'll try that one first now, however:
I recently got the advice to install the catalyst-total driver from the AUR. I did that, but I can't start Catalyst Control Centre, which would be a nice and easy way to do it...
when I try to run 'amdcccle' which is the control centre, i get an error saying ''There was a problem initializing Catalyst Control Centre Linux Edition. It could be caused by the following.
No AMD graphics driver is installed, or the AMD driver is not functioning properly.
Please install the AMD driver appropriate for you AMD hardware, or configure using aticonfig. ''
When I try to run '' aticonfig '' i get this:
[cat@loli ~]$ sudo aticonfig --initial=dual-head --screen-layout=left-of
[sudo] password for cat:
Found fglrx primary device section
Found fglrx secondary device section
Using /etc/X11/xorg.conf
Saving back-up to /etc/X11/xorg.conf.fglrx-0
But nothing appears to be happening.
bsilbaugh wrote:My previous comment that Display Port is necessary for use of ATI eyefinity was true; however, running dual head displays generally does not require eyefinity. In fact, my old Radeon 4650 did not provide a Display Port (nor eyefinity). I was able to directly plug my monitors into the DVI and VGA ports of the 4650 card. For true dual head display, the important hardware criteria is that your card provides at least two controllers--which I believe your card does.
My card is perfectly capable of running it the way I want it, since it does under Fedora 17. -
Hello, I'm not sure whether I'm posting in the correct section of the forums but anyway, here's the problem, after upgrading the system xfce started crashing randomly (It definitely crashes when I try to suspend first time, then it does it correctly). I took a look in Xorg and fglrx log files, they didn't contain any errors. However, dmesg listed a segfault of xfce4-session in libglib, is there any solution for that problem or I just have to wait until the upgrade. Also, I have and AMD E-450 APU, and a proprietary catalyst driver from catalyst-stable. Here is the output from dmesg (the segfault message is in the end):
[ 0.000000] PM: Registered nosave memory: 00000000afb64000 - 00000000afb6c000
[ 0.000000] PM: Registered nosave memory: 00000000afb6c000 - 00000000afb91000
[ 0.000000] PM: Registered nosave memory: 00000000afb91000 - 00000000afbd4000
[ 0.000000] PM: Registered nosave memory: 00000000afd47000 - 00000000afef7000
[ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
[ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
[ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[ 0.000000] e820: [mem 0xaff00000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s84544 r8192 d21952 u1048576
[ 0.000000] pcpu-alloc: s84544 r8192 d21952 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 966665
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lqx root=UUID=ee58701b-54f4-4a5e-a884-636f3ac8cb2f ro nomodeset usbcore.autosuspend=1 quiet usbcore.autosuspend=0 nomodeset nmi_watchdog=0 pcie_aspm=force
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3782720k/5242880k available (4438k kernel code, 1314812k absent, 145348k reserved, 2809k data, 640k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 1646.401 MHz processor
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3292.80 BogoMIPS (lpj=1646401)
[ 0.000010] pid_max: default: 32768 minimum: 301
[ 0.000063] Security Framework initialized
[ 0.000068] SELinux: Disabled at boot.
[ 0.000071] AppArmor: AppArmor disabled by boot time parameter
[ 0.000073] Yama: becoming mindful.
[ 0.000095] Mount-cache hash table entries: 256
[ 0.000418] tseg: 00aff00000
[ 0.000422] CPU: Physical Processor ID: 0
[ 0.000424] CPU: Processor Core ID: 0
[ 0.000426] mce: CPU supports 6 MCE banks
[ 0.000442] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 5
[ 0.000558] Freeing SMP alternatives: 16k freed
[ 0.002455] ACPI: Core revision 20121018
[ 0.015032] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.025024] smpboot: CPU0: AMD E-450 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[ 0.126038] Performance Events: AMD PMU driver.
[ 0.126044] ... version: 0
[ 0.126047] ... bit width: 48
[ 0.126048] ... generic registers: 4
[ 0.126050] ... value mask: 0000ffffffffffff
[ 0.126051] ... max period: 00007fffffffffff
[ 0.126053] ... fixed-purpose events: 0
[ 0.126054] ... event mask: 000000000000000f
[ 0.134178] smpboot: Booting Node 0, Processors #1 OK
[ 0.147430] Brought up 2 CPUs
[ 0.147435] smpboot: Total of 2 processors activated (6585.60 BogoMIPS)
[ 0.148250] devtmpfs: initialized
[ 0.148666] PM: Registering ACPI NVS region [mem 0xafaf7000-0xafb3efff] (294912 bytes)
[ 0.148681] PM: Registering ACPI NVS region [mem 0xafb49000-0xafb4bfff] (12288 bytes)
[ 0.148683] PM: Registering ACPI NVS region [mem 0xafb4d000-0xafb4dfff] (4096 bytes)
[ 0.148686] PM: Registering ACPI NVS region [mem 0xafb64000-0xafb6bfff] (32768 bytes)
[ 0.148689] PM: Registering ACPI NVS region [mem 0xafb91000-0xafbd3fff] (274432 bytes)
[ 0.149151] regulator-dummy: no parameters
[ 0.149293] NET: Registered protocol family 16
[ 0.150271] ACPI: bus type pci registered
[ 0.150593] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.150599] PCI: not using MMCONFIG
[ 0.150601] PCI: Using configuration type 1 for base access
[ 0.150602] PCI: Using configuration type 1 for extended access
[ 0.155916] bio: create slab <bio-0> at 0
[ 0.156315] ACPI: Added _OSI(Module Device)
[ 0.156319] ACPI: Added _OSI(Processor Device)
[ 0.156321] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.156323] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.158103] ACPI: EC: Look up EC in DSDT
[ 0.160056] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.172510] ACPI: Interpreter enabled
[ 0.172527] ACPI: (supports S0 S3 S4 S5)
[ 0.172576] ACPI: Using IOAPIC for interrupt routing
[ 0.172886] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.172961] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.213033] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.213391] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.245487] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.245850] ACPI: No dock devices found.
[ 0.245858] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.246163] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.246166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.246887] PCI host bridge to bus 0000:00
[ 0.246895] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.246899] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.246906] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.246910] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.246913] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.246916] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.246919] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.246923] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.246938] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.246999] pci 0000:00:01.0: [1002:9806] type 00 class 0x030000
[ 0.247013] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.247023] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[ 0.247032] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.247093] pci 0000:00:01.0: supports D1 D2
[ 0.247118] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.247130] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
[ 0.247202] pci 0000:00:01.1: supports D1 D2
[ 0.247388] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[ 0.247482] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.247576] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.247602] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
[ 0.247615] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
[ 0.247629] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
[ 0.247642] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
[ 0.247655] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
[ 0.247669] pci 0000:00:11.0: reg 24: [mem 0xfeb4d000-0xfeb4d3ff]
[ 0.247749] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.247767] pci 0000:00:12.0: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
[ 0.247863] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.247889] pci 0000:00:12.2: reg 10: [mem 0xfeb4b000-0xfeb4b0ff]
[ 0.247997] pci 0000:00:12.2: supports D1 D2
[ 0.248000] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.248033] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.248052] pci 0000:00:13.0: reg 10: [mem 0xfeb4a000-0xfeb4afff]
[ 0.248150] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.248175] pci 0000:00:13.2: reg 10: [mem 0xfeb49000-0xfeb490ff]
[ 0.248289] pci 0000:00:13.2: supports D1 D2
[ 0.248292] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.248325] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.248433] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.248461] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.248548] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.248571] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.248673] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.248732] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.248750] pci 0000:00:14.5: reg 10: [mem 0xfeb48000-0xfeb48fff]
[ 0.248848] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.248953] pci 0000:00:15.0: supports D1 D2
[ 0.248991] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.249095] pci 0000:00:15.1: supports D1 D2
[ 0.249133] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[ 0.249237] pci 0000:00:15.2: supports D1 D2
[ 0.249282] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
[ 0.249387] pci 0000:00:15.3: supports D1 D2
[ 0.249426] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.249474] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.249518] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.249564] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.249621] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.249665] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.249711] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.249755] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.249928] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.250055] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.250067] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.250070] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.250074] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.250077] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.250080] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.250083] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.250086] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.250216] pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000
[ 0.250259] pci 0000:03:00.0: reg 10: [mem 0xfea00000-0xfea03fff 64bit]
[ 0.250422] pci 0000:03:00.0: supports D1 D2
[ 0.250425] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.252383] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.252400] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.252481] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.252587] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.252610] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.252649] pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.252674] pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.252777] pci 0000:05:00.0: supports D1 D2
[ 0.252780] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254339] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.254353] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 0.254369] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.254451] pci 0000:00:15.3: PCI bridge to [bus 06]
[ 0.254501] pci_bus 0000:00: on NUMA node 0
[ 0.254602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 0.254674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
[ 0.254726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
[ 0.254777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE23._PRT]
[ 0.254856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.254913] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.254916] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.259554] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.259704] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.259814] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.259920] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.260007] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.260075] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.260142] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.260210] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.260719] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.260732] vgaarb: loaded
