Xorg eating CPU time

Hi,
I just noticed that Xorg is now constantly burning 2 t 6 % of CPU time, even if nothing happens on the desktop.
I'm pretty confident this was not the case with the previous version of Xorg I had,
(say, last update one month ago).
Now I have this installed : xorg-server-1.10.2-1
(I'm ran a full system upgrade this morning, I use x86_64, and I'm not on testing, to help you figure out the system I run)
I'm using XFCE without panel, and cairo dock.
I disabled any fancy tranparency and so on, because I look for the best battery life.
Is there something new / noticeable with latests Xorg versions ?

I am seeing the same. I did a refresh install on a brand new x86_64 laptop. Wondering if it was a kernel issue I downgraded to kernel26 2.6.38.8-1 but see no difference. I do not see this performace hit on my i386 desktop using xorg-server 1.9.4.901-1
Last edited by steve___ (2011-07-02 15:08:20)

Similar Messages

Compressor eating CPU time...after quitting

I've been running Compressor lately for some DVD projects. I set up a batch to encode, but quit after about half the video files were encoded to work on some other things. Performance was pretty darn sluggish. I checked Activity Monitor, and lo and behold, compressord and qmasterd were still running and gobbling up CPU time. I force quit both of them, only to see them crop up again a few seconds later. WHAT? A force quit should absolutely terminate the process, no questions asked. I don't want Compressor running in the background, which is why I quit it and Batch Monitor in the first place. This is not a feature, this is a problem, and an inexcusable one at that. Anyone know how to get rid of this crap without a restart?
In addition, Compressor will not let any part of my computer sleep while running. The display on my iMac wont even dim, much go into standby. I can understand why it wouldn't let the computer or hard drive sleep, but the display? Come on! I sleep in the same room as this computer, so it's kind of an annoyance when I want to encode a batch overnight.

Heya Noble,
Basically, your computer's still compressing.
Compressor is the application that allows you to prepare your transcoding and/or encoding.
Once you "submit" the process, Compressor is done.
Qmaster takes over to transcode or encode the file as submitted by Compressor.
Batch Monitor merely allows you to view what's happening until Qmaster is done.
If you force quit Qmaster, then you'll never have a transcoded movie or encoded MPEG2 clip.
Your machine will probably compress 10 minutes of DV-NTSC source to the MPEG2 60 minute high quality setting in about 7 to 8 minutes. So, if you were encoding an hour of footage, you would have to allow Qmaster about 48 minutes to work. HDV source takes much, much longer. If this seems like "forever", then consider this: a G4/400 takes four hours to encode 10 minutes of DV-NTSC source to MPEG2. At that rate, an hour of footage would take a full day to encode.
Most importantly, these numbers are based on not using the computer for anything while it's transcoding and/or encoding. Even surfing the web will increase the time it takes to process the file or files that you've submitted.
If you are frequently submitting jobs to Qmaster, then you might consider getting a second computer so that you can work on one system while the other one encodes. It's not uncommon to have a dedicated box just for encoding. In general, the faster the processor(s), the faster the render.
If you are submitting jobs that are hours in length, then you might look into distributed network encoding that's now available with Compressor (more processors = more speed).
If your budget doesn't allow for another machine, you'll want to plan for using your computer at a "lesser" performance level or not using it at all until the job is completed.
You should be able to put the display to sleep, but not the computer nor the hard drive.
If you're having trouble with this, perhaps a piece of cardboard set in front of the display may block enough light such that you can sleep. You could also cover the computer with a box, just be sure to provide adequate ventilation. Be careful not to cover the computer with a blanket as it's sure to overheat and you won't be running Compressor at all.
Of course, if you don't want to put anything in front of the computer: launch Final Cut Pro, make the Viewer window active while a Slug is open, choose View > Digital Cinema Desktop Preview - Main. Then press command F12 to enable it. Your screen will go entirely black! Press escape to return to disable it. Leave iTunes open while playing some soft tunes and you should be counting sheep in no time.
Hope this helps,
Warren
Mac OS X (10.3.9)

