Xorg packages 4 catalyst

Good time of day everybody. I need some help with catalyst. I can't install catalyst because i can't get required xorg packages.
The main problem is (how i think) xorg-server. Needed xorg-server version is < 1.7.0 especial with fedora's no backfill patch.
I can't compile it under the 31-32 kernels, because dependences are not correct & compilation always ends with errors, i don't know all packages & versions of them required to fix dependences & compile xorg-server. Already compiled xorg-server is only for 30 version of kernel...
So can any1 give me those files already precompiled 4 31-32 kernels. or it will be better if link or even repository. Oh btw i ask 4 31-32 kernel because i'm going to install arch on laptop & i don't know about drivers for some devices under 32 version of kernel (they may work not correctly) .
I need x86_64 xorg-packages with which can work catalyst driver.
Thank you for help!

ATI mobility radeon hd 3650...
I've read most of all posts in that topic, but it didn't help me. All i need i listed above
Last edited by Zenfarg (2010-03-10 11:58:49)

Similar Messages

Issue on VMWare post Xorg packages update

I run arch as a guest on VMWare Player(6.0.2). I am facing this problem where I cannot start a DE nor WM post the recent updates to some of the xorg packages. I tried KDE and dwm. The updates done are as below:
[2014-07-29 21:04] [PACMAN] upgraded cryptsetup (1.6.5-1 -> 1.6.5-2)
[2014-07-29 21:04] [PACMAN] upgraded iproute2 (3.14.0-1 -> 3.15.0-1)
[2014-07-29 21:04] [PACMAN] upgraded libdrm (2.4.54-1 -> 2.4.55-1)
[2014-07-29 21:04] [PACMAN] upgraded lib32-libdrm (2.4.54-1 -> 2.4.55-1)
[2014-07-29 21:04] [PACMAN] upgraded libxfont (1.4.7-3 -> 1.5.0-1)
[2014-07-29 21:05] [PACMAN] upgraded linux (3.15.5-2 -> 3.15.7-1)
[2014-07-29 21:05] [PACMAN] upgraded linux-headers (3.15.5-2 -> 3.15.7-1)
[2014-07-29 21:05] [PACMAN] upgraded xf86-input-evdev (2.9.0-1 -> 2.9.0-2)
[2014-07-29 21:05] [PACMAN] upgraded xf86-input-vmmouse (13.0.0-3 -> 13.0.0-4)
[2014-07-29 21:05] [PACMAN] upgraded xf86-video-vmware (13.0.2-1 -> 13.0.2-2)
[2014-07-29 21:05] [PACMAN] installed libepoxy (1.2-2)
[2014-07-29 21:05] [PACMAN] upgraded xorg-server-common (1.15.2-1 -> 1.16.0-5)
[2014-07-29 21:05] [PACMAN] upgraded xorg-server (1.15.2-1 -> 1.16.0-5)
The Xorg log is as below. I can see there seems to be a segmentation fault while trying to load the vgahw module. I am not sure how investigate further, any help would be appreciated.
[ 22.191]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 22.191] X Protocol Version 11, Revision 0
[ 22.191] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 22.191] Current Operating System: Linux asecretplace 3.15.7-1-ARCH #1 SMP PREEMPT Mon Jul 28 20:06:17 CEST 2014 x86_64
[ 22.191] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d163345c-8a2e-4ec1-9b0a-916fd3ea1d2d rw
[ 22.192] Build Date: 25 July 2014 10:42:31PM
[ 22.192]
[ 22.192] Current version of pixman: 0.32.6
[ 22.192] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.192] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.192] (==) Log file: "/home/nsm09/.local/share/xorg/Xorg.0.log", Time: Wed Jul 30 20:43:26 2014
[ 22.240] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.240] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 22.270] (==) No Layout section. Using the first Screen section.
[ 22.270] (==) No screen section available. Using defaults.
[ 22.270] (**) |-->Screen "Default Screen Section" (0)
[ 22.270] (**) | |-->Monitor "<default monitor>"
[ 22.270] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 22.270] (==) Automatically adding devices
[ 22.270] (==) Automatically enabling devices
[ 22.270] (==) Automatically adding GPU devices
[ 22.296] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 22.297] Entry deleted from font path.
[ 22.300] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 22.300] Entry deleted from font path.
[ 22.300] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 22.303] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 22.303] Entry deleted from font path.
[ 22.303] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 22.303] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 22.303] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.303] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.304] (II) Loader magic: 0x818d80
[ 22.304] (II) Module ABI versions:
[ 22.304] X.Org ANSI C Emulation: 0.4
[ 22.304] X.Org Video Driver: 18.0
[ 22.304] X.Org XInput driver : 21.0
[ 22.304] X.Org Server Extension : 8.0
[ 22.306] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 22.307] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 22.307] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 22.328] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xe8000000/134217728, 0xfe000000/8388608, I/O @ 0x00001070/16, BIOS @ 0x????????/32768
[ 22.328] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.328] (II) LoadModule: "glx"
[ 22.332] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.437] (II) Module glx: vendor="X.Org Foundation"
[ 22.437] compiled for 1.16.0, module version = 1.0.0
[ 22.437] ABI class: X.Org Server Extension, version 8.0
[ 22.437] (==) AIGLX enabled
[ 22.437] (==) Matched vmware as autoconfigured driver 0
[ 22.437] (==) Matched vmware as autoconfigured driver 1
[ 22.437] (==) Matched modesetting as autoconfigured driver 2
[ 22.437] (==) Matched fbdev as autoconfigured driver 3
[ 22.437] (==) Matched vesa as autoconfigured driver 4
[ 22.437] (==) Assigned the driver to the xf86ConfigLayout
[ 22.437] (II) LoadModule: "vmware"
[ 22.440] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 22.748] (II) Module vmware: vendor="X.Org Foundation"
[ 22.749] compiled for 1.16.0, module version = 13.0.2
[ 22.749] Module class: X.Org Video Driver
[ 22.749] ABI class: X.Org Video Driver, version 18.0
[ 22.749] (II) LoadModule: "modesetting"
[ 22.749] (WW) Warning, couldn't open module modesetting
[ 22.749] (II) UnloadModule: "modesetting"
[ 22.749] (II) Unloading modesetting
[ 22.749] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 22.749] (II) LoadModule: "fbdev"
[ 22.750] (WW) Warning, couldn't open module fbdev
[ 22.750] (II) UnloadModule: "fbdev"
[ 22.750] (II) Unloading fbdev
[ 22.750] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 22.750] (II) LoadModule: "vesa"
[ 22.750] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 22.760] (II) Module vesa: vendor="X.Org Foundation"
[ 22.760] compiled for 1.16.0, module version = 2.3.2
[ 22.760] Module class: X.Org Video Driver
[ 22.760] ABI class: X.Org Video Driver, version 18.0
[ 22.760] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[ 22.760] (II) VESA: driver for VESA chipsets: vesa
[ 22.760] (++) using VT number 1
[ 22.760] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 22.760] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 22.760] (WW) Falling back to old probe method for vesa
[ 22.761] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 22.761] (II) vmware(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 22.761] (--) vmware(0): DRM driver version is 2.6.0
[ 22.761] (EE) vmware(0): Failed to detect device screen object capability.
[ 22.761] (WW) vmware(0): Disabling 3D support.
[ 22.761] (WW) vmware(0): Disabling Render Acceleration.
[ 22.761] (WW) vmware(0): Disabling RandR12+ support.
[ 22.761] (--) vmware(0): VMware SVGA regs at (0x1070, 0x1071)
[ 22.761] (II) Loading sub module "vgahw"
[ 22.761] (II) LoadModule: "vgahw"
[ 22.761] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 22.774] (II) Module vgahw: vendor="X.Org Foundation"
[ 22.774] compiled for 1.16.0, module version = 0.1.0
[ 22.774] ABI class: X.Org Video Driver, version 18.0
[ 22.796] (EE)
[ 22.796] (EE) Backtrace:
[ 22.808] (EE) 0: /usr/bin/Xorg.bin (xorg_backtrace+0x56) [0x5938f6]
[ 22.808] (EE) 1: /usr/bin/Xorg.bin (0x400000+0x197af9) [0x597af9]
[ 22.808] (EE) 2: /usr/lib/libc.so.6 (0x7ff555bc3000+0x33df0) [0x7ff555bf6df0]
[ 22.808] (EE) 3: /usr/lib/libpciaccess.so.0 (pci_io_write8+0x3) [0x7ff556f7c923]
[ 22.808] (EE) 4: /usr/lib/xorg/modules/libvgahw.so (vgaHWSaveColormap+0x5b) [0x7ff54ecd8fbb]
[ 22.808] (EE) 5: /usr/lib/xorg/modules/libvgahw.so (vgaHWSave+0x55) [0x7ff54ecdad55]
[ 22.808] (EE) 6: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7ff55177f000+0x7dce) [0x7ff551786dce]
[ 22.808] (EE) 7: /usr/bin/Xorg.bin (InitOutput+0xa9f) [0x47a25f]
[ 22.808] (EE) 8: /usr/bin/Xorg.bin (0x400000+0x3b67a) [0x43b67a]
[ 22.808] (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7ff555be3000]
[ 22.808] (EE) 10: /usr/bin/Xorg.bin (0x400000+0x25d0e) [0x425d0e]
[ 22.808] (EE)
[ 22.808] (EE) Segmentation fault at address 0x8
[ 22.808] (EE)
Fatal server error:
[ 22.808] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 22.808] (EE)
[ 22.808] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 22.808] (EE) Please also check the log file at "/home/nsm09/.local/share/xorg/Xorg.0.log" for additional information.
[ 22.808] (EE)
[ 22.814] (EE) Server terminated with error (1). Closing log file.
Last edited by nsmathew (2014-07-30 13:16:25)

guihkx wrote:
Okay... I did what our friend johnr suggested and after some research and a little headache, I managed to get my Arch Linux working again by downgrading just 3 packages. Here are the few steps I did:
First of, install this little package called 'downgrade' to help you downgrade the packages.
1. Okay, first we need to remove these 3 packages which requires Xorg >1.16:
# pacman -Rs xf86-input-evdev xf86-video-vmware xorg-server
2. Now we have to downgrade xf86-input-evdev to the exact version 2.9.0-1. Search for it in the list, type its corresponding number and press enter. Example:
$ downgrade xf86-input-evdev
2) xf86-input-evdev-2.9.0-1-x86_64.pkg.tar.xz (remote)
select a package by number: 2
:: Proceed with installation? [Y/n] y
add xf86-input-evdev to IgnorePkg [y/n] y
3. Downgrade xorg-server to the exact version 1.15.2-1. We have to do the same as the previous step:
$ downgrade xorg-server
4) xorg-server-1.15.2-1-x86_x64.pkg.tar.xz (remote)
select a package by number: 4
:: Proceed with installation? [Y/n] y
add xorg-server to IgnorePkg [y/n] y
4. Last but not least, we have to downgrade xf86-video-vmware to the exact version 13.0.2-1:
$ downgrade xf86-video-vmware
3) xf86-video-vmware-13.0.2-1-x86_x64.pkg.tar.xz (remote)
select a package by number: 3
:: Proceed with installation? [Y/n] y
add xf86-video-vmware to IgnorePkg [y/n] y
And that's pretty much it... I hope it helps!
P.S.: As we added those 3 packages to 'IgnorePkg', pacman won't upgrade them unless you remove them from pacman's config file: /etc/pacman.conf.
Created an account just to say that this resolved my issue as well. Thank you so much for such a great, detailed solution!

ATI Driver AUR package Catalyst-Utils libgl conflict?

Hey guys I tried installing the Catalyst-Utils b/c the Catalyst build needs the Catalyst-Utils as a dependency. Making the Catalyst-Utils package went fine, but when installing it I got this error.
bash-4.0$ sudo pacman -U catalyst-utils-9.8-1-x86_64.pkg.tar.gz
loading package data...
checking dependencies...
error: replacing packages with -U is not supported yet
error: you can replace packages manually using -Rd and -U
error: failed to prepare transaction (conflicting dependencies)
:: catalyst-utils: conflicts with libgl
bash-4.0$
Is it b/c of the opensource radeonhd drivers that I have working? Thank you for you help guys!

I installed the catalyst one as well, but I am having a problem, upon reboot, my comp is still using the radeonhd drivers. I looked in my xorg.conf and it shows that I am still using the radeonhd drivers. How do I change it so that it uses the catalyst drivers?

