Xorg, Nvidia and Monitor problem
It all started when I saw a strange startup problem (lower resolution than my usual 1366X768) and some startup messages, on my system (Pcc tower plus a Sony Bravia 32' TV, that I use as a monitor. I started this thread https://bbs.archlinux.org/viewtopic.php?id=105910 but soon realised my problem was elsewhere. Reviewing the xorg log I see that xorg is unable to read EDID from the monitor and falls to auto-selection of resolution resulting to a 1024X768 (further on DPI calculation is also affected). So, has anyone had the same problem or has any idea?
I should mention that I use a VGA cable (there is a possibility that I messed things up when I tried an HDMI cable once or twice, not sure though, maybe the problem was already present, I can't remember), and that when running the nvidia settings manager, I do not get the desired 1366X768 option. The best option is the 1024X768. Needless to say that my TV is widescreen. Ideas please...
So, my lspci shows
00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0f.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:10.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:11.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:12.0 VGA compatible controller: nVidia Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
and my xorg log (the nvidia related part) is
[ 27.279] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 27.279] (==) NVIDIA(0): RGB weight 888
[ 27.279] (==) NVIDIA(0): Default visual is TrueColor
[ 27.279] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.279] (**) NVIDIA(0): Enabling RENDER acceleration
[ 27.279] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 27.279] (II) NVIDIA(0): enabled.
[ 27.904] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 27.905] (II) NVIDIA(0): NVIDIA GPU GeForce 7050 PV / nForce 630a (C68) at PCI:0:18:0
[ 27.905] (II) NVIDIA(0): (GPU-0)
[ 27.906] (--) NVIDIA(0): Memory: 524288 kBytes
[ 27.906] (--) NVIDIA(0): VideoBIOS: 05.67.32.10.17
[ 27.906] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 27.906] (--) NVIDIA(0): Connected display device(s) on GeForce 7050 PV / nForce 630a
[ 27.906] (--) NVIDIA(0): at PCI:0:18:0
[ 27.906] (--) NVIDIA(0): CRT-0
[ 27.906] (--) NVIDIA(0): CRT-0: 350.0 MHz maximum pixel clock
[ 27.906] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 27.906] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
[ 27.906] (WW) NVIDIA(0):
[ 27.906] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[ 27.906] (WW) NVIDIA(0): "nvidia-auto-select".
[ 27.906] (WW) NVIDIA(0):
[ 27.906] (II) NVIDIA(0): Validated modes:
[ 27.906] (II) NVIDIA(0): "nvidia-auto-select"
[ 27.906] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 27.906] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 27.906] (WW) NVIDIA(0): from CRT-0's EDID.
[ 27.906] (**) NVIDIA(0): DPI set to (37, 49); computed from "DisplaySize" Monitor
[ 27.906] (**) NVIDIA(0): section option
[ 27.906] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 27.906] (--) Depth 24 pixmap format is 32 bpp
[ 27.907] (II) NVIDIA(0): Initialized GPU GART.
[ 27.910] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 27.910] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 27.910] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 27.910] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 27.910] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 27.910] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 27.910] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 27.910] (II) NVIDIA(0): Config Options in the README.
[ 27.910] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 27.996] (II) Loading extension NV-GLX
[ 28.031] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 28.040] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 28.040] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 28.046] (==) NVIDIA(0): Backing store disabled
[ 28.046] (==) NVIDIA(0): Silken mouse enabled
[ 28.055] (==) NVIDIA(0): DPMS enabled
Thanx
Darksoul71 wrote:
Have you tried to extract the EDID info from the TV set manually ?
Check out: https://aur.archlinux.org/packages.php?ID=13706
Then you could load them via Xorg command,
nvidia proprietary drivers do have problems to get EDID data. nouveau drivers, for instance, is much better for this.
I had a similar problem with my screen, have a look at : https://wiki.archlinux.org/index.php/Nv … ly_display
Similar Messages
-
V5-571G Bios, iGpu/Nvidia and bluetooth problem
I am Peter from The Netherlands.I own an Acer Aspire V5-571G 32364G32Makk for 2 years now.Last week I updated my BIOS from version 1.14 to 1.22 and I am very disappointed because: I can't choose anymore what to use, the iGPU or the Nvidia 620GT chip. Before the update it was possible to change. It is now disappeared from the BIOS!!!Next problem appeared to: my bluetooth is not working anymore!!! I tried to downgrade the BIOS to 1.14 back, but due the version chech it will not downgrade. Tried in Windows and DOS. I like to ask the Acer team: release a new BIOS where I can choose from for the iGPU or the Nvidia and that Bluetooth will work again. (Or tell me how to downgrade to 1.14 myself)I tried and read many sites on internet and no one could make me capable to do it (changing .ini files etc).Please help. Thank you!
Bluetooth is working again
-
Hi all, I'm having issues with my Nvidia 8400gs card on my up2date arch system. Im using Gnome 3.4 (fallback mode, ie not gnome-shell) and xorg-server 1.12.1-1
Using Nouveau drivers everything works like a charm except blender, which crashes from time to time.
I would love it if I could stick to nouveau! but from what I read its not recommended for intensive blender use
so im trying nvidia's closed drivers
but...
Using the propietary nvidia driver (nvidia 295.49-1 and nvidia-beta 302.07-1) I can work flawlessly in blender, except that Blender freezes for a few seconds when closing it. Some times its a few seconds, and sometimes I have to reboot because it takes so long.
After the "freezing" i see this in Xorg.0.log:
(EE) NVIDIA(0): Error recovery failed.
(EE) NVIDIA(0): *** Aborting ***
this happens with both LTS kernel (linux-3.0.31-1-lts) and linux-3.3.5-1
so, I've been trying the nvidia-275xxx driver but i see that not supported by Xorg anymore.
Xorg.0.log
================ WARNING WARNING WARNING WARNING ================
[ 18.504] This server has a video driver ABI version of 12.0 that this
driver does not officially support. Please check
[url]http://www.nvidia.com/[/url] for driver updates or downgrade to an X
server with a supported driver ABI.
=================================================================
[ 18.504] (EE) NVIDIA: Use the -ignoreABI option to override this check.
and then the nvidia driver fails to loadat all.
I hope I dont have to downgrade X to make blender work!
any directions??
I paste here some more of Xorg.0.log with some comments on what triggered some parts.
thanks in advance for any tips!!
X.Org X Server 1.12.1
Release Date: 2012-04-13
[ 351.645] X Protocol Version 11, Revision 0
[ 351.645] Build Operating System: Linux 3.3.1-1-ARCH x86_64
[ 351.645] Current Operating System: Linux psyd 3.0.31-1-lts #1 SMP PREEMPT Mon May 7 19:56:18 CEST 2012 x86_64
[ 351.645] Kernel command line: root=/dev/mapper/VolGroup00-lvolroot resume=/dev/mapper/VolGroup00-lvolswap ro
[ 351.645] Build Date: 14 April 2012 07:09:45AM
[ 351.645]
[ 351.645] Current version of pixman: 0.24.4
[ 351.645] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 351.645] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 351.645] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 12 11:30:44 2012
[ 351.645] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 351.645] (==) No Layout section. Using the first Screen section.
[ 351.645] (==) No screen section available. Using defaults.
[ 351.645] (**) |-->Screen "Default Screen Section" (0)
[ 351.645] (**) | |-->Monitor "<default monitor>"
[ 351.646] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 351.646] (==) Automatically adding devices
[ 351.646] (==) Automatically enabling devices
[ 351.646] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 351.646] Entry deleted from font path.
[ 351.646] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 351.646] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 351.646] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 351.646] (II) Loader magic: 0x7c7ae0
[ 351.646] (II) Module ABI versions:
[ 351.646] X.Org ANSI C Emulation: 0.4
[ 351.646] X.Org Video Driver: 12.0
[ 351.646] X.Org XInput driver : 16.0
[ 351.646] X.Org Server Extension : 6.0
[ 351.646] (--) PCI:*(0:1:0:0) 10de:0422:1682:2309 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
[ 351.646] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 351.646] (II) LoadModule: "extmod"
[ 351.647] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 351.647] (II) Module extmod: vendor="X.Org Foundation"
[ 351.647] compiled for 1.12.1, module version = 1.0.0
[ 351.647] Module class: X.Org Server Extension
[ 351.647] ABI class: X.Org Server Extension, version 6.0
[ 351.647] (II) Loading extension MIT-SCREEN-SAVER
[ 351.647] (II) Loading extension XFree86-VidModeExtension
[ 351.647] (II) Loading extension XFree86-DGA
[ 351.647] (II) Loading extension DPMS
[ 351.647] (II) Loading extension XVideo
[ 351.647] (II) Loading extension XVideo-MotionCompensation
[ 351.647] (II) Loading extension X-Resource
[ 351.647] (II) LoadModule: "dbe"
[ 351.647] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 351.647] (II) Module dbe: vendor="X.Org Foundation"
[ 351.647] compiled for 1.12.1, module version = 1.0.0
[ 351.647] Module class: X.Org Server Extension
[ 351.647] ABI class: X.Org Server Extension, version 6.0
[ 351.647] (II) Loading extension DOUBLE-BUFFER
[ 351.647] (II) LoadModule: "glx"
[ 351.647] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 351.661] (II) Module glx: vendor="NVIDIA Corporation"
[ 351.661] compiled for 4.0.2, module version = 1.0.0
[ 351.661] Module class: X.Org Server Extension
[ 351.661] (II) NVIDIA GLX Module 295.49 Tue May 1 00:09:10 PDT 2012
[ 351.661] (II) Loading extension GLX
[ 351.661] (II) LoadModule: "record"
[ 351.661] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 351.661] (II) Module record: vendor="X.Org Foundation"
[ 351.661] compiled for 1.12.1, module version = 1.13.0
[ 351.661] Module class: X.Org Server Extension
[ 351.661] ABI class: X.Org Server Extension, version 6.0
[ 351.661] (II) Loading extension RECORD
[ 351.661] (II) LoadModule: "dri"
[ 351.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 351.661] (II) Module dri: vendor="X.Org Foundation"
[ 351.661] compiled for 1.12.1, module version = 1.0.0
[ 351.661] ABI class: X.Org Server Extension, version 6.0
[ 351.661] (II) Loading extension XFree86-DRI
[ 351.661] (II) LoadModule: "dri2"
[ 351.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 351.661] (II) Module dri2: vendor="X.Org Foundation"
[ 351.661] compiled for 1.12.1, module version = 1.2.0
[ 351.661] ABI class: X.Org Server Extension, version 6.0
[ 351.661] (II) Loading extension DRI2
[ 351.661] (==) Matched nouveau as autoconfigured driver 0
[ 351.661] (==) Matched nvidia as autoconfigured driver 1
[ 351.661] (==) Matched nv as autoconfigured driver 2
[ 351.661] (==) Matched vesa as autoconfigured driver 3
[ 351.661] (==) Matched fbdev as autoconfigured driver 4
[ 351.661] (==) Assigned the driver to the xf86ConfigLayout
[ 351.661] (II) LoadModule: "nouveau"
[ 351.661] (WW) Warning, couldn't open module nouveau
[ 351.661] (II) UnloadModule: "nouveau"
[ 351.661] (II) Unloading nouveau
[ 351.661] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 351.661] (II) LoadModule: "nvidia"
[ 351.661] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 351.662] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 351.662] compiled for 4.0.2, module version = 1.0.0
[ 351.662] Module class: X.Org Video Driver
[ 351.662] (II) LoadModule: "nv"
[ 351.662] (WW) Warning, couldn't open module nv
[ 351.662] (II) UnloadModule: "nv"
[ 351.662] (II) Unloading nv
[ 351.662] (EE) Failed to load module "nv" (module does not exist, 0)
[ 351.662] (II) LoadModule: "vesa"
[ 351.662] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 351.662] (II) Module vesa: vendor="X.Org Foundation"
[ 351.662] compiled for 1.12.0, module version = 2.3.1
[ 351.662] Module class: X.Org Video Driver
[ 351.662] ABI class: X.Org Video Driver, version 12.0
[ 351.662] (II) LoadModule: "fbdev"
[ 351.663] (WW) Warning, couldn't open module fbdev
[ 351.663] (II) UnloadModule: "fbdev"
[ 351.663] (II) Unloading fbdev
[ 351.663] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 351.663] (II) NVIDIA dlloader X Driver 295.49 Mon Apr 30 23:48:24 PDT 2012
[ 351.663] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 351.663] (II) VESA: driver for VESA chipsets: vesa
[ 351.663] (++) using VT number 8
[ 351.664] (II) Loading sub module "fb"
[ 351.664] (II) LoadModule: "fb"
[ 351.664] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 351.664] (II) Module fb: vendor="X.Org Foundation"
[ 351.664] compiled for 1.12.1, module version = 1.0.0
[ 351.664] ABI class: X.Org ANSI C Emulation, version 0.4
[ 351.664] (II) Loading sub module "wfb"
[ 351.664] (II) LoadModule: "wfb"
[ 351.664] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 351.665] (II) Module wfb: vendor="X.Org Foundation"
[ 351.665] compiled for 1.12.1, module version = 1.0.0
[ 351.665] ABI class: X.Org ANSI C Emulation, version 0.4
[ 351.665] (II) Loading sub module "ramdac"
[ 351.665] (II) LoadModule: "ramdac"
[ 351.665] (II) Module "ramdac" already built-in
[ 351.665] (WW) Falling back to old probe method for vesa
[ 351.665] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 351.665] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 351.665] (==) NVIDIA(0): RGB weight 888
[ 351.665] (==) NVIDIA(0): Default visual is TrueColor
[ 351.665] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 351.665] (**) NVIDIA(0): Enabling 2D acceleration
[ 352.478] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (DFP-0)) does not support NVIDIA
[ 352.478] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 352.482] (II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G86) at PCI:1:0:0 (GPU-0)
[ 352.482] (--) NVIDIA(0): Memory: 524288 kBytes
[ 352.482] (--) NVIDIA(0): VideoBIOS: 60.86.50.00.00
[ 352.482] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 352.482] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 352.488] (--) NVIDIA(0): Connected display device(s) on GeForce 8400 GS at PCI:1:0:0
[ 352.488] (--) NVIDIA(0): LG Electronics W2243 (DFP-0)
[ 352.488] (--) NVIDIA(0): LG Electronics W2243 (DFP-0): 165.0 MHz maximum pixel clock
[ 352.488] (--) NVIDIA(0): LG Electronics W2243 (DFP-0): Internal Single Link TMDS
[ 352.546] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 352.546] (**) NVIDIA(0): device LG Electronics W2243 (DFP-0) (Using EDID
[ 352.546] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 352.605] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 352.605] (==) NVIDIA(0):
[ 352.605] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 352.605] (==) NVIDIA(0): will be used as the requested mode.
