Xorg.conf.d not created? [SOLVED]

Ok, I'm new to Arch from Ubuntu/Mint/Crunchbang.  I'm sure that I'm missing something easy here but I can't seem to find any clue as to what. 
I'm trying to get a working system going, and everything seems fine, but when I run startx or xinit to start xorg I have no functionality of my keyboard or mouse.  I assumed that I could look in the /etc/X11/xorg.conf.d/ folder to see what was happening but the folder didn't exist.  Is evdev not finding my hardware? I had the same result after I added the keyboard and mouse drivers as well.
Thanks!
Last edited by jbritton (2011-03-21 02:02:46)

jbritton wrote:Ok, so I reinstalled everything, and followed the new instruction in the Beginners Guide to install # pacman -S xorg-twm xorg-xclock xterm
Did you start at that part of the guide, or all the way back to the part that says:
Wiki wrote:
Install the base packages:
# pacman -S xorg-server xorg-xinit xorg-utils xorg-server-utils
The instructions for xorg-twm xorg-xclock and xterm were to give a really basic gui for testing X, but wouldn't pull in xorg-server which is what should give you xorg.conf.d and also pulls in the evdev driver as a dependency.
I noticed that hal was installed as apart of this. Anyone have another suggestion?  I checked in /etc/X11 and the xorg.conf.d folder is still missing.
That part seems odd, could you be using an out of date mirror? The current version of the xorg-server package is 1.9.4.901-1

Similar Messages

  • Xorg.conf.d not loading when thinkpad docked

    When installing arch on my workstation, a lenovo thinkpad t530, it all worked basically fine, just some issues with setting boot partitions and such. The problem I have that I haven't been able to solve is that if I start X while the laptop is docked, to a series 3 dock with an extra monitor and some peripherals connected, none of the /etc/X11/xorg.conf.d files seems to be loaded. This mostly shows by both the screens showing a cloned desktop with 1024x768 (or similar low resolution) and my keyboard configuration isn't loaded. All this works perfectly fine when starting X when the laptop isn't docked and I can't find anything strange about it in the log.
    I currently, partly, solve this by calling xrandr and setxkbmap with the correct arguments in ~/.xinit but I really don't like that solution.
    So my question is: Is there any known issues that could cause this or where should I start looking for the cause?
    I'm not using any desktop environment, display manager or similar, just starting dwm from ~/.xinit when running xinit
    For stackexchange reputation it's possible to answer the question at unix.stackexchange too:
    http://unix.stackexchange.com/questions … ile-docked

    jbritton wrote:Ok, so I reinstalled everything, and followed the new instruction in the Beginners Guide to install # pacman -S xorg-twm xorg-xclock xterm
    Did you start at that part of the guide, or all the way back to the part that says:
    Wiki wrote:
    Install the base packages:
    # pacman -S xorg-server xorg-xinit xorg-utils xorg-server-utils
    The instructions for xorg-twm xorg-xclock and xterm were to give a really basic gui for testing X, but wouldn't pull in xorg-server which is what should give you xorg.conf.d and also pulls in the evdev driver as a dependency.
    I noticed that hal was installed as apart of this. Anyone have another suggestion?  I checked in /etc/X11 and the xorg.conf.d folder is still missing.
    That part seems odd, could you be using an out of date mirror? The current version of the xorg-server package is 1.9.4.901-1

  • Sample xorg.conf files not found

    Hi, everyone
    I'm installing xorg, and need to refer some sample xorg.conf, but some of the links on the xorg wiki are not found. I think they should be updated.

    Thank you for reply!
    I have set up gnome, but using open source driver (vesa) for my  graphic card (VGA compatible controller: ATI Technologies Inc M22 [Mobility Radeon X300])

  • USB flash disk mount points not created [SOLVED]

    I am having a problem where my USB flash disk is not always being mounted after being detected by KDE. I have just installed Arch 2007.05, updated it and installed KDEmod. Here's what happens when I plug in a device.
    1. I insert the device, KDE detects the device and shows the KDE Mount Daemon dialog. "Open in New Window" or "Do Nothing" are the two available options.
    2. At this point, my device shows up in system:/media (in Konqueror), but it is not mounted. When I place the cursor over the device in Konqueror a popup with the device's label and the text "Unmounted Removable Medium" appears. There is no corresponding directory in the /media directory in my file system.
    3. In the KDE Daemon window I select "Do Nothing" by either double-clicking it or selecting it and clicking OK.
    4, My device does not get mounted. This is annoying since most of the time I just want it mounted so I can do some command-line work.
    If in the KDE Daemon window if I select "Open in New Window" the device is mounted and the corresponding directory appears in my /media directory. Also, if I select "Do Nothing" but then later navigate into the contents of the device in Konqueror, at that point the device is mounted and the corresponding directory appears in my /media directory. When my device is plugged in, but not mounted there is a "Mount" option in the right-click context menu, but I want it to automatically mount.
    On my other machine with openSUSE, the drive is mounted even if you choose "Do Nothing" in the KDE Daemon window. That way seems more correct, because if I plug a device in, I most likely want it mounted. (I know there are some cases where this might not be true, but those cases are certainly not the normal use casese.) Now I have to open Konqueror just to get the drive to mount. It seems that the drive should be mounted no matter what you choose in the KDE Daemon window.
    Now, is this normal KDE or Arch behavior or is it something that can be adjusted or fixed?
    Thanks in advance.
    Last edited by jbromley (2007-10-22 07:22:08)

    Turing - imagine that! For some reason it never occurred to me to check the properties of the unmounted volume. Well, you learn something every day.
    In the meantime, I decided that maybe "Do Nothing" should do just that and I should perhaps add a service to mount the drive, but not bring up any windows. Here's what I did.
    1. Create a mount_vol.sh shell script with the following contents.
    #!/bin/bash
    udi=$(dcop kded mediamanager properties $1 2>/dev/null | head -n 1)
    if test -n "$udi"; then
    dcop kded mediamanager mount "$udi" >/dev/null 2>&1
    fi
    2. chmod +x mount_vol.sh.
    3. Move the script somewhere like /usr/local/bin.
    4. Plug in some removable device, in the KDE Daemon window click "Configure..."
    5. In the KDE Control Module dialog that appears click "Add"
    6. Give the service a name like "Mount Removable Medium", click the X icon to select a service icon, select "Unmounted Removable Medium" under "Available medium types" and click the right arrow. For the command use "/usr/local/bin/mount_vol.sh %u.
    7. Click OK.
    Now when the KDE Daemon action dialog appears, there will be the option to just mount it. You can of course use this same script for other medium types.
    Regards.

  • SOLVED: Created /etc/X11/xorg.conf, now system won't boot.

    I was trying to solve an issue with display resolution not sticking and it was suggested to me that I create an /etc/X11/xorg.conf.
    I created the file and put in the lines that I had in my .xprofile related to xrandr.
    Now... my system will not boot. It appears to get hung up trying to detect my ethernet connection. I tried Ctrl-Alt-F1 to avoid X windowing, no dice.
    What's more, my system rescue pen drive appears to have died. I still have my Arch install CD.
    All I want to do is delete xorg.conf. My arch root is a logical volume so I have no idea how to mount it after I boot from the Arch install CD, or if I can even do this.
    Update: So embarrassing, my mount command was wrong. Once I did something that looked like this:
    mount /dev/VolGroup0/root /mnt/
    I was able to get into /etc/X11 and delete xorg. conf. Rebooted and all appears well.
    Last edited by testingwithfire (2014-06-02 01:36:07)

    For mounting LVM, this page should probably help: https://wiki.archlinux.org/index.php/LV … al_volumes
    Once in, then it should be easy.

  • Auto created xorg.conf

    I have noticed that when xorg automatically creates xorg.conf settings It works better than when I use my own xorg.conf.. I also get a lot fewer Warnings in xorg.log.
    The question is, where is the autoconfigured xorg.conf?? I would really like to take a look at it, and apply it to my xorg.conf...

    I also get this problem with my xorg.conf, but not with xorgs auto:
    [12:19 root ~]# glxinfo
    name of display: :0.0
    libGL warning: 3D driver claims to not support visual 0x67
    display: :0 screen: 0
    direct rendering: Yes
    Also this problem:
    the pager in kdemod, I have it set to show the wallpapers, but with my xorg.conf The first desktop in the pager shows nothing, but other 3 desktops shows the wallpaper background..
    my xorg.conf
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "USB Mouse" "CorePointer"
    Option "AIGLX" "true"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" ""
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "ExplorerPS/2"
    Option "Buttons" "5"
    Option "ZAxisMapping" "4 5"
    Option "ButtonMapping" "1 2 3 6 7"
    EndSection
    Section "Monitor"
    Identifier "LCD Monitor"
    Option "DPMS"
    HorizSync 28.0 - 96.0
    VertRefresh 50.0 - 75.0
    # 1280x800 @ 75.00 Hz (GTF) hsync: 62.62 kHz; pclk: 107.21 MHz
    Modeline "1280x800_75.00" 107.21 1280 1360 1496 1712 800 801 804 835 -HSync +Vsync
    EndSection
    Section "Device"
    Identifier "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Device Number 1"
    Driver "i810" # xf86-video-i810 Package
    BusID "PCI:0:2:0" # Reported by lspci
    # VideoRam
    Screen 0
    # Option "XAANoOffscreenPixmaps" "true" # AIGLX (XAA), EXA better for i810.
    Option "DRI" "true" # AIGLX
    Option "AccelMethod" "EXA" # Xaa is old but stable, EXA is new and better.
    Option "TripleBuffer" "true" # better 3d performance, but worse 2D/3D mix.
    endSection
    Section "Device"
    Identifier "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Device Number 2"
    Driver "i810"
    BusId "PCI:0:2:1"
    endSection
    Section "Screen"
    Identifier "Screen0"
    Device "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Device Number 1"
    Monitor "LCD Monitor"
    DefaultColorDepth 24
    SubSection "Display"
    Depth 16
    Modes "1280x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1280x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1280x800" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "Extensions" # AIGLX
    Option "Composite" "Enable"
    EndSection
    Section "DRI"
    Mode 0666
    EndSection

  • Mythtv xorg.conf 6800gt dvi - hdmi 34xbr970 tv.. no HD

    All,
    I am running arch on a custom machine with a geforce 6800GT agp dual dvi outs
    i have my lcd connected to dv1 and my dvi->hdmi to dvi2..
    The modes for my xorg.conf are not validating and the tv is black except for
    the mouse when i scroll over to the right side of my screen..
    I think my modelines are jacked or a bug is in the nvidia driver...
    ########### XORG.CONF
    Section "Files"
        RgbPath         "/usr/share/X11/rgb"
        ModulePath      "/usr/lib/xorg/modules"
        FontPath        "/usr/share/fonts/misc:unscaled"
        FontPath        "/usr/share/fonts/misc"
        FontPath        "/usr/share/fonts/75dpi:unscaled"
        FontPath        "/usr/share/fonts/75dpi"
        FontPath        "/usr/share/fonts/100dpi:unscaled"
        FontPath        "/usr/share/fonts/100dpi"
        FontPath        "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
        Load           "ddc"  # ddc probing of monitor
        Load           "dbe"
        Load           "extmod"
        Load           "glx"
        Load           "bitmap" # bitmap-fonts
        Load           "type1"
        Load           "freetype"
        Load           "record"
    EndSection
    Section "ServerFlags"
        Option         "AllowMouseOpenFail" "true"
        Option         "Xinerama" "0"
    EndSection
    Section "InputDevice"
        Identifier     "Keyboard0"
        Driver         "keyboard"
        Option         "CoreKeyboard"
        Option         "XkbRules" "xorg"
        Option         "XkbModel" "pc105"
        Option         "XkbLayout" "us"
        Option         "XkbVariant" "nodeadkeys"
    EndSection
    Section "InputDevice"
        Identifier     "Serial Mouse"
        Driver         "mouse"
        Option         "Protocol" "Microsoft"
        Option         "Device" "/dev/ttyS0"
        Option         "Emulate3Buttons" "true"
        Option         "Emulate3Timeout" "70"
        Option         "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
        Identifier     "PS/2 Mouse"
        Driver         "mouse"
        Option         "Protocol" "auto"
        Option         "ZAxisMapping" "4 5"
        Option         "Device" "/dev/psaux"
        Option         "Emulate3Buttons" "true"
        Option         "Emulate3Timeout" "70"
        Option         "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
        Identifier     "USB Mouse"
        Driver         "mouse"
        Option         "Device" "/dev/input/mice"
        Option         "SendCoreEvents" "true"
        Option         "Protocol" "IMPS/2"
        Option         "ZAxisMapping" "4 5"
        Option         "Buttons" "5"
    EndSection
    Section "Device"
        Identifier     "Videocard0"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
        BoardName      "GeForce 6800 GT"
        BusID          "PCI:1:0:0"
        Screen          0
        Option         "RenderAccel"     "True"
        Option         "UseEDID"         "False"
        Option         "ConnectedMonitor"     "DFP-0"
        Option         "ModeValidation" "NoVertRefreshCheck"
        Option         "ModeValidation" "NoDFPNativeResolutionCheck"
        Option         "ModeValidation" "NoEdidMaxPclkCheck"
        Option         "ModeValidation" "NoHorizSyncCheck"
        Option         "ModeValidation" "NoMaxPClkcheck"
        Option         "ModeValidation" "AllowNon60HzDFPModes"
    #    Option         "ExactModeTimingsDVI" "FALSE"
        Option         "NoDDC"
        Option         "NoPredefinedModes"
        Option         "DPI" "100x100"
    EndSection
    Section "Monitor"
        Identifier     "TV"
        VendorName     "Unknown"
        ModelName      "SONY TV"
        HorizSync      15.0 - 46.0
        VertRefresh    59.0 - 61.0
        Option         "DPMS"
        ModeLine       "hd1080i" 74.2 1920 2008 2052 2200 1080 1088 1091 1121 +hsync +vsync interlace
        Modeline "hd720p" 74.5 1280 1320 1392 1600 720 722 724 758
    EndSection
    Section "Screen"
        Identifier     "Screen0"
        Device         "Videocard0"
        Monitor        "TV"
        DefaultDepth    24
        Option         "UseDisplayDevice" "DFP-0"
        SubSection     "Display"
          Depth           24
          Modes           "320x240"
        EndSubSection
    EndSection
    Section "ServerLayout"
        Identifier     "Xorg Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "PS/2 Mouse" "CorePointer"
    EndSection
    ########### EO XORG.CONF