Unknown SQL eating CPU time and library cache locks

Hello everyone,
we are seeing a lot of activity when opening new connections to the database from PHP web server and the time is being spent on a SQL which in Enterprise manager is reported as UNKNOWN and selecting the GV$SQL view for this sql_id yields nothing, the SQL is not there. We do not have any logon triggers.
I was wondering, if I know this SQL_ID (it's "c5brdpybgqss6"), can I see what it actually does? Can I trace it somehow?
Our environment is:
Oracle Database 11g Release 11.1.0.7.0 - 64bit Production
With the Real Application Clusters option
Two RAC instances, running RedHat ES 5 64bit
Clients are PHP, using oci8, using Instant Client 11.1.0.7
Thanks for any ideas how to further analyze this,
Michal.

Unfortunately no, it is NULL (see below). I tried metalink, but I don't know what to search for. I'll probably have to file a ticket with the support.
select username, sid, serial#, status, sql_id, prev_sql_id, event, seconds_in_wait
from gv$session
where sql_id='c5brdpybgqss6'
order by username, sid, serial#;
USERNAME SID SERIAL# STATUS SQL_ID PREV_SQL_ID EVENT SECONDS_IN_WAIT
IMWC2 945 64434 ACTIVE c5brdpybgqss6 latch: shared pool 5
IMWC2 1020 38821 ACTIVE c5brdpybgqss6 library cache lock 2
973 7519 ACTIVE c5brdpybgqss6 class slave wait 0
992 20 ACTIVE c5brdpybgqss6 EMON slave idle wait 3
1004 5 ACTIVE c5brdpybgqss6 EMON slave idle wait 5
1006 1195 ACTIVE c5brdpybgqss6 EMON slave idle wait 3
1014 2635 ACTIVE c5brdpybgqss6 EMON slave idle wait 3
1020 2755 ACTIVE c5brdpybgqss6 EMON slave idle wait 3
1026 3967 ACTIVE c5brdpybgqss6 EMON slave idle wait 2
1027 3039 ACTIVE c5brdpybgqss6 EMON slave idle wait 2
1042 805 ACTIVE c5brdpybgqss6 EMON slave idle wait 3
1044 481 ACTIVE c5brdpybgqss6 EMON slave idle wait 3
1046 300 ACTIVE c5brdpybgqss6 EMON slave idle wait 1
1053 2 ACTIVE c5brdpybgqss6 Streams AQ: waiting for time management or cleanup tasks 209637
1055 8 ACTIVE c5brdpybgqss6 Streams AQ: emn coordinator idle wait 4
1056 10 ACTIVE c5brdpybgqss6 Streams AQ: emn coordinator idle wait 0
1059 6 ACTIVE c5brdpybgqss6 Streams AQ: waiting for time management or cleanup tasks 0

Disconnected users eating 25% CPU time

Hi,
Some times my wife stay logged in on our common computer (she wants keep open her files). When I log in her account is disconnected. If I do not so any think on the computer the CPU load is about 25%. I checked the task manager, my wife's disconnected account
eating this CPU time. I checked the process, it is "Windows Logon User Interface Host".
I have 4 core CPU. It seems there is thread in the "Windows Logon User Interface Host" which is in an infinite loop. I am using Windows 8.1 with the latest updates.
It would be nice, if a Windows service does not eat CPU time just for nothing.
Best Regards.
László Nemesszeghy

Hi，
Do you use remote desktop connection? sometime, a incompatible 3 party remote desktop application can cause a high logonui.exe cpu usage.
And software like A-Tuning can also cause this issue, if you have this softwware installed, I suggest you uninstall them, then test again.
Yolanda Zhu
TechNet Community Support