[ 352.605] (==) NVIDIA(0):
[ 352.605] (II) NVIDIA(0): Validated modes:
[ 352.605] (II) NVIDIA(0): "nvidia-auto-select"
[ 352.605] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 352.632] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 352.632] (--) NVIDIA(0): option
[ 352.632] (II) UnloadModule: "vesa"
[ 352.632] (II) Unloading vesa
[ 352.632] (--) Depth 24 pixmap format is 32 bpp
[ 352.632] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 352.638] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 352.638] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 352.638] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 352.638] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 352.638] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 352.638] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 352.638] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 352.638] (II) NVIDIA(0): Config Options in the README.
[ 352.644] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 352.684] (II) Loading extension NV-GLX
[ 352.733] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 352.733] (==) NVIDIA(0): Backing store disabled
[ 352.733] (==) NVIDIA(0): Silken mouse enabled
[ 352.734] (==) NVIDIA(0): DPMS enabled
[ 352.734] (II) Loading extension NV-CONTROL
[ 352.735] (II) Loading extension XINERAMA
[ 352.735] (II) Loading sub module "dri2"
[ 352.735] (II) LoadModule: "dri2"
[ 352.735] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 352.735] (II) Module dri2: vendor="X.Org Foundation"
[ 352.735] compiled for 1.12.1, module version = 1.2.0
[ 352.735] ABI class: X.Org Server Extension, version 6.0
[ 352.735] (II) NVIDIA(0): [DRI2] Setup complete
[ 352.735] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 352.735] (==) RandR enabled
[ 352.735] (II) Initializing built-in extension Generic Event Extension
[ 352.735] (II) Initializing built-in extension SHAPE
[ 352.735] (II) Initializing built-in extension MIT-SHM
[ 352.735] (II) Initializing built-in extension XInputExtension
[ 352.735] (II) Initializing built-in extension XTEST
[ 352.735] (II) Initializing built-in extension BIG-REQUESTS
[ 352.735] (II) Initializing built-in extension SYNC
[ 352.735] (II) Initializing built-in extension XKEYBOARD
[ 352.735] (II) Initializing built-in extension XC-MISC
[ 352.735] (II) Initializing built-in extension SECURITY
[ 352.735] (II) Initializing built-in extension XINERAMA
[ 352.735] (II) Initializing built-in extension XFIXES
[ 352.735] (II) Initializing built-in extension RENDER
[ 352.735] (II) Initializing built-in extension RANDR
[ 352.735] (II) Initializing built-in extension COMPOSITE
[ 352.735] (II) Initializing built-in extension DAMAGE
[ 352.736] (II) Initializing extension GLX
[ 352.848] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 352.848] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 352.848] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 352.848] (II) LoadModule: "evdev"
[ 352.848] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 352.848] (II) Module evdev: vendor="X.Org Foundation"
[ 352.848] compiled for 1.12.0, module version = 2.7.0
[ 352.848] Module class: X.Org XInput Driver
[ 352.848] ABI class: X.Org XInput driver, version 16.0
[ 352.848] (II) Using input driver 'evdev' for 'Power Button'
[ 352.848] (**) Power Button: always reports core events
[ 352.848] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 352.848] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 352.848] (--) evdev: Power Button: Found keys
[ 352.848] (II) evdev: Power Button: Configuring as keyboard
[ 352.848] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 352.848] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 352.848] (**) Option "xkb_rules" "evdev"
[ 352.848] (**) Option "xkb_model" "evdev"
[ 352.848] (**) Option "xkb_layout" "us"
[ 352.848] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 352.880] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 352.880] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 352.880] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 352.880] (II) Using input driver 'evdev' for 'Power Button'
[ 352.881] (**) Power Button: always reports core events
[ 352.881] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 352.881] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 352.881] (--) evdev: Power Button: Found keys
[ 352.881] (II) evdev: Power Button: Configuring as keyboard
[ 352.881] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 352.881] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 352.881] (**) Option "xkb_rules" "evdev"
[ 352.881] (**) Option "xkb_model" "evdev"
[ 352.881] (**) Option "xkb_layout" "us"
[ 352.881] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 352.881] (II) config/udev: Adding input device A4Tech Wireless Battery Free Optical Mouse (/dev/input/event1)
[ 352.881] (**) A4Tech Wireless Battery Free Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 352.881] (II) Using input driver 'evdev' for 'A4Tech Wireless Battery Free Optical Mouse'
[ 352.881] (**) A4Tech Wireless Battery Free Optical Mouse: always reports core events
[ 352.881] (**) evdev: A4Tech Wireless Battery Free Optical Mouse: Device: "/dev/input/event1"
[ 352.881] (--) evdev: A4Tech Wireless Battery Free Optical Mouse: Vendor 0x9da Product 0x22b
[ 352.881] (--) evdev: A4Tech Wireless Battery Free Optical Mouse: Found 12 mouse buttons
[ 352.881] (--) evdev: A4Tech Wireless Battery Free Optical Mouse: Found scroll wheel(s)
[ 352.881] (--) evdev: A4Tech Wireless Battery Free Optical Mouse: Found relative axes
[ 352.881] (--) evdev: A4Tech Wireless Battery Free Optical Mouse: Found x and y relative axes
[ 352.881] (II) evdev: A4Tech Wireless Battery Free Optical Mouse: Configuring as mouse
[ 352.881] (II) evdev: A4Tech Wireless Battery Free Optical Mouse: Adding scrollwheel support
[ 352.881] (**) evdev: A4Tech Wireless Battery Free Optical Mouse: YAxisMapping: buttons 4 and 5
[ 352.881] (**) evdev: A4Tech Wireless Battery Free Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 352.881] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input1/event1"
[ 352.881] (II) XINPUT: Adding extended input device "A4Tech Wireless Battery Free Optical Mouse" (type: MOUSE, id 8)
[ 352.881] (II) evdev: A4Tech Wireless Battery Free Optical Mouse: initialized for relative axes.
[ 352.882] (**) A4Tech Wireless Battery Free Optical Mouse: (accel) keeping acceleration scheme 1
[ 352.882] (**) A4Tech Wireless Battery Free Optical Mouse: (accel) acceleration profile 0
[ 352.882] (**) A4Tech Wireless Battery Free Optical Mouse: (accel) acceleration factor: 2.000
[ 352.882] (**) A4Tech Wireless Battery Free Optical Mouse: (accel) acceleration threshold: 4
[ 352.882] (II) config/udev: Adding input device A4Tech Wireless Battery Free Optical Mouse (/dev/input/mouse0)
[ 352.882] (II) No input driver specified, ignoring this device.
[ 352.882] (II) This device may have been added with another device file.
[ 352.882] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 352.882] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 352.882] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 352.882] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 352.882] (**) AT Translated Set 2 keyboard: always reports core events
[ 352.882] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 352.882] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 352.882] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 352.882] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 352.882] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 352.882] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 352.882] (**) Option "xkb_rules" "evdev"
[ 352.882] (**) Option "xkb_model" "evdev"
[ 352.882] (**) Option "xkb_layout" "us"
[ 352.882] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 352.883] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 352.883] (II) No input driver specified, ignoring this device.
[ 352.883] (II) This device may have been added with another device file.
[ 385.684] (EE) NVIDIA(0): Error recovery failed.
[ 385.684] (EE) NVIDIA(0): *** Aborting ***
at this point gdm login appears
just blender (no firefox) opened and at closed:
[ 592.615] [mi] Increasing EQ size to 512 to prevent dropped events.
[ 620.945] (EE) NVIDIA(0): Error recovery failed.
[ 620.945] (EE) NVIDIA(0): *** Aborting ***
starting with regular kernel, while opening firefox I get:
[ 204.463] [mi] EQ overflowing. Additional events will be discarded until existing events are processed.
