[Xorg] Disabling Triple Buffering on Intel GPU

Hi. I want to disable Triple Buffering on my Intel GPU to be able to successfully run certain functions of this Matlab toolbox ( Psychtoolbox ).
I added the file /etc/X11/xorg.conf.d/20-intelhack.conf with this contents:
Section "Device"
Identifier "hack para psychtoolbox"
# Driver "intel"
Option "TripleBuffer" "Off"
Option "SwapbuffersWait" "Off"
Option "ModeDebug" "yes"
EndSection
But it is not working. You can see the relevant Xorg.0.log snippet:
[ 12079.805] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12079.805] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 12079.805] (==) intel(0): RGB weight 888
[ 12079.805] (==) intel(0): Default visual is TrueColor
[ 12079.805] (**) intel(0): Option "SwapbuffersWait" "Off"
[ 12079.805] (**) intel(0): Option "TripleBuffer" "Off"
[ 12079.805] (--) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 12079.805] (**) intel(0): Relaxed fencing enabled
[ 12079.805] (**) intel(0): Wait on SwapBuffers? disabled
[ 12079.805] (**) intel(0): Triple buffering? enabled
[ 12079.805] (**) intel(0): Framebuffer tiled
[ 12079.805] (**) intel(0): Pixmaps tiled
[ 12079.805] (**) intel(0): 3D buffers tiled
[ 12079.805] (**) intel(0): SwapBuffers wait disabled
Whiy is Triple buffering enabled when I explicitly disable it?

Similar Messages

MSI GE70 2PE: How to turn off onboard Intel GPU?

Hi everybody,
According to the system specifications my notebook must have a NVIDIA GeForce GTX 860M graphic device. However, after installing Linux Mint 17 i noticed that the only video device available is an Intel GPU (integrated Intel GPU). When i enter my BIOS, i cannot find any option to disable the onboard Intel GPU, maybe i missed it somewhere. Can anyone tell me how i can disable the onboard (integrated) Intel GPU so i can utilize the NVIDIA graphic device.
All help/hint/tips will be very much appreciated!
Thanks.
nomko

Quote from: Blender;113072
Hi Nomko
I'm not sure about Linux (I'm windows based) but would guess that it needs the nvidia linux drivers loaded before the system would recognise the second screen card, the system by default assumes that the intel chip is the one to be used.
Perhaps have a look here for drivers
http://www.geforce.co.uk/drivers
Later
Blender
Hi Blender,
I don't think this is the solution. If i want to use my NVidia graphic device, the Intel GPU must be disabled. Linux doesn't see the Nvidia graphic device at all right now and installs the driver for the Intel GPU as this is set as the default graphic device.
But thanks anyway!

GE70-2PE disable intel GPU(unlocked BIOS?)

Hello,
I'd like to ask for an unlocked BIOS for GE70 2PE-082XCZK, current BIOS: E1759IMS.52A
My goal is to disable the integrated intel GPU in BIOS as when I disable it via windows device management it seems to disable both GPU's and runs on some sort of phantom GPU(Aero off, games wont run, Afterburner shows GPU1 - (nothing) GPU2 - (nothing))
Thanks in advance

intel gpu can't be disabled
without it you can't see anything on the screen

Disabling Intel GPU in the Z68MA-ED55

From what I have seen so far in the BIOS (v10.3), there seems to be no way to completely deactivate the Intel GPU on my i5-2500 with this motherboard. Am I missing something here, is this feature perhaps planned in a future BIOS release, or is this type of functionality impossible under the z68 chipset?

Quote
I'm hoping a firmware developer can chime in here and provide some clarification on this
That may be a possibility. Perhaps you want to open a ticket with MSI technical and pose that question. >>How to contact MSI.<<

