Xorg hang with "No Signal" on screen after incomplete -Syu

Hello everyone.
I had a uptime of ~60 days and decided it was the time to pop -Syu and take a deep breath, this time, it choked me ..
pacman -Syu was downloading almost a Gig of packages and was near the end or just started installing when the screen just got cleared suddently and showed me this ..
1888218888++++++++
Yes, nonsense, something went terribly wrong, and I did not use it meanwhile updating, it was just updating all by itself when this happened..
Afterwards I did another pacman -Syu after a reboot and it installed the last packages but startx gave me a screen without signal (No black screen or anything, just like if it was unplugged) .. The rest of the system is freezed and I cannot reach TTYs by CTRL+ALT+F-keys absolutely no response, not even by network services like SSH.
I now am in doubt, should I do a reinstall of all packages on my system to be sure this is not caused by incomplete installations/upgrades of xorg and it's parts or should I try anything else?
xinit/startx is reacting the same ..
I have not been able to find a similar problem by searching, all refer to the Xorg hotplugging which is disabled in my Xorg which bugged me on the last -Syu ..

UPDATE:
The official NVIDIA driver caused the problem since the "nv" opensource nvidia driver works fine.
[dezza@dezza ~]$ sudo pacman -Qii nvidia
Name : nvidia
Version : 180.22-1
URL : http://www.nvidia.com/
Licenses : custom
Groups : None
Provides : None
Depends On : kernel26>=2.6.28 kernel26<2.6.29 nvidia-utils
Optional Deps : None
Required By : None
Conflicts With : nvidia-96xx nvidia-71xx nvidia-legacy
Replaces : None
Installed Size : 7744,00 K
Packager : Pierre Schmitz <[email protected]>
Architecture : i686
Build Date : 2009-01-12T13:46:07 CET
Install Date : 2009-02-25T13:24:55 CET
Install Reason : Explicitly installed
Install Script : Yes
Description : NVIDIA drivers for kernel26.
Backup Files:
(none)

Similar Messages

  • Thunderbird hangs with "Copying to sent folder" after sending mail

    This is the same as has been reported by other users, however I have more info which I hope may be useful. (I haven't been able to receive my account confirmation email so created a new issue - separate problem!)
    The solutions which have been previously suggested (repair folders, compact folders and archive sent folder) do not cure this issue for me, which happens to me roughly 2-3 times every day. Restarting TB cures it for a short while.
    I've noticed that the problem almost always happens if I have a reminder that either is on screen or has recently popped up and been closed with a "1 hour reminder" (or other duration rather than dismissed).
    I generally mark an email which requires me to act with a "convert to task" and a reminder. Today, for example, I received an email asking me to join a conference call this afternoon at 4:30. So I used "convert to task" and asked to be reminded at 4:15. This will almost certainly cause TB to hang later this afternoon when I send an email while the reminder is on screen. Reminders often sit unnoticed behind other windows and this is generally the case when the hanging takes place.
    I'm using TB 31.1.1 on Ubuntu Gnome 14.04. I've only started having this problem in the last few months, at first every few days, but now several times a day.
    So I don't think size of Sent folder is the cause of this issue (it also sometimes hangs when saving to the Drafts folder too, which is usually empty) - I'm convinced it's something to do with a problem caused by reminder notifications being on screen or pending. The fact that restarting TB allows emails to be stored correctly in the Sent folder without a problem (for a while!) means that size or corruption are not the likely causes.
    Hope this helps others out there to pin this one down, even if I can't offer a solution - and any more info will be useful!

    Today this has happened four times, so I've now decided I'll have to switch to a different email client. For now, I'll use Evolution but continue to watch this thread to see if a cure is offered.
    Sorry to leave, as I like the product, but I can no longer work effectively when I have no confidence that my emails have been sent, and are not recorded in the Sent folder.

  • ARD Administrator hangs with "Spinning Wheel of Death" after Apple Updates

    Help! I added the required eight Apple Updates today (11/23/09) and Apple Remote Desktop (ARD) Administrator stopped working. The installed updates are iTunes, 9.0.3, Remote Desktop Client Update 3.3.1, Java for Mac OS X 10.5 Update 5 1.0, Security Update 2009-006 1.0, Bluetooth Firmware Update 2.0.1, Safari 4.0.4, Performance Update 1.0, and iMovie Update 8.0.5.
    Since these updates, the ARD Administrator hangs up (spinning wheel) when trying to activate it. I receive the error message:
    The Remote Desktop Administrator software failed to start due to an unexpected error. The Remote Desktop software may not be installed correctly, or the computer may require a restart. [Quit]
    I have tried restarts, poweroffs, etc., but the ARD Administrator stills hangs. What can I do to reverse the last ARD update?

    Without java, Safari is just as fast as Firefox. And if you do for some reason need java, you can use Firefox instead (as I had to, to log into the Apple Discussions" page.
    Safari is faster than Firefox. There are very few sites that need use Java, so unless you know a site uses it, it should always be disabled. And for clarification, no part of the Apple web site uses Java, so there's no reason to have it activated.

  • Photoshop cc opens with large fonts on screen, after reinstalation

    running windows 7, after the first installation which was fine, my laptop restarted and when I opened the program, everything is extra large on  my display, don't know hoe to get it fix, i have reinstalled the program already, same behavior. please help.