[ 204.463]
[ 204.463] Backtrace:
[ 204.480] 0: /usr/bin/Xorg (xorg_backtrace+0x36) [0x55f646]
[ 204.480] 1: /usr/bin/Xorg (mieqEnqueue+0x26b) [0x54099b]
[ 204.480] 2: /usr/bin/Xorg (0x400000+0x47f62) [0x447f62]
[ 204.480] 3: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f5b81483000+0x5478) [0x7f5b81488478]
[ 204.480] 4: /usr/bin/Xorg (0x400000+0x6eab7) [0x46eab7]
[ 204.480] 5: /usr/bin/Xorg (0x400000+0x92d40) [0x492d40]
[ 204.480] 6: /lib/libpthread.so.0 (0x7f5b88516000+0xf140) [0x7f5b88525140]
[ 204.480] 7: (vdso) (__vdso_gettimeofday+0x13) [0x7fff19942a43]
[ 204.480] 8: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0x8fb25) [0x7f5b82200b25]
[ 204.480] 9: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0xfa8c3) [0x7f5b8226b8c3]
[ 204.480] 10: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0xc4a52) [0x7f5b82235a52]
[ 204.480] 11: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0x53524c) [0x7f5b826a624c]
[ 204.480] 12: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0x5032ec) [0x7f5b826742ec]
[ 204.480] 13: /usr/bin/Xorg (0x400000+0xedd10) [0x4edd10]
[ 204.480] 14: /usr/bin/Xorg (BlockHandler+0x4a) [0x43821a]
[ 204.480] 15: /usr/bin/Xorg (WaitForSomething+0x11c) [0x55ca2c]
[ 204.481] 16: /usr/bin/Xorg (0x400000+0x341b1) [0x4341b1]
[ 204.481] 17: /usr/bin/Xorg (0x400000+0x23535) [0x423535]
[ 204.481] 18: /lib/libc.so.6 (__libc_start_main+0xf5) [0x7f5b873cb455]
[ 204.481] 19: /usr/bin/Xorg (0x400000+0x2380d) [0x42380d]
[ 204.481]
[ 204.481] [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
[ 204.481] [mi] mieq is *NOT* the cause. It is a victim.
[ 206.287] (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x00004024, 0x0000612c)
[ 207.288] (WW) NVIDIA(0): WAIT (0, 6, 0x8000, 0x0000612c, 0x0000612c)
[ 207.288] [mi] Increasing EQ size to 512 to prevent dropped events.
[ 207.288] [mi] EQ processing has resumed after 79 dropped events.
[ 207.288] [mi] This may be caused my a misbehaving driver monopolizing the server's resources.
when closing blender (firefox opened)
[ 635.056] [mi] EQ overflowing. Additional events will be discarded until existing events are processed.
[ 635.056]
[ 635.056] Backtrace:
[ 635.056] 0: /usr/bin/Xorg (xorg_backtrace+0x36) [0x55f646]
[ 635.056] 1: /usr/bin/Xorg (mieqEnqueue+0x26b) [0x54099b]
[ 635.056] 2: /usr/bin/Xorg (0x400000+0x47f62) [0x447f62]
[ 635.056] 3: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f5b81483000+0x5478) [0x7f5b81488478]
[ 635.056] 4: /usr/bin/Xorg (0x400000+0x6eab7) [0x46eab7]
[ 635.056] 5: /usr/bin/Xorg (0x400000+0x92d40) [0x492d40]
[ 635.056] 6: /lib/libpthread.so.0 (0x7f5b88516000+0xf140) [0x7f5b88525140]
[ 635.056] 7: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0x8f080) [0x7f5b82200080]
[ 635.056] 8: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0x90c35) [0x7f5b82201c35]
[ 635.056] 9: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0xfe25b) [0x7f5b8226f25b]
[ 635.056] 10: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0x5376f0) [0x7f5b826a86f0]
[ 635.056] 11: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0x536175) [0x7f5b826a7175]
[ 635.056] 12: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0x53792d) [0x7f5b826a892d]
[ 635.056] 13: /usr/bin/Xorg (0x400000+0xf4f82) [0x4f4f82]
[ 635.056] 14: /usr/bin/Xorg (0x400000+0x310f3) [0x4310f3]
[ 635.056] 15: /usr/bin/Xorg (0x400000+0x34472) [0x434472]
[ 635.056] 16: /usr/bin/Xorg (0x400000+0x23535) [0x423535]
[ 635.056] 17: /lib/libc.so.6 (__libc_start_main+0xf5) [0x7f5b873cb455]
[ 635.056] 18: /usr/bin/Xorg (0x400000+0x2380d) [0x42380d]
[ 635.056]
[ 635.056] [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
[ 635.056] [mi] mieq is *NOT* the cause. It is a victim.
[ 635.464] [mi] EQ overflow continuing. 100 events have been dropped.
[ 635.464]
[ 635.464] Backtrace:
[ 635.464] 0: /usr/bin/Xorg (xorg_backtrace+0x36) [0x55f646]
[ 635.464] 1: /usr/bin/Xorg (0x400000+0x47f62) [0x447f62]
[ 635.464] 2: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f5b81483000+0x5478) [0x7f5b81488478]
[ 635.464] 3: /usr/bin/Xorg (0x400000+0x6eab7) [0x46eab7]
[ 635.464] 4: /usr/bin/Xorg (0x400000+0x92d40) [0x492d40]
[ 635.464] 5: /lib/libpthread.so.0 (0x7f5b88516000+0xf140) [0x7f5b88525140]
[ 635.464] 6: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0x8f080) [0x7f5b82200080]
[ 635.464] 7: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0x90c35) [0x7f5b82201c35]
[ 635.464] 8: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0xfe25b) [0x7f5b8226f25b]
[ 635.464] 9: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0x5376f0) [0x7f5b826a86f0]
[ 635.464] 10: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0x536175) [0x7f5b826a7175]
[ 635.464] 11: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7f5b82171000+0x53792d) [0x7f5b826a892d]
[ 635.464] 12: /usr/bin/Xorg (0x400000+0xf4f82) [0x4f4f82]
[ 635.464] 13: /usr/bin/Xorg (0x400000+0x310f3) [0x4310f3]
[ 635.464] 14: /usr/bin/Xorg (0x400000+0x34472) [0x434472]
[ 635.464] 15: /usr/bin/Xorg (0x400000+0x23535) [0x423535]
[ 635.464] 16: /lib/libc.so.6 (__libc_start_main+0xf5) [0x7f5b873cb455]
[ 635.464] 17: /usr/bin/Xorg (0x400000+0x2380d) [0x42380d]
[ 635.464]
[ 636.107] [mi] Increasing EQ size to 1024 to prevent dropped events.
[ 636.108] [mi] EQ processing has resumed after 107 dropped events.
[ 636.108] [mi] This may be caused my a misbehaving driver monopolizing the server's resources.
[ 664.403] (EE) NVIDIA(0): Error recovery failed.
[ 664.403] (EE) NVIDIA(0): *** Aborting ***
thanks again for any directions!
Last edited by matiasm (2012-05-12 22:13:47)thisoldman wrote:Please edit your post and surround the log output with the bbs tags [code] and [/code]. It makes it easier for others to review and to scroll to the replies.
Thanks for that!
OK, I've made some progress, or actually "regresions"
I've found this topic https://bbs.archlinux.org/post.php?tid=136030 where the workaround is downgrading to nvidia-285.xx
I had to try a couple of combinations and finally made nividia-285work, sort of . The issue while closing blender seems to have gone, but I messed something with xorg or gnome since I'm getting an error in gdm login (i'm trying to find out the error) and the all windows decorations are gone. And had a complete crash once (reset button only option)
will keep on searching...
update:
this combination seems to work!
nvidia 285.05.09-3
linux 3.1.9-2
xorg-server 1.10.4-1
xf86-input-evdev 2.6.0-3
Last edited by matiasm (2012-05-13 02:20:15) -
Every time I install my new Geforce 4 detonator 30.82 drivers' it always shows two monitors on the settings page of my display properties. One is my monitor the other is called default. It also tries to show this default monitor in device manager until I delete it a couple of times but it always stays in the settings page. Is this normal.
Jake777,
That is because your Video Card is a Dual Dead card. It says you have a Default monitor on the second head because you do not have a monitor and Win XP cannot detect it so it defaults to, you guessed it, Default.
You can try the latest Detonator 4 drivers from nVidia, I do not believe they will show the second monitor.
Take Care,
Richard -
HP C410 and monitor problem when open online site.
When I open my HP C410 in the on line site, the color on my monitor gets funky and in turn the color on my home screen is also skewed. This only happens when I bring up this software. I've looked for places to change color and intensity within the program for the monitor, but don't see anything. This distorts so much that I can't read the pages that I scan in. This changed in the last couple months and is driving me nuts.
Hello @Anita46,
Welcome to the HP Support Forums!
I understand that you're experiencing issues when viewing your HP Photosmart Premium Fax e-All-in-One C410 Printer on the on line site on your Windows XP computer. I would like to assist you today with resolving this issue. However, I do need to clarify a few things before I am able to provide you with accurate troubleshooting.
1. Are you able to Copy successfully?
If you're not sure, please click here for instructions on how to Copy. I would like you to perform a Colour Copy to see if the quality comes out distorted.
If your Colour Copy prints perfectly than can I have you elaborate on exactly what occurs when you scan a document into your computer?
2. When your monitor appears distorted, I need you to elaborate on what you mean by it occuring on the Photosmart C410 site?
I need to confirm exactly what is occuring as a distorted monitor colours issues is significantly different than a Photosmart C410 scan issue. Once I confirm exactly what is occuring I will be able to guide you towards the correct resolution. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping! -
Nvidia problems: Xorg flickering and restarts
Hi,
after upgrading my laptop which has a nVidia Quadro FX1800 built-in (G94 / GT215GLM chipset I believe) I ran into problems over problems.
The latest nvidia drivers no longer support my card, so I installed the nvidia-340xx series packages (core driver, -libgl, -utils, lib32 variants).
After restarting I noticed the nvidia logo showing up 2 or 3 times, but then finally started up.
Everytime the screen changes I got a lot of flickering (screen going black for fractions of a second) and after a few seconds I was back at the nvidia logo - the X session just restarted.
My next attempt fixing this was going to linux-lts, which I installed together with nvidia-304xx-lts. After a reboot I thought that fixed the problem, but after half a minute I experienced the same bullsh** behaviour again.
The issue is extremely bad, starting xterm and running dmesg immediately leads to a Xorg restart, nautilus lives for about a minute, firefox won't even start.
The machine is absolutely unusable.
The problem occurs with linux 3.17(.3) as well as 3.14(.25) lts.