[ 0.260733] vgaarb: bridge control possible 0000:00:01.0
[ 0.261239] ACPI: bus type usb registered
[ 0.261372] usbcore: registered new interface driver usbfs
[ 0.261438] usbcore: registered new interface driver hub
[ 0.261565] usbcore: registered new device driver usb
[ 0.262092] PCI: Using ACPI for IRQ routing
[ 0.273018] PCI: pci_cache_line_size set to 64 bytes
[ 0.273142] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.273146] e820: reserve RAM buffer [mem 0xafaf7000-0xafffffff]
[ 0.273149] e820: reserve RAM buffer [mem 0xafb54000-0xafffffff]
[ 0.273151] e820: reserve RAM buffer [mem 0xafd47000-0xafffffff]
[ 0.273154] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
[ 0.273543] NetLabel: Initializing
[ 0.273546] NetLabel: domain hash size = 128
[ 0.273547] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.273565] NetLabel: unlabeled traffic allowed by default
[ 0.273680] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.273687] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.275723] Switching to clocksource hpet
[ 0.281493] pnp: PnP ACPI init
[ 0.281511] ACPI: bus type pnp registered
[ 0.281854] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.281861] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.282965] system 00:01: [io 0x040b] has been reserved
[ 0.282969] system 00:01: [io 0x04d6] has been reserved
[ 0.282972] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.282979] system 00:01: [io 0x0c14] has been reserved
[ 0.282984] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.282987] system 00:01: [io 0x0c52] has been reserved
[ 0.282990] system 00:01: [io 0x0c6c] has been reserved
[ 0.282994] system 00:01: [io 0x0c6f] has been reserved
[ 0.282997] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.283000] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.283004] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.283007] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.283010] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.283014] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.283017] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.283020] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.283024] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.283027] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.283033] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.283037] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.283041] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.283045] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.283049] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.283054] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.283057] system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.283062] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.283085] pnp 00:02: [dma 4]
[ 0.283236] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.283356] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.283484] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.283686] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.283691] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.283937] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.284106] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.284264] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.284487] pnp 00:09: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 0.285108] system 00:0a: [mem 0xb0000000-0xbfffffff] has been reserved
[ 0.285113] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297800] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.297811] pnp: PnP ACPI: found 12 devices
[ 0.297813] ACPI: ACPI bus type pnp unregistered
[ 0.303106] pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.303114] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.303119] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.303173] pci 0000:00:15.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.303178] pci 0000:00:15.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.303192] pci 0000:00:15.1: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.303196] pci 0000:00:15.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.303200] pci 0000:00:15.1: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.303213] pci 0000:00:15.2: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 400000
[ 0.303226] pci 0000:00:15.3: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.303230] pci 0000:00:15.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
[ 0.303234] pci 0000:00:15.3: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
[ 0.303253] pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.303257] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.303261] pci 0000:00:15.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.303264] pci 0000:00:15.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.303268] pci 0000:00:15.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.303271] pci 0000:00:15.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.303275] pci 0000:00:15.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.303278] pci 0000:00:15.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.303281] pci 0000:00:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.303285] pci 0000:00:15.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.303288] pci 0000:00:15.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.303291] pci 0000:00:15.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.303300] pci 0000:00:04.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
[ 0.303305] pci 0000:00:04.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.303310] pci 0000:00:15.0: BAR 15: assigned [mem 0xd0500000-0xd06fffff 64bit pref]
[ 0.303315] pci 0000:00:15.1: BAR 14: assigned [mem 0xd0700000-0xd08fffff]
[ 0.303320] pci 0000:00:15.1: BAR 15: assigned [mem 0xd0900000-0xd0afffff 64bit pref]
[ 0.303324] pci 0000:00:15.2: BAR 14: assigned [mem 0xd0b00000-0xd0efffff]
[ 0.303328] pci 0000:00:15.3: BAR 14: assigned [mem 0xd0f00000-0xd10fffff]
[ 0.303332] pci 0000:00:15.3: BAR 15: assigned [mem 0xd1100000-0xd12fffff 64bit pref]
[ 0.303339] pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.303345] pci 0000:00:15.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.303349] pci 0000:00:15.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.303354] pci 0000:00:15.3: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.303361] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.303367] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.303373] pci 0000:00:04.0: bridge window [mem 0xd0100000-0xd02fffff]
[ 0.303378] pci 0000:00:04.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.303385] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.303470] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.303474] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
[ 0.303481] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.303487] pci 0000:00:15.0: bridge window [mem 0xd0500000-0xd06fffff 64bit pref]
[ 0.303495] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.303499] pci 0000:00:15.1: bridge window [io 0x3000-0x3fff]
[ 0.303506] pci 0000:00:15.1: bridge window [mem 0xd0700000-0xd08fffff]
[ 0.303512] pci 0000:00:15.1: bridge window [mem 0xd0900000-0xd0afffff 64bit pref]
[ 0.303521] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.303525] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 0.303532] pci 0000:00:15.2: bridge window [mem 0xd0b00000-0xd0efffff]
[ 0.303537] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.303545] pci 0000:00:15.3: PCI bridge to [bus 06]
[ 0.303549] pci 0000:00:15.3: bridge window [io 0x4000-0x4fff]
[ 0.303557] pci 0000:00:15.3: bridge window [mem 0xd0f00000-0xd10fffff]
[ 0.303562] pci 0000:00:15.3: bridge window [mem 0xd1100000-0xd12fffff 64bit pref]
[ 0.303627] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.303631] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.303634] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.303637] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.303640] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.303643] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.303647] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.303650] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.303653] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
[ 0.303656] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.303660] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.303663] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.303666] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.303669] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
[ 0.303672] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.303675] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.303678] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.303681] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.303684] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.303687] pci_bus 0000:03: resource 2 [mem 0xd0500000-0xd06fffff 64bit pref]
[ 0.303691] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.303693] pci_bus 0000:04: resource 1 [mem 0xd0700000-0xd08fffff]
[ 0.303752] pci_bus 0000:04: resource 2 [mem 0xd0900000-0xd0afffff 64bit pref]
[ 0.303755] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.303758] pci_bus 0000:05: resource 1 [mem 0xd0b00000-0xd0efffff]
[ 0.303761] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.303765] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 0.303768] pci_bus 0000:06: resource 1 [mem 0xd0f00000-0xd10fffff]
[ 0.303771] pci_bus 0000:06: resource 2 [mem 0xd1100000-0xd12fffff 64bit pref]
[ 0.303836] NET: Registered protocol family 2
[ 0.304049] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.304316] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.304574] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.304683] TCP: reno registered
[ 0.304693] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.304845] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.305013] NET: Registered protocol family 1
[ 0.305042] pci 0000:00:01.0: Boot video device
[ 0.305384] PCI: CLS 64 bytes, default 64
[ 0.305471] Unpacking initramfs...
[ 0.400016] Freeing initrd memory: 2664k freed
[ 0.401721] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.401733] software IO TLB [mem 0xabaf7000-0xafaf7000] (64MB) mapped at [ffff8800abaf7000-ffff8800afaf6fff]
[ 0.401984] LVT offset 0 assigned for vector 0x400
[ 0.402067] perf: AMD IBS detected (0x000000ff)
[ 0.402950] audit: initializing netlink socket (disabled)
[ 0.402971] type=2000 audit(1367137456.294:1): initialized
[ 0.403912] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.410965] VFS: Disk quotas dquot_6.5.2
[ 0.411207] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.411535] msgmni has been set to 7393
[ 0.412281] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.412285] io scheduler noop registered
[ 0.412287] io scheduler deadline registered
[ 0.412295] io scheduler cfq registered
[ 0.412435] io scheduler bfq registered (default)
[ 0.413822] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.415487] Linux agpgart interface v0.103
[ 0.415820] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.415822] vesafb: scrolling: redraw
[ 0.415826] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.416298] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010100000, using 3072k, total 3072k
[ 0.477778] Console: switching to colour frame buffer device 128x48
[ 0.530645] fb0: VESA VGA frame buffer device
[ 0.530917] ACPI: acpi_idle registered with cpuidle
[ 0.557297] GHES: HEST is not enabled!
[ 0.557305] XENFS: not registering filesystem on non-xen platform
[ 0.557737] libphy: Fixed MDIO Bus: probed
[ 0.557999] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
[ 0.561580] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.561601] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.562037] mousedev: PS/2 mouse device common for all mice
[ 0.562175] cpuidle: using governor ladder
[ 0.562284] cpuidle: using governor menu
[ 0.562288] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.562699] TCP: vegas registered
[ 0.562701] TCP: yeah registered
[ 0.562786] Key type dns_resolver registered
[ 0.563728] registered taskstats version 1
[ 0.564483] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.564936] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
[ 0.566831] acpi-cpufreq: overriding BIOS provided _PSD data
[ 0.567786] Freeing unused kernel memory: 640k freed
[ 0.568164] CFS CPU scheduler.