    All,
    I am running arch on a custom machine with a geforce 6800GT agp dual dvi outs
    i have my lcd connected to dv1 and my dvi->hdmi to dvi2..
    The modes for my xorg.conf are not validating and the tv is black except for
    the mouse when i scroll over to the right side of my screen..
    I think my modelines are jacked or a bug is in the nvidia driver...
    ########### XORG.CONF
    Section "Files"
        RgbPath         "/usr/share/X11/rgb"
        ModulePath      "/usr/lib/xorg/modules"
        FontPath        "/usr/share/fonts/misc:unscaled"
        FontPath        "/usr/share/fonts/misc"
        FontPath        "/usr/share/fonts/75dpi:unscaled"
        FontPath        "/usr/share/fonts/75dpi"
        FontPath        "/usr/share/fonts/100dpi:unscaled"
        FontPath        "/usr/share/fonts/100dpi"
        FontPath        "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
        Load           "ddc"  # ddc probing of monitor
        Load           "dbe"
        Load           "extmod"
        Load           "glx"
        Load           "bitmap" # bitmap-fonts
        Load           "type1"
        Load           "freetype"
        Load           "record"
    EndSection
    Section "ServerFlags"
        Option         "AllowMouseOpenFail" "true"
        Option         "Xinerama" "0"
    EndSection
    Section "InputDevice"
        Identifier     "Keyboard0"
        Driver         "keyboard"
        Option         "CoreKeyboard"
        Option         "XkbRules" "xorg"
        Option         "XkbModel" "pc105"
        Option         "XkbLayout" "us"
        Option         "XkbVariant" "nodeadkeys"
    EndSection
    Section "InputDevice"
        Identifier     "Serial Mouse"
        Driver         "mouse"
        Option         "Protocol" "Microsoft"
        Option         "Device" "/dev/ttyS0"
        Option         "Emulate3Buttons" "true"
        Option         "Emulate3Timeout" "70"
        Option         "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
        Identifier     "PS/2 Mouse"
        Driver         "mouse"
        Option         "Protocol" "auto"
        Option         "ZAxisMapping" "4 5"
        Option         "Device" "/dev/psaux"
        Option         "Emulate3Buttons" "true"
        Option         "Emulate3Timeout" "70"
        Option         "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
        Identifier     "USB Mouse"
        Driver         "mouse"
        Option         "Device" "/dev/input/mice"
        Option         "SendCoreEvents" "true"
        Option         "Protocol" "IMPS/2"
        Option         "ZAxisMapping" "4 5"
        Option         "Buttons" "5"
    EndSection
    Section "Device"
        Identifier     "Videocard0"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
        BoardName      "GeForce 6800 GT"
        BusID          "PCI:1:0:0"
        Screen          0
        Option         "RenderAccel"     "True"
        Option         "UseEDID"         "False"
        Option         "ConnectedMonitor"     "DFP-0"
        Option         "ModeValidation" "NoVertRefreshCheck"
        Option         "ModeValidation" "NoDFPNativeResolutionCheck"
        Option         "ModeValidation" "NoEdidMaxPclkCheck"
        Option         "ModeValidation" "NoHorizSyncCheck"
        Option         "ModeValidation" "NoMaxPClkcheck"
        Option         "ModeValidation" "AllowNon60HzDFPModes"
    #    Option         "ExactModeTimingsDVI" "FALSE"
        Option         "NoDDC"
        Option         "NoPredefinedModes"
        Option         "DPI" "100x100"
    EndSection
    Section "Monitor"
        Identifier     "TV"
        VendorName     "Unknown"
        ModelName      "SONY TV"
        HorizSync      15.0 - 46.0
        VertRefresh    59.0 - 61.0
        Option         "DPMS"
        ModeLine       "hd1080i" 74.2 1920 2008 2052 2200 1080 1088 1091 1121 +hsync +vsync interlace
        Modeline "hd720p" 74.5 1280 1320 1392 1600 720 722 724 758
    EndSection
    Section "Screen"
        Identifier     "Screen0"
        Device         "Videocard0"
        Monitor        "TV"
        DefaultDepth    24
        Option         "UseDisplayDevice" "DFP-0"
        SubSection     "Display"
          Depth           24
          Modes           "320x240"
        EndSubSection
    EndSection
    Section "ServerLayout"
        Identifier     "Xorg Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "PS/2 Mouse" "CorePointer"
    EndSection
    ########### EO XORG.CONF

  • [SOLVED] xorg.conf with 'hwd -xa' on sony viao not working

    Hello,
    I have a Sony viao VGN-T150P running Arch linux and I can't get my x.org working .
    here are some of information I get:
    lspci says
    00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
    00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
    00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
    00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
    00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
    00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
    00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
    00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
    00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
    02:04.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
    02:04.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller
    02:04.3 Mass storage controller: Texas Instruments PCI7420/7620 Combo CardBus, 1394a-2000 OHCI and SD/MS-Pro Controller
    02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 83)
    02:0b.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
    so then I installed xf86-video-intel,
    using that driver with a blank xorg.conf , I get 3 terminal windows and xclock,  but my mouse and keyboard don't seem to do anything
    here are those errors:
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux myhost 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
    Build Date: 17 December 2008 08:20:05PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 4 23:44:09 2009
    (EE) Unable to locate/open config file
    (II) Loader magic: 0x81d5fe0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/0, 0xe0000000/0, I/O @ 0x00001800/0
    (--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/0, 0xe0080000/0
    (==) Matched intel for the autoconfigured driver
    New driver is "intel"
    (==) Using default built-in configuration (30 lines)
    (==) --- Start of built-in configuration ---
    Section "Device"
    Identifier "Builtin Default intel Device 0"
    Driver "intel"
    EndSection
    Section "Screen"
    Identifier "Builtin Default intel Screen 0"
    Device "Builtin Default intel Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default fbdev Device 0"
    Driver "fbdev"
    EndSection
    Section "Screen"
    Identifier "Builtin Default fbdev Screen 0"
    Device "Builtin Default fbdev Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default vesa Device 0"
    Driver "vesa"
    EndSection
    Section "Screen"
    Identifier "Builtin Default vesa Screen 0"
    Device "Builtin Default vesa Device 0"
    EndSection
    Section "ServerLayout"
    Identifier "Builtin Default Layout"
    Screen "Builtin Default intel Screen 0"
    Screen "Builtin Default fbdev Screen 0"
    Screen "Builtin Default vesa Screen 0"
    EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default intel Screen 0" (0)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default intel Device 0"
    (==) No monitor specified for screen "Builtin Default intel Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default fbdev Screen 0" (1)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default fbdev Device 0"
    (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default vesa Screen 0" (2)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default vesa Device 0"
    (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) No FontPath specified. Using compiled-in default.
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 2.4.3
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 4.1
    (II) LoadModule: "fbdev"
    (WW) Warning, couldn't open module fbdev
    (II) UnloadModule: "fbdev"
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (II) LoadModule: "vesa"
    (II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
    (II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 4.1
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43
    (II) VESA: driver for VESA chipsets: vesa
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (WW) Falling back to old probe method for vesa
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.1.0
    ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 4.1
    (II) intel(0): Creating default Display subsection in Screen section
    "Builtin Default intel Screen 0" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 855GME
    (--) intel(0): Chipset: "852GM/855GM"
    (--) intel(0): Linear framebuffer at 0xE8000000
    (--) intel(0): IO registers at addr 0xE0000000
    (II) intel(0): 2 display pipes available.
    (==) intel(0): Using EXA for acceleration
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (WW) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 8000 kB
    (II) intel(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA has no monitor section
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
    (II) intel(0): I2C bus "DVODDC_D" initialized.
    (II) Loading sub module "sil164"
    (II) LoadModule: "sil164"
    (II) Loading /usr/lib/xorg/modules/drivers//sil164.so
    (II) Module sil164: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) intel(0): I2C bus "DVOI2C_E" initialized.
    (II) Loading sub module "ch7xxx"
    (II) LoadModule: "ch7xxx"
    (II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
    (II) Module ch7xxx: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) intel(0): I2C bus "DVOI2C_E" removed.
    (II) intel(0): I2C bus "DVOI2C_E" initialized.
    (II) Loading sub module "ivch"
    (II) LoadModule: "ivch"
    (II) Loading /usr/lib/xorg/modules/drivers//ivch.so
    (II) Module ivch: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) intel(0): I2C bus "DVOI2C_E" removed.
    (II) intel(0): I2C bus "DVOI2C_B" initialized.
    (II) Loading sub module "tfp410"
    (II) LoadModule: "tfp410"
    (II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
    (II) Module tfp410: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) intel(0): I2C bus "DVOI2C_B" removed.
    (II) intel(0): I2C bus "DVOI2C_E" initialized.
    (II) Loading sub module "ch7017"
    (II) LoadModule: "ch7017"
    (II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
    (II) Module ch7017: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) intel(0): I2C bus "DVOI2C_E" removed.
    (II) intel(0): I2C bus "DVOI2C_E" initialized.
    (II) intel(0): I2C bus "DVOI2C_E" removed.
    (II) intel(0): I2C bus "DVODDC_D" removed.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1280x768
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 128 kB GTT.
    (II) intel(0): detected 8060 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 2.4.0
    ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
    (WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
    (WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
    (II) UnloadModule: "vesa"
    (II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 238592 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 954364 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 131072 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
    (Cannot allocate memory)
    (WW) intel(0): Allocation error, framebuffer compression disabled
    (WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
    (Cannot allocate memory)
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xe0000000
    (II) intel(0): [drm] ring buffer = 0xe8000000
    (II) intel(0): [drm] mapped front buffer at 0xe9000000, handle = 0xe9000000
    (II) intel(0): [drm] mapped back buffer at 0xec000000, handle = 0xec000000
    (II) intel(0): [drm] mapped depth buffer at 0xed000000, handle = 0xed000000
    (II) intel(0): [drm] mapped classic textures at 0xee000000, handle = 0xee000000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) EXA(0): Offscreen pixmap area of 31457280 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x01000000 (pgoffset 4096)
    (II) intel(0): xf86BindGARTMemory: bind key 6 at 0x02000000 (pgoffset 8192)
    (II) intel(0): xf86BindGARTMemory: bind key 7 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86BindGARTMemory: bind key 8 at 0x05000000 (pgoffset 20480)
    (II) intel(0): xf86BindGARTMemory: bind key 9 at 0x06000000 (pgoffset 24576)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00027fff: logical 3D context (32 kB)
    (II) intel(0): 0x007df000: end of stolen memory
    (II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x0000000036307000 physical
    (II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x00000000362c8000 physical
    (II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x000000003632f000 physical
    (II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x00000000362a8000 physical
    (II) intel(0): 0x007e9000-0x007e9fff: overlay registers (4 kB, 0x0000000036322000 physical
    (II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
    (II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
    (II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
    (II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
    (II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
    (II) intel(0): 0x08000000: end of aperture
    (II) intel(0): using SSC reference clock of 66 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now enabled and connected to pipe A.
    (WW) intel(0): Hardware claims pipe A is on while software believes it is off
    (WW) intel(0): Hardware claims plane A is on while software believes it is off
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): [drm] dma control initialized, using IRQ 9
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Enabled
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 338 x 203
    if I use hwd -xa to make an xorg.conf which says this:
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "PS/2 Mouse" "CorePointer"
    # Serial Mouse not detected
    # USB Mouse not detected
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "AutoAddDevices" "False"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    # Load "synaptics"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    # 640x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    # 720x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    # 640x480 @ 72Hz (VESA) hsync: 37.9kHz
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    # 640x480 @ 75Hz (VESA) hsync: 37.5kHz
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    # 640x480 @ 85Hz (VESA) hsync: 43.3kHz
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    # 800x600 @ 56Hz (VESA) hsync: 35.2kHz
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    # 800x600 @ 72Hz (VESA) hsync: 48.1kHz
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    # 800x600 @ 75Hz (VESA) hsync: 46.9kHz
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    # 800x600 @ 85Hz (VESA) hsync: 53.7kHz
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
    # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    # Additional modelines
    ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    # Extended modelines with GTF timings
    # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
    # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
    # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
    # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
    # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
    # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
    # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
    # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
    ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
    # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
    ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
    # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
    ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
    # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
    ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
    # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
    # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
    ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
    # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
    ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
    # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
    ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
    # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
    ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
    # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
    ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
    # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
    ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
    # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
    ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
    # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
    ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Device"
    Identifier "Card0"
    Driver "i810"
    VendorName "All"
    BoardName "All"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 16
    SubSection "Display"
    Depth 1
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    and do startx it spits out a bunch of errors:
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux myhost 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
    Build Date: 17 December 2008 08:20:05PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 5 15:57:56 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "PS/2 Mouse"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81d5fe0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/0, 0xe0000000/0, I/O @ 0x00001800/0
    (--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/0, 0xe0080000/0
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "type1"
    (WW) Warning, couldn't open module type1
    (II) UnloadModule: "type1"
    (EE) Failed to load module "type1" (module does not exist, 0)
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "record"
    (WW) Warning, couldn't open module record
    (II) UnloadModule: "record"
    (EE) Failed to load module "record" (module does not exist, 0)
    (II) LoadModule: "i810"
    (II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
    (II) Module i810: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 2.4.3
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 4.1
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43
    (II) Primary Device is: PCI 00@00:02:0
    (EE) No devices detected.
    Fatal server error:
    no screens found
    Does anybody else a a VGN-T150P or any of these problems? I'm not very good a writing/decoding xorg.conf files so if anybody could help it would be greatly appreciated
    Last edited by jsh33 (2009-02-08 14:52:01)