The X logs don't show any errors/problems, but dmesg reveals something's definitely broken here:
[ 313.533019] pcieport 0000:00:03.0: AER: Uncorrected (Non-Fatal) error received: id=0018
[ 313.533030] pcieport 0000:00:03.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0018(Requester ID)
[ 313.533034] pcieport 0000:00:03.0: device [8086:d138] error status/mask=00004000/00000000
[ 313.533037] pcieport 0000:00:03.0: [14] Completion Timeout (First)
[ 313.533042] pcieport 0000:00:03.0: broadcast error_detected message
[ 313.533045] pcieport 0000:00:03.0: AER: Device recovery failed
[ 313.535202] pcieport 0000:00:03.0: AER: Uncorrected (Non-Fatal) error received: id=0018
[ 313.535215] pcieport 0000:00:03.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0018(Requester ID)
[ 313.535218] pcieport 0000:00:03.0: device [8086:d138] error status/mask=00004000/00000000
[ 313.535220] pcieport 0000:00:03.0: [14] Completion Timeout (First)
[ 313.535225] pcieport 0000:00:03.0: broadcast error_detected message
[ 313.535227] pcieport 0000:00:03.0: AER: Device recovery failed
[ 313.537431] pcieport 0000:00:03.0: AER: Uncorrected (Non-Fatal) error received: id=0018
[ 313.537440] pcieport 0000:00:03.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0018(Requester ID)
[ 313.537443] pcieport 0000:00:03.0: device [8086:d138] error status/mask=00004000/00000000
[ 313.537447] pcieport 0000:00:03.0: [14] Completion Timeout (First)
[ 313.537451] pcieport 0000:00:03.0: broadcast error_detected message
[ 313.537454] pcieport 0000:00:03.0: AER: Device recovery failed
[ 313.539615] pcieport 0000:00:03.0: AER: Uncorrected (Non-Fatal) error received: id=0018
[ 313.539623] pcieport 0000:00:03.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0018(Requester ID)
[ 313.539626] pcieport 0000:00:03.0: device [8086:d138] error status/mask=00004000/00000000
[ 313.539628] pcieport 0000:00:03.0: [14] Completion Timeout (First)
[ 313.539633] pcieport 0000:00:03.0: broadcast error_detected message
[ 313.539635] pcieport 0000:00:03.0: AER: Device recovery failed
[ 323.308264] pcieport 0000:00:03.0: AER: Uncorrected (Non-Fatal) error received: id=0018
[ 323.308278] pcieport 0000:00:03.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0018(Requester ID)
[ 323.308286] pcieport 0000:00:03.0: device [8086:d138] error status/mask=00004000/00000000
[ 323.308292] pcieport 0000:00:03.0: [14] Completion Timeout (First)
[ 323.308300] pcieport 0000:00:03.0: broadcast error_detected message
[ 323.308305] pcieport 0000:00:03.0: AER: Device recovery failed
[ 323.308311] pcieport 0000:00:03.0: AER: Uncorrected (Non-Fatal) error received: id=0018
[ 323.310458] pcieport 0000:00:03.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0018(Requester ID)
[ 323.312667] pcieport 0000:00:03.0: device [8086:d138] error status/mask=00004000/00000000
[ 323.312673] pcieport 0000:00:03.0: [14] Completion Timeout (First)
[ 323.312685] pcieport 0000:00:03.0: broadcast error_detected message
[ 323.312689] pcieport 0000:00:03.0: AER: Device recovery failed
[ 323.312695] pcieport 0000:00:03.0: AER: Uncorrected (Non-Fatal) error received: id=0018
[ 323.314835] pcieport 0000:00:03.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0018(Requester ID)
[ 323.314851] pcieport 0000:00:03.0: device [8086:d138] error status/mask=00004000/00000000
[ 323.314854] pcieport 0000:00:03.0: [14] Completion Timeout (First)
[ 323.314863] pcieport 0000:00:03.0: broadcast error_detected message
[ 323.314866] pcieport 0000:00:03.0: AER: Device recovery failed
[ 323.314870] pcieport 0000:00:03.0: AER: Uncorrected (Non-Fatal) error received: id=0018
[ 323.314881] pcieport 0000:00:03.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0018(Requester ID)
[ 323.314885] pcieport 0000:00:03.0: device [8086:d138] error status/mask=00004000/00000000
[ 323.314889] pcieport 0000:00:03.0: [14] Completion Timeout (First)
[ 323.314895] pcieport 0000:00:03.0: broadcast error_detected message
[ 323.314898] pcieport 0000:00:03.0: AER: Device recovery failed
[ 323.314902] pcieport 0000:00:03.0: AER: Uncorrected (Non-Fatal) error received: id=0018
[ 323.314910] pcieport 0000:00:03.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0018(Requester ID)
[ 323.314913] pcieport 0000:00:03.0: device [8086:d138] error status/mask=00004000/00000000
[ 323.329276] pcieport 0000:00:03.0: [14] Completion Timeout (First)
[ 323.329282] pcieport 0000:00:03.0: broadcast error_detected message
[ 323.329286] pcieport 0000:00:03.0: AER: Device recovery failed
[ 323.330412] NVRM: GPU at PCI:0000:01:00: GPU-d6f5433d-0c4d-5d1a-c65b-019c8959750d
[ 323.330419] NVRM: Xid (PCI:0000:01:00): 6, PE0001
[ 326.017927] nvidia 0000:01:00.0: irq 63 for MSI/MSI-X
[ 326.020203] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 326.020257] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 326.020292] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 326.020534] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 326.020569] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 326.020603] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 326.020637] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 326.020672] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 326.022316] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 326.022531] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
lspci reveals that the PCI device at 0000:00:03.0 is the nvidia card.
What can I do to fix the problem?
Does anyone have experience with nouveau on a Quadro FX1800? What can I expect to work, what not and how's the performance?
I'm so glad I got a Haswell with Intel graphics for my Desktop right now...
I desperately hope anyone here can help me sort this out.At the very beginning I thought it's just 340xx issue (there are already some threads here on forum or this on devtalk: https://devtalk.nvidia.com/default/topi … x-ubunt/2/) but it's really strange you have problems with 304xx - according to 304 Supported Devices your FX1800 should be handled fine.this Supported Devices section.
After splitting to nvidia and nvidia-340xx I had to downgrade to nvidia-304xx - because of monitor detection issues I couldn't use version 340 (Quadro NVS 140M).
Some solution is available here: https://bbs.archlinux.org/viewtopic.php … 7#p1478277
Last edited by jakub (2014-11-26 13:05:38) -
Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks. -
[SOLVED] nvidia and xorg-server, slow start compared to nv
I've seen many similar topics but none that have been solved, therefore the new topic.
Starting xorg with nv driver takes just a few seconds to desktop, while using nvidia takes almost 10 seconds more to get to desktop. Although after reaching desktop everything works fine. I've used a minimal xorg.conf for each driver (replacing nvidia with nv):
Section "Device"
Identifier "Device0"
Driver "nvidia"
EndSection
The /var/log/Xorg.0.log when using nvidia:
[ 22.779]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 22.779] X Protocol Version 11, Revision 0
[ 22.779] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 22.779] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
[ 22.779] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
[ 22.779] Build Date: 30 May 2012 07:24:13PM
[ 22.779]
[ 22.779] Current version of pixman: 0.26.0
[ 22.779] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.779] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.779] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:37:16 2012
[ 22.844] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.844] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.106] (==) No Layout section. Using the first Screen section.
[ 23.106] (==) No screen section available. Using defaults.
[ 23.106] (**) |-->Screen "Default Screen Section" (0)
[ 23.106] (**) | |-->Monitor "<default monitor>"
[ 23.106] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 23.106] (**) | |-->Device "Device0"
[ 23.106] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.106] (==) Automatically adding devices
[ 23.106] (==) Automatically enabling devices
[ 23.219] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 23.219] Entry deleted from font path.
[ 23.414] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 23.414] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.414] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.414] (II) Loader magic: 0x7c58e0
[ 23.414] (II) Module ABI versions:
[ 23.414] X.Org ANSI C Emulation: 0.4
[ 23.414] X.Org Video Driver: 12.0
[ 23.414] X.Org XInput driver : 16.0
[ 23.414] X.Org Server Extension : 6.0
[ 23.415] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 23.415] (II) Open ACPI successful (/var/run/acpid.socket)
[ 23.415] (II) LoadModule: "extmod"
[ 23.453] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.487] (II) Module extmod: vendor="X.Org Foundation"
[ 23.487] compiled for 1.12.2, module version = 1.0.0
[ 23.487] Module class: X.Org Server Extension
[ 23.487] ABI class: X.Org Server Extension, version 6.0
[ 23.487] (II) Loading extension MIT-SCREEN-SAVER
[ 23.487] (II) Loading extension XFree86-VidModeExtension
[ 23.487] (II) Loading extension XFree86-DGA
[ 23.487] (II) Loading extension DPMS
[ 23.487] (II) Loading extension XVideo
[ 23.487] (II) Loading extension XVideo-MotionCompensation
[ 23.487] (II) Loading extension X-Resource
[ 23.487] (II) LoadModule: "dbe"
[ 23.487] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.512] (II) Module dbe: vendor="X.Org Foundation"
[ 23.512] compiled for 1.12.2, module version = 1.0.0
[ 23.512] Module class: X.Org Server Extension
[ 23.512] ABI class: X.Org Server Extension, version 6.0
[ 23.512] (II) Loading extension DOUBLE-BUFFER
[ 23.512] (II) LoadModule: "glx"
[ 23.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.824] (II) Module glx: vendor="NVIDIA Corporation"
[ 26.868] compiled for 4.0.2, module version = 1.0.0
[ 26.868] Module class: X.Org Server Extension
[ 26.868] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
[ 26.869] (II) Loading extension GLX
[ 26.869] (II) LoadModule: "record"
[ 26.869] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 26.941] (II) Module record: vendor="X.Org Foundation"
[ 26.941] compiled for 1.12.2, module version = 1.13.0
[ 26.941] Module class: X.Org Server Extension
[ 26.941] ABI class: X.Org Server Extension, version 6.0
[ 26.941] (II) Loading extension RECORD
[ 26.941] (II) LoadModule: "dri"
[ 26.941] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 27.011] (II) Module dri: vendor="X.Org Foundation"
[ 27.011] compiled for 1.12.2, module version = 1.0.0
[ 27.011] ABI class: X.Org Server Extension, version 6.0
[ 27.011] (II) Loading extension XFree86-DRI
[ 27.011] (II) LoadModule: "dri2"
[ 27.011] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 27.046] (II) Module dri2: vendor="X.Org Foundation"
[ 27.047] compiled for 1.12.2, module version = 1.2.0
[ 27.047] ABI class: X.Org Server Extension, version 6.0
[ 27.047] (II) Loading extension DRI2
[ 27.047] (II) LoadModule: "nvidia"
[ 27.122] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 27.306] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 27.306] compiled for 4.0.2, module version = 1.0.0
[ 27.306] Module class: X.Org Video Driver
[ 27.608] (II) NVIDIA dlloader X Driver 295.53 Fri May 11 23:29:56 PDT 2012
[ 27.608] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 27.617] (++) using VT number 7
[ 27.678] (II) Loading sub module "fb"
[ 27.678] (II) LoadModule: "fb"
[ 27.850] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.870] (II) Module fb: vendor="X.Org Foundation"
[ 27.870] compiled for 1.12.2, module version = 1.0.0
[ 27.870] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.870] (II) Loading sub module "wfb"
[ 27.870] (II) LoadModule: "wfb"
[ 27.871] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 27.879] (II) Module wfb: vendor="X.Org Foundation"
[ 27.879] compiled for 1.12.2, module version = 1.0.0
[ 27.879] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.879] (II) Loading sub module "ramdac"
[ 27.879] (II) LoadModule: "ramdac"
[ 27.879] (II) Module "ramdac" already built-in
[ 27.934] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 27.934] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 27.934] (==) NVIDIA(0): RGB weight 888
[ 27.934] (==) NVIDIA(0): Default visual is TrueColor
[ 27.934] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.935] (**) NVIDIA(0): Enabling 2D acceleration
[ 29.873] (II) NVIDIA(GPU-0): Display (Chi Mei Optoelectronics corp. (DFP-0)) does not
[ 29.873] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 30.786] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:2:0:0 (GPU-0)
[ 30.786] (--) NVIDIA(0): Memory: 524288 kBytes
[ 30.786] (--) NVIDIA(0): VideoBIOS: 70.18.53.00.ff
[ 30.786] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 30.786] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 30.789] (--) NVIDIA(0): Connected display device(s) on GeForce 310M at PCI:2:0:0
[ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0)
[ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel
[ 30.789] (--) NVIDIA(0): clock
[ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal Dual Link
[ 30.789] (--) NVIDIA(0): LVDS
[ 30.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 30.789] (**) NVIDIA(0): device Chi Mei Optoelectronics corp. (DFP-0) (Using EDID
[ 30.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 30.836] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 30.836] (==) NVIDIA(0):
[ 30.836] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 30.836] (==) NVIDIA(0): will be used as the requested mode.