Xorg eating 100% CPU time

Hello. I'm currently running a new, up-to-the-minute Arch 64-bit installation, but Xorg is consuming 100% of my CPU time.
#1) My Hardware:
Gateway 614GE desktop tower
MSI-6741 motherboard with Via/S3 Graphics Unicrome Pro IGP (disabled)
AMD Athlon64 Processor 3400+ (single-core @ 2.4 GHz)
2.0 GiB DDR ram
Sapphire ATi RadeonHD 3650 AGP
#2) My Software:
Arch Linux 64-bit (duh)
Kernel 2.6.31.4-1
Xorg 1.6.4 RC1
Mesa 7.5.1-2
Ati-Dri 7.5.1-2
Xf86-Video-Ati 6.12.99 (built from git yesterday)
Gnome 2.28.0
#3) My Xorg.conf :
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri2"
Load "dri"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor0"
VendorName "GWY"
ModelName "8b1b"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
Option "AGPMode" "8"
Option "AGPFastWrite" "True"
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
Option "ColorTiling" "True"
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
Option "RenderAccel" "True"
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
Option "AccelMethod" "EXA"
Option "DRI" "True"
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV635 PRO AGP [Radeon HD 3650]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Everything on my system looks like it is running in a slideshow at 3 or 4 frames per second. Pretty much everything is being software-rendered, I guess. I know that my ATi card cannot accelerate OpenGL untill kernel 2.6.32 comes out (at least not out-of-the-box) but I *know* it is capable of EXA, Xv, and Xrender. On both my Ubuntu 9.04 install and my previous Arch install, Xorg stayed at ~5% CPU usage. I'd kindly like some assistance in why nothing is being accelerated.
Thanks.