[ 0.584465] systemd-udevd[507]: starting version 202
[ 0.653357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.655531] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.655963] ehci-pci: EHCI PCI platform driver
[ 0.656097] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.656109] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 0.656128] QUIRK: Enable AMD PLL fix
[ 0.656224] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4c000
[ 0.657747] SCSI subsystem initialized
[ 0.661333] ACPI: bus type scsi registered
[ 0.665103] libata version 3.00 loaded.
[ 0.711249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.711257] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.711260] usb usb1: Product: OHCI Host Controller
[ 0.711263] usb usb1: Manufacturer: Linux 3.8.8-1-lqx ohci_hcd
[ 0.711266] usb usb1: SerialNumber: 0000:00:12.0
[ 0.711963] hub 1-0:1.0: USB hub found
[ 0.711978] hub 1-0:1.0: 5 ports detected
[ 0.712324] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.712335] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
[ 0.712343] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.712361] ehci-pci 0000:00:12.2: debug port 1
[ 0.712428] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4b000
[ 0.718188] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.718242] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.718249] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.718255] usb usb2: Product: EHCI Host Controller
[ 0.718260] usb usb2: Manufacturer: Linux 3.8.8-1-lqx ehci_hcd
[ 0.718264] usb usb2: SerialNumber: 0000:00:12.2
[ 0.718762] hub 2-0:1.0: USB hub found
[ 0.718770] hub 2-0:1.0: 5 ports detected
[ 0.719034] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.719043] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 0.719061] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.719099] ehci-pci 0000:00:13.2: debug port 1
[ 0.719142] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb49000
[ 0.725166] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.725211] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.725218] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.725224] usb usb3: Product: EHCI Host Controller
[ 0.725230] usb usb3: Manufacturer: Linux 3.8.8-1-lqx ehci_hcd
[ 0.725235] usb usb3: SerialNumber: 0000:00:13.2
[ 0.725648] hub 3-0:1.0: USB hub found
[ 0.725656] hub 3-0:1.0: 5 ports detected
[ 0.725886] ahci 0000:00:11.0: version 3.0
[ 0.726156] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.726162] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.730354] scsi0 : ahci
[ 0.730816] scsi1 : ahci
[ 0.731197] scsi2 : ahci
[ 0.731481] scsi3 : ahci
[ 0.731816] scsi4 : ahci
[ 0.732139] scsi5 : ahci
[ 0.732460] ata1: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d100 irq 19
[ 0.732464] ata2: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d180 irq 19
[ 0.732468] ata3: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d200 irq 19
[ 0.732471] ata4: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d280 irq 19
[ 0.732475] ata5: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d300 irq 19
[ 0.732478] ata6: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d380 irq 19
[ 0.732661] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.732683] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 0.732720] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4a000
[ 0.787137] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.787142] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.787145] usb usb4: Product: OHCI Host Controller
[ 0.787148] usb usb4: Manufacturer: Linux 3.8.8-1-lqx ohci_hcd
[ 0.787151] usb usb4: SerialNumber: 0000:00:13.0
[ 0.787659] hub 4-0:1.0: USB hub found
[ 0.787670] hub 4-0:1.0: 5 ports detected
[ 0.787909] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 0.787918] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 0.787944] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb48000
[ 0.842042] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.842046] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.842049] usb usb5: Product: OHCI Host Controller
[ 0.842052] usb usb5: Manufacturer: Linux 3.8.8-1-lqx ohci_hcd
[ 0.842054] usb usb5: SerialNumber: 0000:00:14.5
[ 0.842401] hub 5-0:1.0: USB hub found
[ 0.842410] hub 5-0:1.0: 2 ports detected
[ 1.036735] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.036809] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.037712] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.037754] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.037797] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.121601] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ 1.191503] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.197711] ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2AR10002, max UDMA/133
[ 1.197719] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.203906] ata1.00: configured for UDMA/133
[ 1.204335] scsi 0:0:0:0: Direct-Access ATA ST500LM012 HN-M5 2AR1 PQ: 0 ANSI: 5
[ 1.212034] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.212041] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.212125] sd 0:0:0:0: [sda] Write Protect is off
[ 1.212130] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.212166] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.239240] usb 2-5: New USB device found, idVendor=12d1, idProduct=1506
[ 1.239251] usb 2-5: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 1.239257] usb 2-5: Product: HUAWEI Mobile
[ 1.239263] usb 2-5: Manufacturer: Huawei Technologies
[ 1.239601] sda: sda1 sda2 sda3 sda4
[ 1.241058] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.248373] Initializing USB Mass Storage driver...
[ 1.248653] scsi6 : usb-storage 2-5:1.5
[ 1.249032] scsi7 : usb-storage 2-5:1.6
[ 1.250887] usbcore: registered new interface driver usb-storage
[ 1.250892] USB Mass Storage support registered.
[ 1.346272] usb 3-4: new high-speed USB device number 2 using ehci-pci
[ 1.402164] tsc: Refined TSC clocksource calibration: 1646.493 MHz
[ 1.402180] Switching to clocksource tsc
[ 1.463721] usb 3-4: New USB device found, idVendor=2232, idProduct=1020
[ 1.463730] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.463737] usb 3-4: Product: WebCam SC-0311139N
[ 1.463743] usb 3-4: Manufacturer: Image Processor
[ 1.463748] usb 3-4: SerialNumber: SM3711
[ 1.690741] usb 1-3: new full-speed USB device number 2 using ohci_hcd
[ 1.847612] usb 1-3: New USB device found, idVendor=0a5c, idProduct=219c
[ 1.847624] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.847631] usb 1-3: Product: Broadcom BCM2070 Bluetooth Device
[ 1.847637] usb 1-3: Manufacturer: Broadcom Corp
[ 1.847642] usb 1-3: SerialNumber: 30144A229E4B
[ 2.058659] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.250157] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 2.250876] scsi 7:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2
[ 2.302154] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 2.827197] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.065305] systemd[1]: Inserted module 'autofs4'
[ 3.083044] systemd[1]: Set hostname to <REM>.
[ 3.104478] systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
[ 3.673989] systemd[1]: logged here: 'Support for option SysVStartPriority= has been disabled at compile time and is ignored': 0
[ 3.928323] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.928445] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.928473] systemd[1]: Starting Remote File Systems.
[ 3.928499] systemd[1]: Reached target Remote File Systems.
[ 3.928520] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.928571] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.928589] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.928636] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.928654] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.928708] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.928727] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.928777] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.928798] systemd[1]: Starting Encrypted Volumes.
[ 3.928818] systemd[1]: Reached target Encrypted Volumes.
[ 3.928949] systemd[1]: Starting udev Kernel Socket.
[ 3.928994] systemd[1]: Listening on udev Kernel Socket.
[ 3.929083] systemd[1]: Starting udev Control Socket.
[ 3.929127] systemd[1]: Listening on udev Control Socket.
[ 3.929179] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.929401] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.929433] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.929511] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.929537] systemd[1]: Starting Journal Socket.
[ 3.929627] systemd[1]: Listening on Journal Socket.
[ 3.929668] systemd[1]: Mounting Debug File System...
[ 3.941501] systemd[1]: Starting Setup Virtual Console...
[ 3.948777] systemd[1]: Starting udev Coldplug all Devices...
[ 4.302692] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.302896] systemd[1]: Starting Create static device nodes in /dev...
[ 4.311080] systemd[1]: Mounting Huge Pages File System...
[ 4.333926] systemd[1]: Starting Apply Kernel Variables...
[ 4.344029] systemd[1]: Starting Journal Service...
[ 4.354053] systemd[1]: Started Journal Service.
[ 4.354159] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.398484] systemd[1]: Starting Load Kernel Modules...
[ 4.405897] systemd[1]: Expecting device dev-sda2.device...
[ 4.405958] systemd[1]: Started File System Check on Root Device.
[ 4.405985] systemd[1]: Mounting Temporary Directory...
[ 4.444783] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.141813] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=15
[ 5.523573] vboxdrv: Found 2 processor cores.
[ 5.523876] vboxdrv: fAsync=0 offMin=0x37b offMax=0x21cc
[ 5.524228] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 5.524230] vboxdrv: Successfully loaded version 4.2.12_OSE (interface 0x001a0004).