[ 30.836] (==) NVIDIA(0):
[ 30.836] (II) NVIDIA(0): Validated modes:
[ 30.836] (II) NVIDIA(0): "nvidia-auto-select"
[ 30.836] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[ 31.892] (--) NVIDIA(0): DPI set to (99, 102); computed from "UseEdidDpi" X config
[ 31.892] (--) NVIDIA(0): option
[ 31.892] (--) Depth 24 pixmap format is 32 bpp
[ 31.892] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 31.900] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 34.862] (II) Loading extension NV-GLX
[ 37.299] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 37.299] (==) NVIDIA(0): Backing store disabled
[ 37.299] (==) NVIDIA(0): Silken mouse enabled
[ 37.300] (==) NVIDIA(0): DPMS enabled
[ 37.300] (II) Loading extension NV-CONTROL
[ 37.300] (II) Loading extension XINERAMA
[ 37.300] (II) Loading sub module "dri2"
[ 37.300] (II) LoadModule: "dri2"
[ 37.300] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 37.300] (II) Module dri2: vendor="X.Org Foundation"
[ 37.300] compiled for 1.12.2, module version = 1.2.0
[ 37.300] ABI class: X.Org Server Extension, version 6.0
[ 37.300] (II) NVIDIA(0): [DRI2] Setup complete
[ 37.300] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 37.301] (==) RandR enabled
[ 37.301] (II) Initializing built-in extension Generic Event Extension
[ 37.301] (II) Initializing built-in extension SHAPE
[ 37.301] (II) Initializing built-in extension MIT-SHM
[ 37.301] (II) Initializing built-in extension XInputExtension
[ 37.301] (II) Initializing built-in extension XTEST
[ 37.301] (II) Initializing built-in extension BIG-REQUESTS
[ 37.301] (II) Initializing built-in extension SYNC
[ 37.301] (II) Initializing built-in extension XKEYBOARD
[ 37.301] (II) Initializing built-in extension XC-MISC
[ 37.301] (II) Initializing built-in extension SECURITY
[ 37.301] (II) Initializing built-in extension XINERAMA
[ 37.301] (II) Initializing built-in extension XFIXES
[ 37.301] (II) Initializing built-in extension RENDER
[ 37.301] (II) Initializing built-in extension RANDR
[ 37.301] (II) Initializing built-in extension COMPOSITE
[ 37.301] (II) Initializing built-in extension DAMAGE
[ 37.302] (II) Initializing extension GLX
[ 38.717] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 38.717] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 38.717] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 38.717] (II) LoadModule: "evdev"
[ 38.717] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.769] (II) Module evdev: vendor="X.Org Foundation"
[ 38.769] compiled for 1.12.0, module version = 2.7.0
[ 38.769] Module class: X.Org XInput Driver
[ 38.769] ABI class: X.Org XInput driver, version 16.0
[ 38.769] (II) Using input driver 'evdev' for 'Power Button'
[ 38.769] (**) Power Button: always reports core events
[ 38.769] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 38.769] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 38.769] (--) evdev: Power Button: Found keys
[ 38.769] (II) evdev: Power Button: Configuring as keyboard
[ 38.769] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 38.769] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 38.769] (**) Option "xkb_rules" "evdev"
[ 38.769] (**) Option "xkb_model" "evdev"
[ 38.769] (**) Option "xkb_layout" "se"
[ 38.835] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 38.835] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 38.835] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 38.835] (II) Using input driver 'evdev' for 'Video Bus'
[ 38.835] (**) Video Bus: always reports core events
[ 38.835] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 38.835] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 38.835] (--) evdev: Video Bus: Found keys
[ 38.835] (II) evdev: Video Bus: Configuring as keyboard
[ 38.835] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
[ 38.835] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 38.836] (**) Option "xkb_rules" "evdev"
[ 38.836] (**) Option "xkb_model" "evdev"
[ 38.836] (**) Option "xkb_layout" "se"
[ 38.837] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 38.837] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 38.837] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 38.837] (II) Using input driver 'evdev' for 'Power Button'
[ 38.837] (**) Power Button: always reports core events
[ 38.837] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 38.837] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 38.837] (--) evdev: Power Button: Found keys
[ 38.837] (II) evdev: Power Button: Configuring as keyboard
[ 38.837] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 38.837] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 38.837] (**) Option "xkb_rules" "evdev"
[ 38.837] (**) Option "xkb_model" "evdev"
[ 38.837] (**) Option "xkb_layout" "se"
[ 38.838] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 38.838] (II) No input driver specified, ignoring this device.
[ 38.838] (II) This device may have been added with another device file.
[ 38.838] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 38.838] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 38.838] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 38.838] (II) Using input driver 'evdev' for 'Sleep Button'
[ 38.838] (**) Sleep Button: always reports core events
[ 38.838] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[ 38.839] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 38.839] (--) evdev: Sleep Button: Found keys
[ 38.839] (II) evdev: Sleep Button: Configuring as keyboard
[ 38.839] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
[ 38.839] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 38.839] (**) Option "xkb_rules" "evdev"
[ 38.839] (**) Option "xkb_model" "evdev"
[ 38.839] (**) Option "xkb_layout" "se"
[ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[ 38.840] (II) No input driver specified, ignoring this device.
[ 38.840] (II) This device may have been added with another device file.
[ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 38.840] (II) No input driver specified, ignoring this device.
[ 38.840] (II) This device may have been added with another device file.
[ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 38.841] (II) No input driver specified, ignoring this device.
[ 38.841] (II) This device may have been added with another device file.
[ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 38.841] (II) No input driver specified, ignoring this device.
[ 38.841] (II) This device may have been added with another device file.
[ 38.842] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 38.842] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 38.842] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 38.842] (**) Logitech USB Receiver: always reports core events
[ 38.842] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 38.842] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 38.842] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 38.842] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 38.842] (--) evdev: Logitech USB Receiver: Found relative axes
[ 38.842] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 38.842] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 38.842] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 38.842] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 38.842] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 38.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[ 38.842] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 38.843] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 38.843] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 38.843] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 38.843] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 38.843] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 38.844] (II) No input driver specified, ignoring this device.
[ 38.844] (II) This device may have been added with another device file.
[ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 38.844] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 38.844] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
[ 38.844] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 38.844] (**) Logitech USB Receiver: always reports core events
[ 38.844] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 38.844] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 38.844] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 38.844] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 38.845] (--) evdev: Logitech USB Receiver: Found relative axes
[ 38.845] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 38.845] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 38.845] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 38.845] (--) evdev: Logitech USB Receiver: Found keys
[ 38.845] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 38.845] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 38.845] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 38.845] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 38.845] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 38.845] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
[ 38.845] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 38.845] (**) Option "xkb_rules" "evdev"
[ 38.845] (**) Option "xkb_model" "evdev"
[ 38.845] (**) Option "xkb_layout" "se"
[ 38.845] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 38.845] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 38.846] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 38.846] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 38.846] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 38.846] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 38.846] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
[ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
[ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
[ 38.846] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
[ 38.846] (**) USB 2.0 PC Camera: always reports core events
[ 38.846] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
[ 38.846] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
[ 38.846] (--) evdev: USB 2.0 PC Camera: Found keys
[ 38.846] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
[ 38.846] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[ 38.846] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
[ 38.846] (**) Option "xkb_rules" "evdev"
[ 38.846] (**) Option "xkb_model" "evdev"
[ 38.847] (**) Option "xkb_layout" "se"
[ 38.847] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[ 38.847] (II) No input driver specified, ignoring this device.
[ 38.847] (II) This device may have been added with another device file.
[ 38.847] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[ 38.847] (II) No input driver specified, ignoring this device.
[ 38.847] (II) This device may have been added with another device file.
[ 38.847] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 38.847] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 38.847] (**) AT Translated Set 2 keyboard: always reports core events
[ 38.847] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 38.847] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 38.847] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 38.847] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 38.848] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 38.848] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 38.848] (**) Option "xkb_rules" "evdev"
[ 38.848] (**) Option "xkb_model" "evdev"
[ 38.848] (**) Option "xkb_layout" "se"
[ 38.848] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 38.848] (II) LoadModule: "synaptics"
[ 38.848] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 38.911] (II) Module synaptics: vendor="X.Org Foundation"
[ 38.911] compiled for 1.12.1, module version = 1.6.1
[ 38.911] Module class: X.Org XInput Driver
[ 38.911] ABI class: X.Org XInput driver, version 16.0
[ 38.911] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 38.911] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 38.911] (**) Option "Device" "/dev/input/event9"
[ 38.911] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 38.911] (**) Option "TapButton1" "1"
[ 38.911] (**) Option "TapButton2" "2"
[ 38.911] (**) Option "TapButton3" "3"
[ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 38.912] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 38.912] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 38.912] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 38.913] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 38.913] (II) No input driver specified, ignoring this device.
[ 38.913] (II) This device may have been added with another device file.
[ 38.913] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 38.913] (II) No input driver specified, ignoring this device.
[ 38.913] (II) This device may have been added with another device file.
The /var/log/Xorg.0.log when using nv:
[ 52.162]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 52.163] X Protocol Version 11, Revision 0
[ 52.163] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 52.164] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
[ 52.164] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
[ 52.165] Build Date: 30 May 2012 07:24:13PM
[ 52.165]
[ 52.165] Current version of pixman: 0.26.0
[ 52.166] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 52.166] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 52.168] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:30:26 2012
[ 52.168] (==) Using config file: "/etc/X11/xorg.conf"
[ 52.168] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 52.168] (==) No Layout section. Using the first Screen section.
[ 52.168] (==) No screen section available. Using defaults.
[ 52.168] (**) |-->Screen "Default Screen Section" (0)
[ 52.168] (**) | |-->Monitor "<default monitor>"
[ 52.168] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 52.168] (**) | |-->Device "Device0"
[ 52.168] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 52.169] (==) Automatically adding devices
[ 52.169] (==) Automatically enabling devices
[ 52.169] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 52.169] Entry deleted from font path.
