XOrg freezes completely
Hello everybody,
since a few days my new notebook is not working properly anymore (propably after a system update).
During useage suddenly X freezes. Most of the time when this happens, you can't move the mouse anymore, but somtimes you can.
However the error most likely occurs when flash is in use, but also sometimes without flash running.
When there was music on at the time of the error there's still a loop of the last one second played, like a hanging record.
Last time my system froze with the mouse still active (i actuallly don't know if thats the same error at all), it was still reachable for a short time via SSH and at the next boot there was written into Xorg.0.log.old:
(EE) [mi] EQ overflowing. Additional events will be discarded until existing events are processed.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/Xorg.bin (xorg_backtrace+0x56) [0x593a46]
(EE) 1: /usr/bin/Xorg.bin (mieqEnqueue+0x24b) [0x574c2b]
(EE) 2: /usr/bin/Xorg.bin (QueuePointerEvents+0x52) [0x44f092]
(EE) 3: /usr/bin/Xorg.bin (xf86PostMotionEvent+0xd6) [0x485ee6]
(EE) 4: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f793d3de000+0x5308) [0x7f793d3e3308]
(EE) 5: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f793d3de000+0x7492) [0x7f793d3e5492]
(EE) 6: /usr/bin/Xorg.bin (0x400000+0x75888) [0x475888]
(EE) 7: /usr/bin/Xorg.bin (0x400000+0xa05f7) [0x4a05f7]
(EE) 8: /usr/lib/libc.so.6 (0x7f79486b9000+0x339f0) [0x7f79486ec9f0]
(EE) 9: /usr/lib/libc.so.6 (ioctl+0x7) [0x7f7948799c07]
(EE) 10: /usr/lib/libdrm.so.2 (drmIoctl+0x28) [0x7f794985b9d8]
(EE) 11: /usr/lib/libdrm.so.2 (drmCommandWrite+0x1b) [0x7f794985e39b]
(EE) 12: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f7941a9d000+0x4b0ae4) [0x7f7941f4dae4]
(EE) 13: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f7941a9d000+0x4b1f22) [0x7f7941f4ef22]
(EE) 14: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f7941a9d000+0x4c2591) [0x7f7941f5f591]
(EE) 15: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f7941a9d000+0x1c04d9) [0x7f7941c5d4d9]
(EE) 16: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f7941a9d000+0x141710) [0x7f7941bde710]
(EE) 17: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f7941a9d000+0x1c2905) [0x7f7941c5f905]
(EE) 18: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f7941a9d000+0x142824) [0x7f7941bdf824]
(EE) 19: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f7941a9d000+0x142a82) [0x7f7941bdfa82]
(EE) 20: /usr/lib/xorg/modules/libglamoregl.so (0x7f7943169000+0x22dac) [0x7f794318bdac]
(EE) 21: /usr/lib/xorg/modules/libglamoregl.so (0x7f7943169000+0x14355) [0x7f794317d355]
(EE) 22: /usr/lib/xorg/modules/libglamoregl.so (0x7f7943169000+0x1472c) [0x7f794317d72c]
(EE) 23: /usr/bin/Xorg.bin (0x400000+0x1841a8) [0x5841a8]
(EE) 24: /usr/bin/Xorg.bin (0x400000+0xc796a) [0x4c796a]
(EE) 25: /usr/bin/Xorg.bin (0x400000+0x3487b) [0x43487b]
(EE) 26: /usr/bin/Xorg.bin (0x400000+0x376d7) [0x4376d7]
(EE) 27: /usr/bin/Xorg.bin (0x400000+0x3b866) [0x43b866]
(EE) 28: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f79486d9040]
(EE) 29: /usr/bin/Xorg.bin (0x400000+0x25d0e) [0x425d0e]
(EE)
(EE) [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
(EE) [mi] mieq is *NOT* the cause. It is a victim.
(EE) [mi] EQ overflow continuing. 100 events have been dropped.
When the system freezes with unmoveable mouse, there's no backtrace in Xorg's log.
Do you have any idea what could cause this issue?
Last edited by ArchIsCool (2014-10-07 09:29:52)
If this is a bug in the ati drivers, it can be reported on the bugtracker at freedesktop.org.
kokoko3k, that seems like a very different issue, as the others in this thread are on ati and you are on nvidia. Note though that I originally thought this looked like an old nvidia issue - you might want to look up those nvidia theads and/or try the open source driver(s) to confirm whether it is an issue with nvidia.
Similar Messages
-
I have already swapped this phone out once for a new I phone 6. First one I was having same issues with.
Now I got the new one and it was good for about a month and now its doing it to but worse. It freezes completely.
Won't let any of my text messages get through to me. All my messages disappear completely and randomly come back when they feel like it.
This time its frozen where I can't even read any texts or get any texts and when I click on the messenger app it just goes to the NEW MESSAGE and won't let me get out of this screen. Should I once again take this back? or are all the iPhone 6's bad like this?It's not the iphones, it's more likely one or more of your programs causing this issue. It's not the iPhone 6's. The possibility of you getting 2 bad iphones from different batches is extremely remote or you have the worst luck on the planet. lol If one iPhone has it, then you get a new one and the same problem comes up again, it's most likely due to an issue with a program that you keep getting back from restoring an old backup. Restore the iphone again and set up as a new iphone. Then manually import your music and your photos. Once that's done, try to use your iphone to see if everything is ok. If it works good for a few days, then try to add some of the apps. At some point, you'll end up loading the malicious app and the problem may come back. Make sure that the apps are all updated. If you still have problems, call Apple so that they can run a diagnostic report and find out which app is causing this issue. Then you can simply delete it and/or update the app. More solutions are available but that's all I will post for now.
-
New Macbook Pro 15' with Retina Display Keeps Freezing Completely
Last week I got a Late 2013 Macbook Pro 15' with Retina Display (currently running OS X Mavericks 10.9.1) . However since last Thursday it keeps freezing. It usually happens 2-4 times in a day. The entire computer will freeze completly, I'll be unable to move the cursor with the trackpad and the keyboard freezes up as well. The only way to ameliorate the problem is by shutting down the computer by pressing down on the power button and then turning it back on. When my Mac starts up again it works completely normally. Is anyone else experiencing this issue? I recently read that this was happening to some 13' Mac's (until Apple fixed it) however I haven't been able to find information regarding the same problem on a 15' Mac. Thanks in advance!
Mine isn't new model of retina mbp.
Now I'm re-installing 10.9 and I want to try it for some times.
However my mac is out of warranty and if it is a hardware problem there are no solutions for me (logic board change costs $1.000 or so).
After reinstalling 10.9, if I'll not resolve, I want to try to change thermal grease for GPU and CPU... -
Hi all,
is there any solution, workaround or fix for the Xorg freeze bug?
Description:
Xorg freezes often, no mouse (or mouse very slow), no keyboard, cold reboot required!
Additional info:
System: ArchLinux i686, 32bit
Current packages: kernel 3.3.2-1-ARCH, Xorg 1.12.1-1, gnome 3.4.1-1, nvidia 295.33-2
AMD Phenom II X4 975, 4GB Ram, GeForce 8800GTS 512
/var/log/Xorg.0.log:
[ 5797.032] [mi] EQ overflowing. Additional events will be discarded until existing events are processed.
[ 5797.032]
[ 5797.032] Backtrace:
[ 5797.049] 0: /usr/bin/Xorg (xorg_backtrace+0x49) [0x81b6bb9]
[ 5797.050] 1: /usr/bin/Xorg (mieqEnqueue+0x223) [0x8195503]
[ 5797.050] 2: /usr/bin/Xorg (0x8048000+0x43df5) [0x808bdf5]
[ 5797.050] 3: /usr/bin/Xorg (xf86PostMotionEventM+0xf9) [0x80c5699]
[ 5797.050] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb4460000+0x33dd) [0xb44633dd]
[ 5797.050] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb4460000+0x481c) [0xb446481c]
[ 5797.050] 6: /usr/bin/Xorg (0x8048000+0x6cfd1) [0x80b4fd1]
[ 5797.050] 7: /usr/bin/Xorg (0x8048000+0x92a05) [0x80daa05]
[ 5797.050] 8: (vdso) (__kernel_sigreturn+0x0) [0xb77bd400]
[ 5797.050] 9: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0xb4a61000+0x61f06) [0xb4ac2f06]
[ 5797.050]
[ 5797.050] [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
[ 5797.050] [mi] mieq is *NOT* the cause. It is a victim.