Intel GPU - OpenGL not working

Hi guys,
I've tried like everything I could find/think of I was able to get everything to work fine with the Nvidia (when I game I use this) but for some reason when I am using the Intel OpenGL just doesn't work...
GPU's
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M] (rev ff)
Xorg.0.log
[ 27.497]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 27.497] X Protocol Version 11, Revision 0
[ 27.497] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 27.497] Current Operating System: Linux bananas 3.15.5-2-ARCH #1 SMP PREEMPT Fri Jul 11 07:56:02 CEST 2014 x86_64
[ 27.497] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=991fc256-24bc-4a42-87f9-5f032bc0da05 rw quiet rcutree.rcu_idle_gp_delay=1
[ 27.497] Build Date: 27 June 2014 07:32:26PM
[ 27.497]
[ 27.497] Current version of pixman: 0.32.6
[ 27.497] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.497] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.498] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 27 22:08:43 2014
[ 27.530] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 27.530] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.548] (==) No Layout section. Using the first Screen section.
[ 27.549] (==) No screen section available. Using defaults.
[ 27.549] (**) |-->Screen "Default Screen Section" (0)
[ 27.549] (**) | |-->Monitor "<default monitor>"
[ 27.549] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 27.549] (**) | |-->Device "Intel Graphics"
[ 27.549] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 27.549] (==) Automatically adding devices
[ 27.549] (==) Automatically enabling devices
[ 27.549] (==) Automatically adding GPU devices
[ 27.638] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 27.639] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 27.639] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 27.639] (II) Loader magic: 0x811cc0
[ 27.639] (II) Module ABI versions:
[ 27.639] X.Org ANSI C Emulation: 0.4
[ 27.639] X.Org Video Driver: 15.0
[ 27.639] X.Org XInput driver : 20.0
[ 27.639] X.Org Server Extension : 8.0
[ 27.639] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 27.641] (--) PCI:*(0:0:2:0) 8086:0166:1558:1550 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 27.641] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 27.641] Initializing built-in extension Generic Event Extension
[ 27.641] Initializing built-in extension SHAPE
[ 27.641] Initializing built-in extension MIT-SHM
[ 27.641] Initializing built-in extension XInputExtension
[ 27.641] Initializing built-in extension XTEST
[ 27.641] Initializing built-in extension BIG-REQUESTS
[ 27.641] Initializing built-in extension SYNC
[ 27.641] Initializing built-in extension XKEYBOARD
[ 27.641] Initializing built-in extension XC-MISC
[ 27.642] Initializing built-in extension SECURITY
[ 27.642] Initializing built-in extension XINERAMA
[ 27.642] Initializing built-in extension XFIXES
[ 27.642] Initializing built-in extension RENDER
[ 27.642] Initializing built-in extension RANDR
[ 27.642] Initializing built-in extension COMPOSITE
[ 27.642] Initializing built-in extension DAMAGE
[ 27.642] Initializing built-in extension MIT-SCREEN-SAVER
[ 27.642] Initializing built-in extension DOUBLE-BUFFER
[ 27.642] Initializing built-in extension RECORD
[ 27.642] Initializing built-in extension DPMS
[ 27.642] Initializing built-in extension Present
[ 27.642] Initializing built-in extension DRI3
[ 27.642] Initializing built-in extension X-Resource
[ 27.642] Initializing built-in extension XVideo
[ 27.642] Initializing built-in extension XVideo-MotionCompensation
[ 27.642] Initializing built-in extension XFree86-VidModeExtension
[ 27.642] Initializing built-in extension XFree86-DGA
[ 27.642] Initializing built-in extension XFree86-DRI
[ 27.642] Initializing built-in extension DRI2
[ 27.642] (II) "glx" will be loaded by default.
[ 27.642] (II) LoadModule: "dri2"
[ 27.643] (II) Module "dri2" already built-in
[ 27.643] (II) LoadModule: "glamoregl"
[ 27.665] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 27.799] (II) Module glamoregl: vendor="X.Org Foundation"
[ 27.799] compiled for 1.15.0, module version = 0.6.0
[ 27.799] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.799] (II) LoadModule: "glx"
[ 27.799] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27.809] (II) Module glx: vendor="X.Org Foundation"
[ 27.809] compiled for 1.15.2, module version = 1.0.0
[ 27.809] ABI class: X.Org Server Extension, version 8.0
[ 27.809] (==) AIGLX enabled
[ 27.809] Loading extension GLX
[ 27.809] (II) LoadModule: "intel"
[ 27.822] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 27.852] (II) Module intel: vendor="X.Org Foundation"
[ 27.852] compiled for 1.15.2, module version = 2.99.912
[ 27.852] Module class: X.Org Video Driver
[ 27.852] ABI class: X.Org Video Driver, version 15.0
[ 27.853] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 27.853] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 27.853] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 27.853] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 27.853] (++) using VT number 1
[ 27.854] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 27.854] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 27.854] (==) intel(0): RGB weight 888
[ 27.854] (==) intel(0): Default visual is TrueColor
[ 27.854] (**) intel(0): Option "AccelMethod" "glamor"
[ 27.854] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 27.854] (**) intel(0): Relaxed fencing enabled
[ 27.854] (**) intel(0): Wait on SwapBuffers? enabled
[ 27.854] (**) intel(0): Triple buffering? enabled
[ 27.854] (**) intel(0): Framebuffer tiled
[ 27.854] (**) intel(0): Pixmaps tiled
[ 27.854] (**) intel(0): 3D buffers tiled
[ 27.854] (**) intel(0): SwapBuffers wait enabled
[ 27.854] (==) intel(0): video overlay key set to 0x101fe
[ 27.855] (II) intel(0): Output LVDS1 has no monitor section
[ 27.855] (--) intel(0): found backlight control interface acpi_video0
[ 27.856] (II) intel(0): Output VGA1 has no monitor section
[ 27.856] (II) intel(0): Output HDMI1 has no monitor section
[ 27.857] (II) intel(0): Output DP1 has no monitor section
[ 27.857] (II) intel(0): EDID for output LVDS1
[ 27.857] (II) intel(0): Manufacturer: CMO Model: 1720 Serial#: 0
[ 27.857] (II) intel(0): Year: 2011 Week: 2
[ 27.857] (II) intel(0): EDID Version: 1.3
[ 27.857] (II) intel(0): Digital Display Input
[ 27.857] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 27.857] (II) intel(0): Gamma: 2.20
[ 27.857] (II) intel(0): No DPMS capabilities specified
[ 27.857] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 27.857] (II) intel(0): First detailed timing is preferred mode
[ 27.857] (II) intel(0): redX: 0.640 redY: 0.333 greenX: 0.303 greenY: 0.613
[ 27.857] (II) intel(0): blueX: 0.154 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 27.857] (II) intel(0): Manufacturer's mask: 0
[ 27.857] (II) intel(0): Supported detailed timing:
[ 27.857] (II) intel(0): clock: 138.7 MHz Image Size: 382 x 215 mm
[ 27.857] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 27.857] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 27.857] (II) intel(0): N173HGE-L11
[ 27.857] (II) intel(0): CMO
[ 27.857] (II) intel(0): N173HGE-L11
[ 27.857] (II) intel(0): EDID (in hex):
[ 27.857] (II) intel(0): 00ffffffffffff000daf201700000000
[ 27.857] (II) intel(0): 02150103802615780ad895a3554d9d27
[ 27.857] (II) intel(0): 0f505400000001010101010101010101
[ 27.857] (II) intel(0): 0101010101012e3680a070381f403020
[ 27.857] (II) intel(0): 35007ed710000018000000fe004e3137
[ 27.857] (II) intel(0): 334847452d4c31310a20000000fe0043
[ 27.857] (II) intel(0): 4d4f0a202020202020202020000000fe
[ 27.857] (II) intel(0): 004e3137334847452d4c31310a20006e
[ 27.857] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 27.857] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 27.857] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 27.857] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 27.857] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 27.857] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 27.857] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 27.857] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 27.857] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 27.857] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 27.857] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 27.857] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 27.857] (II) intel(0): Printing probed modes for output LVDS1
[ 27.857] (II) intel(0): Modeline "1920x1080"x60.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 27.857] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 27.857] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 27.857] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 27.857] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 27.857] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 27.857] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 27.857] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 27.859] (II) intel(0): EDID for output VGA1
[ 27.859] (II) intel(0): EDID for output HDMI1
[ 27.859] (II) intel(0): EDID for output DP1
[ 27.859] (II) intel(0): Output LVDS1 connected
[ 27.859] (II) intel(0): Output VGA1 disconnected
[ 27.859] (II) intel(0): Output HDMI1 disconnected
[ 27.859] (II) intel(0): Output DP1 disconnected
[ 27.859] (II) intel(0): Using exact sizes for initial modes
[ 27.859] (II) intel(0): Output LVDS1 using initial mode 1920x1080
[ 27.859] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 27.859] (II) intel(0): Kernel page flipping support detected, enabling
[ 27.859] (==) intel(0): DPI set to (96, 96)
[ 27.859] (II) Loading sub module "fb"
[ 27.859] (II) LoadModule: "fb"
[ 27.859] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.878] (II) Module fb: vendor="X.Org Foundation"
[ 27.878] compiled for 1.15.2, module version = 1.0.0
[ 27.878] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.878] (II) Loading sub module "glamoregl"
[ 27.878] (II) LoadModule: "glamoregl"
[ 27.878] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 27.878] (II) Module glamoregl: vendor="X.Org Foundation"
[ 27.878] compiled for 1.15.0, module version = 0.6.0
[ 27.878] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.878] (II) glamor: OpenGL accelerated X.org driver based.
[ 28.008] (II) glamor: EGL version 1.4 (DRI2):
[ 28.077] (II) intel(0): glamor detected, initialising egl layer.