    I download xf86-video-fbdev just for fun before I saw your post, I didn't do anything as far as I could see.
    I commented these lines out:
    FontPath "/usr/share/fonts/Type1"
    Load "record"
    Load "type1"
    B, I didn't install any fonts but now I installed a buch of random fonts:
    pacman -S ttf-ms-fonts ttf-cheapskate artwiz-fonts xorg-fonts-75dpi xorg-fonts-100dpi
    and did some of what the X.org configuration wiki said:
    fc-cache -fv
    /usr/bin/fc-cache
    /usr/bin/mkfontscale
    /usr/bin/mkfontdir
    ln -s /usr/share/fonts/encodings/encodings.dir encodings.dir
    Then this I changed this:
    Section "Device"
    Identifier "Card0"
    Driver "intel"
    VendorName "All"
    BoardName "All"
    EndSection
    EDIT, halfway through this post I realized I type in biagio's code wrong, I re-typed it and now my X works!
    Thanks Everybody for the help! , here's the working xorg.conf for reference:
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "PS/2 Mouse" "CorePointer"
    # Serial Mouse not detected
    # USB Mouse not detected
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "AutoAddDevices" "False"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    # FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    # Load "type1"
    Load "freetype"
    # Load "record"
    # Load "synaptics"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    # 640x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    # 720x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    # 640x480 @ 72Hz (VESA) hsync: 37.9kHz
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    # 640x480 @ 75Hz (VESA) hsync: 37.5kHz
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    # 640x480 @ 85Hz (VESA) hsync: 43.3kHz
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    # 800x600 @ 56Hz (VESA) hsync: 35.2kHz
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    # 800x600 @ 72Hz (VESA) hsync: 48.1kHz
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    # 800x600 @ 75Hz (VESA) hsync: 46.9kHz
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    # 800x600 @ 85Hz (VESA) hsync: 53.7kHz
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
    # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    # Additional modelines
    ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    # Extended modelines with GTF timings
    # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
    # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
    # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
    # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
    # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
    # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
    # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
    # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
    ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
    # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
    ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
    # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
    ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
    # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
    ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
    # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
    # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
    ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
    # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
    ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
    # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
    ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
    # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
    ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
    # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
    ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
    # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
    ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
    # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
    ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
    # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
    ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Device"
    Identifier "Card0"
    Driver "intel"
    VendorName "All"
    BoardName "All"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 16
    SubSection "Display"
    Depth 1
    Modes "1280x768" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection

  • [SOLVED]where I can specify where are my font if not using xorg.conf

    where I can specify where are my font if not using xorg.conf
    thanks
    Last edited by jccl1706 (2010-04-01 18:06:45)

    You can try to this in ~/.xinitrc :
    xset +fp /usr/share/fonts/local
    or any other path.

  • [solved] aticonfig fails to create a working xorg.conf file (fglrx)

    I have problems setting up fglrx for my ATI Mobility 200:
    01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE)
    I followed the instructions in the Wiki but when I run
    aticonfig --initial
    and restart X gives me a "no screens" error and drops back to command line. I should mention that I have X running without problems with the vesa driver.
    I have tried to change my driver manually in xorg.conf to fgrlx and have loaded the module in rc.conf according to other forum posts.
    Last edited by lenni (2007-09-23 23:07:36)

    here my xorg log file
    X.Org X Server 1.4.0
    Release Date: 5 September 2007
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.22-ARCH i686
    Current Operating System: Linux myhost 2.6.22-ARCH #1 SMP PREEMPT Thu Sep 20 19:43:47 CEST 2007 i686
    Build Date: 22 September 2007 07:03:22PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 23 21:25:42 2007
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Default Layout"
    (**) |-->Screen "Default Screen" (0)
    (**) | |-->Monitor "Generic Monitor"
    (**) | |-->Device "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
    (**) |-->Input Device "Generic Keyboard"
    (**) |-->Input Device "Configured Mouse"
    (**) |-->Input Device "stylus"
    (**) |-->Input Device "cursor"
    (**) |-->Input Device "eraser"
    (**) |-->Input Device "Synaptics Touchpad"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
    Entry deleted from font path.
    (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
    Entry deleted from font path.
    (WW) FontPath is completely invalid. Using compiled-in default.
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) RgbPath set to "/usr/share/X11/rgb"
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is disabled
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x81d4540
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (++) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1002,5950 card 103c,3091 rev 01 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 1002,5a3f card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:13:0: chip 1002,4374 card 103c,3091 rev 00 class 0c,03,10 hdr 80
    (II) PCI: 00:13:1: chip 1002,4375 card 103c,3091 rev 00 class 0c,03,10 hdr 00
    (II) PCI: 00:13:2: chip 1002,4373 card 103c,3091 rev 00 class 0c,03,20 hdr 00
    (II) PCI: 00:14:0: chip 1002,4372 card 103c,3091 rev 11 class 0c,05,00 hdr 80
    (II) PCI: 00:14:1: chip 1002,4376 card 103c,3091 rev 00 class 01,01,8a hdr 00
    (II) PCI: 00:14:3: chip 1002,4377 card 103c,3091 rev 00 class 06,01,00 hdr 80
    (II) PCI: 00:14:4: chip 1002,4371 card 0000,0000 rev 00 class 06,04,01 hdr 81
    (II) PCI: 00:14:5: chip 1002,4370 card 103c,3091 rev 02 class 04,01,00 hdr 80
    (II) PCI: 00:14:6: chip 1002,4378 card 103c,3091 rev 02 class 07,03,00 hdr 80
    (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 01:05:0: chip 1002,5955 card 103c,3091 rev 00 class 03,00,00 hdr 00
    (II) PCI: 05:00:0: chip 10ec,8139 card 103c,3091 rev 10 class 02,00,00 hdr 00
    (II) PCI: 05:02:0: chip 14e4,4320 card 103c,12fa rev 03 class 02,80,00 hdr 00
    (II) PCI: 05:09:0: chip 104c,8031 card a400,0000 rev 00 class 06,07,00 hdr 82
    (II) PCI: 05:09:2: chip 104c,8032 card 103c,3091 rev 00 class 0c,00,10 hdr 80
    (II) PCI: 05:09:3: chip 104c,8033 card 103c,3091 rev 00 class 01,80,00 hdr 80
    (II) PCI: 05:09:4: chip 104c,8034 card 103c,3091 rev 00 class 08,05,00 hdr 80
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
    (II) Bus 1 I/O range:
    [0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
    [1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
    [2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
    [3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xc0100000 - 0xc01fffff (0x100000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 5: bridge is at (0:20:4), (0,5,9), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 5 I/O range:
    [0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
    (II) Bus 5 non-prefetchable memory range:
    [0] -1 0 0xc0200000 - 0xc02fffff (0x100000) MX[b]
    (II) Bus 5 prefetchable memory range:
    [0] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[b]
    (II) PCI-to-CardBus bridge:
    (II) Bus 6: bridge is at (5:9:0), (5,6,9), BCTRL: 0x05c0 (VGA_EN is cleared)
    (II) Bus 6 I/O range:
    [0] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
    [1] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
    (II) Bus 6 prefetchable memory range:
    [0] -1 0 0x40000000 - 0x43ffffff (0x4000000) MX[b]
    (--) PCI:*(1:5:0) ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE) rev 0, Mem @ 0xc8000000/27, 0xc0100000/16, I/O @ 0x9000/8
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) Active PCI resource ranges:
    [0] -1 0 0xc0208400 - 0xc02084ff (0x100) MX[b]
    [1] -1 0 0xc020a000 - 0xc020a0ff (0x100) MX[b]
    [2] -1 0 0xc020a400 - 0xc020a4ff (0x100) MX[b]
    [3] -1 0 0xc0206000 - 0xc0207fff (0x2000) MX[b]
    [4] -1 0 0xc0200000 - 0xc0203fff (0x4000) MX[b]
    [5] -1 0 0xc0208800 - 0xc0208fff (0x800) MX[b]
    [6] -1 0 0xc0204000 - 0xc0205fff (0x2000) MX[b]
    [7] -1 0 0xc0208000 - 0xc02080ff (0x100) MX[b]
    [8] -1 0 0xc0003800 - 0xc00038ff (0x100) MX[b]
    [9] -1 0 0xc0003400 - 0xc00034ff (0x100) MX[b]
    [10] -1 0 0xc0003000 - 0xc00033ff (0x400) MX[b]
    [11] -1 0 0xc0002000 - 0xc0002fff (0x1000) MX[b]
    [12] -1 0 0xc0001000 - 0xc0001fff (0x1000) MX[b]
    [13] -1 0 0xc0000000 - 0xc0000fff (0x1000) MX[b]
    [14] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[b](B)
    [15] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
    [16] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [17] -1 0 0x00008410 - 0x0000841f (0x10) IX[b]
    [18] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [19] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [20] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [22] -1 0 0x00008400 - 0x0000840f (0x10) IX[b]
    [23] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xc0208400 - 0xc02084ff (0x100) MX[b]
    [1] -1 0 0xc020a000 - 0xc020a0ff (0x100) MX[b]
    [2] -1 0 0xc020a400 - 0xc020a4ff (0x100) MX[b]
    [3] -1 0 0xc0206000 - 0xc0207fff (0x2000) MX[b]
    [4] -1 0 0xc0200000 - 0xc0203fff (0x4000) MX[b]
    [5] -1 0 0xc0208800 - 0xc0208fff (0x800) MX[b]
    [6] -1 0 0xc0204000 - 0xc0205fff (0x2000) MX[b]
    [7] -1 0 0xc0208000 - 0xc02080ff (0x100) MX[b]
    [8] -1 0 0xc0003800 - 0xc00038ff (0x100) MX[b]
    [9] -1 0 0xc0003400 - 0xc00034ff (0x100) MX[b]
    [10] -1 0 0xc0003000 - 0xc00033ff (0x400) MX[b]
    [11] -1 0 0xc0002000 - 0xc0002fff (0x1000) MX[b]
    [12] -1 0 0xc0001000 - 0xc0001fff (0x1000) MX[b]
    [13] -1 0 0xc0000000 - 0xc0000fff (0x1000) MX[b]
    [14] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[b](B)
    [15] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
    [16] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [17] -1 0 0x00008410 - 0x0000841f (0x10) IX[b]
    [18] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [19] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [20] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [22] -1 0 0x00008400 - 0x0000840f (0x10) IX[b]
    [23] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xc0208400 - 0xc02084ff (0x100) MX[b]
    [5] -1 0 0xc020a000 - 0xc020a0ff (0x100) MX[b]
    [6] -1 0 0xc020a400 - 0xc020a4ff (0x100) MX[b]
    [7] -1 0 0xc0206000 - 0xc0207fff (0x2000) MX[b]
    [8] -1 0 0xc0200000 - 0xc0203fff (0x4000) MX[b]
    [9] -1 0 0xc0208800 - 0xc0208fff (0x800) MX[b]
    [10] -1 0 0xc0204000 - 0xc0205fff (0x2000) MX[b]
    [11] -1 0 0xc0208000 - 0xc02080ff (0x100) MX[b]
    [12] -1 0 0xc0003800 - 0xc00038ff (0x100) MX[b]
    [13] -1 0 0xc0003400 - 0xc00034ff (0x100) MX[b]
    [14] -1 0 0xc0003000 - 0xc00033ff (0x400) MX[b]
    [15] -1 0 0xc0002000 - 0xc0002fff (0x1000) MX[b]
    [16] -1 0 0xc0001000 - 0xc0001fff (0x1000) MX[b]
    [17] -1 0 0xc0000000 - 0xc0000fff (0x1000) MX[b]
    [18] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[b](B)
    [19] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [22] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [23] -1 0 0x00008410 - 0x0000841f (0x10) IX[b]
    [24] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [25] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [26] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [28] -1 0 0x00008400 - 0x0000840f (0x10) IX[b]
    [29] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded by default.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "type1" will be loaded by default.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "i2c"(II) Module "i2c" already built-in
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.0, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 2.0
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "type1"
    (II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
    (II) Module type1: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font Type1
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.1.0, module version = 8.40.4
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 1.0
    (EE) module ABI major version (1) doesn't match the server's version (2)
    (II) UnloadModule: "fglrx"
    (II) Unloading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (EE) Failed to load module "fglrx" (module requirement mismatch, 0)
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.1.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "wacom"
    (WW) Warning, couldn't open module wacom
    (II) UnloadModule: "wacom"
    (EE) Failed to load module "wacom" (module does not exist, 0)
    (II) LoadModule: "synaptics"
    (WW) Warning, couldn't open module synaptics
    (II) UnloadModule: "synaptics"
    (EE) Failed to load module "synaptics" (module does not exist, 0)
    (EE) No drivers available.
    Fatal server error:
    no screens found
    Last edited by lenni (2007-09-23 22:29:30)