[ 52.169] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 52.169] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 52.169] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 52.169] (II) Loader magic: 0x7c58e0
[ 52.169] (II) Module ABI versions:
[ 52.169] X.Org ANSI C Emulation: 0.4
[ 52.169] X.Org Video Driver: 12.0
[ 52.169] X.Org XInput driver : 16.0
[ 52.169] X.Org Server Extension : 6.0
[ 52.169] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 52.170] (II) Open ACPI successful (/var/run/acpid.socket)
[ 52.170] (II) LoadModule: "extmod"
[ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 52.170] (II) Module extmod: vendor="X.Org Foundation"
[ 52.170] compiled for 1.12.2, module version = 1.0.0
[ 52.170] Module class: X.Org Server Extension
[ 52.170] ABI class: X.Org Server Extension, version 6.0
[ 52.170] (II) Loading extension MIT-SCREEN-SAVER
[ 52.170] (II) Loading extension XFree86-VidModeExtension
[ 52.170] (II) Loading extension XFree86-DGA
[ 52.170] (II) Loading extension DPMS
[ 52.170] (II) Loading extension XVideo
[ 52.170] (II) Loading extension XVideo-MotionCompensation
[ 52.170] (II) Loading extension X-Resource
[ 52.170] (II) LoadModule: "dbe"
[ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 52.170] (II) Module dbe: vendor="X.Org Foundation"
[ 52.170] compiled for 1.12.2, module version = 1.0.0
[ 52.170] Module class: X.Org Server Extension
[ 52.170] ABI class: X.Org Server Extension, version 6.0
[ 52.170] (II) Loading extension DOUBLE-BUFFER
[ 52.170] (II) LoadModule: "glx"
[ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 52.180] (II) Module glx: vendor="NVIDIA Corporation"
[ 52.180] compiled for 4.0.2, module version = 1.0.0
[ 52.180] Module class: X.Org Server Extension
[ 52.180] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
[ 52.180] (II) Loading extension GLX
[ 52.180] (II) LoadModule: "record"
[ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 52.180] (II) Module record: vendor="X.Org Foundation"
[ 52.180] compiled for 1.12.2, module version = 1.13.0
[ 52.180] Module class: X.Org Server Extension
[ 52.180] ABI class: X.Org Server Extension, version 6.0
[ 52.180] (II) Loading extension RECORD
[ 52.180] (II) LoadModule: "dri"
[ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 52.180] (II) Module dri: vendor="X.Org Foundation"
[ 52.180] compiled for 1.12.2, module version = 1.0.0
[ 52.180] ABI class: X.Org Server Extension, version 6.0
[ 52.180] (II) Loading extension XFree86-DRI
[ 52.180] (II) LoadModule: "dri2"
[ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 52.181] (II) Module dri2: vendor="X.Org Foundation"
[ 52.181] compiled for 1.12.2, module version = 1.2.0
[ 52.181] ABI class: X.Org Server Extension, version 6.0
[ 52.181] (II) Loading extension DRI2
[ 52.181] (II) LoadModule: "nv"
[ 52.181] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 52.181] (II) Module nv: vendor="X.Org Foundation"
[ 52.181] compiled for 1.12.0.901, module version = 2.1.18
[ 52.181] Module class: X.Org Video Driver
[ 52.181] ABI class: X.Org Video Driver, version 12.0
[ 52.181] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
GeForce GTS 360M, Quadro FX 1800M
[ 52.183] (--) using VT number 7
[ 52.211] (--) NV: Found NVIDIA GeForce 310M at 02@00:00:0
[ 52.211] (II) Loading sub module "int10"
[ 52.211] (II) LoadModule: "int10"
[ 52.211] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 52.233] (II) Module int10: vendor="X.Org Foundation"
[ 52.233] compiled for 1.12.2, module version = 1.0.0
[ 52.233] ABI class: X.Org Video Driver, version 12.0
[ 52.233] (II) NV(0): Initializing int10
[ 52.234] (II) NV(0): Bad V_BIOS checksum
[ 52.234] (II) NV(0): Primary V_BIOS segment is: 0xc000
[ 52.234] (--) NV(0): Console is VGA mode 0x105
[ 52.234] (II) NV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 52.234] (==) NV(0): Depth 24, (--) framebuffer bpp 32
[ 52.234] (==) NV(0): RGB weight 888
[ 52.234] (==) NV(0): Default visual is TrueColor
[ 52.235] (==) NV(0): Using hardware cursor
[ 52.235] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 52.245] (II) NV(0): MMIO registers mapped at 0x7f5b4a0aa000
[ 52.245] (--) NV(0): Total video RAM: 512.0 MB
[ 52.245] (--) NV(0): BAR1 size: 256.0 MB
[ 52.245] (--) NV(0): Mapped memory: 256.0 MB
[ 52.317] (II) NV(0): Linear framebuffer mapped at 0x7f5b3a0aa000
[ 52.317] (II) Loading sub module "i2c"
[ 52.317] (II) LoadModule: "i2c"
[ 52.317] (II) Module "i2c" already built-in
[ 52.317] (II) Loading sub module "ddc"
[ 52.317] (II) LoadModule: "ddc"
[ 52.317] (II) Module "ddc" already built-in
[ 52.317] (--) NV(0): Connector map:
[ 52.317] (--) NV(0): Bus 3 -> SOR0 (LVDS)
[ 52.317] (--) NV(0): Bus 0 -> DAC1
[ 52.317] (--) NV(0): Bus 8 -> SOR3
[ 52.317] (--) NV(0): Load detection: 340
[ 52.317] (II) NV(0): I2C bus "I2C0" initialized.
[ 52.317] (II) NV(0): Output VGA1 has no monitor section
[ 52.317] (II) NV(0): I2C bus "I2C8" initialized.
[ 52.317] (II) NV(0): Output DVI3 has no monitor section
[ 52.317] (II) NV(0): LVDS native size 1366x768
[ 52.317] (II) NV(0): Output LVDS has no monitor section
[ 52.317] (II) NV(0): I2C bus "I2C3 (LVDS)" initialized.
[ 52.317] (II) NV(0): Probing for EDID on I2C bus 0...
[ 52.317] (II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
[ 52.321] (II) NV(0): ... none found
[ 52.321] (--) NV(0): Trying load detection on VGA1 ... nothing.
[ 52.366] (II) NV(0): EDID for output VGA1
[ 52.366] (II) NV(0): Probing for EDID on I2C bus 8...
[ 52.366] (II) NV(0): I2C device "I2C8:ddc2" registered at address 0xA0.
[ 52.370] (II) NV(0): ... none found
[ 52.370] (II) NV(0): EDID for output DVI3
[ 52.370] (II) NV(0): Probing for EDID on I2C bus 3...
[ 52.370] (II) NV(0): I2C device "I2C3 (LVDS):ddc2" registered at address 0xA0.
[ 52.422] (--) NV(0): DDC detected a DFP:
[ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
[ 52.422] (II) NV(0): Year: 2009 Week: 4
[ 52.422] (II) NV(0): EDID Version: 1.3
[ 52.422] (II) NV(0): Digital Display Input
[ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 52.422] (II) NV(0): Gamma: 2.20
[ 52.422] (II) NV(0): No DPMS capabilities specified
[ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 52.422] (II) NV(0): First detailed timing is preferred mode
[ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
[ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 52.422] (II) NV(0): Manufacturer's mask: 0
[ 52.422] (II) NV(0): Supported detailed timing:
[ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
[ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
[ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): CMO
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): EDID (in hex):
[ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
[ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
[ 52.422] (II) NV(0): 1e505400000001010101010101010101
[ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
[ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
[ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
[ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
[ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
[ 52.422] (II) NV(0): EDID for output LVDS
[ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
[ 52.422] (II) NV(0): Year: 2009 Week: 4
[ 52.422] (II) NV(0): EDID Version: 1.3
[ 52.422] (II) NV(0): Digital Display Input
[ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 52.422] (II) NV(0): Gamma: 2.20
[ 52.422] (II) NV(0): No DPMS capabilities specified
[ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 52.422] (II) NV(0): First detailed timing is preferred mode
[ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
[ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 52.422] (II) NV(0): Manufacturer's mask: 0
[ 52.422] (II) NV(0): Supported detailed timing:
[ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
[ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
[ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): CMO
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): EDID (in hex):
[ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
[ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
[ 52.422] (II) NV(0): 1e505400000001010101010101010101
[ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
[ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
[ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
[ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
[ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
[ 52.422] (II) NV(0): EDID vendor "CMO", prod id 5760
[ 52.422] (II) NV(0): Printing probed modes for output LVDS
[ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 52.422] (II) NV(0): Output VGA1 disconnected
[ 52.422] (II) NV(0): Output DVI3 disconnected
[ 52.422] (II) NV(0): Output LVDS connected
[ 52.422] (II) NV(0): Using exact sizes for initial modes
[ 52.422] (II) NV(0): Output LVDS using initial mode 1366x768
[ 52.422] (II) NV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 52.422] (--) NV(0): Virtual size is 1366x1366 (pitch 1536)
[ 52.422] (**) NV(0): Driver mode "1366x768": 75.5 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 52.422] (==) NV(0): DPI set to (96, 96)
[ 52.422] (II) Loading sub module "fb"
[ 52.422] (II) LoadModule: "fb"
[ 52.433] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 52.447] (II) Module fb: vendor="X.Org Foundation"
[ 52.447] compiled for 1.12.2, module version = 1.0.0
[ 52.447] ABI class: X.Org ANSI C Emulation, version 0.4
[ 52.447] (II) Loading sub module "xaa"
[ 52.447] (II) LoadModule: "xaa"
[ 52.447] (II) Loading /usr/lib/xorg/modules/libxaa.so
[ 52.458] (II) Module xaa: vendor="X.Org Foundation"
[ 52.458] compiled for 1.12.2, module version = 1.2.1
[ 52.458] ABI class: X.Org Video Driver, version 12.0
[ 52.458] (II) Loading sub module "ramdac"
[ 52.458] (II) LoadModule: "ramdac"
[ 52.458] (II) Module "ramdac" already built-in
[ 52.458] (--) Depth 24 pixmap format is 32 bpp
[ 52.475] (--) NV(0): 183.99 MB available for offscreen pixmaps
[ 52.507] (II) NV(0): Using XFree86 Acceleration Architecture (XAA)
[ 52.507] Screen to screen bit blits
[ 52.507] Solid filled rectangles
[ 52.507] 8x8 mono pattern filled rectangles
[ 52.507] Indirect CPU to Screen color expansion
[ 52.507] Solid Lines
[ 52.507] Scanline Image Writes
[ 52.508] Setting up tile and stipple cache:
[ 52.508] 32 128x128 slots
[ 52.508] 32 256x256 slots
[ 52.508] 16 512x512 slots
[ 52.508] (==) NV(0): Backing store disabled
[ 52.508] (==) NV(0): Silken mouse enabled
[ 52.508] (II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 52.508] (==) NV(0): DPMS enabled
[ 55.081] (--) RandR disabled
[ 55.081] (II) Initializing built-in extension Generic Event Extension
[ 55.081] (II) Initializing built-in extension SHAPE
[ 55.081] (II) Initializing built-in extension MIT-SHM
[ 55.081] (II) Initializing built-in extension XInputExtension
[ 55.081] (II) Initializing built-in extension XTEST
[ 55.081] (II) Initializing built-in extension BIG-REQUESTS
[ 55.081] (II) Initializing built-in extension SYNC
[ 55.081] (II) Initializing built-in extension XKEYBOARD
[ 55.081] (II) Initializing built-in extension XC-MISC
[ 55.081] (II) Initializing built-in extension SECURITY
[ 55.081] (II) Initializing built-in extension XINERAMA
[ 55.081] (II) Initializing built-in extension XFIXES
[ 55.081] (II) Initializing built-in extension RENDER
[ 55.081] (II) Initializing built-in extension RANDR
[ 55.081] (II) Initializing built-in extension COMPOSITE
[ 55.081] (II) Initializing built-in extension DAMAGE
[ 55.103] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 55.132] (II) NV(0): Setting screen physical size to 361 x 203
[ 55.715] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 55.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 55.715] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 55.715] (II) LoadModule: "evdev"
[ 55.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 55.725] (II) Module evdev: vendor="X.Org Foundation"
[ 55.725] compiled for 1.12.0, module version = 2.7.0
[ 55.725] Module class: X.Org XInput Driver
[ 55.725] ABI class: X.Org XInput driver, version 16.0
[ 55.725] (II) Using input driver 'evdev' for 'Power Button'
[ 55.725] (**) Power Button: always reports core events
[ 55.725] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 55.725] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 55.725] (--) evdev: Power Button: Found keys
[ 55.725] (II) evdev: Power Button: Configuring as keyboard
[ 55.725] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 55.725] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 55.725] (**) Option "xkb_rules" "evdev"
[ 55.725] (**) Option "xkb_model" "evdev"
[ 55.725] (**) Option "xkb_layout" "se"
[ 55.918] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 55.918] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 55.918] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 55.918] (II) Using input driver 'evdev' for 'Video Bus'
[ 55.918] (**) Video Bus: always reports core events
[ 55.918] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 55.918] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 55.918] (--) evdev: Video Bus: Found keys
[ 55.918] (II) evdev: Video Bus: Configuring as keyboard
[ 55.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
[ 55.918] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 55.918] (**) Option "xkb_rules" "evdev"
[ 55.918] (**) Option "xkb_model" "evdev"
[ 55.918] (**) Option "xkb_layout" "se"
[ 55.919] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 55.919] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 55.919] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 55.919] (II) Using input driver 'evdev' for 'Power Button'
[ 55.919] (**) Power Button: always reports core events
[ 55.919] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 55.919] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 55.919] (--) evdev: Power Button: Found keys
[ 55.919] (II) evdev: Power Button: Configuring as keyboard
[ 55.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 55.919] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 55.919] (**) Option "xkb_rules" "evdev"
[ 55.919] (**) Option "xkb_model" "evdev"
[ 55.919] (**) Option "xkb_layout" "se"
[ 55.920] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 55.920] (II) No input driver specified, ignoring this device.