Thanks!
Chrishi, does the nvidia driver fully support x.org 1.12 yet? I'm on AMD and the latest driver doesn't support it yet.
maybe you downgrade x.org and see if that does change anything. Put this on top of your repos in /etc/pacman.conf and do a "pacman -Suu".
[xorg111]
Server = http://catalyst.apocalypsus.net/repo/xorg111/$arch
by now there is a kernel update but other than that I have no idea. Could be a bug in the driver or gnome, too.
Last edited by andmars (2012-04-26 09:10:03) -
Hi
I installed Solaris 10 in a Toshiba A10. I'm using it with no problems, but if I left the computer idle (without keyboard/mouse input) for about
20 minutes, Xorg freezes (at window manager, dtlogin greeting, xlock, ... any place)
Accesing the machine (telnet/ssh works fine) and killing Xorg resets to dtlogin greeting screen.
/var/adm/messages, /var/log/Xorg.0.log, /var/dt/Xerrors give me no clues
Latest patches are installed, many bios options was tried
Any ideas, please ?
thanksI configured full power. X freezes with image on screen (no blank screen). I suspect of usb (kbd and mouse are usb). Disabling legacy keyboard emulation had no effect.
-
Xorg freeze when my mouse moves from one screen to another :/
Hello,
I have a computer with two graphics cards nvidia:
- GeForce 7300 SE/7200 GS on a PCI Express port
- GeForce FX 5200 sur on a PCI port
I use 3 screens:
- 2 on PCI Express card, one on the DVI port and one on the VGA port
- 1 on the VGA port of the PCI card
I configured my BIOS for my motherboard that has an integrated chip to boot the PCI Express card. I configured my xorg.conf to have a TwinView display mode on my two screens of the PCI Express card and to have the screen on the PCI card separately.
1 week ago my setup worked great, no worries. Since I rebooted my PC, when I slide my mouse from the PCI Express screens to the PCI screen my xorg freeze and I can't switch to a console with ctrl + alt + F1. My PC is still available in SSH but can't kill the Xorg process with a kill -9. I had to make 2 / 3 update between two reboot, I think it must come from there: surely a problem with a kernel update or nvidia driver update ...
Here I am lost, I do not know what to do to rectify the situation. If someone has an idea ... I'm taker
The only mistakes I saw in log that could be related:
error.log - kernel: pci 0000:04:05.0: BAR 6: address space collision on of device [0xfd000000-0xfd01ffff]
log xorg
Call Trace:
[<ffffffff81254723>] ? vga_get+0x113/0x170
[<ffffffff8104e1e0>] ? default_wake_function+0x0/0x20
[<ffffffff812549b0>] ? vga_arb_write+0x230/0x510
[<ffffffff81114dd8>] ? vfs_write+0xb8/0x1a0
[<ffffffff81114fae>] ? sys_write+0x4e/0x90
[<ffffffff81012ecb>] ? device_not_available+0x1b/0x20
[<ffffffff81012082>] ? system_call_fastpath+0x16/0x1b
INFO: task X:1552 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
X D ffff88007f733c30 0 1552 1 0x00400004
ffff88007f733c30 0000000000000086 ffff88007e03bdb8 ffff88007100383f
ffffffff8141f589 ffffffff8141f587 ffff88007eb00d60 ffff88007e03a000
ffff88007f733ed8 000000000000f908 ffff88007f733ed8 ffff88007e03a000
Call Trace:
[<ffffffff81254723>] ? vga_get+0x113/0x170
[<ffffffff8104e1e0>] ? default_wake_function+0x0/0x20
[<ffffffff812549b0>] ? vga_arb_write+0x230/0x510
[<ffffffff81114dd8>] ? vfs_write+0xb8/0x1a0
[<ffffffff81114fae>] ? sys_write+0x4e/0x90
[<ffffffff81012ecb>] ? device_not_available+0x1b/0x20
[<ffffffff81012082>] ? system_call_fastpath+0x16/0x1b
Thanks in advance.I'm suddenly having the same problem. Find a cure yet?
-
Fire fox crashes and freezes if i use it too much (kind of a good thing). For example if i use stumble fire fox will start to slow down then freeze completely. I am using windows XP pro and a pretty decent computer. All software is up to date and i do no have a virus. I have even tried to disable my add-ons and plug-ins but it did not make a difference. Does anyone have a solution or should i just switch to chrome?
Please provide a crash id -> https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report
Do the issues still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode -
What could cause my MacBook Pro runing under 10.6.7 to freeze completely?
Hi,
It happen once and a while that my MacBook Pro freezes completely.
I have done the 10.6.7 update but I am not sure if the problem is related.
I know the problem could be related to many factors but I am trying to create some kind of check list before I reinstall...
This happen randomly. It could happen with one app open or several.
What would you do to solve this issue?
Thanks for your help,
Macly yours,
OlivierHi,
Thank you for your respond. I guess this brings me to the Apple tech service as your conclusion involve a hardware evaluation (bad memory module). I installed fan control that shows an average temperature of 47° and fan speed at 2000 RPM but doesn't tell me much as if it is good or bad...
Macly yours,
Olivier -
Safari slows down/freezes completely when streaming video
I do not usually have this problem, and it is not with every site. Certain sites with embedded video content (YouTube, Google Video, etc.) do not have this problem. This problem only occurs when I attempt to stream from a video link.
This is how the scenario goes almost every time:
I click the link, Safari goes to a blank page with the QuickTime symbol in the middle. Soon after (5-15 seconds), the mouse beachball occurs and Safari basically freezes. If it does not freeze, it will lock up for about 10 minutes, the fans in my Mac Mini will go wild (spinning abnormally fast as if attempting to process a very, very large app or task. It is also quite loud for any type of computer or process. This problem also occurs when Safari freezes completely) and will eventually cause my computer to lock up entirely. I have had this problem for about 5 months now, and have looked at the forums to try and solve this problem numerous times (there is no Rosetta check box on my version of Safari btw, so I could not attempt that fix; I deleted my QT plugin and restarted Safari; I attempted the various fixes with QT in System Pref and MIME pref). I would appreciate if none of those answers would be listed.
Please, if anyone has any clue how this problem works and how to fix it, let me know. This has been plaguing my computer for far too long.I did not make myself clear enough: the link does not open a new page, but rather in the same page as the original site. In other words, the video opens and plays in Safari in the same page. I do have a program, Flip4Mac, that deals with video, but I do not believe it affects QT movies because it apparently only deals with .wmv files and not .mpeg or .mpg files. My QT is also Pro, by the way.
When I stream the movies (if this is considered streaming), I let them download fully in Safari before playing them. I know when the video is beginning to load because a preview (screenshot, per say) of the beginning of the video appears and the QT menu (status bar, play/pause buttons, etc.) appears around the video. Unfortunately, Safari usually never gets to that point and locks up before the video even begins to load.
Also, when I adjusted the MIME settings, I messed around with the video, miscellaneous, and streaming tabs. I attempted to try each change with a restarted Safari with no luck. Are there any other MIME settings I should be looking at? If not, how else could I attempt to fix this problem? I have tried downloading the video, and it works from there, but it takes about 10 min. to download when it takes only about 30 seconds to stream/download in Safari. Thus, I would prefer it working in Safari, not only for convenience, but because I don't like problems going unsolved on my computer. Thanks to all so far for giving advice, at least. -
[SOLVED] Xorg freeze with nvidia GeForce 210 when resizing terminal
Hello,
I am working on Archlinux. My computer freeze when I resize a terminal window.
To reproduce the problem, I follow the below steps :
1- launch openbox (with tint2, xcompmgr and nitrogen)
2- start the "terminal" console emulator (with true transparent background)
3- launch opera and go to a website which take a while to load (with a lot of data) (I used http://www.lemonde.fr)
4- while the website is loading, switch to the terminal window and double click on the title bar to maximize it
5- the box freeze
I am not able to take the control back. I cannot exit or kill Xorg / Openbox. I cannot switch to a text terminal (ttyx). No key sequence is working.
