XORG: Keyboard don't work right

Hi,
after the last System update my keyboard (under xorg) is totally messed up! The arrow keys,the del key the Pos1 key, the End key..... all don't work. All characters numbers and special characters like(!"§$%&/....) work though. Even the German "Umlauts" are working!
Here my xorg.conf:
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 64.3
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-100
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1400x1050" "1280x1024" "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
and the corresponding log:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux stella 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:56:24 UTC 2008 i686
Build Date: 05 December 2008 09:10:55PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 9 17:03:13 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** ATI Radeon (generic) [radeon]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d5900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xa8000000/0, 0xe0010000/0, I/O @ 0x0000c100/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 6.9.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon HD 3470,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI FireMV 2450, ATI FireMV 2260,
ATI FireMV 2260, ATI ATI Radeon HD 3600 Series,
ATI ATI Radeon HD 3650 AGP, ATI ATI Radeon HD 3600 PRO,
ATI ATI Radeon HD 3600 XT, ATI ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000e0010000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP)" (ChipID = 0x4e50)
(--) RADEON(0): Linear framebuffer at 0x00000000a8000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=65536K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 20000, sclk: 200.000000, mclk: 390.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000; xclk=20000
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section My Monitor
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Panel ID string: AUO
(II) RADEON(0): Panel Size from BIOS: 1400x1050
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1400, YRes: 1050, DotClock: 108000
HBlank: 240, HOverPlus: 48, HSyncWidth: 112
VBlank: 15, VOverPlus: 1, VSyncWidth: 3
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL
(II) RADEON(0): Port0:
Monitor -- AUTO
Connector -- VGA
DAC Type -- Primary
TMDS Type -- None
DDC Type -- 0x60
(II) RADEON(0): Port1:
Monitor -- AUTO
Connector -- LVDS
DAC Type -- None
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): Port2:
Monitor -- AUTO
Connector -- STV
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output LVDS using initial mode 1400x1050
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.0
ABI class: X.Org Video Driver, version 4.1
(==) RADEON(0): Assuming overlay scaler buffer width is 1920
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit a8000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x04000000
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1408,1202)
(II) RADEON(0): Largest offscreen area available: 1408 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0xd10000
(II) RADEON(0): Will use depth buffer at offset 0x1382000
(II) RADEON(0): Will use 38912 kb for textures at offset 0x19f4000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xa8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4e50]
(II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xb0000000
(II) RADEON(0): [agp] Ring mapped at 0xb37a2000
(II) RADEON(0): [agp] ring read ptr handle = 0xb0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb7f7a000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xb0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb35a2000
(II) RADEON(0): [agp] GART texture map handle = 0xb0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb1922000
(II) RADEON(0): [drm] register handle = 0xe0010000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 10
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xabffa800 is: 0xabffa800
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xb1ffb000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800 0xabffa800
(II) RADEON(0): MC_AGP_LOCATION : 0xb1ffb000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00674c00
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00678e00
(II) RADEON(0): Largest offscreen area available: 1408 x 6983
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800 0xabffa800
(II) RADEON(0): MC_AGP_LOCATION : 0xb1ffb000
restore common
restore crtc1
restore pll1
finished PLL1
restore LVDS
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 370 x 277
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.99.1
(**) Option "Device" "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device Logitech USB Receiver
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.7
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event4"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Logitech USB Receiver: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Logitech USB Receiver: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech USB Receiver: xkb_layout: "us"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event3"
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found mouse buttons
(II) Logitech USB Receiver: Configuring as mouse
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(II) config/hal: Adding input device C-Media USB Headphone Set
(**) C-Media USB Headphone Set: always reports core events
(**) C-Media USB Headphone Set: Device: "/dev/input/event2"
(II) C-Media USB Headphone Set: Found keys
(II) C-Media USB Headphone Set: Configuring as keyboard
(II) XINPUT: Adding extended input device "C-Media USB Headphone Set" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) C-Media USB Headphone Set: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) C-Media USB Headphone Set: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) C-Media USB Headphone Set: xkb_layout: "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
sorry for this huge post - but i think that's all needed.... so does anybody have a clue?
thanks and bye
smax

Thanks Bob for that very fast reply!
But neither "Modifying hal configuration" nor "Using the Desktop Environment settings" (xfce) worked. So I tried the "I don't want this crap, how do I turn it off?" solution and well it works
Maybe I turn it back on in a month or so.. but for now i'm fine with no hot plugging but a working keyboard...
Thanks and Bye!
smax
Last edited by smaxer (2008-12-09 17:42:43)

Similar Messages

Some keys on keyboard don't work

I got a used MacBook air on eBay and I noticed the some keys on the keyboard don't work as intended.
For example, the '1' key does not work at all, the 'p' key would increase the volume, the 'delete' key would enable capslock.
I've tried to do a clean install of Mac OS X but it would still do the same thing.
Is my logic board broken?
What else can I try to make sure that the keyboard is the problem and not the software?

Hello:
Try resetting the PRAM.
By the way, what tests are you referring to?
Barry

USB mouse and keyboard don't work on HP Pavilion g7 2203sd, Windows 8.1.

