Xorg.conf trouble
List of my xorg.conf:
Section "Device"
Identifier "AMD LX800 onboard video card"
Driver "geode"
BusID "PCI:0:1:1"
Option "FlatPanel"
Option "NoCrtEnable"
Option "Accel"
Option "ShadowFB"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "AMD LX800 onboard video card"
Monitor "Generic Monitor"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
EndSection
output for startx:
AmdPciProbe: Probing for supported devices!
Unable to open /dev/cpu/0/msr: 2
(EE) GEODE(0): GPIO pins are in serial mode. Assuming no DDX
Fatal server error:
AddScreen/ScreenInit failed for driver 0
Last edited by XaverOz (2012-03-14 08:48:15)
t1nk3r3r wrote:
1. I wasn't aware there was an "amd" driver
2. BusID matches output of "lspci | grep VGA" ?
3. Is there a "/etc/X11/xorg.conf.d/20-*.conf" ? xorg.conf not needed unless you mean to use fglrx for ATI/AMD.
1. sorry there is error, edit on "geode"
2. lspci | grep VGA
00:01.1 VGA compatible controller: Advanced Micro Devices [AMD] Geode LX Video
3. ls /etc/X11/xorg.conf.d/
10-evdev.conf
10-synaptics.conf
50-vmmouse.conf
10-quirks.conf
50-joystick.conf
Last edited by XaverOz (2012-03-14 08:53:22)
Similar Messages
-
[SOLVED]xpra + winswitch - best practice due to /etc/X11/xorg.conf.d/*
Running xpra causes some headaches.
The application builds fine and installs just perfectly, the troubles comes from the default Xorg configuration is no longer stored in /etc/X11/xorg.conf, it's now stored and read from numerous files under /etc/X11/xorg.conf.d/ where just so happen to be my 5-nvidia.conf.
Starting xpra via:
xpra start :100
Causes:
X.Org X Server 1.14.3
Release Date: 2013-09-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.11.0-1-ARCH x86_64
Current Operating System: Linux archie 3.11.2-1-ARCH #1 SMP PREEMPT Fri Sep 27 07:35:36 CEST 2013 x86_64
Kernel command line: root=/dev/sda1 rw initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Build Date: 13 September 2013 01:28:59PM
Current version of pixman: 0.30.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/home/torxed/.xpra/Xorg.:100.log", Time: Thu Oct 3 19:56:30 2013
(++) Using config file: "/etc/xpra/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
setversion 1.4 failed
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
(EE)
Fatal server error:
(EE) xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/home/torxed/.xpra/Xorg.:100.log" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
2013-10-03 19:56:30,893
2013-10-03 19:56:30,893 Xvfb command has terminated! xpra cannot continue
2013-10-03 19:56:30,894
2013-10-03 19:56:30,895 removing socket /home/torxed/.xpra/archie-100
tl;dr: 5-nvidia.conf is trying to get loaded after xf86-video-dummy is loaded (which is the default for xpra).
Now to the question: What's the best practice because there's no information about this issue, and i can't be the only one who's run in to this since the xorg.conf was removed. At the moment I move all my nvidia configs out of the way, start xpra and move them back in. This works for the better part as long as i execute xpra with my own scripts.
But is there a better way (which doesn't perhaps include recreating xorg.conf since that appears to be something you should walk away from)?
Last edited by Torxed (2013-10-04 10:29:35)Good thinking! (xpra is basically just screen but for x, or a X11 tunnel via SSH).
After a really quick poking around and remembering that xpra really just uses xorg-server-xvfb and at the very bottom of /etc/xpra/xpra.conf there's a line that says:
xvfb=xpra_Xdummy -dpi 96 -noreset -nolisten tcp +extension GLX +extension RANDR +extension RENDER -logfile ${HOME}/.xpra/Xorg.${DISPLAY}.log -config /etc/xpra/xorg.conf
Appending -configdir appears to be working.
Here are the full steps:
[torxed@archie ~]$ sudo cp -r /etc/X11/xorg.conf.d /etc/xpra/
[torxed@archie ~]$ sudo rm /etc/xpra/xorg.conf.d/*nvidia*
[torxed@archie ~]$ sudo sed -i '$s/$/ -configdir \/etc\/xpra\/xpra.conf.d/' /etc/xpra/xpra.conf
*nvidia* would have to match your graphic-driver-config that would cause xorg-server-xvbf to crash.
I'll update the wiki and put a mention on the package about it because this either has to be standard or well known from the start because it really just breaks the package all together.
Last edited by Torxed (2013-10-04 10:29:09) -
I'm having trouble combining my logitech g5 (2nd version with 2 thumb buttons) and evdev.
Based on some things I've read around the net, I'm under the impression that I can get the buttons (total of 9) to work using evdev as the driver. I have the kernel module loaded and the package (version 1.2.0) is installed. If anyone could take a look at my xorg.conf, I'd appreciate.
Section "Module"
Load "dbe"
Load "speedo"
Load "freetype"
#Load "xtt"
Load "glx"
Load "record"
Load "extmod"
Load "xtrap"
Load "wfb"
Load "bitmap"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/util"
FontPath "/usr/share/fonts/local"
FontPath "/usr/local/share/fonts"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "evdev"
# Option "evBits" "+1"
# Option "keyBits" "~1-255 ~352-511"
# Option "Pass" "3"
Option "Device" "/dev/input/event2"
Option "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "evdev"
# Option "evBits" "+1"
# Option "keyBits" "~1-255 ~352-511"
# Option "Pass" "3"
Option "Device" "/dev/input/event3"
# Option "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "evdev"
# Option "HWHEELRelativeAxisButtons" "7 6"
# Option "HWHEELRelativeAxisButtons" "9 8"
# Option "evBits" "+1-2"
# Option "keyBits" "~272-287"
# Option "relBits" "~0-2 ~6 ~8"
# Option "Pass" "3"
# Option "Name" "Logitech USB Gaming Mouse"
Option "Device" "/dev/input/event1"
Option "CorePointer"
Option "Buttons" "9"
EndSection
Section "Monitor"
Identifier "CPD-G410"
HorizSync 30-107
VertRefresh 48-120
EndSection
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection
Section "Device"
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "GeForce 7600GS"
Card "NVIDIA GeForce"
BusID "PCI:1:0:0"
VideoRam 262144
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
Option "NvAGP" "1"
Option "NoLogo" "1"
#Option "ConnectedMonitor" "DFP"
Option "UseEdidDpi" "true"
#Option "DPI" "96 x 96"
#Option "DPMS" "false"
#Option "UseEvents" "false"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "CPD-G410"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1600x1200" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen0"
InputDevice "Mouse0"
InputDevice "Keyboard0"
InputDevice "Keyboard1"
EndSection
Keyboard0 is my full keyboard, Keyboard1 is a CyberSnipa gaming keyboard, and Mouse0 is the g5. In all 3 cases, I believe the Option/Device lines are necessary (http://wiki.archlinux.org/index.php/Get_All_Mouse_Buttons_Working confirms this). Based on the evdev manpage and some forum posts (arch and gentoo) I've seen, I expected something very simple to work:
Section "InputDevice"
Identifier "G5"
Driver "evdev"
Option "Name" "Logitech USB Gaming Mouse"
Option "HWHEELRelativeAxisButtons" "7 6"
EndSection
It doesn't. The two thumb buttons and scroll tilt do nothing. Adding Option/CorePointer makes the mouse completely nonfunctional, and CoreKeyboard makes the keyboard the same, unless the Option/Device line is there, then it works. But I've still got dead buttons. Do I need anything beyond the evdev module loaded? I've also got psmouse, hid, and usbhid. My goal is to combine this with mousewheel.horizscroll.withnokey.action -> 1 and mousewheel.horizscroll.withnokey.numlines -> 1 in Firefox (courtesy of http://forums.gentoo.org/viewtopic-p-42 … ml#4228484 ) to have scrolling via l/r tilt. I don't need scrolling in other apps. I see only one WW line in the X log, related to acpi, and no EE lines.
If any of you have a logitech g5, particularly the newer version, working with your arch install, I'd appreciate hearing about it.