#4) My Xorg.0.log :
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux darkfire_fox 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 22 19:17:18 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:9596:1787:0028 ATI Technologies Inc RV635 PRO AGP [Radeon HD 3650] rev 0, Mem @ 0xb0000000/268435456, 0xcfef0000/65536, I/O @ 0x0000b800/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 6.12.99
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI RS880
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) [KMS] drm report modesetting isn't supported.
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[41] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[42] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[43] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[44] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[45] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[46] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[47] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[48] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[49] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[50] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[51] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[52] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[53] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[54] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[55] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[56] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[57] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[58] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[59] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[60] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[61] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[62] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[63] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[64] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) RADEON(0): TOTO SAYS 00000000cfef0000
(II) RADEON(0): MMIO registers at 0x00000000cfef0000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "8"
(**) RADEON(0): Option "AGPFastWrite" "True"
(**) RADEON(0): Option "ColorTiling" "True"
(**) RADEON(0): Option "RenderAccel" "True"
(**) RADEON(0): Option "AccelMethod" "EXA"
(**) RADEON(0): Option "DRI" "True"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 3650 AGP" (ChipID = 0x9596)
(--) RADEON(0): Linear framebuffer at 0x00000000b0000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1787 SubsystemID: 0x0028
IOBaseAddress: 0xb800
Filename: SE525SAM.008
BIOS Bootup Message: RV635 GDDR2_32MX16 128BIT 512MB 725E/400M
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x1fffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x1fffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 725000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card2
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card3
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card4
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card5
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card6
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card7
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card8
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card9
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card10
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card11
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card12
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card13
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card14
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: node name is /dev/dri/card14
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
(II) RADEON(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEON(0): Detected total video RAM=524288K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=90000 max=120000; xclk=40000
(II) RADEON(0): Output DVI-1 using monitor section Monitor0
(II) RADEON(0): I2C bus "DVI-1" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: DVI-1
Connector: DVI-I
CRT2: INTERNAL_KLDSCP_DAC2
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e50
(II) RADEON(0): Port1:
XRANDR name: DVI-0
Connector: DVI-I
CRT1: INTERNAL_KLDSCP_DAC1
DFP2: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7e40
(II) RADEON(0): I2C device "DVI-1:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "DVI-1:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Unhandled monitor type 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: GWY Model: 8b1b Serial#: 37107
(II) RADEON(0): Year: 2004 Week: 44
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 32 vert.: 24
(II) RADEON(0): Gamma: 2.98
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.618 redY: 0.349 greenX: 0.280 greenY: 0.605
(II) RADEON(0): blueX: 0.152 blueY: 0.063 whiteX: 0.281 whiteY: 0.310
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RADEON(0): #2: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 94.5 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1068 v_border: 0
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(II) RADEON(0): Serial No: MRH4A50037107
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ef91b8bf3900000
(II) RADEON(0): 2c0e0103082018c6ea5c119e59479b27
(II) RADEON(0): 10484fa14a0031594559456861598180
(II) RADEON(0): 010101010101ea240060410028303060
(II) RADEON(0): 130040f01000001e302a009851002c40
(II) RADEON(0): 3070130040f01000001e000000fd0032
(II) RADEON(0): a01e460b000a202020202020000000ff
(II) RADEON(0): 004d5248344135303033373130370041
finished output detect: 1
finished all detect
before xf86InitialConfiguration
Dac detection success
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: GWY Model: 8b1b Serial#: 37107
(II) RADEON(0): Year: 2004 Week: 44
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 32 vert.: 24
(II) RADEON(0): Gamma: 2.98
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.618 redY: 0.349 greenX: 0.280 greenY: 0.605
(II) RADEON(0): blueX: 0.152 blueY: 0.063 whiteX: 0.281 whiteY: 0.310
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RADEON(0): #2: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 94.5 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1068 v_border: 0
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(II) RADEON(0): Serial No: MRH4A50037107
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ef91b8bf3900000
(II) RADEON(0): 2c0e0103082018c6ea5c119e59479b27
(II) RADEON(0): 10484fa14a0031594559456861598180
(II) RADEON(0): 010101010101ea240060410028303060
(II) RADEON(0): 130040f01000001e302a009851002c40
(II) RADEON(0): 3070130040f01000001e000000fd0032
(II) RADEON(0): a01e460b000a202020202020000000ff
(II) RADEON(0): 004d5248344135303033373130370041
(II) RADEON(0): EDID vendor "GWY", prod id 35611
(II) RADEON(0): Output DVI-1 disconnected
(II) RADEON(0): Output DVI-0 connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output DVI-0 using initial mode 1024x768
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[41] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[42] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[43] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[44] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[45] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[46] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[47] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[48] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[49] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[50] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[51] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[52] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[53] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[54] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[55] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[56] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[57] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[58] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[59] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[60] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[61] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[62] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[63] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[64] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) RADEON(0): RADEONScreenInit b0000000 0 0