Issues with xorg and catalyst

Hi.
I was running an older version catalyst and xorg, but I upgraded everythin to try to get rid of an issue, and now the problem is much worse.
For some reason the open source ati/radeon drivers now result in a very high load average, so I'm trying to get the catalyst drivers to work.
However, I'm getting a floating point error.
Here's the log
[ 13.823]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 13.823] X Protocol Version 11, Revision 0
[ 13.823] Build Operating System: Linux 2.6.35-ARCH x86_64
[ 13.823] Current Operating System: Linux harah 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 x86_64
[ 13.823] Kernel command line: root=/dev/disk/by-uuid/a8eaea92-ee81-4bb0-9bb8-6904e884df07 ro nomodesetting
[ 13.823] Build Date: 01 November 2010 10:29:19PM
[ 13.823]
[ 13.823] Current version of pixman: 0.20.0
[ 13.823] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.823] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.823] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 6 19:52:38 2010
[ 13.857] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.857] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.929] (==) ServerLayout "aticonfig Layout"
[ 13.929] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 13.929] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 13.930] (**) | |-->Device "aticonfig-Device[0]-0"
[ 13.930] (==) Automatically adding devices
[ 13.930] (==) Automatically enabling devices
[ 13.993] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.993] Entry deleted from font path.
[ 14.079] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 14.090] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 14.090] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14.090] (II) Loader magic: 0x7d3360
[ 14.090] (II) Module ABI versions:
[ 14.090] X.Org ANSI C Emulation: 0.4
[ 14.090] X.Org Video Driver: 8.0
[ 14.090] X.Org XInput driver : 11.0
[ 14.090] X.Org Server Extension : 4.0
[ 14.091] (--) PCI:*(0:1:0:0) 1002:9480:104d:9035 rev 0, Mem @ 0xc0000000/268435456, 0xd0020000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 14.091] (II) Open ACPI successful (/var/run/acpid.socket)
[ 14.091] (II) "extmod" will be loaded by default.
[ 14.091] (II) "dbe" will be loaded by default.
[ 14.091] (II) "glx" will be loaded by default.
[ 14.091] (II) "record" will be loaded by default.
[ 14.091] (II) "dri" will be loaded by default.
[ 14.091] (II) "dri2" will be loaded by default.
[ 14.091] (II) LoadModule: "extmod"
[ 14.284] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 14.296] (II) Module extmod: vendor="X.Org Foundation"
[ 14.296] compiled for 1.9.2, module version = 1.0.0
[ 14.296] Module class: X.Org Server Extension
[ 14.296] ABI class: X.Org Server Extension, version 4.0
[ 14.296] (II) Loading extension MIT-SCREEN-SAVER
[ 14.296] (II) Loading extension XFree86-VidModeExtension
[ 14.296] (II) Loading extension XFree86-DGA
[ 14.296] (II) Loading extension DPMS
[ 14.296] (II) Loading extension XVideo
[ 14.296] (II) Loading extension XVideo-MotionCompensation
[ 14.296] (II) Loading extension X-Resource
[ 14.296] (II) LoadModule: "dbe"
[ 14.296] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 14.310] (II) Module dbe: vendor="X.Org Foundation"
[ 14.310] compiled for 1.9.2, module version = 1.0.0
[ 14.310] Module class: X.Org Server Extension
[ 14.310] ABI class: X.Org Server Extension, version 4.0
[ 14.310] (II) Loading extension DOUBLE-BUFFER
[ 14.310] (II) LoadModule: "glx"
[ 14.310] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.332] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 14.334] compiled for 7.6.0, module version = 1.0.0
[ 14.334] (II) Loading extension GLX
[ 14.334] (II) LoadModule: "record"
[ 14.334] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 14.335] (II) Module record: vendor="X.Org Foundation"
[ 14.335] compiled for 1.9.2, module version = 1.13.0
[ 14.335] Module class: X.Org Server Extension
[ 14.335] ABI class: X.Org Server Extension, version 4.0
[ 14.335] (II) Loading extension RECORD
[ 14.335] (II) LoadModule: "dri"
[ 14.335] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 14.365] (II) Module dri: vendor="X.Org Foundation"
[ 14.365] compiled for 1.9.2, module version = 1.0.0
[ 14.365] ABI class: X.Org Server Extension, version 4.0
[ 14.365] (II) Loading extension XFree86-DRI
[ 14.365] (II) LoadModule: "dri2"
[ 14.366] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 14.366] (II) Module dri2: vendor="X.Org Foundation"
[ 14.366] compiled for 1.9.2, module version = 1.2.0
[ 14.366] ABI class: X.Org Server Extension, version 4.0
[ 14.366] (II) Loading extension DRI2
[ 14.366] (II) LoadModule: "fglrx"
[ 14.391] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 14.858] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 14.864] compiled for 1.4.99.906, module version = 8.79.4
[ 14.864] Module class: X.Org Video Driver
[ 14.868] (II) Loading sub module "fglrxdrm"
[ 14.868] (II) LoadModule: "fglrxdrm"
[ 14.868] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 14.893] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 14.893] compiled for 1.4.99.906, module version = 8.79.4
[ 14.893] (II) ATI Proprietary Linux Driver Version Identifier:8.79.4
[ 14.893] (II) ATI Proprietary Linux Driver Release Identifier: 8.791
[ 14.893] (II) ATI Proprietary Linux Driver Build Date: Oct 26 2010 22:57:54
[ 14.893] (++) using VT number 7
[ 14.894] (WW) Falling back to old probe method for fglrx
[ 15.013] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 15.025] (--) Chipset Supported AMD Graphics Processor (0x9480) found
[ 15.027] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 15.027] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 15.027] (II) AMD Video driver is signed
[ 15.027] (II) fglrx(0): pEnt->device->identifier=0x1382b40
[ 15.027] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
[ 15.028] (II) Loading sub module "vgahw"
[ 15.028] (II) LoadModule: "vgahw"
[ 15.028] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 15.042] (II) Module vgahw: vendor="X.Org Foundation"
[ 15.042] compiled for 1.9.2, module version = 0.1.0
[ 15.042] ABI class: X.Org Video Driver, version 8.0
[ 15.042] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 15.042] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 15.042] (==) fglrx(0): Default visual is TrueColor
[ 15.042] (**) fglrx(0): Option "DPMS" "true"
[ 15.042] (==) fglrx(0): RGB weight 888
[ 15.042] (II) fglrx(0): Using 8 bits per RGB
[ 15.042] (==) fglrx(0): Buffer Tiling is ON
[ 15.043] (II) Loading sub module "fglrxdrm"
[ 15.043] (II) LoadModule: "fglrxdrm"
[ 15.043] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 15.201] ukiDynamicMajor: found major device number 251
[ 15.201] ukiDynamicMajor: found major device number 251
[ 15.201] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 15.201] ukiOpenDevice: node name is /dev/ati/card0
[ 15.201] ukiOpenDevice: open result is 11, (OK)
[ 15.201] ukiOpenByBusid: ukiOpenMinor returns 11
[ 15.201] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 15.201] (==) fglrx(0): NoAccel = NO
[ 15.201] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 15.201] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4650" (Chipset = 0x9480)
[ 15.201] (--) fglrx(0): (PciSubVendor = 0x104d, PciSubDevice = 0x9035)
[ 15.201] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 15.201] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 15.201] (--) fglrx(0): MMIO registers at 0xd0020000
[ 15.201] (--) fglrx(0): I/O port at 0x0000d000
[ 15.201] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 15.225] (II) fglrx(0): AC Adapter is used
[ 15.269] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 15.352] (II) Loading sub module "vbe"
[ 15.352] (II) LoadModule: "vbe"
[ 15.353] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 15.367] (II) Module vbe: vendor="X.Org Foundation"
[ 15.368] compiled for 1.9.2, module version = 1.1.0
[ 15.368] ABI class: X.Org Video Driver, version 8.0
[ 15.368] (II) fglrx(0): VESA BIOS detected
[ 15.368] (II) fglrx(0): VESA VBE Version 3.0
[ 15.368] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 15.368] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 15.368] (II) fglrx(0): VESA VBE OEM Software Rev: 11.20
[ 15.368] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 15.368] (II) fglrx(0): VESA VBE OEM Product: M96
[ 15.368] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 15.408] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 15.408] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR3
[ 15.408] (II) fglrx(0): PCIE card detected
[ 15.408] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 15.408] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 15.410] (II) fglrx(0): Using adapter: 1:0.0.
[ 15.441] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 15.466] (II) fglrx(0): Interrupt handler installed at IRQ 45.
[ 15.466] (II) fglrx(0): RandR 1.2 support is enabled!
[ 15.466] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 15.466] (==) fglrx(0): Center Mode is disabled
[ 15.466] (II) Loading sub module "fb"
[ 15.466] (II) LoadModule: "fb"
[ 15.467] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.485] (II) Module fb: vendor="X.Org Foundation"
[ 15.485] compiled for 1.9.2, module version = 1.0.0
[ 15.485] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.485] (==) fglrx(0): Active stereo disabled
[ 15.485] (II) Loading sub module "ddc"
[ 15.485] (II) LoadModule: "ddc"
[ 15.485] (II) Module "ddc" already built-in
[ 16.276] (II) fglrx(0): Finished Initialize PPLIB!
[ 16.880] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 16.880] (II) fglrx(0): Output DFP1 has no monitor section
[ 16.880] (II) fglrx(0): Output CRT1 has no monitor section
[ 16.908] (II) Loading sub module "ddc"
[ 16.908] (II) LoadModule: "ddc"
[ 16.908] (II) Module "ddc" already built-in
[ 16.908] (II) fglrx(0): Connected Display0: LVDS
[ 16.908] (II) fglrx(0): Display0: Failed to get EDID information.
[ 17.262] (II) fglrx(0): Cannot get EDID information for LVDS
[ 17.277] (II) fglrx(0): Output LVDS connected
[ 17.277] (II) fglrx(0): Output DFP1 disconnected
[ 17.277] (II) fglrx(0): Output CRT1 disconnected
[ 17.277] (II) fglrx(0): Using exact sizes for initial modes
[ 17.277] (II) fglrx(0): Output LVDS using initial mode 1600x900
[ 17.277] (II) fglrx(0): DPI set to (96, 96)
[ 17.277] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4650 has 2 configurable heads and 1 displays connected.
[ 17.277] (==) fglrx(0): PseudoColor visuals disabled
[ 17.277] (II) Loading sub module "ramdac"
[ 17.277] (II) LoadModule: "ramdac"
[ 17.277] (II) Module "ramdac" already built-in
[ 17.278] (==) fglrx(0): NoDRI = NO
[ 17.278] (==) fglrx(0): Capabilities: 0x00000000
[ 17.278] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 17.278] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 17.278] (==) fglrx(0): UseFastTLS=0
[ 17.278] (==) fglrx(0): BlockSignalsOnLock=1
[ 17.278] (--) Depth 24 pixmap format is 32 bpp
[ 17.278] (II) Loading extension ATIFGLRXDRI
[ 17.278] (II) fglrx(0): doing swlDriScreenInit
[ 17.278] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 17.278] ukiDynamicMajor: found major device number 251
[ 17.278] ukiDynamicMajor: found major device number 251
[ 17.278] ukiDynamicMajor: found major device number 251
[ 17.278] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 17.278] ukiOpenDevice: node name is /dev/ati/card0
[ 17.278] ukiOpenDevice: open result is 16, (OK)
[ 17.278] ukiOpenByBusid: ukiOpenMinor returns 16
[ 17.278] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 17.278] (II) fglrx(0): [uki] DRM interface version 1.0
[ 17.278] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 17.278] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 17.278] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f30163fd000
[ 17.278] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 17.278] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 17.278] (II) fglrx(0): swlDriScreenInit done
[ 17.278] (II) fglrx(0): Kernel Module Version Information:
[ 17.278] (II) fglrx(0): Name: fglrx
[ 17.278] (II) fglrx(0): Version: 8.79.4
[ 17.278] (II) fglrx(0): Date: Oct 26 2010
[ 17.278] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 17.278] (II) fglrx(0): Kernel Module version matches driver.
[ 17.278] (II) fglrx(0): Kernel Module Build Time Information:
[ 17.278] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.36-ARCH
[ 17.278] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 17.278] (II) fglrx(0): Build-Kernel __SMP__: no
[ 17.278] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 17.278] (II) fglrx(0): [uki] register handle = 0x00004000
[ 17.326] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
[ 17.326] (II) fglrx(0): DRI initialization successfull
[ 17.326] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010a8000
[ 17.351] (II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624)
[ 17.351] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption)
[ 17.351] (II) fglrx(0): Largest offscreen area available: 1664 x 960
[ 17.355] (==) fglrx(0): Backing store disabled
[ 17.355] (II) Loading extension FGLRXEXTENSION
[ 17.355] (**) fglrx(0): DPMS enabled
[ 17.355] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 17.355] (**) fglrx(0): Textured Video is enabled.
[ 17.355] (II) LoadModule: "glesx"
[ 17.355] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 17.801] (II) Module glesx: vendor="X.Org Foundation"
[ 17.801] compiled for 1.4.99.906, module version = 1.0.0
[ 17.801] (II) Loading extension GLESX
[ 17.801] (II) fglrx(0): GLESX enableFlags = 528
[ 17.829] (II) fglrx(0): GLESX is enabled
[ 17.829] (II) fglrx(0): Acceleration enabled
[ 17.829] (II) LoadModule: "amdxmm"
[ 17.860] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 17.924] (II) Module amdxmm: vendor="X.Org Foundation"
[ 17.924] compiled for 1.8.99.905, module version = 1.0.0
[ 17.924] (II) Loading extension AMDXVOPL
[ 17.924] (II) Loading extension AMDXVBA
[ 17.943] (II) fglrx(0): UVD feature is enabled
[ 17.945] (II) fglrx(0): Enable composite support successfully
[ 17.945] (WW) fglrx(0): Option "VendorName" is not used
[ 17.945] (WW) fglrx(0): Option "ModelName" is not used
[ 17.945] (II) fglrx(0): X context handle = 0x1
[ 17.945] (II) fglrx(0): [DRI] installation complete
[ 17.945] (==) fglrx(0): Silken mouse enabled
[ 17.994] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 17.994] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 17.994] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 17.994] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 19.414] (--) RandR disabled
[ 19.414] (II) Initializing built-in extension Generic Event Extension
[ 19.414] (II) Initializing built-in extension SHAPE
[ 19.414] (II) Initializing built-in extension MIT-SHM
[ 19.414] (II) Initializing built-in extension XInputExtension
[ 19.414] (II) Initializing built-in extension XTEST
[ 19.414] (II) Initializing built-in extension BIG-REQUESTS
[ 19.415] (II) Initializing built-in extension SYNC
[ 19.415] (II) Initializing built-in extension XKEYBOARD
[ 19.415] (II) Initializing built-in extension XC-MISC
[ 19.415] (II) Initializing built-in extension SECURITY
[ 19.415] (II) Initializing built-in extension XINERAMA
[ 19.415] (II) Initializing built-in extension XFIXES
[ 19.415] (II) Initializing built-in extension RENDER
[ 19.415] (II) Initializing built-in extension RANDR
[ 19.415] (II) Initializing built-in extension COMPOSITE
[ 19.415] (II) Initializing built-in extension DAMAGE
[ 19.416] ukiDynamicMajor: found major device number 251
[ 19.417] ukiDynamicMajor: found major device number 251
[ 19.417] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 19.417] ukiOpenDevice: node name is /dev/ati/card0
[ 19.417] ukiOpenDevice: open result is 17, (OK)
[ 19.417] ukiOpenByBusid: ukiOpenMinor returns 17
[ 19.417] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 20.423]
Backtrace:
[ 20.553] 0: /usr/bin/X (xorg_backtrace+0x28) [0x49f1a8]
[ 20.553] 1: /usr/bin/X (0x400000+0x60239) [0x460239]
[ 20.553] 2: /lib/libpthread.so.0 (0x7f30158e9000+0xf1c0) [0x7f30158f81c0]
[ 20.553] 3: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x133d3bd) [0x7f300efcb3bd]
[ 20.553] 4: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x133e0ad) [0x7f300efcc0ad]
[ 20.553] 5: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x133e776) [0x7f300efcc776]
[ 20.553] 6: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x1399111) [0x7f300f027111]
[ 20.553] 7: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x1393dbe) [0x7f300f021dbe]
[ 20.553] 8: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x11e9e74) [0x7f300ee77e74]
[ 20.553] 9: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x11da94b) [0x7f300ee6894b]
[ 20.553] 10: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x1332d9) [0x7f300ddc12d9]
[ 20.553] 11: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x9c3dc4) [0x7f300e651dc4]
[ 20.553] 12: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f300dc8e000+0x9c3f20) [0x7f300e651f20]
[ 20.553] 13: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (__driCreateNewScreen_20050727+0x999) [0x7f300efcedb9]
[ 20.553] 14: /usr/lib/xorg/modules/extensions/libglx.so (0x7f3013776000+0x1ab47) [0x7f3013790b47]
[ 20.553] 15: /usr/lib/xorg/modules/extensions/libglx.so (0x7f3013776000+0x1c2a5) [0x7f30137922a5]
[ 20.553] 16: /usr/bin/X (InitExtensions+0x91) [0x484711]
[ 20.553] 17: /usr/bin/X (0x400000+0x21133) [0x421133]
[ 20.553] 18: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f301486ec4d]
[ 20.553] 19: /usr/bin/X (0x400000+0x20e79) [0x420e79]
[ 20.554] Floating point exception at address 0x7f300efcb3bd
[ 20.554]
Fatal server error:
[ 20.554] Caught signal 8 (Floating point exception). Server aborting
[ 20.554]
[ 20.554]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 20.554] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 20.554]
[ 20.554] (II) fglrx(0): Backup framebuffer data.
[ 20.555] (II) fglrx(0): Backup complete.
My xorg.conf file (generated by aticonfig --initial)
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
And my lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M96 [Mobility Radeon HD 4650]
01:00.1 Audio device: ATI Technologies Inc RV710/730
06:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
08:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 14)
0a:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0a:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0a:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
Relevant line is:
01:00.0 VGA compatible controller: ATI Technologies Inc M96 [Mobility Radeon HD 4650]
Any help would be greatly appreciated.
I also tried disabling dri in xorg.conf, since dri appears in the backtrace for the error. That resulted in a segfault coming from something related to gl, so I disabled all acceleration, and got a black screen.
Thanks!