Thanks!Section "InputDevice"
Identifier "Mouse0"
Driver "evdev"
Option "Device" "/dev/input/by-id/usb-PATEN_USB_HID_Device-event-mouse"
Option "evBits" "+1-2"
Option "keyBits" "~272-287"
Option "relBits" "~0-2 ~6 ~8"
Option "Pass" "3"
Option "SendCoreEvents" "true"
EndSection
Used this for a similiar Labtec mouse for a while and with that I didn't need any further configuration in opera e.g.. The Device option looks as it does because so it doesn't matter in which USB port I plug my mouse, found instructions how to do that on this thread, 23rd post:
http://bbs.archlinux.org/viewtopic.php?id=39981
If you don't want to follow probably there is also the 'by-path' method (not tested y myself). Do 'ls /dev/input/by-path/' and pick the line for your mouse and use that as device.
ATM I even don't use a mouse in my ServerLayout, the mouse does work nevertheless and the extra buttons produce events (tested with xev), but they are not recognized by opera now. Haven't investigated yet how to remedy tat.
Bye, signor_rossi.
EDIT: Probably better use 'SendCoreEvents' instead of 'CorePointer' for mouse and touchpad in the ServerLayout section.
Last edited by signor_rossi (2008-02-22 10:12:39) -
Xorg.conf resolution error resolution wont set.
hello i seem to be having troubles with my xorg.conf file.
Im trying to set my resolution
which is
1680x1050
here is the link to the exact monitor im using
http://www.amazon.com/Samsung-SyncMaste … B0013PSOT0
here is a paste bin of my xorg.conf output
http://pastebin.ca/1587420
My graphics card is a
Nvidia Corperation NV28GL (Quadro 980 XGL) (rev a1)
I got that from lspci | grep VGA
thanks for the help appreciate it.
And i also ran Xorg -config and nvidia-xconfig
not sure why i did not fix anything.
Isnt the configuration supposed to preconfigure the monitor for you?
Last edited by undergroundx (2009-10-01 08:21:24)That doesnt make any sense i have Nvidia installed. I even asked in another post on which to install
This one here
http://bbs.archlinux.org/viewtopic.php?id=81087
and also
http://bbs.archlinux.org/viewtopic.php?id=81082
And when i did nvidia the first install around everything worked?
Not sure what else to do.
Here are my monitor specs
http://www.amazon.com/Samsung-SyncMaste … B0013PSOT0 -
Xorg.conf for IBM thinkpad X31
Could someone post their working xorg.conf for X31 with the new xorg 1.6+
the wiki one does not work.
Thankscan you link it, i cannot find it in wiki
here is my log file with no xorg.conf file
I am not able to see any errors in the last line..but iam not able to get X started
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux myhost 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May 25 10:38:14 2009
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon Mobility M6 LY rev 0, Mem @ 0xe0000000/134217728, 0xc0100000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD Graphics, ATI Radeon Graphics,
ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
ATI Radeon Graphics
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000c0100000
(II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility M6 LY (AGP)" (ChipID = 0x4c59)
(--) RADEON(0): Linear framebuffer at 0x00000000e0000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=16384K, accessible=65536K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 16384 kByte (32 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 1600x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 12000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 14400, sclk: 144.000000, mclk: 144.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=60 min=12000 max=35000; xclk=14400
(II) RADEON(0): Panel ID string: 1024x768
(II) RADEON(0): Panel Size from BIOS: 1024x768
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1024, YRes: 768, DotClock: 65000
HBlank: 320, HOverPlus: 16, HSyncWidth: 136
VBlank: 38, VOverPlus: 2, VSyncWidth: 6
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVDS
DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 1
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
(II) RADEON(0): Added native panel mode: 1024x768
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1024x768
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit e0000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable LVDS
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x04000000
(II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1024,4096)
(II) RADEON(0): Reserved area from (0,1024) to (1024,1026)
(II) RADEON(0): Largest offscreen area available: 1024 x 3070
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x800000
(II) RADEON(0): Will use depth buffer at offset 0xc00000
(II) RADEON(0): Will use 0 kb for textures at offset 0x1000000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 1x
(II) RADEON(0): [agp] Mode 0x1f000201 [AGP 0x8086/0x3340; Card 0x1002/0x4c59 0x1014/0x052f]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xd0000000
(II) RADEON(0): [agp] Ring mapped at 0xb77da000
(II) RADEON(0): [agp] ring read ptr handle = 0xd0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb77d9000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xd0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb64fa000
(II) RADEON(0): [agp] GART texture map handle = 0xd0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb601a000
(II) RADEON(0): [drm] register handle = 0x28020000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xffff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xe3ffe000 is: 0xe3ffe000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xd07fd000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xe3ffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xd07fd000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
5 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00402000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00406000
(II) RADEON(0): Largest offscreen area available: 1024 x 3062
(II) RADEON(0): Detected Radeon Mobility M6, disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable primary dac
disable LVDS
disable LVDS
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xe3ffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xd07fd000
restore common
restore crtc1
restore pll1
set RMX
set LVDS
enable LVDS
disable primary dac
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/radeon_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 270 x 203
(II) config/hal: Adding input device ThinkPad Extra Buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event8"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event7"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) ThinkPad Extra Buttons: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) TPPS/2 IBM TrackPoint: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
disable LVDS
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xffff0000 0xe3ffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x003fffc0
finished PLL2
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf80f1000 at 0xb78db000
(II) RADEON(0): [drm] Closed DRM master.
Last edited by venky80 (2009-05-25 18:45:21) -
hi guys
i'm experiecing some troubles configuring my old vga
this is /etc/X11/xorg.conf.d/20-radeon.conf
Section "Device"
Identifier "ATI Technologies, Inc. Radeon Mobility M6 LY [Radeon Mobility 9000]"
Driver "radeon"
BusID "PCI:1:0:0"
Option "DRI" "on"
Option "AGPMode" "2"
Option "ColorTiling" "on"
Option "DynamicClocks" "on"
Option "EnablePageFlip" "on"
Option "BIOSHotkeys" "on"
EndSection
#Section "Modules"
# Load "dri"
# Load "extmod"
# Load "glx"
# Load "GLcore"
# Load "dbe"
#EndSection
how come that if i uncomment the Modules section, even without loading any of them, X stops starting on startup and produces the error: x" respawning too fast: disabled for 5 minutes
thanks!well.. i passed to KMS following the wiki.
everything's ok if i rename the radeon file in etc/X11/xorg.d/, otherwise i cant get hardware acceleration and X uses the cpu (i know because everything involving graphics becomes awfully slow).
so the question is: do i need to configure the vga anymore?? i use 2d applications only.
one more thing: power saving.
i tried enabling dynamic power saving as described in the wiki, which states that you don't have to add " radeon.dynpm=1" to the kernel parameters if use a kernel release >= 2.6.35.
a few lines later, though, it says to run this command (i find it quite unclear):
echo dynpm > /sys/class/drm/card0/device/power_method
i tried, but i don't have that file! instead i've got a folder called "power" with some other stuff in it.
what should i do? please help -
Hi,
I was away for a few days and this morning did a pacman -Suy. One of the things loaded was xorg7. I had some trouble with nvidia and finally got it runing. Unfortunately it's running on my old xorg.conf. If I try the new one, the colors on my wallpaper are all washed out and my fonts etc are weird. I have read and re-read teh Wiki but don't follow. Was the wiki written while xorg7 was still in testing? It seems like soem of the stuff it talks about are already done. Should I continue running on the old xorg.conf and if not, what should I do to get the new one working??
Thanks
JimHere's my xorg.conf (the new one).
Jim
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "xtrap"
Load "record"
Load "dbe"
# Load "dri"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "GS790"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30 - 97
VertRefresh 50 - 180
Option "DPMS" "true"
Option "Twinview"
Option "SecondMonitorHorizSync" "30 - 97"
Option "SecondMonitorVertRefresh" "50 - 160"
Option "MetaModes" "1280x1024,1280x1024"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "nvidia"
# Driver "vesa"
VendorName "nVidia Corporation"
BoardName "NV34 [GeForce FX 5200]"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "GS790"
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Modes "1280x1024" "1024x768" "800x600" "640x480"
Viewport 0 0
Depth 24
EndSubSection
EndSection -
Hi, im new on archlinux and ive installed my core system.
Im having some troubles configuring xorg.conf.
when i run the xorg.conf i just get a black screen with nothing in it, and i get>
The XKEYBOARD keymap compiler (xkbcomp) reports:
> WARNING: type "ONE_LEVEL" has 1 levels, but <RAIT> has 2 symbols
> Ignoring extra symbols
ERRORS from xkbcomp are not fatal to the X server.
