Xorg/Intel, issues. "Fatal Error: No Screens Found" [SOLVED]
I'm using an intel chipset with integrated graphics on an older computer, (old enough that I have to use kms) which worked previously, but didn't after the update. I've already enabled kms, so I ruled that out, if any of you can help, here are my logs:
Results of $- Xinit
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686
Current Operating System: Linux Sek-Gamma 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/82572740-394d-448c-8da4-b6d4ed904793 ro acpi=off
Build Date: 08 November 2009 04:12:47PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 16 02:09:03 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e5d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 3
(--) PCI:*(0:0:2:0) 8086:2562:109f:3189 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xf0000000/134217728, 0xe8000000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.4.901, module version = 2.10.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(EE) intel(0): No kernel modesetting driver detected.
(II) UnloadModule: "intel"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
With the vesa driver specified, it still gives me an error based on the extension "Record" in xorg.
Last edited by silversnakeeyes (2010-08-25 13:58:14)
Crap, it didn't work. I tried with the i915 thing on through grub, and is still failed.
The bug in xorg also said that there was a bug with the module 'record' so I removed it completely and tried again, for some reason it still didn't work. With vesa as the driver, I get a black screen, which is the closest to a GUI I've seen in weeks.
Error log - Vesa with 'Record' removed:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686
Current Operating System: Linux Sek-Gamma 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/82572740-394d-448c-8da4-b6d4ed904793 ro acpi=off i915.modeset=1
Build Date: 08 November 2009 04:12:47PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 16 23:20:03 2010
(++) Using config file: "/home/ssen/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e5d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 2
(--) PCI:*(0:0:2:0) 8086:2562:109f:3189 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xf0000000/134217728, 0xe8000000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 8000 kB
(II) VESA(0): VESA VBE OEM: Intel(r)845G/845GL/845GE/845GV Graphics Chip Accelerated VGA BIOS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
(II) VESA(0): VESA VBE OEM Product: Intel(r)845G/845GL/845GE/845GV Graphics Controller
(II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(==) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level none
(II) VESA(0): VESA VBE DDC transfer in appr. 0 sec.
(II) VESA(0): VESA VBE DDC read failed
(II) VESA(0): VESA VBE PanelID invalid
(II) VESA(0): Searching for matching VESA mode(s):
Mode: 13c (1920x1440)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1920
XResolution: 1920
YResolution: 1440
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 1
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1920
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 14d (1920x1440)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 3840
XResolution: 1920
YResolution: 1440
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 0
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 3840
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 15c (1920x1440)
ModeAttributes: 0x9a
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 7680
XResolution: 1920
YResolution: 1440
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 0
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 7680
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 13a (1600x1200)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1600
XResolution: 1600
YResolution: 1200
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 3
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1600
BnkNumberOfImagePages: 3
LinNumberOfImagePages: 3
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 14b (1600x1200)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 3200
XResolution: 1600
YResolution: 1200
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 1
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 3200
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
*Mode: 15a (1600x1200)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 6400
XResolution: 1600
YResolution: 1200
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 0
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 6400
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 107 (1280x1024)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1280
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 5
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1280
BnkNumberOfImagePages: 5
LinNumberOfImagePages: 5
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 11a (1280x1024)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 2560
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 2
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2560
BnkNumberOfImagePages: 2
LinNumberOfImagePages: 2
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
*Mode: 11b (1280x1024)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 5120
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 0
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 5120
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 105 (1024x768)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1024
XResolution: 1024
YResolution: 768
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 9
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1024
BnkNumberOfImagePages: 9
LinNumberOfImagePages: 9
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 117 (1024x768)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 2048
XResolution: 1024
YResolution: 768
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 4
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2048
BnkNumberOfImagePages: 4
LinNumberOfImagePages: 4
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
*Mode: 118 (1024x768)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 4096
XResolution: 1024
YResolution: 768
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 1
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 4096
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
*Mode: 112 (640x480)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 2560
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 5
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2560
BnkNumberOfImagePages: 5
LinNumberOfImagePages: 5
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 114 (800x600)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1600
XResolution: 800
YResolution: 600
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 7
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1600
BnkNumberOfImagePages: 7
LinNumberOfImagePages: 7
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
*Mode: 115 (800x600)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 3200
XResolution: 800
YResolution: 600
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 3
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 3200
BnkNumberOfImagePages: 3
LinNumberOfImagePages: 3
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 109 (132x25)
ModeAttributes: 0xf
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 594
XResolution: 132
YResolution: 25
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 4
NumberOfBanks: 1
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 10a (132x43)
ModeAttributes: 0xf
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 594
XResolution: 132
YResolution: 43
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 4
NumberOfBanks: 1
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 10b (132x50)
ModeAttributes: 0xf
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 594
XResolution: 132
YResolution: 50
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 4
NumberOfBanks: 1
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 10c (132x60)
ModeAttributes: 0xf
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 594
XResolution: 132
YResolution: 60
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 4
NumberOfBanks: 1
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 101 (640x480)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 640
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 24
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 640
BnkNumberOfImagePages: 24
LinNumberOfImagePages: 24
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 103 (800x600)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 800
XResolution: 800
YResolution: 600
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 16
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 800
BnkNumberOfImagePages: 16
LinNumberOfImagePages: 16
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 111 (640x480)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1280
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 12
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1280
BnkNumberOfImagePages: 12
LinNumberOfImagePages: 12
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
(II) VESA(0): Total Memory: 125 64KB banks (8000kB)
(II) VESA(0): Monitor0: Using default hsync range of 31.50-37.90 kHz
(II) VESA(0): Monitor0: Using default vrefresh range of 50.00-70.00 Hz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "1600x1200" (no mode of this name)
(II) VESA(0): Not using built-in mode "1280x1024" (no mode of this name)
(II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
(II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
(II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
(WW) VESA(0): No valid modes left. Trying less strict filter...
