Xorg.conf resolution error resolution wont set.

hello i seem to be having troubles with my xorg.conf file.
Im trying to set my resolution
which is
1680x1050
here is the link to the exact monitor im using
http://www.amazon.com/Samsung-SyncMaste … B0013PSOT0
here is a paste bin of my xorg.conf output
http://pastebin.ca/1587420
My graphics card is a
Nvidia Corperation NV28GL (Quadro 980 XGL) (rev a1)
I got that from lspci | grep VGA
thanks for the help appreciate it.
And i also ran Xorg -config and nvidia-xconfig
not sure why i did not fix anything.
Isnt the configuration supposed to preconfigure the monitor for you?
Last edited by undergroundx (2009-10-01 08:21:24)

That doesnt make any sense i have Nvidia installed. I even asked in another post on which to install
This one here
http://bbs.archlinux.org/viewtopic.php?id=81087
and also
http://bbs.archlinux.org/viewtopic.php?id=81082
And when i did nvidia the first install around everything worked?
Not sure what else to do.
Here are my monitor specs
http://www.amazon.com/Samsung-SyncMaste … B0013PSOT0

Similar Messages

Xorg.conf nVidia ION resolution

Sorry for my English.
I have this board: ASUS AT5IONT-I, Atom D525, ION2, PCI-E 4X, 2xDDR3 SODIMM, Gbit LAN,E-sata, USB3.0, DVI, HDMI, Fanless, Heatpipe, Mini-ITX.
And, trying to make HTPC.
I install Arch with openbox, but the problem is with video resolution.
I use my 32PFL9606H Philips TV 32''.
I set proper 1920x1080 resolution is xorg.conf but "xdpyinfo | grep dimensions" reports: "dimensions: 1280x800 pixels (338x211 millimeters)"
here is my xorg.conf:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 275.09.07 ([email protected]) Wed Jun 8 16:05:05 PDT 2011
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 275.09.07 ([email protected]) Wed Jun 8 16:05:17 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Philips FTV"
HorizSync 50.0 - 60.0
VertRefresh 50.0
Option "ExactModeTimingsDVI" "true"
Option "UseEDID" "false"
Option "DPMS"
Option "ModeDebug" "true"
ModeLine "1920x1080@50p" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "ION"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Modes "1920x1080@50p"
Depth 24
EndSubSection
EndSection
PS: I deleted /var/log/Xorg.0.log file, but after reboot it is not recreated. Why? And remember that it said something like:
"[ 185.106] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 185.106] (==) NVIDIA(0): will be used as the requested mode.
although I was set mode to 1920x1080
Last edited by clovenhoof (2011-07-02 09:30:37)

Hi !
Please don't use xorg.conf, edit the files inside /etc/X11/xorg.conf.d/ instead.
I also have an ION board and have working HDMI connection with audio at 1920x1080 using the below configuration. Remove your xorg.conf and then edit these files:
/etc/X11/xorg.conf.d/10-monitor.conf
Section "Monitor"
Identifier "Monitor0"
Option "ExactModeTimingsDVI" "True"
HorizSync 14-70
VertRefresh 48-62
Modeline "1920x1080-TV" 148.35 1920 2008 2152 2300 1080 1084 1089 1125
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Monitor0"
Device "Default nvidia Device"
SubSection "Display"
Depth 24
Modes "1920x1080-TV"
EndSubSection
EndSection
/etc/X11/xorg.conf.d/20-nvidia.conf
Section "Device"
Identifier "Default nvidia Device"
Driver "nvidia"
Option "NoLogo" "True"
Option "ModeValidation" "NoEdidModes"
Option "UseEdidDpi" "False"
Option "DPI" "100 x 100"
EndSection
Please note that the above Modeline works on my TV (a 22'' low cost brand one) but I cannot guarantee it will work on yours.
Try that first, then if it doesn't work, try to generate one using the cvt command, and replace the Modeline:
cvt 1920 1080
it should output something like this:
# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
If this method doesn't work either, try the method explained here (which is the one I've first used to find the right Modeline). Its tricky method, and requires a bit of work and lot of patience ... just don't give up
Finally, a little bonus . To have working HDMI sound, I have to put these lines in /etc/asound.conf:
/etc/asound.conf
pcm.!default {
type hw
card 0
device 3
Again, you may need to change the device index in your case. You can list alsa devices using aplay -l command:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 0/1
Subdevice #0: subdevice #0

Xorg.conf ... alternative ?