  • [SOLVED]Xorg.conf, mouse config problem

    The Rapoo M765 mouse can not work properly under normal mouse configuration.
    The mouse goes beyond controll when config as below:
    hacksign@XSign [14:13:13] : ~
    >> cat /etc/X11/xorg.conf.d/50-mouse-acceleration.conf
    #Section "InputClass"
    # Identifier "Mouse2"
    # MatchProduct "RAPOO RAPOO 2.4G Remote Mouse"
    # MatchIsPointer "yes"
    # MatchDevicePath "/dev/input/event*"
    # Driver "mouse"
    # Option "Protocol" "auto"
    # Option "Emulate3Buttons" "no"
    # Option "Buttons" "7"
    # Option "ButtonMapping" "1 2 3 6 7"
    #EndSection
    When there is no any configuration, the mouse can work abnormally. Movement and right/left click work fine, but I can not use scroll wheel,and the "go forward"&"go backward" mouse key can not work too.
    (I know Option "ZAxisMapping" "4 5" is the configuration of scroll wheel emulation.)
    The real problem is 'mouse beyond controll',the cursor goes crazyly on screen ....
    I guess it is something wrong of ButtonMapping option. But when I tried to get button number from command xev,when scroll wheel scrolles, I get something below(the scroll wheel movement is identified as a key event~):
    //left click
    ButtonPress event, serial 34, synthetic NO, window 0x4a00001,
    root 0x264, subw 0x0, time 3766452, (135,143), root:(2287,595),
    state 0x0, button 1, same_screen YES
    ButtonRelease event, serial 34, synthetic NO, window 0x4a00001,
    root 0x264, subw 0x0, time 3766588, (135,143), root:(2287,595),
    state 0x100, button 1, same_screen YES
    //right click
    ButtonPress event, serial 34, synthetic NO, window 0x4a00001,
    root 0x264, subw 0x0, time 3767716, (135,143), root:(2287,595),
    state 0x0, button 3, same_screen YES
    ButtonRelease event, serial 34, synthetic NO, window 0x4a00001,
    root 0x264, subw 0x0, time 3767852, (135,143), root:(2287,595),
    state 0x400, button 3, same_screen YES
    //mouse scroll, identified as keyboard event(?)
    KeyRelease event, serial 34, synthetic NO, window 0x4a00001,
    root 0x264, subw 0x0, time 3769332, (135,143), root:(2287,595),
    state 0x0, keycode 123 (keysym 0x1008ff13, XF86AudioRaiseVolume), same_screen YES,
    XLookupString gives 0 bytes:
    XFilterEvent returns: False
    KeyPress event, serial 34, synthetic NO, window 0x4a00001,
    root 0x264, subw 0x0, time 3769332, (135,143), root:(2287,595),
    state 0x0, keycode 122 (keysym 0x1008ff11, XF86AudioLowerVolume), same_screen YES,
    XLookupString gives 0 bytes:
    XmbLookupString gives 0 bytes:
    XFilterEvent returns: False
    here is some Information(I dont know why the mouse is identified as 'type:KEYBOARD'):
    hacksign@XSign [14:55:03] : ~
    >> xinput
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ RAPOO RAPOO 2.4G Remote Mouse id=13 [slave pointer (2)]
    ⎜ ↳ SynPS/2 Synaptics TouchPad id=15 [slave pointer (2)]
    ⎜ ↳ TPPS/2 IBM TrackPoint id=16 [slave pointer (2)]
    ⎣ Virtual core keyboard id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
    ↳ Power Button id=6 [slave keyboard (3)]
    ↳ Video Bus id=7 [slave keyboard (3)]
    ↳ Sleep Button id=8 [slave keyboard (3)]
    ↳ Heng Yu Technology Poker Pro S id=9 [slave keyboard (3)]
    ↳ Heng Yu Technology Poker Pro S id=10 [slave keyboard (3)]
    ↳ Integrated Camera id=11 [slave keyboard (3)]
    ↳ RAPOO RAPOO 2.4G Remote Mouse id=12 [slave keyboard (3)]
    ↳ AT Translated Set 2 keyboard id=14 [slave keyboard (3)]
    ↳ ThinkPad Extra Buttons id=17 [slave keyboard (3)]
    hacksign@XSign [14:55:06] : ~
    >> xinput list-props 13
    Device 'RAPOO RAPOO 2.4G Remote Mouse':
    Device Enabled (142): 1
    Coordinate Transformation Matrix (144): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
    Device Accel Profile (270): 0
    Device Accel Constant Deceleration (271): 1.000000
    Device Accel Adaptive Deceleration (272): 1.000000
    Device Accel Velocity Scaling (273): 10.000000
    Device Product ID (260): 9390, 8192
    Device Node (261): "/dev/input/event8"
    Evdev Axis Inversion (274): 0, 0
    Evdev Axes Swap (276): 0
    Axis Labels (277): "Rel X" (152), "Rel Y" (153), "Rel Horiz Wheel" (267), "Rel Dial" (268), "Rel Vert Wheel" (269)
    Button Labels (278): "Button Left" (145), "Button Middle" (146), "Button Right" (147), "Button Wheel Up" (148), "Button Wheel Down" (149), "Button Horiz Wheel Left" (150), "Button Horiz Wheel Right" (151), "Button Side" (265), "Button Extra" (266), "Button Unknown" (263), "Button Unknown" (263), "Button Unknown" (263), "Button Unknown" (263)
    Evdev Scrolling Distance (279): 1, 1, 1
    Evdev Middle Button Emulation (280): 0
    Evdev Middle Button Timeout (281): 50
    Evdev Third Button Emulation (282): 0
    Evdev Third Button Emulation Timeout (283): 1000
    Evdev Third Button Emulation Button (284): 3
    Evdev Third Button Emulation Threshold (285): 20
    Evdev Wheel Emulation (286): 0
    Evdev Wheel Emulation Axes (287): 0, 0, 4, 5
    Evdev Wheel Emulation Inertia (288): 10
    Evdev Wheel Emulation Timeout (289): 200
    Evdev Wheel Emulation Button (290): 4
    Evdev Drag Lock Buttons (291): 0
    hacksign@XSign [14:55:14] : ~
    >> grep -i rapoo /var/log/Xorg.0.log
    [ 29.102] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/event7)
    [ 29.102] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
    [ 29.102] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
    [ 29.102] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
    [ 29.102] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event7"
    [ 29.102] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
    [ 29.102] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
    [ 29.102] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
    [ 29.102] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 12)
    [ 29.103] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/event8)
    [ 29.103] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev pointer catchall"
    [ 29.103] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
    [ 29.103] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
    [ 29.103] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
    [ 29.103] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event8"
    [ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
    [ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found 9 mouse buttons
    [ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found scroll wheel(s)
    [ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found relative axes
    [ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found x and y relative axes
    [ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found absolute axes
    [ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Forcing absolute x/y axes to exist.
    [ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
    [ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as mouse
    [ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
    [ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Adding scrollwheel support
    [ 29.103] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: YAxisMapping: buttons 4 and 5
    [ 29.103] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 29.103] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 13)
    [ 29.104] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: initialized for relative axes.
    [ 29.104] (WW) evdev: RAPOO RAPOO 2.4G Remote Mouse: ignoring absolute axes.
    [ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) keeping acceleration scheme 1
    [ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration profile 0
    [ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration factor: 2.000
    [ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration threshold: 4
    [ 29.104] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/mouse0)
    hacksign@XSign [14:59:47] : ~
    >> yaourt -Q|grep -i 'input-'
    local/xf86-input-evdev-trackpoint 2.9.1-1
    extra/xf86-input-keyboard 1.8.0-3 (xorg-drivers xorg)
    extra/xf86-input-mouse 1.9.1-1 (xorg-drivers xorg)
    extra/xf86-input-synaptics 1.8.1-1 (xorg-drivers xorg)
    Last edited by Hacksign (2015-01-14 02:22:51)

    Thanks for reply !
    change Driver 'mouse' to Driver 'evdev',solved cursor goes beyond controll problem.
    but I still can not use scroll button and 'go forward'&'go backward' button.
    (BTW:evdev_drv.so is from local/xf86-input-evdev-trackpoint, and local/xf86-input-evdev-trackpoint package is from AUR)
    I think, maybe something wrong with my button number mapping, but I still can not get scroll button number with 'xev' command....
    below is my configuration:
    hacksign@XSign [17:15:19] : /var/log
    >> cat /etc/X11/xorg.conf.d/50-mouse-acceleration.conf
    Section "InputClass"
    Identifier "Mouse2"
    MatchProduct "RAPOO RAPOO 2.4G Remote Mouse"
    MatchIsPointer "yes"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    Option "Protocol" "auto"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "9"
    Option "ButtonMapping" "1 2 3 6 7 8 9 4 5"
    EndSection
    and here is Xorg.0.log
    [ 11357.287] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
    [ 11357.287] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
    [ 11357.287] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
    [ 11357.287] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event7"
    [ 11357.287] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
    [ 11357.287] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
    [ 11357.287] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
    [ 11357.287] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:24AE:2000.0003/input/input8/event7"
    [ 11357.288] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 12)
    [ 11357.288] (**) Option "xkb_rules" "evdev"
    [ 11357.288] (**) Option "xkb_model" "pc104"
    [ 11357.288] (**) Option "xkb_layout" "us"
    [ 11357.288] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/event8)
    [ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev pointer catchall"
    [ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
    [ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "Mouse2"
    [ 11357.288] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
    [ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
    [ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event8"
    [ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: ButtonMapping '1 2 3 6 7 8 9 4 5'
    [ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
    [ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found 9 mouse buttons
    [ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found scroll wheel(s)
    [ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found relative axes
    [ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found x and y relative axes
    [ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found absolute axes
    [ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Forcing absolute x/y axes to exist.
    [ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
    [ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as mouse
    [ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
    [ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Adding scrollwheel support
    [ 11357.288] (**) Option "Emulate3Buttons" "no"
    [ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: YAxisMapping: buttons 4 and 5
    [ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 11357.288] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:24AE:2000.0004/input/input9/event8"
    [ 11357.288] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 13)
    [ 11357.288] (**) Option "xkb_rules" "evdev"
    [ 11357.288] (**) Option "xkb_model" "pc104"
    [ 11357.288] (**) Option "xkb_layout" "us"
    [ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: initialized for relative axes.
    [ 11357.288] (WW) evdev: RAPOO RAPOO 2.4G Remote Mouse: ignoring absolute axes.
    [ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) keeping acceleration scheme 1
    [ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration profile 0
    [ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration factor: 2.000
    [ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration threshold: 4
    [ 11357.289] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/mouse0)
    [ 11357.289] (II) No input driver specified, ignoring this device.
    [ 11357.289] (II) This device may have been added with another device file.
    olive wrote:In the config file you mentioned, all is commented; do you mean that you have problems when you have uncommented it? You should not use the mouse driver (old deprecated driver) but evdev. Try to remove xf86-input-mouse and xf86-input-keyboard (same as before, this is deprecated and handled by evdev) and remove also a "joystick" driver if you have it (I have had problem with it conflicting with the evdev driver).
    Last edited by Hacksign (2015-01-13 09:27:06)

  • [solved] [xorgserver 1.6.1] and the minimalist xorg.conf

    Hello new xorgserver users
    According to the recent xorgserver upgrade to 1.6.1 I've got blackscreen eachtime I started X. The only way to solve that problem (I'm driving a nvidia desktop) was to replace nvidia driver with xf86-video-nv and no use xorg.conf anymore (otherwise X crashes).
    But ctrl+alt+backspace miss me
    And I try to use a minimal xorg.conf with the only three lines :
    Section "ServerFlags"
    Option "DontZap" "false"
    EndSection
    X crashes on start, my Xorg.0.log :
    X.Org X Server 1.6.1
    Release Date: 2009-4-14
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux archibald 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 15 April 2009 11:09:10AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 19 15:27:19 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    Parse error on line 2 of section ServerFlags in file /etc/X11/xorg.conf
    Unexpected EOF. Missing EndSection keyword?
    (EE) Problem parsing the config file
    (EE) Error parsing the config file
    Fatal server error:
    no screens found
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    (WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
    (WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
    some archers use this minimal xorg.conf. Why can't I ?
    Last edited by frenchy (2009-04-19 15:51:35)

    Hy wonder
    The wiki says "ServerFlags"...
    Anyway, the ServerLayout give me (xorg.0.log) :
    Parse error on line 2 of section ServerLayout in file /etc/X11/xorg.conf
    Unexpected EOF. Missing EndSection keyword?
    (EE) Problem parsing the config file
    (EE) Error parsing the config file