Was there a kernel update in a recent upgrade? If so, you need to rebuild the catalyst drivers.

[SOLVED] Missing xorg packages

Hi guys,
I am following the Beginner's guide on the wiki, and stuck at the "Install X" point, because apparently, a couple of packages are missing in the repo. I have tried several mirrors, that are according to the mirror list 100% up to date, but same result.
Install command (as in the guide):
pacman -S xorg-server xorg-xinit xorg-utils xorg-server-utils
Result (this is a second attempt, the first attempt downloaded all the other packages just fine):
http://dl.dropbox.com/u/20678367/arch-m … ckages.png
Mod edit: The image you posted is too big, see our Forum Etiquette.
Apparently the missing packages are:
xkeyboard-config-2.2.1-1-any
xorg-server-common-1.10.4-1-i686
xf86-input-evdev-2.6.0-3-i686
xorg-server-1.10.4-1-i686
xorg-xinit-1.3.0-3-i686
What's the deal here?
Last edited by bernarcher (2011-10-12 09:36:26)

junkie wrote:
wonder wrote:pacman -Syu xorg-server xorg-xinit xorg-utils xorg-server-utils
Well, pacman -Syu worked. I must be _really_ unlucky, I just did a -Syu last night, I think I'll have to add the "y" to every install from now on just in case
Thanks!
yes, xorg-server 1.11 was moved last night

Slow down in X after kernel and xorg packages updated

Just upgraded to the latest kernel and xorg with the following packages and X has taken a nose dive and slowed down drastically:
kernelcairo-1.10.0-2 kernel26-2.6.35.7-1
mesa-7.8.2-3 nss-3.12.8-1 xf86-input-evdev-2.5.0-1
xf86-video-nv-2.1.18-1 xf86-video-vesa-2.3.0-3
xkeyboard-config-1.9-1 xorg-server-common-1.9.0-1
xorg-server-1.9.0-1 xterm-262-1
Tried reinstalling nvidia, but no help there. Reverting to the previous packages made things good again.
Anyone else experiencing this?

I can confirm nVidia's driver version '260.19.06' fixes this render lag.
This version is available in the AUR
remember to exit xorg and remove the old module after installing
# rmmod nvidia
Last edited by gav616 (2010-10-07 17:05:17)

[SOLVED] Xorg upgrade + Catalyst = not working

After my last upgrade Catalyst does not work anymore. Is it posible to downgrade Xorg to older version? I tried adding:
[xorg111]
Server = http://catalyst.apocalypsus.net/repo/xorg111/$arch
...to pacman.conf but when i tried to install catalyst i get only this:
:: xorg-server and xf86-input-evdev are in conflict. Remove xf86-input-evdev? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: xorg-server: requires xf86-input-evdev
Any thoughts?
Last edited by tomek@vz (2012-03-17 20:20:55)

mundigranja wrote:
Is it the Xorg111 repository above all others? If so, perhaps you have to refresh:
# pacman -Syy
# pacman -Suu
I screwed up - i placed xorg repo at the bottom. I put it above [core] and now it works Thanks

Where can I find the entire group of xorg packages older version?

My video card, the matrox g450 hasn't been working with newer versions of xorg. I know it worked back in October when I used it.
I see http://arm.nrk.cc but there are currently 65 packages within xorg. Is there some place that would just have a folder of just those ~65 packages and I could just tell it to download every package, and then install each package, instead of manually going through each package downloading what I need?
Thanks.

The oldest you can get (without some user actively creating a repo for you) is by looking at http://users.archlinux.de/~gerbra/mirrorcheck.html finding a mirror that hasn't synced in a while, use that in your mirrorlist, then sync and 'update'.

Catalyst 10.2 on Ati HD 5450 not working

Hi all!
I have a problem with catalyst from ati.amd.com
After boot black screen with a cursor
xorg.conf
# Auto-generated by Archie mkxcfg
# Auto-generated by Archie mkxcfg
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
#Additional fonts: Locale, Gimp, TTF...
#FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
#FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
#Load "synaptics"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
#Load "record"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section
"DRI"
Mode 0666
EndSection
Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux n22-192-138 2.6.32-ARCH #1 SMP PREEMPT Tue Feb 23 19:24:08 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/1c906e0a-6e44-4162-b3b3-00b5e5353eb5 ro
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:12:39 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]-0"
(**) | |-->Device "aticonfig-Device[0]-0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) Loader magic: 0x81e4c40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 1002:68f9:1787:2291 ATI Technologies Inc rev 0, Mem @ 0xd0000000/268435456, 0xfdcc0000/131072, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
dlopen: /usr/lib/xorg/modules/drivers/fglrx_drv.so: undefined symbol: UpdateSpriteForScreen
(EE) Failed to load /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) UnloadModule: "fglrx"
(EE) Failed to load module "fglrx" (loader failed, 7)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

22391 wrote:(EE) Failed to load module "fglrx" (loader failed, 7)
(EE) No drivers available.
fglrx is missing.
Try aur package catalyst 10.3
Then remove you xorg and recreate it with
aticonfig --initial
Remember to add fglrx to modules list

What's wrong with my xorg.conf?

I just installed Arch + KDEmod and I think I'd like it, but I can't get any video driver to work correctly. The open-source ati driver crashes immediately (just like in Ubuntu, I could never get that one to work) so I'm trying to catalyst drivers. However, it can't go to GUI at all; it gives me an error about no available screens or something. I looked at my xorg.conf and it looks okay... what's the problem?
Radeon 9500 Pro, btw. xorg configured with Xorg -configure
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "record"
Load "glx"
Load "extmod"
Load "GLcore"
Load "xtrap"
Load "dbe"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "NoDRI" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "DRM_nbufs" # 
#Option "DRM_bufsize" # 
#Option "Capabilities" # 
#Option "CapabilitiesEx" # 
#Option "ClientDriverName" # [<str>]
#Option "KernelModuleParm" # [<str>]
#Option "AGPMask" # 
#Option "AGPv3Mask" # 
#Option "BufferTiling" # [<bool>]
#Option "Profile" # <str>
#Option "RingSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "GammaCorrectionI" # 
#Option "GammaCorrectionII" # 
#Option "OpenGLOverlay" # [<bool>]
#Option "DefaultVisualTrueColor" # [<bool>]
#Option "VideoOverlay" # [<bool>]
#Option "DesktopSetup" # [<str>]
#Option "MonitorLayout" # [<str>]
#Option "ForceMonitors" # [<str>]
#Option "EnableMonitor" # <str>
#Option "OverlayOnCRTC2" # [<bool>]
#Option "Mode2" # [<str>]
#Option "PairModes" # [<str>]
#Option "HSync2" # [<str>]
#Option "VRefresh2" # [<str>]
#Option "ScreenOverlap" # 
#Option "MemClock" # 
#Option "ASICClock" # 
#Option "UseInternalAGPGART" # [<bool>]
#Option "FastSwap" # [<bool>]
#Option "Stereo" # [<bool>]
#Option "StereoSyncEnable" # 
#Option "DisableOvScaler" # [<bool>]
#Option "UseFastTLS" # 
#Option "BlockSignalsOnLock" # [<bool>]
#Option "ForceGenericCPU" # [<bool>]
#Option "CenterMode" # [<bool>]
#Option "OffScreenPixmaps" # [<bool>]
#Option "EnableOpaqueOverlayVisual" # [<bool>]
#Option "TMDSCoherentMode" # [<bool>]
#Option "EnablePrivateBackZ" # [<bool>]
#Option "TVFormat" # [<str>]
#Option "TVStandard" # [<str>]
#Option "TVOverscan" # [<bool>]
#Option "TVHSizeAdj" # 
#Option "TVVSizeAdj" # 
#Option "TVHPosAdj" # 
#Option "TVVPosAdj" # 
#Option "TVHStartAdj" # 
#Option "TVColorAdj" # 
#Option "PseudoColorVisuals" # [<bool>]
#Option "PreferredVRefresh" # 
#Option "FastStart" # [<bool>]
#Option "ProfileDriver" # [<bool>]
#Option "PPPTforGART" # [<bool>]
#Option "TexturedVideo" # [<bool>]
#Option "TexturedVideoSync" # [<bool>]
#Option "Textured2D" # [<bool>]
#Option "TexturedXrender" # [<bool>]
#Option "DPMS" # [<bool>]
#Option "MaxGARTSize" # 
#Option "LogoPosX" # 
#Option "LogoPosY" # 
#Option "LogoColFG" # 
#Option "LogoColBG" # 
#Option "SwapScreens" # [<bool>]
#Option "FBC" # [<bool>]
#Option "FrontBufferMode" # 
#Option "BackBufferMode" # 
#Option "DepthBufferMode" # 
#Option "OverlayBufferMode" # 
#Option "VideoOverlayBufferMode" # 
#Option "EnableIrqMgr" # [<bool>]
#Option "EnableMulticard" # [<bool>]
#Option "EnablePPLIB" # [<bool>]
#Option "DefaultOnDC" # [<bool>]
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "Radeon R300 NE [Radeon 9500 Pro]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Heres my, maybe it can help you out somehow:
# xorg.conf (xorg X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Module"
Load "dri"
Load "v4i"
Load "dbe"
Load "glx"
Load "synaptics"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/misc/"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "no"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "XAANoOffscreenPixmaps" "on"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 30-70
VertRefresh 50-160
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
EndSection
Section "ServerLayout"
Option "AIGLX" "on"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "XVideo" "Enable"
EndSection