It is not possible to use a USB mouse or keyboard on the HP Pavilion g7 2203sd notebook running Windows 8.1.
A wireless mouse used to work (already some time ago), but now wired or wireless mouse and keyboard don't work any more.
I have tried removing USB devices in the Windows Device Manager and let Windows detect them again, but it does not work.
I read somewhere that it might have to do with the xHCI USB controller that is installed.
I tried removing that and connecting the USB mouse but no succes.
I also looked for driver updates or something to disbale in the BIOS (like xHCI), but nothing found for that.
Can anybody help me with this problem.
Thanks!

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are having issues with the Keyboard on your Notebook.
We will surely assist you with this.
Let’s start with a questions.
1. Was there any liquid split on the Notebook Keyboard
2. Is there any Dust settled on the Notebook Keyboard
3. Are there any Keys which are fallen off / Any Keys which are loose
Troubleshooting:
Step 01. Could you please check and verify if External Keyboard works fine or not?
Note: Please click on the below shown link to find more troubleshooting steps
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03738933&tmp_task=solveCategory&cc=us&dlc=en&lc...
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

Occasionally when filling in forms in Safari 5.1.2 certain keys on the keyboard don"t work. When I use the coma it opens up another tab.

Occasionally when filling in forms in Safari 5.1.2 certain keys on the keyboard don"t work. When I use the coma it opens up another tab. I've used other browsers to fill in the forms and they work fine so my keyboard is OK.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is localized to your user account, or is system-wide. Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select “Help” from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Any application you run will behave as if you were running it for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
As Guest, launch the application(s) and test. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.

Arrow keys on my wired keyboard don't work. How do I fix these?

The four (4) arrow keys on my wired keyboard don't work. How do I fix these?
Sorry, I came from a PC and am very new to the Mac.
Thanks.

Did you check the long verticle silver button on the left side of the phone? It is above the + & - Keys. If it is pushed down, you will have no volume. THis is a key to quickly shut off the volume if you forgot to trun it down during a meeting, funeral, etc. If that is okay, go into settings and see if volume is turned on. "vibrate" is no longer an option by itsself.
Helen

My touchpad and keyboard don't work.

When I turn on my computer, my touchpad and keyboard don't work, and only the touchscreeen seems to function properly. It only turns on after a good ten or fifteen minutes. I have had to use a mouse.

hey maybe this link http://www.ubuntuask.com/q/answers-touc … 89324.html will help you, for me reloading the kernel module for the mouse with "modprobe -r psmouse" and "modprobe psmouse" did the trick.

Xorg -configure don't work with PB DotM

hello folks
i got a brand new packardbell dotM netbook , how i use arch in my worksation i decided to install arch in the netbook
every goes fine exept when i want to configure Xorg.
i installed the xf86-video-intell package, and tryed to make a "Xorg -configure" that work with the screen ( by the way the screen is very special http://www.tecnologiait.com.ar/?p=7315 the standart resolution is 1204x600 !!
what recommend me do to guys?, use Xorg -configure don't work ( even show tvm) , and intel doesn't provide a tool like the nvidia-xconfig,
or should i write my own xorg.conf file?
ohh yes and could you make me a suggestion for a DE, i tried kdemod in the netbook ( i am kde-lover) but without a big Gpu kdemod goes slow, which DE to do recommend for a netbook, i am between E17 and LXDE
thanks in advance

Hello Slacknatcher!
You can port a working configuration file, from another working distribution, or from livecd like Chakra, Ubuntu, Sushe.
Can it work if you try without any xorg.conf file? Can you try out another drivers, like binary nvidia from nvidia, or opensource nv? And in the last case vesa?

[bug] Numpad keyboard don't work with fractions in Spotlight calculations

In the hopes that the community can shine some light on this problem or possibly come up with an easy fix, I am posting a copy of a bug #7168140 here on the forums.
Numpad keyboard don’t work with fractions in Spotlight calculations
Summary:
Spotlight cannot perform calculations with fractions where the separator is comma (as it is in Norwegian) instead of the American period.
The Apple aluminum keyboard with numpad in Norwegian locale (Æ, Ø, and Å) have a comma instead of a period on the numpad (this differs from US keyboard with numpads).
Steps to Reproduce:
(Norwegian bokmål system local and a Norwegian keyboard with numpad required)
1. Open Spotlight using Command–Space
2. On the numpad, type: 79,9+56,50
Expected Results:
136,40
Actual Results:
"No result."
Screenshots:
http://yfrog.com/0tshotofspotlightp
http://yfrog.com/2qapplenorwegiannumpadp
Notes:
This works as expected in Calculator.app, but not with the Spotlight calculator.

It works in 10.6 Snow Leopard!

Screen & keyboard don't work

Hi all.
I've got a problem with my eMac. When I try to boot it, i've got a black screen. The keyboard doesn't work, I cannot open the cd-case, e.g.
I hear a sound and then 3 tones at the booting.
There are solutions on the troubleshooting of apple.com, but I can't use them because of my keyboard doesn't work anymore.
Thanks for your answers.