May be this sounds weird but,... is there any alternative to using xorg.conf ?
Why I'm asking this is that I examined my fedora 9 ( I have dual boot machine) xorg.conf, wich has nothing about the screen or modes and resolutions...
same is ubuntu ... they don't have these information in xorg.conf, however, they manage to set screen resolution right, but with arch I have to it manually ... I will probably have to install pardus again to copy the information I need from its xorg.conf..
I'm really curious to know how they do this ?

Autodetection works fine here too with the ordinary xorg and nvidia driver packages from [extra] and has done for some time.
Section "Device"
Identifier "NVIDIA GeForce 8500 GT"
Driver "nvidia"
BusID "PCI:2:0:0"
Option "BackingStore" "True"
Option "UseDisplayDevice" "DFP"
Option "ConnectToAcpid" "False"
Option "TripleBuffer" "True"
Option "DynamicTwinView" "False"
Option "UseEdidDpi" "False"
Option "DPI" "96 x 96"
Option "RandRRotation" "True"
EndSection
Section "Monitor"
Identifier "P223W"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA GeForce 8500 GT"
Monitor "P223W"
DefaultDepth 24
EndSection
I've always thought that the easiest way to find out the horizontal and vertical sync rates for a monitor is to look in the manual , though running xrandr without any options should get a list of available modes and vertical refresh rates.

[solved] [xorgserver 1.6.1] and the minimalist xorg.conf

Hello new xorgserver users
According to the recent xorgserver upgrade to 1.6.1 I've got blackscreen eachtime I started X. The only way to solve that problem (I'm driving a nvidia desktop) was to replace nvidia driver with xf86-video-nv and no use xorg.conf anymore (otherwise X crashes).
But ctrl+alt+backspace miss me
And I try to use a minimal xorg.conf with the only three lines :
Section "ServerFlags"
Option "DontZap" "false"
EndSection
X crashes on start, my Xorg.0.log :
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux archibald 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 19 15:27:19 2009
(==) Using config file: "/etc/X11/xorg.conf"
Parse error on line 2 of section ServerFlags in file /etc/X11/xorg.conf
Unexpected EOF. Missing EndSection keyword?
(EE) Problem parsing the config file
(EE) Error parsing the config file
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
some archers use this minimal xorg.conf. Why can't I ?
Last edited by frenchy (2009-04-19 15:51:35)

Hy wonder
The wiki says "ServerFlags"...
Anyway, the ServerLayout give me (xorg.0.log) :
Parse error on line 2 of section ServerLayout in file /etc/X11/xorg.conf
Unexpected EOF. Missing EndSection keyword?
(EE) Problem parsing the config file
(EE) Error parsing the config file

Xorg.conf can't set resolution right everything is blurry

i just switched from CRT to LCD and it looks really bad.
DELL 1907FP
I've set xorg.conf according to the monitor specifications
resolution is set to monitor's native resolution and the display size is set
to the one specified in the monitor manual.
http://www.vladuz976.com/aboutdell.html
this is my xorg.conf
http://www.rafb.net/paste/results/NWpuq274.html
The fonts in all windows and the resolution look really bad. everything seems to be a bit blurry in general.
Did i set something wrong in xorg.conf?
what should the DPI be?
vladuz@box:/etc/X11$ xdpyinfo | grep resolution
resolution: 85x86 dots per inch

the picture looks a little better now. I set the vertical range from a range to a
specific value (75.0), looks better now.
but i get
xdpyinfo | grep resolution gives 85x86 dots per inch
isn't that a little low for a 19" 1280x1024 with display size of 380mm 300mm?

[SOLVED] Virtual screen resolution in xorg.conf being ignored

I'm trying to configure a dual monitor set up but xrandr is telling me the max screen size is 1600x1600. I have already enterd a virtual resolution in xorg.conf.
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 2832 1050
EndSubSection
EndSection
When I first installed Arch I was using the radeon drivers. I had no problem configuring my monitors the way I wanted. Now I'm using catalyst and getting errors.
Am I just doing something wrong?
Last edited by thetoxikavenger (2010-06-06 15:58:18)

I didn't really fix the issue with xrandr, but I did manage to get my dual monitors to work with Xinerama.