Real trouble trying to install Catalyst Legacy

I'm kind of in trouble trying to install catalyst-total-hd234k package from the AUR
using yaourt to achieve this, enabled the xorg112 package to downgrade, tried pacman directly and makepkg, same result
It asks a lot of dependencies conflicting with catalyst drivers, so I accept to remove before downgrading to 1.12
It goes through like if nothing was up after downgrading, package installs without any error
Following the AMD Catalyst wiki page in here leads me to have a black screen after reboot
EDIT 2: Process of reproducing the problem I'm facing
- I enable the xorg112 repository on top of every other in /etc/pacman.conf
- Downgrade xorg with
# pacman -S xorg
:: There are 79 members in group xorg:
:: Repository xorg112
1) xf86-input-acecad 2) xf86-input-aiptek 3) xf86-input-evdev 4) xf86-input-joystick 5) xf86-input-keyboard 6) xf86-input-mouse 7) xf86-input-synaptics
8) xf86-input-vmmouse 9) xf86-input-void 10) xf86-video-apm 11) xf86-video-fbdev 12) xf86-video-intel 13) xf86-video-v4l 14) xf86-video-vesa
:: Repository extra
15) xf86-video-ark 16) xf86-video-ast 17) xf86-video-ati 18) xf86-video-cirrus 19) xf86-video-dummy 20) xf86-video-glint 21) xf86-video-i128
22) xf86-video-mach64 23) xf86-video-mga 24) xf86-video-modesetting 25) xf86-video-neomagic 26) xf86-video-nouveau 27) xf86-video-nv 28) xf86-video-openchrome
29) xf86-video-r128 30) xf86-video-savage 31) xf86-video-siliconmotion 32) xf86-video-sis 33) xf86-video-tdfx 34) xf86-video-trident 35) xf86-video-vmware
36) xf86-video-voodoo 37) xorg-bdftopcf 38) xorg-docs 39) xorg-font-util 40) xorg-fonts-100dpi 41) xorg-fonts-75dpi 42) xorg-fonts-encodings 43) xorg-iceauth
44) xorg-luit 45) xorg-mkfontdir 46) xorg-mkfontscale 47) xorg-server 48) xorg-sessreg 49) xorg-setxkbmap 50) xorg-smproxy 51) xorg-x11perf 52) xorg-xauth
53) xorg-xbacklight 54) xorg-xcmsdb 55) xorg-xcursorgen 56) xorg-xdpyinfo 57) xorg-xdriinfo 58) xorg-xev 59) xorg-xgamma 60) xorg-xhost 61) xorg-xinput
62) xorg-xkbcomp 63) xorg-xkbevd 64) xorg-xkbutils 65) xorg-xkill 66) xorg-xlsatoms 67) xorg-xlsclients 68) xorg-xmodmap 69) xorg-xpr 70) xorg-xprop
71) xorg-xrandr 72) xorg-xrdb 73) xorg-xrefresh 74) xorg-xset 75) xorg-xsetroot 76) xorg-xvinfo 77) xorg-xwd 78) xorg-xwininfo 79) xorg-xwud
Enter a selection (default=all):
warning: downgrading package xf86-input-evdev (2.9.1-1 => 2.7.3-1)
warning: downgrading package xf86-input-joystick (1.6.2-5 => 1.6.1-1)
warning: downgrading package xf86-input-keyboard (1.8.0-3 => 1.6.2-1)
warning: downgrading package xf86-input-mouse (1.9.1-1 => 1.8.1-1)
warning: downgrading package xf86-input-synaptics (1.8.1-1 => 1.6.2-1)
warning: downgrading package xf86-input-vmmouse (13.0.0-5 => 12.9.0-1)
warning: downgrading package xf86-input-void (1.4.0-7 => 1.4.0-3)
warning: downgrading package xf86-video-fbdev (0.4.4-3 => 0.4.3-1)
warning: downgrading package xf86-video-intel (2.99.917-1 => 2.20.2-2)
warning: downgrading package xf86-video-v4l (0.2.0-14 => 0.2.0-10)
warning: downgrading package xf86-video-vesa (2.3.2-5 => 2.3.2-1)
warning: xf86-video-ark-0.7.5-5 is up to date -- reinstalling
warning: xf86-video-ast-0.97.0-5 is up to date -- reinstalling
warning: xf86-video-ati-1:7.5.0-1 is up to date -- reinstalling
warning: xf86-video-cirrus-1.5.2-4 is up to date -- reinstalling
warning: xf86-video-dummy-0.3.7-3 is up to date -- reinstalling
warning: xf86-video-glint-1.2.8-5 is up to date -- reinstalling
warning: xf86-video-i128-1.3.6-5 is up to date -- reinstalling
warning: xf86-video-mach64-6.9.4-4 is up to date -- reinstalling
warning: xf86-video-mga-1.6.3-3 is up to date -- reinstalling
warning: xf86-video-modesetting-0.9.0-2 is up to date -- reinstalling
warning: xf86-video-neomagic-1.2.8-3 is up to date -- reinstalling
warning: xf86-video-nouveau-1.0.11-2 is up to date -- reinstalling
warning: xf86-video-nv-2.1.20-5 is up to date -- reinstalling
warning: xf86-video-openchrome-0.3.3-4 is up to date -- reinstalling
warning: xf86-video-r128-6.9.2-3 is up to date -- reinstalling
warning: xf86-video-savage-2.3.7-3 is up to date -- reinstalling
warning: xf86-video-siliconmotion-1.7.7-5 is up to date -- reinstalling
warning: xf86-video-sis-0.10.7-6 is up to date -- reinstalling
warning: xf86-video-tdfx-1.4.5-5 is up to date -- reinstalling
warning: xf86-video-trident-1.3.6-6 is up to date -- reinstalling
warning: xf86-video-vmware-13.0.2-2 is up to date -- reinstalling
warning: xf86-video-voodoo-1.2.5-5 is up to date -- reinstalling
warning: xorg-bdftopcf-1.0.5-1 is up to date -- reinstalling
warning: xorg-docs-1.7-2 is up to date -- reinstalling
warning: xorg-font-util-1.3.0-2 is up to date -- reinstalling
warning: xorg-fonts-100dpi-1.0.3-2 is up to date -- reinstalling
warning: xorg-fonts-75dpi-1.0.3-2 is up to date -- reinstalling
warning: xorg-fonts-encodings-1.0.4-4 is up to date -- reinstalling
warning: xorg-iceauth-1.0.6-1 is up to date -- reinstalling
warning: xorg-luit-1.1.1-2 is up to date -- reinstalling
warning: xorg-mkfontdir-1.0.7-2 is up to date -- reinstalling
warning: xorg-mkfontscale-1.1.1-1 is up to date -- reinstalling
warning: xorg-server-1.16.3-2 is up to date -- reinstalling
warning: xorg-sessreg-1.0.8-2 is up to date -- reinstalling
warning: xorg-setxkbmap-1.3.0-2 is up to date -- reinstalling
warning: xorg-smproxy-1.0.5-2 is up to date -- reinstalling
warning: xorg-x11perf-1.5.4-2 is up to date -- reinstalling
warning: xorg-xauth-1.0.9-1 is up to date -- reinstalling
warning: xorg-xbacklight-1.2.1-1 is up to date -- reinstalling
warning: xorg-xcmsdb-1.0.4-2 is up to date -- reinstalling
warning: xorg-xcursorgen-1.0.6-1 is up to date -- reinstalling
warning: xorg-xdpyinfo-1.3.1-1 is up to date -- reinstalling
warning: xorg-xdriinfo-1.0.4-4 is up to date -- reinstalling
warning: xorg-xev-1.2.1-2 is up to date -- reinstalling
warning: xorg-xgamma-1.0.5-2 is up to date -- reinstalling
warning: xorg-xhost-1.0.6-1 is up to date -- reinstalling
warning: xorg-xinput-1.6.1-1 is up to date -- reinstalling
warning: xorg-xkbcomp-1.3.0-1 is up to date -- reinstalling
warning: xorg-xkbevd-1.1.3-2 is up to date -- reinstalling
warning: xorg-xkbutils-1.0.4-2 is up to date -- reinstalling
warning: xorg-xkill-1.0.4-1 is up to date -- reinstalling
warning: xorg-xlsatoms-1.1.1-2 is up to date -- reinstalling
warning: xorg-xlsclients-1.1.3-1 is up to date -- reinstalling
warning: xorg-xmodmap-1.0.8-1 is up to date -- reinstalling
warning: xorg-xpr-1.0.4-2 is up to date -- reinstalling
warning: xorg-xprop-1.2.2-1 is up to date -- reinstalling
warning: xorg-xrandr-1.4.3-1 is up to date -- reinstalling
warning: xorg-xrdb-1.1.0-1 is up to date -- reinstalling
warning: xorg-xrefresh-1.0.5-1 is up to date -- reinstalling
warning: xorg-xset-1.2.3-1 is up to date -- reinstalling
warning: xorg-xsetroot-1.1.1-2 is up to date -- reinstalling
warning: xorg-xvinfo-1.1.2-2 is up to date -- reinstalling
warning: xorg-xwd-1.0.6-1 is up to date -- reinstalling
warning: xorg-xwininfo-1.1.3-1 is up to date -- reinstalling
warning: xorg-xwud-1.0.4-2 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Packages (79) xf86-input-acecad-1.5.0-3 xf86-input-aiptek-1.4.1-3 xf86-input-evdev-2.7.3-1 xf86-input-joystick-1.6.1-1 xf86-input-keyboard-1.6.2-1
xf86-input-mouse-1.8.1-1 xf86-input-synaptics-1.6.2-1 xf86-input-vmmouse-12.9.0-1 xf86-input-void-1.4.0-3 xf86-video-apm-1.2.5-1
xf86-video-ark-0.7.5-5 xf86-video-ast-0.97.0-5 xf86-video-ati-1:7.5.0-1 xf86-video-cirrus-1.5.2-4 xf86-video-dummy-0.3.7-3 xf86-video-fbdev-0.4.3-1
xf86-video-glint-1.2.8-5 xf86-video-i128-1.3.6-5 xf86-video-intel-2.20.2-2 xf86-video-mach64-6.9.4-4 xf86-video-mga-1.6.3-3
xf86-video-modesetting-0.9.0-2 xf86-video-neomagic-1.2.8-3 xf86-video-nouveau-1.0.11-2 xf86-video-nv-2.1.20-5 xf86-video-openchrome-0.3.3-4
xf86-video-r128-6.9.2-3 xf86-video-savage-2.3.7-3 xf86-video-siliconmotion-1.7.7-5 xf86-video-sis-0.10.7-6 xf86-video-tdfx-1.4.5-5
xf86-video-trident-1.3.6-6 xf86-video-v4l-0.2.0-10 xf86-video-vesa-2.3.2-1 xf86-video-vmware-13.0.2-2 xf86-video-voodoo-1.2.5-5
xorg-bdftopcf-1.0.5-1 xorg-docs-1.7-2 xorg-font-util-1.3.0-2 xorg-fonts-100dpi-1.0.3-2 xorg-fonts-75dpi-1.0.3-2 xorg-fonts-encodings-1.0.4-4
xorg-iceauth-1.0.6-1 xorg-luit-1.1.1-2 xorg-mkfontdir-1.0.7-2 xorg-mkfontscale-1.1.1-1 xorg-server-1.16.3-2 xorg-sessreg-1.0.8-2
xorg-setxkbmap-1.3.0-2 xorg-smproxy-1.0.5-2 xorg-x11perf-1.5.4-2 xorg-xauth-1.0.9-1 xorg-xbacklight-1.2.1-1 xorg-xcmsdb-1.0.4-2
xorg-xcursorgen-1.0.6-1 xorg-xdpyinfo-1.3.1-1 xorg-xdriinfo-1.0.4-4 xorg-xev-1.2.1-2 xorg-xgamma-1.0.5-2 xorg-xhost-1.0.6-1 xorg-xinput-1.6.1-1
xorg-xkbcomp-1.3.0-1 xorg-xkbevd-1.1.3-2 xorg-xkbutils-1.0.4-2 xorg-xkill-1.0.4-1 xorg-xlsatoms-1.1.1-2 xorg-xlsclients-1.1.3-1
xorg-xmodmap-1.0.8-1 xorg-xpr-1.0.4-2 xorg-xprop-1.2.2-1 xorg-xrandr-1.4.3-1 xorg-xrdb-1.1.0-1 xorg-xrefresh-1.0.5-1 xorg-xset-1.2.3-1
xorg-xsetroot-1.1.1-2 xorg-xvinfo-1.1.2-2 xorg-xwd-1.0.6-1 xorg-xwininfo-1.1.3-1 xorg-xwud-1.0.4-2
Total Installed Size: 36.11 MiB
Net Upgrade Size: -0.52 MiB
:: Proceed with installation? [Y/n] Y
(79/79) checking keys in keyring [############################################################] 100%
(79/79) checking package integrity [############################################################] 100%
(79/79) loading package files [############################################################] 100%
(79/79) checking for file conflicts [############################################################] 100%
(79/79) checking available disk space [############################################################] 100%
( 1/79) installing xf86-input-acecad [############################################################] 100%
( 2/79) installing xf86-input-aiptek [############################################################] 100%
( 3/79) downgrading xf86-input-evdev [############################################################] 100%
( 4/79) downgrading xf86-input-joystick [############################################################] 100%
( 5/79) downgrading xf86-input-keyboard [############################################################] 100%
( 6/79) downgrading xf86-input-mouse [############################################################] 100%
( 7/79) downgrading xf86-input-synaptics [############################################################] 100%
( 8/79) downgrading xf86-input-vmmouse [############################################################] 100%
( 9/79) downgrading xf86-input-void [############################################################] 100%
(10/79) installing xf86-video-apm [############################################################] 100%
(11/79) downgrading xf86-video-fbdev [############################################################] 100%
(12/79) downgrading xf86-video-intel [############################################################] 100%
(13/79) downgrading xf86-video-v4l [############################################################] 100%
(14/79) downgrading xf86-video-vesa [############################################################] 100%
(15/79) reinstalling xf86-video-ark [############################################################] 100%
(16/79) reinstalling xf86-video-ast [############################################################] 100%
(17/79) reinstalling xf86-video-ati [############################################################] 100%
(18/79) reinstalling xf86-video-cirrus [############################################################] 100%
(19/79) reinstalling xf86-video-dummy [############################################################] 100%
(20/79) reinstalling xf86-video-glint [############################################################] 100%
(21/79) reinstalling xf86-video-i128 [############################################################] 100%
(22/79) reinstalling xf86-video-mach64 [############################################################] 100%
(23/79) reinstalling xf86-video-mga [############################################################] 100%
(24/79) reinstalling xf86-video-modesetting [############################################################] 100%
(25/79) reinstalling xf86-video-neomagic [############################################################] 100%
(26/79) reinstalling xf86-video-nouveau [############################################################] 100%
(27/79) reinstalling xf86-video-nv [############################################################] 100%
(28/79) reinstalling xf86-video-openchrome [############################################################] 100%
(29/79) reinstalling xf86-video-r128 [############################################################] 100%
(30/79) reinstalling xf86-video-savage [############################################################] 100%
(31/79) reinstalling xf86-video-siliconmotion [############################################################] 100%
(32/79) reinstalling xf86-video-sis [############################################################] 100%
(33/79) reinstalling xf86-video-tdfx [############################################################] 100%
(34/79) reinstalling xf86-video-trident [############################################################] 100%
(35/79) reinstalling xf86-video-vmware [############################################################] 100%
(36/79) reinstalling xf86-video-voodoo [############################################################] 100%
(37/79) reinstalling xorg-bdftopcf [############################################################] 100%
(38/79) reinstalling xorg-docs [############################################################] 100%
(39/79) reinstalling xorg-font-util [############################################################] 100%
(40/79) reinstalling xorg-fonts-encodings [############################################################] 100%
(41/79) reinstalling xorg-mkfontscale [############################################################] 100%
(42/79) reinstalling xorg-mkfontdir [############################################################] 100%
(43/79) reinstalling xorg-fonts-100dpi [############################################################] 100%
Updating font cache... done.
(44/79) reinstalling xorg-fonts-75dpi [############################################################] 100%
Updating font cache... done.
(45/79) reinstalling xorg-iceauth [############################################################] 100%
(46/79) reinstalling xorg-luit [############################################################] 100%
(47/79) reinstalling xorg-setxkbmap [############################################################] 100%
(48/79) reinstalling xorg-xkbcomp [############################################################] 100%
(49/79) reinstalling xorg-server [############################################################] 100%
(50/79) reinstalling xorg-sessreg [############################################################] 100%
(51/79) reinstalling xorg-smproxy [############################################################] 100%
(52/79) reinstalling xorg-x11perf [############################################################] 100%
(53/79) reinstalling xorg-xauth [############################################################] 100%
(54/79) reinstalling xorg-xbacklight [############################################################] 100%
(55/79) reinstalling xorg-xcmsdb [############################################################] 100%
(56/79) reinstalling xorg-xcursorgen [############################################################] 100%
(57/79) reinstalling xorg-xdpyinfo [############################################################] 100%