Here is my Xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "EPI"
ModelName "AOC D356"
HorizSync 30.0 - 54.0
VertRefresh 50.0 - 120.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "RC410 [Radeon Xpress 200]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
Defaultdepth 24
EndSection
I cant find the problem and yes, ive read the wiki.
The weird thing is that startx run fine.
I really need this PC working.
please help!Hi I have a problem on boot how did you solved it? (description of my problem is here http://bbs.archlinux.org/viewtopic.php?t=19434)
-
[Xorg][Intel GMA 950] Hotplug but Source xorg.conf as Well [SOLVED]
I've been having trouble getting xorg to honour the config file while still having hotplugging enabled. A number of kind souls have told me that I could keep out the input sections and xorg would use the rest, but it doesn't.
Such are my requirements:
(1) I want to have Hotplugging
(2) I want to configure hotplugged devices via their respective FDI files
(3) I want to disable compositing (so I need xorg.conf)
(4) I want to change graphics device options (so I need xorg.conf)
I understand that the laptop's monitor is also considered a hotpluggable device, so I've omitted related entries. The following is what I have:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Option "AIGLX" "false"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/local/share/fonts"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "int10"
Load "vbe"
Load "xtrap"
Load "record"
Load "dbe"
Load "extmod"
Load "freetype"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "AccelMethod" "xaa"
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
If you have a similar use-case then please offer your xorg.conf for me to steal, thanks!
Last edited by schivmeister (2009-05-11 09:54:14)Section "ServerLayout"
Identifier "X.org Configured"
Option "AIGLX" "false"
EndSection
Section "Device"
Identifier "Card0"
Option "AccelMethod" "xaa"
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
should be enough. -
[SOLVED] xorg.conf with 'hwd -xa' on sony viao not working
Hello,
I have a Sony viao VGN-T150P running Arch linux and I can't get my x.org working .
here are some of information I get:
lspci says
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
02:04.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
02:04.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller
02:04.3 Mass storage controller: Texas Instruments PCI7420/7620 Combo CardBus, 1394a-2000 OHCI and SD/MS-Pro Controller
02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 83)
02:0b.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
so then I installed xf86-video-intel,
using that driver with a blank xorg.conf , I get 3 terminal windows and xclock, but my mouse and keyboard don't seem to do anything
here are those errors:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux myhost 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 4 23:44:09 2009
(EE) Unable to locate/open config file
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/0, 0xe0000000/0, I/O @ 0x00001800/0
(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/0, 0xe0080000/0
(==) Matched intel for the autoconfigured driver
New driver is "intel"
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default fbdev Screen 0"
Screen "Builtin Default vesa Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GME
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xE8000000
(--) intel(0): IO registers at addr 0xE0000000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 8000 kB
(II) intel(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238592 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 954364 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
(Cannot allocate memory)
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
(Cannot allocate memory)
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xe0000000
(II) intel(0): [drm] ring buffer = 0xe8000000
(II) intel(0): [drm] mapped front buffer at 0xe9000000, handle = 0xe9000000
(II) intel(0): [drm] mapped back buffer at 0xec000000, handle = 0xec000000
(II) intel(0): [drm] mapped depth buffer at 0xed000000, handle = 0xed000000
(II) intel(0): [drm] mapped classic textures at 0xee000000, handle = 0xee000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 7 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 8 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 9 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00027fff: logical 3D context (32 kB)
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x0000000036307000 physical
(II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x00000000362c8000 physical
(II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x000000003632f000 physical
(II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x00000000362a8000 physical
(II) intel(0): 0x007e9000-0x007e9fff: overlay registers (4 kB, 0x0000000036322000 physical
(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x08000000: end of aperture
(II) intel(0): using SSC reference clock of 66 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(WW) intel(0): Hardware claims pipe A is on while software believes it is off
(WW) intel(0): Hardware claims plane A is on while software believes it is off
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): [drm] dma control initialized, using IRQ 9
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 203
if I use hwd -xa to make an xorg.conf which says this:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "i810"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
and do startx it spits out a bunch of errors:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux myhost 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 5 15:57:56 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/0, 0xe0000000/0, I/O @ 0x00001800/0
(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/0, 0xe0080000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(EE) No devices detected.
Fatal server error:
no screens found
Does anybody else a a VGN-T150P or any of these problems? I'm not very good a writing/decoding xorg.conf files so if anybody could help it would be greatly appreciated
Last edited by jsh33 (2009-02-08 14:52:01)I download xf86-video-fbdev just for fun before I saw your post, I didn't do anything as far as I could see.
I commented these lines out:
FontPath "/usr/share/fonts/Type1"
Load "record"
Load "type1"
B, I didn't install any fonts but now I installed a buch of random fonts:
pacman -S ttf-ms-fonts ttf-cheapskate artwiz-fonts xorg-fonts-75dpi xorg-fonts-100dpi
and did some of what the X.org configuration wiki said:
fc-cache -fv
/usr/bin/fc-cache
/usr/bin/mkfontscale
/usr/bin/mkfontdir
ln -s /usr/share/fonts/encodings/encodings.dir encodings.dir
Then this I changed this:
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "All"
BoardName "All"
EndSection
EDIT, halfway through this post I realized I type in biagio's code wrong, I re-typed it and now my X works!
Thanks Everybody for the help! , here's the working xorg.conf for reference:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
# FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
# Load "type1"
Load "freetype"
# Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1280x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection -
Option "ctrl:nocaps" in /etc/X11/xorg.conf.d/10-evdev.conf ignored
Hi all,
I have a single-user laptop, so I'd like to configure my X keyboard layout and options globally instead of doing it for any WM/DE I might happen to use. And most importantly, the desktop manager (GDM) should already use my layout. So my /etc/X11/xorg.conf.d/10-evdev.conf contains this section:
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbLayout" "de"
Option "XkbVariant" "dvorak"
Option "XkbOptions" "ctrl:nocaps"
EndSection
The result is that I have my German Dvorak layout in GDM and in whatever WM I choose there. However, the ctrl:nocaps option seems to be ignored. In GDM, CapsLock is still CapsLock, not an additional CTRL. Why not?
Here's the Xorg.0.log in case that might shed some light. (Well, it actually only shows that the options seems to be applied to all keyboard devices...)
[ 14.912]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 14.912] X Protocol Version 11, Revision 0
[ 14.912] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 14.912] Current Operating System: Linux thinkpad-t61 3.12.9-1-ARCH #1 SMP PREEMPT Sun Jan 26 09:01:37 CET 2014 x86_64
[ 14.912] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw initrd=../initramfs-linux.img
[ 14.912] Build Date: 09 January 2014 08:47:24AM
[ 14.912]
[ 14.912] Current version of pixman: 0.32.4
[ 14.912] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 14.912] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14.912] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 30 08:06:06 2014
[ 15.046] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.046] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 15.385] (==) No Layout section. Using the first Screen section.
[ 15.385] (==) No screen section available. Using defaults.
[ 15.385] (**) |-->Screen "Default Screen Section" (0)
[ 15.385] (**) | |-->Monitor "<default monitor>"
[ 15.415] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 15.415] (==) Automatically adding devices
[ 15.415] (==) Automatically enabling devices
[ 15.415] (==) Automatically adding GPU devices
[ 15.596] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15.596] Entry deleted from font path.
[ 15.603] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.603] Entry deleted from font path.
[ 15.603] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.604] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.604] Entry deleted from font path.