Only a hard reset of the box is working.
I have tried to disable the transparent background of the terminal window without success.
I have tried to not start xcompmgr without success.
The problem also occurs with rxvt-unicode instead of terminal.
It seems the problem happens more often when using console emulator based on vte.
vte itself has the same issue.
The only workaround I have found is to disable the harware acceleration with the below parameter in the xorg.conf file:
Option "RenderAccel" "true"
The problem with this workaround are poor graphical performances.
Could you please let me know if you have any idea / clue to identify / fix this problem ?
Thanks and regards
uname -a
Linux myhost 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz GenuineIntel GNU/Linux
versions
nvidia 270.41.06-1
nvidia-utils 270.41.06-1
kernel26 2.6.38.4-1
openbox 3.4.11.2-2
xcompmgr 1.1.5-1
.xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
exec ck-launch-session openbox-session
.config/openbox/autostart.sh
# This shell script is run before Openbox launches.
# Environment variables set here are passed to the Openbox session.
# Set a background color
BG=""
if which hsetroot >/dev/null 2>&1; then
BG=hsetroot
else
if which esetroot >/dev/null 2>&1; then
BG=esetroot
else
if which xsetroot >/dev/null 2>&1; then
BG=xsetroot
fi
fi
fi
test -z $BG || $BG -solid "#303030"
# D-bus
if which dbus-launch >/dev/null 2>&1 && test -z "$DBUS_SESSION_BUS_ADDRESS"; then
eval `dbus-launch --sh-syntax --exit-with-session`
fi
# Make GTK apps look and behave how they were set up in the gnome config tools
if test -x /usr/libexec/gnome-settings-daemon >/dev/null; then
/usr/libexec/gnome-settings-daemon &
elif which gnome-settings-daemon >/dev/null 2>&1; then
gnome-settings-daemon &
# Make GTK apps look and behave how they were set up in the XFCE config tools
elif which xfce-mcs-manager >/dev/null 2>&1; then
xfce-mcs-manager n &
fi
# Preload stuff for KDE apps
if which start_kdeinit >/dev/null 2>&1; then
LD_BIND_NOW=true start_kdeinit --new-startup +kcminit_startup &
fi
# Run XDG autostart things. By default don't run anything desktop-specific
# See xdg-autostart --help more info
DESKTOP_ENV="OPENBOX"
if which /usr/lib/openbox/xdg-autostart >/dev/null 2>&1; then
/usr/lib/openbox/xdg-autostart $DESKTOP_ENV
fi
xcompmgr &
nitrogen --set-zoom-fill /mnt/data/pictures/flower.jpg &
tint2 &
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "extmod"
Load "glx"
Load "record"
Load "dbe"
Load "dri2"
EndSection
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
Option "RenderAccel" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Xorg.0.log
[ 485.566]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 485.566] X Protocol Version 11, Revision 0
[ 485.566] Build Operating System: Linux 2.6.38-ARCH i686
[ 485.566] Current Operating System: Linux myhost 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011 i686
[ 485.566] Kernel command line: root=/dev/sda3 ro
[ 485.566] Build Date: 16 April 2011 12:05:35PM
[ 485.566]
[ 485.566] Current version of pixman: 0.20.2
[ 485.567] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 485.567] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 485.567] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 27 20:00:28 2011
[ 485.567] (==) Using config file: "/etc/X11/xorg.conf"
[ 485.568] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 485.568] (==) ServerLayout "X.org Configured"
[ 485.568] (**) |-->Screen "Screen0" (0)
[ 485.568] (**) | |-->Monitor "Monitor0"
[ 485.568] (**) | |-->Device "Card0"
[ 485.568] (**) |-->Input Device "Mouse0"
[ 485.568] (**) |-->Input Device "Keyboard0"
[ 485.568] (==) Automatically adding devices
[ 485.568] (==) Automatically enabling devices
[ 485.568] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 485.568] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 485.568] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 485.568] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 485.568] (**) Extension "Composite" is enabled
[ 485.568] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 485.568] (WW) Disabling Mouse0
[ 485.568] (WW) Disabling Keyboard0
[ 485.568] (II) Loader magic: 0x81f4ee0
[ 485.568] (II) Module ABI versions:
[ 485.568] X.Org ANSI C Emulation: 0.4
[ 485.568] X.Org Video Driver: 10.0
[ 485.568] X.Org XInput driver : 12.2
[ 485.568] X.Org Server Extension : 5.0
[ 485.569] (--) PCI:*(0:1:0:0) 10de:0a65:1043:8334 rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
[ 485.569] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 485.569] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "dri" will be loaded by default.
[ 485.569] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) LoadModule: "extmod"
[ 485.569] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 485.569] (II) Module extmod: vendor="X.Org Foundation"
[ 485.569] compiled for 1.10.1, module version = 1.0.0
[ 485.569] Module class: X.Org Server Extension
[ 485.569] ABI class: X.Org Server Extension, version 5.0
[ 485.569] (II) Loading extension MIT-SCREEN-SAVER
[ 485.569] (II) Loading extension XFree86-VidModeExtension
[ 485.569] (II) Loading extension XFree86-DGA
[ 485.569] (II) Loading extension DPMS
[ 485.569] (II) Loading extension XVideo
[ 485.569] (II) Loading extension XVideo-MotionCompensation
[ 485.569] (II) Loading extension X-Resource
[ 485.569] (II) LoadModule: "glx"
[ 485.569] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 485.588] (II) Module glx: vendor="NVIDIA Corporation"
[ 485.588] compiled for 4.0.2, module version = 1.0.0
[ 485.589] Module class: X.Org Server Extension
[ 485.589] (II) NVIDIA GLX Module 270.41.06 Mon Apr 18 15:11:28 PDT 2011
[ 485.589] (II) Loading extension GLX
[ 485.589] (II) LoadModule: "record"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 485.589] (II) Module record: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.13.0
[ 485.589] Module class: X.Org Server Extension
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension RECORD
[ 485.589] (II) LoadModule: "dbe"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 485.589] (II) Module dbe: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.0.0
[ 485.589] Module class: X.Org Server Extension
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension DOUBLE-BUFFER
[ 485.589] (II) LoadModule: "dri2"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 485.589] (II) Module dri2: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.2.0
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension DRI2
[ 485.589] (II) LoadModule: "dri"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 485.589] (II) Module dri: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.0.0
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension XFree86-DRI
[ 485.589] (II) LoadModule: "nvidia"
[ 485.589] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 485.590] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 485.590] compiled for 4.0.2, module version = 1.0.0
[ 485.590] Module class: X.Org Video Driver
[ 485.590] (II) NVIDIA dlloader X Driver 270.41.06 Mon Apr 18 14:55:51 PDT 2011
[ 485.590] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 485.590] (--) using VT number 7
[ 485.593] (II) Loading sub module "fb"
[ 485.593] (II) LoadModule: "fb"
[ 485.593] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 485.593] (II) Module fb: vendor="X.Org Foundation"
[ 485.593] compiled for 1.10.1, module version = 1.0.0
[ 485.593] ABI class: X.Org ANSI C Emulation, version 0.4
[ 485.593] (II) Loading sub module "wfb"
[ 485.593] (II) LoadModule: "wfb"
[ 485.593] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 485.593] (II) Module wfb: vendor="X.Org Foundation"
[ 485.593] compiled for 1.10.1, module version = 1.0.0
[ 485.593] ABI class: X.Org ANSI C Emulation, version 0.4
[ 485.593] (II) Loading sub module "ramdac"
[ 485.593] (II) LoadModule: "ramdac"
[ 485.593] (II) Module "ramdac" already built-in
[ 485.593] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 485.593] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 485.593] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 485.593] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 485.593] (==) NVIDIA(0): RGB weight 888
[ 485.593] (==) NVIDIA(0): Default visual is TrueColor
[ 485.593] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 485.593] (**) NVIDIA(0): Option "RenderAccel" "true"
[ 485.593] (**) NVIDIA(0): Enabling RENDER acceleration
[ 485.953] (II) NVIDIA(GPU-0): Display (LG Electronics L222W (CRT-0)) does not support NVIDIA
[ 485.953] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 485.986] (II) NVIDIA(GPU-0): Display (PANASONIC-TV (DFP-1)) does not support NVIDIA 3D
[ 485.986] (II) NVIDIA(GPU-0): Vision stereo.