(II) VESA(0): Monitor0: Using hsync range of 31.50-37.90 kHz
(II) VESA(0): Monitor0: Using vrefresh range of 50.00-70.00 Hz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "1600x1200" (hsync out of range)
(II) VESA(0): Not using built-in mode "1280x1024" (hsync out of range)
(II) VESA(0): Not using built-in mode "1024x768" (hsync out of range)
(--) VESA(0): Virtual size is 800x600 (pitch 800)
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "640x480"
(==) VESA(0): DPI set to (96, 96)
(II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (115)
(II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 8000 kB
(II) VESA(0): VESA VBE OEM: Intel(r)845G/845GL/845GE/845GV Graphics Chip Accelerated VGA BIOS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
(II) VESA(0): VESA VBE OEM Product: Intel(r)845G/845GL/845GE/845GV Graphics Controller
(II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) VESA(0): virtual address = 0xb6883000,
physical address = 0xf0000000, size = 8192000
(II) VESA(0): Setting up VESA Mode 0x115 (800x600)
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(==) VESA(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Logitech USB Gaming Mouse
(**) Logitech USB Gaming Mouse: always reports core events
(**) Logitech USB Gaming Mouse: Device: "/dev/input/event3"
(II) Logitech USB Gaming Mouse: Found 20 mouse buttons
(II) Logitech USB Gaming Mouse: Found scroll wheel(s)
(II) Logitech USB Gaming Mouse: Found relative axes
(II) Logitech USB Gaming Mouse: Found x and y relative axes
(II) Logitech USB Gaming Mouse: Configuring as mouse
(**) Logitech USB Gaming Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE)
(**) Logitech USB Gaming Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB Gaming Mouse: (accel) acceleration profile 0
(II) Logitech USB Gaming Mouse: initialized for relative axes.
(II) Logitech USB Gaming Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
Similar Messages
-
Xorg: Fatal Error: No Screens Found
I have tried to install Arch around four times now and I cannot get Xorg to work. Nothing I do will make it work. I'm using all of the proper drivers and I followed the installation instructions word for word but I cannot get it to work. not even after countless hours of research. I cannot get GDM to work either. I'm lost.
Specs:
Grpahics: Nvidia GeForce GTX 770M (also have the intel built in graphics but I don't have a use for it)
Drivers: Nvidia 340xx
Screen: 1920x1080
Output from Xorg log:
[ 59.877]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 59.877] X Protocol Version 11, Revision 0
[ 59.877] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 59.877] Current Operating System: Linux Dalton-Arch 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 59.877] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
[ 59.877] Build Date: 29 December 2014 01:09:58PM
[ 59.877]
[ 59.877] Current version of pixman: 0.32.6
[ 59.877] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 59.877] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 59.877] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 4 08:09:50 2015
[ 59.877] (==) Using config file: "/etc/X11/xorg.conf"
[ 59.878] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 59.878] (==) ServerLayout "Layout0"
[ 59.878] (**) |-->Screen "Screen0" (0)
[ 59.878] (**) | |-->Monitor "Monitor0"
[ 59.878] (**) | |-->Device "Device0"
[ 59.878] (**) |-->Input Device "Keyboard0"
[ 59.878] (**) |-->Input Device "Mouse0"
[ 59.878] (==) Automatically adding devices
[ 59.878] (==) Automatically enabling devices
[ 59.878] (==) Automatically adding GPU devices
[ 59.878] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 59.878] Entry deleted from font path.
[ 59.878] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 59.878] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 59.878] Entry deleted from font path.
[ 59.878] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 59.878] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 59.878] Entry deleted from font path.
