Xorg error after Upgrade today - Mouse not working

Hello,
did my regular upgrade today (incl new kernel 2.6.28), and when i rebooted the computer, my mouse stopped working (the pointer is visible, but cannot be moved)... well, i can operate my system sonewhat without a mouse (as is do now), but i'd rather have my mouse back
/var/log/Xorg.0.log gives following error:
config/hal: NewInputDeviceRequest failed
in xorg.conf i have
Option "AutoAddDevices" "False"
(enabling AutoAddDevices didn't help)
does anybody have an idea?
greets,
pseb

Same problem with my logitech mouse (model: Premium Optical whell mouse) after kernel upgrade, if i use a usb-to-ps2 adapter it doesn't work and in /var/log/messages.log i have...
Jan 16 11:52:00 osaka psmouse.c: Touchpad at isa0060/serio1/input0 lost sync at byte 4
Jan 16 11:52:00 osaka psmouse.c: Touchpad at isa0060/serio1/input0 - driver resynched.
Jan 16 11:52:00 osaka psmouse.c: Touchpad at isa0060/serio1/input0 lost sync at byte 4
Jan 16 11:52:00 osaka psmouse.c: Touchpad at isa0060/serio1/input0 lost sync at byte 4
Jan 16 11:52:00 osaka psmouse.c: Touchpad at isa0060/serio1/input0 - driver resynched.
Jan 16 11:52:00 osaka psmouse.c: Touchpad at isa0060/serio1/input0 lost sync at byte 4
Jan 16 11:52:00 osaka psmouse.c: Touchpad at isa0060/serio1/input0 lost sync at byte 4
Jan 16 11:52:00 osaka psmouse.c: Touchpad at isa0060/serio1/input0 lost sync at byte 4
Jan 16 11:52:00 osaka psmouse.c: Touchpad at isa0060/serio1/input0 lost sync at byte 4
Jan 16 11:52:00 osaka psmouse.c: Touchpad at isa0060/serio1/input0 lost sync at byte 4
Jan 16 11:52:00 osaka psmouse.c: issuing reconnect request
...if i move the mouse (i haven't a touchpad).
If i use the usb port instead of ps2 it works well.
I use xorg with hotplugging enabled, i have no section about my mouse in xorg.conf.
Last edited by Babets (2009-01-16 13:43:17)

Similar Messages

After Upgradation BPF is not working for some users

Hi All,
We have recently upgraded from BPC 5.1 to 7MS SP7. we are having multi server setup with one application / reporting server (windows 2003 and one sql server 2008 (windows 2003 64 bit).
Intially before upgradation we don't have any issues with BPF and it worked fine for all users. But post upgradation tasks within the BPF does not work for other users except for the first two people who first used it. Other users have the same rights as the ones who can access the tasks.
when they click on the link it gets them to eExcel and the right application but doesnt open the package or report assigned to the task. It doesn't give us any errors, on the status bar we get a message finalising but does not getting any thing.
Any inputs ??

Hi,
Are you sure that those users have installed BPC 7 SP7 clients on their machine? Meaning that you uninstalled 5.1 clients and installed the new client from http://servername/Osoft?
If yes, you should maybe run a client diagnostic on the machines and also check the Management Console for any error messages.
Hope this will drive you to a potential solution.
Best Regards,
Patrick

After upgrading IO5 speaker not working

Please advice how to resolve speaker problem after upgrading to IO5, speaker not working and volume bar is missing too.

What Troubleshooting Steps have you tried...
The Basics are Restart... Reset... Restore
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
iPhone Reset
http://support.apple.com/kb/ht1430

After upgrade USB Keyboard not working to unlock cryptdev-ed HDD

Hi,
Is there any sane reason, why my USB keyboard does not work after upgrading right now to enter the keyphrase to unlock my hdd? (x86_64, kernel 2.6.28-1.1, luks encrypted hdd that contains an lvm2 volume) The keyboard works fine in grub, short time before I have to enter the password, it goes black (numblock LED turns off). Luckily I have an USB-to-PS/2 converter, so I just plugged it in there, the system recognizes this and I'm able to enter the password. Afterwards, pluggin the keyboard back into its USB port, it works again.
Has anyone encountered the same strange behaviour? Or has anyone a solution for this problem?
best regards

Even worse, my LUKS key is stored on a USB-Stick. After upgrading, my USB-Stick was not recognized and so the LUKS key could not be read. Luckily (very luckily) I had defined a plain text keyphrase for LUKS slot 2 and so I was able to enter this via the PS2 keyboard. Anyone who has not provided this "backdoor" for themselves faces a difficult task.
A bug report exists concerning this problem: http://bugs.archlinux.org/task/12867

After upgrade Flash Player not working.

I have tried to upgrade to the newest flash player twice now and both times it has failed to work. I am running MacOS 10.5.8 and all browsers are current. I have tried to disable the hardware acceleration Setting but the Settings dialog doesn't appear. Nor does the Global Settings on the Adobe site.
thanks, Zane

Sorry, I don't know anything about Macs, and there are no Mac experts coming to this forum these days. All I can give you is a link to the Mac troubleshooting guide http://kb2.adobe.com/cps/865/cpsid_86551.html

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

Dear sir I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract. Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card. And invalid sim appeared.so I bought it without contract but it

Dear sir
I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
Please tell me whats the matter?
My phone serial no 86034HTCA4T
Modem firmware 04.12.09
Thanks

Without contract is not the same as unlocked. The update to iOS 7 relocked
the iPhone to the wireless carrier to which it was originally locked. You must
contact that wireless carrier to see if they offer unlocking and if you qualify.
If you used jailbreak or other hack to unlock the iPhone initially, the method
used may prevent a legitimate unlock from succeeding and may render your
iPhone unuseable.