    Please Update CC App from following link:
    http://www.adobe.com/appsmanager/index.html and then try signing in.
    Do let us know if it works for you.
    Regards
    Pragya

  • Satellite L500 - System hanging on startup screen after Windows update

    Hi,
    I'm hoping someone can help. My Satellite L500 is hanging on the blue startup screen after it restarted after a windows update, the mouse arrow is moving, and there seems to be some hard drive activity with some flickering in the system indicator lights. Other than that, nothing? Any ideas?
    Thanks,
    Denise

    It was stuck on the Windows 7 welcome screen, all I had to do was hold the power button down for longer and restart it properly. I was just concerned as they always say not to turn the computer off during an update.
    *All good now* thanks anyway :)

  • [Solved] Black Screen after Xorg configure.

    Hello all Archlinux users;)
    Yesterday i reinstall my system (Archlinux x86_64).
    Install was succesful (it's always succesful).
    Problems started after install ,I istalled Xorg a Nvidia Drivers (GF 8600GT).
    I got conflicts nvidia-utils with xorg.utils 7-4-1 and it's remowe something gl libary.
    And ,i like always install hwd.
    I configure xorg with hwd -xa.
    I start X with (X -config /etc/X11/xorg.conf)
    And after that i started that i got black screen (Monitor have signal).
    I try nvidia drivers too ,but it's like with the Vesa (Black Screen).
    And my questions is:
    What Should i do to run Xorg?
    I run before Arch with similiar config and it's works.
    I can't get here X.org log or xorg.conf but they don't have any erorrs (in log i have something about hal and dievice , but on wiki i read that xorg 1.6 blocked hotplug dievices).
    Sorry for my English:|
    Thanks for help.
    I found similiar problem in this topic:
    http://bbs.archlinux.org/viewtopic.php?id=71158 .
    Last edited by SpeedVin (2009-05-01 06:11:36)

    Hello Again
    I started X.
    And my tip for all Arch user is to install only xorg not xserver-xorg xorg-utils just xorg to have .xinit/startx script.
    But it's not over I started X but the mause and keyboard are not responding (they are dead).
    Before when i got this I just try hwd -xa and this solved my problem.
    Now i use xorg.conf generated by hwd -xa and it's happening (mouse and keyboard are not responding).
    I got "AllowMouseOpenFail" "true"
    "AutoAddDivices" "False"
    In Server Flags but this doesn't solved my problem.
    Please help