[ 485.987] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
[ 485.987] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 485.987] (--) NVIDIA(0): VideoBIOS: 70.18.39.00.17
[ 485.987] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 485.987] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 485.987] (--) NVIDIA(0): Connected display device(s) on GeForce 210 at PCI:1:0:0
[ 485.987] (--) NVIDIA(0): LG Electronics L222W (CRT-0)
[ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1)
[ 485.987] (--) NVIDIA(0): LG Electronics L222W (CRT-0): 400.0 MHz maximum pixel clock
[ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1): 165.0 MHz maximum pixel clock
[ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1): Internal Single Link TMDS
[ 486.026] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 486.026] (==) NVIDIA(0):
[ 486.026] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 486.026] (==) NVIDIA(0): will be used as the requested mode.
[ 486.026] (==) NVIDIA(0):
[ 486.026] (II) NVIDIA(0): Validated modes:
[ 486.026] (II) NVIDIA(0): "nvidia-auto-select"
[ 486.026] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 486.054] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[ 486.054] (--) NVIDIA(0): option
[ 486.054] (--) Depth 24 pixmap format is 32 bpp
[ 486.054] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 486.056] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 486.056] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 486.056] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 486.056] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 486.056] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 486.056] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 486.056] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 486.056] (II) NVIDIA(0): Config Options in the README.
[ 486.058] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 486.286] (II) Loading extension NV-GLX
[ 486.314] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 486.314] (==) NVIDIA(0): Backing store disabled
[ 486.314] (==) NVIDIA(0): Silken mouse enabled
[ 486.314] (==) NVIDIA(0): DPMS enabled
[ 486.314] (II) Loading extension NV-CONTROL
[ 486.315] (II) Loading extension XINERAMA
[ 486.315] (II) Loading sub module "dri2"
[ 486.315] (II) LoadModule: "dri2"
[ 486.315] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 486.315] (II) Module dri2: vendor="X.Org Foundation"
[ 486.315] compiled for 1.10.1, module version = 1.2.0
[ 486.315] ABI class: X.Org Server Extension, version 5.0
[ 486.315] (II) NVIDIA(0): [DRI2] Setup complete
[ 486.315] (==) RandR enabled
[ 486.315] (II) Initializing built-in extension Generic Event Extension
[ 486.315] (II) Initializing built-in extension SHAPE
[ 486.315] (II) Initializing built-in extension MIT-SHM
[ 486.315] (II) Initializing built-in extension XInputExtension
[ 486.315] (II) Initializing built-in extension XTEST
[ 486.315] (II) Initializing built-in extension BIG-REQUESTS
[ 486.315] (II) Initializing built-in extension SYNC
[ 486.315] (II) Initializing built-in extension XKEYBOARD
[ 486.315] (II) Initializing built-in extension XC-MISC
[ 486.315] (II) Initializing built-in extension SECURITY
[ 486.315] (II) Initializing built-in extension XINERAMA
[ 486.315] (II) Initializing built-in extension XFIXES
[ 486.315] (II) Initializing built-in extension RENDER
[ 486.315] (II) Initializing built-in extension RANDR
[ 486.315] (II) Initializing built-in extension COMPOSITE
[ 486.315] (II) Initializing built-in extension DAMAGE
[ 486.317] (II) Initializing extension GLX
[ 486.364] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 486.364] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 486.364] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 486.364] (II) LoadModule: "evdev"
[ 486.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.365] (II) Module evdev: vendor="X.Org Foundation"
[ 486.365] compiled for 1.10.0, module version = 2.6.0
[ 486.365] Module class: X.Org XInput Driver
[ 486.365] ABI class: X.Org XInput driver, version 12.2
[ 486.365] (II) Using input driver 'evdev' for 'Power Button'
[ 486.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.365] (**) Power Button: always reports core events
[ 486.365] (**) Power Button: Device: "/dev/input/event1"
[ 486.376] (--) Power Button: Found keys
[ 486.376] (II) Power Button: Configuring as keyboard
[ 486.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 486.376] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 486.376] (**) Option "xkb_rules" "evdev"
[ 486.376] (**) Option "xkb_model" "evdev"
[ 486.376] (**) Option "xkb_layout" "fr"
[ 486.397] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 486.397] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 486.397] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 486.397] (II) Using input driver 'evdev' for 'Power Button'
[ 486.397] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.397] (**) Power Button: always reports core events
[ 486.397] (**) Power Button: Device: "/dev/input/event0"
[ 486.413] (--) Power Button: Found keys
[ 486.413] (II) Power Button: Configuring as keyboard
[ 486.413] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 486.413] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 486.413] (**) Option "xkb_rules" "evdev"
[ 486.413] (**) Option "xkb_model" "evdev"
[ 486.413] (**) Option "xkb_layout" "fr"
[ 486.415] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event2)
[ 486.415] (II) No input driver/identifier specified (ignoring)
[ 486.418] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3)
[ 486.418] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 486.418] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
[ 486.418] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 486.418] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.418] (**) Microsoft Wired Keyboard 600: always reports core events
[ 486.418] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event3"
[ 486.430] (--) Microsoft Wired Keyboard 600: Found keys
[ 486.430] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
[ 486.430] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.0/input/input3/event3"
[ 486.430] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
[ 486.430] (**) Option "xkb_rules" "evdev"
[ 486.430] (**) Option "xkb_model" "evdev"
[ 486.430] (**) Option "xkb_layout" "fr"
[ 486.430] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
[ 486.430] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 486.430] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
[ 486.430] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 486.430] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.430] (**) Microsoft Wired Keyboard 600: always reports core events
[ 486.430] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
[ 486.446] (--) Microsoft Wired Keyboard 600: Found 1 mouse buttons
[ 486.446] (--) Microsoft Wired Keyboard 600: Found scroll wheel(s)
[ 486.446] (--) Microsoft Wired Keyboard 600: Found relative axes
[ 486.446] (--) Microsoft Wired Keyboard 600: Found absolute axes
[ 486.446] (--) Microsoft Wired Keyboard 600: Found x and y absolute axes
[ 486.446] (--) Microsoft Wired Keyboard 600: Found keys
[ 486.446] (II) Microsoft Wired Keyboard 600: Configuring as mouse
[ 486.446] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
[ 486.446] (II) Microsoft Wired Keyboard 600: Adding scrollwheel support
[ 486.446] (**) Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[ 486.446] (**) Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 486.446] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.1/input/input4/event4"
[ 486.446] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
[ 486.446] (**) Option "xkb_rules" "evdev"
[ 486.446] (**) Option "xkb_model" "evdev"
[ 486.446] (**) Option "xkb_layout" "fr"
[ 486.447] (EE) Microsoft Wired Keyboard 600: failed to initialize for relative axes.
[ 486.447] (WW) Microsoft Wired Keyboard 600: found 37 axes, limiting to 36.
[ 486.447] (II) Microsoft Wired Keyboard 600: initialized for absolute axes.
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[ 486.447] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[ 486.447] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
[ 486.447] (II) No input driver/identifier specified (ignoring)
[ 486.447] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[ 486.447] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 486.447] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 486.447] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.447] (**) Logitech USB Optical Mouse: always reports core events
[ 486.447] (**) Logitech USB Optical Mouse: Device: "/dev/input/event5"
[ 486.473] (--) Logitech USB Optical Mouse: Found 12 mouse buttons
[ 486.473] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
[ 486.473] (--) Logitech USB Optical Mouse: Found relative axes
[ 486.473] (--) Logitech USB Optical Mouse: Found x and y relative axes
[ 486.473] (II) Logitech USB Optical Mouse: Configuring as mouse
[ 486.473] (II) Logitech USB Optical Mouse: Adding scrollwheel support
[ 486.473] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 486.473] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 486.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-2/9-2:1.0/input/input5/event5"
[ 486.473] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
[ 486.473] (II) Logitech USB Optical Mouse: initialized for relative axes.