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): Dynamic Power Management Disabled
mc fb loc is 00cf00b0
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x20000000
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00b0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
(II) RADEON(0): Largest offscreen area available: 1280 x 6909
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00b0 0x00ff00e0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(EE) RADEON(0): Acceleration initialization failed
(II) RADEON(0): Acceleration disabled
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
(II) RADEON(0): Largest offscreen area available: 1280 x 6901
(II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Mode 1024x768 - 1376 808 5
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00b0 0x00cf00b0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
before 9450
after 9450
freq: 94500000
best_freq: 94500000
best_feedback_div: 70
best_frac_feedback_div: 0
best_ref_div: 2
best_post_div: 10
(II) RADEON(0): crtc(0) Clock: mode 94500, PLL 94500
(II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x46(70), fracfbdiv 0, pdiv 10
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DAC1 setup success
Output CRT1 enable success
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Mode 1024x768 - 1376 808 5
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00b0 0x00cf00b0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
before 9450
after 9450
freq: 94500000
best_freq: 94500000
best_feedback_div: 70
best_frac_feedback_div: 0
best_ref_div: 2
best_post_div: 10
(II) RADEON(0): crtc(0) Clock: mode 94500, PLL 94500
(II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x46(70), fracfbdiv 0, pdiv 10
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DAC1 setup success
Output CRT1 enable success
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 320 x 240
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device PS2++ Logitech TrackMan
(**) PS2++ Logitech TrackMan: always reports core events
(**) PS2++ Logitech TrackMan: Device: "/dev/input/event6"
(II) PS2++ Logitech TrackMan: Found 3 mouse buttons
(II) PS2++ Logitech TrackMan: Found x and y relative axes
(II) PS2++ Logitech TrackMan: Found scroll wheel(s)
(II) PS2++ Logitech TrackMan: Configuring as mouse
(**) PS2++ Logitech TrackMan: YAxisMapping: buttons 4 and 5
(**) PS2++ Logitech TrackMan: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS2++ Logitech TrackMan" (type: MOUSE)
(**) PS2++ Logitech TrackMan: (accel) keeping acceleration scheme 1
(**) PS2++ Logitech TrackMan: (accel) filter chain progression: 2.00
(**) PS2++ Logitech TrackMan: (accel) filter stage 0: 20.00 ms
(**) PS2++ Logitech TrackMan: (accel) set acceleration profile 0
(II) PS2++ Logitech TrackMan: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event5"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Dac detection success
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): EDID vendor "GWY", prod id 35611
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1068 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) RADEON(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync (63.6 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: GWY Model: 8b1b Serial#: 37107
(II) RADEON(0): Year: 2004 Week: 44
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 32 vert.: 24
(II) RADEON(0): Gamma: 2.98
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.618 redY: 0.349 greenX: 0.280 greenY: 0.605
(II) RADEON(0): blueX: 0.152 blueY: 0.063 whiteX: 0.281 whiteY: 0.310
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RADEON(0): #2: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 94.5 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1068 v_border: 0
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(II) RADEON(0): Serial No: MRH4A50037107
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ef91b8bf3900000
(II) RADEON(0): 2c0e0103082018c6ea5c119e59479b27
(II) RADEON(0): 10484fa14a0031594559456861598180
(II) RADEON(0): 010101010101ea240060410028303060
(II) RADEON(0): 130040f01000001e302a009851002c40
(II) RADEON(0): 3070130040f01000001e000000fd0032
(II) RADEON(0): a01e460b000a202020202020000000ff
(II) RADEON(0): 004d5248344135303033373130370041
(II) RADEON(0): EDID vendor "GWY", prod id 35611
Dac detection success
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): EDID vendor "GWY", prod id 35611
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1068 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) RADEON(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync (63.6 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: GWY Model: 8b1b Serial#: 37107
(II) RADEON(0): Year: 2004 Week: 44
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 32 vert.: 24
(II) RADEON(0): Gamma: 2.98
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.618 redY: 0.349 greenX: 0.280 greenY: 0.605
(II) RADEON(0): blueX: 0.152 blueY: 0.063 whiteX: 0.281 whiteY: 0.310
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RADEON(0): #2: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 94.5 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1068 v_border: 0
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(II) RADEON(0): Serial No: MRH4A50037107
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ef91b8bf3900000
(II) RADEON(0): 2c0e0103082018c6ea5c119e59479b27
(II) RADEON(0): 10484fa14a0031594559456861598180
(II) RADEON(0): 010101010101ea240060410028303060
(II) RADEON(0): 130040f01000001e302a009851002c40
(II) RADEON(0): 3070130040f01000001e000000fd0032
(II) RADEON(0): a01e460b000a202020202020000000ff
(II) RADEON(0): 004d5248344135303033373130370041
(II) RADEON(0): EDID vendor "GWY", prod id 35611
Dac detection success
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): EDID vendor "GWY", prod id 35611
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1068 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) RADEON(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync (63.6 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: GWY Model: 8b1b Serial#: 37107
(II) RADEON(0): Year: 2004 Week: 44
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 32 vert.: 24
(II) RADEON(0): Gamma: 2.98
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.618 redY: 0.349 greenX: 0.280 greenY: 0.605
(II) RADEON(0): blueX: 0.152 blueY: 0.063 whiteX: 0.281 whiteY: 0.310
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RADEON(0): #2: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 94.5 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1068 v_border: 0
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(II) RADEON(0): Serial No: MRH4A50037107
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ef91b8bf3900000
(II) RADEON(0): 2c0e0103082018c6ea5c119e59479b27
(II) RADEON(0): 10484fa14a0031594559456861598180
(II) RADEON(0): 010101010101ea240060410028303060
(II) RADEON(0): 130040f01000001e302a009851002c40
(II) RADEON(0): 3070130040f01000001e000000fd0032
(II) RADEON(0): a01e460b000a202020202020000000ff
(II) RADEON(0): 004d5248344135303033373130370041
(II) RADEON(0): EDID vendor "GWY", prod id 35611
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Mode 1280x1024 - 1688 1068 5
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00b0 0x00cf00b0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
before 10800
after 10800
freq: 108000000
best_freq: 108000000
best_feedback_div: 72
best_frac_feedback_div: 0
best_ref_div: 2
best_post_div: 9
(II) RADEON(0): crtc(0) Clock: mode 108000, PLL 108000
(II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x48(72), fracfbdiv 0, pdiv 9
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DAC1 setup success
Output CRT1 enable success
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success