  • [Solved] Changed Graphics Driver/Xorg.conf, Font Size Now Different

    Hello,
    I just got the Catalyst 9.4 drivers working on my laptop (Lenovo T400) since the open source ones just can't keep up (even with DRI).
    The problem is now my fonts are all different sizes (or not loading).
    I was thinking this might be because of my monitor settings in xorg.conf.  I've spent a really long time trying to get the catalyst drivers working (I'm doing OpenGL work, so I kinda need them), so I definitely understand why the Arch team took them out of the main repository.  I'm just a little hesitant about changing settings after I finally found a working config.
    Old:
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    # PS/2 Mouse not detected
    # Serial Mouse not detected
    InputDevice "Touchpad" "CorePointer"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "AutoAddDevices" "False"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    Load "synaptics"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    # 640x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    # 720x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    # 640x480 @ 72Hz (VESA) hsync: 37.9kHz
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    # 640x480 @ 75Hz (VESA) hsync: 37.5kHz
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    # 640x480 @ 85Hz (VESA) hsync: 43.3kHz
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    # 800x600 @ 56Hz (VESA) hsync: 35.2kHz
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    # 800x600 @ 72Hz (VESA) hsync: 48.1kHz
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    # 800x600 @ 75Hz (VESA) hsync: 46.9kHz
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    # 800x600 @ 85Hz (VESA) hsync: 53.7kHz
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
    # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    # Additional modelines
    ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    # Extended modelines with GTF timings
    # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
    # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
    # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
    # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
    # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
    # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
    # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
    # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
    ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
    # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
    ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
    # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
    ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
    # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
    ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
    # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
    # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
    ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
    # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
    ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
    # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
    ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
    # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
    ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
    # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
    ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
    # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
    ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
    # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
    ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
    # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
    ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "AccelMethod" # [<str>]
    #Option "offscreensize" # [<str>]
    #Option "SWcursor" # [<bool>]
    #Option "ignoreconnector" # [<str>]
    #Option "forcereduced" # [<bool>]
    #Option "forcedpi" # <i>
    #Option "useconfiguredmonitor" # [<bool>]
    #Option "HPD" # <str>
    #Option "NoRandr" # [<bool>]
    #Option "RROutputOrder" # [<str>]
    #Option "DRI" # [<bool>]
    #Option "TVMode" # [<str>]
    #Option "ScaleType" # [<str>]
    #Option "UseAtomBIOS" # [<bool>]
    #Option "AtomBIOS" # [<str>]
    #Option "UnverifiedFeatures" # [<bool>]
    #Option "Audio" # [<bool>]
    #Option "HDMI" # [<str>]
    #Option "COHERENT" # [<str>]
    Identifier "Card0"
    Driver "radeonhd"
    VendorName "ATI Technologies Inc"
    BoardName "Mobility Radeon HD 3400 Series"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 16
    SubSection "Display"
    Depth 1
    Modes "1440x900
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1440x900
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1440x900
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1440x900
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1440x900
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1440x900
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1440x900"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    New:
    Section "ServerLayout"
    # PS/2 Mouse not detected
    # Serial Mouse not detected
    Identifier "Xorg Configured"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Touchpad" "CorePointer"
    EndSection
    Section "Files"
    # Additional fonts: Locale, Gimp, TTF...
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    FontPath "/usr/share/fonts/cyrillic"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    Load "synaptics"
    EndSection
    #Cut out input devices section...
    Section "Monitor"
    # Warning: This may fry old Monitors
    # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    Identifier "Panel"
    HorizSync 28.0 - 96.0
    VertRefresh 50.0 - 75.0
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
    ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
    ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
    ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
    ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
    ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
    ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
    ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
    ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
    ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
    ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
    ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
    ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
    ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
    ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
    ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
    ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
    ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
    ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
    ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
    ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
    Option "DPMS" "true" #"# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "Panel"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    I just switched to Arch from Debian a few weeks ago, and I had fglrx working with my Debian install, but I'm not really great at configuring Xorg, so I just don't want to break X again.
    /var/log/Xorg.log.0
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.1.901 (1.6.2 RC 1)
    Release Date: 2009-5-8
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH x86_64
    Current Operating System: Linux orion 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 06:42:43 UTC 2009 x86_64
    Build Date: 28 May 2009 08:24:17PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 1 16:24:31 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    (**) | |-->Monitor "Panel"
    (**) | |-->Device "aticonfig-Device[0]-0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Touchpad"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
    (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) No default mouse found, adding one
    (**) |-->Input Device "<default pointer>"
    (II) Loader magic: 0x3540
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@1:0:0) ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
    (II) Loading extension XFree86-DRI
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.60.3
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
    (II) Loading extension GLX
    (II) LoadModule: "type1"
    (WW) Warning, couldn't open module type1
    (II) UnloadModule: "type1"
    (EE) Failed to load module "type1" (module does not exist, 0)
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.1.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.60.3
    Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "synaptics"
    (II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Primary Device is: PCI 01@00:00:0
    (WW) Falling back to old probe method for fglrx
    (II) ATI Proprietary Linux Driver Version Identifier:8.60.3
    (II) ATI Proprietary Linux Driver Release Identifier: 8.602
    (II) ATI Proprietary Linux Driver Build Date: Apr 1 2009 15:01:03
    (II) Loading PCS database from /etc/ati/amdpcsdb
    (WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
    (WW) Video driver ABI version of the X server is 5.0
    (--) Chipset Supported AMD Graphics Processor (0x95C4) found
    (II) AMD Video driver is running on a device belonging to a group targeted for this release
    (II) AMD Video driver is signed
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) fglrx(0): pEnt->device->identifier=0x1f42030
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [atiddxPreInit] === begin
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) fglrx(0): PCI bus 1 card 0 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "DPMS" "true"
    (II) fglrx(0): 10BitPixelFormat disabled by default
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (**) fglrx(0): Gamma Correction for I is 0x06419064
    (==) fglrx(0): Gamma Correction for II is 0x06419064
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (Chipset = 0x95c4)
    (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x210e)
    (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
    (--) fglrx(0): MMIO registers at 0xcfff0000
    (--) fglrx(0): I/O port at 0x00002000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 3.0
    (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    (II) fglrx(0): VESA VBE OEM Software Rev: 10.88
    (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
    (II) fglrx(0): VESA VBE OEM Product: M82
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (II) fglrx(0): Using adapter: 1:0.0.
    (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
    (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
    (II) fglrx(0): PCIE card detected
    (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    (WW) fglrx(0): board is an unknown third party board, chipset is supported
    (II) fglrx(0): RandR 1.2 support is enabled!
    (II) fglrx(0): RandR 1.2 rotation support is enabled!
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
    (II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
    (II) fglrx(0): Display1 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: LEN Model: 4036 Serial#: 0
    (II) fglrx(0): Year: 2008 Week: 0
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Digital Display Input
    (II) fglrx(0): Max Image Size [cm]: horiz.: 30 vert.: 19
    (II) fglrx(0): Gamma: 2.20
    (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
    (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.571 redY: 0.340 greenX: 0.338 greenY: 0.542
    (II) fglrx(0): blueX: 0.158 blueY: 0.125 whiteX: 0.313 whiteY: 0.329
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 101.6 MHz Image Size: 304 x 190 mm
    (II) fglrx(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1824 h_border: 0
    (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 85.6 MHz Image Size: 304 x 190 mm
    (II) fglrx(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1848 h_border: 0
    (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
    (WW) fglrx(0): Unknown vendor-specific block f
    (II) fglrx(0): LP141WP2-TLB1
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0): 00ffffffffffff0030ae364000000000
    (II) fglrx(0): 00120103801e1378ea4b859257568a28
    (II) fglrx(0): 20505400000001010101010101010101
    (II) fglrx(0): 010101010101b027a08051841a303020
    (II) fglrx(0): 360030be100000197021a09851841a30
    (II) fglrx(0): 3020360030be100000190000000f0095
    (II) fglrx(0): 0a32950a28191900320c3c01000000fe
    (II) fglrx(0): 004c503134315750322d544c4231001f
    (II) fglrx(0): End of Display1 EDID data --------------------
    (II) fglrx(0): Output LCD using monitor section Panel
    (II) fglrx(0): Output DFP1 has no monitor section
    (II) fglrx(0): Output CRT1 has no monitor section
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    (II) fglrx(0): Output LCD connected
    (II) fglrx(0): Output DFP1 disconnected
    (II) fglrx(0): Output CRT1 disconnected
    (II) fglrx(0): Using exact sizes for initial modes
    (II) fglrx(0): Output LCD using initial mode 1440x900
    (**) fglrx(0): Display dimensions: (300, 190) mm
    (**) fglrx(0): DPI set to (121, 192)
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) fglrx(0): QBS disabled
    (==) fglrx(0): FAST_SWAP disabled
    (==) fglrx(0): PseudoColor visuals disabled
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
    (==) fglrx(0): NoDRI = NO
    (==) fglrx(0): Capabilities: 0x00000000
    (==) fglrx(0): CapabilitiesEx: 0x00000000
    (==) fglrx(0): cpuFlags: 0x8000001d
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (II) fglrx(0): [pcie] 1986560 kB allocated
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (==) fglrx(0): UseFastTLS=0
    (==) fglrx(0): BlockSignalsOnLock=1
    (II) fglrx(0): Direct rendering enabled
    (II) fglrx(0): AC Adapter is used
    (II) fglrx(0): Interrupt handler installed at IRQ 32.
    (II) fglrx(0): Finished Initialize PPLIB!
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
    (WW) fglrx(0): could not detect X server version (query_status=-1)
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    (II) fglrx(0): DRIScreenInit for fglrx driver
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (II) fglrx(0): [drm] DRM interface version 1.0
    (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
    (II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
    (II) fglrx(0): [drm] mapped SAREA 0x2000 to 0x7ff050dab000
    (II) fglrx(0): [drm] framebuffer handle = 0x3000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0): Name: fglrx
    (II) fglrx(0): Version: 8.60.3
    (II) fglrx(0): Date: Apr 1 2009
    (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.29-ARCH
    (II) fglrx(0): Build-Kernel MODVERSIONS: no
    (II) fglrx(0): Build-Kernel __SMP__: no
    (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    (II) fglrx(0): [drm] register handle = 0x00004000
    (II) fglrx(0): Display width adjusted to to 1536 due to alignment constraints
    (II) fglrx(0): DRI initialization successfull!
    (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x010bc000
    (II) fglrx(0): FBMM initialized for area (0,0)-(1536,2856)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(1536,1536) (front color buffer - assumption)
    (II) fglrx(0): Largest offscreen area available: 1536 x 1320
    (==) fglrx(0): Backing store disabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (**) fglrx(0): DPMS enabled
    (II) fglrx(0): Initialized in-driver Xinerama extension
    (**) fglrx(0): Textured Video is enabled.
    (II) LoadModule: "glesx"
    (II) Loading /usr/lib/xorg/modules//glesx.so
    (II) Module glesx: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
    (II) Loading extension GLESX
    (II) fglrx(0): GLESX enableFlags = 94
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    Solid Horizontal and Vertical Lines
    Driver provided ScreenToScreenBitBlt replacement
    Driver provided FillSolidRects replacement
    (II) fglrx(0): GLESX is enabled
    (II) LoadModule: "amdxmm"
    (II) Loading /usr/lib/xorg/modules//amdxmm.so
    (II) Module amdxmm: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
    (II) Loading extension AMDXVOPL
    (II) fglrx(0): UVD2 feature is available
    (II) fglrx(0): Enable composite support successfully
    (II) fglrx(0): X context handle = 0x1
    (II) fglrx(0): [DRI] installation complete
    (==) fglrx(0): Silken mouse enabled
    (==) fglrx(0): Using HW cursor of display infrastructure!
    (==) fglrx(0): Using software cursor
    (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (WW) AIGLX: 3D driver claims to not support visual 0x23
    (WW) AIGLX: 3D driver claims to not support visual 0x24
    (WW) AIGLX: 3D driver claims to not support visual 0x25
    (WW) AIGLX: 3D driver claims to not support visual 0x26
    (WW) AIGLX: 3D driver claims to not support visual 0x27
    (WW) AIGLX: 3D driver claims to not support visual 0x28
    (WW) AIGLX: 3D driver claims to not support visual 0x29
    (WW) AIGLX: 3D driver claims to not support visual 0x2a
    (WW) AIGLX: 3D driver claims to not support visual 0x2b
    (WW) AIGLX: 3D driver claims to not support visual 0x2c
    (WW) AIGLX: 3D driver claims to not support visual 0x2d
    (WW) AIGLX: 3D driver claims to not support visual 0x2e
    (WW) AIGLX: 3D driver claims to not support visual 0x2f
    (WW) AIGLX: 3D driver claims to not support visual 0x30
    (WW) AIGLX: 3D driver claims to not support visual 0x31
    (WW) AIGLX: 3D driver claims to not support visual 0x32
    (WW) AIGLX: 3D driver claims to not support visual 0x33
    (WW) AIGLX: 3D driver claims to not support visual 0x34
    (WW) AIGLX: 3D driver claims to not support visual 0x35
    (WW) AIGLX: 3D driver claims to not support visual 0x36
    (WW) AIGLX: 3D driver claims to not support visual 0x37
    (WW) AIGLX: 3D driver claims to not support visual 0x38
    (WW) AIGLX: 3D driver claims to not support visual 0x39
    (WW) AIGLX: 3D driver claims to not support visual 0x3a
    (WW) AIGLX: 3D driver claims to not support visual 0x3b
    (WW) AIGLX: 3D driver claims to not support visual 0x3c
    (WW) AIGLX: 3D driver claims to not support visual 0x3d
    (WW) AIGLX: 3D driver claims to not support visual 0x3e
    (WW) AIGLX: 3D driver claims to not support visual 0x3f
    (WW) AIGLX: 3D driver claims to not support visual 0x40
    (WW) AIGLX: 3D driver claims to not support visual 0x41
    (WW) AIGLX: 3D driver claims to not support visual 0x42
    (WW) AIGLX: 3D driver claims to not support visual 0x43
    (WW) AIGLX: 3D driver claims to not support visual 0x44
    (WW) AIGLX: 3D driver claims to not support visual 0x45
    (WW) AIGLX: 3D driver claims to not support visual 0x46
    (WW) AIGLX: 3D driver claims to not support visual 0x47
    (WW) AIGLX: 3D driver claims to not support visual 0x48
    (WW) AIGLX: 3D driver claims to not support visual 0x49
    (WW) AIGLX: 3D driver claims to not support visual 0x4a
    (WW) AIGLX: 3D driver claims to not support visual 0x4b
    (WW) AIGLX: 3D driver claims to not support visual 0x4c
    (WW) AIGLX: 3D driver claims to not support visual 0x4d
    (WW) AIGLX: 3D driver claims to not support visual 0x4e
    (WW) AIGLX: 3D driver claims to not support visual 0x4f
    (WW) AIGLX: 3D driver claims to not support visual 0x50
    (WW) AIGLX: 3D driver claims to not support visual 0x51
    (WW) AIGLX: 3D driver claims to not support visual 0x52
    (WW) AIGLX: 3D driver claims to not support visual 0x53
    (WW) AIGLX: 3D driver claims to not support visual 0x54
    (WW) AIGLX: 3D driver claims to not support visual 0x55
    (WW) AIGLX: 3D driver claims to not support visual 0x56
    (WW) AIGLX: 3D driver claims to not support visual 0x57
    (WW) AIGLX: 3D driver claims to not support visual 0x58
    (WW) AIGLX: 3D driver claims to not support visual 0x59
    (WW) AIGLX: 3D driver claims to not support visual 0x5a
    (WW) AIGLX: 3D driver claims to not support visual 0x5b
    (WW) AIGLX: 3D driver claims to not support visual 0x5c
    (WW) AIGLX: 3D driver claims to not support visual 0x5d
    (WW) AIGLX: 3D driver claims to not support visual 0x5e
    (WW) AIGLX: 3D driver claims to not support visual 0x5f
    (WW) AIGLX: 3D driver claims to not support visual 0x60
    (WW) AIGLX: 3D driver claims to not support visual 0x61
    (WW) AIGLX: 3D driver claims to not support visual 0x62
    (WW) AIGLX: 3D driver claims to not support visual 0x63
    (WW) AIGLX: 3D driver claims to not support visual 0x64
    (WW) AIGLX: 3D driver claims to not support visual 0x65
    (WW) AIGLX: 3D driver claims to not support visual 0x66
    (WW) AIGLX: 3D driver claims to not support visual 0x67
    (WW) AIGLX: 3D driver claims to not support visual 0x68
    (WW) AIGLX: 3D driver claims to not support visual 0x69
    (WW) AIGLX: 3D driver claims to not support visual 0x6a
    (WW) AIGLX: 3D driver claims to not support visual 0x6b
    (WW) AIGLX: 3D driver claims to not support visual 0x6c
    (WW) AIGLX: 3D driver claims to not support visual 0x6d
    (WW) AIGLX: 3D driver claims to not support visual 0x6e
    (WW) AIGLX: 3D driver claims to not support visual 0x6f
    (WW) AIGLX: 3D driver claims to not support visual 0x70
    (WW) AIGLX: 3D driver claims to not support visual 0x71
    (WW) AIGLX: 3D driver claims to not support visual 0x72
    (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) fglrx(0): Enable the clock gating!
    (II) fglrx(0): Setting screen physical size to 304 x 190
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (WW) Option "XkbVariant" requires an string value
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) Synaptics touchpad driver version 1.1.2
    (--) Touchpad auto-dev sets device to /dev/input/event11
    (**) Option "Device" "/dev/input/event11"
    (II) Touchpad: x-axis range 1472 - 5472
    (II) Touchpad: y-axis range 1408 - 4448
    (II) Touchpad: pressure range 0 - 255
    (II) Touchpad: finger width range 0 - 0
    (II) Touchpad: buttons: left right middle
    (**) Option "SHMConfig" "on"
    (**) Option "LeftEdge" "1632"
    (**) Option "RightEdge" "5312"
    (**) Option "TopEdge" "1575"
    (**) Option "BottomEdge" "4281"
    (**) Option "FingerLow" "25"
    (**) Option "FingerHigh" "30"
    (**) Option "MaxTapTime" "180"
    (**) Option "MaxTapMove" "220"
    (**) Option "EmulateTwoFingerMinZ" "0"
    (**) Option "VertScrollDelta" "100"
    (**) Option "VertEdgeScroll" "on"
    (**) Option "HorizEdgeScroll" "on"
    (**) Option "VertTwoFingerScroll" "on"
    (**) Option "HorizTwoFingerScroll" "on"
    (**) Option "MinSpeed" "0.20"
    (**) Option "MaxSpeed" "1.00"
    (**) Option "AccelFactor" "0.0020"
    (--) Touchpad: touchpad found
    (**) Option "AlwaysCore"
    (**) Option "SendCoreEvents" "true"
    (**) Option "CorePointer"
    (**) Touchpad: always reports core events
    (II) XINPUT: Adding extended input device "Touchpad" (type: TOUCHPAD)
    (**) Touchpad: (accel) keeping acceleration scheme 1
    (**) Touchpad: (accel) filter chain progression: 2.00
    (**) Touchpad: (accel) filter stage 0: 20.00 ms
    (**) Touchpad: (accel) set acceleration profile 0
    (--) Touchpad: touchpad found
    (WW) <default pointer>: No Device specified, looking for one...
    (II) <default pointer>: Setting Device option to "/dev/input/mice"
    (--) <default pointer>: Device: "/dev/input/mice"
    (==) <default pointer>: Protocol: "Auto"
    (**) Option "AlwaysCore"
    (**) <default pointer>: always reports core events
    (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
    (**) <default pointer>: ZAxisMapping: buttons 4 and 5
    (**) <default pointer>: Buttons: 9
    (**) <default pointer>: Sensitivity: 1
    (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
    (**) <default pointer>: (accel) keeping acceleration scheme 1
    (**) <default pointer>: (accel) filter chain progression: 2.00
    (**) <default pointer>: (accel) filter stage 0: 20.00 ms
    (**) <default pointer>: (accel) set acceleration profile 0
    (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
    (II) <default pointer>: ps2EnableDataReporting: succeeded
    (II) fglrx(0): Restoring recent mode: 1440x900@50Hz
    swlDalGetDisplayIndex:ERROR: The number of Active Displays is 0
    swlDalGetDisplayIndex:ERROR: The number of Active Displays is 0
    (II) config/hal: Adding input device ThinkPad Extra Buttons
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Video Bus
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    (II) config/hal: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) 3rd Button detected: disabling emulate3Button
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    Thanks a bunch for any suggestions, xorg.conf can be a bit confusing for me.
    Last edited by atrium (2009-06-02 10:20:56)