[ 59.878] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 59.878] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 59.878] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 59.878] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 59.878] (WW) Disabling Keyboard0
[ 59.878] (WW) Disabling Mouse0
[ 59.878] (II) Loader magic: 0x818d80
[ 59.878] (II) Module ABI versions:
[ 59.878] X.Org ANSI C Emulation: 0.4
[ 59.878] X.Org Video Driver: 18.0
[ 59.878] X.Org XInput driver : 21.0
[ 59.878] X.Org Server Extension : 8.0
[ 59.879] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 59.879] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 59.880] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 10 paused 0
[ 59.880] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 59.880] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 59.881] (--) PCI:*(0:0:2:0) 8086:0416:1462:10e8 rev 6, Mem @ 0xf7400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 59.881] (--) PCI: (0:1:0:0) 10de:11e0:1462:10e8 rev 161, Mem @ 0xf6000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 59.881] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 59.881] (II) LoadModule: "glx"
[ 59.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 59.888] (II) Module glx: vendor="NVIDIA Corporation"
[ 59.888] compiled for 4.0.2, module version = 1.0.0
[ 59.888] Module class: X.Org Server Extension
[ 59.888] (II) NVIDIA GLX Module 340.65 Tue Dec 2 09:10:06 PST 2014
[ 59.888] (II) LoadModule: "nvidia"
[ 59.888] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 59.888] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 59.888] compiled for 4.0.2, module version = 1.0.0
[ 59.888] Module class: X.Org Video Driver
[ 59.888] (II) NVIDIA dlloader X Driver 340.65 Tue Dec 2 08:47:36 PST 2014
[ 59.888] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 59.888] (--) using VT number 1
[ 59.892] (EE) No devices detected.
[ 59.892] (EE)
Fatal server error:
[ 59.892] (EE) no screens found(EE)
[ 59.892] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 59.892] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 59.892] (EE)
If there are any other log/config files that you need let me know! I didn't know what all to include!32nmud wrote:Grpahics: Nvidia GeForce GTX 770M (also have the intel built in graphics but I don't have a use for it)
It is my understanding that a dual-card setup such as yours uses the integrated card to render the screen and uses the GPU as well when more intensive work is required.
Try installing the Intel video drivers as well -- the "no screens found" message usually means you don't have the necessary video drivers.
Alternatively, try disabling the Intel card from your firmware (BIOS) options.
https://www.archlinux.org/packages/?q=xf86-video-intel
https://wiki.archlinux.org/index.php/Optimus
For code tags:
[code]post terminal output here[/code] -
Xorg: Fatal server error, no screens found
Hi, I just installed Arch Linux 2010 fresh. And after my installation completed, I installed Xorg using pacman -Syu xorg-server and pacman -Syu xorg-xinit.
But when I run startx it gives me a fatal error that goes something like...
Fatal server error: no screens found
xinit: giving up
xinit: unable to connect to X Server: connection refused
xinit: server error
Take a look at this screenshot, to get the full picture..
http://www.bildites.lv/images/wieanqq9te86gbi8x246.png
What's wrong? what do i need to do to be able to run X?
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --hokasch wrote:You are installing in Virtualbox - did you set up Guest additions etc as described here? Some more random ideas - If you manually created xorg.conf files, try without them, have a look at the vboxclient thing and don't use root account for startx.
Yes, I installed the Guest additions. I don't have xorg conf file. how do i look at vboxclient? -
Xorg fattal error - No screens found - Radeon 9200
Hello,
I cant run my X server . I changed graphics card -I put my ATI Radeon 9200 into AGP. I have ATI Radeon 9200 card in AGP slot and I have also Intel 82845G integrated graphics card. I want to use my ATI card. I installed X-server based on wiki and I installed both xf86-video-intel and xf86-video-ati and of course xorg-server, xorg-server-utils and other.
Now when I type "startx" I got nice Error:
EE - no devices detected
Fatal server Error
no screens found
Any idea how can I fix it?
I found tip that I shloud add line "Busid "PCI:#:#:#" (in my axample its PCI:3:0:0) but I dont have device section in /etc/X11/xorg.conf (file is empty) so I dont know how to add this....
Adding this didnt help me... Stil the same error (no screens found).
Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "Videocard Vendor"
BoardName "ATI Radeon 9250"
BusID "PCI:3:0:0"
Option "DRI" "true"
Option "ColorTiling" "on"
Option "EnablePageFlip" "true"
Option "AccelMethod" "EXA"
Option "RenderAccel" "true"
Option "AGPMode" "4"
EndSection
But there is one good thing. When I type "Xorg -configure" and then "X -config /root/xorg.conf.new" my X-server start but I have only black screen - no mouse etc. I use KVM because I work on 3 computer and only one Monitor. When I have used only Intel 82845G I got my X-server started but now after puting ATI RADEON 9250 I cant get start X-server.