  • [SOLVED]Xorg crash with some applications when using double screen

    Hi,
    I have a TV that I often use to watch dvd from my computer, and to do that I've set it up as a second screen in my xorg.conf, but on a daily basis I use a xorg.conf file with only my main screen. Up until last week I was able to use my second screen without problem, but yesterday I tried and it crashed instantly.
    So I ran a few tests, amsn and vlc seems to be 2 applications that makes X crash (though there might be other, but I seem to be able to use chromium firefox and ktorrent just fine).
    My WM is not to blame, I've launched X without any WM and vlc still makes X crash.
    The problem does not happen when using a single screen.
    I thought that my xorg.conf might be the problem, so I used nvidia-settings to create a new one, but that didn't change anything.
    Here are my xorg.conf used for dual screen, and the logfile from the Xorg crash:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder62) Wed May 27 01:58:49 PDT 2009
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "1"
    EndSection
    Section "Files"
    EndSection
    Section "ServerFlags"
    Option "Xinerama" "1"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputClass"
    Identifier "Keyboard Defaults"
    MatchIsKeyboard "yes"
    Option "XkbLayout" "fr"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Lite-On e1770NSL/T"
    HorizSync 30.0 - 70.0
    VertRefresh 50.0 - 160.0
    Option "DPMS"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Unknown"
    ModelName "CRT-1"
    HorizSync 31.5 - 64.0
    VertRefresh 56.0 - 75.0
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 8800 GT"
    BusID "PCI:1:0:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "Device1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 8800 GT"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "CRT-0"
    Option "metamodes" "CRT-0: 1280x1024 +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Device1"
    Monitor "Monitor1"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "metamodes" "CRT-1: 1360x768 +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    [ 12049.854]
    X.Org X Server 1.9.0
    Release Date: 2010-08-20
    [ 12049.855] X Protocol Version 11, Revision 0
    [ 12049.855] Build Operating System: Linux 2.6.34-ARCH x86_64
    [ 12049.855] Current Operating System: Linux Arch 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 08:45:18 CEST 2010 x86_64
    [ 12049.855] Kernel command line: root=/dev/disk/by-uuid/132b76f3-06e9-4838-944f-43ac4deccebb ro
    [ 12049.855] Build Date: 24 August 2010 01:44:37PM
    [ 12049.855]
    [ 12049.855] Current version of pixman: 0.18.4
    [ 12049.856] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 12049.856] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 12049.856] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 5 17:25:50 2010
    [ 12049.857] (==) Using config file: "/etc/X11/xorg.conf"
    [ 12049.857] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 12049.857] (==) ServerLayout "Layout0"
    [ 12049.857] (**) |-->Screen "Screen0" (0)
    [ 12049.857] (**) | |-->Monitor "Monitor0"
    [ 12049.857] (**) | |-->Device "Device0"
    [ 12049.857] (**) |-->Screen "Screen1" (1)
    [ 12049.857] (**) | |-->Monitor "Monitor1"
    [ 12049.857] (**) | |-->Device "Device1"
    [ 12049.857] (**) |-->Input Device "Keyboard0"
    [ 12049.857] (**) |-->Input Device "Mouse0"
    [ 12049.857] (**) Option "Xinerama" "1"
    [ 12049.857] (==) Automatically adding devices
    [ 12049.857] (==) Automatically enabling devices
    [ 12049.857] (**) Xinerama: enabled
    [ 12049.857] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 12049.857] Entry deleted from font path.
    [ 12049.857] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 12049.857] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 12049.857] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 12049.857] (WW) Disabling Keyboard0
    [ 12049.857] (WW) Disabling Mouse0
    [ 12049.857] (II) Loader magic: 0x7d4880
    [ 12049.857] (II) Module ABI versions:
    [ 12049.857] X.Org ANSI C Emulation: 0.4
    [ 12049.857] X.Org Video Driver: 8.0
    [ 12049.857] X.Org XInput driver : 11.0
    [ 12049.857] X.Org Server Extension : 4.0
    [ 12049.858] (--) PCI:*(0:1:0:0) 10de:0611:1462:1170 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
    [ 12049.858] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 12049.858] (II) LoadModule: "extmod"
    [ 12049.858] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 12049.858] (II) Module extmod: vendor="X.Org Foundation"
    [ 12049.858] compiled for 1.9.0, module version = 1.0.0
    [ 12049.858] Module class: X.Org Server Extension
    [ 12049.858] ABI class: X.Org Server Extension, version 4.0
    [ 12049.858] (II) Loading extension MIT-SCREEN-SAVER
    [ 12049.858] (II) Loading extension XFree86-VidModeExtension
    [ 12049.858] (II) Loading extension XFree86-DGA
    [ 12049.858] (II) Loading extension DPMS
    [ 12049.858] (II) Loading extension XVideo
    [ 12049.858] (II) Loading extension XVideo-MotionCompensation
    [ 12049.858] (II) Loading extension X-Resource
    [ 12049.858] (II) LoadModule: "dbe"
    [ 12049.859] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 12049.859] (II) Module dbe: vendor="X.Org Foundation"
    [ 12049.859] compiled for 1.9.0, module version = 1.0.0
    [ 12049.859] Module class: X.Org Server Extension
    [ 12049.859] ABI class: X.Org Server Extension, version 4.0