[ 15.604] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.604] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 15.604] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.604] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15.604] (II) Loader magic: 0x804c80
[ 15.604] (II) Module ABI versions:
[ 15.604] X.Org ANSI C Emulation: 0.4
[ 15.604] X.Org Video Driver: 15.0
[ 15.604] X.Org XInput driver : 20.0
[ 15.604] X.Org Server Extension : 8.0
[ 15.604] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 15.607] (--) PCI:*(0:0:2:0) 8086:2a02:17aa:20b5 rev 12, Mem @ 0xf8100000/1048576, 0xe0000000/268435456, I/O @ 0x00001800/8
[ 15.607] (--) PCI: (0:0:2:1) 8086:2a03:17aa:20b5 rev 12, Mem @ 0xf8200000/1048576
[ 15.607] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.619] Initializing built-in extension Generic Event Extension
[ 15.619] Initializing built-in extension SHAPE
[ 15.619] Initializing built-in extension MIT-SHM
[ 15.619] Initializing built-in extension XInputExtension
[ 15.619] Initializing built-in extension XTEST
[ 15.619] Initializing built-in extension BIG-REQUESTS
[ 15.619] Initializing built-in extension SYNC
[ 15.619] Initializing built-in extension XKEYBOARD
[ 15.619] Initializing built-in extension XC-MISC
[ 15.619] Initializing built-in extension SECURITY
[ 15.619] Initializing built-in extension XINERAMA
[ 15.619] Initializing built-in extension XFIXES
[ 15.619] Initializing built-in extension RENDER
[ 15.619] Initializing built-in extension RANDR
[ 15.619] Initializing built-in extension COMPOSITE
[ 15.619] Initializing built-in extension DAMAGE
[ 15.619] Initializing built-in extension MIT-SCREEN-SAVER
[ 15.619] Initializing built-in extension DOUBLE-BUFFER
[ 15.619] Initializing built-in extension RECORD
[ 15.619] Initializing built-in extension DPMS
[ 15.619] Initializing built-in extension Present
[ 15.619] Initializing built-in extension DRI3
[ 15.619] Initializing built-in extension X-Resource
[ 15.619] Initializing built-in extension XVideo
[ 15.619] Initializing built-in extension XVideo-MotionCompensation
[ 15.619] Initializing built-in extension XFree86-VidModeExtension
[ 15.619] Initializing built-in extension XFree86-DGA
[ 15.619] Initializing built-in extension XFree86-DRI
[ 15.619] Initializing built-in extension DRI2
[ 15.619] (II) "glx" will be loaded by default.
[ 15.619] (II) LoadModule: "dri2"
[ 15.619] (II) Module "dri2" already built-in
[ 15.619] (II) LoadModule: "glamoregl"
[ 15.671] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 15.894] (II) Module glamoregl: vendor="X.Org Foundation"
[ 15.894] compiled for 1.15.0, module version = 0.6.0
[ 15.894] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.894] (II) LoadModule: "glx"
[ 15.894] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.926] (II) Module glx: vendor="X.Org Foundation"
[ 15.926] compiled for 1.15.0, module version = 1.0.0
[ 15.926] ABI class: X.Org Server Extension, version 8.0
[ 15.926] (==) AIGLX enabled
[ 15.926] Loading extension GLX
[ 15.926] (==) Matched intel as autoconfigured driver 0
[ 15.926] (==) Matched intel as autoconfigured driver 1
[ 15.926] (==) Matched modesetting as autoconfigured driver 2
[ 15.926] (==) Matched fbdev as autoconfigured driver 3
[ 15.926] (==) Matched vesa as autoconfigured driver 4
[ 15.926] (==) Assigned the driver to the xf86ConfigLayout
[ 15.926] (II) LoadModule: "intel"
[ 15.926] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 16.103] (II) Module intel: vendor="X.Org Foundation"
[ 16.103] compiled for 1.15.0, module version = 2.21.15
[ 16.103] Module class: X.Org Video Driver
[ 16.103] ABI class: X.Org Video Driver, version 15.0
[ 16.103] (II) LoadModule: "modesetting"
[ 16.112] (WW) Warning, couldn't open module modesetting
[ 16.112] (II) UnloadModule: "modesetting"
[ 16.112] (II) Unloading modesetting
[ 16.112] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 16.112] (II) LoadModule: "fbdev"
[ 16.112] (WW) Warning, couldn't open module fbdev
[ 16.112] (II) UnloadModule: "fbdev"
[ 16.112] (II) Unloading fbdev
[ 16.112] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 16.112] (II) LoadModule: "vesa"
[ 16.112] (WW) Warning, couldn't open module vesa
[ 16.112] (II) UnloadModule: "vesa"
[ 16.112] (II) Unloading vesa
[ 16.112] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 16.112] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 16.114] (++) using VT number 1
[ 16.139] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 16.139] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 16.139] (==) intel(0): RGB weight 888
[ 16.139] (==) intel(0): Default visual is TrueColor
[ 16.139] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 16.139] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1
[ 16.139] (**) intel(0): Framebuffer tiled
[ 16.139] (**) intel(0): Pixmaps tiled
[ 16.139] (**) intel(0): "Tear free" disabled
[ 16.139] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 16.139] (II) intel(0): Output LVDS1 has no monitor section
[ 16.139] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 16.139] (II) intel(0): Output VGA1 has no monitor section
[ 16.140] (II) intel(0): Output DVI1 has no monitor section
[ 16.140] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 0
[ 16.140] (--) intel(0): Output DVI1 using initial mode 1920x1200 on pipe 1
[ 16.140] (==) intel(0): DPI set to (96, 96)
[ 16.140] (II) Loading sub module "dri2"
[ 16.140] (II) LoadModule: "dri2"
[ 16.140] (II) Module "dri2" already built-in
[ 16.140] (==) Depth 24 pixmap format is 32 bpp
[ 16.173] (II) intel(0): SNA initialized with Broadwater (gen4) backend
[ 16.173] (==) intel(0): Backing store enabled
[ 16.173] (==) intel(0): Silken mouse enabled
[ 16.175] (II) intel(0): HW Cursor enabled
[ 16.175] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 16.178] (==) intel(0): DPMS enabled
[ 16.178] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 16.178] (II) intel(0): [DRI2] Setup complete
[ 16.178] (II) intel(0): [DRI2] DRI driver: i965
[ 16.178] (II) intel(0): direct rendering: DRI2 Enabled
[ 16.178] (==) intel(0): hotplug detection: "enabled"
[ 16.178] (--) RandR disabled
[ 16.398] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 16.398] (II) AIGLX: enabled GLX_ARB_create_context
[ 16.398] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 16.398] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 16.398] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 16.398] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 16.398] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 16.398] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 16.398] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 16.398] (II) AIGLX: Loaded and initialized i965
[ 16.398] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 16.410] (II) intel(0): switch to mode [email protected] on pipe 0 using LVDS1, position (0, 0), rotation normal
[ 16.426] (II) intel(0): switch to mode [email protected] on pipe 1 using DVI1, position (0, 0), rotation normal
[ 16.440] (II) intel(0): Setting screen physical size to 508 x 317
[ 16.899] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.899] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.899] (II) LoadModule: "evdev"
[ 16.899] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.928] (II) Module evdev: vendor="X.Org Foundation"
[ 16.928] compiled for 1.15.0, module version = 2.8.2
[ 16.928] Module class: X.Org XInput Driver
[ 16.928] ABI class: X.Org XInput driver, version 20.0
[ 16.928] (II) Using input driver 'evdev' for 'Power Button'
[ 16.928] (**) Power Button: always reports core events
[ 16.928] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 16.928] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.928] (--) evdev: Power Button: Found keys
[ 16.928] (II) evdev: Power Button: Configuring as keyboard
[ 16.928] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 16.928] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.928] (**) Option "xkb_rules" "evdev"
[ 16.928] (**) Option "xkb_model" "pc104"
[ 16.928] (**) Option "xkb_layout" "de"
[ 16.928] (**) Option "xkb_variant" "dvorak"
[ 16.928] (**) Option "xkb_options" "ctrl:nocaps"
[ 16.976] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 16.976] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 16.976] (II) Using input driver 'evdev' for 'Video Bus'
[ 16.976] (**) Video Bus: always reports core events
[ 16.976] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 16.976] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 16.976] (--) evdev: Video Bus: Found keys
[ 16.976] (II) evdev: Video Bus: Configuring as keyboard
[ 16.976] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13/event11"
[ 16.976] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 16.976] (**) Option "xkb_rules" "evdev"
[ 16.976] (**) Option "xkb_model" "pc104"
[ 16.976] (**) Option "xkb_layout" "de"
[ 16.976] (**) Option "xkb_variant" "dvorak"
[ 16.976] (**) Option "xkb_options" "ctrl:nocaps"
[ 16.977] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 16.977] (II) No input driver specified, ignoring this device.
[ 16.977] (II) This device may have been added with another device file.