A single screen resolution in xorg.conf, YET X11 still startups wrong

Hi. There's something that has been bugging me for a while. When I boot the first time my thinkpad SL500, usually (95% of the cases) X sets the resolution to 1024x768. Yet the ONLY screen res available in xorg.conf is 1280 x 800. In order to get to 1280x 800 I init 4 && init 5 every time. Why is this and how to fix it?
xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "glx"
Load "dri"
Load "record"
Load "dbe"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "evdev"
Option "XKbLayout" "de"
Option "XkbVariant" "nodeadkeys"
Option "XkbModel" "pc105"
Option "XkbRules" "xorg"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "SendCoreEvents" "true"
Option "VertEdgeScroll" "on"
Option "HorizEdgeScroll" "on"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Modeline "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841
Modeline "1280x800" 104.35 1280 1360 1496 1712 800 801 804 835
Modeline "1280x800" 88.68 1280 1352 1488 1696 800 801 804 830
Gamma 0.70 0.70 0.70 # created by KGamma
EndSection
Section "Device"
Identifier "Intel X4500MHD"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "DRI" "true"
Option "AccelMethod" "uxa"
Option "MigrationHeuristic" "greedy"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 24
Modes "1280x800_60.00"
Viewport 0 0
EndSubSection
EndSection
And /var/log/Xorg.0.log (non-relevant stuff stripped, shows only (WW) or (EE) and related):
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux evolution 2.6.31-ARCH #1 SMP PREEMPT Fri Oct 23 10:03:24 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(EE) Keyboard0: No device specified.
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for "Keyboard0"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event11"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.75 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (40.8 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.75 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (40.8 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.75 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (40.8 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.75 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (40.8 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
As you can see, there's also a problem with the keyboard. How to get it working? Currently the keyboard layout is set via my DM.
Thanks.
Last edited by Flavious (2009-10-26 08:30:48)

As I understand it your xorg.conf file needs fixing: you have 3 modelines:
Modeline "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841
Modeline "1280x800" 104.35 1280 1360 1496 1712 800 801 804 835
Modeline "1280x800" 88.68 1280 1352 1488 1696 800 801 804 830
in the Monitor section. Two of them have the same name, and in the in the Display section you are referring to a fourth mode "1280x800_60.00" that is never defined before.
Instead find out the correct mode from you monitor specs, then compute its modeline via cvt, then put that modeline into the Monitor section and refer to it in the display section.

Xorg.conf: can't configure resolution lower than 1152x864

Hi,
I just installed Arch (base system + X11 + XFCE + handful of apps) on five computers in our public library. One of the machines has an ATI graphic card:
[biblio@mediatheque1:~] $ lspci | grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
Every machine has a 17'' flatscreen monitor. Usually, I configure xorg.conf to use a resolution of 1024x768. Some of the users here are older and often visually impaired, and I generally avoid using resolutions higher than this on this type of monitor. But I can't seem to configure it on my ATI card. Ah, yes: I'm using the open source xf86-video-ati driver. And here's the relevant bits from xorg.conf:
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1152x864"
EndSubSection
EndSection
When I specify 1024x768 and restart X, the resolution won't change. So I leave it at that, since when I specify nothing, it looks like it want to default to something even higher, my guess is 1280x1024, which is barely legible on a 17'' monitor.
I had a similar problem on the other machines, using recent Intel cards. I found a workaround, in that I replaced the recent xf86-video-intel drivers by the older xf86-video-i810 driver. Only the latter seemed to accept the 1024x768 resolution.
Any suggestions for this?

I'll answer this myself. After leafing through my logfiles, I found the following solution. Add this line to the Display SubSection:
Virtual 1024 768
Last edited by kikinovak (2008-04-15 08:25:27)

Error NtpClient was unable to set a manual peer. DNS resolution error When using IP address.