    [ 12049.859] (II) Loading extension DOUBLE-BUFFER
    [ 12049.859] (II) LoadModule: "glx"
    [ 12049.859] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 12049.866] (II) Module glx: vendor="NVIDIA Corporation"
    [ 12049.867] compiled for 4.0.2, module version = 1.0.0
    [ 12049.867] Module class: X.Org Server Extension
    [ 12049.867] (II) NVIDIA GLX Module 256.53 Fri Aug 27 20:50:26 PDT 2010
    [ 12049.867] (II) Loading extension GLX
    [ 12049.867] (II) LoadModule: "record"
    [ 12049.867] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 12049.867] (II) Module record: vendor="X.Org Foundation"
    [ 12049.867] compiled for 1.9.0, module version = 1.13.0
    [ 12049.867] Module class: X.Org Server Extension
    [ 12049.867] ABI class: X.Org Server Extension, version 4.0
    [ 12049.867] (II) Loading extension RECORD
    [ 12049.867] (II) LoadModule: "dri"
    [ 12049.867] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 12049.867] (II) Module dri: vendor="X.Org Foundation"
    [ 12049.867] compiled for 1.9.0, module version = 1.0.0
    [ 12049.867] ABI class: X.Org Server Extension, version 4.0
    [ 12049.867] (II) Loading extension XFree86-DRI
    [ 12049.867] (II) LoadModule: "dri2"
    [ 12049.867] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 12049.867] (II) Module dri2: vendor="X.Org Foundation"
    [ 12049.867] compiled for 1.9.0, module version = 1.2.0
    [ 12049.867] ABI class: X.Org Server Extension, version 4.0
    [ 12049.867] (II) Loading extension DRI2
    [ 12049.867] (II) LoadModule: "nvidia"
    [ 12049.867] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 12049.868] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 12049.868] compiled for 4.0.2, module version = 1.0.0
    [ 12049.868] Module class: X.Org Video Driver
    [ 12049.868] (II) NVIDIA dlloader X Driver 256.53 Fri Aug 27 20:29:45 PDT 2010
    [ 12049.868] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 12049.868] (--) using VT number 7
    [ 12049.869] (II) Loading sub module "fb"
    [ 12049.869] (II) LoadModule: "fb"
    [ 12049.869] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 12049.870] (II) Module fb: vendor="X.Org Foundation"
    [ 12049.870] compiled for 1.9.0, module version = 1.0.0
    [ 12049.870] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 12049.870] (II) Loading sub module "wfb"
    [ 12049.870] (II) LoadModule: "wfb"
    [ 12049.870] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 12049.870] (II) Module wfb: vendor="X.Org Foundation"
    [ 12049.870] compiled for 1.9.0, module version = 1.0.0
    [ 12049.870] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 12049.870] (II) Loading sub module "ramdac"
    [ 12049.870] (II) LoadModule: "ramdac"
    [ 12049.870] (II) Module "ramdac" already built-in
    [ 12049.870] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 12049.870] (==) NVIDIA(0): RGB weight 888
    [ 12049.870] (==) NVIDIA(0): Default visual is TrueColor
    [ 12049.870] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 12049.870] (**) NVIDIA(0): Option "TwinView" "0"
    [ 12049.870] (**) NVIDIA(0): Option "MetaModes" "CRT-0: 1280x1024 +0+0"
    [ 12049.870] (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
    [ 12049.870] (**) NVIDIA(0): Enabling RENDER acceleration
    [ 12049.870] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    [ 12049.870] (II) NVIDIA(0): enabled.
    [ 12049.955] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
    [ 12049.957] (II) NVIDIA(0): NVIDIA GPU GeForce 8800 GT (G92) at PCI:1:0:0 (GPU-0)
    [ 12049.957] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 12049.957] (--) NVIDIA(0): VideoBIOS: 62.92.23.00.00
    [ 12049.957] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 12049.957] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 12049.957] (--) NVIDIA(0): Connected display device(s) on GeForce 8800 GT at PCI:1:0:0:
    [ 12049.957] (--) NVIDIA(0): Lite-On e1770NSL/T (CRT-0)
    [ 12049.957] (--) NVIDIA(0): CRT-1
    [ 12049.957] (--) NVIDIA(0): Lite-On e1770NSL/T (CRT-0): 400.0 MHz maximum pixel clock
    [ 12049.957] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
    [ 12049.960] (II) NVIDIA(0): Display Device found referenced in MetaMode: CRT-0
    [ 12049.967] (II) NVIDIA(0): Assigned Display Device: CRT-0
    [ 12049.967] (II) NVIDIA(0): Validated modes:
    [ 12049.967] (II) NVIDIA(0): "CRT-0:1280x1024+0+0"
    [ 12049.967] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
    [ 12049.999] (--) NVIDIA(0): DPI set to (101, 108); computed from "UseEdidDpi" X config
    [ 12049.999] (--) NVIDIA(0): option
    [ 12049.999] (WW) NVIDIA(0): 32-bit ARGB GLX visuals are not currently supported with the
    [ 12049.999] (WW) NVIDIA(0): Xinerama extension.
    [ 12049.999] (WW) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
    [ 12049.999] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
    [ 12049.999] (==) NVIDIA(1): RGB weight 888
    [ 12049.999] (==) NVIDIA(1): Default visual is TrueColor
    [ 12049.999] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
    [ 12049.999] (**) NVIDIA(1): Option "TwinView" "0"
    [ 12049.999] (**) NVIDIA(1): Option "MetaModes" "CRT-1: 1360x768 +0+0"
    [ 12049.999] (**) NVIDIA(1): Enabling RENDER acceleration
    [ 12049.999] (II) NVIDIA(1): NVIDIA GPU GeForce 8800 GT (G92) at PCI:1:0:0 (GPU-0)
    [ 12049.999] (--) NVIDIA(1): Memory: 524288 kBytes
    [ 12049.999] (--) NVIDIA(1): VideoBIOS: 62.92.23.00.00