I am using Iphone 4S and did the ios upgrade to ios7. after this, wifi is not working. Can any one support what could be the issue.

I am using Iphone 4S. two days before i upgraded to IOS 7 and after this wifi is not working. Any one can help. Mani

Follow the steps in the article below:
http://support.apple.com/kb/ts1559
If after all steps the issue remains then book an appointment at an Apple Stor to have the iPhone evlauated and possibly replaced.

I got a vius and after removing Pro would not work, trying to reload and getting Error 1334, can someone advise me how to fix.

I got a vius and after removing Pro would not work, trying to reload and getting Error 1334, can someone advise me how to fix.

I downloaded, ran and restarted, tried to install Pro got same error
Thank You!
Robert W. O'Rourke
Tesla Systems, Inc.
<phone # removed - kglad>

TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
My iphoto was working with photostream and now it will not connect at all.
I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
help!

FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

Error after upgrade CRS 4.0.4SR1 to 4.0.5SR2

Hi,
I've got some errors after upgrading my CRS 4.0.4SR1 cluster to 4.0.5SR2.
First my publisher's status stay in "patch" status for near 2 days now. I'm not able to change anything in the configuration, i've got this message "Config Changes are not allowed during 'Patch' operation, which was started by '_ccbu_build' at 'Thu Apr 08 04:31:04 CEST 2010 '. Please try again after 'Patch' is complete."(ERREUR02.jpg). How can I change this status?
Then I've got errors in historical DB which is working but not on the publisher only on subscriber. How can I resynchronize this DB?
Thanks for your help.

Thanks Tammy for the reply
We already tried the suggested SAP Note couple of time without any luck.
Regards,
SJ

Login Error after Upgrading from BW 3.5 to BI 7.0

Hi Experts,
We have carried out an upgrade from BW 3.5 to BI 7.0.
After Upgrade we are not able to login using SAP GUI. we are getting an error saying..
Username or Password not Valid..
During the upgrade (in Netweaver 2004s ) is there procedure necessary to be followed, which we could have missed..
Your response will be greatly appreciated.
Regards
LRaghunahth

Hi
Thanks a lot for your reponse.
Basically I am able to login thru sap* / ddic and can unlock the users / reset the password.
But the customer wants to know why the user is getting locked and it happened because of any procedure miss whil performing the upgrade..
if it is usual that users get locked during upgrade, any SAP Notes to refer..
Thanks a lot for helping in this community.
Best Regards
L Raghunahth

Mouse not working when reinstalling OS X with install disk

I am trying to reinstall OS X 10.3 on iMAC G5 after a hard drive crash with the help of the original install disks, but my wireless mouse does not work anymore. Any ideas how I can solve this or go through the installation process with the keyboard alone? I couldn't find a keyboard shortcut to tab from a list in a window to the select button...

How is your mouse not working? Is it dead?
Is the wireless mouse a Mighty Mouse or a 3rd party mouse?
Does you mouse need batteries?
*Just in case it's dirty:*
http://docs.info.apple.com/article.html?artnum=302417 How to clean your Mighty Mouse
Take a piece of bright white paper, turn the mouse upside down on it, press down on the ball, and run the mouse quickly in circles over the paper. This will remove all the gunk that's building up on the ball
TIP: To get to the gook inside the scroll nipple use a plastic toothpick.
"Other Options:" Wear latex disposable gloves. A box of same can be purchased from your local Dollar Store or Pharmacy.
Some cell phone leather cases actually fit right over the Mighty Mouse.
Clean/wipe the Mighty Mouse off with a damp cloth/rag prior to going to bed each evening.
Some users have found using the small alcohol pads quite successful. These can be obtained from any drug/pharmacy or Dollar Store.
Only do the following if your warranty has run out:
Cleaning inside and dismantling the Apple Mighty Mouse
If so, then I suggest (if your 1 year warranty is not up and/or you have Apple Care Protecton Plan) you call Apple Tech Support & ask for a replacement.
=========================
Mighty Mouse Take Apart Photos

Flash 9,0,124,0 security error after upgrade

I get the following error after upgrading my Flash Player
(after my system prompted me to install it while running the Flash
editor):
Internet Explorer has blocked this site from using an ActiveX
control in an unsafe manner.
I have uninstalled and reinstalled the player from the
browser, about 5 times now and it continues to be a problem for IE.
Works ok in Firefox if I manually download the FF installer. Is
there a standalone installer for Vista/IE7 or am I forced to use
the ActiveX installer which seems to have issues?

Fix: Removed both (!?more than one?!) versions of flash
player in my Programs and Features dialog, then ran
uninstall_flash_player.exe, reset IE7 to factory spec, then
reinstalled Flash from ActiveX. Seems to be working now.

After upgrading to Belle, not able to view number ...

I recently upgraded my Nokia E6-00 to Belle OS. After upgrading, i am not able to view number of characters remaining while composing text msg.
While composing a text msg, we see number of word characters remaing to complete the first part of msg. If that it is completed then second part starts and so on.
For eg., when we open the compose msg window, we see 160(1). Once we start typing-we see the no. or characters remaining - like 130(1), 98(1), and so on.
But after upgrading to Belle, i am not able to view number of characters remaining while composing text msg.
Can anyone help on this?

The problem is not with duplicate contacts. It is with Nokia Suite. It installa a piece of software on the phone after which this link breaks.
How do I know this? I recently tried the leaked belle version by flashing my phone. After which everything was working fine. That is numbers showing up in call log and with messages.
I recently put the official release using Nokia Suite and the problem is back. Hope Nokia figures this out and fixes it.

Xorg error after Upgrade today - Mouse not working

Similar Messages

Maybe you are looking for