    iphitus wrote:
    Could be dpi.
    What are you using to login?
    if it's startx, you can do startx -- -dpi 96
    if it's a login manager, you'll need to edit it's configuration and set it otherwise.
    Thanks for the quick reply.  I'm starting slim as a daemon at bootup inside /etc/rc.conf, then using XFCE4.

  • [SOLVED]Complicated Xorg.conf

    I'm trying to make a good xorg.conf.d directory for this configuration
    My configuration
    Ecran 1 (DVI) -- Ecran 2 (HDMI) -     - Ecran 3 (VGA) -- Ecran 4 (DVI)
    |                                                 |         |                                         |
    |____________________________|         |_______________________|
         Card : Nvidia 9600GT                       Card : ATI
         Resolution : Both 1920x1080           Resolution : Both 1280x1024
    What I already tried
    First
    I found this link http://nouveau.freedesktop.org/wiki/MultiMonitorDesktop
    And I tried this configuration
    Section "ServerLayout"
    Identifier "Layout0"
    Option "Xinerama" "on"
    Option "Clone" "off"
    # You would need one screen for each monitor
    Screen 0 "Screen0"
    Screen 1 "Screen1" RightOf "Screen0"
    Screen 2 "Screen2" RightOf "Screen1"
    Screen 3 "Screen3" RightOf "Screen2"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nouveau"
    # Actual PCI location of first card/gpu
    BusID "PCI:01:0:0"
    # Actual connector - as reported by /sys/class/drm/card0-xx
    Option "ZaphodHeads" "DVI-I-1"
    Screen 0
    EndSection
    Section "Device"
    Identifier "Device1"
    Driver "nouveau"
    # Actual PCI location of first card/gpu
    BusID "PCI:01:0:0"
    # Actual connector - as reported by /sys/class/drm/card0-xx
    Option "ZaphodHeads" "HDMI-A-1"
    Screen 1
    EndSection
    Section "Device"
    Identifier "Device2"
    Driver "radeon"
    # Actual PCI location of second card/gpu
    BusID "PCI:06:0:0"
    # Actual connector - as reported by /sys/class/drm/card1-xx
    Option "ZaphodHeads" "VGA-2"
    Screen 0
    EndSection
    Section "Device"
    Identifier "Device3"
    Driver "radeon"
    # Actual PCI location of second card/gpu
    BusID "PCI:06:0:0"
    # Actual connector - as reported by /sys/class/drm/card1-xx
    Option "ZaphodHeads" "DVI-I-2"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Device1"
    EndSection
    Section "Screen"
    Identifier "Screen2"
    Device "Device2"
    EndSection
    Section "Screen"
    Identifier "Screen3"
    Device "Device3"
    EndSection
    but I had this log
    [ 2261.701]
    X.Org X Server 1.12.2
    Release Date: 2012-05-29
    [ 2261.701] X Protocol Version 11, Revision 0
    [ 2261.701] Build Operating System: Linux 3.0.32-1-lts x86_64
    [ 2261.701] Current Operating System: Linux martin 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
    [ 2261.701] Kernel command line: root=/dev/sda3 ro quiet
    [ 2261.701] Build Date: 30 May 2012 07:24:13PM
    [ 2261.701]
    [ 2261.701] Current version of pixman: 0.26.0
    [ 2261.701] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2261.701] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2261.701] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 11 01:02:17 2012
    [ 2261.701] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2261.701] (==) ServerLayout "Layout0"
    [ 2261.701] (**) |-->Screen "Screen0" (0)
    [ 2261.701] (**) | |-->Monitor "<default monitor>"
    [ 2261.701] (**) | |-->Device "Device0"
    [ 2261.701] (==) No monitor specified for screen "Screen0".
    Using a default monitor configuration.
    [ 2261.701] (**) |-->Screen "Screen1" (1)
    [ 2261.701] (**) | |-->Monitor "<default monitor>"
    [ 2261.701] (**) | |-->Device "Device1"
    [ 2261.701] (==) No monitor specified for screen "Screen1".
    Using a default monitor configuration.
    [ 2261.701] (**) |-->Screen "Screen2" (2)
    [ 2261.701] (**) | |-->Monitor "<default monitor>"
    [ 2261.702] (**) | |-->Device "Device2"
    [ 2261.702] (==) No monitor specified for screen "Screen2".
    Using a default monitor configuration.
    [ 2261.702] (**) |-->Screen "Screen3" (3)
    [ 2261.702] (**) | |-->Monitor "<default monitor>"
    [ 2261.702] (**) | |-->Device "Device3"
    [ 2261.702] (==) No monitor specified for screen "Screen3".
    Using a default monitor configuration.
    [ 2261.702] (**) Option "Xinerama" "on"
    [ 2261.702] (==) Automatically adding devices
    [ 2261.702] (==) Automatically enabling devices
    [ 2261.702] (**) Xinerama: enabled
    [ 2261.702] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2261.702] Entry deleted from font path.
    [ 2261.702] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 2261.702] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2261.702] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2261.702] (II) Loader magic: 0x7c58e0
    [ 2261.702] (II) Module ABI versions:
    [ 2261.702] X.Org ANSI C Emulation: 0.4
    [ 2261.702] X.Org Video Driver: 12.0
    [ 2261.702] X.Org XInput driver : 16.0
    [ 2261.702] X.Org Server Extension : 6.0
    [ 2261.703] (--) PCI:*(0:1:0:0) 10de:0622:1458:34d2 rev 161, Mem @ 0xf6000000/16777216, 0xc0000000/536870912, 0xf4000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x????????/524288
    [ 2261.703] (--) PCI: (0:6:0:0) 1002:5b64:1002:0102 rev 128, Mem @ 0xe8000000/134217728, 0xf7ee0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
    [ 2261.703] (--) PCI: (0:6:0:1) 1002:5b74:1002:0103 rev 128, Mem @ 0xf7ef0000/65536
    [ 2261.703] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2261.703] (II) LoadModule: "extmod"
    [ 2261.703] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 2261.703] (II) Module extmod: vendor="X.Org Foundation"
    [ 2261.703] compiled for 1.12.2, module version = 1.0.0
    [ 2261.703] Module class: X.Org Server Extension
    [ 2261.703] ABI class: X.Org Server Extension, version 6.0
    [ 2261.703] (II) Loading extension MIT-SCREEN-SAVER
    [ 2261.703] (II) Loading extension XFree86-VidModeExtension
    [ 2261.703] (II) Loading extension XFree86-DGA
    [ 2261.703] (II) Loading extension DPMS
    [ 2261.703] (II) Loading extension XVideo
    [ 2261.703] (II) Loading extension XVideo-MotionCompensation
    [ 2261.703] (II) Loading extension X-Resource
    [ 2261.703] (II) LoadModule: "dbe"
    [ 2261.703] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 2261.703] (II) Module dbe: vendor="X.Org Foundation"
    [ 2261.703] compiled for 1.12.2, module version = 1.0.0
    [ 2261.703] Module class: X.Org Server Extension
    [ 2261.703] ABI class: X.Org Server Extension, version 6.0
    [ 2261.704] (II) Loading extension DOUBLE-BUFFER
    [ 2261.704] (II) LoadModule: "glx"
    [ 2261.704] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2261.704] (II) Module glx: vendor="X.Org Foundation"
    [ 2261.704] compiled for 1.12.2, module version = 1.0.0
    [ 2261.704] ABI class: X.Org Server Extension, version 6.0
    [ 2261.704] (==) AIGLX enabled
    [ 2261.704] (II) Loading extension GLX
    [ 2261.704] (II) LoadModule: "record"
    [ 2261.704] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 2261.704] (II) Module record: vendor="X.Org Foundation"
    [ 2261.704] compiled for 1.12.2, module version = 1.13.0
    [ 2261.704] Module class: X.Org Server Extension
    [ 2261.704] ABI class: X.Org Server Extension, version 6.0
    [ 2261.704] (II) Loading extension RECORD
    [ 2261.704] (II) LoadModule: "dri"
    [ 2261.704] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 2261.704] (II) Module dri: vendor="X.Org Foundation"
    [ 2261.704] compiled for 1.12.2, module version = 1.0.0
    [ 2261.704] ABI class: X.Org Server Extension, version 6.0
    [ 2261.704] (II) Loading extension XFree86-DRI
    [ 2261.704] (II) LoadModule: "dri2"
    [ 2261.704] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 2261.704] (II) Module dri2: vendor="X.Org Foundation"
    [ 2261.704] compiled for 1.12.2, module version = 1.2.0
    [ 2261.704] ABI class: X.Org Server Extension, version 6.0
    [ 2261.704] (II) Loading extension DRI2
    [ 2261.704] (II) LoadModule: "nouveau"
    [ 2261.704] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 2261.705] (II) Module nouveau: vendor="X.Org Foundation"
    [ 2261.705] compiled for 1.12.1.902, module version = 0.0.16
    [ 2261.705] Module class: X.Org Video Driver
    [ 2261.705] ABI class: X.Org Video Driver, version 12.0
    [ 2261.705] (II) LoadModule: "radeon"
    [ 2261.705] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 2261.705] (II) Module radeon: vendor="X.Org Foundation"
    [ 2261.705] compiled for 1.12.1.902, module version = 6.14.99
    [ 2261.705] Module class: X.Org Video Driver
    [ 2261.705] ABI class: X.Org Video Driver, version 12.0
    [ 2261.705] (II) NOUVEAU driver
    [ 2261.705] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 2261.705] RIVA TNT (NV04)
    [ 2261.705] RIVA TNT2 (NV05)
    [ 2261.705] GeForce 256 (NV10)
    [ 2261.705] GeForce 2 (NV11, NV15)
    [ 2261.705] GeForce 4MX (NV17, NV18)
    [ 2261.705] GeForce 3 (NV20)
    [ 2261.705] GeForce 4Ti (NV25, NV28)
    [ 2261.705] GeForce FX (NV3x)
    [ 2261.705] GeForce 6 (NV4x)
    [ 2261.705] GeForce 7 (G7x)
    [ 2261.705] GeForce 8 (G8x)
    [ 2261.705] GeForce GTX 200 (NVA0)
    [ 2261.705] GeForce GTX 400 (NVC0)
    [ 2261.705] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA
    [ 2261.708] (--) using VT number 8
    [ 2261.710] drmOpenDevice: node name is /dev/dri/card0
    [ 2261.710] drmOpenDevice: open result is 7, (OK)
    [ 2261.710] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 2261.710] drmOpenDevice: node name is /dev/dri/card0
    [ 2261.710] drmOpenDevice: open result is 7, (OK)
    [ 2261.710] drmOpenByBusid: drmOpenMinor returns 7
    [ 2261.710] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 2261.710] (II) [drm] nouveau interface version: 0.0.16
    [ 2261.710] drmOpenDevice: node name is /dev/dri/card0
    [ 2261.710] drmOpenDevice: open result is 7, (OK)
    [ 2261.710] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 2261.710] drmOpenDevice: node name is /dev/dri/card0
    [ 2261.710] drmOpenDevice: open result is 7, (OK)
    [ 2261.710] drmOpenByBusid: drmOpenMinor returns 7
    [ 2261.710] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 2261.710] (II) [drm] nouveau interface version: 0.0.16
    [ 2261.710] (II) [KMS] Kernel modesetting enabled.
    [ 2261.710] (II) [KMS] Kernel modesetting enabled.
    [ 2261.710] (II) Loading sub module "dri"
    [ 2261.710] (II) LoadModule: "dri"
    [ 2261.710] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 2261.710] (II) Module dri: vendor="X.Org Foundation"
    [ 2261.710] compiled for 1.12.2, module version = 1.0.0
    [ 2261.710] ABI class: X.Org Server Extension, version 6.0
    [ 2261.710] (II) NOUVEAU(0): Loaded DRI module
    [ 2261.710] drmOpenDevice: node name is /dev/dri/card0
    [ 2261.710] drmOpenDevice: open result is 8, (OK)
    [ 2261.710] drmOpenDevice: node name is /dev/dri/card0
    [ 2261.710] drmOpenDevice: open result is 8, (OK)
    [ 2261.710] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 2261.710] drmOpenDevice: node name is /dev/dri/card0
    [ 2261.710] drmOpenDevice: open result is 8, (OK)
    [ 2261.710] drmOpenByBusid: drmOpenMinor returns 8
    [ 2261.710] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 2261.710] (II) [drm] DRM interface version 1.4
    [ 2261.710] (II) [drm] DRM open master succeeded.