[ 16.977] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 16.977] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 16.977] (II) Using input driver 'evdev' for 'Sleep Button'
[ 16.977] (**) Sleep Button: always reports core events
[ 16.977] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 16.977] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 16.977] (--) evdev: Sleep Button: Found keys
[ 16.977] (II) evdev: Sleep Button: Configuring as keyboard
[ 16.977] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event2"
[ 16.977] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 16.977] (**) Option "xkb_rules" "evdev"
[ 16.977] (**) Option "xkb_model" "pc104"
[ 16.977] (**) Option "xkb_layout" "de"
[ 16.977] (**) Option "xkb_variant" "dvorak"
[ 16.977] (**) Option "xkb_options" "ctrl:nocaps"
[ 16.977] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 16.978] (II) config/udev: Adding input device HID 04b3:3107 (/dev/input/event12)
[ 16.978] (**) HID 04b3:3107: Applying InputClass "evdev pointer catchall"
[ 16.978] (II) Using input driver 'evdev' for 'HID 04b3:3107'
[ 16.978] (**) HID 04b3:3107: always reports core events
[ 16.978] (**) evdev: HID 04b3:3107: Device: "/dev/input/event12"
[ 16.978] (--) evdev: HID 04b3:3107: Vendor 0x4b3 Product 0x3107
[ 16.978] (--) evdev: HID 04b3:3107: Found 3 mouse buttons
[ 16.978] (--) evdev: HID 04b3:3107: Found scroll wheel(s)
[ 16.978] (--) evdev: HID 04b3:3107: Found relative axes
[ 16.978] (--) evdev: HID 04b3:3107: Found x and y relative axes
[ 16.978] (II) evdev: HID 04b3:3107: Configuring as mouse
[ 16.978] (II) evdev: HID 04b3:3107: Adding scrollwheel support
[ 16.978] (**) evdev: HID 04b3:3107: YAxisMapping: buttons 4 and 5
[ 16.978] (**) evdev: HID 04b3:3107: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.978] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-4/3-4.6/3-4.6.1/3-4.6.1:1.0/input/input14/event12"
[ 16.978] (II) XINPUT: Adding extended input device "HID 04b3:3107" (type: MOUSE, id 9)
[ 16.978] (II) evdev: HID 04b3:3107: initialized for relative axes.
[ 16.978] (**) HID 04b3:3107: (accel) keeping acceleration scheme 1
[ 16.978] (**) HID 04b3:3107: (accel) acceleration profile 0
[ 16.978] (**) HID 04b3:3107: (accel) acceleration factor: 2.000
[ 16.978] (**) HID 04b3:3107: (accel) acceleration threshold: 4
[ 16.979] (II) config/udev: Adding input device HID 04b3:3107 (/dev/input/mouse1)
[ 16.979] (II) No input driver specified, ignoring this device.
[ 16.979] (II) This device may have been added with another device file.
[ 16.979] (II) config/udev: Adding input device USB Keyboard (/dev/input/event13)
[ 16.979] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.979] (II) Using input driver 'evdev' for ' USB Keyboard'
[ 16.979] (**) USB Keyboard: always reports core events
[ 16.979] (**) evdev: USB Keyboard: Device: "/dev/input/event13"
[ 16.979] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x2013
[ 16.979] (--) evdev: USB Keyboard: Found keys
[ 16.979] (II) evdev: USB Keyboard: Configuring as keyboard
[ 16.979] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-4/3-4.6/3-4.6.4/3-4.6.4:1.0/input/input15/event13"
[ 16.979] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 10)
[ 16.979] (**) Option "xkb_rules" "evdev"
[ 16.979] (**) Option "xkb_model" "pc104"
[ 16.979] (**) Option "xkb_layout" "de"
[ 16.979] (**) Option "xkb_variant" "dvorak"
[ 16.979] (**) Option "xkb_options" "ctrl:nocaps"
[ 16.980] (II) config/udev: Adding input device USB Keyboard (/dev/input/event14)
[ 16.980] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.980] (II) Using input driver 'evdev' for ' USB Keyboard'
[ 16.980] (**) USB Keyboard: always reports core events
[ 16.980] (**) evdev: USB Keyboard: Device: "/dev/input/event14"
[ 16.980] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x2013
[ 16.980] (--) evdev: USB Keyboard: Found keys
[ 16.980] (II) evdev: USB Keyboard: Configuring as keyboard
[ 16.980] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-4/3-4.6/3-4.6.4/3-4.6.4:1.1/input/input16/event14"
[ 16.980] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 11)
[ 16.980] (**) Option "xkb_rules" "evdev"
[ 16.980] (**) Option "xkb_model" "pc104"
[ 16.980] (**) Option "xkb_layout" "de"
[ 16.980] (**) Option "xkb_variant" "dvorak"
[ 16.980] (**) Option "xkb_options" "ctrl:nocaps"
[ 16.981] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 16.981] (II) No input driver specified, ignoring this device.
[ 16.981] (II) This device may have been added with another device file.
[ 16.981] (II) config/udev: Adding input device HDA Intel Dock Mic (/dev/input/event8)
[ 16.981] (II) No input driver specified, ignoring this device.
[ 16.981] (II) This device may have been added with another device file.
[ 16.981] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[ 16.981] (II) No input driver specified, ignoring this device.
[ 16.981] (II) This device may have been added with another device file.
[ 16.981] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event6)
[ 16.981] (II) No input driver specified, ignoring this device.
[ 16.981] (II) This device may have been added with another device file.
[ 16.982] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 16.982] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.982] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 16.982] (**) AT Translated Set 2 keyboard: always reports core events
[ 16.982] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 16.982] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 16.982] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 16.982] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 16.982] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 16.982] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 16.982] (**) Option "xkb_rules" "evdev"
[ 16.982] (**) Option "xkb_model" "pc104"
[ 16.982] (**) Option "xkb_layout" "de"
[ 16.982] (**) Option "xkb_variant" "dvorak"
[ 16.982] (**) Option "xkb_options" "ctrl:nocaps"
[ 16.982] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 16.982] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 16.982] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 16.983] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 16.983] (II) LoadModule: "synaptics"
[ 16.983] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 16.994] (II) Module synaptics: vendor="X.Org Foundation"
[ 16.994] compiled for 1.15.0, module version = 1.7.3
[ 16.994] Module class: X.Org XInput Driver
[ 16.994] ABI class: X.Org XInput driver, version 20.0
[ 16.994] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 16.994] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 16.995] (**) Option "Device" "/dev/input/event10"
[ 17.100] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 93)
[ 17.100] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 125)
[ 17.100] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 17.100] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 17.100] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 17.100] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 17.100] (**) Option "TapButton1" "1"
[ 17.100] (**) Option "TapButton2" "2"
[ 17.100] (**) Option "TapButton3" "3"
[ 17.100] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 17.100] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 17.163] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event10"
[ 17.163] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 17.163] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 17.163] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 17.163] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 17.164] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 17.164] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 17.164] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 17.164] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 17.164] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 17.165] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 17.165] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 17.166] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[ 17.166] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 17.166] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 17.166] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 17.166] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
[ 17.166] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 17.166] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 17.166] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 17.166] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 17.166] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 17.166] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 17.166] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17.166] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input12/event15"
[ 17.166] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[ 17.166] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 17.167] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 17.167] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 17.167] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 17.167] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 17.168] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[ 17.168] (II) No input driver specified, ignoring this device.
[ 17.168] (II) This device may have been added with another device file.
[ 17.168] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[ 17.168] (II) No input driver specified, ignoring this device.
[ 17.168] (II) This device may have been added with another device file.
[ 17.170] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[ 17.170] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 17.170] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 17.170] (**) ThinkPad Extra Buttons: always reports core events
[ 17.170] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
[ 17.170] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 17.170] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 17.170] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 17.170] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event4"
[ 17.170] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 15)
[ 17.170] (**) Option "xkb_rules" "evdev"
[ 17.170] (**) Option "xkb_model" "pc104"
[ 17.170] (**) Option "xkb_layout" "de"
[ 17.170] (**) Option "xkb_variant" "dvorak"
[ 17.170] (**) Option "xkb_options" "ctrl:nocaps"
[ 23.199] (II) intel(0): EDID vendor "LEN", prod id 16464
[ 23.201] (II) intel(0): Printing DDC gathered Modelines:
[ 23.201] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
[ 23.201] (II) intel(0): Modeline "1280x800"x0.0 59.26 1280 1304 1336 1408 800 803 809 816 -hsync -vsync (42.1 kHz e)
[ 23.900] (II) intel(0): resizing framebuffer to 3200x1200
[ 23.921] (II) intel(0): switch to mode [email protected] on pipe 0 using LVDS1, position (0, 0), rotation normal
[ 23.990] (II) intel(0): switch to mode [email protected] on pipe 1 using DVI1, position (0, 0), rotation normal
[ 23.997] (II) intel(0): switch to mode [email protected] on pipe 0 using DVI1, position (1280, 0), rotation normal
[ 24.533] (II) intel(0): switch to mode [email protected] on pipe 1 using LVDS1, position (0, 0), rotation normal
[ 48.537] (II) intel(0): switch to mode [email protected] on pipe 1 using DVI1, position (0, 0), rotation normal
[ 49.105] (II) intel(0): switch to mode [email protected] on pipe 0 using LVDS1, position (1920, 0), rotation normalKebertx wrote:I have the exact same problem (now on version 3.12), and commented on your bug report. Did you ever get this issue resolved? Furthermore, did GDM apply some of your keyboard settings but not others - were you getting a dvorak layout but not the caps-lock control key?