Tab controls eating up CPU time

A coworker created the section of code in the attached example to change the colors of each tab page in a tab control. Originally, he had this portion of code inside a while loop. We found that as the application ran it would use more and more CPU time until the CPU load was at 100% (it would start around 1-2%); the time for the increase was a few minutes. Moving this code outside of the while loop completely fixed this problem.
Question: why would setting a tab control color in a while loop cause this increase?
Platform: LabVIEW 6.1 on Windows 2000.
Attachments:
LV_Tab_control.gif ‏4 KB

This behavior is caused by the repeated creation of page references inside the loop. When you move the Page property node outside the loop you don't see this memory leek.
The reason for this is that each time the loop executes the property node creates a new set of references. Since these references are always the same, it is best to have this code outside the loop and only get the page references once.
Zvezdana S.
National Instruments

Mail in 10.6.4 not usable: it consumes all CPU time and will not quit

Mail application does not work properly.
It eats up most of the available CPU time (till >300% on my machine), becomes unresponsive and will only quit when killed by a force quit in the Activity Monitor.
I have only two accounts set up. One Gmail account and a google apps one.
I used to synch with a Blackberry but now I synch directly through google apps.
The problem was sporadic at best at first but has become the usual behaviour now. Major change has been installing 10.6.4
I have switched to Thunderbird since Mail is not usable.
Tx for any hint on how to solve this issue

It seems to be a recurring issue with 10.6.4...there's probably not much mere mortals like us can do. I haven't found a solution. Try re-installing 10.6.4.

Swing application eats CPU on resume after standby

My application contains a mix of regular Swing components and about 200 (small) custom components (JPanels) that draw themselves. The problem is that if put my laptop into Standby, then restart it, the application eats CPU. It goes from ~4% pre standby to ~48% after standby. Totally repeatable. There is only the main thread, the AWT thread and a couple timers firing: one to get data from a server and one to redraw the custom controls to make the control blink (calls repaint() to cue up a call to paintComponent()). I put timing code in the two timer driven threads and both are running fine. NOTE: each of the custom components is just a rectangle with a short text string in it. Think checkerboard with text. The background color is all that is being changed. It's basically a grid of alarm/status "lights".
I did some searching and only found a reference to a drawing bug that was fixed back in 1.4.x that had to do with WinXP and dual-headed computers.
Note that another simple Swing application I wrote (no custom controls), doesn't appear to behave this way, so I suspect it has to do with the custom drawing stuff (rolling my own paintComponent() method).
Any thoughts on how to figure out what is eating the CPU? I'm using NetBeans 6.7 and JDK 1.6_14 under Windows XP.
Edited by: garrysimmons on Sep 15, 2009 1:52 PM
Edited by: garrysimmons on Sep 15, 2009 2:57 PM
Edited by: garrysimmons on Sep 15, 2009 3:02 PM