[ 486.473] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 486.473] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 486.473] (II) No input driver/identifier specified (ignoring)
[ 525.530] (WW) NVIDIA(0): The NVIDIA X driver has encountered too many errors. Falling
[ 525.530] (WW) NVIDIA(0): back to write-back cached memory.
dmesg.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110415 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
[ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5B-Deluxe, BIOS 1238 09/30/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 7fdd0000 - 7ff80000
[ 0.000000] Allocated new RAMDISK: 3764e000 - 377fd262
[ 0.000000] Move RAMDISK from 000000007fdd0000 - 000000007ff7f261 to 3764e000 - 377fd261
[ 0.000000] ACPI: RSDP 000fae70 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 7ff90100 0004C (v01 MSTEST OEMXSDT 09000830 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ff90290 000F4 (v03 MSTEST OEMFACP 09000830 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ff905c0 0918E (v01 A0483 A0483035 00000035 INTL 20060113)
[ 0.000000] ACPI: FACS 7ff9e000 00040
[ 0.000000] ACPI: APIC 7ff90390 0006C (v01 MSTEST OEMAPIC 09000830 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ff90400 0003C (v01 MSTEST OEMMCFG 09000830 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ff9e040 0007B (v01 MSTEST AMI_OEM 09000830 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ff99750 00038 (v01 MSTEST OEMHPET 09000830 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007ff90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007ff90
[ 0.000000] On node 0 totalpages: 524062
[ 0.000000] free_area_init_node: node 0, pgdat c1450b00, node_mem_map f664d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294530 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27392 r0 d21760 u1048576
[ 0.000000] pcpu-alloc: s27392 r0 d21760 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519966
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 10483200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007ff90)
[ 0.000000] Memory: 2061020k/2096704k available (3182k kernel code, 35228k reserved, 1259k data, 424k init, 1187400k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1457000 - 0xc14c1000 ( 424 kB)
[ 0.000000] .data : 0xc131bacb - 0xc1456a00 (1259 kB)
[ 0.000000] .text : 0xc1000000 - 0xc131bacb (3182 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f500c000 soft=f500e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3066.221 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6134.96 BogoMIPS (lpj=10220736)
[ 0.003418] pid_max: default: 32768 minimum: 301
[ 0.003486] Security Framework initialized
[ 0.003528] AppArmor: AppArmor disabled by boot time parameter
[ 0.006682] Mount-cache hash table entries: 512
[ 0.006865] Initializing cgroup subsys ns
[ 0.006906] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.006960] Initializing cgroup subsys cpuacct
[ 0.007007] Initializing cgroup subsys memory
[ 0.007052] Initializing cgroup subsys devices
[ 0.007092] Initializing cgroup subsys freezer
[ 0.007133] Initializing cgroup subsys net_cls
[ 0.007172] Initializing cgroup subsys blkio
[ 0.007238] CPU: Physical Processor ID: 0
[ 0.007277] CPU: Processor Core ID: 0
[ 0.007317] mce: CPU supports 6 MCE banks
[ 0.007361] CPU0: Thermal monitoring enabled (TM2)
[ 0.007402] using mwait in idle threads.
[ 0.008216] ACPI: Core revision 20110112
[ 0.013386] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.013726] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046907] CPU0: Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz stepping 0a
[ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.049997] ... version: 2
[ 0.049997] ... bit width: 40
[ 0.049997] ... generic registers: 2
[ 0.049997] ... value mask: 000000ffffffffff
[ 0.049997] ... max period: 000000007fffffff
[ 0.049997] ... fixed-purpose events: 3
[ 0.049997] ... event mask: 0000000700000003
[ 0.056745] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.070012] CPU 1 irqstacks, hard=f50d6000 soft=f50d8000
[ 0.070017] Booting Node 0, Processors #1
[ 0.006666] Initializing CPU#1
[ 0.166676] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.169997] Brought up 2 CPUs
[ 0.170040] Total of 2 processors activated (12270.81 BogoMIPS).
[ 0.171248] devtmpfs: initialized
[ 0.171248] NET: Registered protocol family 16
[ 0.171248] ACPI: bus type pci registered
[ 0.171248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.171248] PCI: not using MMCONFIG
[ 0.171248] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.171248] PCI: Using configuration type 1 for base access
[ 0.171248] bio: create slab <bio-0> at 0
[ 0.173388] ACPI: EC: Look up EC in DSDT
[ 0.174194] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.179022] ACPI: SSDT 7ff9e0c0 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.179316] ACPI: Dynamic OEM Table Load:
[ 0.179408] ACPI: SSDT (null) 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.179643] ACPI: SSDT 7ff9e2d0 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.179932] ACPI: Dynamic OEM Table Load:
[ 0.180025] ACPI: SSDT (null) 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.180248] ACPI: Interpreter enabled
[ 0.180292] ACPI: (supports S0 S3 S4 S5)
[ 0.180445] ACPI: Using IOAPIC for interrupt routing
[ 0.180500] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.180904] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.180958] PCI: Using MMCONFIG for extended config space
[ 0.185933] ACPI: No dock devices found.
[ 0.185973] HEST: Table not found.
[ 0.186014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.186114] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.186260] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.186304] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.186346] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.186398] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.186450] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff]
[ 0.186509] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
[ 0.186539] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
[ 0.186562] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.186564] pci 0000:00:01.0: PME# disabled
[ 0.186592] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.186625] pci 0000:00:1a.0: reg 20: [io 0xa880-0xa89f]
[ 0.186660] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.186692] pci 0000:00:1a.1: reg 20: [io 0xac00-0xac1f]
[ 0.186724] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.186740] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
[ 0.186797] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.186801] pci 0000:00:1a.7: PME# disabled
[ 0.186817] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.186829] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[ 0.186873] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.186876] pci 0000:00:1b.0: PME# disabled
[ 0.186891] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.186935] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.186938] pci 0000:00:1c.0: PME# disabled
[ 0.186956] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
[ 0.187000] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.187003] pci 0000:00:1c.4: PME# disabled
[ 0.187019] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
[ 0.187063] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.187066] pci 0000:00:1c.5: PME# disabled
[ 0.187082] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.187114] pci 0000:00:1d.0: reg 20: [io 0xa400-0xa41f]
[ 0.187137] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.187170] pci 0000:00:1d.1: reg 20: [io 0xa480-0xa49f]
[ 0.187193] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.187226] pci 0000:00:1d.2: reg 20: [io 0xa800-0xa81f]
[ 0.187256] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.187272] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
[ 0.187329] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.187333] pci 0000:00:1d.7: PME# disabled
[ 0.187346] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.187393] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
[ 0.187462] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.188664] pci 0000:00:1f.2: [8086:2821] type 0 class 0x000106
[ 0.188677] pci 0000:00:1f.2: reg 10: [io 0xa080-0xa087]
[ 0.188684] pci 0000:00:1f.2: reg 14: [io 0xa000-0xa003]
[ 0.188690] pci 0000:00:1f.2: reg 18: [io 0x9c00-0x9c07]
[ 0.188696] pci 0000:00:1f.2: reg 1c: [io 0x9880-0x9883]
[ 0.188703] pci 0000:00:1f.2: reg 20: [io 0x9800-0x981f]
[ 0.188709] pci 0000:00:1f.2: reg 24: [mem 0xf9fff000-0xf9fff7ff]
[ 0.188733] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.188736] pci 0000:00:1f.2: PME# disabled
[ 0.188747] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.188756] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.188778] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.188824] pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300
[ 0.188832] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.188841] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.188849] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.188856] pci 0000:01:00.0: reg 24: [io 0xbc00-0xbc7f]
[ 0.188862] pci 0000:01:00.0: reg 30: [mem 0xfbc00000-0xfbc7ffff pref]
[ 0.188895] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[ 0.188903] pci 0000:01:00.1: reg 10: [mem 0xfbcfc000-0xfbcfffff]
[ 0.188969] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.189011] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.189014] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.189017] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.189048] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.189091] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.189094] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.189098] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.189144] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.189223] pci 0000:03:00.0: reg 24: [mem 0xfbefe000-0xfbefffff]
[ 0.189236] pci 0000:03:00.0: reg 30: [mem 0xfbee0000-0xfbeeffff pref]
[ 0.189263] pci 0000:03:00.0: PME# supported from D3hot
[ 0.189268] pci 0000:03:00.0: PME# disabled
[ 0.189293] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.189315] pci 0000:03:00.1: reg 10: [io 0xdc00-0xdc07]
[ 0.189327] pci 0000:03:00.1: reg 14: [io 0xd880-0xd883]
[ 0.189339] pci 0000:03:00.1: reg 18: [io 0xd800-0xd807]
[ 0.189351] pci 0000:03:00.1: reg 1c: [io 0xd480-0xd483]
[ 0.189363] pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f]
[ 0.189426] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.189491] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.189533] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.189536] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.189540] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.189589] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
[ 0.189609] pci 0000:02:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 0.189620] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff]
[ 0.189658] pci 0000:02:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 0.189693] pci 0000:02:00.0: supports D1 D2
[ 0.189694] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.189698] pci 0000:02:00.0: PME# disabled
[ 0.193338] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.193385] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.193390] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.193397] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.193434] pci 0000:05:02.0: [1033:0035] type 0 class 0x000c03
[ 0.193452] pci 0000:05:02.0: reg 10: [mem 0xfbffd000-0xfbffdfff]
[ 0.193514] pci 0000:05:02.0: supports D1 D2
[ 0.193516] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.193519] pci 0000:05:02.0: PME# disabled
[ 0.193533] pci 0000:05:02.1: [1033:0035] type 0 class 0x000c03
[ 0.193546] pci 0000:05:02.1: reg 10: [mem 0xfbffe000-0xfbffefff]
[ 0.193601] pci 0000:05:02.1: supports D1 D2
[ 0.193602] pci 0000:05:02.1: PME# supported from D0 D1 D2 D3hot
[ 0.193605] pci 0000:05:02.1: PME# disabled
[ 0.193619] pci 0000:05:02.2: [1033:00e0] type 0 class 0x000c03
[ 0.193633] pci 0000:05:02.2: reg 10: [mem 0xfbfffc00-0xfbfffcff]
[ 0.193687] pci 0000:05:02.2: supports D1 D2
[ 0.193689] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
[ 0.193692] pci 0000:05:02.2: PME# disabled