Yes, exactly. I do get the Dvorak layout that's set in 10-evdev.conf, but not the ctrl:nocaps option that's set there as well. -
A single screen resolution in xorg.conf, YET X11 still startups wrong
Hi. There's something that has been bugging me for a while. When I boot the first time my thinkpad SL500, usually (95% of the cases) X sets the resolution to 1024x768. Yet the ONLY screen res available in xorg.conf is 1280 x 800. In order to get to 1280x 800 I init 4 && init 5 every time. Why is this and how to fix it?
xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "glx"
Load "dri"
Load "record"
Load "dbe"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "evdev"
Option "XKbLayout" "de"
Option "XkbVariant" "nodeadkeys"
Option "XkbModel" "pc105"
Option "XkbRules" "xorg"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "SendCoreEvents" "true"
Option "VertEdgeScroll" "on"
Option "HorizEdgeScroll" "on"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Modeline "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841
Modeline "1280x800" 104.35 1280 1360 1496 1712 800 801 804 835
Modeline "1280x800" 88.68 1280 1352 1488 1696 800 801 804 830
Gamma 0.70 0.70 0.70 # created by KGamma
EndSection
Section "Device"
Identifier "Intel X4500MHD"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "DRI" "true"
Option "AccelMethod" "uxa"
Option "MigrationHeuristic" "greedy"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 24
Modes "1280x800_60.00"
Viewport 0 0
EndSubSection
EndSection
And /var/log/Xorg.0.log (non-relevant stuff stripped, shows only (WW) or (EE) and related):
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux evolution 2.6.31-ARCH #1 SMP PREEMPT Fri Oct 23 10:03:24 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(EE) Keyboard0: No device specified.
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for "Keyboard0"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event11"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.75 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (40.8 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.75 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (40.8 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.75 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (40.8 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.75 1280 1328 1360 1440 800 803 809 816 -hsync -vsync (40.8 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
As you can see, there's also a problem with the keyboard. How to get it working? Currently the keyboard layout is set via my DM.
Thanks.
Last edited by Flavious (2009-10-26 08:30:48)As I understand it your xorg.conf file needs fixing: you have 3 modelines:
Modeline "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841
Modeline "1280x800" 104.35 1280 1360 1496 1712 800 801 804 835
Modeline "1280x800" 88.68 1280 1352 1488 1696 800 801 804 830
in the Monitor section. Two of them have the same name, and in the in the Display section you are referring to a fourth mode "1280x800_60.00" that is never defined before.
Instead find out the correct mode from you monitor specs, then compute its modeline via cvt, then put that modeline into the Monitor section and refer to it in the display section. -
Arch64 ati radeon 3870 radeonhd driver. Problem with xorg.conf.
I've got a small problem with my xorg. I won't hide that i'm not a xorg nerd and i've used the automatic xorg tool to generate the xorg.conf. After starting X, the screen goes black and then after ~5 seconds montior switches to power-saving mode.
So here we go.
That's xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "record"
Load "dri2"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD 3870"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card1"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD 3870"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
and that's the log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 20:31:45 2009
(++) Using config file: "xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeonhd"
(II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.6.0, module version = 1.2.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
R700 : Radeon R700.
M98 : Radeon M98 Mobility.
RV730 : Radeon HD4670, HD4650.
M96 : Radeon M96 Mobility.
RV710 : Radeon HD4570, HD4350.
(II) RADEONHD: version 1.2.5, built from dist of git branch master, commit cb54f48b
(II) Primary Device is:
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] 1 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[8] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[9] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[12] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[13] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
[14] 1 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[15] 1 0 0x000003c0 - 0x000003df (0x20) IS[b]
(==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Selected ShadowFB.
(II) RADEONHD(0): Unknown card detected: 0x9501:0x1458:0x21A4.
If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9501:0x1458:0x21A4: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an RV670 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from PCI ROM
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
IOBaseAddress: 0xa000
Filename: Test.bin
BIOS Bootup Message:
GV-RX387512HP_F10
(II) RADEONHD(0): Default Engine Clock: 825000
(II) RADEONHD(0): Default Memory Clock: 900000
(II) RADEONHD(0): Calling ASIC Init
(II) RADEONHD(0): ASIC_INIT Successful
(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(0): Using only 262144kB of the total 524288kB.
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffc000
(II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffc000
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 536854528 (size: 16384) extends beyond available framebuffer size 268435456
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(0): Default Engine Clock: 825000
(II) RADEONHD(0): Default Memory Clock: 900000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): Direct rendering not officially supported on R600 and up
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f80
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f80
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
(--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC B to Connector TV 7PIN_DIN
(--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-I 2
(--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I 2
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
(II) RADEONHD(0): Output DVI-I_1/digital using monitor section Monitor0
(II) RADEONHD(0): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_1/analog has no monitor section
(II) RADEONHD(0): Output TV_7PIN_DIN has no monitor section
(II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(0): TMDS A: Sensed Output: DVI
(II) RADEONHD(0): Setting TMDS A to incoherent
(II) RADEONHD(0): I2C device "RHD I2C line 1:E-EDID segment register" registered at address 0x60.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
(II) RADEONHD(0): EDID data for W2253
(II) RADEONHD(0): Manufacturer: GSM Model: 56dc Serial#: 385315
(II) RADEONHD(0): Year: 2009 Week: 5
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 49 vert.: 32
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): DPMS capabilities: StandBy Suspend Off
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) RADEONHD(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) RADEONHD(0): Supported established timings:
(II) RADEONHD(0): 720x400@70Hz
(II) RADEONHD(0): 640x480@60Hz
(II) RADEONHD(0): 640x480@75Hz
(II) RADEONHD(0): 800x600@56Hz
(II) RADEONHD(0): 800x600@60Hz
(II) RADEONHD(0): 800x600@75Hz
(II) RADEONHD(0): 832x624@75Hz
(II) RADEONHD(0): 1024x768@60Hz
(II) RADEONHD(0): 1024x768@75Hz
(II) RADEONHD(0): 1280x1024@75Hz
(II) RADEONHD(0): 1152x870@75Hz
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported standard timings:
(II) RADEONHD(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEONHD(0): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEONHD(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 138.5 MHz Image Size: 510 x 290 mm
(II) RADEONHD(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) RADEONHD(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 148.5 MHz Image Size: 510 x 290 mm
(II) RADEONHD(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) RADEONHD(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 150 MHz
(II) RADEONHD(0): Monitor name: W2253
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff001e6ddc5623e10500
(II) RADEONHD(0): 0513010380312078eaee91a3544c9926
(II) RADEONHD(0): 0f5054a76b80b3008180818f714f0101
(II) RADEONHD(0): 0101010101011a3680a070381f403020
(II) RADEONHD(0): 3500fe221100001e023a801871382d40
(II) RADEONHD(0): 582c4500fe221100001c000000fd0038
(II) RADEONHD(0): 4b1e530f000a202020202020000000fc
(II) RADEONHD(0): 0057323235330a202020202020200081
(II) RADEONHD(0): EDID vendor "GSM", prod id 22236
(II) RADEONHD(0): Using EDID range info for horizontal sync
(II) RADEONHD(0): Using EDID range info for vertical refresh
(II) RADEONHD(0): Printing DDC gathered Modelines:
(II) RADEONHD(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync (66.6 kHz)
(II) RADEONHD(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEONHD(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Output DVI-I_1/digital connected
(II) RADEONHD(0): Output DVI-I_1/analog disconnected
(II) RADEONHD(0): Output TV_7PIN_DIN disconnected
(II) RADEONHD(0): Output DVI-I_2/digital disconnected
(II) RADEONHD(0): Output DVI-I_2/analog disconnected
(II) RADEONHD(0): Using exact sizes for initial modes
(II) RADEONHD(0): Output DVI-I_1/digital using initial mode 1920x1080
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Using 1920x1920 Framebuffer with 1920 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x00E10000)
(**) RADEONHD(0): Display dimensions: (490, 320) mm
(**) RADEONHD(0): DPI set to (99, 152)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEONHD(0): Using ShadowFB
(==) RADEONHD(1): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(1): Selected ShadowFB.