It doesn't matter if it's a Swing timer or a Util timer. It behaves the same either way. That was one of the first things I tried.
I ended up refactoring the code to go from a grid of individual controls (think checker board where each square is a control that draws itself), to a single "board" control that draws a grid. That seems to have fixed the issue. I can go in/out of Standby and the app doesn't eat a ton of CPU any more. The real problem may still be there, just too small of an effect to notice.
I don't know why the original design would work fine before a Standby, but not after. Having ~200 little controls doing repaints twice a second must confuse something in the JVM/Windows versus having 4 large controls doing the same amount of drawing.
It's working, so time to move on.

CPU times for application

I am trying to figure out the best way to get CPU times for our
application to do certain things. It sits on top of a database and
I wanted to separate out what the database time and the application
time is. I was going to use the 3C clock function to get a start
time and then a time right before the database call and then a time
when it comes back. It seems like the granularity of the clock function
may not be what I need. Anyone have any ideas on how to do this? Is
this the best way?
Thanks
John

This is a hard question to answer because it depends on the cluster agent/application.
On one hand you may have a simple Sun Cluster application that fails over in seconds because it has to do a limited amount of work (umount here, mount there, plumb network interface, etc) to actually failover.
On the other hand these operations may, depending on the application, take longer than another application due to the very nature of that application.
An Apache web server failover may take 10-15 seconds but an Oracle failover may take longer. There are many variables that control what happens from the time that a node failure is detected to the time that an application appears on another cluster node.
If the failover time is 30 minutes I would ask your vendor why that is exactly.
Not in a confrontational way but a 'I don't get how this is high availability' since the assumption is that up to 30 minutes could elapse from the time that your application goes down to it coming back on another node.
A better solution might be a different application vendor (I know, I know) or a scalable application that can run on more than one cluster node at a time.
The logic with the scalable approach is that if a failover takes 30 minutes or so to complete it (failover) becomes an expensive operation so I would rather that my application can use multiple nodes at once rather than eat a 30 minute failover if one node dies in a two node cluster:
serverA > 30 minute failover > serverB
seems to be less desirable than
serverA, serverB, serverC, etc concurrently providing access to the application so that failover only happens when we get down to a handful of nodes
Either one is probably more desirable than having an application outage(?)

OutlookSyncClient.exe Eats CPU Until Killed

Dear All,
I upgraded to 2.0 last night, and everything seems to be working as it is supposed to, EXCEPT for an issue with Outlook 2003 synchronization. Each time I sync, OutlookSyncClient.exe starts using up large amounts of CPU time. After the sync is finished, it continues to use CPU time until I kill it (Task Mananger -> End Process). I synced late last night, and when I woke up this morning I found that it was still active and burning CPU.
I have four CPU cores, and it is using all of one core and 50-100% of another core. This is with XP Pro with latest service pack and updates.
Anyone else seeing this? Bug report to Apple I guess?
Thanks,
B. Coggins

Same problem here, except using Outlook 2002. I've spent way too much time running down run paths including uninstalling and reinstalling itunes, clearing synch history, searching for conflicts, etc. I think it started after updating to itunes 7.7.0.43. I did not update my ipod Touch to 2.0 and hope that won't be a requirement. Hopefully there is a fix... or will be a fix soon. This has been annoying, but it helps to see I'm' not alone. I'm guessing everyone who uses the synch feature between their ipod touch or iphone in conjunction w/ Outlook is probably experiencing the same problems, most won't post here but likely will visit when searching for answers. Again, my issues are the same, OutlookSyncClient and SyncServer are eating up the CPU resources and ipod no longer syncs at all between contacts and calenders.