    [ 12049.999] (II) NVIDIA(1): Detected PCI Express Link width: 16X
    [ 12049.999] (--) NVIDIA(1): Interlaced video modes are supported on this GPU
    [ 12049.999] (--) NVIDIA(1): Connected display device(s) on GeForce 8800 GT at PCI:1:0:0:
    [ 12049.999] (--) NVIDIA(1): Lite-On e1770NSL/T (CRT-0)
    [ 12049.999] (--) NVIDIA(1): CRT-1
    [ 12049.999] (--) NVIDIA(1): Lite-On e1770NSL/T (CRT-0): 400.0 MHz maximum pixel clock
    [ 12049.999] (--) NVIDIA(1): CRT-1: 400.0 MHz maximum pixel clock
    [ 12050.002] (II) NVIDIA(1): Display Device found referenced in MetaMode: CRT-1
    [ 12050.006] (II) NVIDIA(1): Assigned Display Device: CRT-1
    [ 12050.006] (WW) NVIDIA(1): No valid modes for "CRT-1:1360x768+0+0"; removing.
    [ 12050.006] (WW) NVIDIA(1):
    [ 12050.006] (WW) NVIDIA(1): Unable to validate any modes; falling back to the default mode
    [ 12050.006] (WW) NVIDIA(1): "nvidia-auto-select".
    [ 12050.006] (WW) NVIDIA(1):
    [ 12050.006] (II) NVIDIA(1): Validated modes:
    [ 12050.006] (II) NVIDIA(1): "nvidia-auto-select"
    [ 12050.006] (II) NVIDIA(1): Virtual screen size determined to be 1024 x 768
    [ 12050.009] (WW) NVIDIA(1): Unable to get display device CRT-1's EDID; cannot compute DPI
    [ 12050.009] (WW) NVIDIA(1): from CRT-1's EDID.
    [ 12050.009] (==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
    [ 12050.009] (WW) NVIDIA(1): 32-bit ARGB GLX visuals are not currently supported with the
    [ 12050.009] (WW) NVIDIA(1): Xinerama extension.
    [ 12050.009] (WW) NVIDIA(1): Disabling 32-bit ARGB GLX visuals.
    [ 12050.009] (--) Depth 24 pixmap format is 32 bpp
    [ 12050.009] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 12050.010] (II) NVIDIA(0): Initialized GPU GART.
    [ 12050.014] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 12050.014] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 12050.014] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 12050.014] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 12050.014] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 12050.014] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 12050.014] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 12050.014] (II) NVIDIA(0): Config Options in the README.
    [ 12050.017] (II) NVIDIA(0): Setting mode "CRT-0:1280x1024+0+0"
    [ 12050.049] (II) Loading extension NV-GLX
    [ 12050.064] (II) NVIDIA(0): Initialized OpenGL Acceleration
    [ 12050.071] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 12050.071] (II) NVIDIA(0): Initialized X Rendering Acceleration
    [ 12050.071] (==) NVIDIA(0): Backing store disabled
    [ 12050.071] (==) NVIDIA(0): Silken mouse enabled
    [ 12050.085] (**) NVIDIA(0): DPMS enabled
    [ 12050.085] (II) Loading extension NV-CONTROL
    [ 12050.085] (II) Loading sub module "dri2"
    [ 12050.085] (II) LoadModule: "dri2"
    [ 12050.085] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 12050.085] (II) NVIDIA(0): [DRI2] Setup complete
    [ 12050.085] (==) RandR enabled
    [ 12050.086] (II) NVIDIA(1): Initialized GPU GART.
    [ 12050.090] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 12050.090] (II) NVIDIA(1): may not be running or the "AcpidSocketPath" X
    [ 12050.090] (II) NVIDIA(1): configuration option may not be set correctly. When the
    [ 12050.090] (II) NVIDIA(1): ACPI event daemon is available, the NVIDIA X driver will
    [ 12050.090] (II) NVIDIA(1): try to use it to receive ACPI event notifications. For
    [ 12050.090] (II) NVIDIA(1): details, please see the "ConnectToAcpid" and
    [ 12050.090] (II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 12050.090] (II) NVIDIA(1): Config Options in the README.
    [ 12050.090] (II) NVIDIA(1): Setting mode "nvidia-auto-select"
    [ 12050.145] (II) NVIDIA(1): Initialized OpenGL Acceleration
    [ 12050.149] (==) NVIDIA(1): Disabling shared memory pixmaps
    [ 12050.149] (II) NVIDIA(1): Initialized X Rendering Acceleration
    [ 12050.149] (==) NVIDIA(1): Backing store disabled
    [ 12050.149] (==) NVIDIA(1): Silken mouse enabled
    [ 12050.157] (==) NVIDIA(1): DPMS enabled
    [ 12050.158] (II) Loading sub module "dri2"
    [ 12050.158] (II) LoadModule: "dri2"
    [ 12050.158] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 12050.158] (II) NVIDIA(1): [DRI2] Setup complete
    [ 12050.158] (==) RandR enabled
    [ 12050.158] (II) Initializing built-in extension Generic Event Extension
    [ 12050.158] (II) Initializing built-in extension SHAPE
    [ 12050.158] (II) Initializing built-in extension MIT-SHM
    [ 12050.158] (II) Initializing built-in extension XInputExtension
    [ 12050.158] (II) Initializing built-in extension XTEST
    [ 12050.158] (II) Initializing built-in extension BIG-REQUESTS
    [ 12050.158] (II) Initializing built-in extension SYNC
    [ 12050.158] (II) Initializing built-in extension XKEYBOARD
    [ 12050.158] (II) Initializing built-in extension XC-MISC
    [ 12050.158] (II) Initializing built-in extension SECURITY
    [ 12050.158] (II) Initializing built-in extension XINERAMA
    [ 12050.158] (II) Initializing built-in extension XFIXES
    [ 12050.158] (II) Initializing built-in extension RENDER
    [ 12050.158] (II) Initializing built-in extension RANDR
    [ 12050.158] (II) Initializing built-in extension COMPOSITE
    [ 12050.158] (II) Initializing built-in extension DAMAGE
    [ 12050.160] (II) Initializing extension GLX
    [ 12050.367] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 12050.367] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 12050.367] (II) LoadModule: "evdev"