    [ 2261.710] (--) NOUVEAU(0): Chipset: "NVIDIA NV94"
    [ 2261.710] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Screen0" for depth/fbbpp 24/32
    [ 2261.710] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 2261.710] (==) NOUVEAU(0): RGB weight 888
    [ 2261.710] (==) NOUVEAU(0): Default visual is TrueColor
    [ 2261.710] (**) NOUVEAU(0): Option "ZaphodHeads" "DVI-I-1"
    [ 2261.710] (==) NOUVEAU(0): Using HW cursor
    [ 2261.710] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 2261.710] (==) NOUVEAU(0): Page flipping enabled
    [ 2261.710] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 2261.781] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
    [ 2261.942] (II) NOUVEAU(0): EDID for output DVI-I-1
    [ 2261.942] (II) NOUVEAU(0): Manufacturer: IVM Model: 560c Serial#: 2768
    [ 2261.942] (II) NOUVEAU(0): Year: 2010 Week: 39
    [ 2261.942] (II) NOUVEAU(0): EDID Version: 1.3
    [ 2261.942] (II) NOUVEAU(0): Digital Display Input
    [ 2261.942] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52 vert.: 29
    [ 2261.942] (II) NOUVEAU(0): Gamma: 2.20
    [ 2261.942] (II) NOUVEAU(0): DPMS capabilities: Off
    [ 2261.942] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 2261.942] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 2261.942] (II) NOUVEAU(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609
    [ 2261.942] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
    [ 2261.942] (II) NOUVEAU(0): Supported established timings:
    [ 2261.942] (II) NOUVEAU(0): 720x400@70Hz
    [ 2261.942] (II) NOUVEAU(0): 640x480@60Hz
    [ 2261.942] (II) NOUVEAU(0): 640x480@67Hz
    [ 2261.942] (II) NOUVEAU(0): 640x480@72Hz
    [ 2261.942] (II) NOUVEAU(0): 640x480@75Hz
    [ 2261.942] (II) NOUVEAU(0): 800x600@56Hz
    [ 2261.942] (II) NOUVEAU(0): 800x600@60Hz
    [ 2261.942] (II) NOUVEAU(0): 800x600@72Hz
    [ 2261.942] (II) NOUVEAU(0): 800x600@75Hz
    [ 2261.942] (II) NOUVEAU(0): 832x624@75Hz
    [ 2261.942] (II) NOUVEAU(0): 1024x768@60Hz
    [ 2261.942] (II) NOUVEAU(0): 1024x768@70Hz
    [ 2261.942] (II) NOUVEAU(0): 1024x768@75Hz
    [ 2261.942] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 2261.942] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 2261.942] (II) NOUVEAU(0): Supported standard timings:
    [ 2261.942] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 2261.942] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 2261.942] (II) NOUVEAU(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 2261.942] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 2261.942] (II) NOUVEAU(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 2261.942] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 2261.942] (II) NOUVEAU(0): Supported detailed timing:
    [ 2261.942] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
    [ 2261.942] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 2261.942] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 2261.942] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 2261.942] (II) NOUVEAU(0): Monitor name: PL2409HD
    [ 2261.942] (II) NOUVEAU(0): Serial No: 11077M0902768
    [ 2261.942] (II) NOUVEAU(0): Supported detailed timing:
    [ 2261.942] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
    [ 2261.942] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
    [ 2261.942] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
    [ 2261.942] (II) NOUVEAU(0): Supported detailed timing:
    [ 2261.942] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
    [ 2261.942] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 2261.942] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 2261.942] (II) NOUVEAU(0): Supported detailed timing:
    [ 2261.942] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
    [ 2261.942] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 2261.942] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 2261.942] (II) NOUVEAU(0): Supported detailed timing:
    [ 2261.942] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
    [ 2261.942] (II) NOUVEAU(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
    [ 2261.942] (II) NOUVEAU(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
    [ 2261.942] (II) NOUVEAU(0): Number of EDID sections to follow: 1
    [ 2261.942] (II) NOUVEAU(0): EDID (in hex):
    [ 2261.942] (II) NOUVEAU(0): 00ffffffffffff0026cd0c56d00a0000
    [ 2261.942] (II) NOUVEAU(0): 2714010380341d782a6041a6564a9c25
    [ 2261.942] (II) NOUVEAU(0): 125054bfef0081808140714f9500950f
    [ 2261.942] (II) NOUVEAU(0): b30001010101023a801871382d40582c
    [ 2261.942] (II) NOUVEAU(0): 450009252100001e000000fd00384c1e
    [ 2261.942] (II) NOUVEAU(0): 5311000a202020202020000000fc0050
    [ 2261.942] (II) NOUVEAU(0): 4c3234303948440a20202020000000ff
    [ 2261.942] (II) NOUVEAU(0): 0031313037374d303930323736380180
    [ 2261.942] (II) NOUVEAU(0): EDID vendor "IVM", prod id 22028
    [ 2261.942] (II) NOUVEAU(0): Using EDID range info for horizontal sync
    [ 2261.942] (II) NOUVEAU(0): Using EDID range info for vertical refresh
    [ 2261.942] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 2261.942] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 2261.942] (II) NOUVEAU(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
    [ 2261.942] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2261.942] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "1440x576"x50.0 54.00 1440 1464 1592 1728 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 2261.943] (II) NOUVEAU(0): Output DVI-I-1 connected
    [ 2261.943] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 2261.943] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
    [ 2261.943] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 2261.943] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 37.5 kHz, 50.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "1440x576": 54.0 MHz (scaled from 0.0 MHz), 31.2 kHz, 50.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "1440x576"x50.0 54.00 1440 1464 1592 1728 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "720x576": 27.0 MHz (scaled from 0.0 MHz), 31.2 kHz, 50.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "720x480": 27.0 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 2261.943] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 2261.943] (**) NOUVEAU(0): Display dimensions: (520, 290) mm
    [ 2261.943] (**) NOUVEAU(0): DPI set to (93, 94)
    [ 2261.943] (II) Loading sub module "fb"
    [ 2261.943] (II) LoadModule: "fb"
    [ 2261.943] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2261.943] (II) Module fb: vendor="X.Org Foundation"
    [ 2261.943] compiled for 1.12.2, module version = 1.0.0
    [ 2261.944] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2261.944] (II) Loading sub module "exa"
    [ 2261.944] (II) LoadModule: "exa"
    [ 2261.944] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 2261.944] (II) Module exa: vendor="X.Org Foundation"
    [ 2261.944] compiled for 1.12.2, module version = 2.5.0
    [ 2261.944] ABI class: X.Org Video Driver, version 12.0
    [ 2261.944] (II) Loading sub module "shadowfb"
    [ 2261.944] (II) LoadModule: "shadowfb"
    [ 2261.944] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 2261.944] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 2261.944] compiled for 1.12.2, module version = 1.0.0
    [ 2261.944] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2261.944] (II) Loading sub module "dri"
    [ 2261.944] (II) LoadModule: "dri"
    [ 2261.944] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 2261.944] (II) Module dri: vendor="X.Org Foundation"
    [ 2261.944] compiled for 1.12.2, module version = 1.0.0
    [ 2261.944] ABI class: X.Org Server Extension, version 6.0
    [ 2261.944] (II) NOUVEAU(1): Loaded DRI module
    [ 2261.944] (--) NOUVEAU(1): Chipset: "NVIDIA NV94"
    [ 2261.944] (II) NOUVEAU(1): Creating default Display subsection in Screen section
    "Screen1" for depth/fbbpp 24/32
    [ 2261.944] (==) NOUVEAU(1): Depth 24, (--) framebuffer bpp 32
    [ 2261.944] (==) NOUVEAU(1): RGB weight 888
    [ 2261.944] (==) NOUVEAU(1): Default visual is TrueColor
    [ 2261.944] (**) NOUVEAU(1): Option "ZaphodHeads" "HDMI-A-1"
    [ 2261.944] (==) NOUVEAU(1): Using HW cursor
    [ 2261.944] (==) NOUVEAU(1): GLX sync to VBlank disabled.
    [ 2261.944] (==) NOUVEAU(1): Page flipping enabled
    [ 2261.944] (==) NOUVEAU(1): Swap limit set to 2 [Max allowed 2]
    [ 2262.104] (WW) NOUVEAU(1): No outputs definitely connected, trying again...
    [ 2262.104] (WW) NOUVEAU(1): Unable to find connected outputs - setting 1024x768 initial framebuffer
    [ 2262.104] (II) NOUVEAU(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 2262.104]
    [ 2262.104] Backtrace:
    [ 2262.104] 0: /usr/bin/X (xorg_backtrace+0x36) [0x55db86]
    [ 2262.104] 1: /usr/bin/X (0x400000+0x1615b9) [0x5615b9]
    [ 2262.104] 2: /lib/libpthread.so.0 (0x7f171091b000+0xf140) [0x7f171092a140]
    [ 2262.104] 3: /usr/bin/X (xf86SetScrnInfoModes+0x275) [0x49f4e5]
    [ 2262.105] 4: /usr/bin/X (xf86InitialConfiguration+0x1595) [0x4a2e45]
    [ 2262.105] 5: /usr/lib/xorg/modules/drivers/nouveau_drv.so (0x7f170d9f7000+0x2556d) [0x7f170da1c56d]
    [ 2262.105] 6: /usr/lib/xorg/modules/drivers/nouveau_drv.so (0x7f170d9f7000+0xf456) [0x7f170da06456]
    [ 2262.105] 7: /usr/bin/X (InitOutput+0x8ba) [0x47206a]
    [ 2262.105] 8: /usr/bin/X (0x400000+0x23066) [0x423066]
    [ 2262.105] 9: /lib/libc.so.6 (__libc_start_main+0xf5) [0x7f170f7d3455]
    [ 2262.105] 10: /usr/bin/X (0x400000+0x234dd) [0x4234dd]
    [ 2262.105]
    [ 2262.105] Segmentation fault at address (nil)
    [ 2262.105]
    Fatal server error:
    [ 2262.105] Caught signal 11 (Segmentation fault). Server aborting
    [ 2262.105]
    [ 2262.105]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 2262.105] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 2262.105]
    [ 2262.109] Server terminated with error (1). Closing log file.
    I tried too without Xinerama but it didn't work.
    Second
    I tried this conf too
    10-cards.conf
    Section "Device"
    Identifier "cartenvidia"
    Driver "nouveau"
    BusID "PCI:01:0:0"
    EndSection
    Section "Device"
    Identifier "carteati"
    Driver "radeon"
    BusID "PCI:06:0:0"
    EndSection
    10-screen.conf
    Section "Monitor"
    Identifier "Monitor0"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    EndSection
    Section "Monitor"
    Identifier "Monitor2"
    EndSection
    Section "Monitor"
    Identifier "Monitor3"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "cartenvidia"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "cartenvidia"
    Monitor "Monitor1"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen2"
    Device "carteati"
    Monitor "Monitor2"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen3"
    Device "carteati"
    Monitor "Monitor3"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    and 10-serverlayout.conf
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    Screen 2 "Screen2" RightOf "Screen1"
    Screen 3 "Screen3" RightOf "Screen2"
    Option "Xinerama" "0"
    EndSection
    And I succeed to make all the screens works but monitors on the same card was cloned.
    I succeed to make them works with Arandr next to each others but I had a strange bug (because of Xinerama I think)
    Well, I don't know what to do.. If somebody know how to make it works.. !
    Thank you !
    Last edited by shox (2012-06-22 17:53:45)