(II) RADEONHD(1): Unknown card detected: 0x9501:0x1458:0x21A4.
If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9501:0x1458:0x21A4: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(1): Detected an RV670 on an unidentified card
(II) RADEONHD(1): Mapped IO @ 0xf5000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(1): PCIE Card Detected
(II) RADEONHD(1): Getting BIOS copy from PCI ROM
(II) RADEONHD(1): ATOM BIOS Rom:
SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
IOBaseAddress: 0x0000
Filename: Test.bin
BIOS Bootup Message:
GV-RX387512HP_F10
(II) RADEONHD(1): Default Engine Clock: 825000
(II) RADEONHD(1): Default Memory Clock: 900000
(II) RADEONHD(1): Calling ASIC Init
(II) RADEONHD(1): ASIC_INIT Successful
(II) RADEONHD(1): Analog TV Default Mode: 27049664
(II) RADEONHD(1): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(1): Using only 262144kB of the total 524288kB.
(--) RADEONHD(1): VideoRAM: 262144 kByte
(II) RADEONHD(1): Framebuffer space used by Firmware (kb): 0
(WW) RADEONHD(1): rhdAtomGetFbBaseAndSize: AtomBIOS specified VRAM scratch space size invalid
(II) RADEONHD(1): default to: 20480
(II) RADEONHD(1): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(1): Default Engine Clock: 825000
(II) RADEONHD(1): Default Memory Clock: 900000
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(1): Maximum Pixel Clock: 400000
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): Direct rendering not officially supported on R600 and up
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f80
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f80
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(1): Detected VGA mode.
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(1): Maximum Pixel Clock: 400000
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(1): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
(II) RADEONHD(1): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(1): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
(--) RADEONHD(1): Attaching Output TMDS A to Connector DVI-I 1
(--) RADEONHD(1): Attaching Output DAC B to Connector DVI-I 1
(--) RADEONHD(1): Attaching Output DAC B to Connector TV 7PIN_DIN
(--) RADEONHD(1): Attaching Output TMDS B to Connector DVI-I 2
(--) RADEONHD(1): Attaching Output DAC A to Connector DVI-I 2
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
(II) RADEONHD(1): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
(II) RADEONHD(1): Output DVI-I_1/digital using monitor section Monitor1
(II) RADEONHD(1): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(1): Output DVI-I_1/analog has no monitor section
(II) RADEONHD(1): Output TV_7PIN_DIN has no monitor section
(II) RADEONHD(1): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(1): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(1): Output DVI-I_1/digital disconnected
(II) RADEONHD(1): Output DVI-I_1/analog disconnected
(II) RADEONHD(1): Output TV_7PIN_DIN disconnected
(II) RADEONHD(1): Output DVI-I_2/digital disconnected
(II) RADEONHD(1): Output DVI-I_2/analog disconnected
(WW) RADEONHD(1): No outputs definitely connected, trying again...
(II) RADEONHD(1): Output DVI-I_1/digital disconnected
(II) RADEONHD(1): Output DVI-I_1/analog disconnected
(II) RADEONHD(1): Output TV_7PIN_DIN disconnected
(II) RADEONHD(1): Output DVI-I_2/digital disconnected
(II) RADEONHD(1): Output DVI-I_2/analog disconnected
(WW) RADEONHD(1): Unable to find initial modes
(EE) RADEONHD(1): RandR: No valid modes. Disabling RandR support.
(EE) RADEONHD(1): Failed to detect a connected monitor
(II) RADEONHD(1): Destroying TMDS A
(II) RADEONHD(1): Destroying DAC B
(II) RADEONHD(1): Destroying TMDS B
(II) RADEONHD(1): Destroying DAC A
(II) RADEONHD(1): I2C bus "RHD I2C line 0" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 1" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 2" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 3" removed.
(II) UnloadModule: "radeonhd"
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0x7f39b66f6000 (size 0x10000000)
(WW) RADEONHD(0): RHDCSInit: No CS for R600 and up yet.
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEONHD(0): On Crtc 0 Setting 59.9 Hz Mode: Modeline "1920x1080" 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync
None
(II) RADEONHD(0): RHDAudioSetClock: using TMDS A as clock source with 138500 khz
(II) RADEONHD(0): Using ACR timing N=4096 CTS=138500 for frequency 32000
(II) RADEONHD(0): Using ACR timing N=6272 CTS=153888 for frequency 44100
(II) RADEONHD(0): Using ACR timing N=6144 CTS=138500 for frequency 48000
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(II) RADEONHD(0): DPMS enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 510 x 290
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event5"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) ImPS/2 Logitech Wheel Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
Last edited by warnab (2009-10-21 18:53:12)i'm getting then such log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 22:35:22 2009
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
Primary device is not PCI
(==) Using default built-in configuration (21 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default vesa Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information. -
[SOLVED] Prev working xorg.conf won't work with new nvidia
So I just upgraded to the latest nvidia driver. Previously, my xfx 6600 and dell 2001fp could display 1600x1200 just fine, but now it's ratcheting X down to 1400x1050 (even though 1600x1200 is the only option I've specified in the xorg.conf).
Any ideas?
Here's a relevant piece of the X log:
(II) NVIDIA(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "576x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using mode "1600x1200" (no mode of this name)
(**) NVIDIA(0): Validated modes for display device DFP-0:
(**) NVIDIA(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
Here's my xorg.conf (sorry for the length):
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "microsoft"
Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "dell lcd"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31-79
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-100
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "xfx"
Driver "nvidia"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "xfx"
Monitor "dell lcd"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1600x1200"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
thankshttp://www.nvnews.net/vbulletin/showthread.php?t=51431
Here's the one I'm using:
Modeline "1600x1200" 140.00 1600 1632 2024 2052 1200 1200 1208 1216 -
[SOLVED]Xorg.conf, mouse config problem
The Rapoo M765 mouse can not work properly under normal mouse configuration.
The mouse goes beyond controll when config as below:
hacksign@XSign [14:13:13] : ~
>> cat /etc/X11/xorg.conf.d/50-mouse-acceleration.conf
#Section "InputClass"
# Identifier "Mouse2"
# MatchProduct "RAPOO RAPOO 2.4G Remote Mouse"
# MatchIsPointer "yes"
# MatchDevicePath "/dev/input/event*"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Emulate3Buttons" "no"
# Option "Buttons" "7"
# Option "ButtonMapping" "1 2 3 6 7"
#EndSection
When there is no any configuration, the mouse can work abnormally. Movement and right/left click work fine, but I can not use scroll wheel,and the "go forward"&"go backward" mouse key can not work too.
(I know Option "ZAxisMapping" "4 5" is the configuration of scroll wheel emulation.)
The real problem is 'mouse beyond controll',the cursor goes crazyly on screen ....
I guess it is something wrong of ButtonMapping option. But when I tried to get button number from command xev,when scroll wheel scrolles, I get something below(the scroll wheel movement is identified as a key event~):
//left click
ButtonPress event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3766452, (135,143), root:(2287,595),
state 0x0, button 1, same_screen YES
ButtonRelease event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3766588, (135,143), root:(2287,595),
state 0x100, button 1, same_screen YES
//right click
ButtonPress event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3767716, (135,143), root:(2287,595),
state 0x0, button 3, same_screen YES
ButtonRelease event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3767852, (135,143), root:(2287,595),
state 0x400, button 3, same_screen YES
//mouse scroll, identified as keyboard event(?)