[ 28.077] (II) Loading sub module "dri2"
[ 28.077] (II) LoadModule: "dri2"
[ 28.077] (II) Module "dri2" already built-in
[ 28.077] (II) Loading sub module "dri3"
[ 28.077] (II) LoadModule: "dri3"
[ 28.078] (WW) Warning, couldn't open module dri3
[ 28.078] (II) UnloadModule: "dri3"
[ 28.078] (II) Unloading dri3
[ 28.078] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
[ 28.078] (==) Depth 24 pixmap format is 32 bpp
[ 28.078] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 28.093] (II) UXA(0): Driver registered support for the following operations:
[ 28.093] (II) solid
[ 28.093] (II) copy
[ 28.093] (II) composite (RENDER acceleration)
[ 28.093] (II) put_image
[ 28.093] (II) get_image
[ 28.093] (II) intel(0): [DRI2] Setup complete
[ 28.093] (II) intel(0): [DRI2] DRI driver: i965
[ 28.093] (II) intel(0): [DRI2] VDPAU driver: i965
[ 28.093] (==) intel(0): Backing store enabled
[ 28.093] (==) intel(0): Silken mouse enabled
[ 28.093] (II) intel(0): Initializing HW Cursor
[ 28.252] (II) intel(0): Use GLAMOR acceleration.
[ 28.252] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 28.267] (==) intel(0): DPMS enabled
[ 28.267] (==) intel(0): Intel XvMC decoder enabled
[ 28.267] (II) intel(0): Set up textured video
[ 28.267] (II) intel(0): Set up textured video using glamor
[ 28.267] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 28.267] (II) intel(0): DRI2: Enabled
[ 28.267] (II) intel(0): DRI3: Disabled
[ 28.267] (==) intel(0): hotplug detection: "enabled"
[ 28.276] (--) RandR disabled
[ 28.292] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 28.292] (II) AIGLX: enabled GLX_ARB_create_context
[ 28.292] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 28.292] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 28.292] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 28.292] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 28.292] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 28.292] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 28.292] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 28.292] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 28.292] (II) AIGLX: Loaded and initialized i965
[ 28.292] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 28.294] (II) intel(0): Setting screen physical size to 508 x 285
[ 28.778] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 28.778] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 28.778] (II) LoadModule: "evdev"
[ 28.778] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.797] (II) Module evdev: vendor="X.Org Foundation"
[ 28.797] compiled for 1.15.1, module version = 2.9.0
[ 28.797] Module class: X.Org XInput Driver
[ 28.797] ABI class: X.Org XInput driver, version 20.0
[ 28.797] (II) Using input driver 'evdev' for 'Power Button'
[ 28.797] (**) Power Button: always reports core events
[ 28.797] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 28.797] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28.797] (--) evdev: Power Button: Found keys
[ 28.797] (II) evdev: Power Button: Configuring as keyboard
[ 28.797] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 28.797] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 28.797] (**) Option "xkb_rules" "evdev"
[ 28.797] (**) Option "xkb_model" "pc104"
[ 28.797] (**) Option "xkb_layout" "us"
[ 28.834] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 28.834] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 28.834] (II) Using input driver 'evdev' for 'Video Bus'
[ 28.834] (**) Video Bus: always reports core events
[ 28.834] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 28.834] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 28.834] (--) evdev: Video Bus: Found keys
[ 28.834] (II) evdev: Video Bus: Configuring as keyboard
[ 28.834] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[ 28.834] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 28.834] (**) Option "xkb_rules" "evdev"
[ 28.834] (**) Option "xkb_model" "pc104"
[ 28.834] (**) Option "xkb_layout" "us"
[ 28.835] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 28.835] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 28.835] (II) Using input driver 'evdev' for 'Video Bus'
[ 28.835] (**) Video Bus: always reports core events
[ 28.835] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 28.835] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 28.835] (--) evdev: Video Bus: Found keys
[ 28.835] (II) evdev: Video Bus: Configuring as keyboard
[ 28.835] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input4/event4"
[ 28.835] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 28.835] (**) Option "xkb_rules" "evdev"
[ 28.835] (**) Option "xkb_model" "pc104"
[ 28.835] (**) Option "xkb_layout" "us"
[ 28.836] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 28.836] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 28.836] (II) Using input driver 'evdev' for 'Power Button'
[ 28.836] (**) Power Button: always reports core events
[ 28.836] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 28.836] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28.836] (--) evdev: Power Button: Found keys
[ 28.836] (II) evdev: Power Button: Configuring as keyboard
[ 28.836] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 28.836] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 28.836] (**) Option "xkb_rules" "evdev"
[ 28.836] (**) Option "xkb_model" "pc104"
[ 28.836] (**) Option "xkb_layout" "us"
[ 28.837] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 28.837] (II) No input driver specified, ignoring this device.
[ 28.837] (II) This device may have been added with another device file.
[ 28.837] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 28.837] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 28.837] (II) Using input driver 'evdev' for 'Sleep Button'
[ 28.837] (**) Sleep Button: always reports core events
[ 28.837] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 28.837] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 28.837] (--) evdev: Sleep Button: Found keys
[ 28.837] (II) evdev: Sleep Button: Configuring as keyboard
[ 28.837] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 28.837] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 28.837] (**) Option "xkb_rules" "evdev"
[ 28.837] (**) Option "xkb_model" "pc104"
[ 28.837] (**) Option "xkb_layout" "us"
[ 28.838] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 28.838] (II) config/udev: Adding input device 2.4GHz 2way RF Receiver (/dev/input/event7)
[ 28.838] (**) 2.4GHz 2way RF Receiver: Applying InputClass "evdev pointer catchall"
[ 28.838] (**) 2.4GHz 2way RF Receiver: Applying InputClass "evdev keyboard catchall"
[ 28.838] (II) Using input driver 'evdev' for '2.4GHz 2way RF Receiver'
[ 28.838] (**) 2.4GHz 2way RF Receiver: always reports core events
[ 28.838] (**) evdev: 2.4GHz 2way RF Receiver: Device: "/dev/input/event7"
[ 28.838] (--) evdev: 2.4GHz 2way RF Receiver: Vendor 0x1bcf Product 0x53e
[ 28.838] (--) evdev: 2.4GHz 2way RF Receiver: Found 12 mouse buttons
[ 28.838] (--) evdev: 2.4GHz 2way RF Receiver: Found scroll wheel(s)
[ 28.838] (--) evdev: 2.4GHz 2way RF Receiver: Found relative axes
[ 28.838] (--) evdev: 2.4GHz 2way RF Receiver: Found x and y relative axes
[ 28.838] (--) evdev: 2.4GHz 2way RF Receiver: Found absolute axes
[ 28.838] (II) evdev: 2.4GHz 2way RF Receiver: Forcing absolute x/y axes to exist.
[ 28.838] (--) evdev: 2.4GHz 2way RF Receiver: Found keys
[ 28.839] (II) evdev: 2.4GHz 2way RF Receiver: Configuring as mouse
[ 28.839] (II) evdev: 2.4GHz 2way RF Receiver: Configuring as keyboard
[ 28.839] (II) evdev: 2.4GHz 2way RF Receiver: Adding scrollwheel support
[ 28.839] (**) evdev: 2.4GHz 2way RF Receiver: YAxisMapping: buttons 4 and 5
[ 28.839] (**) evdev: 2.4GHz 2way RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 28.839] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1BCF:053E.0001/input/input11/event7"
[ 28.839] (II) XINPUT: Adding extended input device "2.4GHz 2way RF Receiver" (type: KEYBOARD, id 11)
[ 28.839] (**) Option "xkb_rules" "evdev"
[ 28.839] (**) Option "xkb_model" "pc104"
[ 28.839] (**) Option "xkb_layout" "us"
[ 28.839] (II) evdev: 2.4GHz 2way RF Receiver: initialized for relative axes.
[ 28.839] (WW) evdev: 2.4GHz 2way RF Receiver: ignoring absolute axes.
[ 28.839] (**) 2.4GHz 2way RF Receiver: (accel) keeping acceleration scheme 1
[ 28.839] (**) 2.4GHz 2way RF Receiver: (accel) acceleration profile 0
[ 28.839] (**) 2.4GHz 2way RF Receiver: (accel) acceleration factor: 2.000
[ 28.839] (**) 2.4GHz 2way RF Receiver: (accel) acceleration threshold: 4
[ 28.840] (II) config/udev: Adding input device 2.4GHz 2way RF Receiver (/dev/input/mouse0)
[ 28.840] (II) No input driver specified, ignoring this device.
[ 28.840] (II) This device may have been added with another device file.
[ 28.840] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 28.840] (II) No input driver specified, ignoring this device.
[ 28.840] (II) This device may have been added with another device file.
[ 28.840] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 28.840] (II) No input driver specified, ignoring this device.
[ 28.840] (II) This device may have been added with another device file.
[ 28.841] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 28.841] (II) No input driver specified, ignoring this device.
[ 28.841] (II) This device may have been added with another device file.
[ 28.841] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[ 28.841] (II) No input driver specified, ignoring this device.
[ 28.841] (II) This device may have been added with another device file.
[ 28.841] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[ 28.841] (II) No input driver specified, ignoring this device.
[ 28.841] (II) This device may have been added with another device file.
[ 28.842] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event15)
[ 28.842] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[ 28.842] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[ 28.842] (**) BisonCam, NB Pro: always reports core events
[ 28.842] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event15"
[ 28.842] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x401
[ 28.842] (--) evdev: BisonCam, NB Pro: Found keys
[ 28.842] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[ 28.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input22/event15"
[ 28.842] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 12)
[ 28.842] (**) Option "xkb_rules" "evdev"