[ 0.193711] pci 0000:05:03.0: [104c:8023] type 0 class 0x000c00
[ 0.193726] pci 0000:05:03.0: reg 10: [mem 0xfbfff000-0xfbfff7ff]
[ 0.193735] pci 0000:05:03.0: reg 14: [mem 0xfbff8000-0xfbffbfff]
[ 0.193786] pci 0000:05:03.0: supports D1 D2
[ 0.193787] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.193791] pci 0000:05:03.0: PME# disabled
[ 0.193806] pci 0000:05:04.0: [11ab:4320] type 0 class 0x000200
[ 0.193823] pci 0000:05:04.0: reg 10: [mem 0xfbff4000-0xfbff7fff]
[ 0.193831] pci 0000:05:04.0: reg 14: [io 0xe800-0xe8ff]
[ 0.193867] pci 0000:05:04.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]
[ 0.193886] pci 0000:05:04.0: supports D1 D2
[ 0.193888] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193891] pci 0000:05:04.0: PME# disabled
[ 0.193926] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.193971] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.193974] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.193978] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.193980] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.193982] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.193983] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.193985] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.193987] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.194003] pci_bus 0000:00: on NUMA node 0
[ 0.194005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.194127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.194156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.194243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.194277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.194313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.194355] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.199969] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.200342] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.200724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.201105] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.201486] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.201868] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.202249] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.202634] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.203051] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.203107] vgaarb: loaded
[ 0.203206] PCI: Using ACPI for IRQ routing
[ 0.203247] PCI: pci_cache_line_size set to 64 bytes
[ 0.203358] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.203360] reserve RAM buffer: 000000007ff90000 - 000000007fffffff
[ 0.203439] NetLabel: Initializing
[ 0.203478] NetLabel: domain hash size = 128
[ 0.203518] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.203565] NetLabel: unlabeled traffic allowed by default
[ 0.203608] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.203653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.203797] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.210012] Switching to clocksource hpet
[ 0.211034] pnp: PnP ACPI init
[ 0.211084] ACPI: bus type pnp registered
[ 0.211173] pnp 00:00: [bus 00-ff]
[ 0.211175] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.211177] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.211179] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.211180] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.211182] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.211184] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.211222] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.211229] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.211267] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.211311] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.211335] pnp 00:02: [dma 4]
[ 0.211337] pnp 00:02: [io 0x0000-0x000f]
[ 0.211338] pnp 00:02: [io 0x0081-0x0083]
[ 0.211339] pnp 00:02: [io 0x0087]
[ 0.211341] pnp 00:02: [io 0x0089-0x008b]
[ 0.211342] pnp 00:02: [io 0x008f]
[ 0.211343] pnp 00:02: [io 0x00c0-0x00df]
[ 0.211367] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.211374] pnp 00:03: [io 0x0070-0x0071]
[ 0.211380] pnp 00:03: [irq 8]
[ 0.211403] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.211412] pnp 00:04: [io 0x0061]
[ 0.211435] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.211441] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.211444] pnp 00:05: [irq 13]
[ 0.211469] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.211669] pnp 00:06: [irq 4]
[ 0.211671] pnp 00:06: [dma 0 disabled]
[ 0.211672] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.211721] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.211835] pnp 00:07: [io 0x0000-0xffffffff disabled]
[ 0.211837] pnp 00:07: [io 0x0000-0xffffffff disabled]
[ 0.211838] pnp 00:07: [io 0x0290-0x0297]
[ 0.211879] system 00:07: [io 0x0290-0x0297] has been reserved
[ 0.211922] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.211997] pnp 00:08: [io 0x0010-0x001f]
[ 0.211999] pnp 00:08: [io 0x0022-0x003f]
[ 0.212000] pnp 00:08: [io 0x0044-0x005f]
[ 0.212002] pnp 00:08: [io 0x0062-0x0063]
[ 0.212003] pnp 00:08: [io 0x0065-0x006f]
[ 0.212004] pnp 00:08: [io 0x0072-0x007f]
[ 0.212006] pnp 00:08: [io 0x0080]
[ 0.212007] pnp 00:08: [io 0x0084-0x0086]
[ 0.212008] pnp 00:08: [io 0x0088]
[ 0.212010] pnp 00:08: [io 0x008c-0x008e]
[ 0.212011] pnp 00:08: [io 0x0090-0x009f]
[ 0.212012] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.212014] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.212015] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.212016] pnp 00:08: [io 0x0800-0x087f]
[ 0.212018] pnp 00:08: [io 0x0400-0x03ff disabled]
[ 0.212019] pnp 00:08: [io 0x0480-0x04bf]
[ 0.212021] pnp 00:08: [mem 0xffafe000-0xffb0cbff]
[ 0.212022] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[ 0.212024] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.212025] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
[ 0.212026] pnp 00:08: [mem 0xfff00000-0xfffffffe]
[ 0.212028] pnp 00:08: [mem 0xfebfe000-0xfebfec00]
[ 0.212089] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.212132] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.212174] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.212216] system 00:08: [mem 0xffafe000-0xffb0cbff] could not be reserved
[ 0.212259] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.212302] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.212345] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.212388] system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved
[ 0.212430] system 00:08: [mem 0xfebfe000-0xfebfec00] has been reserved
[ 0.212473] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212521] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.212547] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.212580] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.212581] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.212625] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.212668] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.212712] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212761] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.212801] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.212844] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212967] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.212969] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.212971] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.212972] pnp 00:0c: [mem 0x00100000-0x7fffffff]
[ 0.212974] pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
[ 0.213025] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.213068] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.213111] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.213154] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.213198] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.213198] Switched to NOHz mode on CPU #0
[ 0.213237] Switched to NOHz mode on CPU #1
[ 0.213286] pnp: PnP ACPI: found 13 devices
[ 0.213326] ACPI: ACPI bus type pnp unregistered
[ 0.249481] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
[ 0.249526] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.249579] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[ 0.249632] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.249675] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80800000-0x808000ff]
[ 0.249720] pci 0000:00:1f.3: BAR 0: set to [mem 0x80800000-0x808000ff] (PCI address [0x80800000-0x808000ff])
[ 0.249775] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.249816] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.249859] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.249902] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.249956] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.250011] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.250055] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff]
[ 0.250099] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.250154] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.250195] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.250239] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.250283] pci 0000:00:1c.4: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.250338] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.250380] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.250424] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.250468] pci 0000:00:1c.5: bridge window [mem 0x80600000-0x807fffff 64bit pref]
[ 0.250523] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.250565] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.250609] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.250653] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.250702] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.250746] pci 0000:00:01.0: setting latency timer to 64
[ 0.250750] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.250792] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.250836] pci 0000:00:1c.0: setting latency timer to 64
[ 0.250840] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.250884] pci 0000:00:1c.4: setting latency timer to 64
[ 0.250890] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.250933] pci 0000:00:1c.5: setting latency timer to 64
[ 0.250938] pci 0000:00:1e.0: setting latency timer to 64
[ 0.250941] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.250943] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.250944] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.250946] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.250948] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.250949] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.250951] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbcfffff]
[ 0.250953] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.250955] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.250956] pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff]
[ 0.250958] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.250960] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.250961] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.250963] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.250965] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.250966] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.250968] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[ 0.250970] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.250972] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.250973] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.250975] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.250977] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.250978] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.250980] pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff]
[ 0.251002] NET: Registered protocol family 2
[ 0.251085] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.251263] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.251592] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.251779] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.251822] TCP reno registered
[ 0.251861] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.251907] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.252025] NET: Registered protocol family 1
[ 0.295104] pci 0000:01:00.0: Boot video device
[ 0.295141] PCI: CLS 32 bytes, default 64
[ 0.295174] Unpacking initramfs...