[ 5.585084] systemd-udevd[1417]: starting version 202
[ 6.551072] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 6.551149] ACPI: Lid Switch [LID]
[ 6.551279] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.551286] ACPI: Power Button [PWRB]
[ 6.551432] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 6.551436] ACPI: Sleep Button [SLPB]
[ 6.551556] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.551560] ACPI: Power Button [PWRF]
[ 6.557442] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.570168] ACPI: AC Adapter [ADP1] (on-line)
[ 6.576119] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 6.581379] acpi device:31: registered as cooling_device2
[ 6.581414] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 6.581535] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5
[ 6.685232] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.685246] ACPI: Battery Slot [BAT1] (battery present)
[ 6.830273] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.830383] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 7.576782] [drm] Initialized drm 1.1.0 20060810
[ 7.618495] [drm] VGACON disable radeon kernel modesetting.
[ 7.620005] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.620007] [drm] No driver support for vblank timestamp query.
[ 7.620012] [drm] Initialized radeon 1.33.0 20080528 for 0000:00:01.0 on minor 0
[ 7.767784] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 7.767790] Disabling lock debugging due to kernel taint
[ 7.783921] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3540 MBytes.
[ 7.784096] <6>[fglrx] vendor: 1002 device: 9806 count: 1
[ 7.784621] <6>[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[ 7.785024] <6>[fglrx] Kernel PAT support is enabled
[ 7.785057] <6>[fglrx] module loaded - fglrx 9.1.11 [Dec 19 2012] with 1 minors
[ 8.571990] Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k
[ 10.299762] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 10.935682] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[ 10.950057] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x16, 0x0a.
[ 11.022649] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[ 11.032941] microcode: CPU0: patch_level=0x05000101
[ 14.667774] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 14.684494] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 14.684678] sp5100_tco: PCI Revision ID: 0x42
[ 14.684818] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 14.684869] sp5100_tco: Last reboot was not triggered by watchdog.
[ 14.685016] sp5100_tco: initialized (0xffffc9000003eb00). heartbeat=60 sec (nowayout=0)
[ 14.913699] systemd-logind[1501]: Watching system buttons on /dev/input/event1 (Lid Switch)
[ 14.914754] systemd-logind[1501]: Watching system buttons on /dev/input/event2 (Power Button)
[ 14.915967] systemd-logind[1501]: Watching system buttons on /dev/input/event3 (Sleep Button)
[ 14.916946] systemd-logind[1501]: Watching system buttons on /dev/input/event4 (Power Button)
[ 14.925385] systemd-logind[1501]: Watching system buttons on /dev/input/event5 (Video Bus)
[ 14.993314] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 14.993343] microcode: CPU1: patch_level=0x05000101
[ 14.994827] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 15.200573] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 15.200964] r8169 0000:05:00.0: irq 40 for MSI/MSI-X
[ 15.204405] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000034000, 50:b7:c3:02:d7:05, XID 0c900800 IRQ 40
[ 15.204413] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 15.290455] systemd-udevd[1420]: renamed network interface eth0 to enp5s0
[ 15.292678] systemd-sysctl[2033]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 15.404438] samsung_laptop: detected SABI interface: SwSmi@
[ 15.404444] samsung_laptop: Backlight controlled by ACPI video driver
[ 15.452716] fglrx_pci 0000:00:01.0: irq 41 for MSI/MSI-X
[ 15.453760] <6>[fglrx] Firegl kernel thread PID: 2044
[ 15.453957] <6>[fglrx] Firegl kernel thread PID: 2045
[ 15.454361] <6>[fglrx] Firegl kernel thread PID: 2046
[ 15.454513] <6>[fglrx] IRQ 41 Enabled
[ 15.459141] <6>[fglrx] Gart USWC size:1156 M.
[ 15.459145] <6>[fglrx] Gart cacheable size:458 M.
[ 15.459152] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 15.459154] <6>[fglrx] Reserved FB block: Unshared offset:fc54000, size:3a0000
[ 15.459157] <6>[fglrx] Reserved FB block: Unshared offset:fff4000, size:c000
[ 15.461998] systemd-sysctl[2047]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 15.698292] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 16.424442] kvm: Nested Virtualization enabled
[ 16.424448] kvm: Nested Paging enabled
[ 16.499708] cfg80211: Calling CRDA to update world regulatory domain
[ 16.716267] Bluetooth: Core ver 2.16
[ 16.718230] NET: Registered protocol family 31
[ 16.718232] Bluetooth: HCI device and connection manager initialized
[ 16.718245] Bluetooth: HCI socket layer initialized
[ 16.718249] Bluetooth: L2CAP socket layer initialized
[ 16.718259] Bluetooth: SCO socket layer initialized
[ 16.733212] media: Linux media interface: v0.10
[ 16.782160] lib80211: common routines for IEEE802.11 drivers
[ 16.782166] lib80211_crypt: registered algorithm 'NULL'
[ 16.784149] Linux video capture interface: v2.00
[ 16.815091] usbcore: registered new interface driver usbserial
[ 16.816124] usbcore: registered new interface driver usbserial_generic
[ 16.817094] usbserial: USB Serial support registered for generic
[ 16.906678] usbcore: registered new interface driver option
[ 16.909342] usbserial: USB Serial support registered for GSM modem (1-port)
[ 16.909431] option 2-5:1.0: GSM modem (1-port) converter detected
[ 16.912145] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB0
[ 16.912225] option 2-5:1.3: GSM modem (1-port) converter detected
[ 16.915130] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB1
[ 16.915190] option 2-5:1.4: GSM modem (1-port) converter detected
[ 16.921982] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB2
[ 16.986926] systemd-udevd[1427]: error opening ATTR{/sys/devices/pci0000:00/0000:00:12.2/usb2/2-5/2-5:1.5/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory
[ 16.988089] uvcvideo: Found UVC 1.00 device WebCam SC-0311139N (2232:1020)
[ 16.993277] systemd-udevd[1428]: error opening ATTR{/sys/devices/pci0000:00/0000:00:12.2/usb2/2-5/2-5:1.6/host7/scsi_host/host7/link_power_management_policy} for writing: No such file or directory
[ 17.002663] input: WebCam SC-0311139N as /devices/pci0000:00/0000:00:13.2/usb3/3-4/3-4:1.0/input/input8
[ 17.011802] usbcore: registered new interface driver uvcvideo
[ 17.011808] USB Video Class driver (1.1.1)
[ 17.036157] snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
[ 17.055032] usbcore: registered new interface driver cdc_wdm
[ 17.076782] qmi_wwan 2-5:1.1: cdc-wdm0: USB WDM device
[ 17.085492] qmi_wwan 2-5:1.1 wwan0: register 'qmi_wwan' at usb-0000:00:12.2-5, WWAN/QMI device, 02:50:f3:00:00:00
[ 17.088340] usbcore: registered new interface driver qmi_wwan
[ 17.173910] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[ 17.402599] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 17.546699] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 17.549997] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 17.554480] lib80211_crypt: registered algorithm 'TKIP'
[ 17.557087] eth0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.112
[ 17.587070] sr0: scsi-1 drive
[ 17.587077] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 17.590908] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 17.764781] systemd-udevd[1426]: renamed network interface wwan0 to wwp0s18f2u5i1
[ 17.767245] systemd-sysctl[2747]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 17.772802] systemd-udevd[1427]: renamed network interface eth0 to wlp3s0
[ 17.776265] systemd-sysctl[2756]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 17.780048] systemd-sysctl[2755]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 17.786438] systemd-sysctl[2759]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 18.086526] usbcore: registered new interface driver btusb
[ 18.769655] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880136590af8 (20121018/exresop-422)
[ 18.769669] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 18.769676] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88013b4343e8), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 18.769691] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88013b434168), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 20.495319] vboxpci: IOMMU not found (not registered)
[ 22.447778] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.447784] Bluetooth: BNEP filters: protocol multicast
[ 22.447799] Bluetooth: BNEP socket layer initialized
[ 22.595480] Bluetooth: RFCOMM TTY layer initialized
[ 22.595500] Bluetooth: RFCOMM socket layer initialized
[ 22.595502] Bluetooth: RFCOMM ver 1.11
[ 24.407804] r8169 0000:05:00.0 enp5s0: link down
[ 24.815261] NET: Registered protocol family 10
[ 24.815665] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 31.811205] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=15,commit=0
[ 32.023742] WARNING! power/level is deprecated; use power/control instead
[ 162.594332] fuse init (API version 7.20)
[ 181.712247] xfce4-session[4386]: segfault at ffffffff00000000 ip 00007fe7c8be9537 sp 00007fffd9c3f2e0 error 5 in libglib-2.0.so.0.3600.1[7fe7c8b86000+fc000]
[ 183.784141] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 184.997887] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff88013aae2948 (20121018/exresop-422)
[ 184.997901] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 184.997908] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88013b4343e8), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 184.997923] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88013b434168), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 405.815701] NET: Registered protocol family 17
[ 1429.517360] xfce4-session[5257]: segfault at ffffffff00000000 ip 00007f53c2ee6537 sp 00007fff6060c2d0 error 5 in libglib-2.0.so.0.3600.1[7f53c2e83000+fc000]
[ 1430.198201] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=15,commit=600
[ 1431.620829] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=600,commit=600
[ 1432.769216] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 1434.176644] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880136590360 (20121018/exresop-422)
[ 1434.176667] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[ 1434.176680] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88013b4343e8), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 1434.176709] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88013b434168), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[ 1477.326788] usb 1-3: USB disconnect, device number 2
Any help appreciated.