Hya,
We have been migarting to some new DCs. one of the new DCs now has all the master roles call it DC01.
when I try and sync/setup NTP on this server as the the authoritive NTP in the doamin I get:
NtpClient was unable to set a manual peer to use as a time source because of DNS resolution error on '”10.*.*.*,0x1”'. NtpClient will try again in 15 minutes and double the reattempt interval thereafter. The error was: No such host is known. (0x80072AF9)
I am using the following commands to set NTP up on the server.
>net stop w32time
>w32tm /config /syncfromflags:manual /manualpeerlist:"10.*.*.*,0x1"
>w32tm /config /reliable:yes
>net start w32time.
Is anyone aware of what the issue could be?
Ps one of the old dc can still sync to this site manually if tried.
cheers Mike

Hi,
First make sure your DNS is working properly, then please try this article below:
Event ID 134 — Manual Time Source Acquisition
http://technet.microsoft.com/en-us/library/cc756393(v=ws.10).aspx
Hope this helps.

Xorg defaults to wrong resolution[SOLVED]

Hey All,
I just reinstalled Arch after a 6 month hiatus, and I'm having a bit of trouble with my Xorg.conf.
I have a 1440x900 resolution laptop, but X starts at 1024x768. I have a Nvidia Geforce go 6150. I'm using the Nvidia driver. Here are the pertinent parts of xorg.conf:
I feel like I don't need 90% of this crap. I added the first ModeLine entry myself, the rest were autogenerated. I don't really know what those strings of numbers are, I just stole them from another post.
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
ModeLine "1440X900" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
I added the 1440x900 parts by hand.
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Am I just not entering these options with the right syntax or something?
Edit:
And here's my log:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux Hal 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 22 11:03:50 UTC 2009 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 8 20:19:00 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "USB Mouse"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:5:0) nVidia Corporation C51 [Geforce 6150 Go] rev 162, Mem @ 0xb2000000/0, 0xc0000000/0, 0xb1000000/0, BIOS @ 0x????????/131072
(--) PCI: (0@0:10:3) nVidia Corporation MCP51 PMU rev 163, Mem @ 0xb0040000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.29 Thu Feb 5 00:14:00 PST 2009
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 180.29 Wed Feb 4 23:50:44 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 00@00:05:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce Go 6150 (C51) at PCI:0:5:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.51.28.53.15
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce Go 6150 at PCI:0:5:0:
(--) NVIDIA(0): LPL (DFP-0)
(--) NVIDIA(0): LPL (DFP-0): 310.0 MHz maximum pixel clock
(--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): "800x600"
(II) NVIDIA(0): "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (70, 84); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms" "true"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(WW) Option "XkbVariant" requires an string value
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "IMPS/2"
(**) USB Mouse: Device: "/dev/input/mice"
(**) USB Mouse: Protocol: "IMPS/2"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) USB Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "5"
(==) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) USB Mouse: ZAxisMapping: buttons 4 and 5
(**) USB Mouse: Buttons: 9
(**) USB Mouse: Sensitivity: 1
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (USB Mouse)
(II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
(II) USB Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/Type1, removing from list!
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Video Bus
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed
Last edited by Joe_Arch (2009-03-08 23:47:32)

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
Default depth is 24, but the Depth 24 section doesn't include 1440x900
Bob