(58/79) reinstalling xorg-xdriinfo [############################################################] 100%
(59/79) reinstalling xorg-xev [############################################################] 100%
(60/79) reinstalling xorg-xgamma [############################################################] 100%
(61/79) reinstalling xorg-xhost [############################################################] 100%
(62/79) reinstalling xorg-xrandr [############################################################] 100%
(63/79) reinstalling xorg-xinput [############################################################] 100%
(64/79) reinstalling xorg-xkbevd [############################################################] 100%
(65/79) reinstalling xorg-xkbutils [############################################################] 100%
(66/79) reinstalling xorg-xkill [############################################################] 100%
(67/79) reinstalling xorg-xlsatoms [############################################################] 100%
(68/79) reinstalling xorg-xlsclients [############################################################] 100%
(69/79) reinstalling xorg-xmodmap [############################################################] 100%
(70/79) reinstalling xorg-xpr [############################################################] 100%
(71/79) reinstalling xorg-xprop [############################################################] 100%
(72/79) reinstalling xorg-xrdb [############################################################] 100%
(73/79) reinstalling xorg-xrefresh [############################################################] 100%
(74/79) reinstalling xorg-xset [############################################################] 100%
(75/79) reinstalling xorg-xsetroot [############################################################] 100%
(76/79) reinstalling xorg-xvinfo [############################################################] 100%
(77/79) reinstalling xorg-xwd [############################################################] 100%
(78/79) reinstalling xorg-xwininfo [############################################################] 100%
(79/79) reinstalling xorg-xwud [############################################################] 100%
- Then I use yaourt (for convenience) to install catalyst-total-hd234k, same happens with catalyst packages when I use catalyst-hd234k repository
$ yaourt -S catalyst-total-hd234k
==> Downloading catalyst-total-hd234k PKGBUILD from AUR...
x .SRCINFO
x catalyst-total-hd234k.install
x fglrx_gpl_symbol.patch
x cold-fglrx-3.14-current_euid.patch
x arch_3.13_kernel_acpi_node.patch
x lano1106_kcl_agp_13_4.patch
x lano1106_fglrx_intel_iommu.patch
x foutrelis_3.10_fix_for_legacy.patch
x gentoo_linux-3.10-proc.diff
x arch-fglrx-3.8.patch
x arch-fglrx-3.7.patch
x 3.5-do_mmap.patch
x catalyst-hook.service
x makefile_compat.patch
x ati_make.sh
x hook-fglrx
x arch-fglrx-authatieventsd_new.patch
x catalyst.conf
x atieventsd.service
x atieventsd.sh
x catalyst.sh
x lib32-catalyst.sh
x catalyst_build_module
x PKGBUILD
Comment by Vi0L0 (2014-10-09 18:40)
let me paste form the grill:
I'm pretty sure that you didn't update catalyst-total-hd234k to version 13.1-28, because there I fixed conflict with ati-dri.
Comment by doblerone (2014-12-17 19:15)
During the last update, apparently there are some conflicts between catalyst-libgl and catalyst-total-hd234k. The suggestion is to remove catalyst-total-hd234k.
Comment by Vi0L0 (2014-12-18 08:14)
You are probably using libva-xvba-drivers which from yesterday depend on catalyst-libgl, i will add it to provides array after getting back home
Comment by Vi0L0 (2014-12-18 21:50)
13.1-29:
- added catalyst-libgl, opencl-catalyst, lib32-catalyst-libgl and lib32-opencl-catalyst into provides array to satisfy libva-xvba-driver (and maybe other that will come in the future) deps;
- added linux 3.18 support (i cannot test it actually, i can see it compiles fine though)
Comment by K3pler (2015-01-05 12:43)
Planning to replace my ultra outdated x1950pro for a less outdated hd3870 lol.
And using this driver i probably need to downgrade xorg-server from 1.16 to 1.12 from the aur, right???
Thanks for your work VioLO
catalyst-total-hd234k 13.1-29 (mar jun 12 10:59:12 CST 2012)
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> WARNING: x86_64 system detected
==> WARNING: [multilib] repository must be uncommented in /etc/pacman.conf to add lib32-catalyst-utils into the package
==> WARNING: OK, lib32-catalyst-utils will be added to the package
==> catalyst-total-hd234k dependencies:
- linux>=3.0 (already installed)
- linux<3.19 (already installed)
- linux-headers (already installed)
- xorg-server>=1.7.0 (already installed)
- netkit-bsd-finger (already installed)
- libxrandr (already installed)
- libsm (already installed)
- fontconfig (already installed)
- libxcursor (already installed)
- libxi (already installed)
- gcc-libs (already installed)
- gcc>4.0.0 (already installed)
- make (already installed)
- patch (already installed)
- libxinerama (already installed)
- mesa>=10.1.0-4 (already installed)
- lib32-libxext (already installed)
- lib32-libdrm (already installed)
- lib32-libxinerama (already installed)
- lib32-mesa>=10.1.0-4 (already installed)
- xorg-server<1.13.0 (package found)
==> Edit catalyst-total-hd234k.install ? [Y/n] ("A" to abort)
==> ---------------------------------------------------------
==> n
==> Continue building catalyst-total-hd234k ? [Y/n]
==> -----------------------------------------------
==>
==> Building and installing package
==> Install or build missing dependencies for catalyst-total-hd234k:
warning: downgrading package xorg-server (1.16.3-2 => 1.12.4-3)
resolving dependencies...
looking for conflicting packages...
:: xorg-server and xf86-video-ark are in conflict. Remove xf86-video-ark? [y/N] Y
:: xorg-server and xf86-video-ast are in conflict. Remove xf86-video-ast? [y/N] y
:: xorg-server and xf86-video-ati are in conflict. Remove xf86-video-ati? [y/N] y
:: xorg-server and xf86-video-cirrus are in conflict. Remove xf86-video-cirrus? [y/N] y
:: xorg-server and xf86-video-dummy are in conflict. Remove xf86-video-dummy? [y/N] y
:: xorg-server and xf86-video-glint are in conflict. Remove xf86-video-glint? [y/N] y
:: xorg-server and xf86-video-i128 are in conflict. Remove xf86-video-i128? [y/N] y
:: xorg-server and xf86-video-mach64 are in conflict. Remove xf86-video-mach64? [y/N] y
:: xorg-server and xf86-video-mga are in conflict. Remove xf86-video-mga? [y/N] y
:: xorg-server and xf86-video-modesetting are in conflict. Remove xf86-video-modesetting? [y/N] y
:: xorg-server and xf86-video-neomagic are in conflict. Remove xf86-video-neomagic? [y/N] y
:: xorg-server and xf86-video-nouveau are in conflict. Remove xf86-video-nouveau? [y/N] y
:: xorg-server and xf86-video-nv are in conflict. Remove xf86-video-nv? [y/N] y
:: xorg-server and xf86-video-openchrome are in conflict. Remove xf86-video-openchrome? [y/N] y
:: xorg-server and xf86-video-r128 are in conflict. Remove xf86-video-r128? [y/N] y
:: xorg-server and xf86-video-savage are in conflict. Remove xf86-video-savage? [y/N] y
:: xorg-server and xf86-video-siliconmotion are in conflict. Remove xf86-video-siliconmotion? [y/N] y
:: xorg-server and xf86-video-sis are in conflict. Remove xf86-video-sis? [y/N] y
:: xorg-server and xf86-video-tdfx are in conflict. Remove xf86-video-tdfx? [y/N] y
:: xorg-server and xf86-video-trident are in conflict. Remove xf86-video-trident? [y/N] y
:: xorg-server and xf86-video-vmware are in conflict. Remove xf86-video-vmware? [y/N] y
:: xorg-server and xf86-video-voodoo are in conflict. Remove xf86-video-voodoo? [y/N] y
Packages (23) xf86-video-ark-0.7.5-5 [removal] xf86-video-ast-0.97.0-5 [removal] xf86-video-ati-1:7.5.0-1 [removal] xf86-video-cirrus-1.5.2-4 [removal]
xf86-video-dummy-0.3.7-3 [removal] xf86-video-glint-1.2.8-5 [removal] xf86-video-i128-1.3.6-5 [removal] xf86-video-mach64-6.9.4-4 [removal]
xf86-video-mga-1.6.3-3 [removal] xf86-video-modesetting-0.9.0-2 [removal] xf86-video-neomagic-1.2.8-3 [removal] xf86-video-nouveau-1.0.11-2 [removal]
xf86-video-nv-2.1.20-5 [removal] xf86-video-openchrome-0.3.3-4 [removal] xf86-video-r128-6.9.2-3 [removal] xf86-video-savage-2.3.7-3 [removal]
xf86-video-siliconmotion-1.7.7-5 [removal] xf86-video-sis-0.10.7-6 [removal] xf86-video-tdfx-1.4.5-5 [removal] xf86-video-trident-1.3.6-6 [removal]
xf86-video-vmware-13.0.2-2 [removal] xf86-video-voodoo-1.2.5-5 [removal] xorg-server-1.12.4-3
Total Installed Size: 3.73 MiB
Net Upgrade Size: -3.31 MiB
:: Proceed with installation? [Y/n] Y
(1/1) checking keys in keyring [############################################################] 100%
(1/1) checking package integrity [############################################################] 100%
(1/1) loading package files [############################################################] 100%
(1/1) checking for file conflicts [############################################################] 100%
(23/23) checking available disk space [############################################################] 100%
( 1/22) removing xf86-video-voodoo [############################################################] 100%
( 2/22) removing xf86-video-vmware [############################################################] 100%
( 3/22) removing xf86-video-trident [############################################################] 100%
( 4/22) removing xf86-video-tdfx [############################################################] 100%
( 5/22) removing xf86-video-sis [############################################################] 100%
( 6/22) removing xf86-video-siliconmotion [############################################################] 100%
( 7/22) removing xf86-video-savage [############################################################] 100%
( 8/22) removing xf86-video-r128 [############################################################] 100%
( 9/22) removing xf86-video-openchrome [############################################################] 100%
(10/22) removing xf86-video-nv [############################################################] 100%
(11/22) removing xf86-video-nouveau [############################################################] 100%
(12/22) removing xf86-video-neomagic [############################################################] 100%
(13/22) removing xf86-video-modesetting [############################################################] 100%
(14/22) removing xf86-video-mga [############################################################] 100%
(15/22) removing xf86-video-mach64 [############################################################] 100%
(16/22) removing xf86-video-i128 [############################################################] 100%
(17/22) removing xf86-video-glint [############################################################] 100%
(18/22) removing xf86-video-dummy [############################################################] 100%
(19/22) removing xf86-video-cirrus [############################################################] 100%
(20/22) removing xf86-video-ati [############################################################] 100%
(21/22) removing xf86-video-ast [############################################################] 100%
(22/22) removing xf86-video-ark [############################################################] 100%
(1/1) downgrading xorg-server [############################################################] 100%
==> WARNING: x86_64 system detected
==> WARNING: [multilib] repository must be uncommented in /etc/pacman.conf to add lib32-catalyst-utils into the package
==> WARNING: OK, lib32-catalyst-utils will be added to the package
==> Making package: catalyst-total-hd234k 13.1-29 (mié ene 7 22:22:26 CST 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Downloading amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 101M 100 101M 0 0 103k 0 0:16:44 0:16:44 --:--:-- 105k
-> Found catalyst_build_module
-> Found lib32-catalyst.sh
-> Found catalyst.sh
-> Found atieventsd.sh
-> Found atieventsd.service
-> Found catalyst.conf
-> Found arch-fglrx-authatieventsd_new.patch
-> Found hook-fglrx
-> Found ati_make.sh
-> Found makefile_compat.patch
-> Found catalyst-hook.service
-> Found 3.5-do_mmap.patch
-> Found arch-fglrx-3.7.patch
-> Found arch-fglrx-3.8.patch
-> Found gentoo_linux-3.10-proc.diff
-> Found foutrelis_3.10_fix_for_legacy.patch
-> Found lano1106_fglrx_intel_iommu.patch
-> Found lano1106_kcl_agp_13_4.patch
-> Found arch_3.13_kernel_acpi_node.patch
-> Found cold-fglrx-3.14-current_euid.patch
-> Found fglrx_gpl_symbol.patch
==> Validating source files with md5sums...
amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip ... Passed
catalyst_build_module ... Passed
lib32-catalyst.sh ... Passed
catalyst.sh ... Passed
atieventsd.sh ... Passed
atieventsd.service ... Passed
catalyst.conf ... Passed
arch-fglrx-authatieventsd_new.patch ... Passed
hook-fglrx ... Passed
ati_make.sh ... Passed
makefile_compat.patch ... Passed
catalyst-hook.service ... Passed
3.5-do_mmap.patch ... Passed
arch-fglrx-3.7.patch ... Passed
arch-fglrx-3.8.patch ... Passed
gentoo_linux-3.10-proc.diff ... Passed
foutrelis_3.10_fix_for_legacy.patch ... Passed
lano1106_fglrx_intel_iommu.patch ... Passed
lano1106_kcl_agp_13_4.patch ... Passed
arch_3.13_kernel_acpi_node.patch ... Passed
cold-fglrx-3.14-current_euid.patch ... Passed
fglrx_gpl_symbol.patch ... Passed
==> Extracting sources...
-> Extracting amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip with bsdtar
==> Starting build()...
Creating directory archive_files
Verifying archive integrity... All good.
Uncompressing AMD Catalyst(TM) Proprietary Driver-8.97.100.7....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
==> Entering fakeroot environment...
==> WARNING: x86_64 system detected
==> WARNING: [multilib] repository must be uncommented in /etc/pacman.conf to add lib32-catalyst-utils into the package
==> WARNING: OK, lib32-catalyst-utils will be added to the package
==> Starting package()...
patching file etc/ati/authatieventsd.sh
patching file common/lib/modules/fglrx/build_mod/2.6.x/Makefile
Hunk #1 succeeded at 68 (offset 2 lines).
patching file common/lib/modules/fglrx/build_mod/firegl_public.c
Hunk #1 succeeded at 2136 (offset 30 lines).
Hunk #2 succeeded at 2153 (offset 30 lines).
Hunk #3 succeeded at 2170 (offset 30 lines).
Hunk #4 succeeded at 2183 (offset 30 lines).
patching file common/lib/modules/fglrx/build_mod/firegl_public.c
Hunk #1 succeeded at 3710 (offset -182 lines).
Hunk #2 succeeded at 3744 (offset -182 lines).
Hunk #3 succeeded at 3767 (offset -182 lines).
Hunk #4 succeeded at 3780 (offset -182 lines).
Hunk #5 succeeded at 3826 (offset -182 lines).
Hunk #6 succeeded at 3865 (offset -182 lines).
Hunk #7 succeeded at 3883 (offset -182 lines).
Hunk #8 succeeded at 3908 (offset -182 lines).
patching file common/lib/modules/fglrx/build_mod/kcl_acpi.c
patching file common/lib/modules/fglrx/build_mod/drmP.h
patching file common/lib/modules/fglrx/build_mod/drm_proc.h
patching file common/lib/modules/fglrx/build_mod/firegl_public.c
Hunk #1 succeeded at 571 (offset -12 lines).
Hunk #2 succeeded at 861 (offset -12 lines).
patching file common/lib/modules/fglrx/build_mod/firegl_public.c
patch unexpectedly ends in middle of line
Hunk #1 succeeded at 34 with fuzz 1.
patching file common/lib/modules/fglrx/build_mod/firegl_public.c
Hunk #1 succeeded at 97 with fuzz 2 (offset 4 lines).
patching file common/lib/modules/fglrx/build_mod/kcl_agp.c
patching file common/lib/modules/fglrx/build_mod/kcl_acpi.c
Hunk #1 succeeded at 775 (offset -3 lines).