    [ 12050.367] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 12050.367] (II) Module evdev: vendor="X.Org Foundation"
    [ 12050.367] compiled for 1.9.0, module version = 2.5.0
    [ 12050.367] Module class: X.Org XInput Driver
    [ 12050.367] ABI class: X.Org XInput driver, version 11.0
    [ 12050.367] (**) Power Button: always reports core events
    [ 12050.367] (**) Power Button: Device: "/dev/input/event3"
    [ 12050.375] (--) Power Button: Found keys
    [ 12050.375] (II) Power Button: Configuring as keyboard
    [ 12050.376] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 12050.376] (**) Option "xkb_rules" "evdev"
    [ 12050.376] (**) Option "xkb_model" "evdev"
    [ 12050.376] (**) Option "xkb_layout" "us"
    [ 12050.399] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 12050.399] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 12050.399] (**) Power Button: always reports core events
    [ 12050.399] (**) Power Button: Device: "/dev/input/event2"
    [ 12050.415] (--) Power Button: Found keys
    [ 12050.415] (II) Power Button: Configuring as keyboard
    [ 12050.415] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 12050.415] (**) Option "xkb_rules" "evdev"
    [ 12050.415] (**) Option "xkb_model" "evdev"
    [ 12050.415] (**) Option "xkb_layout" "us"
    [ 12050.416] (II) config/udev: Adding input device UVC Camera (046d:0802) (/dev/input/event4)
    [ 12050.416] (**) UVC Camera (046d:0802): Applying InputClass "evdev keyboard catchall"
    [ 12050.416] (**) UVC Camera (046d:0802): always reports core events
    [ 12050.416] (**) UVC Camera (046d:0802): Device: "/dev/input/event4"
    [ 12050.428] (--) UVC Camera (046d:0802): Found keys
    [ 12050.428] (II) UVC Camera (046d:0802): Configuring as keyboard
    [ 12050.428] (II) XINPUT: Adding extended input device "UVC Camera (046d:0802)" (type: KEYBOARD)
    [ 12050.428] (**) Option "xkb_rules" "evdev"
    [ 12050.428] (**) Option "xkb_model" "evdev"
    [ 12050.428] (**) Option "xkb_layout" "us"
    [ 12050.430] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event5)
    [ 12050.431] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
    [ 12050.431] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
    [ 12050.431] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event5"
    [ 12050.442] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
    [ 12050.442] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
    [ 12050.442] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found relative axes
    [ 12050.442] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
    [ 12050.442] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
    [ 12050.442] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
    [ 12050.442] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 12050.442] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE)
    [ 12050.442] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
    [ 12050.442] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
    [ 12050.442] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
    [ 12050.442] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
    [ 12050.442] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
    [ 12050.442] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
    [ 12050.442] (II) No input driver/identifier specified (ignoring)
    [ 12050.444] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 12050.444] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 12050.444] (**) AT Translated Set 2 keyboard: always reports core events
    [ 12050.444] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 12050.458] (--) AT Translated Set 2 keyboard: Found keys
    [ 12050.458] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 12050.458] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 12050.458] (**) Option "xkb_rules" "evdev"
    [ 12050.458] (**) Option "xkb_model" "evdev"
    [ 12050.458] (**) Option "xkb_layout" "us"
    [ 12050.459] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
    [ 12050.459] (II) No input driver/identifier specified (ignoring)
    [ 12057.008]
    Backtrace:
    [ 12057.008] 0: X (xorg_backtrace+0x28) [0x49f558]
    [ 12057.008] 1: X (0x400000+0x67939) [0x467939]
    [ 12057.008] 2: /lib/libpthread.so.0 (0x7f6c851f4000+0xf1c0) [0x7f6c852031c0]
    [ 12057.008] 3: X (0x400000+0x130355) [0x530355]
    [ 12057.008] 4: X (0x400000+0x2a2e1) [0x42a2e1]
    [ 12057.008] 5: X (0x400000+0x2123e) [0x42123e]
    [ 12057.008] 6: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f6c84187c4d]
    [ 12057.008] 7: X (0x400000+0x20de9) [0x420de9]
    [ 12057.008] Segmentation fault at address 0x4
    [ 12057.008]
    Fatal server error:
    [ 12057.008] Caught signal 11 (Segmentation fault). Server aborting
    [ 12057.008]
    [ 12057.008]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 12057.008] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 12057.008]
    [ 12057.019] (II) Power Button: Close
    [ 12057.019] (II) UnloadModule: "evdev"
    [ 12057.032] (II) Power Button: Close
    [ 12057.032] (II) UnloadModule: "evdev"
    [ 12057.045] (II) UVC Camera (046d:0802): Close
    [ 12057.045] (II) UnloadModule: "evdev"
    [ 12057.069] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Close
    [ 12057.069] (II) UnloadModule: "evdev"
    [ 12057.082] (II) AT Translated Set 2 keyboard: Close
    [ 12057.082] (II) UnloadModule: "evdev"
    Last edited by Azriel (2010-10-06 15:09:27)