Can't properly set up xorg.conf or 10-monitor.conf

Hi.
I would like to ask for Your help. I need someone with greater knowledge over Arch than i have. I have problem with either xorg.conf or 10-monitor.conf. As a matter of fact, now xorg.conf is deprecated so more important is 10-monitor conf.
I have nvidia GTX260 card with newest nvidia drivers. I have 2 DVI's on this card, for an exmaple: DVI-0 nad DVI-1. I would like to use them both using dvi-to-hdmi connector on each of them in order to use my 27 LCD monitor and 40 TV, both with hdmi cable plugged into dvi-hdmi connector and to my graphic card.
I can't solve my problem. Don't know what to do in order to having both screen working. If my 27 inch LCD monitor is connected by DVI-DSUB connector, i have signal on screen. If i plug it by dvi-hdmi connector, than i have screen, singal, picture during boot, but GUI won't load, it stays on "running user interface" or something similar. It is because of my settings in 10-monitor.conf. Here is my setup of 10-monitor.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.20 (buildmeister@swio-display-x64-rhel04-06) Wed Oct 30 18:38:00 PDT 2013
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "DVI-D-1"
VendorName "HP"
ModelName "Hp2228H"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "ignore" "true"
Option "DPMS"
Option "ignore" "true"
EndSection
Section "Monitor"
Identifier "DVI-D-0"
Option "ignore" "true"
EndSection
Section "Monitor"
Identifier "Unknown-0"
Option "ignore" "true"
EndSection
Section "Monitor"
Identifier "unknown-1"
VendorName "LG"
ModelName "LG Electronics 2D FHD LG TV 27MA73D-PZ"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
Option "Enable" "true"
EndSection
Section "Monitor"
Identifier "TV-0"
Option "ignore" "true"
EndSection
#Section "Monitor"
# Identifier "Monitor0"
# VendorName "Unknown"
# ModelName "Unknown"
# HorizSync 28.0 - 33.0
# VertRefresh 43.0-72.0
# Option "DPMS"
#EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "TripleBuffer" "1"
Option "ConnedtedMonitor" "DFP"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
As you can see, there are few section named monitor because Arch detects with nvidia drivers, that i have few screens attached, while i haven't. If i change monitor sections than i could have random switching off signal/screen, and either can have pictrure or don't at all, wither with good 19x12 resolution, or changed for a different, streched to right and i can't log in, and change it eithere.
So, i would like to have what i discribed on top. Could somebody point me in good direction? I tried to generate xorg.conf using nvdia-xcofig, than i applied it to 10-monitor.conf but after reboot i got stuck at "running user interface" or gui, there was no KDE greeting login screen - in my opinion because 10-monitor.conf can't detect that screen is attached by dvi-hdmi connector (detect ok with dvi-dsub and my setting of 10-monitor.conf above). So what to do in order to Arch detects dvi-hdmi connector and detects that i have screen in order to being found and in order to log in into login screen?
When i renamed 10-monitor.conf to 10-monitor.conf.bak and rebooted, i get past "running user interface" or logins screen, i have purple-blue kde greeting and could log in but resolution was stretched on right side and i have only "left side" of screen, so i didn't see login "propmt", or login window, and couldn't log in. Tried to kill x and resuming kdm.service but it won't work. Don't see login window on blue-purple loging screen.
I would like to get past this, would like to use dvi-hdmi connector on my 27 LCD monitor, and being able to use the same dvi-hdmi connector for my 40 TV and use them both. Could somebody help me? What do change in 10-monitor.conf, what to add, what to remove? I'm using now only 27 LCD monitor trough dvi-dsub because i can log into login window because it is in the center of the screen, not stretched to righ on dvi-hdmi connector.
It is not fault of the connectors, i tried on Windows and it Works. Want do have it on Arch because i dont use Windows very often.
Help [:|]

Heh, i found something so stupid about Arch that i can't believe it. In fact, i'm not able to change it.
I had two screen connected to my new graphic card, i moved from GTX260 to GTX660. One flat panel, LG 27 inch, was connected troug one of the DVI (DVI-I-1) and 40 TV was connected trough second DVI (DVI-D-0). What i found? Well, as a matter of fact, this new graphic has booting sequence order regarding working outs during boot. On HDMI out and on DVI-I-1 when booting there is signal and screen. On DVI-D-0 during booting sequence there is no singal, singnal comes up at login prompt of Windows or Arch. Ok, can live with that.
There is one that i can't. If i want to have working setup of my 27 + 40 flat panels, i have to have 27 connected trough hdmi out, 40 trough something other. I'm not able to have 27 connected to DVI-I-1 and 40 TV to DVI-D-0 because during booting sequence, when there is low resolution, i have screen and singal on 27 flat panel, but when there should come up kde welcome login screen, i don't have it. It stays at terminal, when i see info "sterting upser graphic mode". That's strange! The only way to have booting sequence on 27, and also singal/screen after booting sequence of 27 is to have connected 27 flat panel to hdmi out, not DVI-I-1! Why? Don't know but Arch doesen't want to work that way, no matter what i put in 10-monitor.conf. Tried the same on Windows, no matter which out is being used (hdmi or DVI-I-1), during booting sequence there is singal/screen/picture and after it i can normally log into Windows. In case of Arch, i can't.
Don't know. I would show my 10-monitor.conf:
nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 334.21 (buildmeister@swio-display-x64-rhel04-13) Thu Feb 27 14:33:33 PST 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG Electronics 2D FHD LG TV"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 660"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-3"
Option "metamodes" "HDMI-0: 1920x1080 +0+0, DVI-D-0: 1920x1080 +0+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I wan't to have both flat panels on DVI outs because i need hdmi for something other. Is there a way to solve it? Strange is that with provided resolution, vertical and horizontal frequencies, on hdmi out i can boot, i can log into Arch (while my other screen is being found, and also i see picture on login screen) but when i use both of DVI outs, i see booting sequences, and than Arch informs me that has started graphic user mode...but it stays at this black screen. What's more strange is that if i delete 10-monitor.conf, connect my 27 LCD to DVI-D-0, and TV to DVI-I-1, than i see booting on Toshiba 40 TV, don't see it on LG 27, after log in i can set proper resoluton for 27 LG, have both screen working, but if i save this settings in 10-monitor.conf, after reboot...the same thing, stays at message that Arch started graphical user mode.
Don't know what's going on. Can somebody check my xorg? Point me? Maybe xinerama is at fault? I want my LG 27 to be cloned on 40 TV.
In big shortcut: during boot on DVI-I-1 i have signal, can't log into gui mode, stays at mentioned screen with info that it started graphic user mode. What to do, or what to put into 10-monitor.conf?
Last edited by firekage (2014-03-09 00:54:45)