Last edited by zaboleqqq (2011-12-22 14:36:57)Can you post the whole Xorg.log by any chance? I'd also be curious to see what dmesg looks like, but that's a *huge* wall of text. If you want to share it, drop it in a pastebin and link to it. While you're at it, maybe the output of
# lspci -v
This is also huge, so pastebin it too. This set of outputs lets us see what's installed, whether it's enabled, whether or not there's any issues when the kernel talks to it, and what driver it has picked up, if any.
I sense a hardware conflict. i know that my BIOS automatically switches off the onboard Intel graphics card when i installed my Nvidia unit, but your BIOS may not, which *could* cause a conflict, especially since you have both sets of drivers installed.
Last edited by usagi (2011-12-22 22:37:03) -
Hello,
After having some problems with the glibc upgrade, I finally been able to complete the switch from /lib to /usr/lib.
Anyway, unfortunately even if now I can boot smoothly I encounter a problem after the login. Basically, after inserted username and password, selected to boot the XFCE Desktop Environment in CMD (Login Manager) I receive an error which tells me:
Check to see if you are wrapping your session with ck-launch-session or increase the timeout.
So, I've tried to boot manually typing this commands:
# xinit
# startxfce4
# startxfce4 with-ck-launch
but every time it returns me this error:
X.Org X Server 1.12.3
Release Date: 2012-07-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.4.4-3-ARCH i686
Current Operating System: Linux gianluca-laptop 3.4.5-1-ck #1 SMP PREEMPT Mon Jul 16 19:56:55 EDT 2012 i686
Kernel command line: root=/dev/disk/by-uuid/2bef0cce-027d-44fa-a086-056c390cd847 ro quiet vga=773 init=/bin/systemd elevator=bfq pcie_aspm=force i915.i915_enable_rc6=1
Build Date: 9 July 2012 04:03:16 PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time Sat Jul 28 21:16:14 2012
(==) using config directory: "/etc/X11/xorg.conf.d"
Fatal server error:
no screens found
Please consult the The X.Org Foundation support at http://wiki.x.org for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
Could it be related to glibc? I think so.
Before the upgrade of glibc the system used to start smoothly, without any problem before or after the login.
I'm going to post the /var/log/Xorg.0.log in a couple of days. I want to apologise from the beginning for this inconvenient but the only other way to access the internet for me is by a BlackBerry, and I cannot imagine how to save the Xorg log in the BlackBerry for copy it and post it in the forum. Ok, I can use the BB as an USB stick, but I prefer not risk doing something I'm not able to do, whilst on Monday I can do it comfortably in a library.
If it can help, in my system is installed the package xf86-video-intel 2.20.2-2, the xorg drivers for my hardware.
Thank you for your time,
GianlucaDSpider wrote:
https://wiki.archlinux.org/index.php/Xfce
exec startxfce4 --with-ck-launch
^ At the end of your ~/.xinitrc.
Good morning,
I've already edited the .xinitrc when upgraded to XFCE 4.10, so unfortunately it isn't the cause of the problem.
$ systemctl -- failed
UNIT LOAD ACTIVE SUB JONB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded failed failed Arbitrary Executable File Formats File System Automount Point
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
1 units listed. Pass --all to see inactive units, too.
If I check with 'systemctl -a' I can see that also the units 'auditd.service' 'display-manager.service' 'plymouth-quit-wait.service' 'plymounth-start.service' 'rc-local.service' 'syslog.service' have errors when loaded. All of them are LOAD=error, ACTIVE=inactive and SUB=dead. -
EasyStartup 3.8.1c fails to load on TS140: Fatal server error: no screens found
I just got a TS140 (70A4-000HUX). After unboxing, I installed 4 x 2TB SATA HDs, attached my external USB DVD drive, configured the BIOS to boot first from the DVD drive, and inserted the EasyStartup DVD that came with the system.
The program boots fine, and then drops out to the red hat command prompt with the following message:
(EE) VESA(0): V_BIOS address 0xd00 out of range
(EE) Screen(s) found, but none have a usable configuration
Fatal server error:
no screens found
I have tried changing the setting for the onboard VGA adapter in BIOS, but (obviously, since I'm posting this) no joy.
Not that I necessarily need this program to set up the server. But I'd like to see what it can do.
I'm also not seeing the option to press Ctrl-I to get into the Intel Rapid Storage Technology BIOS utility even though I've set the SATA controller type to RAID in the BIOS.
And it's not clear to me just what the Intel Manageability password is by default even though I can get to the prompt to login.
Any and all assistance is greatly appreciated.
Solved!
Go to Solution.And...