    Sorry this doesn't really help with the Xinerama problem, but since you are using the nvidia driver, have you considered using Twinview instead? You could do composite stuff too with Twinview - last I knew, Xinerama had problems with things that want to use compositing. I don't know how your setup is but if you're not set on using Xinerama, it might be an option to consider.

  • T400 hangs with a green screen

    Hi,
    I have T400 with windows XP professional OS.
    Everything works fine but once in a while the system hangs with a greeen screen(vertical lines). There after nothing works. The only way out is to restart the system and then again everything works fine.
    Can you please help me resolve the issue.
    Let me know if you all need more information for the same.

    Okay, does this machine work on external LCD?
    So several repeated reboot sometimes get a working machine?
    Can you get into the BIOS menu when the laptop works on odd occasions? If so, go into your bios menu, go into your 'Config' menu.
    Under the display there should be option to switch between switchable, discrete or integrated. Choose integrated graphics option. Then press F10 save and exit, see whether that resolves your green screen issue.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • GTX670 - Signal lost/black screen after windows loading icon

    Hello,
    I hope I am posting this in the correct forum area.  If not I do apologize.
    Here are my specs:
    Board: MSI Z97-G45 Gaming
    Bios: ?? whatever pre-installed on mobo
    VGA:   MSI GTX670 OC
    PSU:   Corsair HX750 750W
    Intel Core i7-4790K
    MEM: 12 GB Kingston HyperX DDR3 1600 2x 4GB, 2x 2GB sticks
    HDD: SSD Kingston 120 GB (Win7), HDD 1 TB WD 7200 RPM (Win7), HDD 1.5 TB WD 7200 RPM (storage)
    COOLER: Corsair Hydro Series H60 Water Cooler
    OC: no overclocking done by me..default settings
    OS: Windows 7 64bit Professional
    So to keep this as direct and as short as humanly possible here is my situation.
    Had a gtx670 card that I had to send back to MSI under RMA.  They sent me what looks like a new gtx670 card (no dust) that I received yesterday (4 Aug).  Last night I removed temporary old card (9800gt) and plugged in new 670gtx.  Things seemed to be ok, reinstalled driver after card was recognized.  Played one round of Battlefield 4 for testing purposes and all seemed good.
    Upon exiting the game things went south in a hurry.  Moving the mouse cursor around was extremely slow and choppy.  Mouse clicks were not recognized.  I could not bring up ctrl-alt-del to get to task manager.  At this point the cursor turned to spinning circle as if things were happening.  However, after 5+ minutes of nothing changing I did a hard boot.
    Restarted and after the windows loading screen the signal appeared to be lost to the monitor and I was left with black screen.  This was with the SSD.  I then attempted to load into the HDD windows OS that I hadn't logged into yet with this card and was greeted with the same issue.
    I can load into Safe Mode with no issues.  In safe mode I removed all nvidia drivers and was then able to load into windows normally using basic windows vga drivers.  The moment I load the Nvidia drivers and restart the computer I then have the issue again.  This happens with both drives.
    I have reset the video card in the PCI-Ex16 slot and still received the problem.  I have tried a different PCI-Ex16 slot and still had the issue.  I put the old 9800gt card back in and windows loaded perfectly and without issues on both drives.  I put the 670gt in and try to load into normal windows and I lose signal and get black screen after the windows loading screen.
    I'm at a loss at the moment.  I think it's the drivers, but could it be the card?
    Doing some research I've come across some people saying there may be issues with the nvidia HD audio drivers that are installed with the video drivers.  Could it be as simple as uninstalling or unchecking that particular driver?

    Flashed the BIOS last night to the latest version and attempted to launch windows with the GTX670 card.  I still experienced the same issue where as soon as windows finishes it's loading animation (with Nvidia drivers) and it goes to the login screen, the monitors cut out.
    At this point I feel like it has to be the card.  The moment I install the video drivers and restart, I have the problem of losing the signal/black screen.
    What I have done:
    1) Completely wiped any/all video related drivers from the computer and started from scratch. No success.
    2) Ran Memtestx86 to see if it's a problem with my memory sticks. No problems found.
    3) Put the card in a different PCI-Ex16 slot to see if there was a problem with the slot. No success.
    4) Flash updated the BIOS on the motherboard to the latest version. No success.
    I have a dual boot computer with Windows 7 64-bit installed on an SSD and a HDD.  The problem happens on both drives.  Yet, the moment I install my old 9800GT the problem disappears and I can login to Windows just fine.
    I will be sending the card back today on another RMA.

  • Gray screen after boot and blue screen with stripes

    Hi, I have a MacBook Pro Mid 2011 with Mavericks (came with Snow Leopard).
    History:
    One day i was working and things were too slow. I tried to restart but it was taking too long to close all the programs. So I forced shut down by holding the power button. When I turned it on again, my problems begin.
    Problem:
    The Apple logo and the spinning wheel appear. After a while, both disappear and it freezes at gray screen. Some solutions I tried make the screen goes blue with black vertical stripes. In both cases, I have to force shut down.
    Solutions I tried:
    - Reset NVRAM
         It does reset, but nothing change
    - Log in my Windows partition. I can't log
    - Hold option key and choose recovery. Blue screen
    - Recovery system by restart and press Command-R. Blue Screen.
    - Safe boot by pressing Shift. Blue Screen
    - Verbose by pressing Command-V. Restart and gray screen again.
    - Single-user mode by pressing Command-S
         Tried to reapair hard drive:
              /sbin/fsck –fy
         Returns the message "** The volume Macintosh HD appears to be OK.". I restart and nothing change.
         Tried to change startup permissions:
              mount -uw /
              chown root /
              chmod 1775 /
              exit
         Restart and nothing change.
    - Boot from a bootable USB flash drive
         Holding option key, I choose my flash drive with Ubuntu installed. It gives me 3 options: Use Ubuntu without installing, Install Ubuntu, Repair Disk      Errors (something like that). The 3 options go to the blue screen
         Flash drive with Mavericks. Blue screen.
    -Boot from my Snow Leopard CD. Gray screen, restarting, gray screen.
    I don't what else I can do. Is it a hardware problem? At first I thought it was some corrupted file. But is it a GPU or logic board problem? What else can I try?

    I found this to work at least to get in and backup some files. It is VERY important to put these commands in EXACTLY as seen here, including spaces.
    Boot into Single-User mode (Command-S while booting up)
    Execute the following commands:
    /sbin/fsck -fy /
    /sbin/mount -uw /
    mkdir /Disabled_System_Library_Extensions
    cd /Disabled_System_Library_Extensions
    mv /System/Library/Extensions/ATI* .
    mv /System/Library/Extensions/AMD* .
    touch /System/Library/Extensions
    exit
    I guess these two graphics extensions go bad quite often on Macbook Pro 15-inch.  They are part of the logic board. The only problem I had was I still couldn't get into my computer any other way, and the graphics for Safari were messed up.  Firefox was okay.  Good Luck!
    Here's the original thread:
    http://apple.stackexchange.com/questions/120507/boot-hangs-on-grey-screen-even-w hen-booting-from-usb-drive-with-fresh-os-x-inst

  • MBA hangs on login screen after mountain lion upgrade

    I have a mid 2011 macbook air. Ever since I did the upgrade to mountain lion last week, I have had about 10 instances where it hangs on the login screen. I bring it up from sleep, I see the login but when I enter my password and hit enter, it just hangs with the login box grayed. I can hit the cancel button and it gives me the ability to interact with the login box again, but will not log in. on all but one of these instances I have had to restart the machine. I have timed it to 5 minutes twice before restarting the machine to get back in. This never happened with lion. Anyone else have this issue?