[ 55.920] (II) This device may have been added with another device file.
[ 55.921] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 55.921] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 55.921] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 55.921] (II) Using input driver 'evdev' for 'Sleep Button'
[ 55.921] (**) Sleep Button: always reports core events
[ 55.921] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[ 55.921] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 55.921] (--) evdev: Sleep Button: Found keys
[ 55.921] (II) evdev: Sleep Button: Configuring as keyboard
[ 55.921] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
[ 55.921] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 55.921] (**) Option "xkb_rules" "evdev"
[ 55.921] (**) Option "xkb_model" "evdev"
[ 55.921] (**) Option "xkb_layout" "se"
[ 55.922] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[ 55.922] (II) No input driver specified, ignoring this device.
[ 55.922] (II) This device may have been added with another device file.
[ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 55.923] (II) No input driver specified, ignoring this device.
[ 55.923] (II) This device may have been added with another device file.
[ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 55.923] (II) No input driver specified, ignoring this device.
[ 55.923] (II) This device may have been added with another device file.
[ 55.924] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 55.924] (II) No input driver specified, ignoring this device.
[ 55.924] (II) This device may have been added with another device file.
[ 55.924] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 55.924] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 55.924] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 55.924] (**) Logitech USB Receiver: always reports core events
[ 55.924] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 55.925] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 55.925] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 55.925] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 55.925] (--) evdev: Logitech USB Receiver: Found relative axes
[ 55.925] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 55.925] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 55.925] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 55.925] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 55.925] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 55.925] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[ 55.925] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 55.925] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 55.925] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 55.925] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 55.925] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 55.925] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 55.926] (II) No input driver specified, ignoring this device.
[ 55.926] (II) This device may have been added with another device file.
[ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 55.927] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 55.927] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
[ 55.927] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 55.927] (**) Logitech USB Receiver: always reports core events
[ 55.927] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 55.927] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 55.927] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 55.927] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 55.927] (--) evdev: Logitech USB Receiver: Found relative axes
[ 55.927] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 55.927] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 55.927] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 55.927] (--) evdev: Logitech USB Receiver: Found keys
[ 55.927] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 55.927] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 55.927] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 55.927] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 55.927] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
[ 55.927] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 55.927] (**) Option "xkb_rules" "evdev"
[ 55.927] (**) Option "xkb_model" "evdev"
[ 55.927] (**) Option "xkb_layout" "se"
[ 55.927] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 55.927] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 55.927] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 55.927] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 55.927] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 55.927] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 55.927] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
[ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
[ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
[ 55.927] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
[ 55.927] (**) USB 2.0 PC Camera: always reports core events
[ 55.927] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
[ 55.927] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
[ 55.927] (--) evdev: USB 2.0 PC Camera: Found keys
[ 55.927] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
[ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[ 55.927] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
[ 55.927] (**) Option "xkb_rules" "evdev"
[ 55.927] (**) Option "xkb_model" "evdev"
[ 55.927] (**) Option "xkb_layout" "se"
[ 55.928] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[ 55.928] (II) No input driver specified, ignoring this device.
[ 55.928] (II) This device may have been added with another device file.
[ 55.928] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[ 55.928] (II) No input driver specified, ignoring this device.
[ 55.928] (II) This device may have been added with another device file.
[ 55.928] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 55.928] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 55.928] (**) AT Translated Set 2 keyboard: always reports core events
[ 55.928] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 55.928] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 55.928] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 55.928] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 55.929] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 55.929] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 55.929] (**) Option "xkb_rules" "evdev"
[ 55.929] (**) Option "xkb_model" "evdev"
[ 55.929] (**) Option "xkb_layout" "se"
[ 55.929] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 55.929] (II) LoadModule: "synaptics"
[ 55.929] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 55.967] (II) Module synaptics: vendor="X.Org Foundation"
[ 55.967] compiled for 1.12.1, module version = 1.6.1
[ 55.967] Module class: X.Org XInput Driver
[ 55.967] ABI class: X.Org XInput driver, version 16.0
[ 55.967] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 55.967] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 55.967] (**) Option "Device" "/dev/input/event9"
[ 55.967] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 55.968] (**) Option "TapButton1" "1"
[ 55.968] (**) Option "TapButton2" "2"
[ 55.968] (**) Option "TapButton3" "3"
[ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 55.968] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 55.968] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 55.968] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 55.969] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 55.969] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 55.969] (II) No input driver specified, ignoring this device.
[ 55.969] (II) This device may have been added with another device file.
[ 55.970] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 55.970] (II) No input driver specified, ignoring this device.
[ 55.970] (II) This device may have been added with another device file.
From what I can tell it is something with the nvidia driver that doesn't play well with xorg. Perhaps some kind of autodetection that takes long time to finish. Anyone got any ideas how to solve this?
Last edited by Larsson (2012-06-13 18:59:43)Didn't see they where timestamps . Yes it seems that glx is one cause of the delay. I've tried some different xorg.conf, and it's always ligglx.so or NV-GLX that slows it down. Any suggestions on how I can speed this up?
ps. The computer is ok. Although the garddrive is a SATA 3.0Gb/s, 5400 RPM. But I don't think this is the problem? -
Xorg nvidia resolution problems with KDE
I just installed Arch 2008.04-RC last night. I configured xorg.conf using nvidia with the screen resolution set to "1440x900" which worked in both the X Windows and KDE 3.5.9.
I was trying to get xine working with Amarok. At one point, I deleted ~/.xine and xinirtc to force itself to reset. I then rebooted at which point I noticed the resolution set only at "640x400" in KDE. I checked the Display Settings and that was the maximum resolution I could choose. I then switched to the vesa drivers which allowed a maximum resolution of "1024x768".
I removed xorg and nvidia and reinstalled. I can no longer get a resolution of "1440x900" resolution for my Viewsonic VA1926v flat screen monitor. I read on the xorg log that
I am using the Nvidia GeForce 7300 GT video graphics card. uname -r: 2.6.25-ARCH
From /var/log/Xorg.0.log I get the following information when I am using vesa:
(II) VESA(0): Total Memory: 4096 64KB banks (262144kB)
(II) VESA(0): Generic Monitor: Using hsync range of 30.00-82.00 kHz
(II) VESA(0): Generic Monitor: Using vrefresh range of 50.00-75.00 Hz
(II) VESA(0): Not using mode "1440x900" (no mode of this name)
(II) VESA(0): Not using mode "1280x1024" (no mode of this name)
(--) VESA(0): Virtual size is 1024x768 (pitch 1024)
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): Built-in mode "640x480"
(**) VESA(0): Built-in mode "640x400"
(**) VESA(0): Built-in mode "320x400"
(**) VESA(0): Built-in mode "320x240"
(**) VESA(0): Built-in mode "320x200"
(==) VESA(0): DPI set to (96, 96)
With nvidia, it just states that no mode is available for '1440x900' and selects virtual size of '640x400'.
My xorg.conf below:
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Horizsync 30.0 - 82.0
Vertrefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "nVidia Corporation G70 [GeForce 7300 GT]"
Driver "vesa"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G70 [GeForce 7300 GT]"
Monitor "Generic Monitor"
Defaultdepth 24
Option "AddARGBVisuals" "True"
Option "NoLogo" "True"
Option "AddARGBGLXVisuals" "True"
Option "UseEdidDpi" "false"
Option "DPI" "96 x 96"
Option "ConnectedMonitor" "DFP"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1440x900" "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
I am at a loss at trying to fix this one. Something similar happened when I was running Gentoo on this same desktop back in April. I also have the same low resolution problem when using Sabayon.
Any help here would be much appreciated :-)I thought these frequencies were a bit low too. My manual said there were the frequencies. I checked online and it said the same. I need to do more research on it.
I did manage to get my 1440x900 resolution back using the open source nv drivers. I had to do the same with Gentoo and Linux Mint in the past. Everytime I used the nvidia drivers, my monitor returns to the 640x400 resolution and I noticed the only way to avoid it was to use nv. I do not play games online or use Compiz so it does not bother me.
Thanks. -
Hi
1.running archlinux for about 2 weeks, no problems, only some small ones solved with the wiki
2.new harddrive - ergo new installation
3.installation of the base system via ftp, the other parts too ( xorg, gnome, ... )
4.start of hwd -x -> cannot find xservers; ok on with xorg -configure
5.manual configuration of xorg.conf -> monitor/nvidia
Finally startx, abort because missing 'nvidia' and 'glx' -> no problem ;-), manual copy in the right path; X starts and aborts because of missing mouse device ( mouse/keyboard driver is installed; mouse at auto ) ...
Btw. my mouse is a Razor Copperhead, no problem so far with xorg 6.8.2.
Read some threads, but to no avail or iam to dump to get it ...
Ok iam frustrated - is this some kind of beta test?
Greetings OliverRead this topic http://bbs.archlinux.org/viewtopic.php?t=19019
It may solve yr gnome problems -
[Problem] Xorg.conf and Razer DeathAdder Mouse
First of all, Hy everyone Its my first time on Arch, and after a lot of reading and reading, and some more reading, i managed to install it with windows xp on a dual boot. After installing xorg with pacman, and configuring my xorg.conf look like this:
Section "ServerLayout"
Identifier "Layout[all]"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Option "AIGLX" "on"
EndSection
Section "Files"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/opt/kde3/share/fonts"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "dri"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
EndSection
Section "InputDevice"
Identifier "Keyboard[0]"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "pt-latin1.map.gz"
Option "XkbModel" "logitech"
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
Option "XkbRules" "xfree86"
Option "XkbVariant" "basic,extended"
EndSection
Section "InputDevice"
Identifier "Mouse[1]"
Driver "mouse"
Option "Name" "Razer DeathAdder"
Option "corepointer"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
Option "Buttons" "7"
Option "ButtonsMapping" "1 2 3 6 7"
Option "Resolution" "900"
Option "SampleRate" "1000"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "XAANoOffscreenPixmaps" "on"
Option "VideoOverlay" "off"
Option "OpenGLOverlay" "off"
Option "TexturedVideo" "on"
Option "Textured2D" "on"
Option "TexturedXrender" "off"
Option "UseFastTLS" "1"
Option "BackingStore" "on"
Option "mtrr" "on"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050_60" "1152x864_75" "1024x768_85" "800x600_100" "640x480_100"
EndSubSection
EndSection
Section "DRI"
Group "Video"
Mode 0666
EndSection
Section "Extensions"
Option "RENDER" "Enable"
Option "DAMAGE" "Enable"
Option "Composite" "Enable"
EndSection
The problem is, when i do :
X -config /root/X11/xorg.conf
i see a black screen with the cross pointer of the mouse, but i cant move the mouse, and i cant quit from with tried CTRL+ALT+BACKSPACE, nothing, i do ALT+F2, and open a new shell, and then i dot ALT+F1 to return to the old one, and i see some erros, like, device "mouse" not found device "kbd" not found.. :S
Then i tried
Cat /dev/input/mice
and i move the mouse, and click, and everything seems to work just fine.