[ 28.842] (**) Option "xkb_model" "pc104"
[ 28.842] (**) Option "xkb_layout" "us"
[ 28.843] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
[ 28.843] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 28.843] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 28.843] (**) AT Translated Set 2 keyboard: always reports core events
[ 28.843] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event6"
[ 28.843] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 28.843] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 28.843] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 28.843] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input6/event6"
[ 28.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 28.843] (**) Option "xkb_rules" "evdev"
[ 28.843] (**) Option "xkb_model" "pc104"
[ 28.843] (**) Option "xkb_layout" "us"
[ 28.844] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event14)
[ 28.844] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 28.844] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 28.844] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 28.844] (II) LoadModule: "synaptics"
[ 28.844] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 28.853] (II) Module synaptics: vendor="X.Org Foundation"
[ 28.853] compiled for 1.15.1, module version = 1.8.0
[ 28.853] Module class: X.Org XInput Driver
[ 28.853] ABI class: X.Org XInput driver, version 20.0
[ 28.853] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 28.853] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 28.853] (**) Option "Device" "/dev/input/event14"
[ 28.910] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2436 (res 0)
[ 28.910] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1044 (res 0)
[ 28.910] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 28.910] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 28.910] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 28.910] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 28.910] (**) Option "TapButton1" "1"
[ 28.910] (**) Option "TapButton2" "2"
[ 28.910] (**) Option "TapButton3" "3"
[ 28.910] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 28.910] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 28.936] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input14/event14"
[ 28.936] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 28.936] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 28.936] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 28.937] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.075
[ 28.937] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 28.937] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 28.937] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 28.937] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 28.937] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 28.937] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 28.938] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 28.938] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 28.938] (II) No input driver specified, ignoring this device.
[ 28.938] (II) This device may have been added with another device file.
[ 41.685] (II) intel(0): EDID vendor "CMO", prod id 5920
[ 42.486] (II) intel(0): Printing DDC gathered Modelines:
[ 42.486] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 62.731] (II) intel(0): EDID vendor "CMO", prod id 5920
[ 62.731] (II) intel(0): Printing DDC gathered Modelines:
[ 62.731] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 62.734] (II) intel(0): EDID vendor "CMO", prod id 5920
[ 62.734] (II) intel(0): Printing DDC gathered Modelines:
[ 62.734] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 63.746] (II) intel(0): EDID vendor "CMO", prod id 5920
[ 63.746] (II) intel(0): Printing DDC gathered Modelines:
[ 63.746] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 63.748] (II) intel(0): EDID vendor "CMO", prod id 5920
[ 63.748] (II) intel(0): Printing DDC gathered Modelines:
[ 63.748] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 64.053] (II) intel(0): EDID vendor "CMO", prod id 5920
[ 64.053] (II) intel(0): Printing DDC gathered Modelines:
[ 64.053] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 64.055] (II) intel(0): EDID vendor "CMO", prod id 5920
[ 64.055] (II) intel(0): Printing DDC gathered Modelines:
[ 64.055] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[ 64.654] (II) intel(0): EDID vendor "CMO", prod id 5920
[ 64.654] (II) intel(0): Printing DDC gathered Modelines:
[ 64.654] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
pacman -Q
a52dec 0.7.4-8
aalib 1.4rc5-10
abs 2.4.4-2
acetoneiso2 2.3-6
acl 2.2.52-2
advancecomp 1.19-3
akonadi 1.12.1-2
al-anvar 0.6.0-2
alsa-lib 1.0.28-1
alsa-plugins 1.0.28-1
alsa-utils 1.0.28-1
apache 2.4.10-1
apr 1.5.1-1
apr-util 1.5.3-4
archlinux-keyring 20140220-1
arista 0.9.7-8
art-sharp 2.24.2-4
aspell 0.60.6.1-2
aspell-en 7.1-3
at-spi2-atk 2.12.1-1
at-spi2-core 2.12.0-1
atk 2.12.0-1
atkmm 2.22.7-1
attica 0.4.2-1
attica-qt5 5.0.0-1
attr 2.4.47-1
aura-bin 1.2.3.4-1
autoconf 2.69-2
automake 1.14.1-1
automake-1.11 1.11.6-2
automoc4 0.9.88-5
avahi 0.6.31-12
babl 0.1.10-2
bash 4.3.018-3
bash-completion 2.1-5
bbswitch 0.8-12
bc 1.06.95-1
binutils 2.24-6
bison 3.0.2-1
boost 1.55.0-6
boost-libs 1.55.0-6
brasero 3.11.3-1
bumblebee 3.2.1-3
burpsuite 1.6-2
bzip2 1.0.6-5
bzr 2.6.0-1
ca-certificates 20140325-1
ca-certificates-java 20140324-3
cabextract 1.4-2
cairo 1.12.16-2
cairo-perl 1.104-2
cairomm 1.10.0-3
cantarell-fonts 0.0.15-1
cdparanoia 10.2-5
cdrdao 1.2.3-7
cdrkit 1.1.11-3
celt 0.11.3-2
chromaprint 1.1-1
chromium 36.0.1985.125-1
chromo-erectus-icon-themes 1.2-1
cifs-utils 6.3-2
clementine 1.2.3-1
clipit-git 20120506-1
cln 1.3.3-2
cloog 0.18.1-3
clucene 2.3.3.4-8
cmake 3.0.0-3
colord 1.2.1-1
compiz-core-bzr 3874-9
compositeproto 0.4.2-3
coreutils 8.23-1
cracklib 2.9.0-2
cratos-lion-icons 2.0-3
cryptsetup 1.6.5-1
cups 1.7.4-1
cups-filters 1.0.54-1
curl 7.37.1-1
damageproto 1.2.1-3
db 5.3.28-1
dbus 1.8.6-1
dbus-glib 0.102-1
dbus-sharp 0.7.0-5
dbus-sharp-glib 0.5.0-5
dconf 0.20.0-1
debootstrap 1.0.60~bpo70+1-1
desktop-file-utils 0.22-1
device-mapper 2.02.106-2
dhcpcd 6.4.2-1
dialog 1:1.2_20140219-1
diffutils 3.3-2
dirmngr 1.1.1-2
djvulibre 3.5.25.3-2
dkms 2.2.0.3-14
dmg2img 1.6.5-3
dmxproto 2.3.1-3
dnssec-anchors 20140629-1
dnsutils 9.9.2.P2-2
docbook-xml 4.5-6
docbook-xsl 1.78.1-1
docky 2.2.0-1
dosbox 0.74-6
dosfstools 3.0.26-1
dotconf 1.3-4
doxygen 1.8.7-1
dri2proto 2.8-2
dri3proto 1.0-1
dvd+rw-tools 7.1-5
e2fsprogs 1.42.10-1
eigen 3.2.1-1
elementary-icon-theme 3.1-4
elfutils 0.159-1
emerald-themes 0.6.0-4
emerald0.9 0.9.5-9
enca 1.15-1
enchant 1.6.0-5
evince 3.12.1-1
evolution 3.12.4-1
evolution-data-server 3.12.4-1
evolution-ews 3.12.4-1
evolution-tray-arch 20130317-1
exempi 2.2.1-2
exiv2 0.24-1
exo 0.10.2-2
expac 3-1
expat 2.1.0-3
ext3grep 0.10.2-3
extundelete 0.2.4-2
faac 1.28-5
faad2 2.7-4
faenza-icon-theme 1.3.1-3
faience-icon-theme 0.5.1-3
fakeroot 1.20-1
farstream-0.1 0.1.2-4
ffmpeg 1:2.3-1
ffmpeg-compat 1:0.10.13-1
fftw 3.3.4-1
file 5.19-1
file-roller 3.12.2-1
filesystem 2014.07-1
filezilla 3.8.1-1
finch 2.10.9-2
findmyhash 1.1.2-3
findutils 4.4.2-6
firefox 31.0-1
fixesproto 5.0-3
flac 1.3.0-3
flashplugin 11.2.202.394-1
flex 2.5.39-1
fluidsynth 1.1.6-3
fondu 060102-4
font-misc-ethiopic 1.0.3-1
fontconfig 2.11.1-1
fontconfig-infinality-git 101.91eb8e6-1
fontforge 20140101-3
fontsproto 2.1.3-1
freeglut 2.8.1-1
freerdp-git 1.2.0.beta1.android7.r108.g9e1793c-1
freetype2-infinality 2.4.12-2
frei0r-plugins 1.4-2
fribidi 0.19.6-1
fuse 2.9.3-2
fuse-exfat 1.1.0-1
fuseiso 20070708-5
gamin 0.1.10-8
garcon 0.2.1-1
gavl 1.4.0-2
gawk 4.1.1-1
gc 7.4.2-1
gcc-libs-multilib 4.9.1-1
gcc-multilib 4.9.1-1
gconf 3.2.6-3
gconf-editor 3.0.1-3
gconf-perl 1.044-9
gconf-sharp 2.24.2-4
gconf-sharp-peditors 2.24.2-4
gcr 3.12.2-1
gd 2.1.0-2
gdb 7.7.1-1
gdbm 1.11-1
gdk-pixbuf2 2.30.8-1
gegl 0.2.0-11
gendesk 0.6.2-1
geoclue2 2.1.8-2
gettext 0.19.1-1
gggooglescan 0.4-1
ghostscript 9.14-1
giflib 5.1.0-1
gimp 2.8.10-1
gio-sharp 0.3-2
git 2.0.3-1
gkeyfile-sharp 0.1-3
gksu 2.0.2-5
glamor-egl 0.6.0-1
glew 1.10.0-2
glib-networking 2.40.1-1
glib-perl 1.305-1
glib2 2.40.0-1
glibc 2.19-5
glibmm 2.40.0-1
glproto 1.4.17-1
glu 9.0.0-3
gmime 2.6.20-2
gmp 6.0.0-1
gnome-calculator 3.12.3-1
gnome-common 3.12.0-1
gnome-desktop 1:3.12.2-1
gnome-desktop2 2.32.1-3
gnome-doc-utils 0.20.10-2
gnome-icon-theme 3.12.0-2
gnome-icon-theme-symbolic 3.12.0-2
gnome-keyring 3.12.2-1
gnome-keyring-sharp 1.0.2-5
gnome-mime-data 2.18.0-7
gnome-online-accounts 3.12.3-1
gnome-perl 1.045-2
gnome-screensaver 3.6.1-8
gnome-sharp 2.24.2-4
gnome-themes-standard 3.12.0-1
gnome-vfs 2.24.4-8
gnome-vfs-perl 1.082-2
gnome-vfs-sharp 2.24.2-4
gnomecanvas-perl 1.002-12
gnu-netcat 0.7.1-5
gnupg 2.0.25-1
gnutls 3.3.6-1
gobject-introspection 1.40.0-1
goocanvas1 1.0.0-3
gparted-git 0.19.0.4.g0fcfd18-1
gpgme 1.5.0-1
gpm 1.20.7-4
grantlee 0.4.0-1
graphite 1:1.2.4-1
graphviz 2.36.0-3
grep 2.20-1
groff 1.22.2-6
grub 1:2.02.beta2-4
gsettings-desktop-schemas 3.12.2-1
gsfonts 1.0.7pre44-4
gsm 1.0.13-7
gst-plugins-bad 1.4.0-1
gst-plugins-base 1.4.0-1
gst-plugins-base-libs 1.4.0-1
gst-plugins-good 1.4.0-1
gst-plugins-ugly 1.4.0-1
gstreamer 1.4.0-1
gstreamer0.10 0.10.36-4
gstreamer0.10-bad 0.10.23-8
gstreamer0.10-bad-plugins 0.10.23-8
gstreamer0.10-base 0.10.36-3
gstreamer0.10-base-plugins 0.10.36-3
gstreamer0.10-ffmpeg 0.10.13-2
gstreamer0.10-good 0.10.31-6
gstreamer0.10-good-plugins 0.10.31-6
gstreamer0.10-python 0.10.22-2
gstreamer0.10-ugly 0.10.19-11
gstreamer0.10-ugly-plugins 0.10.19-11
gtest 1.7.0-1
gtk-doc 1.20-1
gtk-engines 2.21.0-2
gtk-recordmydesktop 0.3.8-7
gtk-sharp-2 2.12.22-1
gtk-update-icon-cache 2.24.24-1
gtk2 2.24.24-1
gtk2-perl 1.2492-1
gtk2-xfce-engine 3.0.1-2
gtk3 3.12.2-1
gtk3-xfce-engine 3.0.1-2
gtkglext 1.2.0-10
gtkhtml4 4.8.3-1
gtkimageview 1.6.4-4
gtkmm 2.24.4-1
gtkmm3 3.12.0-1
gtksourceview3 3.12.2-1
gtkspell 2.0.16-3
gtkspell3 3.0.6-1
gts 0.7.6-3
guifications 2.16-3
guile 2.0.11-1
gvfs 1.20.2-1
gzip 1.6-1
harfbuzz 0.9.32-1
harfbuzz-icu 0.9.32-1
hash-identifier 1.1-2
hashcat 0.47-2
hicolor-icon-theme 0.13-1
hspell 1.2-2
htop-blueweb 1.0.3-1
hunspell 1.3.3-1
hunspell-en-base 7.1-2
hwids 20140602-1
hyphen 2.8.7-2
iana-etc 2.30-4
icu 53.1-1
id3 0.78-4
idnkit 1.0-3
ilmbase 2.1.0-1
imagemagick 6.8.9.5-1
imlib2 1.4.6-3
inetutils 1.9.2-1
iniparser 3.1-4
inputproto 2.3.1-1
intel-dri 10.2.4-1
intel-tbb 4.2_20140601-1
intltool 0.50.2-2
iphoneanalyzer 2.1.0-1
iproute2 3.14.0-1
iptables 1.4.21-1
iputils 20121221-3