Last edited by NinjaBus (2013-04-28 09:12:19)hadrons123 wrote:does it happen if you use the default arch kernel?
Yes, it keeps happening even with the default kernel when I try to shut down/suspend the computer (Alt-F4 key combination). I've read on some russian forum that it's the problem in recently upgraded glib2 (as they think), however downgrade didn't help. I'll try to check whether xfce4-session is to blame.
EDIT: It's definitely not xfce4-session, I tried previous version. Also, while running downgrade I saw that there is a newer version of glib2 in ARM, which is much more unstable, so I'm using 2.36.1-1.
Last edited by NinjaBus (2013-04-28 15:49:59) -
GNOME - Last pacman -Syu - Lost title bars [SOLVED]
Hi,
In a recent pacman -Syu I lost the titlebars in every window opened in GNOME, the only way to close/minimize/etc. is with the menus. It happens with different xorg drivers: fglrx, ati, radeon, vesa, so I think it can be related to some GNOME or XORG libs.
Any ideas?
Thank you.
Last edited by bodoke (2007-06-03 14:16:25)I had xgl-0.0.1.20070602 installed (it was installed in an upgrade last night). I reverted back to xgl-0.0.1-20070105-2 and all was fine again. If you haven't cleaned your cache and/or move it, do something like:
pacman -U /var/cache/pacman/pkg/xgl-0.0.1-20070105-2.pkg.tar.gz
If you have to, look in your /var/cache/pacman/pkg for an older xgl package and "pacman -U <file>" it, restart/reboot and things should be fine. -
Hello,
I recently switch to EFI boot interface with a GPT partitions table disk with ArchLinux. The efifb work correctly and is remplace by the radeondrmfb. Both work well. My problem is that I cannot use vesafb in EFI mode. Even with
radeon.modeset=0 video=vesafb
kernel parameters, it is always the efifb framebuffer who is in use. I try to set grub-efi-x86_64
set gfxmode=1366x768-32
set gfxpayload=keep
but the vesafb is nerver in use.
So, is the efifb the only available framebuffer in plus of Radeon KMS (I have an Ati card) in EFI mode? It look like if the vesafb is only for BIOS boot sheme.
The fglrx kernel module load, but the proprietary Ati Xorg driver fglrx do not work. It complain about a missing Section "Devices" in xorg.conf. With the xorg.conf
aticonfig --initial
configuration file, it do not work too. Radeon KMS is disabled and efifb is on. Nothing have been add or substract form the /etc/X11/xorg.conf.d/ directory.Unfortunately, I did not save the Xorg.0.log of fglrx. So I only wrote what I remember because I had to reinstall the xf86-video-ati drivers to have X working.
I have only one problem with Radeon/KMS/Xorg drivers in EFI and BIOS modes. When I go in full screen mode (Ctrl_Alt+f) with qemu(-kvm), I get a white/black screen flicking. I have to Control-Backspace-Delete and go back to console. Any modification to xorg.conf, drirc or anything fail. Without Xorg Radeon 3D acceleration or with Xorg fbdev driver, there is no problem. My Amd/Ati card is
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Trinity [Radeon HD 7520G]
The radeon kernel module use the ARUBA firmware.
The proprietary Ati drivers where working with Gentoo in BIOS mode on this laptop. It's the first and only time I try the proprietary Ati drivers with ArchLinux on this laptop. I am gone stay with the free drivers that I prefer anyway. Any hint is wellcome.
Thank-you for your help.
Last edited by Logicien (2013-01-07 01:03:25) -
[solved] Xorg 1.8.1 + FGLRX Mouse and keyboard don't work...
Beginning this week i installed Arch linux for the first time (several times infact) and i followed the installtion guide to get gnome working on my machine...
pacman -Sy
pacman -S xorg
pacman -S gnome gnome-system-tools gnome-extra gdm gksu
I also added the "fuse usblp" and " fam hal" entries to /etc/rc.conf in their respective sections as decribed there.
When i would reboot and type gdm the system would start up and i could configure everything else, but after reinstalling this morning this no longer works because the xorg got upgraded to a new version.
When i type gdm or startx in complains that "vesa" has no modes, so i installed and configure the fglrx drivers from the pacman source.
Now comes the actual problem, when i now type gdm or startx i get the graphical enviroment but my keyboard and mouse do not work and the computer is frozen.
I tried going to a diffirent tty but it won't take those commands either.
Does anyone have any idea what the problem could be ? i do not understand what is wrong....
The Solution - Because the vesa driver didn't work i installed fglrx and i deleted this folder called /etc/X11/xorg.conf.d as i had never seen it before and figured that i didn't need it if xorg.conf was present.
Leaving the folder intact solved the problem
it was a noobish mistake from a beginner, sorry folks
Last edited by Dennis Beekman (2010-06-21 10:17:04)Beginning this week i installed Arch linux for the first time (several times infact) and i followed the installtion guide to get gnome working on my machine...
pacman -Sy
pacman -S xorg
pacman -S gnome gnome-system-tools gnome-extra gdm gksu
I also added the "fuse usblp" and " fam hal" entries to /etc/rc.conf in their respective sections as decribed there.
When i would reboot and type gdm the system would start up and i could configure everything else, but after reinstalling this morning this no longer works because the xorg got upgraded to a new version.
When i type gdm or startx in complains that "vesa" has no modes, so i installed and configure the fglrx drivers from the pacman source.
Now comes the actual problem, when i now type gdm or startx i get the graphical enviroment but my keyboard and mouse do not work and the computer is frozen.
I tried going to a diffirent tty but it won't take those commands either.
Does anyone have any idea what the problem could be ? i do not understand what is wrong....
The Solution - Because the vesa driver didn't work i installed fglrx and i deleted this folder called /etc/X11/xorg.conf.d as i had never seen it before and figured that i didn't need it if xorg.conf was present.
Leaving the folder intact solved the problem
it was a noobish mistake from a beginner, sorry folks
Last edited by Dennis Beekman (2010-06-21 10:17:04) -
Can't fix fglrx/Xorg black screen issue, no matter what I try!
I've tried everything that I can think of or find online to fix this. Please help.
I'm getting what seems to be an oft-recurring issue where Xorg simply won't start when using the fglrx driver. It boots fine with VESA or Xfree86-ati, but using fglrx I just get a black screen that won't accept any input, although ssh'ing into the box while this is happening still works.
I've been reading forum posts for *days* now trying to get this to work. I've tried every combination of 12.4/12.6 drivers, Xorg 1.11/1.12 and modeset/nomodeset kernel parameters. I definitely do not have any radeon or other DRI modules compiled into my kernel. I have an HD4200, SLiM/Xfce4, and I'm using the proper catalyst-hd234k package. The fglrx module has been compiled for my kernel and added to my initramfs, and it loads at boot. lsmod reveals its presence and does *not* show 'radeon'. I have uninstalled every video driver aside from fglrx and Xfree86-vesa. Output does not seem to be going to HDMI instead. Switching consoles/typing blindly does not work, and I need to hold the power button for 5 seconds to shutdown. I've run aticonfig --initial and tried aticonfig --acpi-services=off, too.
I've tried *all* the different tweaks that I've found to try to make a working xorg.conf, but here's what I'm trying to use now:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
#Section "Module"
# Load "extmod"
# Load "dri"
# Load "glx"
# Load "dri2"
# Load "record"
# Load "dbe"
#EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:5:0"
Option "EXAPixmaps" "off"
Option "XAANoOffScreenPixmaps" "true"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050" "1440x900" "1366x768"
EndSubSection
EndSection
My Xorg log seems fantastically uninformative, since it seems to show the fglrx module loading and does not report any errors:
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 19.388] X Protocol Version 11, Revision 0
[ 19.388] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 19.388] Current Operating System: Linux splice 3.5.3-1-ARCH #1 SMP PREEMPT Tue Sep 18 00:11:37 EDT 2012 x86_64
[ 19.388] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=228ebc5f-ada6-4d9c-9e93-fc645085e5cd ro quiet nomodeset resume=/dev/sda5 init=/bin/systemd
[ 19.389] Build Date: 27 August 2012 08:04:39AM
[ 19.389]
[ 19.389] Current version of pixman: 0.26.2
[ 19.389] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.389] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.389] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 18 07:02:13 2012
[ 19.496] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.496] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.769] (==) ServerLayout "X.org Configured"
[ 19.769] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 19.769] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 19.790] (**) | |-->Device "aticonfig-Device[0]-0"
[ 19.790] (**) |-->Input Device "Mouse0"
[ 19.790] (**) |-->Input Device "Keyboard0"
[ 19.790] (==) Automatically adding devices
[ 19.790] (==) Automatically enabling devices
[ 19.993] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.993] Entry deleted from font path.