Sorry if this in the wrong section, or the problem itself is dumb, but i tried everything belive me. If someone could help, i would apreciate. Btw, not an english person, i have a very bad english indeed lol
Tks in advance
Last edited by Camelon (2008-07-31 20:58:16)i have a nvidia 6600 and a deathadder, i'll post my xorg.conf and see you you can get something useful:
#===============================
#ecra, output devices
#===============================
Section "Monitor"
Identifier "Default Monitor"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
Option "DPI" "96 x96"
EndSection
Section "Device"
Identifier "Default nvidia Device"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Ecra"
Device "Default nvidia Device"
Monitor "Default Monitor"
Option "RenderAccel" "true"
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
Option "NoLogo" "true"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
#===============================
#rato, teclado, input devices
#===============================
Section "InputDevice"
Identifier "Rato"
Option "Device" "/dev/input/mouse_udev"
Driver "mouse"
Option "Resolution" "1800"
Option "SampleRate" "1000"
Option "ButtonMapping" "1 2 3 6 7"
EndSection
Section "InputDevice"
Identifier "Teclado"
Driver "kbd"
Option "XkbLayout" "pt"
EndSection
#===========================
#wacom bamboo tablet
#===========================
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "USB" "on"
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "USB" "on"
EndSection
Section "InputDevice"
Identifier "pad"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "pad"
Option "USB" "on"
EndSection
#=====================
#the server layout
#=====================
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Ecra"
InputDevice "Teclado" "CoreKeyboard"
InputDevice "Rato" "CorePointer"
InputDevice "stylus" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "pad"
EndSection
and i think i have some udev rules to create those mouse links:
/etc/udev/rules.d/10-local.rules:
KERNEL=="event*", SYSFS{idVendor}=="056a", NAME="input/%k", SYMLINK="input/wacom"
KERNEL=="mouse*", SYSFS{idProduct}=="0007", NAME="input/%k", SYMLINK="input/mouse_udev"
you can try something like this. hope it helps -
Problem with Wine, NVidia and fullscreen games
Hi,
I'm writing about a problem i recently noticed with wine, nvidia gpu and fullscreen 2d games.Basically the problem is as follows - i am running arch with the latest kernel and nvidia drivers on Thinkpad T61 with NVidia Quadro NVS 140M. I have a problem with old 2d games like Red Alert 2, Baldur's Gate, Icewind Dale, Diablo 2, Heroes 3. All of these games do not support the native 1440x900 resolution of my screen and all of them work fine in window mode but crash if fullscreen is selected. I managed to get some of them working by making them work at higher resolutions. For example although Red Alert 2 does not support 1440x900, it can be easily made to work at that resolution and after i applied the necessary settings it worked. The same was with Heroes 3 - by default it does not support 1440x900 and it used to work only i window mode but there is a HD mod which allows it to run in higher resolutions and after i applied it it worked perfectly in fullscreen. I haven't thested Baldur's Gate and Icewind Dale but i think it will work there too.
The problem is that i cannot use this approach to all games - for example i must run Diablo 2 and Starcraft in their original resolutions. I read somewhere that the problem is that wine can only change between the resolutions described in the xorg.conf file and if doesn't find the necessary resolution the game will crash or will only take the portion of the screen that is its resolution - for example when i play Starcraft rather than stretching it to the whole screen it simply takes 640x480 pixels of my screen and the game is displayed in the top left corner of the screen leaving everything else black.
I didn't have this problem before - it is something new though i'm not sure since when do i have the problem because i rarely play games. As for the idea that the problem may be related to the resolutions defined in the Xorg.conf file, my xorg.conf is automatically generated by the nvidia installer and there are no resolutions defined there.brebs wrote:
Try nvidia 304.48
I remember that issue, with the 302 series.
I have Nvidia 304.48 installed and the problem still exists (it also happens with Catalyst). This didn't occur with 295.59 using the same version of Wine.
https://bbs.archlinux.org/viewtopic.php?id=55145
https://bbs.archlinux.org/viewtopic.php?id=147073 -
W520, Windows 7 (64 bit), NVIDIA Quadro 1000M 2GB DDR3, purchased November 2011.
Problems (related?):
-External monitor remains unrecognized when connected to W520.
-NVIDIA not recognized or working. Maybe reason external monitor not recognized?
Tried to connect this computer to an HP2511x external monitor (via VGA direct to the computer or through docking station) but the monitor is not recognized. Last made this connection about a year ago and it worked fine at that time: plugged the VGA cable into the W520 and the external monitor connected automatically, in duplicate mode. The HP usually is connected to another computer and works fine, and the VGA cable was tested recently and is good. Tried the options at Fn/F7 and windows key/P: the HP monitor remains black.
Studied the external monitor issue in forums and learned about the NVIDIA comments. In follow up, I learned that the NVIDIA device is not listed in my Device Manager, under Display Adapters or elsewhere. Right-clicking the desktop does no bring up the NVIDIA Control Panel.
When I do a search for the NVIDIA Control Panel, this message appears:
“NVIDIA display settings are not available. You are not currently using a display attached to an NVIDIA GPU.” This appears whether VGA connected to the external monitor or not.
I attempted, several times, to download the NVIDIA driver from the NVIDIA site via auto detection. The auto detect page instructed me to download Java, but Java is already loaded and current. So I entered the NVIDIA info manually, which eventually lead to this message:
“NVIDIA Installer failed”
HD Audio Driver – Not Installed
NVIDIA WMI – Not Installed
nView – Not Installed
Graphics Driver – Failed
3D Vision Driver – Not Installed
So, I went to the Lenovo website and downloaded:
“NVIDIA Optimus Display Driver for Windows 7 (64-bit) - ThinkPad”
After a restart, right clicking the desktop still does not show the NVIDIA Control Panel.
The Device Manager shows:
-Intel(R) HD Graphic Family
-Unknown device
I clicked on the Unknown device and read:
-Device type: Display adapters
Manufacturer: Unknown
Location: PCI bus 1, device 0, function 0
Device status: Reinstall the driver for this device. (Code 18)
Then I clicked the Reinstall Driver button, which lead to this message:
“Windows encountered a problem installing the driver software for your device. Windows found driver software for your device but encountered an error while attempting to install it. NVIDIA Quadro 1000M”
I went through the above processes several times to be certain that I did not miss something.
There is a GeForce shortcut on the desktop and when clicked, leads to this message:
“GeForce Experience encountered an error and must close.”
Tried rebooting to BIOS:
BIOS>Config>Display: the options are:
-Boot Display Device (ThinkPad LCD) default
-Graphic Device (NVIDIA Optimus)
-OS Detection for NVIDIA Optimus (enabled)
Changed display to Graphic Device, tapped F10 to save and exit, then save, before computer goes into normal mode.
Try Fn/F7, duplicate, then extend, then projector and in all cases the HP monitor remains black, unrecognized. Message on W520 screen:
“Unable to connect to a computer.
No projector was detected.”
So, back to reboot> BIOS>Config>Display were I find that the setup reverted to the default. Changed display to OS Detection for NVIDIA Optimus disabled. Save, reboot, Fn/F7 and again no recognition of the HP monitor. Reboot, BIOS etc, and the display option is back to the original default.
What do I need to do to get NVIDIA and the external monitor working on this W520?
Thank you.Hi RR
1. Ensure your BIOS is set to NVIDIA Optimus for multiple monitor connectivity.
2. Download and update your Intel and NVIDIA driver from it's official website. Clicking Intel and NVIDIA will link directly to the download page for latest driver.
3. If the 2 above succeed, but Fn+F7 still can't display your external monitor. Try right click Desktop > NVIDIA Control Panel > Display > Set up multiple displays. (The only workable method for W520 - Windows 8.1)
Peter
ThinkPad W520 | ThinkCentre E73 SFF | IdeaPad K1 | IdeaPad Yoga 11s | Miix 2 10" | 3000 Y300
Give kudos to reward people for their assistance | Mark thread solved if the solution works | Please do not send me an e-mail regarding technical questions | I am not an Lenovo employee
=====================================
Dolby ; IdeaPad Slate Tablet -
have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
The Apple icon, usually at top left corner, appears in top right corner in a strip including all that left hand. When the computer is restarted, the screen goes back to normal. But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode. My large flat screen is relatively new.
The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.That sounds like a Hardware problem.
You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation. -
Massive artifacts, redraw and performance problems: xorg 1.8 and Intel
Hi there.
Since the update to xorg-server 1.8 my intel GMA950 powered lap top is seriously acting up.
*Performance has dropped significantly, Games or compiz run slower than before
*Font drawing is sometimes garbled, sometimes not
*Some windows or parts of windows (sometimes only the decorations) show artifacts
*Drawing of fonts while typing is delayed by 1 or more characters sometimes
It might be related to this bug or the problem described in this thread.
Just look at this screenshot:
I tired moving xorg.conf, I tried running compiz with --indirect-rendering, I tried all kinds of options in xorg.conf and all but it just remains broken like this. Has anyone got similar problems and a solution?
Last edited by Shapeshifter (2010-06-28 15:07:21)I've been having the same issue but not to the extent of the OP.
I read the man for intel
man intel
and added these three lines to my xorg.conf
Option "XvPreferOverlay" "false"
Option "SwapbuffersWait" "false"
Option "Tiling" "false" #{edit: after doing some testing I found tiling made no differnece so I ended up commenting it out}
The first option I added because the man says
The overlay
behaves incorrectly in the presence of compositing, but some
prefer it due to it syncing to vblank in the absence of com‐
positing
I use compiz ergo i have compositing and I noticed my video tearing and skipping sometimes. Seems to work fine now (more testing will be required)
The second option I added because the man says
Note that when enabled, this option can
adversely affect the framerate of applications that render
frames at less than refresh rate.
I have a hunch compiz probably isn't rendering at the refresh rate and also video would be rendered at less than my vert refresh of 60. So I disabled it.
The third and last option I added was because the man says
In most cases (especially for complex rendering),
tiling dramatically improves performance.
Well this may be a case where it doesn't and the posters above have noticed improvements. {edit: after doing some testing I found this made no differnece so I ended up commenting it out}
In the end moving windows around the screen do not tear anymore and my video is smoother. I enabled all three at once so it maybe that one or a combination of 2 or possibly all 3 resulted in change. I suspect I will do some more testing but hopefully this is a place to start fro some of you having this issue.
Last edited by George.Harmony (2010-07-11 21:21:17)
Maybe you are looking for
-
V. 7.1.0.37 doesn't retain settings
I'm using version 7.1.0.37 of the Blackberry Desktop Software, and it keeps unchecking the 'Replace all entries on your computer with the entries on your device' checkbox in the Tasks configuration settings, and even when I set the checkbox & sync ri
-
Why do I need a hardwire for my WRVS4400N wireless router?
I am not very technically inclined. Plug and play is my way. So when I got my first router (a linksys) i plugged in the ethernet cables and voila!-----internet access as well as connectivity for my xbox 360, ps3 and Wii. The people rejoiced. Times
-
Dynamic columns with grouping.... in crystal report...using java /c# api ??
I need to create a report with dynamic columns for e.g/ Pre Scen 1 Scen 2 Scen 3 Scen 4 Scen 5 Scen 6 ..... *Total 4.5118 4.5118 4.5118 4.5118 4.5118 4.5
-
How to get Invoice status value in oracle payable
Hi guys, I am new in oracle apps plz tell me how to get invoice status value of prepayment invoice type in payable. Navigation ->Payables->Oracle Payables ->Invoices->Inquiry->Invoices ->go to Invoice status block and open to Status LOV plz provide m
-
Why don't earbuds for ipod work on ipad?
just got my new ipad -no headphones - so why doesn't the set of ear buds I got with the ipod work?