Set permanent monitor refresh rate without xorg.conf

Hi everyone,
Came back to archlinux, made a clean install with gnome 3. Found out that my GDM and Gnome monitor refresh rate is wrong. For GDM I solved it by adding xrandr -s 1024x768 -r 85 to the gdm init script. Maybe it's ugly, but at least working. I've got no xorg.conf and I don't want to create it only because of this problem. Using GUI screen settings in System preferences I managed only to set permanently correct resolution (1024x768) but the refresh rate cannot be changed there, so every time I boot now I have correct resolution and refresh rate for GDM, but after login I have 1024x768@60 only, so I have to manually issue 'xrandr -r 85' every time I login. Can I fix it without creating xorg.conf file under /etc/X11? What I already tried was creating the config file under /etc/X11/xorg.conf.d/ and set proper resolution and refresh rate there, but it didn't help. If someone has advice or idea, i will be very grateful. Thanks a lot in advance.

I think you need to specify the values from the manufacturer's website.
Here's my /etc/X11/xorg.conf.d/10-monitor.conf:
Section "Monitor"
Identifier "Monitor0"
VendorName "DELL"
ModelName "U2311H"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nouveau"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
I probably don't need to specify "Driver" with open-source drivers, but it's easier to just replace it with "nvidia", since I sometimes switch to the proprietary ones.
$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 4096 x 4096
VGA-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm
1920x1080 60.0*+
1680x1050 60.0
1680x945 60.0
1400x1050 74.9 60.0
1600x900 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x960 60.0
1366x768 60.0
1360x768 60.0
1280x800 74.9 59.8
1152x864 75.0
1280x768 74.9 59.9
1024x768 75.1 70.1 60.0
1024x576 60.0
800x600 72.2 75.0 60.3 56.2
848x480 60.0
640x480 72.8 75.0 60.0
720x400 70.1

Link Resolution Error

Hello Linux Guru's
I am new to linux. I accidently set my screen resolution to 1600 X {some number} - which is out of range from my monitor. Now I am unable boot in linux any more. Any suggestions of how i can revert the setting, so I start using/learning linux again.
Thank you for you help.

When you're confident the machine has finished booting, hit ctrl-alt-F1
That should get you a text login.
If you have xconfig (http://rpmfind.net/linux/rpm2html/search.php?query=xconfig) installed, use that to configure xwindows. It's a handy tool :)
If you don't have xconfig then try the following:
su -
mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old
X -configure
cp xorg.conf /etc/X11/xorg.conf
shutdown -r now
That should give you a fresh hardware-probed xorg.conf to work with and should reboot back to the X display that you were hoping to see.
~Jer