ipw2200-fw 3.1-5
isl 0.13-1
iso-codes 3.52-1
jack 0.124.1-1
jansson 2.6-1
jasper 1.900.1-10
jdk7-openjdk 7.u65_2.5.1-3
jfsutils 1.1.15-4
jpegoptim 1.4.1-1
jre7-openjdk 7.u65_2.5.1-3
jre7-openjdk-headless 7.u65_2.5.1-3
js17 17.0.0-1
jshon 20131105-1
json-c 0.12-2
json-glib 1.0.2-1
jynx2 2.0-1
kactivities-frameworks 5.0.0-1
karchive 5.0.0-1
kauth 5.0.0-1
kbd 2.0.1-1
kbookmarks 5.0.0-1
kbproto 1.0.6-2
kcodecs 5.0.0-1
kcompletion 5.0.0-1
kconfig 5.0.0-1
kconfigwidgets 5.0.0-1
kcoreaddons 5.0.0-1
kcrash 5.0.0-1
kdbusaddons 5.0.0-1
kde-base-artwork 4.13.3-1
kdebase-runtime 4.13.3-1
kdebase-workspace 4.11.11-1
kdelibs 4.13.3-1
kdenlive-git v0.9.8.r28.g190f218-1
kdepim-runtime 4.13.3-1
kdepimlibs 4.13.3-1
keyutils 1.5.9-1
kglobalaccel 5.0.0-1
kguiaddons 5.0.0-1
ki18n 5.0.0-1
kiconthemes 5.0.0-1
kio 5.0.0-1
kitemviews 5.0.0-1
kjobwidgets 5.0.0-1
kmod 18-1
knotifications 5.0.0-1
krb5 1.12.1-1
kservice 5.0.0-1
ktextwidgets 5.0.0-1
kwallet 5.0.0-1
kwidgetsaddons 5.0.0-1
kwindowsystem 5.0.0-1
kxmlgui 5.0.0-1
ladspa 1.13-5
lame 3.99.5-2
lcms 1.19-5
lcms2 2.6-1
ldb 1.1.16-1
ldns 1.6.17-1
less 458-1
lib32-acl 2.2.52-2
lib32-alsa-lib 1.0.28-1
lib32-alsa-plugins 1.0.28-1
lib32-atk 2.12.0-1
lib32-attr 2.4.47-1
lib32-bzip2 1.0.6-2
lib32-cairo 1.12.16-1
lib32-db 5.3.28-1
lib32-e2fsprogs 1.42.11-1
lib32-elfutils 0.159-1
lib32-expat 2.1.0-2
lib32-flac 1.3.0-1
lib32-fontconfig 2.11.1-1
lib32-freeglut 2.8.1-1
lib32-freetype2 2.5.3-1
lib32-gcc-libs 4.9.1-1
lib32-gdk-pixbuf2 2.30.8-1
lib32-gettext 0.19.1-1
lib32-giflib 5.1.0-1
lib32-glew 1.10.0-1
lib32-glib2 2.40.0-1
lib32-glibc 2.19-5
lib32-glu 9.0.0-2
lib32-gmp 6.0.0-1
lib32-gnutls 3.3.6-1
lib32-gstreamer0.10 0.10.36-3
lib32-gstreamer0.10-base 0.10.36-5
lib32-gtk2 2.24.24-1
lib32-harfbuzz 0.9.32-1
lib32-icu 53.1-1
lib32-intel-dri 10.2.4-1
lib32-jack 0.124.1-1
lib32-json-c 0.12-1
lib32-keyutils 1.5.9-1
lib32-krb5 1.12.1-1
lib32-lcms2 2.6-1
lib32-libaio 0.3.109-6
lib32-libao 1.2.0-1
lib32-libasyncns 0.8-7
lib32-libcanberra 0.30-4
lib32-libcap 2.24-1
lib32-libcl 1.1-1
lib32-libcups 1.7.4-1
lib32-libdbus 1.8.6-1
lib32-libdrm 2.4.54-1
lib32-libffi 3.1-1
lib32-libgcrypt 1.6.1-1
lib32-libgpg-error 1.13-1
lib32-libice 1.0.9-1
lib32-libjpeg-turbo 1.3.1-1
lib32-libldap 2.4.39-1
lib32-libltdl 2.4.2-14
lib32-libmng 2.0.2-1
lib32-libogg 1.3.1-1
lib32-libpciaccess 0.13.2-1
lib32-libpng 1.6.12-1
lib32-libpulse 5.0-1
lib32-libsamplerate 0.1.8-2
lib32-libsm 1.2.2-1
lib32-libsndfile 1.0.25-3
lib32-libtasn1 3.6-1
lib32-libtiff 4.0.3-2
lib32-libtxc_dxtn 1.0.1-5
lib32-libvdpau 0.8-1
lib32-libvorbis 1.3.4-1
lib32-libx11 1.6.2-1
lib32-libxau 1.0.8-1
lib32-libxcb 1.10-3
lib32-libxcomposite 0.4.4-2
lib32-libxcursor 1.1.14-1
lib32-libxdamage 1.1.4-2
lib32-libxdmcp 1.1.1-2
lib32-libxext 1.3.3-1
lib32-libxfixes 5.0.1-1
lib32-libxft 2.3.2-1
lib32-libxi 1.7.4-1
lib32-libxinerama 1.1.3-1
lib32-libxml2 2.9.1-1
lib32-libxmu 1.1.2-1
lib32-libxrandr 1.4.2-1
lib32-libxrender 0.9.8-1
lib32-libxshmfence 1.1-1
lib32-libxslt 1.1.28-2
lib32-libxss 1.2.2-2
lib32-libxt 1.1.4-1
lib32-libxtst 1.2.2-1
lib32-libxv 1.0.10-1
lib32-libxxf86vm 1.1.3-1
lib32-llvm-libs 3.4.2-1
lib32-mesa 10.2.4-1
lib32-mesa-libgl 10.2.4-1
lib32-mpg123 1.20.0-1
lib32-ncurses 5.9-3
lib32-nettle 2.7.1-1
lib32-nouveau-dri 10.2.4-1
lib32-nvidia-cg-toolkit 3.1-4
lib32-nvidia-utils 340.24-1
lib32-openal 1.15.1-2
lib32-openssl 1.0.1.h-1
lib32-orc 0.4.19-1
lib32-p11-kit 0.20.2-1
lib32-pango 1.36.5-1
lib32-pcre 8.35-1
lib32-pixman 0.32.6-1
lib32-portaudio 19_20140130-1
lib32-qt4 4.8.6-1
lib32-readline 6.3.006-1
lib32-sdl 1.2.15-6
lib32-soundtouch 1.8.0-1
lib32-sqlite 3.8.5-1
lib32-systemd 215-1
lib32-tdb 1.2.12-1
lib32-util-linux 2.24.2-1
lib32-v4l-utils 1.2.1-1
lib32-wayland 1.5.0-1
lib32-wxgtk2.8 2.8.12.1-2
lib32-xz 5.0.5-1
lib32-zlib 1.2.8-1
libaio 0.3.109-7
libao 1.2.0-1
libappindicator 12.10.0-2
libarchive 3.1.2-6
libart-lgpl 2.3.21-3
libass 0.11.2-1
libassuan 2.1.1-1
libasyncns 0.8-5
libatasmart 0.19-3
libatomic_ops 7.4.2-1
libavc1394 0.5.4-2
libbluray 0.5.0-1
libbonobo 2.32.1-4
libbonoboui 2.24.5-2
libbsd 0.6.0-2
libburn 1.3.8-1
libcaca 0.99.beta18-2
libcanberra 0.30-4
libcanberra-pulse 0.30-4
libcap 2.24-1
libcap-ng 0.7.4-1
libcdaudio 0.99.12-7
libcddb 1.3.2-4
libcdio 0.92-1
libcdio-paranoia 10.2+0.90+1-2
libcl 1.1-4
libcroco 0.6.8-2
libcups 1.7.4-1
libdaemon 0.14-3
libdatrie 0.2.6-1
libdbus 1.8.6-1
libdbusmenu-glib 12.10.2-3
libdbusmenu-gtk2 12.10.2-3
libdbusmenu-qt 0.9.2-3
libdbusmenu-qt5 0.9.3+14.10.20140619-1
libdc1394 2.2.1-2
libdca 0.0.5-4
libdmtx 0.7.4-5
libdmx 1.1.3-1
libdrm 2.4.54-1
libdv 1.0.0-6
libdvbpsi 1:1.1.2-1
libdvdnav 4.2.1-1
libdvdread 4.9.9-1
libebml 1.3.0-2
libedit 20140213_3.1-1
libepoxy 1.2-3
libevdev 1.2.2-1
libevent 2.0.21-3
libexif 0.6.21-2
libffi 3.1-2
libfontenc 1.1.2-1
libftdi-compat 0.20-1
libgcrypt 1.6.1-1
libgcrypt15 1.5.3-1
libgdata 0.15.1-1
libgdiplus 2.10.9-5
libgksu 2.0.12-6
libglade 2.6.4-5
libgme 0.6.0-3
libgnome 2.32.1-5
libgnome-data 2.32.1-5
libgnome-desktop-sharp 2.26.0-10
libgnome-keyring 3.12.0-1
libgnome-sharp 2.24.2-4
libgnomecanvas 2.30.3-3
libgnomekbd 3.6.0-2
libgnomeui 2.24.5-2
libgpg-error 1.13-1
libgpod 0.8.3-2
libgsf 1.14.30-1
libgssglue 0.4-2
libgtop 2.30.0-1
libgusb 0.1.6-1
libgweather 3.12.2-1
libgxps 0.2.2-3
libical 1.0-3
libice 1.0.9-1
libid3tag 0.15.1b-8
libidl2 0.8.14-3
libidn 1.28-2
libiec61883 1.2.0-4
libimobiledevice 1.1.6-1
libindicator-gtk2 12.10.1-4
libindicator-gtk3 12.10.1-4
libirman 0.4.5-4
libisofs 1.3.8-1
libjpeg-turbo 1.3.1-1
libkactivities4 4.13.3-1
libkate 0.4.1-4
libkeybinder2 0.3.0-2
libkfbapi 1.0-1
libkgapi 2.1.1-1
libkolab 0.5.0-1
libkolabxml 1.0.1-1
libksba 1.3.0-1
liblastfm 1.0.8-1
libldap 2.4.39-1
liblqr 0.4.2-1
liblrdf 0.5.0-2
libltdl 2.4.2-14
libmad 0.15.1b-7
libmariadbclient 10.0.12-2
libmatroska 1.4.1-1
libmikmod 3.3.6-1
libmm-glib 1.2.0-4
libmms 0.6.4-1
libmng 2.0.2-3
libmodplug 0.8.8.5-1
libmp4v2 2.0.0-3
libmpc 1.0.2-2
libmpcdec 1.2.6-4
libmpeg2 0.5.1-5
libmspack 0.4alpha-1
libmtp 1.1.6-6
libmygpo-qt 1.0.7-1
libnautilus-extension 3.12.2-1
libnice 0.1.4-1
libnl 3.2.24-1
libnm-glib 0.9.8.10-3
libnotify 0.7.6-1
liboauth 1.0.3-1
libofa 0.9.3-5
libogg 1.3.1-2
libomxil-bellagio 0.9.3-1
libotr 4.0.0-5
libpaper 1.1.24-7
libpcap 1.5.3-1
libpciaccess 0.13.2-2
libpipeline 1.3.0-1
libplist 1.11-1
libpng 1.6.12-1
libproxy 0.4.11-4
libpst 0.6.63-1
libpulse 5.0-1
libpurple 2.10.9-2
libqalculate 0.9.7-4
libqzeitgeist 0.8.0-4
libraw1394 2.1.0-2
libreoffice-af 4.2.5-1
libreoffice-base 4.2.5-1
libreoffice-calc 4.2.5-1
libreoffice-common 4.2.5-1
libreoffice-draw 4.2.5-1
libreoffice-en-US 4.2.5-1
libreoffice-gnome 4.2.5-1
libreoffice-impress 4.2.5-1
libreoffice-kde4 4.2.5-1
libreoffice-math 4.2.5-1
libreoffice-postgresql-connector 4.2.5-1
libreoffice-sdk 4.2.5-1
libreoffice-sdk-doc 4.2.5-1
libreoffice-writer 4.2.5-1
librsvg 1:2.40.2-1
libsamplerate 0.1.8-3
libsasl 2.1.26-7
libseccomp 2.1.1-1
libsecret 0.18-1
libshout 1:2.3.1-2
libsidplay 1.36.59-6
libsigc++ 2.3.1-2
libsm 1.2.2-2
libsndfile 1.0.25-3
libsodium 0.6.1-1
libsoup 2.46.0-1
libspectre 0.2.7-2
libspiro 1:0.2-1
libsrtp 15.1c9bd90-3
libssh 0.6.3-1
libssh2 1.4.3-2
libsystemd 215-4
libtar 1.2.20-1
libtasn1 4.0-1
libthai 0.1.19-1
libtheora 1.1.1-3
libtiff 4.0.3-4
libtiger 0.3.4-4
libtirpc 0.2.4-1
libtool 2.4.2-14
libtracker-sparql 1.0.2-1
libturpial-git 1.7.0.564.c3ec1dc-1
libtxc_dxtn 1.0.1-5
libunicodenames 1.1.0_beta1-1
libunique 1.1.6-6
libunistring 0.9.3-6
libupnp 1.6.19-1
libusb 1.0.19-1
libusb-compat 0.1.5-1
libusbmuxd 1.0.9-1
libutempter 1.1.6-2
libutil-linux 2.24.2-1
libva 1.3.1-2
libvdpau 0.8-1
libvisual 0.4.0-5
libvncserver 0.9.9-3
libvorbis 1.3.4-1
libvpx 1.3.0-1
libwbclient 4.1.9-1
libwebp 0.4.0-2
libwmf 0.2.8.4-12
libwnck 2.30.7-2
libx11 1.6.2-2
libx264 1:142.20140311-4
libxau 1.0.8-2
libxaw 1.0.12-1
libxcb 1.10-3
libxcomposite 0.4.4-2
libxcursor 1.1.14-2
libxdamage 1.1.4-2
libxdmcp 1.1.1-2
libxext 1.3.3-1
libxfce4ui 4.10.0-2
libxfce4util 4.10.1-2
libxfcegui4 4.10.0-2
libxfixes 5.0.1-1
libxfont 1.4.7-3
libxft 2.3.2-1
libxi 1.7.4-1
libxinerama 1.1.3-2
libxkbcommon 0.4.2-1
libxkbcommon-x11 0.4.2-1
libxkbfile 1.0.8-2
libxkbui 1.0.2-5
libxklavier 5.4-1
libxml-perl 0.08-6
libxml2 2.9.1-5
libxmu 1.1.2-1
libxpm 3.5.11-1
libxrandr 1.4.2-2
libxrender 0.9.8-1
libxres 1.0.7-1
libxshmfence 1.1-1
libxslt 1.1.28-3
libxss 1.2.2-2
libxt 1.1.4-1
libxtst 1.2.2-1
libxv 1.0.10-1
libxvmc 1.0.8-1
libxxf86dga 1.1.4-1
libxxf86vm 1.1.3-1
libyaml 0.1.6-1
libytnef 1.5-4
licenses 20140629-1
links 2.8-1
linux 3.15.5-2
linux-api-headers 3.14.1-1
linux-firmware 20140603.a4f3bc0-1
linux-headers 3.15.5-2
lirc-utils 1:0.9.0-74
live-usb-install 2.5.2-2
llvm-libs 3.4.2-1
lm_sensors 3.3.5-1
logrotate 3.8.7-3
lpsolve 5.5.2.0-3
lsof 4.87-2
lua 5.2.3-1
lvm2 2.02.106-2
lzo2 2.08-1
m4 1.4.17-1
make 4.0-2
man-db 2.6.7.1-1
man-pages 3.70-1
mariadb 10.0.12-2
mariadb-clients 10.0.12-2
masterpdfeditor 1.9.25-2
mcpp 2.7.2-5
mdadm 3.3.1-2
media-player-info 19-1
mesa 10.2.4-1
mesa-demos 8.2.0-1
mesa-libgl 10.2.4-1
metacity 2.34.13-7
mime-types 9-1
mjpegtools 2.1.0-1
mkinitcpio 17-1
mkinitcpio-busybox 1.21.1-2
mlt-git v0.9.2.r15.g04ef766-1
mobile-broadband-provider-info 20120614-2
moka-icons-git 312.b2d1642-1
mono 3.4.0-1
mono-addins 1.1-1
monodevelop 5.0.1-1
movit 1.1.1-1
mozilla-common 1.4-4
mpfr 3.1.2.p10-1
mpg123 1.20.0-1
mplayer 37224-1
mtdev 1.1.5-1
mtools 4.0.18-2
musicbrainz 2.1.5-6
mutagen 1.23-1
nano 2.2.6-3
nasm 2.11.05-1
nautilus 3.12.2-1
nautilus-sendto 3.8.1-1
ncdu 1.10-1
ncurses 5.9-6
neon 0.30.0-1
net-tools 1.60.20130531git-1
netctl 1.8-1
nettle 2.7.1-1
network-manager-applet 0.9.8.10-1
networkmanager 0.9.8.10-3
networkmanager-openconnect 0.9.8.6-1
networkmanager-openvpn 0.9.8.4-1
networkmanager-pptp 0.9.8.4-2
networkmanager-vpnc 0.9.8.6-1
notify-sharp 0.4.1-1
nouveau-dri 10.2.4-1
nspr 4.10.6-1
nss 3.16.3-1
ntfs-3g 2014.2.15-1
ntp 4.2.7.p446-1
nvidia 340.24-1
nvidia-cg-toolkit 3.1-3
nvidia-utils 340.24-1
openal 1.15.1-2
opencl-nvidia-beta 340.24-1
openconnect 1:5.03-1
opencore-amr 0.1.3-2
opencv 2.4.9-1
openexr 2.1.0-1
openjpeg 1.5.2-1
openresolv 3.5.6-1
openssh 6.6p1-2
openssl 1.0.1.h-1
openvpn 2.3.4-1
optipng 0.7.5-1
opus 1.1-1
orage 4.10.0-1
orbit2 2.14.19-3
orc 0.4.19-1
os-prober 1.58-1
oxygen-icons 4.13.3-1
p11-kit 0.20.2-1
p7zip 9.20.1-9
package-query 1.4-1
packer 20140103-1
packer-color 20130730-1
pacman 4.1.2-6
pacman-mirrorlist 20140706-1
pam 1.1.8-5
pambase 20130928-1
pango 1.36.5-1
pango-perl 1.226-1
pangomm 2.34.0-1
pangox-compat 0.0.2-2
parted 3.1-4
patch 2.7.1-3
pavucontrol 2.0-2
pciutils 3.2.1-1
pcmciautils 018-7
pcre 8.35-1
pcsclite 1.8.11-1
pcsx2 1.2.2-2