[ 0.317387] Freeing initrd memory: 1728k freed
[ 0.318002] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 0.318046] apm: disabled - APM is not SMP safe.
[ 0.318193] audit: initializing netlink socket (disabled)
[ 0.318243] type=2000 audit(1303935493.316:1): initialized
[ 0.318520] highmem bounce pool size: 64 pages
[ 0.318562] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.320047] VFS: Disk quotas dquot_6.5.2
[ 0.320145] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.320261] msgmni has been set to 1709
[ 0.320435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.320488] io scheduler noop registered
[ 0.320527] io scheduler deadline registered
[ 0.320574] io scheduler cfq registered (default)
[ 0.320710] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.320734] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.320771] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.320798] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.320848] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.320875] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.320923] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.320950] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.321092] intel_idle: MWAIT substates: 0x22220
[ 0.321094] intel_idle: does not run on family 6 model 23
[ 0.321105] ERST: Table is not found!
[ 0.321155] isapnp: Scanning for PnP cards...
[ 0.676796] isapnp: No Plug & Play device found
[ 0.676877] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.697390] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.920667] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.973728] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.976563] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.976631] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.976752] mousedev: PS/2 mouse device common for all mice
[ 0.976847] rtc_cmos 00:03: RTC can wake from S4
[ 1.000070] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.000137] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.000200] cpuidle: using governor ladder
[ 1.000240] cpuidle: using governor menu
[ 1.000436] TCP cubic registered
[ 1.000476] NET: Registered protocol family 17
[ 1.000521] Registering the dns_resolver key type
[ 1.000569] Using IPI No-Shortcut mode
[ 1.000679] PM: Hibernation image not present or could not be loaded.
[ 1.000682] registered taskstats version 1
[ 1.001054] rtc_cmos 00:03: setting system clock to 2011-04-27 20:18:14 UTC (1303935494)
[ 1.001128] Initalizing network drop monitor service
[ 1.001211] Freeing unused kernel memory: 424k freed
[ 1.005982] <30>udev[38]: starting version 167
[ 1.107427] SCSI subsystem initialized
[ 1.127245] libata version 3.00 loaded.
[ 1.131006] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.131057] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.131134] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.131436] scsi0 : pata_jmicron
[ 1.131554] scsi1 : pata_jmicron
[ 1.132024] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 1.132068] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.142526] ahci 0000:00:1f.2: version 3.0
[ 1.142536] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.142608] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.142644] ahci: SSS flag set, parallel bus scan disabled
[ 1.142711] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.142765] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 1.142819] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.174032] scsi2 : ahci
[ 1.174136] scsi3 : ahci
[ 1.174235] scsi4 : ahci
[ 1.174335] scsi5 : ahci
[ 1.174434] scsi6 : ahci
[ 1.174532] scsi7 : ahci
[ 1.174699] ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 44
[ 1.174752] ata4: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 44
[ 1.174804] ata5: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff200 irq 44
[ 1.174856] ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff280 irq 44
[ 1.174908] ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff300 irq 44
[ 1.174960] ata8: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 44
[ 1.175036] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level,Hi jasonwryan,
Your thread helps a lot. I saw a lot of posts but not this one.
This workaround is fine for me to wait the fix.
Thanks a lot
Workaround :
It seems the problem might be linked to transparent items like background.
As explained in the above thread :
According to the bug report the nVidia driver is freaking out and creating too many events, which causes an event buffer in Xorg to overflow. It works OK with the older Xorg, though.
So the temporary solution is to downgrade 3 packages.
Install the tool to downgrade
> yaourt -Sy downgrade
Downgrade
Note the item number can change
> downgrade xf86-input-evdev
Hit "s" key
Choose 2 (xf86-input-evdev-2.6.0-2-i686.pkg.tar.xz)
> downgrade xorg-server
Hit "s" key
Choose 1 (xorg-server-1.9.4.901-1-i686.pkg.tar.xz)
> downgrade xorg-server-common
Hit "s" key
Choose 1 (xorg-server-common-1.9.4.901-1-i686.pkg.tar.xz)
Be carefull : don't update these 3 packages when updating your system (pacman -Syu) since it is not fixed.
Last edited by shefla (2011-04-27 22:36:37) -
Ati on xorg, freeze changing vt
It's great to see xorg supported, though it has been an absurdly long wait...they seem to forget that we pay for this hardware!
When changing vt, restarting x, or shutting down i get a blank screen, if i then try to change to another vt x freezes, worse is that sometimes the screen corrupts and a gradually brightening whiteness sweeps across it, an unnerving experience!
My Xorg.0.log is apparently fine, and doesn't report this error fully, with the exception of this line:
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
This is my xorg.conf;
Section "Module"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "type1"
Load "freetype"
Load "synaptics"
Load "glx"
Load "dri"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/TTF"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
EndSection
Section "ServerFlags"
# Option "NoTrapSignals"
# Option "DontVTSwitch"
# Option "DontZap"
# Option "Dont Zoom"
# Option "DisableVidModeExtension"
# Option "AllowNonLocalXvidtune"
# Option "DisableModInDev"
# Option "AllowNonLocalModInDev"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1900"
Option "RightEdge" "5400"
Option "TopEdge" "1900"
Option "BottomEdge" "4000"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.02"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "Buttons" "5"
# Option "Resolution" "800"
# Option "SampleRate" "400"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS"
# HorizSync 31.5 - 48.5
# VertRefresh 40.0 - 75.0
EndSection
Section "Device"
Identifier "Device0"
Driver "fglrx"
Option "AGPFastWrite" "on"
Option "EnablePageFlip" "on"
Option "no_accel" "no"
Option "no_dri" "no"
Option "mtrr" "off"
Option "RenderAccel" "false"
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
Option "Capabilities" "0x00000000"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "CenterMode" "off"
Option "PseudoColorVisuals" "off"
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen0"
InputDevice "Mouse0" "SendCoreEvents"
InputDevice "Mouse1" "AlwaysCore"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
I'm completely lost with this problem, especially since there isn't any specific mention in the logs of what might be happening.
Any help is hugely appreciated.
DanI have had the same problem too when i install the fglrx driver, everything works just fine like mentioned above, and exact sympton like above too.
-
[solved] Xorg freezing on wakeup with EXA enabled
I am having a weird issue. Whenever I put my laptop to sleep and then I wake it up, Xorg seems to freeze on me. I've noticed this only happens with EXA enabled and it does not happen when the laptop hibernates. I don't have any other issues with X (as far as I can tell) and I really want to use EXA acceleration because otherwise maximizing or restoring windows and also viewing the widget dashboard in KDE 4.4 is painfully slow ... ~2-3s. With EXA, it is instantaneous and since I really put my laptop to sleep a lot, I would like to figure out what is going on.