Ejb ref resolution error

Dear all,
I try to set up a simple ejb environment. I managed to run the converter example from the JEE tutorial bundle in the NetBeans / Glassfish environment.
Then I tried to write a standalone java client. The code consists in essential of the statements
Context ctx = new InitialContext();
ctx.lookup("converter.ejb.Converter");Unfortunately, running this program from a windows command line by the "java" command (plus some classpath settings) results in:
NamingException: ejb ref resolution error for remote business interface converter.ejb.ConverterThe jndi entries of the app server are
jndi root
|
|-- converter.ejb.Converter#converter.ejb.Converter
|-- converter.ejb.Converter__3_x_Internal_RemoteBusinessHome__
|
|--ejb
      |-- converter.ejb.Converter All environment settings are the standard ones.
Has anybody an idea, what the problem could be ? Thank you very much for your help.
Ralph

Hi,
thanks for your interest. The client code is
// file ConverterClient
package ejb.clients;
import javax.naming.*;
import java.util.*;
public class ConverterClient
public static void main(String[] args)
    try
      Context ctx = new InitialContext();
      ctx.lookup("converter.ejb.Converter");
      Enumeration e = ctx.list("");
      while (e.hasMoreElements())
        System.out.println(e.nextElement());
    catch(NamingException ex)
      ex.printStackTrace();
}The interface:
// file Converter
package converter.ejb;
import java.math.BigDecimal;
import javax.ejb.Remote;
@Remote
public interface Converter {
    public BigDecimal dollarToYen(BigDecimal dollars);
    public BigDecimal yenToEuro(BigDecimal yen);
}The bean code is
// file ConverterBean
package converter.ejb;
import java.math.BigDecimal;
import javax.ejb.Stateless;
@Stateless
public class ConverterBean implements converter.ejb.Converter {
    private BigDecimal euroRate = new BigDecimal("0.0070");
    private BigDecimal yenRate = new BigDecimal("112.58");
    public BigDecimal dollarToYen(BigDecimal dollars) {
        BigDecimal result = dollars.multiply(yenRate);
        return result.setScale(2, BigDecimal.ROUND_UP);
    public BigDecimal yenToEuro(BigDecimal yen) {
        BigDecimal result = yen.multiply(euroRate);
        return result.setScale(2, BigDecimal.ROUND_UP);
}It's been deployed successfully with NetBeans on Glassfish app server.
The commands for compiling and running the client. "c:\java\JEE" is the installation dir for jee.
c:\java\programs\src javac -d .. -cp c:\java\JEE\lib\javaee.jar;c:\java\JEE\lib\appserv-rt.jar   ConverterClient.java
c:\java\programs java -cp c:\java\JEE\lib\javaee.jar;c:\java\JEE\lib\appserv-rt.jar;. ejb.clients.ConverterClient

[CLOSED] Unable to set keyboard layout from /etc/X11/xorg.conf.d/

This is my /etc/X11/xorg.conf.d/10-keyboard.conf:
Section "InputClass"
Identifier "keyboard-layout"
MatchIsKeyboard "on"
Option "XkbLayout" "cz,us"
Option "XkbOptions" "grp:alt_shift_toggle"
EndSection
I wrote the according to the wiki recommendations, but it doesn't work. Issuing setxkbmap -layout "cz,us" -option "grp:alt_shift_toggle" automatically after logging in serves as a temporary solution, but I'm highly interested in fixing the primary issue. I would greatly appreciate if someone helped my find the error in my config file and/or posted their way to change the xorg keyboard layout in order to compare it with my way and find the error. Also note that I'm using Awesome WM so desktop environment ways of setting the keyboard layout aren't applicable in my case.
Last edited by C5OK5Y (2012-12-28 15:01:25)

@chris_l: Thank you for your /etc/X11/xorg.conf.d/01-keyboard-layout.conf.
I have found out that the actual problem isn't in the configuration file but in the actual keyboard (more accurately xorg) - the keyboard gets incorrectly identified and xorg seems to think that it's a pointer (mouse). When I connect a different keyboard, the layout gets set correctly, xorg just isn't setting the keyboard layout correctly to the keyboard that I use. I have filed a bug report so this thread can be considered closed.
Last edited by C5OK5Y (2012-12-29 12:58:44)

Xorg.conf resolution error resolution wont set.

Similar Messages

Maybe you are looking for