[ 20.193] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 20.193] Entry deleted from font path.
[ 20.193] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 20.195] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 20.196] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 20.196] Entry deleted from font path.
[ 20.196] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 20.196] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 20.196] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 20.196] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 20.196] (**) Extension "Composite" is disabled
[ 20.196] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 20.196] (WW) Disabling Mouse0
[ 20.196] (WW) Disabling Keyboard0
[ 20.196] (II) Loader magic: 0x7c8b00
[ 20.196] (II) Module ABI versions:
[ 20.196] X.Org ANSI C Emulation: 0.4
[ 20.196] X.Org Video Driver: 12.1
[ 20.196] X.Org XInput driver : 16.0
[ 20.196] X.Org Server Extension : 6.0
[ 20.198] (--) PCI:*(0:1:5:0) 1002:9712:17aa:21b8 rev 0, Mem @ 0xc0000000/268435456, 0xd0400000/65536, 0xd0300000/1048576, I/O @ 0x00009000/256
[ 20.198] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.198] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dri2" will be loaded by default.
[ 20.198] (II) LoadModule: "extmod"
[ 20.439] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 20.468] (II) Module extmod: vendor="X.Org Foundation"
[ 20.468] compiled for 1.12.4, module version = 1.0.0
[ 20.468] Module class: X.Org Server Extension
[ 20.468] ABI class: X.Org Server Extension, version 6.0
[ 20.468] (II) Loading extension MIT-SCREEN-SAVER
[ 20.468] (II) Loading extension XFree86-VidModeExtension
[ 20.468] (II) Loading extension XFree86-DGA
[ 20.468] (II) Loading extension DPMS
[ 20.468] (II) Loading extension XVideo
[ 20.468] (II) Loading extension XVideo-MotionCompensation
[ 20.468] (II) Loading extension X-Resource
[ 20.468] (II) LoadModule: "dri"
[ 20.468] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.545] (II) Module dri: vendor="X.Org Foundation"
[ 20.545] compiled for 1.12.4, module version = 1.0.0
[ 20.545] ABI class: X.Org Server Extension, version 6.0
[ 20.545] (II) Loading extension XFree86-DRI
[ 20.545] (II) LoadModule: "glx"
[ 20.554] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.685] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 20.685] compiled for 6.9.0, module version = 1.0.0
[ 20.685] (II) Loading extension GLX
[ 20.685] (II) LoadModule: "dri"
[ 20.685] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.686] (II) Module dri: vendor="X.Org Foundation"
[ 20.686] compiled for 1.12.4, module version = 1.0.0
[ 20.686] ABI class: X.Org Server Extension, version 6.0
[ 20.686] (II) LoadModule: "record"
[ 20.686] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 20.716] (II) Module record: vendor="X.Org Foundation"
[ 20.716] compiled for 1.12.4, module version = 1.13.0
[ 20.716] Module class: X.Org Server Extension
[ 20.716] ABI class: X.Org Server Extension, version 6.0
[ 20.716] (II) Loading extension RECORD
[ 20.716] (II) LoadModule: "dbe"
[ 20.717] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 20.742] (II) Module dbe: vendor="X.Org Foundation"
[ 20.742] compiled for 1.12.4, module version = 1.0.0
[ 20.743] Module class: X.Org Server Extension
[ 20.743] ABI class: X.Org Server Extension, version 6.0
[ 20.743] (II) Loading extension DOUBLE-BUFFER
[ 20.743] (II) LoadModule: "dri2"
[ 20.743] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.811] (II) Module dri2: vendor="X.Org Foundation"
[ 20.811] compiled for 1.12.4, module version = 1.2.0
[ 20.811] ABI class: X.Org Server Extension, version 6.0
[ 20.811] (II) Loading extension DRI2
[ 20.811] (II) LoadModule: "fglrx"
[ 20.811] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 22.869] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 22.869] compiled for 1.4.99.906, module version = 8.97.2
[ 22.869] Module class: X.Org Video Driver
[ 22.871] (II) Loading sub module "fglrxdrm"
[ 22.871] (II) LoadModule: "fglrxdrm"
[ 22.871] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 22.979] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 22.979] compiled for 1.4.99.906, module version = 8.97.2
[ 22.979] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 22.979] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
[ 22.979] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
[ 22.979] (++) using VT number 7
[ 23.041] (WW) Falling back to old probe method for fglrx
[ 23.355] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 23.449] (--) Chipset Supported AMD Graphics Processor (0x9712) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
[ 23.465] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 23.477] (II) AMD Video driver is signed
[ 23.478] (II) fglrx(0): pEnt->device->identifier=0x1cdc440
[ 23.478] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 23.478] (II) Loading sub module "vgahw"
[ 23.478] (II) LoadModule: "vgahw"
[ 23.478] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 23.488] (II) Module vgahw: vendor="X.Org Foundation"
[ 23.488] compiled for 1.12.4, module version = 0.1.0
[ 23.488] ABI class: X.Org Video Driver, version 12.1
[ 23.489] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 23.489] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 23.489] (==) fglrx(0): Default visual is TrueColor
[ 23.489] (**) fglrx(0): Option "DPMS" "true"
[ 23.489] (==) fglrx(0): RGB weight 888
[ 23.489] (II) fglrx(0): Using 8 bits per RGB
[ 23.489] (==) fglrx(0): Buffer Tiling is ON
[ 23.508] (II) Loading sub module "fglrxdrm"
[ 23.508] (II) LoadModule: "fglrxdrm"
[ 23.508] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 23.508] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 23.508] compiled for 1.4.99.906, module version = 8.97.2
[ 23.525] ukiDynamicMajor: found major device number 251
[ 23.526] ukiDynamicMajor: found major device number 251
[ 23.526] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 23.526] ukiOpenDevice: node name is /dev/ati/card0
[ 23.526] ukiOpenDevice: open result is 12, (OK)
[ 23.526] ukiOpenByBusid: ukiOpenMinor returns 12
[ 23.526] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 23.526] (**) fglrx(0): NoAccel = NO
[ 23.526] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 23.526] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4200 Series" (Chipset = 0x9712)
[ 23.526] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x21b8)
[ 23.526] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 23.526] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 23.526] (--) fglrx(0): MMIO registers at 0xd0400000
[ 23.526] (--) fglrx(0): I/O port at 0x00009000
[ 23.526] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 23.555] (II) fglrx(0): ATIF platform detected
[ 23.556] (II) fglrx(0): AC Adapter is used
[ 23.576] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 23.582] (II) Loading sub module "vbe"
[ 23.582] (II) LoadModule: "vbe"
[ 23.603] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 23.617] (II) Module vbe: vendor="X.Org Foundation"
[ 23.617] compiled for 1.12.4, module version = 1.1.0
[ 23.617] ABI class: X.Org Video Driver, version 12.1
[ 23.629] (II) fglrx(0): VESA BIOS detected
[ 23.629] (II) fglrx(0): VESA VBE Version 3.0
[ 23.629] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 23.629] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 23.629] (II) fglrx(0): VESA VBE OEM Software Rev: 10.94
[ 23.629] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 23.629] (II) fglrx(0): VESA VBE OEM Product: RS880M
[ 23.629] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 23.652] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 23.652] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
[ 23.652] (II) fglrx(0): PCIE card detected
[ 23.652] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 23.652] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 23.655] (II) fglrx(0): Using adapter: 1:5.0.
[ 23.663] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 23.691] (II) fglrx(0): Interrupt handler installed at IRQ 18.
[ 23.691] (II) fglrx(0): RandR 1.2 support is enabled!
[ 23.691] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 23.692] (==) fglrx(0): Center Mode is disabled
[ 23.692] (II) Loading sub module "fb"
[ 23.692] (II) LoadModule: "fb"
[ 23.692] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.722] (II) Module fb: vendor="X.Org Foundation"
[ 23.722] compiled for 1.12.4, module version = 1.0.0
[ 23.722] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.722] (II) Loading sub module "ddc"
[ 23.722] (II) LoadModule: "ddc"
[ 23.722] (II) Module "ddc" already built-in
fglrxinfo while running Xorg without an xorg.conf gives me this:
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 135 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 12
Current serial number in output stream: 12
And in a console it tells me that it can't open display(null)... all of which I suspect is expected behaviour when the driver is not actually in use. I just wish something would tell me what's actually *wrong*, here, instead of just expecting me to magically figure out exactly the right configuration that will actually let me use fglrx.