    I have issues also.
    With a samba share on Linux, ML can see it correctly, but on my Windows Home Server 2011, if i do smb://"server address" i receive and error saying that the share dows not exist on server. Before on Lion i had a list of my shares. On finder the Server apears with a "/" which i can not open.
    If i do smb://"server address/share" is works correctly, but i would like to have tha before behaviour. Besides this the only issue that i found after upgrading is the WHS 2011 Lauchpad could not sign in (before in Lion was working).
    Any ideas on how to solve this?

  • T400 system hangs at POST screen after updating BIOS 7UET82WW

    I have 3 GB memory and Win-7 Ultimate 32 bit OS installed in my T400 system. Recently I had updated the latest BIOS 7UET82WW thru TVSU and ended up with a serious problem.The BIOS update itself was succesfull, but right after reboot my problems started.
    1. The system hangs during startup in POST screen and sometimes boots into OS after a long wait  (20-30 mins)
    2. When I try to press F2 to enter the BIOS, i get a long beep for about 10 seconds and screen becomes white
    3. White screen garbage disappears in few seconds and blinking cursor stays for long time (around 20 -30 mins)
    In net, I have to wait for around 30 mins for the system to boot into OS everytime. If I interupt in between by pressing any key, long beep and white screen garbage appears. I am not able to enter the BIOS as well.
    After logon to the OS, everything seems to be absolutely perfect. But the problem comes back after reboot or hibernate and resume the system.
    Appreciate any solution or feddback from anyone.

    My T500 did this as well after the update.  I went into the bios and loaded all the defaults, rebooted.  Went back into the bios and reset my options (discrete only, turn off some unused features) and the system is working normally and Vista is booting as quickly as it had been before the update (and actually can accomplish a reboot).
    arun_ilango wrote:
    I have 3 GB memory and Win-7 Ultimate 32 bit OS installed in my T400 system. Recently I had updated the latest BIOS 7UET82WW thru TVSU and ended up with a serious problem.The BIOS update itself was succesfull, but right after reboot my problems started.
    1. The system hangs during startup in POST screen and sometimes boots into OS after a long wait  (20-30 mins)
    2. When I try to press F2 to enter the BIOS, i get a long beep for about 10 seconds and screen becomes white
    3. White screen garbage disappears in few seconds and blinking cursor stays for long time (around 20 -30 mins)
    In net, I have to wait for around 30 mins for the system to boot into OS everytime. If I interupt in between by pressing any key, long beep and white screen garbage appears. I am not able to enter the BIOS as well.
    After logon to the OS, everything seems to be absolutely perfect. But the problem comes back after reboot or hibernate and resume the system.
    Appreciate any solution or feddback from anyone.
    Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
    Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

  • System hangs at startup screen after 10.4.9

    Hello all,
    After installing OS 10.4.9, i restarted the computer and the computer keeps hanging at the blue startup screen.
    any recommendations for help? all i can do is to restart the computer and it goes back to the blue loading screen and hangs
    thanks for your help in advance

    Hi there ,
    1.Disconnect any external devices connected to your
    computer before you restart.
    ok i did
    2.Try booting the computer in safe mode by holding
    shift key>>
    i held on to the shift key. still the blue screen loads and hangs in there
    if it doesn't work then you can try
    repairing the permissions and verify the disk by
    following this
    article>>http://docs.info.apple.com/article.html?artnu
    m=106214
    i followed the instructions and repaired disk and permission. but still blue screen
    3.After repairing the disk by using FSCK command,
    i did it. and when i restart the computer, the blue screen sill remains
    it not works then the only option would be to try
    repairing with the disk or a re-install of operating
    system
    when i load the dvd that came with the ibook, nothing happens. i tried pressing 'c' or 's' or 'option' when the computer restarts. it doesnt work as well. nothing happens. the computer loads and freezes when the loading bar at the blue screen is fully loaded.
    =(

  • Why does my system hang on a blank software update screen after I shut down?

    Why does my system hang on a blank software update screen after I shut down the computer?
    This only happened after my computer attempted to download security update 2013-003 version 1.
    I have an iMac with a 2.16 GHz Intel Core 2 Duo running on OSX 10.7.5.
    I repaired all disk permission, and then verified and fixed the disk.
    My hardware diagnostics program gave all systems a green light.
    After all this, the system still hangs.
    This must be an operating system glitch.
    How do I fix it?
    If you tell me to reload the operating system, then I'll have to go retro with Snow Leopard.
    All subsequent updates were purchased from Apple on the Internet and downloaded.

    Cineast wrote:
    If you tell me to reload the operating system, then I'll have to go retro with Snow Leopard.
    All subsequent updates were purchased from Apple on the Internet and downloaded.
    Not so. You use the recovery mode to reinstall Lion. Details in Recovery and About OS X Recovery. Also, see Computers using Internet Recovery.

  • YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads.

    YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads, if it's even loading at all.
    I do not know if it's relevant or not, but I got a message on my ipad while on safari saying that my iPhone has a virus. I looked it up and it seems it might have just been an ad from the website I was on, but it happened around the same time YouTube stopped working.

    You will find that using the YouTube app will provide a better viewing experience for YouTube videos.

Maybe you are looking for