KeyRelease event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3769332, (135,143), root:(2287,595),
state 0x0, keycode 123 (keysym 0x1008ff13, XF86AudioRaiseVolume), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3769332, (135,143), root:(2287,595),
state 0x0, keycode 122 (keysym 0x1008ff11, XF86AudioLowerVolume), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
here is some Information(I dont know why the mouse is identified as 'type:KEYBOARD'):
hacksign@XSign [14:55:03] : ~
>> xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ RAPOO RAPOO 2.4G Remote Mouse id=13 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=15 [slave pointer (2)]
⎜ ↳ TPPS/2 IBM TrackPoint id=16 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Sleep Button id=8 [slave keyboard (3)]
↳ Heng Yu Technology Poker Pro S id=9 [slave keyboard (3)]
↳ Heng Yu Technology Poker Pro S id=10 [slave keyboard (3)]
↳ Integrated Camera id=11 [slave keyboard (3)]
↳ RAPOO RAPOO 2.4G Remote Mouse id=12 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=14 [slave keyboard (3)]
↳ ThinkPad Extra Buttons id=17 [slave keyboard (3)]
hacksign@XSign [14:55:06] : ~
>> xinput list-props 13
Device 'RAPOO RAPOO 2.4G Remote Mouse':
Device Enabled (142): 1
Coordinate Transformation Matrix (144): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (270): 0
Device Accel Constant Deceleration (271): 1.000000
Device Accel Adaptive Deceleration (272): 1.000000
Device Accel Velocity Scaling (273): 10.000000
Device Product ID (260): 9390, 8192
Device Node (261): "/dev/input/event8"
Evdev Axis Inversion (274): 0, 0
Evdev Axes Swap (276): 0
Axis Labels (277): "Rel X" (152), "Rel Y" (153), "Rel Horiz Wheel" (267), "Rel Dial" (268), "Rel Vert Wheel" (269)
Button Labels (278): "Button Left" (145), "Button Middle" (146), "Button Right" (147), "Button Wheel Up" (148), "Button Wheel Down" (149), "Button Horiz Wheel Left" (150), "Button Horiz Wheel Right" (151), "Button Side" (265), "Button Extra" (266), "Button Unknown" (263), "Button Unknown" (263), "Button Unknown" (263), "Button Unknown" (263)
Evdev Scrolling Distance (279): 1, 1, 1
Evdev Middle Button Emulation (280): 0
Evdev Middle Button Timeout (281): 50
Evdev Third Button Emulation (282): 0
Evdev Third Button Emulation Timeout (283): 1000
Evdev Third Button Emulation Button (284): 3
Evdev Third Button Emulation Threshold (285): 20
Evdev Wheel Emulation (286): 0
Evdev Wheel Emulation Axes (287): 0, 0, 4, 5
Evdev Wheel Emulation Inertia (288): 10
Evdev Wheel Emulation Timeout (289): 200
Evdev Wheel Emulation Button (290): 4
Evdev Drag Lock Buttons (291): 0
hacksign@XSign [14:55:14] : ~
>> grep -i rapoo /var/log/Xorg.0.log
[ 29.102] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/event7)
[ 29.102] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
[ 29.102] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
[ 29.102] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
[ 29.102] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event7"
[ 29.102] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
[ 29.102] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
[ 29.102] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
[ 29.102] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 12)
[ 29.103] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/event8)
[ 29.103] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev pointer catchall"
[ 29.103] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
[ 29.103] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
[ 29.103] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
[ 29.103] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event8"
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found 9 mouse buttons
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found scroll wheel(s)
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found relative axes
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found x and y relative axes
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found absolute axes
[ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Forcing absolute x/y axes to exist.
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
[ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as mouse
[ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
[ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Adding scrollwheel support
[ 29.103] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: YAxisMapping: buttons 4 and 5
[ 29.103] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.103] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 13)
[ 29.104] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: initialized for relative axes.
[ 29.104] (WW) evdev: RAPOO RAPOO 2.4G Remote Mouse: ignoring absolute axes.
[ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) keeping acceleration scheme 1
[ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration profile 0
[ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration factor: 2.000
[ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration threshold: 4
[ 29.104] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/mouse0)
hacksign@XSign [14:59:47] : ~
>> yaourt -Q|grep -i 'input-'
local/xf86-input-evdev-trackpoint 2.9.1-1
extra/xf86-input-keyboard 1.8.0-3 (xorg-drivers xorg)
extra/xf86-input-mouse 1.9.1-1 (xorg-drivers xorg)
extra/xf86-input-synaptics 1.8.1-1 (xorg-drivers xorg)
Last edited by Hacksign (2015-01-14 02:22:51)Thanks for reply !
change Driver 'mouse' to Driver 'evdev',solved cursor goes beyond controll problem.
but I still can not use scroll button and 'go forward'&'go backward' button.
(BTW:evdev_drv.so is from local/xf86-input-evdev-trackpoint, and local/xf86-input-evdev-trackpoint package is from AUR)
I think, maybe something wrong with my button number mapping, but I still can not get scroll button number with 'xev' command....
below is my configuration:
hacksign@XSign [17:15:19] : /var/log
>> cat /etc/X11/xorg.conf.d/50-mouse-acceleration.conf
Section "InputClass"
Identifier "Mouse2"
MatchProduct "RAPOO RAPOO 2.4G Remote Mouse"
MatchIsPointer "yes"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "Protocol" "auto"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
Option "Buttons" "9"
Option "ButtonMapping" "1 2 3 6 7 8 9 4 5"
EndSection
and here is Xorg.0.log
[ 11357.287] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
[ 11357.287] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
[ 11357.287] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
[ 11357.287] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event7"
[ 11357.287] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
[ 11357.287] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
[ 11357.287] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
[ 11357.287] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:24AE:2000.0003/input/input8/event7"
[ 11357.288] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 12)
[ 11357.288] (**) Option "xkb_rules" "evdev"
[ 11357.288] (**) Option "xkb_model" "pc104"
[ 11357.288] (**) Option "xkb_layout" "us"
[ 11357.288] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/event8)
[ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev pointer catchall"
[ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
[ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "Mouse2"
[ 11357.288] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
[ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
[ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event8"
[ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: ButtonMapping '1 2 3 6 7 8 9 4 5'
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found 9 mouse buttons
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found scroll wheel(s)
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found relative axes
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found x and y relative axes
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found absolute axes
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Forcing absolute x/y axes to exist.
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as mouse
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Adding scrollwheel support
[ 11357.288] (**) Option "Emulate3Buttons" "no"
[ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: YAxisMapping: buttons 4 and 5
[ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11357.288] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:24AE:2000.0004/input/input9/event8"
[ 11357.288] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 13)
[ 11357.288] (**) Option "xkb_rules" "evdev"
[ 11357.288] (**) Option "xkb_model" "pc104"
[ 11357.288] (**) Option "xkb_layout" "us"
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: initialized for relative axes.
[ 11357.288] (WW) evdev: RAPOO RAPOO 2.4G Remote Mouse: ignoring absolute axes.
[ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) keeping acceleration scheme 1
[ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration profile 0
[ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration factor: 2.000
[ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration threshold: 4
[ 11357.289] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/mouse0)
[ 11357.289] (II) No input driver specified, ignoring this device.
[ 11357.289] (II) This device may have been added with another device file.
olive wrote:In the config file you mentioned, all is commented; do you mean that you have problems when you have uncommented it? You should not use the mouse driver (old deprecated driver) but evdev. Try to remove xf86-input-mouse and xf86-input-keyboard (same as before, this is deprecated and handled by evdev) and remove also a "joystick" driver if you have it (I have had problem with it conflicting with the evdev driver).
Last edited by Hacksign (2015-01-13 09:27:06)
Maybe you are looking for
-
hi, So, basically... I had to owe Apple money when I had no money on my card but now I've got money on my card and it won't allow me to pay off what I need to and I'm still unable to even download apps, songs or anything and it's worrying me. Can som
-
Help passing table name as parameter to a procedure
Hello, i'm trying to write a procedure that takes a table name as input and uses a cursor to select a column,count(1) from the passed table to the cursor. The procedure i've come up with is as follows, CREATE OR REPLACE PROCEDURE excur( p_tbl use
-
Satellite L875D-S7232 Hangs Up When Booting on Battery Power
Hello all... As I stated in another thread regarding Special Function Keys, my new Satellite L875D-S7232 has an issue that during boot-up of Windows 7 HP SP1 without the AC Adapter plugged into it, it will "hang up". After many hours of troubleshooti
-
Missing information when an Outlook user cancel a meeting request
Hi all, Pardon the cross-posting but I put this question up in the iCal discussion group and didn't get any responses. There seam to be a lot of iCal ics and Mail integration discussion here so I thougt I'd try my luck. I've just switched over from E
-
I have a video in FullHD (1920x1080p), which I copied to an external hard drive (firewire 400). On the computer installed latest version of Perian and VLC. The image is displayed on the external TV via DVI-HDMI cable. When I try to play this movie I