Here is some info, let me know if you need other information:
xf86-video-ati 6.12.4-3 (xorg-video-drivers)
libgl 7.7.1-0.1
ati-dri 7.7.1-0.1
xorg-server 1.7.5.902-1 (xorg)
xorg-server-utils 7.5-3 (xorg)
xorg-utils 7.6-1 (xorg)
xorg-xinit 1.2.1-1 (xorg)
01:00.0 VGA compatible controller: ATI Technologies Inc M66-P [Mobility Radeon X1700]
xorg.conf:
Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "M66-P [Mobility Radeon X1700]"
Option "DRI" "on"
Option "DynamicPM" "on" # Dynamic powersaving.
Option "ClockGating" "on" # Assisting option for powersaving.
Option "AccelMethod" "EXA" # EXA should fit most cases.
Option "EXAVSync" "on" # EXAVSync is explained above.
Option "DMAForXv" "on" # Forced option in order to enable Xv overlay.
Option "ScalerWidth" "2048" # That should fix some very rare bugs.
Option "EnablePageFlip" "on" # It will not be enabled on R5xx cards.
Option "RenderAccel" "on" # Optional. It should be enabled by default.
Option "AccelDFS" "on" #Optional. See the man page.
Option "BusType" "PCIE"
BusID "PCI:1:0:0"
EndSection
If tried all kinds of combinations with xorg.conf ... even tried it without an xorg.conf and nothing seems to work. It either freezes on wake-up (with EXA) or KDE is slugish (anything else).
I also tried installing the ATI proprietary drivers as well, but I can't since they don't work with the updated versions of X/kernel that I have.
Does any1 have any suggestions or maybe know if it's possible to dynamically stop EXA just before suspending to RAM and enabling it on wake up?
Thanks!
[edit] forgot to mention that I am running x86_64 packages
Last edited by despotic (2010-04-18 17:09:35)Nevermind ... a system update fixed it
-
Macbook Pro 17" Mid 2009 Freezes completely.
I have a Macbook Pro 17" Unibody Mid 2009 2.8 Ghz 4GB Ram running OS X Lion 10.7.5 . Started noticing the issue when running Safari. Browser would lock up/ freeze. I would have to force quit. Thought it was a webpage issue and tried another browser. Same issue. Just started doing this last Thursday. I ran Apple AHT on it and no issues were found. I have run the disk repair and no issues were found. I believe I have gone through the steps to reset the PRAM, NVRAM and also the SMC. The lock up / Freeze issue will happen even at start up. However if I try to restart again I will have success. Currently the laptop is working as far as getting email. But I am concerned that if I open another app at the same time it will lock up / freeze.
Open the Console in the Utilities folder. Check for entries at the time of a crash and see if there are clues to the cause. If you are getting kernel panics, then post a panic log. Also, give this a try:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
After this is completed download and install OS X Lion Update 10.7.5 (Client Combo). -
Hi everyone,
I have a strange issue with xorg/ati and eclipse.
When i start eclipse, after few moment my screen becomes black several seconds (no more signal detected) and then it comes back again but i can't control the mouse neither keyboard. And black screen again... and finally all system is freezed.
Only useful message i found is in xorg log:
(EE) [mi] EQ overflow continuing. 800 events have been dropped.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x57f71d]
(EE) 1: /usr/bin/X (QueuePointerEvents+0x52) [0x44da92]
(EE) 2: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f866fef5000+0x57ed) [0x7f866fefa7ed]
(EE) 3: /usr/bin/X (0x400000+0x73b08) [0x473b08]
(EE) 4: /usr/bin/X (0x400000+0x9c030) [0x49c030]
(EE) 5: /usr/lib/libpthread.so.0 (0x7f867aa7a000+0xf830) [0x7f867aa89830]
(EE) 6: /usr/lib/libc.so.6 (ioctl+0x7) [0x7f8679bba507]
(EE) 7: /usr/lib/libdrm.so.2 (drmCommandWriteRead+0x5d) [0x7f867b7349ed]
(EE) 8: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f8674d3b000+0x30b584) [0x7f8675046584]
(EE) 9: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f8674d3b000+0x30ba85) [0x7f8675046a85]
(EE) 10: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f8674d3b000+0x2fc5a7) [0x7f86750375a7]
(EE) 11: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f8674d3b000+0x15cd92) [0x7f8674e97d92]
(EE) 12: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f8674d3b000+0x14284e) [0x7f8674e7d84e]
(EE) 13: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f8674d3b000+0x168310) [0x7f8674ea3310]
(EE) 14: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f8674d3b000+0x14263a) [0x7f8674e7d63a]
(EE) 15: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f8674d3b000+0x142f5d) [0x7f8674e7df5d]
(EE) 16: /usr/lib/xorg/modules/dri/radeonsi_dri.so (0x7f8674d3b000+0x143483) [0x7f8674e7e483]
(EE) 17: /usr/lib/libglamor.so.0 (0x7f8678587000+0x7b77) [0x7f867858eb77]
(EE) 18: /usr/lib/libglamor.so.0 (0x7f8678587000+0x8015) [0x7f867858f015]
(EE) 19: /usr/lib/libglamor.so.0 (0x7f8678587000+0x2841c) [0x7f86785af41c]
(EE) 20: /usr/bin/X (0x400000+0x105261) [0x505261]
(EE) 21: /usr/bin/X (0x400000+0x3728e) [0x43728e]
(EE) 22: /usr/bin/X (0x400000+0x268b5) [0x4268b5]
(EE) 23: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f8679afebc5]
(EE) 24: /usr/bin/X (0x400000+0x26bfd) [0x426bfd]
My system:
ArchLinux 3.10.9-1-ARCH #1 SMP PREEMPT Wed Aug 21 13:49:35 CEST 2013 x86_64 GNU/Linux
lspci:
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05)
00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 05)
00:1c.7 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 8 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 05)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Pitcairn PRO [Radeon HD 7850]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 03)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03)
07:04.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
I'm using the open source driver (xf86-video-ati) for my video card
I'm using eclipse for professional development and i need to find a solution quickly.
Thank you for any help.
Last edited by charlinux (2013-08-25 16:07:45)Welcome to Arch Linux forums, charlinux.
Please edit your post.
When pasting configs, code or command output, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through. -
IDCS3 Freezes - completely unusable
Hi,
I'm running a fully patched indesign cs3 on a fully patched xp sp3 machine. Both xp and indesign are fresh installs. My specs are:
quad core 6600, 4 gig ram, 8600 gts nvidia, 10,000 rpm hard drive.
Indesign freezes (usually for ~20-60 seconds) when I try to do anything at all. Opening a file, moving an image around, even just scrolling the page.
It seems to partially lock the OS as well. I can't open any new windows (windows-e for explorer, for example).
Please help, it's completely unusable.This kind of problem is often related to video drivers, I think, or to trying to read/write over a busy network (and that includes updating previews for images stored on the network).
Video drivers are tested by turning video hardware acceleration to zero in the troubleshooting tab of the display settings dialog. If that fixes things, you need a new driver.
Peter
Maybe you are looking for
-
All, I have two tables HEADER_TABLE and LINE_TABLE. Each header record can have multiple line records. I have to load data from a flat file to these tables.Flat file can have two types of records. H-Header, L-Line. It looks as follows.. Each H record
-
How can I stop streaming of a sound?
Hello, after asking in another Forum without getting an answer, I'm now posting here: I have a Sound var and some buttons (mc's with eventhandlers) on the stage. I have an array including URLs of some mp3 files. For every mp3 there is one button. Whe
-
Machine Attribute Check in ISE. CAN IT BE DONE?
Hello, I'm trying to build a BYOD policy in ISE 1.2. I would like ISE to get machine attributes as part of the authorization policy. Can this be done? I'm not talking about machine authentication. I need something that could be checked at an
-
Hello, I'm in the works of developing a MMORPG in java. My quest is would it be better to write it as an Application or Applet? I know writing it as an application I will be able to save, and do other things without the troubles of the *security stuf
-
Several Referenced Events. Why? And how to fix it?
How do I fix this mess? And how do I avoid it?