perl 5.20.0-5
perl-bit-vector 7.3-2
perl-capture-tiny 0.24-1
perl-carp-clan 6.04-3
perl-class-accessor 0.34-4
perl-class-data-inheritable 0.08-6
perl-common-sense 3.73-1
perl-data-optlist 0.109-2
perl-data-random 0.11-2
perl-date-calc 6.3-3
perl-devel-checkcompiler 0.05-1
perl-devel-symdump 2.11-1
perl-digest-hmac 1.03-3
perl-digest-sha1 2.13-5
perl-encode-locale 1.03-2
perl-error 0.17022-1
perl-extutils-config 0.007-2
perl-extutils-depends 0.308-1
perl-extutils-helpers 0.022-2
perl-extutils-installpaths 0.010-2
perl-extutils-pkgconfig 1.15-1
perl-file-basedir 0.03-6
perl-file-copy-recursive 0.38-1
perl-file-listing 6.04-2
perl-file-slurp-tiny 0.003-2
perl-file-which 1.09-4
perl-gd 2.53-2
perl-gnome2-wnck 0.16-9
perl-goo-canvas 0.06-4
perl-gtk2-appindicator 0.15-2
perl-gtk2-imageview 0.05-4
perl-gtk2-unique 0.05-10
perl-html-form 6.03-2
perl-html-parser 3.71-3
perl-html-tagset 3.20-4
perl-http-cookies 6.01-2
perl-http-daemon 6.01-2
perl-http-date 6.02-2
perl-http-message 6.06-2
perl-http-negotiate 6.01-2
perl-http-response-encoding 0.06-3
perl-http-server-simple 0.44-2
perl-image-exiftool 9.60-1
perl-io-socket-ssl 1.997-1
perl-io-string 1.08-9
perl-json 2.90-1
perl-json-xs 3.01-3
perl-libwww 6.08-1
perl-locale-gettext 1.05-11
perl-lwp-mediatypes 6.02-2
perl-lwp-protocol-https 6.04-1
perl-module-build-tiny 0.036-2
perl-module-build-xsutil 0.10-1
perl-mouse 2.3.0-1
perl-mozilla-ca 20130114-2
perl-net-dbus 1.0.0-4
perl-net-dropbox-api 1.9-3
perl-net-http 6.07-1
perl-net-oauth 0.28-4
perl-net-ssleay 1.63-2
perl-params-util 1.07-3
perl-path-class 0.33-1
perl-pod-coverage 0.23-1
perl-proc-processtable 0.50-3
perl-proc-simple 1.31-3
perl-sort-naturally 1.03-1
perl-sub-exporter 0.987-1
perl-sub-install 0.927-1
perl-sub-uplevel 0.24-2
perl-test-deep 0.112-1
perl-test-exception 0.32-2
perl-test-fatal 0.013-1
perl-test-leaktrace 0.14-2
perl-test-nowarnings 1.04-2
perl-test-output 1.03-1
perl-test-pod 1.48-1
perl-test-pod-coverage 1.10-1
perl-test-requires 0.07-1
perl-test-tester 0.109-1
perl-test-warn 0.30-1
perl-text-iconv 1.7-9
perl-tree-dag-node 1.22-2
perl-try-tiny 0.22-1
perl-types-serialiser 1.0-1
perl-uri 1.64-1
perl-www-mechanize 1.73-1
perl-www-robotrules 6.02-2
perl-x11-protocol 0.56-6
perl-xml-libxml 2.0116-2
perl-xml-namespacesupport 1.11-3
perl-xml-parser 2.41-5
perl-xml-sax 0.99-4
perl-xml-sax-base 1.08-3
perl-xml-simple 2.20-2
perl-xml-twig 3.48-1
perl-yaml-tiny 1.62-2
phonon-qt4 4.7.2-1
phonon-qt4-gstreamer 4.7.2-1
phonon-qt5 4.7.2-1
phonon-qt5-gstreamer 4.7.2-1
photorecover 0.9.0-1
php 5.5.15-1
php-apache 5.5.15-1
pia-tools 0.9.7.1-1
pidgin 2.10.9-2
pidgin-otr 4.0.0-2
pinentry 0.8.3-1
pixman 0.32.6-1
pkg-config 0.28-2
pngcrush 1.7.75-1
polkit 0.112-2
polkit-kde 0.99.0-3
polkit-qt4 0.112-1
polkit-qt5 0.112-1
poppler 0.26.3-1
poppler-glib 0.26.3-1
popt 1.16-7
portaudio 19_20140130-1
portmidi 217-5
postgresql 9.3.5-1
postgresql-libs 9.3.5-1
poweriso 1.3-4
ppp 2.4.6-2
pptpclient 1.8.0-2
presentproto 1.0-1
primus 20131226-1
prison 1.1.1-1
procps-ng 3.3.9-3
progsreiserfs 0.3.0.5-8
proot 3.2.2-1
protobuf 2.5.0-4
psmisc 22.21-2
pth 2.0.7-5
pulseaudio 5.0-1
pygobject-devel 3.12.2-1
pygobject2-devel 2.28.6-10
pygtk 2.24.0-4
pyqt4-common 4.11.1-1
pyrex 0.9.9-4
python 3.4.1-1
python-cairo 1.10.0-4
python-dbus 1.2.0-3
python-dbus-common 1.2.0-3
python-distutils-extra 2.38-2
python-gobject 3.12.2-1
python-xdg 0.25-2
python2 2.7.8-1
python2-babel 1.3-4
python2-beaker 1.6.4-2
python2-beautifulsoup4 4.3.2-2
python2-cairo 1.10.0-2
python2-configobj 5.0.5-1
python2-dbus 1.2.0-3
python2-distutils-extra 2.38-2
python2-exiv2 0.3.2-3
python2-gconf 2.28.1-9
python2-gobject 3.12.2-1
python2-gobject2 2.28.6-10
python2-gtkspell 2.25.3-13
python2-gudev 147.2-5
python2-httplib2 0.9-2
python2-jinja 2.7.3-1
python2-keybinder2 0.3.0-2
python2-lxml 3.3.5-1
python2-mako 1.0.0-1
python2-markupsafe 0.23-1
python2-notify 0.1.1-13
python2-oauth 1.0.1-3
python2-pillow 2.5.1-1
python2-pycurl 7.19.5-1
python2-pygame 1.9.1-8
python2-pyqt4 4.11.1-1
python2-pyside 1.2.1-2
python2-pytz 2014.4-1
python2-requests 2.3.0-1
python2-rsvg 2.32.0-15
python2-setuptools 1:5.4.1-1
python2-simplejson 3.4.0-1
python2-sip 4.16.2-1
python2-six 1.7.3-1
pywebkitgtk 1.1.8-3
qca 2.0.3-5
qca-ossl 2.0.0-7
qimageblitz 0.0.6-4
qjson 0.8.1-3
qpdf 5.1.2-1
qrencode 3.4.4-1
qt4 4.8.6-1
qt5-base 5.3.1-1
qt5-declarative 5.3.1-1
qt5-location 5.3.1-1
qt5-quick1 5.3.1-1
qt5-quickcontrols 5.3.1-1
qt5-script 5.3.1-1
qt5-sensors 5.3.1-1
qt5-svg 5.3.1-1
qt5-tools 5.3.1-1
qt5-translations 5.3.1-1
qt5-webkit 5.3.1-1
qt5-x11extras 5.3.1-1
qt5-xmlpatterns 5.3.1-1
qtchooser 41-1
qtcreator 3.1.2-1
qtwebkit 2.3.3-1
randrproto 1.4.0-2
raptor 2.0.13-2
rarian 0.8.1-4
rasqal 1:0.9.32-1
rdesktop 1.8.2-1
readline 6.3.006-1
recode 3.6-8
recordmydesktop 0.3.8.1-7
recordproto 1.14.2-2
redland 1:1.0.17-2
regetron 1.4-1
regex 1.0c.rev40-1
reiserfsprogs 3.6.24-1
remmina 1.0.0-12
remmina-plugin-rdesktop 1.0.0.3-1
renderproto 0.11.1-3
resourceproto 1.2.0-3
rest 0.7.91-1
ristretto 0.6.3-4
rpmextract 1.0-6
rsvg2-sharp 2.26.0-10
rsync 3.1.1-2
rtkit 0.11-4
rtmpdump 20131205-1
ruby 2.1.2-1
ruby1.9 1.9.3_p547-3
ruby1.9-bundler 1.6.3-1
run-parts 4.4-1
s-nail 14.7.4-1
samba 4.1.9-1
sbc 1.2-1
schroedinger 1.0.11-2
screenfetch 3.2.2-1
scrnsaverproto 1.2.2-2
sdl 1.2.15-6
sdl2 2.0.3-1
sdl2_image 2.0.0-2
sdl_image 1.2.12-3
sdl_mixer 1.2.12-4
sdl_net 1.2.8-2
sdl_sound 1.0.3-5
sdl_ttf 2.0.11-3
sed 4.2.2-3
serf 1.3.6-1
sg3_utils 1.39-1
shadow 4.2.1-1
shared-mime-info 1.3-1
shiboken 1.2.1-4
shutter 0.91-2
sip 4.16.2-1
skype 4.3.0.37-3
smaragd-git 20130504-1
smbclient 4.1.9-1
smpeg 0.4.5-1
snappy 1.1.1-1
solid 5.0.0-1
sonnet 5.0.0-1
sound-theme-freedesktop 0.8-2
soundtouch 1.8.0-1
source-highlight 3.1.7-9
sox 14.4.1-4
spandsp 0.0.6pre21-2
speech-dispatcher 0.8-3
speex 1.2rc1-4
spotify 0.9.10.17-1
sqlite 3.8.5-1
startup-notification 0.12-4
steam 1.0.0.47-2
strace 4.8-1
strigi 0.7.8-5
sublime-text-dev 3.3059-1
subversion 1.8.9-2
sudo 1.8.10.p3-1
sysfsutils 2.1.0-9
syslinux 6.03pre18-1
systemd 215-4
systemd-sysvcompat 215-4
t1lib 5.1.2-5
taglib 1.9.1-1
talloc 2.1.1-1
tangerine-icon-theme 0.27-2
tar 1.27.1-1
tcl 8.6.1-1
tdb 1.2.12-1
telepathy-glib 0.24.0-1
terminator 0.97-2
terminus-font 4.39-1
testdisk 6.14-2
tevent 0.9.21-3
texinfo 5.2-2
thunar 1.6.3-1
thunar-volman 0.8.0-2
thunderbird 31.0-1
tk 8.6.1-1
tor-browser-en 3.6.2-2
totem-plparser 3.10.2-1
transmission-cli 2.84-1
transmission-gtk 2.84-1
trimage-git 20130126-1
ttf-dejavu 2.34-1
ttf-google-fonts-git 20140512-1
ttf-ms-fonts 2.0-10
tumbler 0.1.30-1
turpial-git 3.0.1642.5f269f4-1
tzdata 2014e-1
udisks 1.0.5-1
udisks2 2.1.3-1
ufw 0.33-3
unrar 1:5.1.6-1
unzip 6.0-7
upower 0.99.0-2
usb-creator 0.2.59-1
usbutils 007-1
util-linux 2.24.2-1
v4l-utils 1.2.1-1
vala 0.24.0-1
variety 0.4.19-1
vi 1:050325-4
vid.stab 0.98b-2
videoproto 2.3.2-1
vim 7.4.373-1
vim-runtime 7.4.373-1
virtualbox 4.3.14-1
virtualbox-guest-iso 4.3.14-1
virtualbox-host-dkms 4.3.14-1
virtualbox-host-modules 4.3.14-1
virtualgl 2.3.3-1
vlc 2.1.5-1
vpnc 0.5.3.svn527-2
vte 0.28.2-4
vte-common 0.36.3-1
vte3 0.36.3-1
wavpack 4.70.0-2
wayland 1.5.0-1
webkitgtk 2.4.4-1
webkitgtk2 2.4.4-1
webrtc-audio-processing 0.1-2
wee-buzzer 20120130:1.1-1
weechat 0.4.3-2
weevely 1.1-2
wget 1.15-1
which 2.20-7
whois 5.1.3-1
wildmidi 0.3.6-1
wine 1.7.23-1
winetricks 20140302-1
wireshark-cli 1.10.8-1
wireshark-gtk 1.10.8-1
wnck-sharp 2.26.0-10
wpa_supplicant 2.1-3
wxgtk2.8 2.8.12.1-1
x264 1:142.20140311-4
x265 1.2-1
xbitmaps 1.1.1-3
xcb-proto 1.10-2
xcb-util 0.3.9-2
xcb-util-image 0.3.9-2
xcb-util-keysyms 0.3.9-2
xcb-util-renderutil 0.3.9-1
xcb-util-wm 0.4.1-1
xdg-utils 1.1.0.git20140630-1
xerces-c 3.1.1-5
xextproto 7.3.0-1
xf86-input-evdev 2.9.0-1
xf86-input-joystick 1.6.2-3
xf86-input-keyboard 1.8.0-2
xf86-input-mouse 1.9.0-2
xf86-input-synaptics 1.8.0-1
xf86-input-vmmouse 13.0.0-3
xf86-input-void 1.4.0-6
xf86-video-ark 0.7.5-4
xf86-video-ast 0.97.0-4
xf86-video-cirrus 1.5.2-3
xf86-video-dummy 0.3.7-2
xf86-video-fbdev 0.4.4-2
xf86-video-glint 1.2.8-4
xf86-video-i128 1.3.6-4
xf86-video-intel 2.99.912-2
xf86-video-mach64 6.9.4-3
xf86-video-mga 1.6.3-2
xf86-video-modesetting 0.9.0-1
xf86-video-neomagic 1.2.8-2
xf86-video-nouveau 1.0.10-2
xf86-video-nv 2.1.20-4
xf86-video-openchrome 0.3.3-3
xf86-video-r128 6.9.2-2
xf86-video-savage 2.3.7-2
xf86-video-siliconmotion 1.7.7-4
xf86-video-sis 0.10.7-5
xf86-video-tdfx 1.4.5-4
xf86-video-trident 1.3.6-5
xf86-video-v4l 0.2.0-13
xf86-video-vesa 2.3.2-4
xf86-video-voodoo 1.2.5-4
xf86dgaproto 2.1-3
xf86driproto 2.1.1-3
xf86vidmodeproto 2.3.1-3
xfce4-appfinder 4.10.1-1
xfce4-datetime-plugin 0.6.2-2
xfce4-mixer 4.10.0-2
xfce4-notes-plugin 1.7.7-5
xfce4-notifyd 0.2.4-1
xfce4-panel 4.10.1-1
xfce4-power-manager 1.2.0.212.g75107db-1
xfce4-remmina-plugin 0.8.1-2
xfce4-session 4.10.1-3
xfce4-settings 4.10.1-1
xfce4-terminal 0.6.3-1
xfconf 4.10.0-4
xfdesktop 4.10.2-2
xfsprogs 3.2.0-1
xfwm4 4.10.1-1
xfwm4-themes 4.10.0-2
xine-lib 1.2.6-1
xineramaproto 1.2.1-3
xkeyboard-config 2.12-1
xorg-bdftopcf 1.0.4-2
xorg-docs 1.7-2
xorg-font-util 1.3.0-2
xorg-font-utils 7.6-4
xorg-fonts-100dpi 1.0.1-5
xorg-fonts-75dpi 1.0.3-1
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-4
xorg-fonts-misc 1.0.1-3
xorg-iceauth 1.0.6-1
xorg-luit 1.1.1-2
xorg-mkfontdir 1.0.7-2
xorg-mkfontscale 1.1.1-1
xorg-server 1.15.2-1
xorg-server-common 1.15.2-1
xorg-server-devel 1.15.2-1
xorg-server-utils 7.6-4
xorg-server-xephyr 1.15.2-1
xorg-sessreg 1.0.8-2
xorg-setxkbmap 1.3.0-2
xorg-smproxy 1.0.5-2
xorg-twm 1.0.8-2
xorg-util-macros 1.19.0-1
xorg-utils 7.6-9
xorg-x11perf 1.5.4-2
xorg-xauth 1.0.9-1
xorg-xbacklight 1.2.1-1
xorg-xclock 1.0.7-1
xorg-xcmsdb 1.0.4-2
xorg-xcursorgen 1.0.6-1
xorg-xdpyinfo 1.3.1-1
xorg-xdriinfo 1.0.4-4
xorg-xev 1.2.1-2
xorg-xgamma 1.0.5-2
xorg-xhost 1.0.6-1
xorg-xinit 1.3.3-3
xorg-xinput 1.6.1-1
xorg-xkbcomp 1.2.4-2
xorg-xkbevd 1.1.3-2
xorg-xkbutils 1.0.4-2
xorg-xkill 1.0.4-1
xorg-xlsatoms 1.1.1-2
xorg-xlsclients 1.1.3-1
xorg-xmessage 1.0.4-2
xorg-xmodmap 1.0.8-1
xorg-xpr 1.0.4-2
xorg-xprop 1.2.2-1
xorg-xrandr 1.4.2-1
xorg-xrdb 1.1.0-1
xorg-xrefresh 1.0.5-1
xorg-xset 1.2.3-1
xorg-xsetroot 1.1.1-2
xorg-xvinfo 1.1.2-2
xorg-xwd 1.0.6-1
xorg-xwininfo 1.1.3-1
xorg-xwud 1.0.4-2
xproto 7.0.26-1
xterm 309-1
xvidcore 1.3.3-1
xz 5.0.5-2
yajl 2.1.0-1
yaourt 1.5-1
yelp 3.12.0-1
yelp-xsl 3.12.0-1
zekr 1.1.0-2
zenity 3.12.1-1
zeromq 4.0.4-3
zip 3.0-4
zlib 1.2.8-3
zsnes 1.51-17
zvbi 0.2.33-6
removed arch-assault to recieve help on pure Arch, thank you for showing me in the rules admin
Appreciate the help.
Last edited by mrbeard (2014-07-28 04:31:57)