patching file common/lib/modules/fglrx/build_mod/firegl_public.c
Hunk #1 succeeded at 1756 with fuzz 2 (offset -5 lines).
==> Tidying install...
-> Purging unwanted files...
-> Compressing man and info pages...
==> Creating package "catalyst-total-hd234k"...
-> Generating .PKGINFO file...
-> Adding install file...
-> Generating .MTREE file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: catalyst-total-hd234k 13.1-29 (mié ene 7 22:44:01 CST 2015)
==> Continue installing catalyst-total-hd234k ? [Y/n]
==> [v]iew package contents [c]heck package with namcap
==> ---------------------------------------------------
==> Y
[sudo] password for mario:
[sudo] password for mario:
loading packages...
resolving dependencies...
looking for conflicting packages...
:: catalyst-total-hd234k and mesa-libgl are in conflict (libgl). Remove mesa-libgl? [y/N] Y
:: catalyst-total-hd234k and libcl are in conflict. Remove libcl? [y/N] Y
:: catalyst-total-hd234k and lib32-mesa-libgl are in conflict (lib32-libgl). Remove lib32-mesa-libgl? [y/N] Y
:: catalyst-total-hd234k and lib32-libcl are in conflict. Remove lib32-libcl? [y/N] Y
Packages (5) lib32-libcl-1.1-1 [removal] lib32-mesa-libgl-10.4.1-1 [removal] libcl-1.1-4 [removal] mesa-libgl-10.4.1-1 [removal] catalyst-total-hd234k-13.1-29
Total Installed Size: 222.80 MiB
Net Upgrade Size: 222.68 MiB
:: Proceed with installation? [Y/n] Y
(1/1) checking keys in keyring [############################################################] 100%
(1/1) checking package integrity [############################################################] 100%
(1/1) loading package files [############################################################] 100%
(1/1) checking for file conflicts [############################################################] 100%
(5/5) checking available disk space [############################################################] 100%
(1/4) removing lib32-libcl [############################################################] 100%
(2/4) removing lib32-mesa-libgl [############################################################] 100%
(3/4) removing libcl [############################################################] 100%
(4/4) removing mesa-libgl [############################################################] 100%
(1/1) installing catalyst-total-hd234k [############################################################] 100%
Building fglrx module for 3.17.6-1-ARCH kernel ...
Ok.
Add nomodeset to your kernel line in /boot/grub/menu.lst , ie.:
kernel /boot/vmlinuz-linux root=/dev/sda1 ro nomodeset
You can use the tool 'aticonfig' to generate an xorg.conf file.
--------------------- ^^^^^^^^^ --------------------------------
fglrx was added into /etc/modules-load.d/catalyst.conf
atieventsd (needs acpid pkg) on systemd:
systemctl enable atieventsd
systemctl start atieventsd
For more info and troubleshooting visit:
http://wiki.archlinux.org/index.php/ATI_Catalyst
ATTENTION!
To enable 'automatic re-compilation while system shutdown/reboot'
testing feature run these commands as root:
systemctl enable catalyst-hook
systemctl start catalyst-hook
More info here:
https://bbs.archlinux.org/viewtopic.php?pid=1255575#p1255575
Optional dependencies for catalyst-total-hd234k
qt4: to run ATi Catalyst Control Center (amdcccle) [installed]
libxxf86vm: to run ATi Catalyst Control Center (amdcccle) [installed]
opencl-headers: headers necessary for OpenCL development
acpid: acpi event support / atieventsd [installed]
linux-lts-headers: to build the fglrx module for the linux-lts kernel
==> Checking vote status for catalyst-total-hd234k
You have already voted for catalyst-total-hd234k
==> Packages no longer required by any installed package:
libepoxy
- Then, I re-enable catalyst-hook (and optionally atieventsd) to be able to build modules at end and start of pc
$ sudo systemctl disable catalyst-hook
Removed symlink /etc/systemd/system/multi-user.target.wants/catalyst-hook.service.
$ sudo systemctl disable atieventsd
Removed symlink /etc/systemd/system/multi-user.target.wants/atieventsd.service.
$ sudo systemctl enable catalyst-hook
Created symlink from /etc/systemd/system/multi-user.target.wants/catalyst-hook.service to /usr/lib/systemd/system/catalyst-hook.service.
$ sudo systemctl enable atieventsd
Created symlink from /etc/systemd/system/multi-user.target.wants/atieventsd.service to /usr/lib/systemd/system/atieventsd.service.
- Afterwards, I blacklist the radeon module for it not to interfere with fglrx:
Added "blacklist radeon" on the nano prompt below
$ sudo nano /etc/modprobe.d/modprobe.conf
- Then I generate the xorg.conf file, and get the output below with '# aticonfig --initial'
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "ColorTiling" # [<bool>]
#Option "ColorTiling2D" # [<bool>]
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "AccelMethod" # <str>
#Option "EXAVSync" # [<bool>]
#Option "EXAPixmaps" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "EnablePageFlip" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
Identifier "Card0"
Driver "radeon"
BusID "PCI:1:5:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
- Finally I rebuild grub boot to do nomodeset in the kernel
$ sudo nano /etc/default/grub && sudo grub-mkconfig -o /boot/grub/grub.cfg
Generating grub configuration file ...
Found background: /home/mario/Pictures/Wallpapers/974-arch-linux-1366x768-computer-wallpaper.png
Found linux image: /boot/vmlinuz-linux
Found initrd image: /boot/initramfs-linux.img
Found fallback initramfs image: /boot/initramfs-linux-fallback.img
done
Then I reboot, only to get to a black screen after the initial dmesg outputs around 10 seconds on boot.
$ journalctl -xe
-- Logs begin at lun 2014-12-15 04:28:08 CST, end at mié 2015-01-07 23:07:22 CST. --
ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0: [mem 0x100000000-0x13fffffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: On node 0 totalpages: 981392
ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA zone: 64 pages used for memmap
ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA zone: 21 pages reserved
ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA zone: 3998 pages, LIFO batch:0
ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA32 zone: 11176 pages used for memmap
ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA32 zone: 715250 pages, LIFO batch:31
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Normal zone: 4096 pages used for memmap
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Normal zone: 262144 pages, LIFO batch:31
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: PM-Timer IO Port: 0x408
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Local APIC address 0xfee00000
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
ene 07 23:05:30 HP425-Desktop-A-PC kernel: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: IRQ0 used by override.
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: IRQ9 used by override.
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Using ACPI (MADT) for SMP configuration information
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: HPET id: 0x43538301 base: 0xfed00000
ene 07 23:05:30 HP425-Desktop-A-PC kernel: smpboot: Allowing 4 CPUs, 3 hotplug CPUs
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xaf9f1000-0xafacefff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafacf000-0xafbcefff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafbcf000-0xafbfefff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafc00000-0xdfffffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: e820: [mem 0xafc00000-0xdfffffff] available for PCI devices
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Booting paravirtualized kernel on bare hardware
ene 07 23:05:30 HP425-Desktop-A-PC kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82752 r8192 d23744 u524288
ene 07 23:05:30 HP425-Desktop-A-PC kernel: pcpu-alloc: s82752 r8192 d23744 u524288 alloc=1*2097152
ene 07 23:05:30 HP425-Desktop-A-PC kernel: pcpu-alloc: [0] 0 1 2 3
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 966035
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Policy zone: Normal
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8290542b-0457-4fdd-b087-6096554bdcad rw quiet nomodeset
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Checking aperture...
ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: No AGP bridge found
ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Node 0: aperture [bus addr 0xa4000000-0xa5ffffff] (32MB)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Aperture pointing to e820 RAM. Ignoring.
ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Your BIOS doesn't leave a aperture memory hole
ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Please enable the IOMMU option in the BIOS setup
ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: This costs you 64MB of RAM
ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Mapping aperture over RAM [mem 0xa4000000-0xa7ffffff] (65536KB)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Memory: 3717040K/3925568K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 208528K reserved)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Preemptible hierarchical RCU implementation.
ene 07 23:05:30 HP425-Desktop-A-PC kernel: RCU dyntick-idle grace-period acceleration is enabled.
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Dump stacks of tasks blocking RCU-preempt GP.
ene 07 23:05:30 HP425-Desktop-A-PC kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
ene 07 23:05:30 HP425-Desktop-A-PC kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
ene 07 23:05:30 HP425-Desktop-A-PC kernel: NR_IRQS:8448 nr_irqs:456 0
ene 07 23:05:30 HP425-Desktop-A-PC kernel: spurious 8259A interrupt: IRQ7.
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Console: colour dummy device 80x25
ene 07 23:05:30 HP425-Desktop-A-PC kernel: console [tty0] enabled
ene 07 23:05:30 HP425-Desktop-A-PC kernel: allocated 15728640 bytes of page_cgroup
ene 07 23:05:30 HP425-Desktop-A-PC kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
ene 07 23:05:30 HP425-Desktop-A-PC kernel: hpet clockevent registered
ene 07 23:05:30 HP425-Desktop-A-PC kernel: tsc: Fast TSC calibration using PIT
ene 07 23:05:30 HP425-Desktop-A-PC kernel: tsc: Detected 2394.161 MHz processor
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.83 BogoMIPS (lpj=7980536)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: pid_max: default: 32768 minimum: 301
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Core revision 20140724
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: All ACPI Tables successfully acquired
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Security Framework initialized
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Yama: becoming mindful.
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys memory
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys devices
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys freezer
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys net_cls
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys blkio
ene 07 23:05:30 HP425-Desktop-A-PC kernel: mce: CPU supports 6 MCE banks
ene 07 23:05:30 HP425-Desktop-A-PC kernel: LVT offset 0 assigned for vector 0xf9
ene 07 23:05:30 HP425-Desktop-A-PC kernel: process: using AMD E400 aware idle routine
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ftrace: allocating 20687 entries in 81 pages
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
ene 07 23:05:30 HP425-Desktop-A-PC kernel: smpboot: CPU0: AMD V160 Processor (fam: 10, model: 06, stepping: 03)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Performance Events: AMD PMU driver.
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... version: 0
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... bit width: 48
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... generic registers: 4
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... value mask: 0000ffffffffffff
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... max period: 00007fffffffffff
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... fixed-purpose events: 0
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... event mask: 000000000000000f
ene 07 23:05:30 HP425-Desktop-A-PC kernel: process: System has AMD C1E enabled
ene 07 23:05:30 HP425-Desktop-A-PC kernel: process: Switch to broadcast mode on CPU0
ene 07 23:05:30 HP425-Desktop-A-PC kernel: x86: Booted up 1 node, 1 CPUs
ene 07 23:05:30 HP425-Desktop-A-PC kernel: smpboot: Total of 1 processors activated (4790.83 BogoMIPS)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
ene 07 23:05:30 HP425-Desktop-A-PC kernel: devtmpfs: initialized
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registering ACPI NVS region [mem 0xafacf000-0xafbcefff] (1048576 bytes)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: pinctrl core: initialized pinctrl subsystem
ene 07 23:05:30 HP425-Desktop-A-PC kernel: RTC time: 5:05:23, date: 01/08/15
ene 07 23:05:30 HP425-Desktop-A-PC kernel: NET: Registered protocol family 16
ene 07 23:05:30 HP425-Desktop-A-PC kernel: cpuidle: using governor ladder
ene 07 23:05:30 HP425-Desktop-A-PC kernel: cpuidle: using governor menu
ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: io port [0, ffffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: TOM: 00000000c0000000 aka 3072M
ene 07 23:05:30 HP425-Desktop-A-PC kernel: Fam 10h mmconf [mem 0xe0000000-0xefffffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [c0000000, cfffffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d0000000, d41fffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4200000, d43fffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4400000, dfffffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e0000000, e0ffffff] ==> none
ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e1000000, febfffff] ==> [f0000000, febfffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [fec00000, fffeffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [ffff0000, ffffffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: TOM2: 0000000140000000 aka 5120M
ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: [bus 00-1f] on node 0 link 0
ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [io 0x0000-0xffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xc0000000-0xdfffffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xf0000000-0xffffffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [mem 0x140000000-0xfcffffffff]
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: bus type PCI registered
ene 07 23:05:30 HP425-Desktop-A-PC kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
ene 07 23:05:30 HP425-Desktop-A-PC kernel: PCI: Using configuration type 1 for base access
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Module Device)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Device)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Aggregator Device)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: No handler for Region [ECRM] (ffff88013b42ca68) [EmbeddedControl] (20140724/evregion-163)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140724/exfldio-299)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/psparse-536)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/uteval-103)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Interpreter enabled
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: (supports S0 S3 S4 S5)
ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Using IOAPIC for interrupt ro