    ConnorBehan,
    With this file
    Section "ServerLayout"
    Identifier "Layout0"
    Option "Xinerama" "off"
    Option "Clone" "off"
    # You would need one screen for each monitor
    Screen 0 "Screen0"
    Screen 1 "Screen1" RightOf "Screen0"
    Screen 2 "Screen2" RightOf "Screen1"
    Screen 3 "Screen3" RightOf "Screen2"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nouveau"
    # Actual PCI location of first card/gpu
    BusID "PCI:01:0:0"
    # Actual connector - as reported by /sys/class/drm/card0-xx
    Option "ZaphodHeads" "DVI-I-1"
    Screen 0
    EndSection
    Section "Device"
    Identifier "Device1"
    Driver "nouveau"
    # Actual PCI location of first card/gpu
    BusID "PCI:01:0:0"
    # Actual connector - as reported by /sys/class/drm/card0-xx
    Option "ZaphodHeads" "HDMI-A-1"
    Screen 1
    EndSection
    Section "Device"
    Identifier "Device2"
    Driver "radeon"
    # Actual PCI location of second card/gpu
    BusID "PCI:06:0:0"
    # Actual connector - as reported by /sys/class/drm/card1-xx
    Option "ZaphodHeads" "VGA-2"
    Screen 2
    EndSection
    Section "Device"
    Identifier "Device3"
    Driver "radeon"
    # Actual PCI location of second card/gpu
    BusID "PCI:06:0:0"
    # Actual connector - as reported by /sys/class/drm/card1-xx
    Option "ZaphodHeads" "DVI-I-2"
    Screen 3
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Device1"
    EndSection
    Section "Screen"
    Identifier "Screen2"
    Device "Device2"
    EndSection
    Section "Screen"
    Identifier "Screen3"
    Device "Device3"
    EndSection
    The X server don't run and I have this error at the end of my Xorg.0.log
    [ 22245.809] (WW) NOUVEAU(1): No outputs definitely connected, trying again...
    [ 22245.809] (WW) NOUVEAU(1): Unable to find connected outputs - setting 1024x768 initial framebuffer
    [ 22245.809] (II) NOUVEAU(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 22245.809]
    [ 22245.809] Backtrace:
    [ 22245.809] 0: /usr/bin/X (xorg_backtrace+0x36) [0x55db86]
    [ 22245.809] 1: /usr/bin/X (0x400000+0x1615b9) [0x5615b9]
    [ 22245.809] 2: /lib/libpthread.so.0 (0x7f985710e000+0xf140) [0x7f985711d140]
    [ 22245.809] 3: /usr/bin/X (xf86SetScrnInfoModes+0x275) [0x49f4e5]
    [ 22245.809] 4: /usr/bin/X (xf86InitialConfiguration+0x1595) [0x4a2e45]
    [ 22245.809] 5: /usr/lib/xorg/modules/drivers/nouveau_drv.so (0x7f98541ea000+0x25d8d) [0x7f985420fd8d]
    [ 22245.809] 6: /usr/lib/xorg/modules/drivers/nouveau_drv.so (0x7f98541ea000+0xf6c7) [0x7f98541f96c7]
    [ 22245.809] 7: /usr/bin/X (InitOutput+0x8ba) [0x47206a]
    [ 22245.809] 8: /usr/bin/X (0x400000+0x23066) [0x423066]
    [ 22245.809] 9: /lib/libc.so.6 (__libc_start_main+0xf5) [0x7f9855fc6455]
    [ 22245.809] 10: /usr/bin/X (0x400000+0x234dd) [0x4234dd]
    [ 22245.809]
    [ 22245.809] Segmentation fault at address (nil)
    [ 22245.809]
    Fatal server error:
    [ 22245.809] Caught signal 11 (Segmentation fault). Server aborting
    [ 22245.809]
    [ 22245.809]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 22245.809] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 22245.809]
    [ 22245.813] Server terminated with error (1). Closing log file.
    I don't understand the error.. Thanks for your help
    EDIT : These lignes were wrong
    Option "ZaphodHeads" "xxxx-x"
    (and they was specific to the Nouveau driver), But now, How can I set the out of the cards for the monitors...?
    Last edited by shox (2012-06-22 13:04:37)

  • I can't configure and create xorg.conf [ATI drivers]

    Anybody have an idea HELP!!. I cannot create xorg.conf.
    Follow this steps, but i can't configure this drivers.  :x
    My VGA is ATI 9550.
    [root@nube jack]# pacman -Q ati-fglrx ati-fglrx-utils
    ati-fglrx 8.25.18-1
    ati-fglrx-utils 8.25.18-1
    # dmesg
    Linux agpgart interface v0.101 (c) Dave Jones
    fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
    [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0
    [jack@nube ~]$ lsmod | grep fglrx
    fglrx 382828 0
    agpgart 27108 2 via_agp,fglrx
    [jack@nube ~]$ fglrxinfo
    Xlib: extension "XFree86-DRI" missing on display ":0.0".
    display: :0.0 screen: 0
    OpenGL vendor string: Mesa project: www.mesa3d.org
    OpenGL renderer string: Mesa GLX Indirect
    OpenGL version string: 1.2 (1.5 Mesa 6.4.2)
    [root@nube jack]# glxinfo
    glxinfo: error while loading shared libraries: libGLU.so.1: cannot open shared object file: No such file or directory
    [root@nube jack]# locate libGL.so
    /usr/lib/libGL.so.1.2
    /usr/lib/libGL.so
    /usr/lib/libGL.so.1
    [root@nube X11]# aticonfig --initial --input=/etc/X11/xorg.conf
    Warning: Could not find configuration file
    Please copy configuration file template to /etc/X11
    [root@nube X11]# Xorg -configure
    X Window System Version 7.0.0
    Release Date: 21 December 2005
    X Protocol Version 11, Revision 0, Release 7.0
    Build Operating System:Linux 2.6.16-ARCH i686
    Current Operating System: Linux nube 2.6.16-ARCH #1 SMP PREEMPT Tue Jun 6 08:33:18 UTC 2006 i686
    Build Date: 04 May 2006
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 11 10:39:07 2006
    List of video drivers:
    voodoo
    apm
    ark
    radeon
    r128
    ati
    atimisc
    chips
    cirrus
    dummy
    vmware
    glint
    i128
    i740
    i810
    imstt
    mga
    neomagic
    newport
    nv
    rendition
    s3
    s3virge
    savage
    siliconmotion
    sis
    sisusb
    tdfx
    trident
    tseng
    via
    v4l
    fglrx
    fbdev
    vesa
    vga
    *** If unresolved symbols were reported above, they might not
    *** be the reason for the server aborting.
    Backtrace:
    0: Xorg(xf86SigHandler+0x88) [0x80ba6a8]
    1: [0xffffe420]
    2: /usr/lib/xorg/modules/drivers/fglrx_drv.so(R200Probe+0x124) [0xb72fdbd4]
    3: Xorg(DoConfigure+0x140) [0x80ace60]
    4: Xorg(InitOutput+0x615) [0x80a2b45]
    5: Xorg(main+0x293) [0x806fbf3]
    6: /lib/tls/libc.so.6(__libc_start_main+0xd0) [0xb7d9ae00]
    7: Xorg(FontFileCompleteXLFD+0x91) [0x806f341]
    HELP please!!.
    Regards.

    Ok, i installed hwd and create in /etc/X11 the file xorg.conf.hwd
    Now....
    [jack@nube ~]$ sudo X -configure
    X Window System Version 7.0.0
    Release Date: 21 December 2005
    X Protocol Version 11, Revision 0, Release 7.0
    Build Operating System:Linux 2.6.16-ARCH i686
    Current Operating System: Linux nube 2.6.16-ARCH #1 SMP PREEMPT Tue Jun 6 08:33:18 UTC 2006 i686
    Build Date: 04 May 2006
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 11 21:21:45 2006
    List of video drivers:
    voodoo
    apm
    ark
    radeon
    r128
    ati
    atimisc
    chips
    cirrus
    dummy
    vmware
    glint
    i128
    i740
    i810
    imstt
    mga
    neomagic
    newport
    nv
    rendition
    s3
    s3virge
    savage
    siliconmotion
    sis
    sisusb
    tdfx
    trident
    tseng
    via
    v4l
    fglrx
    fbdev
    vesa
    vga
    *** If unresolved symbols were reported above, they might not
    *** be the reason for the server aborting.
    Backtrace:
    0: X(xf86SigHandler+0x88) [0x80ba6a8]
    1: [0xffffe420]
    2: /usr/lib/xorg/modules/drivers/fglrx_drv.so(R200Probe+0x124) [0xb7304bd4]
    3: X(DoConfigure+0x140) [0x80ace60]
    4: X(InitOutput+0x615) [0x80a2b45]
    5: X(main+0x293) [0x806fbf3]
    6: /lib/tls/libc.so.6(__libc_start_main+0xd0) [0xb7da1e00]
    7: X(FontFileCompleteXLFD+0x91) [0x806f341]
    Fatal server error:
    Caught signal 11. Server aborting
    [jack@nube ~]$ aticonfig --initial --input=/etc/X11/xorg.conf
    Warning: Could not find configuration file
    Please copy configuration file template to /etc/X11
    What's happening.... :?:  :?:  :?:

Maybe you are looking for

  • Check printing - signature print on check??

    I was wonderng if anyone here has any advise on how to print a check with signature on a check. Our company is looking at a printer that will put the signature on the check but the company says we would have to supply on the form a "font call functio

  • What exactly are these parts that they replaced?

    Okay, so I just got my MacBook about 20 minutes ago from a main logic board replacement. Only, it says all these other things that were replaced as well. Can someone tell me WHAT they are? SVC, Bezel, M42, PCB, 2.0GHZ DC, SMS/KIONI, Heatsink Any idea

  • How can I get redeem code for free upgrade for OS X Lion

    I had register for serial No: of Mac Pro already but not get redeem code for free upgrade OS X Lion. How can I get the redeem code? Best regards, Noiloso

  • VoiceOver, supports tagged PDFs?

    I just tried out my iPad with VoiceOver and the new Adobe Reader for iOS v 10.5.0. It reads out loud the text of a PDF nicely. Subsequently I tested a PDF, created with InDesign CS5, with portions of the text tagged so that the text should not read o

  • Security Flaw on iPhone???

    Critical iPhone security flaw found Fortify Software, a security firm, has uncovered a critical security flaw in the Apple iPhone which could lead to phishing attacks. Because the iPhone only displays the first few characters of a URL in its Safari w