I figured it out.
Apparently, it's not a good idea to change the Boot setting to UEFI only. Can't use EasyStartup or the Intel BIOS for RAID in that mode.
I still need to figure out the Intel Management interface though. I reset it and apparently the old/default password is "admin" but it won't accept a new password. -
[SOLVED] X11 Fatal server error: no screens found
Hello everyone!
I have just installed Arch x86_64 and I'm using a nVidia Corporation NV18 [GeForce4 MX 4000].
I'm running the command nvidia-xconfig to set up my xorg. Then I uncommented the line exec gnome-session in my .xinitrc. When run the command startx I get the following:
[root@work ~]# startx
xauth: creating new authority file /root/.serverauth.16103
xauth: creating new authority file /root/.Xauthority
xauth: creating new authority file /root/.Xauthority
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH x86_64
Current Operating System: Linux work 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 06:42:43 UTC 2009 x86_64
Build Date: 28 May 2009 08:24:17PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 16 15:08:09 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
And looking at the log:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH x86_64
Current Operating System: Linux work 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 06:42:43 UTC 2009 x86_64
Build Date: 28 May 2009 08:24:17PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 16 15:03:08 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x3540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) nVidia Corporation NV18 [GeForce4 MX 4000] rev 193, Mem @ 0xe0000000/16777216, 0xd8000000/134217728, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.51 Fri Apr 17 00:35:49 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 180.51 Fri Apr 17 00:15:00 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) NVIDIA(0): The NVIDIA GeForce4 MX 4000 GPU installed in this system is
(WW) NVIDIA(0): supported through the NVIDIA 96.43.xx Legacy drivers.
(WW) NVIDIA(0): Please visit http://www.nvidia.com/object/unix.html for
(WW) NVIDIA(0): more information. The 180.51 NVIDIA driver will ignore
(WW) NVIDIA(0): this GPU. Continuing probe...
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Aaand my xorg.conf is:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Fri Apr 17 00:40:10 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Something weird is that if I remove the file xorg.conf I can start Gnome normally. Can anyone please tell me what is wrong?
Last edited by kdjtar (2009-06-17 15:59:17)Problem solved! I just noticed that I hadn't check which nvidia version I was using, as the log says:
(WW) NVIDIA(0): The NVIDIA GeForce4 MX 4000 GPU installed in this system is
(WW) NVIDIA(0): supported through the NVIDIA 96.43.xx Legacy drivers.
(WW) NVIDIA(0): Please visit http://www.nvidia.com/object/unix.html for
(WW) NVIDIA(0): more information. The 180.51 NVIDIA driver will ignore
(WW) NVIDIA(0): this GPU. Continuing probe...
And in fact I was using the 180.51 driver. Then I did the following:
# pacman -Rd nvidia nvidia-utils
Then:
# pacman -S nvidia-96xx nvidia-96xx-utils
And it's working now!
Thank you guys -
I am trying to download the trial of PSE 13 which consists of two files. The first downloads ok but on the second I get this message:
Downloading Adobe Photoshop Elements 13 MultipleLanguages Windows
The Akamai Download Manager has encountered an fatal error: File not found.
Same thing happens if I try to download the files individually and also in different browsers. Any ideas?Me three. I have been trying for hours, and have used three different browsers.
I have just noticed that the URL it is trying to use is looking for ...win32.exe under a directory called win64. That sounds like a stupid typo mistake. I manually modified the URL to this instead (and it downloaded something)...
http://trials3.adobe.com/AdobeProducts/PSE/13/win32/PhotoshopElements_13_LS25_win32.exe
Now I just need to figure out how to install the product manually using the two downloaded files!?! -
When installing the Windows 10 emulators, you may receive the following error:
Error: Emulators for Windows Mobile 10.0.10069 : The installer failed. Fatal error during installation. Error code: -2147023293To resolve this issue, run Visual Studio setup again to add the emulators. To do this
Reboot your computer
Open Control Panel, and select Programs and Features.
Select Microsoft Visual Studio 2015 RC, click Change, and then click
Modify.
Select the feature “Emulators for Windows 10 Mobile”, and click Update. -
Xorg crashing with fatal error
I'm not sure what the problem is but from what I can tell its probably due to Xinerama. I can't replicate this bug consistently, it seems to only appear after Xorg has been running for several days.
Running everything latest from repo.