mrbeard wrote:archassault-keyring 20140202-3
archassault-mirrorlist 20140527-1
Closing: https://wiki.archlinux.org/index.php/Fo … pport_ONLY

[solved]black screen with xorg 1.6 after resume (intel)

after upgrading to xorg-server 1.6 no matter if i use s2ram or s2disk, first resume works fine, the second suspend and resume results in a black screen without any chance to swich to any tty.
i have read about bug like this which was resolved with using intel legacy driver. however my problem still occures.
maybe there is some module i should load/unload/reload on hibernate/wake-up?
here is my xorg.conf, lspci, Xorg.0.log.old (the one i had to kill with black screen) and Xorg.0.log
xorg.conf
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "DontZap" "false"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Cursor" "SendCoreEvents"
InputDevice "Stylus" "SendCoreEvents"
InputDevice "Eraser" "SendCoreEvents"
EndSection
Section "InputDevice"
Identifier "Cursor"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "Mode" "Absolute"
Option "BottomY" "18432"
Option "BottomX" "24576"
EndSection
Section "InputDevice"
Identifier "Stylus"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "TPCButton" "off"
Option "BottomY" "18432"
Option "BottomX" "24576"
Option "Mode" "Absolute"
EndSection
Section "InputDevice"
Identifier "Eraser"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "BottomY" "18432"
Option "BottomX" "24576"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "xtrap"
Load "dbe"
Load "dri"
Load "glx"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "base"
Option "XkbModel" "pc105"
Option "XkbLayout" "de, ru"
Option "XkbVariant" "nodeadkeys, winkeys"
Option "XkbOptions" "grp:caps_toggle"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
Option "FramebufferCompression" "on"
Option "AccelMethod" "EXA"
Option "Tiling" "on"
Option "TrippleBuffer" "true"
Option "MigrationHeuristic" "greedy"
Option "RenderAccel" "true"
Option "ExaNoComposite" "false"
Option "EnablePageFlip" "true"
Option "DRI" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "dri"
Mode 0666
EndSection
lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
04:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
04:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)
Xorg.0.log
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 10 April 2009 07:03:14PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:54 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Cursor"
(**) |-->Input Device "Stylus"
(**) |-->Input Device "Eraser"
(**) Option "DontZap" "false"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/local,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "EXA"
(**) intel(0): Option "DRI" "on"
(**) intel(0): Option "FramebufferCompression" "on"
(**) intel(0): Option "Tiling" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xA0080000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(II) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 363776 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1455100 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xa0080000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
(II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
(II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
(II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(**) intel(0): Option "EXANoComposite" "false"
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
(II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
(II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
(II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "TrippleBuffer" is not used
(WW) intel(0): Option "RenderAccel" is not used
(WW) intel(0): Option "EnablePageFlip" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "de, ru"
(**) Keyboard0: XkbLayout: "de, ru"
(**) Option "XkbVariant" "nodeadkeys, winkeys"
(**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
(**) Option "XkbOptions" "grp:caps_toggle"
(**) Keyboard0: XkbOptions: "grp:caps_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(**) Option "SendCoreEvents"
(**) Cursor: always reports core events
(**) Cursor device is /dev/ttyS0
(**) Cursor is in absolute mode
(**) Cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Cursor: keeps shape
(**) Option "BottomX" "24576"
(**) Cursor: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Cursor: bottom y = 18432
(**) Option "BaudRate" "9600"
(**) Cursor: serial speed 9600
(II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
(**) Option "Device" "/dev/ttyS0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Stylus: always reports core events
(**) Stylus device is /dev/ttyS0
(**) Stylus is in absolute mode
(**) Stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Stylus: keeps shape
(**) Option "BottomX" "24576"
(**) Stylus: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Stylus: bottom y = 18432
(**) Stylus: threshold = 15
(**) Stylus: max x set to 24576 by xorg.conf
(**) Stylus: max y set to 18432 by xorg.conf
(**) Stylus: max z = 255
(**) Option "TPCButton" "off"
(**) Option "BaudRate" "9600"
(**) Stylus: serial speed 9600
(II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
(==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Eraser: always reports core events
(**) Eraser device is /dev/ttyS0
(**) Eraser is in absolute mode
(**) Eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Eraser: keeps shape
(**) Option "BottomX" "24576"
(**) Eraser: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Eraser: bottom y = 18432
(**) Eraser: threshold = 15
(**) Eraser: max x set to 24576 by xorg.conf
(**) Eraser: max y set to 18432 by xorg.conf
(**) Eraser: max z = 255
(**) Option "BaudRate" "9600"
(**) Eraser: serial speed 9600
(II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
(==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(II) config/hal: Adding input device ThinkPad Extra Buttons
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Video Bus
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
Xorg.0.log.old
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 10 April 2009 07:03:14PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:40 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Cursor"
(**) |-->Input Device "Stylus"
(**) |-->Input Device "Eraser"
(**) Option "DontZap" "false"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/local,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "EXA"
(**) intel(0): Option "DRI" "on"
(**) intel(0): Option "FramebufferCompression" "on"
(**) intel(0): Option "Tiling" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xA0080000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(II) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0c00
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 363776 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1455100 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xa0080000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
(II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
(II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
(II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(**) intel(0): Option "EXANoComposite" "false"
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
(II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
(II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
(II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "TrippleBuffer" is not used
(WW) intel(0): Option "RenderAccel" is not used
(WW) intel(0): Option "EnablePageFlip" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "de, ru"
(**) Keyboard0: XkbLayout: "de, ru"
(**) Option "XkbVariant" "nodeadkeys, winkeys"
(**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
(**) Option "XkbOptions" "grp:caps_toggle"
(**) Keyboard0: XkbOptions: "grp:caps_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(**) Option "SendCoreEvents"
(**) Cursor: always reports core events
(**) Cursor device is /dev/ttyS0
(**) Cursor is in absolute mode
(**) Cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Cursor: keeps shape
(**) Option "BottomX" "24576"
(**) Cursor: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Cursor: bottom y = 18432
(**) Option "BaudRate" "9600"
(**) Cursor: serial speed 9600
(II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
(**) Option "Device" "/dev/ttyS0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Stylus: always reports core events
(**) Stylus device is /dev/ttyS0
(**) Stylus is in absolute mode
(**) Stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Stylus: keeps shape
(**) Option "BottomX" "24576"
(**) Stylus: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Stylus: bottom y = 18432
(**) Stylus: threshold = 15
(**) Stylus: max x set to 24576 by xorg.conf
(**) Stylus: max y set to 18432 by xorg.conf
(**) Stylus: max z = 255
(**) Option "TPCButton" "off"
(**) Option "BaudRate" "9600"
(**) Stylus: serial speed 9600
(II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
(==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Eraser: always reports core events
(**) Eraser device is /dev/ttyS0
(**) Eraser is in absolute mode
(**) Eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Eraser: keeps shape
(**) Option "BottomX" "24576"
(**) Eraser: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Eraser: bottom y = 18432
(**) Eraser: threshold = 15
(**) Eraser: max x set to 24576 by xorg.conf
(**) Eraser: max y set to 18432 by xorg.conf
(**) Eraser: max z = 255
(**) Option "BaudRate" "9600"
(**) Eraser: serial speed 9600
(II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
(==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8079000 at 0xb78f7000
(II) intel(0): [drm] Closed DRM master.
anyone clue?
Last edited by lynucs (2009-05-09 18:38:01)

took a look into everything.log.
that line looks pretty suspicious:
kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
it occures around the time i did the last resume.
here is a relevant snippet from everything.log:
Apr 14 18:35:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:35:58 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:36:00 thinky acpid: client connected from 9040[0:0]
Apr 14 18:36:00 thinky acpid: 1 client rule loaded
Apr 14 18:38:04 thinky ntpd[6265]: adjusting local clock by -87.862975s
Apr 14 18:42:04 thinky ntpd[6265]: adjusting local clock by -87.769493s
Apr 14 18:42:55 thinky acpid: client 6223[0:0] has disconnected
Apr 14 18:42:55 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
Apr 14 18:42:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:43:07 thinky kernel: PM: Syncing filesystems ... done.
Apr 14 18:43:07 thinky kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
Apr 14 18:43:07 thinky kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Apr 14 18:43:07 thinky kernel: Suspending console(s) (use no_console_suspend to debug)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D3
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Stopping disk
Apr 14 18:43:07 thinky kernel: serial 00:09: disabled
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PME# disabled
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B disabled
Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# enabled
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ACPI: Preparing to enter system sleep state S3
Apr 14 18:43:07 thinky kernel: Disabling non-boot CPUs ...
Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
Apr 14 18:43:07 thinky kernel: Intel machine check architecture supported.
Apr 14 18:43:07 thinky kernel: Intel machine check reporting enabled on CPU#0.
Apr 14 18:43:07 thinky kernel: Back to C!
Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
Apr 14 18:43:07 thinky kernel: Force enabled HPET at resume
Apr 14 18:43:07 thinky kernel: ------------[ cut here ]------------
Apr 14 18:43:07 thinky kernel: WARNING: at kernel/hrtimer.c:625 hres_timers_resume+0x41/0x50()
Apr 14 18:43:07 thinky kernel: Hardware name: 1866WBA
Apr 14 18:43:07 thinky kernel: hres_timers_resume() called with IRQs enabled!Modules linked in: ipv6 aes_i586 aes_generic i915 drm i2c_algo_bit ext2 pcmcia psmouse thinkpad_acpi rfkill nvram i2c_i801 serio_raw iTCO_wdt iTCO_vendor_support i2c_core sg yenta_socket rsrc_nonstatic sdhci_pci sdhci pcmcia_core mmc_core video output uhci_hcd ehci_hcd usbcore intel_agp agpgart evdev thermal fan button battery ac fuse snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ath_pci wlan ath_hal(P) arc4 ecb ath5k mac80211 led_class cfg80211 tg3 libphy cpufreq_powersave cpufreq_ondemand cpufreq_conservative acpi_cpufreq freq_table processor rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sd_mod ata_piix ahci ata_generic pata_acpi libata scsi_mod
Apr 14 18:43:07 thinky kernel: Pid: 9512, comm: s2ram Tainted: P 2.6.29-ARCH #1
Apr 14 18:43:07 thinky kernel: Call Trace:
Apr 14 18:43:07 thinky kernel: [<c012f9d7>] warn_slowpath+0x87/0xe0
Apr 14 18:43:07 thinky kernel: [<c011ec25>] default_spin_lock_flags+0x5/0x10
Apr 14 18:43:07 thinky kernel: [<c01164d0>] lapic_next_event+0x10/0x20
Apr 14 18:43:07 thinky kernel: [<c01500e3>] clockevents_program_event+0xa3/0x170
Apr 14 18:43:07 thinky kernel: [<c0151312>] tick_dev_program_event+0x32/0xb0
Apr 14 18:43:07 thinky kernel: [<c0150447>] tick_notify+0x97/0x3c0
Apr 14 18:43:07 thinky kernel: [<c01491a6>] notifier_call_chain+0x36/0x70
Apr 14 18:43:07 thinky kernel: [<c0147ea1>] hres_timers_resume+0x41/0x50
Apr 14 18:43:07 thinky kernel: [<c014cc3a>] timekeeping_resume+0x11a/0x140
Apr 14 18:43:07 thinky kernel: [<c0299d91>] __sysdev_resume+0x11/0x50
Apr 14 18:43:07 thinky kernel: [<c0299e0f>] sysdev_resume+0x3f/0x70
Apr 14 18:43:07 thinky kernel: [<c015b410>] suspend_devices_and_enter+0x160/0x190
Apr 14 18:43:07 thinky kernel: [<c015bb7f>] freeze_processes+0x4f/0xa0
Apr 14 18:43:07 thinky kernel: [<c015b58a>] enter_state+0xfa/0x150
Apr 14 18:43:07 thinky kernel: [<c015b674>] state_store+0x94/0xd0
Apr 14 18:43:07 thinky kernel: [<c015b5e0>] state_store+0x0/0xd0
Apr 14 18:43:07 thinky kernel: [<c0224a74>] kobj_attr_store+0x24/0x30
Apr 14 18:43:07 thinky kernel: [<c01f3351>] sysfs_write_file+0xa1/0x100
Apr 14 18:43:07 thinky kernel: [<c01f32b0>] sysfs_write_file+0x0/0x100
Apr 14 18:43:07 thinky kernel: [<c01a8df0>] vfs_write+0xa0/0x160
Apr 14 18:43:07 thinky kernel: [<c01a8f81>] sys_write+0x41/0x80
Apr 14 18:43:07 thinky kernel: [<c0103ea3>] sysenter_do_call+0x12/0x2f
Apr 14 18:43:07 thinky kernel: ---[ end trace 2b9e3dc85bad025f ]---
Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x68000000)
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xa0211000)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: restoring config space at offset 0x3 (was 0x5008, writing 0xa808)
Apr 14 18:43:07 thinky kernel: ACPI: Waking up from system sleep state S3
Apr 14 18:43:07 thinky kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PME# disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: PME# disabled
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb2: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb3: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb4: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb5: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:1e.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# disabled
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Apr 14 18:43:07 thinky kernel: serial 00:09: activated
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Starting disk
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
Apr 14 18:43:07 thinky kernel: ata1: EH complete
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 14 18:43:07 thinky kernel: usb 4-2: reset full speed USB device using uhci_hcd and address 2
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: Restarting tasks ... done.
Apr 14 18:43:07 thinky acpid: client 9040[0:0] has disconnected
Apr 14 18:43:07 thinky logger: ACPI group/action undefined: processor / CPU
Apr 14 18:43:07 thinky acpid: client connected from 9040[0:0]
Apr 14 18:43:07 thinky acpid: 1 client rule loaded
Apr 14 18:43:08 thinky dhcpcd[7651]: wlan0: carrier lost
Apr 14 18:43:08 thinky kernel: wlan0: deauthenticating by local choice (reason=14)
Apr 14 18:43:08 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
Apr 14 18:43:09 thinky kernel: ath5k phy0: noise floor calibration timeout (2452MHz)
Apr 14 18:43:13 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
Apr 14 18:43:13 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:13 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:13 thinky kernel: wlan0: authenticated
Apr 14 18:43:13 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:13 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:14 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 2
Apr 14 18:43:14 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:14 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:14 thinky kernel: wlan0: authenticated
Apr 14 18:43:14 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:14 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:15 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 3
Apr 14 18:43:15 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:15 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:15 thinky kernel: wlan0: authenticated
Apr 14 18:43:15 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:15 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:16 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b timed out
Apr 14 18:43:19 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
Apr 14 18:43:19 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 19:27:27 thinky syslog-ng[5106]: syslog-ng starting up; version='3.0.1'
Apr 14 19:27:27 thinky kernel: Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
Apr 14 19:27:27 thinky kernel: KERNEL supported cpus:
Apr 14 19:27:27 thinky kernel: Intel GenuineIntel

Photoshop CC only detects Intel GPU instead of AMD Radeon (Win8)

Hi,
I am running a pc with Win 8 and Intel i7-3630QM CPU.
On my system I am running 2 Video Cards, both Intel HD Graphics 4000 and AMD Radeon HD 7670M.
I set my switchable cards to high performance when using photoshop.exe, but when I check in PS Preferences, the detected Graphic Processor is Intel HD 4000.
How can I set my AMD radeon for higher performances?
Thanks
Cecilia

With dual-GPU's, it is often necessary to disable the Intel GPU, usually in the computer's BIOS.
Many laptops have dual GPU's, to allow them to run with low power consumption (on the Intel), and then they automatically switch to the AMD/ATI, or nVidia GPU, depending on which chip is installed, for more graphically intensive work. That often works well, but not in all cases. In most of those anomaly instances, the switching in the BIOS takes care of the issue - inconvenient? Yes, but often necessary. Some users have had good results by disabling the Intel in the OS's Control Panel, rather than at the hardware level with the BIOS.
Good luck,
Hunt

GS70-2PE - All video outputs are on damn intel gpu. :((((

Is there any chance to disable intel GPU? My friend takes 4k@60hz output over a simple HDMI cable with his ASUS N56vz computer. Because HDMI port is on the nvidia gpu. But with this very expensive computer I can only see 3 options in the nvidia control panel. I cant even see stereoscopic 3d options. Do you have any suggestion? Can I take hdmi output through nvidia GPU?