I... I just want to be able to play minecraft. :`(
Last edited by Medlam (2012-09-18 13:48:42)I'm sure you've tried reading https://bbs.archlinux.org/viewtopic.php?id=57084
and http://wiki.cchtml.com/index.php/Configuring
and I'm sure you've done
aticonfig --initial
I had to use https://wiki.archlinux.org/index.php/AT … leshooting, specifically the part about disabling EXAPixmaps to make my card work.
What model is your ATI card? that would help. A LOT of ATI cards were dropped from proprietary support with the Catalyst driver. -
Compiz Fusion doesn't work with Xorg 7.3 (fglrx)
I recently reinstalled due to multiple issues. Now after the upgrade to Xorg 7.3, I am unable to start Compiz Fusion. I get this from fusion-icon:
* Detected Session: kde
* Searching for installed applications...
* No GLX_EXT_texture_from_pixmap with direct rendering context
... nor with indirect rendering, this isn't going to work!
* Using the GTK Interface
* KWin is already running
my xorg.conf:
Auto-generated by Archie mkxcfg
Section "ServerLayout"
# Serial Mouse not detected
# USB Mouse not detected
Identifier "Xorg Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AIGLX" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
VertRefresh 60
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
and my Xorg.0.log
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/knights-desktop:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH x86_64
Current Operating System: Linux knights-desktop 2.6.23-ARCH #1 SMP PREEMPT Sat Oct 27 10:52:38 CEST 2007 x86_64
Build Date: 07 November 2007 10:56:33AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 18 09:27:02 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Keyboard0"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(==) |-->Input Device "<default pointer>"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7af4e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2770 card 1028,01ab rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2771 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1028,01ab rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1028,01ab rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1028,01ab rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1028,01ab rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1028,01ab rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev e1 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b8 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,27df card 1028,01ab rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,27c0 card 1028,01ab rev 01 class 01,01,8f hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1028,01ab rev 01 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5b60 card 1002,0302 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5b70 card 1002,0303 rev 00 class 03,80,00 hdr 00
(II) PCI: 03:02:0: chip 1102,0004 card 1102,2006 rev 04 class 04,01,00 hdr 80
(II) PCI: 03:02:1: chip 1102,7003 card 1102,0040 rev 04 class 09,80,00 hdr 80
(II) PCI: 03:02:2: chip 1102,4001 card 1102,0010 rev 04 class 0c,00,10 hdr 80
(II) PCI: 03:03:0: chip 14e4,4318 card 14e4,7001 rev 02 class 02,80,00 hdr 00
(II) PCI: 03:08:0: chip 8086,27dc card 1028,01ab rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xefd00000 - 0xefefffff (0x200000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xefc00000 - 0xefcfffff (0x100000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[b]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xefb00000 - 0xefbfffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] rev 0, Mem @ 0xe0000000/27, 0xefde0000/16, I/O @ 0xdc00/8, BIOS @ 0xefe00000/17
(--) PCI: (1:0:1) ATI Technologies Inc RV370 [Radeon X300SE] rev 0, Mem @ 0xefdf0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xefbf9000 - 0xefbf9fff (0x1000) MX[b]
[1] -1 0 0xefbfa000 - 0xefbfbfff (0x2000) MX[b]
[2] -1 0 0xefbfc000 - 0xefbfffff (0x4000) MX[b]
[3] -1 0 0xefbf8800 - 0xefbf8fff (0x800) MX[b]
[4] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
[5] -1 0 0xefdf0000 - 0xefdfffff (0x10000) MX[b](B)
[6] -1 0 0xefe00000 - 0xefe1ffff (0x20000) MX[b](B)
[7] -1 0 0xefde0000 - 0xefdeffff (0x10000) MX[b](B)
[8] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
[9] -1 0 0x0000ccc0 - 0x0000ccff (0x40) IX[b]
[10] -1 0 0x0000cc78 - 0x0000cc7f (0x8) IX[b]
[11] -1 0 0x0000cc80 - 0x0000ccbf (0x40) IX[b]
[12] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[b]
[13] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[b]
[14] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[b]
[15] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[b]
[16] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[b]
[17] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[18] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[19] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[20] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[b]
[24] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[b]
[25] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[b]
[26] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[b]
[27] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xefbf9000 - 0xefbf9fff (0x1000) MX[b]
[1] -1 0 0xefbfa000 - 0xefbfbfff (0x2000) MX[b]
[2] -1 0 0xefbfc000 - 0xefbfffff (0x4000) MX[b]
[3] -1 0 0xefbf8800 - 0xefbf8fff (0x800) MX[b]
[4] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
[5] -1 0 0xefdf0000 - 0xefdfffff (0x10000) MX[b](B)
[6] -1 0 0xefe00000 - 0xefe1ffff (0x20000) MX[b](B)
[7] -1 0 0xefde0000 - 0xefdeffff (0x10000) MX[b](B)
[8] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
[9] -1 0 0x0000ccc0 - 0x0000ccff (0x40) IX[b]
[10] -1 0 0x0000cc78 - 0x0000cc7f (0x8) IX[b]
[11] -1 0 0x0000cc80 - 0x0000ccbf (0x40) IX[b]
[12] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[b]
[13] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[b]
[14] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[b]
[15] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[b]
[16] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[b]
[17] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[18] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[19] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[20] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[b]
[24] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[b]
[25] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[b]
[26] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[b]
[27] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xefbf9000 - 0xefbf9fff (0x1000) MX[b]
[5] -1 0 0xefbfa000 - 0xefbfbfff (0x2000) MX[b]
[6] -1 0 0xefbfc000 - 0xefbfffff (0x4000) MX[b]
[7] -1 0 0xefbf8800 - 0xefbf8fff (0x800) MX[b]
[8] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
[9] -1 0 0xefdf0000 - 0xefdfffff (0x10000) MX[b](B)
[10] -1 0 0xefe00000 - 0xefe1ffff (0x20000) MX[b](B)
[11] -1 0 0xefde0000 - 0xefdeffff (0x10000) MX[b](B)
[12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000ccc0 - 0x0000ccff (0x40) IX[b]
[16] -1 0 0x0000cc78 - 0x0000cc7f (0x8) IX[b]
[17] -1 0 0x0000cc80 - 0x0000ccbf (0x40) IX[b]
[18] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[b]
[19] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[b]
[20] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[b]
[21] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[b]
[22] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[b]
[23] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[24] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[25] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[26] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[27] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[b]
[30] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[b]
[31] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[b]
[32] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[b]
[33] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.42.3
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.42.3
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.423.2
(II) ATI Proprietary Linux Driver Build Date: Oct 19 2007 16:14:11
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x5B60) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xefbf9000 - 0xefbf9fff (0x1000) MX[b]
[5] -1 0 0xefbfa000 - 0xefbfbfff (0x2000) MX[b]
[6] -1 0 0xefbfc000 - 0xefbfffff (0x4000) MX[b]
[7] -1 0 0xefbf8800 - 0xefbf8fff (0x800) MX[b]
[8] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
[9] -1 0 0xefdf0000 - 0xefdfffff (0x10000) MX[b](B)
[10] -1 0 0xefe00000 - 0xefe1ffff (0x20000) MX[b](B)
[11] -1 0 0xefde0000 - 0xefdeffff (0x10000) MX[b](B)
[12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000ccc0 - 0x0000ccff (0x40) IX[b]
[16] -1 0 0x0000cc78 - 0x0000cc7f (0x8) IX[b]
[17] -1 0 0x0000cc80 - 0x0000ccbf (0x40) IX[b]
[18] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[b]
[19] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[b]
[20] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[b]
[21] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[b]
[22] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[b]
[23] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[24] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[25] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[26] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[27] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[b]
[30] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[b]
[31] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[b]
[32] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[b]
[33] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x7ed860
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xefbf9000 - 0xefbf9fff (0x1000) MX[b]
[5] -1 0 0xefbfa000 - 0xefbfbfff (0x2000) MX[b]
[6] -1 0 0xefbfc000 - 0xefbfffff (0x4000) MX[b]
[7] -1 0 0xefbf8800 - 0xefbf8fff (0x800) MX[b]
[8] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
[9] -1 0 0xefdf0000 - 0xefdfffff (0x10000) MX[b](B)
[10] -1 0 0xefe00000 - 0xefe1ffff (0x20000) MX[b](B)
[11] -1 0 0xefde0000 - 0xefdeffff (0x10000) MX[b](B)
[12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000ccc0 - 0x0000ccff (0x40) IX[b]
[19] -1 0 0x0000cc78 - 0x0000cc7f (0x8) IX[b]
[20] -1 0 0x0000cc80 - 0x0000ccbf (0x40) IX[b]
[21] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[b]
[22] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[b]
[23] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[b]
[24] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[b]
[25] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[b]
[26] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[27] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[28] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[29] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[30] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[32] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[b]
[33] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[b]
[34] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[b]
[35] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[b]