KACPID eating CPU on a 6250 blades with SLES 10 SP1

Hi all,
We have just installed Sles 10 SP1 with OES2 addon on a 6250 blade and it seems that kacpid process is eating CPU (starts with 25 %) cycles.
This process cannot be killed en wil eat more cycles after time. After 2 days is allocating almost two cores.
The latest bios is installed (V11) en we are running kernel 2.6.16.54-0.2.11.
It might be a acpi problem.
Any ideas?
Cheers
JJ Dullink

Same problem here with SLES 9 SP4.
And by the way, booting with acpi=ht might help, although it disables most of the power saving features.

Firefox is using large amounts of CPU time and disk access, and I need to know how to shut down most of this so I can actually use the browser.

Firefox is a very busy piece of software. It's using large amounts of CPU time and disk access. It puts my usage at low priority, so I have to wait for some time to be able to use my pointer or keyboard. I don't know what it uses all that CPU and disk access time for, but it's of no use to me. It often takes off with massive use of resources when I'm not doing anything, and I may not have use of my pointer for several minutes. How can I shut down most of this so I can use the browser to get my work done. I just want to use the web site access part of the software, and drop all the extra. I don't want Firefox to be able to recover after a crash. I just want to browse with a minimum of interference from Firefox. I would think that this is the most commonly asked question.

Firefox consumes a lot of CPU resources
* https://support.mozilla.com/en-US/kb/Firefox%20consumes%20a%20lot%20of%20CPU%20resources
High memory usage
* https://support.mozilla.com/en-US/kb/High%20memory%20usage
Check and tell if its working.

Cpu time is not getting displayed in explain plan

Hi All,
I am trying to analyze one query using explain plan .like below
1) explain plan for
SELECT /*+ parallel(tsp,8) use_hash( tsp tp) */ count(1)
FROM router tp,
receiver tsp
WHERE tp.rs = tsp.rp
AND creater_date >=to_date('04032009000000','ddmmyyyyhh24miss')
and tsp.XVF is not null
and tp.XVF is not null
and tp.role_name='BR';
2)@$ORACLE_HOME/rdbms/admin/utlxpls.sql
But i am getting only following columns in result .
| Id | Operation | Name | Rows | Bytes | Cost |
No Cpu time preset .
How can i extimate CPU time ?
Pls help
Thanks

am_73798 wrote:
I am trying to analyze one query using explain plan .like below
But i am getting only following columns in result .
| Id | Operation | Name | Rows | Bytes | Cost |
No Cpu time preset .
How can i extimate CPU time ?You need to mention your database version (4-digits, e.g. 9.2.0.8).
In Oracle 9i CPU costing is disabled by default, you need to gather WORKLOAD system statistics to enable the CPU costing.
In 10g CPU costing is enabled by default and uses default NOWORKLOAD system statistics if no WORKLOAD system statistics have been gathered. It can only be disabled by setting an undocumented parameter or by changing the OPTIMIZER_FEATURES_ENABLE parameter back to 9i compatibility.
You can check the status of your system statistics by running the following query in SQL*Plus:
column sname format a20
column pname format a20
column pval2 format a20
select
sname
, pname
, pval1
, pval2
from
sys.aux_stats$;Can you show us the actual (complete) output you get from "utlxpls.sql"? Use the \ tag to preserve formatting here:
\output
\will show asoutput
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

ITunes 10.6.3 hogs CPU time

I'll notice the system bogging down...and find that iTunes is use 80% or more of my CPU time in Activity Monitor. This did not happen with 10.6.1. Tips/tricks/suggestions would be appreciated.

I'll notice the system bogging down...and find that iTunes is use 80% or more of my CPU time in Activity Monitor.
There's a couple of different things that can hit folks in this way.
Doublechecking ... are you getting this when iTunes is in the mini player mode? Or in the main player?

Apple mobile device service uses too much cpu time

Apple mobile device service uses too much cpu time, from 88% to 99% of the CPU time.

The best way to fix this is to completely remove all aspects of iTunes then reinstall. Step by step directions are on this article. Good luck
http://support.apple.com/kb/HT1925?viewlocale=en_US

Xorg eating CPU time

Similar Messages

Maybe you are looking for