Quote from: TeeHokken on 26-February-15, 01:37:04
Horrible.... Like nightmare...
if you want a laptop to fully use Nvidia then try finding a dual gpu laptop like Y510P from lenovo that has GT750M SLI which disables intel gpu and puts 1 of them as main gpu and other 1 as sli gpu or you can maybe go for Nvidia GT80 that has 2 gpu's if i understood so then it should act like Y510P from lenovo to be nvidia as main only and not using optimus switch.

Tearing effects ! Vsync or triple buffering not activated ?

Hello,
I have the last Macbook Pro, 15", 2.4 Ghz Penryn, Nvidia Geforce 8600M GT with 256 of VRAM.
Leopard 10.5.2 and Leopard Graphic update 1.0 are installed.
I have the folowing problem : on all my games (for mac),when my FPS are higher than 60 FPS (refresh rate of my display), I'v got bad tearing effects !
I will take the example of UT2004, even with maximum resolution and graphic options, on little maps I can reach 110 FPS, that means I'm loosing 50 FPS because my display can only show 60 FPS. Over game like Colin mcrae rally, wacraft 3, Prey are also affected.
Usually, if I'm not wrong, the option Vsync (Vertical Synchronisation) stop this tearing effects, it force the graphic card no to be faster than the screen refresh rate. But I activate the "Vsync" option on all my games, it's has NO effets ! FPS are the same ! Tearing effects remane.
I'v heard that in MacOS X there is something called "triple buffering" that do the same job than vsync. But it should be activate by default !
So there is my questions : have you the same problem ? is there a way to activate (like on windows graphic card display tool) the Vsync for all applications in Leopard ? To check if "triple buffering is not disabled ?
If you have an idea, thank you !
Shifty
P.S. Sry for my english, I hope I not posted on the bad section

podosinovik wrote:Section "Extensions"
Option "Composite" "Disable"
EndSection
I didn't see improvments
I have a lxde + openbox system and let me tell this issue is too annoying!!!
I come from gnome + compiz and I hadn't any problems with my nvidia 8800gts.
I also started a topic on March 2010 where I observed with Compiz this problem doesn't exist.
I tried xcompmgr too but without results.

Error when running Stellarium with Intel GPU

I'm trying to run Stellarium on a 2009 desktop computer with an Intel GPU, but I get the following error message:
Your OpenGL subsystem has problems. See log for details. Ignore and suppress this notice in the future and try to continue in degraded mode anyway?
This is the log file:
2015-02-02T20:03:51
Linux version 3.18.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jan 27 20:45:02 CET 2015
Compiled using GCC 4.9.2
Qt runtime version: 5.4.0
Qt compilation version: 5.4.0
Addressing mode: 64-bit
MemTotal: 8101092 kB
MemFree: 154528 kB
MemAvailable: 4217808 kB
SwapTotal: 0 kB
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
cpu MHz : 2997.000
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
cpu MHz : 2997.000
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Kernel driver in use: i915
stellarium
[ This is Stellarium 0.13.2 - http://www.stellarium.org ]
[ Copyright (C) 2000-2014 Fabien Chereau et al ]
Writing log file to: "/home/fturco/.stellarium/log.txt"
File search paths:
0 . "/home/fturco/.stellarium"
1 . "/usr/share/stellarium"
Config file "/home/fturco/.stellarium/config.ini" does not exist. Copying the default file.
Config file is: "/home/fturco/.stellarium/config.ini"
Detected: OpenGL "2.1"
Driver version string: "2.1 Mesa 10.4.3"
GL vendor is "Intel Open Source Technology Center"
GL renderer is "Mesa DRI Intel(R) Q35 "
GL Shading Language version is "1.20"
MESA Version Number after parsing: 10.4
Mesa version is fine, we should not see a graphics problem.
GLSL Version Number after parsing: 1.2
This is not enough: we need GLSL1.30 or later.
You should update graphics drivers, graphics hardware, or use the MESA version.
Else, please try to use an older version like 0.12.4, and try there with --safe-mode
You can try to run in an unsupported degraded mode by ignoring the warning and continuing.
But more than likely problems will persist.
Aborting due to OpenGL/GLSL version problems.
I'm using xf86-video-intel version 2.99.917-1 at the moment.
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
I also get extremely slow performances when running 3D game Xonotic, but I don't know if it's due to the same problem. Any suggestion?

It seems that my GPU (Intel GMA 3100) is not supported anymore. See https://answers.launchpad.net/stellarium/+faq/2570: "Graphics cards which are no longer supported by Stellarium 0.13 and later include early ATI/AMD Radeon cards up to and including the Xxxx series (built 2004/05), NVidia up to GeForce FXxxx (2003/04), and Intel GMA before X3000, unfortunately also including the popular Atom-based netbooks of 2010."

Successful T61P Nvidia GPU motherboard swap to T61 Intel GPU

Hi all,
Just finished my first successful T61 Intel GPU motherboard conversion from a failed T61P with the dreaded "fatal" Nvidia GPU disease. At a very reasonable price, forum contributor Tuus furnished me with a good used T61 Merom/Intel board with a Middleton bios, which allows for faster Penryn CPU's (up to T9500) and SATA2 speeds on a Merom/Intel motherboard. I used the on-line Lenovo training videos and the Lenovo system maintenance manuals as a guide, and all went quite well. Thanks to all previous forum posters for providing me with an incredible knowledgebase of Thinkpad laptop system problems and solutions, and in particular TuuS for sharing his upgrade recommendations and repair experience.
T61P- 15.4 WSXGA, Intel 965 GPU, 4GB mem, T9300 CPU, 100gbx7200 rpm HD

Happy to hear that the planar swap went well.
Enjoy your reborn T61!
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Intel gpu graphic card dose over heat ?

i have a really bad experience with hp pavilion Dv6, i have many problems with GPU and overheating in the end the GPU corrupted and now i have to buy and replace new motherboard but the only mother board available now is the one with INTEL Graphic card not ATI , my question is if i replace the motherboard, does i going to suffer from the overheating problem again ?? is it better to replace my motherboard with the one that has intel GPU since that may reduce the overall temperature ??
note: my laptop is out off warranty.

The Intel integrated video will definitely run cooler than the ATI video model. The graphics performance will be quite a bit lower, but the Intel is good enough for anything except gaming and CAD and other intense graphics stuff.

MBP 2010 Intel GPU graphics glitches.

I've noticed that occasionally when my new Macbook Pro switches from the nVidia discrete GPU back to the integrated Intel GPU (tracked by the gfxCardStatus app), the LCD display becomes corrupted, I could best describe it as "sparkly" pixels in visible bands, and occasional wobbling of pixels.
I'm unable to take a screenshot with Grab, which leads me to believe this is a problem between the GPU and the display itself, not with the memory or GPU.
Message was edited by: Matariel

I am (and a few others are, too, it would seem) having the same issue. The integrated GPU corrupts everything, but the nVidia works great. The one problem is I run on battery the majority of the time, so I need to maximize my battery life.
I've been switching between the two by unchecking the "automatic graphics switching" option under "Energy Saver" in the preferences. If it's unchecked, you automatically use nVidia. Otherwise your computer will switch to the integrated GPU whenever it's not doing anything graphics intensive
Edit:
Also, mine seems to have begun occurring after the most recent software update that was offered.
Message was edited by: g-w-w

T61 - dying Intel GPU?

Hello all, this is probably my last chance to understand what's happening to my beloved T61. Here the specs:14.1" model - 1440x900px2.4 GHz T7700, undervolted with RightMark CPU Clock Utility5 Gb Ram250 Gb SSD (Middleton BIOS) + 250 Gb HDD in superbayIntel 965 chipsetIntel X3100 graphics chipWin 7 64bitBought used in 2011 and almost completely refurbished it. I think it's from 2007 or so.Plus, LOADS of love So, the problem I'm experiencing with the display can be seen in the attached pictures. The problem is not constant but comes and goes, (but now it's like this almost all the time), apparently in a random way, although once I noted that it is more likely to appear when there is a lot of white on the screen. It looks like pixels of a certain colour are turning red, for example, if I watch a movie, the black bars are all red. It's for sure not a screen problem, but graphics artefacts. I know what a tinted flourescent tube looks like as I have already replaced the screen on this laptop. The analogue VGA out works correctly. Installed different versions of the driver several times. In the beginning this seemed to solve the problem, but now that doesn't help anymore. Is the GPU about to die? if that happens, will I be able to still use the VGA out or will I have to replace the motherboard? Thanks for helping out!

KLiKzg wrote:
.think about buying another one...preferably with Quadro GPUs! I'd have to disagree here. If the intel GPU did actually die it's the first I'm aware of ever dying, but the nVidia were plagued with failures, but in any case there was a recent cache of brand new motherboards for this model found, the latest revision with support for Penryn processors and I think there are a couple left. If you'd like one you can send me a PM and I'll confirm it's still available. Looking at the first photo I must admit it looks like a failing backlight, but I agree with the other opinions here that if the external vga adapter displays the same the cause must be the motherboard. As for ram being the cause, I think if your ram was failing to this degree you'd have noticed stability issues too and constant blue screen crashes. most ram problems can be confirmed by removing one module at a time to identify the bad one.

PWM i915 intel-gpu-tools - how to know reg address

Hi
I found I face the screen flickering issue which causes eyestrain described here https://wiki.archlinux.org/index.php/ba … 15_only.29 and here https://01.org/linuxgraphics/documentat … tool-guide ; I have Intel HD Graphics/Sandy Bridge/Bay Trail;
By default I have 60Hz but EDID says clock 77.000Mhz
I tried to run util :
- intel_reg_read 0xC8254
- intel_reg_read 0xC6204
...these both addresses output is "0x0"
So my question is... how do I know what reg address I have? Or something is wrong with intel-gpu-tools?
p.s. I am not 100% sure it is the screen flickering problem only (so please advise any helpful another suggestion(s)) because I do suspect a wrong conf(s) combination or similar... Currently I came from sna to uxa to make rendering more clear and this worked a bit but still it seems like screen is micro-shaking or I don't know how to describe the effect; So I do need your advise where to look at...
Thanks
Last edited by mark001 (2014-11-17 07:14:14)

Hi
I found I face the screen flickering issue which causes eyestrain described here https://wiki.archlinux.org/index.php/ba … 15_only.29 and here https://01.org/linuxgraphics/documentat … tool-guide ; I have Intel HD Graphics/Sandy Bridge/Bay Trail;
By default I have 60Hz but EDID says clock 77.000Mhz
I tried to run util :
- intel_reg_read 0xC8254
- intel_reg_read 0xC6204
...these both addresses output is "0x0"
So my question is... how do I know what reg address I have? Or something is wrong with intel-gpu-tools?
p.s. I am not 100% sure it is the screen flickering problem only (so please advise any helpful another suggestion(s)) because I do suspect a wrong conf(s) combination or similar... Currently I came from sna to uxa to make rendering more clear and this worked a bit but still it seems like screen is micro-shaking or I don't know how to describe the effect; So I do need your advise where to look at...
Thanks
Last edited by mark001 (2014-11-17 07:14:14)

[Xorg] Disabling Triple Buffering on Intel GPU

Similar Messages

Maybe you are looking for