Running on dual opteron, with 6gb ram, 64-bit arch, 2x7800GTX nvidia's, 4 screens attached, and i'm using the libfakexinerama patch
Some outputs:
Linux skynet 2.6.27-ARCH #1 SMP PREEMPT Sun Dec 21 09:13:30 UTC 2008 x86_64 Dual Core AMD Opteron(tm) Processor 280 AuthenticAMD GNU/Linux
[geniesis@skynet log]$ pacman -Qi nvidia
Name : nvidia
Version : 177.82-1
[geniesis@skynet log]$ pacman -Qi xorg
Name : xorg
Version : 11R7.0-1
Here is the backtrace:
(==) ServerLayout "PCIe 4screen"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Device1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "Xinerama" "1"
+++++++++++++++++++++++++++++
+++++++OTHER OUTPUT++++++++++++
+++++++++++++++++++++++++++++
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
AUDIT: Mon Jan 26 18:35:03 2009: 23590 Xorg: client 5 rejected from local host ( uid=102 gid=102 pid=23614 )
AUDIT: Mon Jan 26 18:35:03 2009: 23590 Xorg: client 5 rejected from local host ( uid=102 gid=102 pid=23615 )
AUDIT: Mon Jan 26 18:35:03 2009: 23590 Xorg: client 5 rejected from local host ( uid=102 gid=102 pid=23616 )
Backtrace:
0: /usr/bin/Xorg(xorg_backtrace+0x26) [0x4ed8e6]
1: /usr/bin/Xorg(xf86SigHandler+0x39) [0x496739]
2: /lib/libc.so.6 [0x7f10b81e1150]
3: /usr/bin/Xorg(PanoramiXGetGeometry+0x141) [0x50edb1]
4: /usr/bin/Xorg(Dispatch+0x364) [0x44d034]
5: /usr/bin/Xorg(main+0x45d) [0x43369d]
6: /lib/libc.so.6(__libc_start_main+0xe6) [0x7f10b81cd546]
7: /usr/bin/Xorg [0x432a79]
Fatal server error:
Caught signal 11. Server aborting
(II) IR-receiver inside an USB DVB receiver: Close
(II) UnloadModule: "evdev"
(II) Microsoft Microsoft IntelliMouse? Explorer: Close
(II) UnloadModule: "evdev"
(II) Plantronics Plantronics Headset: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
Any ideas why this might be happening?Yup This is arch.
Did a pacman -syu today
[geniesis@skynet ~]$ pacman -Qi xorg
Name : xorg
Version : 11R7.0-1
Yes, i know its a dummy package. But it references the versions.
[geniesis@skynet ~]$ pacman -Qi xorg-server
Name : xorg-server
Version : 1.5.3-4
[geniesis@skynet ~]$ pacman -Qi nvidia
Name : nvidia
Version : 180.22-1
[geniesis@skynet ~]$ pacman -Qi nvidia-utils
Name : nvidia-utils
Version : 180.22-1
[geniesis@skynet ~]$ uname -a
Linux skynet 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 25 09:43:53 UTC 2009 x86_64 Dual Core AMD Opteron(tm) Processor 280 AuthenticAMD GNU/Linux
Its still happening. And its the same error as before. -
Reinstallation Issue (fatal error 1603)
Hello, I am a new Skype user and it seems that I am not the only one to be exeriencing this issue.
I, as well as others, am having issues reinstalling Skype on my computer. I wanted to see if I could uninstall and reinstall the program out of curiosity. Uninstalling it was very simple but reinstalling it is very difficult since every time I try, I am given an error message.
The installing process is completely normal until the loading bar which will not fill up. It will, instead, scroll slowly for a few minutes then freeze and continue scrolling quite quickly until an error message appears. I am running XP but I do not believe this is the issue and I can not understand why I am having issues. I have tried the steps listed in help, even installed the Microsoft Fix It, but that did not help. The only thing I haven't done is restart my computer.
If someone would please help me, I would be thankful.Emi-_- is the Processor SSE2?
To check it try to use: CPU-Z
If not means that Skype 7.1 that probably you are using is not compatible with your XP OS.
Here is a list of old Skype Apps: Download Skype
¿Mi respuesta contesto a tu pregunta? Acéptala como solución para ayudar a otros.
No olvides en hacer clic en el botón Kudos! -
FATAL: module iwl4965 not found[SOLVED]
When booting from the CD to install Arch it detected and "installed" my intel 4965 wireless NIC just fine. However, now that I have arch installed it is giving me the error above. How can I go about grabbing the module off of the install disc and getting it running on my machine? Thanks for your time in advance.