Thank you all !
My computer works again now
But I've goy a last question.
(First, sorry if I don't speak english very well, I do my best (I'm from France)).
I've got 2 slots for RAM in my eMac. But only 1 "piece" of RAM (I don't find the right word XD).
So, I took the RAM and I putted it in the second slot.
This makes me think that the first slot is damaged. Do you think that I can fix that by myself?
Thanks, I'm going back to my english lessons

Thinkpad t42 mouse and keyboard don't work after factory reset

I get to the system preperation tool 2.0 but i cant click or select anything . Same thing happens if i turn the machine on and go into safe mode - the keyboard works to select safe mode but when I get to safe mode they both don't work. they both work if i go into the IBM recovery menu.
Any help would be appreciated
Thanks
DK
Solved!
Go to Solution.

Hi DK,
If you are using the Rescue and Recovery to reload Windows, you should never see the "SysPrep 2.0" appear. Are you using the orignal recovery CDs to reload windows or booting from the F11 partition? To fix this problem, I would simply start the process of reinstalling Windows again.
Go to this website and follow the guide for Using Rescue and Recovery to Recover your OS
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70803
If you are still seeing the "System Preparation Tool 2.0" after reloading Windows, do the following:
Step 1: Under the "Options" box, make sure the following are checked:
"Don't reset grace period for activation"
"Use Mini-Setup
"Don't regenerate security identifiers"
Step 2: In the drop down menu for "Shutdown mode", change this setting to "Quit"
Step 3: Click the "Reseal" button
This should resolve your issue. Be sure to reload the OS using R&R FIRST before doing the above steps.
Regards,
Mark
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

Keys on my Keyboard don't work?!

Ok, be gentle, i have no clue...
For the past day now, *my full stop*, *question mark-forward slash*, and the *letter 'p'* and also my *arrow button's* , and *Cap's lock* button's... DON'T WORK!!!?
And it's driving me mad! (currently i am copy and pasting them all at the moment-which is rather annoying)
is there any way to reset the keyboard? although any such way to make them work is great...
My warranty has just expired in January, and my nearest apple store is a 2 hour drive away so i extremely grateful of any help anyone has!!
Thank you!

what you can do is a SMC reset: shut down, pull the battery & power adapter. Hold the button for 20 secs. Install battery & adapter, power up holding Cmd Option P R until you force the machine to chime 3 times total (30-45 secs between chimes).
If this doesn't work or the PRAM can't be reset, they try an external keyboard.
Only try the next step if you are confortable taking the wireless card & a cover off (4 screws): you can try pulling the keyboard, tap on the edge or blow out with air cleaner to see if there's any junk in there. hardest part is dealing with the airport card.
Instructions: http://www.ifixit.com/Guide/Repair/iBook-G4-14-Inch-933-MHz-1-33-GHz-Keyboard/17 7/1
If it's still not working, then it's likely you'll need a new keyboard.

My keyboard does not work right how can i fix it

I have the iphone4 I bought from Verizon about 2 months ago and now my key board will not work right how do I fix this? I have tried to reset factory settings and all of that but it did not work! If I can not fix it my self will Verizon send me a new one ?

That's a very important component of your phone, tiffanymoyle. Let's see what we can do to get your keyboard back up and running correctly. What issues are you encountering with the keyboard? Do certain letters not register when pressed? Does it make a difference if you turn your phone to function in landscape mode?
NicandroN_VZW
Follow us on twitter @VZWSupport

My keyboard doesn't work right. Help! please

My computer is used and I just bought it recently. The guy I bought it from did something to the keyboard and i dont know how to fix it. The backspace key doesn't backwards delete. it only foward deletes, even when I press fn+delete. And also in imovie the keys start to work as if im pressing command+A, for example, when all I'm doing is typing in a title. Also, the arrow keys don't work properly either. They move as if I'm pressing command+^, command+>, etc. but they dont move down or up or side between letter, words, lines, or paragraphs. Please help me fix it.

Unfortunately you are going to need to do an Archive and Install of your OS. Insert the OS disk that came with your unit, or your Leopard install disk and RESTART then hold down the [Option] key. Select the install disk and perform and Archive install (in the options you can deselect languages and printer drivers). After the install is complete you should be able to use your keyboard. Be sure to run all your updates.
In an Archive install you will not lose any data, however you will need at least 6-8 GB available on your internal drive. If you don't have that space available, make an Apple Genius Bar appointment and bring along an external drive for them to remove some of your data to free up some space.

The number keys on wireless keyboard don't work

the number keys on my Mac desktop wireless keyboard don't work

Which version of OS X are you using?
• If Snow Leopard (10.6.x) or earlier, go to System Preferences > Universal Access
• If Lion (10.7.x) or later. go to System preferences > Accessibility
In the Mouse section in the preceding, look for the item Mouse Keys - if that function is "on", turn it off.

Downloaded iOS6 yesterday and now many apps and logins don't work right

I downloaded iOS6 yesterday and now certain apps and logins don't work right

Start with this and see of it helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

XORG: Keyboard don't work right

Similar Messages

Maybe you are looking for