[36] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(II) fglrx(0): Creating default Display subsection in Screen section
"aticonfig-Screen[0]" for depth/fbbpp 24/32
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "dri" "true"
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "Radeon X300/X550/X1050 Series" (Chipset = 0x5b60)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0302)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xefde0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI RV380
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: V380
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.42.3
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): PCIE card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: DEL Model: a00b Serial#: 809061708
(II) fglrx(0): Year: 2005 Week: 28
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.340 greenX: 0.279 greenY: 0.619
(II) fglrx(0): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: 0.330
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 140 MHz
(II) fglrx(0): Serial No: U494157809ML
(II) fglrx(0): Monitor name: DELL E173FP
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0010ac0ba04c4d3930
(II) fglrx(0): 1c0f010368221b78eecaf6a357479e23
(II) fglrx(0): 114f54a54b00714f8180010101010101
(II) fglrx(0): 010101010101302a009851002a403070
(II) fglrx(0): 1300520e1100001e000000fd00384b1f
(II) fglrx(0): 500e000a202020202020000000ff0055
(II) fglrx(0): 3439343135373830394d4c0a000000fc
(II) fglrx(0): 0044454c4c204531373346500a2000c7
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 324/196MHz @ 50Hz [enable load balancing]
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 31 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 (80.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync (74.6 kHz)
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 (67.5 kHz)
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"x70.0 96.76 1152 1224 1344 1536 864 865 868 900 +hsync (63.0 kHz)
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): *Mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480"x60.0 38.16 1024 1048 1152 1280 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"x60.0 31.48 848 864 952 1056 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): *Mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"x60.0 32.66 720 744 816 912 576 577 580 597 +hsync (35.8 kHz)
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(--) fglrx(0): Display dimensions: (340, 270) mm
(--) fglrx(0): DPI set to (95, 96)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 (80.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync (74.6 kHz)
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 (67.5 kHz)
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"x70.0 96.76 1152 1224 1344 1536 864 865 868 900 +hsync (63.0 kHz)
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): *Mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480"x60.0 38.16 1024 1048 1152 1280 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"x60.0 31.48 848 864 952 1056 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): *Mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"x60.0 32.66 720 744 816 912 576 577 580 597 +hsync (35.8 kHz)
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): HPV inactive
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 256 MB
(II) fglrx(0): [pcie] 258048 kB allocated with handle 0xdeadbeef
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xefde0000 - 0xefdeffff (0x10000) MX[b]
[1] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xefbf9000 - 0xefbf9fff (0x1000) MX[b]
[7] -1 0 0xefbfa000 - 0xefbfbfff (0x2000) MX[b]
[8] -1 0 0xefbfc000 - 0xefbfffff (0x4000) MX[b]
[9] -1 0 0xefbf8800 - 0xefbf8fff (0x800) MX[b]
[10] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
[11] -1 0 0xefdf0000 - 0xefdfffff (0x10000) MX[b](B)
[12] -1 0 0xefe00000 - 0xefe1ffff (0x20000) MX[b](B)
[13] -1 0 0xefde0000 - 0xefdeffff (0x10000) MX[b](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[18] 0 0 0x0000dc00 - 0x0000dcff (0x100) IX[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x0000ccc0 - 0x0000ccff (0x40) IX[b]
[22] -1 0 0x0000cc78 - 0x0000cc7f (0x8) IX[b]
[23] -1 0 0x0000cc80 - 0x0000ccbf (0x40) IX[b]
[24] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[b]
[25] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[b]
[26] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[b]
[27] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[b]
[28] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[b]
[29] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[30] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
[31] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[32] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[33] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[34] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[35] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[b]
[36] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[b]
[37] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[b]
[38] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[b]
[39] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b](B)
[40] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[41] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(WW) fglrx(0): could not detect X server version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [drm] installed DRM signal handler
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.42.3
(II) fglrx(0): Date: Oct 19 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.23-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00005000
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x00701c00
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1435)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 411
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(**) fglrx(0): Option "XaaNoOffscreenPixmaps" "true"
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
30 128x128 slots
(II) fglrx(0): Acceleration enabled
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
[atiddx] ASYNCIO init succeed!
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard0: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button
Any ideas?See this thread
X.org 7.3 + fglrx 8.42.3 and beryl/compiz/compiz fusion is a no go. Try a search, or take a look at the phoronix forums.
Last edited by BJJ (2007-11-18 22:40:43) -
*SOLVED* - 2D draw very slow, intel / fglrx Xorg driver
Hey all,
My very first support post to the forums
I have an issue on a few computers whereby the 2D drawing in X is very slow. This happens on my laptop with Intel vga and also on a desktop when using the proprietary fglrx driver. I did not have this problem a few months ago when using stable. At that time, I installed testing and discovered the problem, so I went back to stable. Some time later an update to Xorg came into stable and since then the problem is now in the that tree also.
I thought it might be the new GEM stuff for the Intel driver, so I installed the 2.6.28 kernel when it was released - it did not solve the problem. Installing an NVIDIA card into the desktop box does solves the problem (can't do that for my laptop!). Because it's happening with the intel and fglrx drivers, but not with NVIDIA, I think it might be a problem with some Xorg component that the NVIDIA driver performs itself? But I've no idea..
Essentially, I'm using wmii as my desktop, which is a tiled window manager. Creating a new terminal window, switching between them and closing them all is very slow (taking a second or more), when it should be pretty much instantaneous.
When doing these things, Xorg takes up 90% CPU usage. By comparison, on the same laptop under Debian it only uses 10% CPU (and the problem does not exist).
I have created two desktop screencasts of what I mean. In the videos I am quickly opening a bunch of xterms and then later holding down 'switch between terminals', then holding down 'close terminal'. I run htop to show the CPU usage.
Arch, 4.9 MB, OGV - http://christophersmart.com/videos/archlinux-wmii.ogv
Debian, 5.7 MB, OGV- http://christophersmart.com/videos/debian-wmii.ogv
Any ideas?
Thanks a bunch!
Chris
Edit: FYI, the desktop has an Intel Core2 CPU with 8GB RAM and 2 x WD Raptor drives in RAID 0. With an ATI card, wmii is unusable.
Last edited by csmart (2009-01-17 00:19:57)Well I first discovered the problem with the 'intel' driver and later when I set up Arch Linux on a desktop I was met with the same issue. I think it might be some part of Xorg that they both share, but it's not just a problem with the catalyst driver.. unfortunately
-
[SOLVED] fglrx + xorg = black screen / freeze
Hi,
I simply can't run
startx
When I try, everything freezes, screen goes blank.
I've done clean install, and done just this:
# pacman -S xorg-server xorg-xinit xorg-utils xorg-server-utils xterm
# pacman -S catalyst catalyst-utils /* added catalyst.apocalypsus.net/repo in pacman.conf */
# aticonfig --initial
# reboot
# startx
--> FREEZE
I'm confused as this worked on my other machine. I have empty Xorg.log file and I've tried
aticonfig --acpi-services=off
as advised on wiki - but nothing changed.
Please help
Last edited by 10robinho (2012-01-06 01:53:43)Thanks for the reply!
No, keyboard indicators are not blinking (no num lock light or anything).
Of course, we are talking about /var/log/Xorg.0.log.
I've realized that it is even not created now.
(I've tried with empty xorg.conf, just to get some log errors, and after I returned fglrx version of xorg.conf and run startx log was empty)
I haven't made any ~/.xinitrc (I think that it should run default one from /etc/X11, right?)
I've tried with ~/.xinitrc that has just "exec xterm"
nothing worked...
Maybe you are looking for
-
I am trying to acquire several cycles of a waveform and save it to an excell file.
Only one or two (I don't remember which) of the values shows up on the excell spreadsheet, the spreadsheet remains otherwise empty. I know that the waveform is being captured by the DAQ because it is graphed, and it looks fine. If someone could point
-
Photosmart 7520: Scan to Email
Hi, I have created my email adr on the printer, and veryfied my mail adr. with the PIN code, that was send to me from HP But when I start the process by cliking (on the printer), "Scan" --> "Scan to Email" --> Select my Email Account --> Select type
-
Cannot change to video in iphoto.
I cannot change from photo to video in my camera programme. I use iphone 4S version 7.1 Maybe it has somethon to with the mystery when I import photos to my computer iphoto. The pictures turn around to upside down position.
-
hi, can anyone tell me what is meant by BROWSER,where we have to use BROWSER in SAP SRM,and how it is work b/w R/3 to SRM.Kindly send answers immediatly to my mail. with regards to all.
-
HourGlass Cursor on top of Full Screen Video
When I run Quick Time video at full screen size, my cursor goes to an hourglass and stays on top of the video. How can I eliminate my cursor??? Thanks