Last edited by isolier (2008-01-10 09:58:01)Ok here is my rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Canada/Pacific"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=(e1000 iwl4965 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="me"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
# interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo !eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
NET_PROFILES=(wifiProfile)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond alsa)
# End of file
Then the file "wifiProfile" residing in /etc/network-profiles is:
# Network Profile
DESCRIPTION="Home Wireless Network"
# Network Settings
INTERFACE=wlan0
HOSTNAME=me
# Interface Settings (use IFOPTS="dhcp" for DHCP)
IFOPTS="dhcp"
#GATEWAY=192.168.0.1
# DNS Settings (optional)
#DOMAIN=localdomain
#DNS1=192.168.0.1
#DNS2=
# Wireless Settings (optional)
ESSID=myWifi
#KEY=
#IWOPTS="mode managed essid $ESSID channel 6 key restricted $KEY"
#WIFI_INTERFACE=wlan0 # use this if you have a special wireless interface
# that is linked to the real $INTERFACE
#WIFI_WAIT=5 # seconds to wait for the wireless card to
# associate before bringing the interface up
USEWPA="yes" # start wpa_supplicant with the profile
WPAOPTS="" # use "" for normal operation or specify additional
# options (eg, "-D ipw")
# see /etc/wpa_supplicant.conf for configuration
AUTOWPA="yes" # automatically configure WPA
PASSKEY="secretPassword" # wpa passkey/phrase. for use with AUTOWPA
So there you have it, hope it helps. -
Kernel update (3.9.5-1) causes graphics issues, X11 "no screens found"
Earlier I updated my system with pacman -Syu. Everything went smoothly. I rebooted and immediately noticed something was wrong with the console framebuffer - printing and scrolling are very, very slow and jerky, an error flashed by after fsck too quickly to read (since disappeared), and startx gave me the "no screens found" error. I do not have any custom X11 configuration.
This is an MSi laptop with the (awful) nVidia Optimus (hardware mux).
IGP is an Intel Ivybridge Mobile (GT2), don't know the exact chipset model, X logs indicate it's the i965.
DGP is an NVIDIA GK104M (GeForce GTX 675MX).
(New) Kernel: 3.9.5-1-ARCH #1 SMP PREEMPT ... x86_64
(Old) Kernel: 3.9.4-1 ...
I should mention that I use the acpi_call package to shut the DGP down, the command runs automatically at boot (but does not work! An AE_CALL error message is given, I have to run the turn_off_gpu.sh script manually after login). Nouveau is still being loaded into the kernel, regardless. I have tried removing the .conf file used by acpi_call from /etc/modules-load.d/, there was no effect. I also tried downgrading from the latest xf86-intel driver package, again, no effect - under either kernel. Additionally I tried using nomodeset and i915.modeset = 1 kernel parameters (which were necessary with a previous kernel version or Arch was unbootable, but not with 3.9.4-1). No effect. Each change was followed by a reboot, just to be sure. Systemd is loading everything normally except that it complains of no display-manager service ... because there isn't one.
It may be trying to use the DGP, for which there are no drivers installed, as I have no desire to use that card with Linux, ever; I've no idea why/how a kernel update would change this, as I mentioned I have nothing fancy going on with kernel 3.9.4-1 and the graphics setup and X11 work just fine out of the box.
Thanks in advance for you help.No, the i915.modeset parameter was necessary with an older kernel.
I've now also tried kernel 3.9.6-1 and nvidia drivers, with AND without an xorg 10-monitor.conf file. Running kernel 3.9.6-1 seems to fix the console framebuffer issue, but the "no screens found" issue remains, xserver logs complain of not being to find intel module when using nvidia drivers (which require removal of intel drivers), and both sudo and netctl are broken - logs list pam-unix "conversation failed" error and time-out/failed dependency waiting for wplXXX - the wireless NIC - to start.
Just to see, I tried the nvidia drivers with kernel 3.9.4-1 and got the "no screens found" error.
Because I couldn't access the internet under kernel 3.9.6-1, I didn't get to test it with nouveau but I can't see how that would be any different - it has no Optimus support, anyway.
One more probably unrelated thing: all indicator LEDs (except power button) and touch-button LEDs no longer light up, under 3.9.4-1 with no changes to packages in a few days.
I'm stumped. -
[SOLVED] iMac Blackscreen / Xorg no screens found
Hello ladies and gentlemen,
this is my first post so far. I am very satisfied with my archlinux setup on my macbook (2006). But i ran into a Problem i could not solve with google, arch forum and arch wiki.
=== The Setup ===
iMac from late 2010 (Computer with built-in Monitor)
Archlinux install from nov. 2012
=== The story ===
I tried a lot of Linux distributions to install:
- Archlinux (from CD, Install-Image from 11/2012 )
- Ubuntu (from USB, v. 12.10 & 12.04 LTS)
- Cinnarch (12.11.22 minimal netinstaller)
I always ran into the same problem:
Booting w/ a black screen (no LED Backlight - It was possible to login and reboot the computer blindly)
booting w/ screen with nomodeset
I tried the Opensource ATI driver (i used the walkthrough on the WIKI)
and i also tried the closed-source catalyst-234k driver with old xorg-server (1.12 and 1.11).
=== The Issue ===
Normal Boot:
After ~1s of STDoutput i get a black screen without LED backlight (its like unplugging the Monitor) - I was able to login and reboot blindly
Fallback Boot (with Kernelmode "nomodeset" and "debug")
I can boot with no problems - but im not able to launch an xorg-server successfully.
I have no possibility to "startx" or "Xorg -configure" - it always throws me an error (No screens found)
=== The Logs / System Information ===
lsmod | grep radeon
radeon 859655 0
ttm ... 1 radeon
drm_kms_player ... 1 radeon
drm ... 3 ttm,drm_kms,radeon
i2c_algo_bit ... 1 ....
i2c_core ... 6 ...
lspci | grep VGA
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 XT [Mobility Radeon HD 4670]
cat /var/log/Xorg.0.log | grep EE
(EE) failed to load module VESA (module does not exist)
(EE) No drivers available
the xf86-video-ati is installed!
and if i install vesa drivers:
the screen freezes on startx and i have to hard-reboot.
I cant list whole log here, because i need to retype everything x(
cat/var/log/Xorg.0.log
...only informational stuff, some warnings and no errors:
(WW) the directory (/usr/share/fonts(OTF/) does not exist.
(WW) open ACPI failed (/var/run/acpid.socked)(no such file or directory)
and on Xorg -configure
Number of created screens does not match number of detected devices.
Configuration failed.
Server terminated with error 2. closing logfile
my /root/.xinitrc and ~/.xinitrc
exec gnome-session
(yes, gnome is installed!)
thats it so far. any help?
=== The Solution ===
- none yet.
Last edited by moolen (2012-12-07 09:50:27)I worked it out.
i used the awesome AUI script by helmuthdu
https://github.com/helmuthdu/aui
i installed X, loginmanager and a Desktop environment and it works well. -
[Xorg] some issues with i915 and gdm
Hi all
I'm having some issues starting the X server. I don't know how it happened, my netbook was on standby. After I turned it on, there were loud beep sounds coming out of my computer and the screen was completely black so I shut it down. After I turned it back on I got following issue:
gdm-binary[4585]: WARNING: GdmDisplay: display lastet 0,135094 seconds
gdm-binary[4585]: WARNING: GdmDisplay: display lastet 0,137406 seconds
gdm-binary[4585]: WARNING: GdmDisplay: display lastet 0,135166 seconds
gdm-binary[4585]: WARNING: GdmDisplay: display lastet 0,135076 seconds
gdm-binary[4585]: WARNING: GdmDisplay: display lastet 0,474816 seconds
gdm-binary[4585]: WARNING: GdmDisplay: display lastet 0,141715 seconds
gdm-binary[4585]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
Ok so I tried to start X only:
Build Date: 17 February 2010 07:52:42PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 19 21:36:21 2010
(==) Using config file: "/etc/X11/xorg.conf"
(EE) intel(0): No kernel modesetting driver detected.
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
then, I upgraded my system (there was a kernel update) and now I get this when I start X:
Build Date: 17 February 2010 07:52:42PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 19 21:45:33 2010
(==) Using config file: "/etc/X11/xorg.conf"
FATAL: Error inserting i915 (/lib/modules/2.6.32-ARCH/kernel/drivers/gpu/drm/i915/i915.ko): Unknown symbol in module, or unknown parameter (see dmesg)
(EE) intel(0): No kernel modesetting driver detected.
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
I don't know what to do I tried to search the net but I couldn't find much helpful information..
--blackdeagleI don't think there is a problem with the x.org configuration so I hope you backed it up. This line indicates the problem:
(EE) intel(0): No kernel modesetting driver detected.
Make sure you haven't disabled KMS (like using i915.modeset=0 in /boot/grub/menu.lst).
Maybe you are looking for
-
Hi everyone, I have a PDF that has some pages which are portrait, and some which are landscape. When I print it using preview, all pages are printed in portrait mode. When I print it using Adobe, it prints correctly (portrait pages print in portrait
-
HCM Process and Forms - Clarification required reg BADI QISR1.
Hi all, I want to have some extra validations done on some of the fields of my HCM Process Adobe form. For this, I created a new implementation for the BADI QISR1 with filter value as my Custom Scenario and implemented the method INT_SERVI
-
Firefox normally works just fine till I right clicked and seclcted the "Block this site" option by mistake. Now i can't access Firefox at all. When using the short cut or the actual file location I will ether get a completely blank window or a messag
-
Hey guys, just a quick question because I forgot. I have an updateable report and I want to keep pagination when I edit something and click on Save but I'm always transfered back to page 1(set of results) Any help?
-
Why is facetime taking so long to be downloaded in my macbook pro?
I clicked the facetime button and a downloading message shows but it already 30 minutes, and it's still downloading mode. I'm at 4g connection already!