(EDIT: The outputs are incorrect. First post has them.)
The output of Xorg last time I booted up with fglrx:
$ cat /var/log/Xorg.0.log.old
[ 18.657]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 18.657] X Protocol Version 11, Revision 0
[ 18.657] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 18.657] Current Operating System: Linux HP425-Desktop-A-PC 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 18.657] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8290542b-0457-4fdd-b087-6096554bdcad rw quiet
[ 18.657] Build Date: 29 December 2014 01:09:58PM
[ 18.657]
[ 18.657] Current version of pixman: 0.32.6
[ 18.657] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 18.657] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.657] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 6 17:29:00 2015
[ 18.657] (==) Using config file: "/etc/X11/xorg.conf"
[ 18.657] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.657] (==) ServerLayout "X.org Configured"
[ 18.657] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 18.657] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 18.657] (**) | |-->Device "aticonfig-Device[0]-0"
[ 18.657] (**) |-->Input Device "Mouse0"
[ 18.657] (**) |-->Input Device "Keyboard0"
[ 18.657] (==) Automatically adding devices
[ 18.657] (==) Automatically enabling devices
[ 18.657] (==) Automatically adding GPU devices
[ 18.657] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 18.657] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 18.657] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 18.657] (WW) Disabling Mouse0
[ 18.657] (WW) Disabling Keyboard0
[ 18.657] (II) Loader magic: 0x818d80
[ 18.657] (II) Module ABI versions:
[ 18.657] X.Org ANSI C Emulation: 0.4
[ 18.657] X.Org Video Driver: 18.0
[ 18.657] X.Org XInput driver : 21.0
[ 18.657] X.Org Server Extension : 8.0
[ 18.659] (EE) systemd-logind: failed to get session: PID 407 does not belong to any known session
[ 18.659] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.660] (--) PCI:*(0:1:5:0) 1002:9712:103c:1475 rev 0, Mem @ 0xc0000000/268435456, 0xd4300000/65536, 0xd4200000/1048576, I/O @ 0x00005000/256
[ 18.660] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.661] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 18.661] (II) LoadModule: "glx"
[ 18.661] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.662] (II) Module glx: vendor="X.Org Foundation"
[ 18.662] compiled for 1.16.3, module version = 1.0.0
[ 18.662] ABI class: X.Org Server Extension, version 8.0
[ 18.662] (==) AIGLX enabled
[ 18.662] (II) LoadModule: "fglrx"
[ 18.662] (WW) Warning, couldn't open module fglrx
[ 18.662] (II) UnloadModule: "fglrx"
[ 18.662] (II) Unloading fglrx
[ 18.663] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 18.663] (EE) No drivers available.
[ 18.663] (EE)
Fatal server error:
[ 18.663] (EE) no screens found(EE)
[ 18.663] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 18.663] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 18.663] (EE)
The output itself of journalctl -xe
$ journalctl -xe
-- Logs begin at Mon 2014-12-15 04:28:08 CST, end at Tue 2015-01-06 17:16:16 CST. --
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 3 base 000100000000 mask FFFFC0000000 write-back
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 4 base 0000FFE00000 mask FFFFFFE00000 write-protect
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 5 base 0000FFF40000 mask FFFFFFFF0000 write-protect
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 6 disabled
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 7 disabled
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TOM2: 0000000140000000 aka 5120M
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: last_pfn = 0xafc00 max_arch_pfn = 0x400000000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Scanning 1 areas for low memory corruption
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Using GB pages for direct mapping
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x00000000-0x000fffff] page 4k
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2b000, 0x01b2bfff] PGTABLE
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2c000, 0x01b2cfff] PGTABLE
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2d000, 0x01b2dfff] PGTABLE
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x13fe00000-0x13fffffff] page 1G
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x13c000000-0x13fdfffff] page 1G
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x100000000-0x13bffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x100000000-0x13bffffff] page 1G
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x00100000-0xaf9f0fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x00100000-0x001fffff] page 4k
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x00200000-0x3fffffff] page 2M
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x40000000-0x7fffffff] page 1G
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x80000000-0xaf7fffff] page 2M
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0xaf800000-0xaf9f0fff] page 4k
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0xafbff000-0xafbfffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0xafbff000-0xafbfffff] page 4k
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2e000, 0x01b2efff] PGTABLE
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RAMDISK: [mem 0x379a0000-0x37cc7fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Early table checksum verification disabled
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: RSDP 0x00000000000F2A70 000014 (v00 HPQOEM)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: RSDT 0x00000000AFBFE038 00003C (v01 HPQOEM SLIC-MPC 00000003 01000013)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: FACP 0x00000000AFBFD000 000074 (v01 HPQOEM 307E 00000003 HP 00000001)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: DSDT 0x00000000AFBDE000 01B85D (v01 HPQOEM SB700 00000001 INTL 20060912)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: FACS 0x00000000AFB8F000 000040
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: APIC 0x00000000AFBFC000 000084 (v01 HPQOEM 307E 00000001 HP 00000001)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: MCFG 0x00000000AFBFB000 00003C (v01 HPQOEM 307E 00000001 HP 00000001)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: SLIC 0x00000000AFBFA000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: HPET 0x00000000AFBDB000 000038 (v01 HPQOEM 307E 00000001 HP 00000001)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: SSDT 0x00000000AFBDA000 0001B7 (v01 AMD POWERNOW 00000001 AMD 00000001)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Local APIC address 0xfee00000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Scanning NUMA topology in Northbridge 24
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: No NUMA configuration found
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initmem setup node 0 [mem 0x00000000-0x13fffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NODE_DATA [mem 0x13fffa000-0x13fffdfff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ba00000-ffff88013f5fffff] on node 0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Zone ranges:
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA [mem 0x00001000-0x00ffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA32 [mem 0x01000000-0xffffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Normal [mem 0x100000000-0x13fffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Movable zone start for each node
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Early memory node ranges
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0x00001000-0x0009efff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0x00100000-0xaf9f0fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0xafbff000-0xafbfffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0x100000000-0x13fffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: On node 0 totalpages: 981392
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA zone: 64 pages used for memmap
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA zone: 21 pages reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA zone: 3998 pages, LIFO batch:0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA32 zone: 11176 pages used for memmap
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA32 zone: 715250 pages, LIFO batch:31
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Normal zone: 4096 pages used for memmap
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Normal zone: 262144 pages, LIFO batch:31
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PM-Timer IO Port: 0x408
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Local APIC address 0xfee00000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: IRQ0 used by override.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: IRQ9 used by override.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Using ACPI (MADT) for SMP configuration information
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: HPET id: 0x43538301 base: 0xfed00000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: smpboot: Allowing 4 CPUs, 3 hotplug CPUs
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xaf9f1000-0xafacefff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafacf000-0xafbcefff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafbcf000-0xafbfefff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafc00000-0xdfffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: [mem 0xafc00000-0xdfffffff] available for PCI devices
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Booting paravirtualized kernel on bare hardware
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82752 r8192 d23744 u524288
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcpu-alloc: s82752 r8192 d23744 u524288 alloc=1*2097152
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcpu-alloc: [0] 0 1 2 3
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 966035
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Policy zone: Normal
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8290542b-0457-4fdd-b087-6096554bdcad rw quiet nomodeset
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Checking aperture...
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: No AGP bridge found
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Node 0: aperture [bus addr 0x5728000000-0x5729ffffff] (32MB)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Aperture beyond 4GB. Ignoring.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Your BIOS doesn't leave a aperture memory hole
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Please enable the IOMMU option in the BIOS setup
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: This costs you 64MB of RAM
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Mapping aperture over RAM [mem 0xa4000000-0xa7ffffff] (65536KB)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Memory: 3717040K/3925568K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 208528K reserved)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Preemptible hierarchical RCU implementation.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RCU dyntick-idle grace-period acceleration is enabled.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Dump stacks of tasks blocking RCU-preempt GP.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NR_IRQS:8448 nr_irqs:456 0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: spurious 8259A interrupt: IRQ7.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Console: colour dummy device 80x25
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: console [tty0] enabled
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: allocated 15728640 bytes of page_cgroup
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet clockevent registered
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tsc: Fast TSC calibration using PIT
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tsc: Detected 2393.931 MHz processor
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.35 BogoMIPS (lpj=7979770)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pid_max: default: 32768 minimum: 301
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Core revision 20140724
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: All ACPI Tables successfully acquired
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Security Framework initialized
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Yama: becoming mindful.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys memory
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys devices
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys freezer
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys net_cls
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys blkio
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: mce: CPU supports 6 MCE banks
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: LVT offset 0 assigned for vector 0xf9
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: process: using AMD E400 aware idle routine
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ftrace: allocating 20687 entries in 81 pages
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: smpboot: CPU0: AMD V160 Processor (fam: 10, model: 06, stepping: 03)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Performance Events: AMD PMU driver.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... version: 0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... bit width: 48
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... generic registers: 4
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... value mask: 0000ffffffffffff
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... max period: 00007fffffffffff
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... fixed-purpose events: 0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... event mask: 000000000000000f
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: process: System has AMD C1E enabled
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: process: Switch to broadcast mode on CPU0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: x86: Booted up 1 node, 1 CPUs
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: smpboot: Total of 1 processors activated (4789.35 BogoMIPS)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: devtmpfs: initialized
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registering ACPI NVS region [mem 0xafacf000-0xafbcefff] (1048576 bytes)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pinctrl core: initialized pinctrl subsystem
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RTC time: 23:15:36, date: 01/06/15
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 16
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: cpuidle: using governor ladder
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: cpuidle: using governor menu
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: io port [0, ffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TOM: 00000000c0000000 aka 3072M
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Fam 10h mmconf [mem 0xe0000000-0xefffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [c0000000, cfffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d0000000, d41fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4200000, d43fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4400000, dfffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e0000000, e0ffffff] ==> none
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e1000000, febfffff] ==> [f0000000, febfffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [fec00000, fffeffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [ffff0000, ffffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TOM2: 0000000140000000 aka 5120M
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: [bus 00-1f] on node 0 link 0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [io 0x0000-0xffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xc0000000-0xdfffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xf0000000-0xffffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [mem 0x140000000-0xfcffffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: bus type PCI registered
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: Using configuration type 1 for base access
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Module Device)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Device)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Aggregator Device)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: No handler for Region [ECRM] (ffff88013b42ca68) [EmbeddedControl] (20140724/evregion-163)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140724/exfldio-299)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/psparse-536)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/uteval-103)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Interpreter enabled
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: (supports S0 S3 S4 S5)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Using IOAPIC for interrupt routing
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [APPR] (off)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN0] (off)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN1] (off)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN2] (off)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN3] (off)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN4] (off)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xf0000000-0xfffdffff] ignored
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI host bridge to bus 0000:00
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: [103c:9602] type 01 class 0x060400
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: System wakeup disabled by ACPI
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: System wakeup disabled by ACPI
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: System wakeup disabled by ACPI
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x10: [io 0x6018-0x601f]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x14: [io 0x6024-0x6027]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x18: [io 0x6010-0x6017]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x1c: [io 0x6020-0x6023]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x20: [io 0x6000-0x600f]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x24: [mem 0xd440b000-0xd440b3ff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: set SATA to AHCI mode
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.0: reg 0x10: [mem 0xd440a000-0xd440afff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: reg 0x10: [mem 0xd4409000-0xd44090ff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: supports D1 D2
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.0: reg 0x10: [mem 0xd4408000-0xd4408fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: reg 0x10: [mem 0xd4407000-0xd44070ff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: supports D1 D2
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: System wakeup disabled by ACPI
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: System wakeup disabled by ACPI
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.5: reg 0x10: [mem 0xd4406000-0xd4406fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.0: reg 0x10: [mem 0xd4405000-0xd4405fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: reg 0x10: [mem 0xd4404000-0xd44040ff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: supports D1 D2
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x14: [io 0x5000-0x50ff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x18: [mem 0xd4300000-0xd430ffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x24: [mem 0xd4200000-0xd42fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: supports D1 D2
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.1: reg 0x10: [mem 0xd4310000-0xd4313fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.1: supports D1 D2
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x18: [mem 0xd0010000-0xd0010fff 64bit pref]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd000ffff 64bit pref]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: supports D1 D2
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: System wakeup disabled by ACPI
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: PCI bridge to [bus 02]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpiphp: Slot [1] registered
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: PCI bridge to [bus 03-05]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:06:00.0: [14e4:4727] type 00 class 0x028000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:06:00.0: reg 0x10: [mem 0xd2100000-0xd2103fff 64bit]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:06:00.0: supports D1 D2
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: PCI bridge to [bus 06]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: on NUMA node 0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Enabled 5 GPEs in block 00 to 1F
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: setting as boot device: PCI:0000:01:05.0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: loaded
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: bridge control possible 0000:01:05.0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: Using ACPI for IRQ routing
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: pci_cache_line_size set to 64 bytes
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: reserve RAM buffer [mem 0xaf9f1000-0xafffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: reserve RAM buffer [mem 0xafc00000-0xafffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: Initializing
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: domain hash size = 128
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: protocols = UNLABELED CIPSOv4
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: unlabeled traffic allowed by default
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Switched to clocksource hpet
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp: PnP ACPI init
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0400-0x04cf] could not be reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x04d0-0x04d1] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x04d6] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0680-0x06ff] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x077a] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c00-0x0c01] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c14] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c50-0x0c52] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c6c] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c6f] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0cd0-0x0cdb] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0220-0x0227] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0260-0x0273] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0800] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0804] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x087f] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0cdc-0x0cdf] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0b00-0x0b0f] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0b20-0x0b3f] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0200-0x027f] could not be reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0x000ec000-0x000fffff] could not be reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0x00100000-0xbfffffff] could not be reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xfeb00000-0xfeb00fff] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp 00:04: Plug and Play ACPI device, IDs SYN0177 SYN0100 SYN0002 PNP0f13 (active)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp: PnP ACPI: found 5 devices
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: BAR 6: assigned [mem 0xd3200000-0xd321ffff pref]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: PCI bridge to [bus 02]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: PCI bridge to [bus 03-05]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: PCI bridge to [bus 06]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: PCI bridge to [bus 07]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 18 [mem 0xc0000000-0xdfffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 19 [mem 0xf0000000-0xffffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:01: resource 1 [mem 0xd4200000-0xd43fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:02: resource 1 [mem 0xd3200000-0xd41fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd10fffff 64bit pref]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:03: resource 1 [mem 0xd2200000-0xd31fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:03: resource 2 [mem 0xd1100000-0xd20fffff 64bit pref]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:06: resource 1 [mem 0xd2100000-0xd21fffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 18 [mem 0xc0000000-0xdfffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 19 [mem 0xf0000000-0xffffffff]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 2
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP: Hash tables configured (established 32768 bind 32768)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP: reno registered
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 1
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: CLS mismatch (64 != 32), using 64 bytes
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: Video device with shadowed ROM
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Unpacking initramfs...
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing initrd memory: 3232K (ffff8800379a0000 - ffff880037cc8000)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: Disabling AGP.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: aperture base @ a4000000 size 65536 KB
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: using GART IOMMU.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: microcode: CPU0: patch_level=0x010000c8
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: LVT offset 1 assigned for vector 0x400
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: IBS: LVT offset 1 assigned
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: perf: AMD IBS detected (0x0000001f)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Scanning for low memory corruption every 60 seconds
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: futex hash table entries: 1024 (order: 4, 65536 bytes)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initialise system trusted keyring
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: zpool: loaded
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: zbud: loaded
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: VFS: Disk quotas dquot_6.5.2
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: msgmni has been set to 7394
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Key type big_key registered
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: io scheduler noop registered
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: io scheduler deadline registered
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: io scheduler cfq registered (default)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcieport 0000:00:07.0: irq 25 for MSI/MSI-X
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcieport 0000:00:09.0: irq 26 for MSI/MSI-X
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: mode is 1366x768x32, linelength=5504, pages=0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: scrolling: redraw
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 4160k, total 4160k
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Console: switching to colour frame buffer device 170x48
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: fb0: VESA VGA frame buffer device
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: GHES: HEST is not enabled!
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet_acpi_add: no address or irqs in _CRS
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Linux agpgart interface v0.103
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: RTC can wake from S4
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ledtrig-cpu: registered to indicate activity on CPUs
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP: cubic registered
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 10
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 17
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Loading compiled-in X.509 certificates
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: registered taskstats version 1
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Magic number: 15:578:301
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tty tty30: hash matches
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: setting system clock to 2015-01-06 23:15:37 UTC (1420586137)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Hibernation image not present or could not be loaded.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing unused kernel memory: 1136K (ffffffff818e2000 - ffffffff819fe000)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Write protecting the kernel read-only data: 8192k
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: random: systemd-tmpfile urandom read with 4 bits of entropy available
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: i8042: Detected active multiplexing controller, rev 1.1
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: bus type USB registered
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usbcore: registered new interface driver usbfs
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usbcore: registered new interface driver hub
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: SCSI subsystem initialized
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usbcore: registered new device driver usb
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci: OHCI PCI platform driver
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: QUIRK: Enable AMD PLL fix
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:12.0: OHCI PCI host controller
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:12.0: irq 18, io mem 0xd440a000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci: EHCI PCI platform driver
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: libata version 3.00 loaded.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: USB hub found
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: 5 ports detected
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: EHCI Host Controller
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: debug port 1
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: irq 17, io mem 0xd4409000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 2-0:1.0: USB hub found
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 2-0:1.0: 5 ports detected
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: USB hub found
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: 5 ports detected
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ahci 0000:00:11.0: version 3.0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi host0: ahci
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi host1: ahci
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b100 irq 19
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b180 irq 19
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:13.0: OHCI PCI host controller
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 3
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:13.0: irq 18, io mem 0xd4408000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: USB hub found
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: 5 ports detected
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: EHCI Host Controller
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: debug port 1
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: irq 17, io mem 0xd4407000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 4-0:1.0: USB hub found
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 4-0:1.0: 5 ports detected
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: USB hub found
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: 5 ports detected
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: EHCI Host Controller
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: debug port 1
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: irq 17, io mem 0xd4404000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 5-0:1.0: USB hub found
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 5-0:1.0: 4 ports detected
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:14.5: OHCI PCI host controller
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:14.5: irq 18, io mem 0xd4406000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 6-0:1.0: USB hub found
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 6-0:1.0: 2 ports detected
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:16.0: OHCI PCI host controller
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:16.0: irq 18, io mem 0xd4405000
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 7-0:1.0: USB hub found
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 7-0:1.0: 4 ports detected
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usb 2-5: new high-speed USB device number 2 using ehci-pci
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tsc: Refined TSC clocksource calibration: 2394.005 MHz
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OCA1G, max UDMA/100
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1.00: configured for UDMA/100
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54503 CA1G PQ: 0 ANSI: 5
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2.00: ATAPI: hp DVDRAM GT30L, mP06, max UDMA/100
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2.00: configured for UDMA/100
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi 1:0:0:0: CD-ROM hp DVDRAM GT30L mP06 PQ: 0 ANSI: 5
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sda: sda1 sda2
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usb 3-4: new full-speed USB device number 2 using ohci-pci
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Switched to clocksource tsc
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: random: nonblocking pool is initialized
Jan 06 17:15:42 HP425-Desktop-A-PC systemd[1]: Cannot add dependency job for unit atieventsd.service, ignoring: Unit acpid.socket failed to load: No such file or directory.
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Sleep Button [SLPB]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Lid Switch [LID]
Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input:

[Solved] XServer 1.13 and Catalyst...

Hi, after the last update i can't start my xserver.
Systemd says, that gdm starts fine but i can't see anything except my tty
Heres the Xorg.0.log:
[ 170.848]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 170.878] X Protocol Version 11, Revision 0
[ 170.888] Build Operating System: Linux 3.6.0-1-ARCH x86_64
[ 170.899] Current Operating System: Linux arch247 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012 x86_64
[ 170.899] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7f15c92f-c86f-49dd-ab06-f89a4a37d526 ro init=/usr/lib/systemd/systemd nomodeset
[ 170.924] Build Date: 05 October 2012 01:57:18PM
[ 170.937]
[ 170.949] Current version of pixman: 0.26.2
[ 170.976] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 170.976] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 171.033] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 18:30:14 2012
[ 171.049] (==) Using config file: "/etc/X11/xorg.conf"
[ 171.064] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 171.064] (==) ServerLayout "aticonfig Layout"
[ 171.064] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 171.064] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 171.064] (**) | |-->Device "aticonfig-Device[0]-0"
[ 171.064] (==) Automatically adding devices
[ 171.064] (==) Automatically enabling devices
[ 171.064] (==) Automatically adding GPU devices
[ 171.065] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 171.065] Entry deleted from font path.
[ 171.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 171.065] Entry deleted from font path.
[ 171.065] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 171.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 171.065] Entry deleted from font path.
[ 171.065] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 171.065] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 171.065] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 171.065] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 171.065] (II) Loader magic: 0x7fcc20
[ 171.065] (II) Module ABI versions:
[ 171.065] X.Org ANSI C Emulation: 0.4
[ 171.065] X.Org Video Driver: 13.0
[ 171.065] X.Org XInput driver : 18.0
[ 171.065] X.Org Server Extension : 7.0
[ 171.068] (--) PCI:*(0:0:1:0) 1002:9802:1043:84a5 rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[ 171.068] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 171.084] Initializing built-in extension Generic Event Extension
[ 171.099] Initializing built-in extension SHAPE
[ 171.114] Initializing built-in extension MIT-SHM
[ 171.130] Initializing built-in extension XInputExtension
[ 171.145] Initializing built-in extension XTEST
[ 171.160] Initializing built-in extension BIG-REQUESTS
[ 171.175] Initializing built-in extension SYNC
[ 171.190] Initializing built-in extension XKEYBOARD
[ 171.205] Initializing built-in extension XC-MISC
[ 171.220] Initializing built-in extension SECURITY
[ 171.235] Initializing built-in extension XINERAMA
[ 171.250] Initializing built-in extension XFIXES
[ 171.265] Initializing built-in extension RENDER
[ 171.280] Initializing built-in extension RANDR
[ 171.295] Initializing built-in extension COMPOSITE
[ 171.311] Initializing built-in extension DAMAGE
[ 171.326] Initializing built-in extension MIT-SCREEN-SAVER
[ 171.342] Initializing built-in extension DOUBLE-BUFFER
[ 171.358] Initializing built-in extension RECORD
[ 171.374] Initializing built-in extension DPMS
[ 171.390] Initializing built-in extension X-Resource
[ 171.406] Initializing built-in extension XVideo
[ 171.422] Initializing built-in extension XVideo-MotionCompensation
[ 171.439] Initializing built-in extension XFree86-VidModeExtension
[ 171.455] Initializing built-in extension XFree86-DGA
[ 171.472] Initializing built-in extension XFree86-DRI
[ 171.489] Initializing built-in extension DRI2
[ 171.489] (II) "glx" will be loaded by default.
[ 171.489] (II) LoadModule: "glx"
[ 171.489] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 171.490] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 171.490] compiled for 6.9.0, module version = 1.0.0
[ 171.507] Loading extension GLX
[ 171.507] (II) LoadModule: "fglrx"
[ 171.508] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 171.538] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 171.538] compiled for 1.4.99.906, module version = 9.0.2
[ 171.538] Module class: X.Org Video Driver
[ 171.538] (II) Loading sub module "fglrxdrm"
[ 171.538] (II) LoadModule: "fglrxdrm"
[ 171.539] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 171.539] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 171.539] compiled for 1.4.99.906, module version = 9.0.2
[ 171.539] (II) AMD Proprietary Linux Driver Version Identifier:9.00.2
[ 171.539] (II) AMD Proprietary Linux Driver Release Identifier: 9.00.11
[ 171.539] (II) AMD Proprietary Linux Driver Build Date: Sep 20 2012 11:56:16
[ 171.539] (--) using VT number 2
[ 171.649] (WW) Falling back to old probe method for fglrx
[ 171.660] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 171.663] ukiDynamicMajor: found major device number 251
[ 171.663] ukiDynamicMajor: found major device number 251
[ 171.663] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 171.663] ukiOpenDevice: node name is /dev/ati/card0
[ 171.663] ukiOpenDevice: open result is 9, (OK)
[ 171.663] ukiOpenDevice: Get driver state failed
[ 171.663] ukiOpenByBusid: ukiOpenMinor returns 9
[ 171.664] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 171.665] (--) Chipset Supported AMD Graphics Processor (0x9802) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:1) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:2) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:3) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 171.668] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 171.668] (II) AMD Video driver is signed
[ 171.669] (II) fglrx(0): pEnt->device->identifier=0x165d5a0
[ 171.669] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[ 171.670] (II) Loading sub module "vgahw"
[ 171.670] (II) LoadModule: "vgahw"
[ 171.670] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 171.670] (II) Module vgahw: vendor="X.Org Foundation"
[ 171.670] compiled for 1.13.0, module version = 0.1.0
[ 171.670] ABI class: X.Org Video Driver, version 13.0
[ 171.670] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 171.670] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 171.670] (==) fglrx(0): Default visual is TrueColor
[ 171.670] (**) fglrx(0): Option "DPMS" "true"
[ 171.671] (==) fglrx(0): RGB weight 888
[ 171.671] (II) fglrx(0): Using 8 bits per RGB
[ 171.671] (==) fglrx(0): Buffer Tiling is ON
[ 171.671] (II) Loading sub module "fglrxdrm"
[ 171.671] (II) LoadModule: "fglrxdrm"
[ 171.671] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 171.671] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 171.671] compiled for 1.4.99.906, module version = 9.0.2
[ 171.674] ukiDynamicMajor: found major device number 251
[ 171.675] ukiDynamicMajor: found major device number 251
[ 171.675] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 171.675] ukiOpenDevice: node name is /dev/ati/card0
[ 171.675] ukiOpenDevice: open result is 12, (OK)
[ 171.675] ukiOpenDevice: Get driver state failed
[ 171.675] ukiOpenByBusid: ukiOpenMinor returns 12
[ 171.675] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 171.675] (EE) fglrx(0): The graphics processor is already set to console mode, set X mode fail. Cannot start X.
[ 171.675] (EE) fglrx(0): PreInit failed
[ 171.675] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === end
[ 171.683] SetVBEMode failed
[ 171.683] (II) UnloadModule: "fglrx"
[ 171.683] (II) UnloadSubModule: "fglrxdrm"
[ 171.683] (II) Unloading fglrxdrm
[ 171.683] (II) UnloadSubModule: "vgahw"
[ 171.683] (II) Unloading vgahw
[ 171.683] (II) UnloadSubModule: "fglrxdrm"
[ 171.683] (EE) Screen(s) found, but none have a usable configuration.
[ 171.683]
Fatal server error:
[ 171.683] no screens found
[ 171.683] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 171.684] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 171.684] (EE)
[ 171.920] Server terminated with error (1). Closing log file.
Xserver is at version 1.13, catalyst should be at version 12.9
The xorg.conf-file was generated through aticonfig --inital and worked before the update. While searching the net i came across /etc/dbus-1/gdm.conf, maybe its a permission-problem?
Any help is appreciated
Last edited by D4ve (2012-10-13 21:31:54)

Had also a problem with xorg 1.13 and catalyst. (just not gdm but slim).
I found this:
The main graphics drivers have already been updated to support the new API. The proprietary NVIDIA graphics driver has also been updated for the X.Org Server 1.13 ABI. The only common driver not yet supporting this new xorg-server release is the AMD Catalyst binary driver, but the API/ABI support should be there within a few months.
Source: http://www.phoronix.com/scan.php?page=n … px=MTE3Njg
Seems that is the reason.
In this topic [1] Vi0L0 said that catalyst-test from AUR works with xorg 1.13 from [testing]. I didn't test that. I just downgraded xorg-server, xorg-server-common, catalyst-utils, lib32-catalyst-utils (and xf86-input-evdev because the newest package has always dep. to the newest xorg-server).
[1] https://bbs.archlinux.org/viewtopic.php … 0#p1172200
My package versions are (after downgrading):
xorg-server 1.12.4-1
xorg-server-common 1.12.4-1
catalyst 12.8-2
catalyst-utils 12.8-2
lib32-catalyst-utils 12.8-2
Edit: I just realised that there is a new catalyst package (catalyst-dkms) on the [community], i always used the package from the [catalyst] repo (Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch).
Last edited by sysrmr (2012-10-13 18:37:54)

(SOLVED)Xorg not functioning correctly.

So, I've set up Arch systems before, but I am at wit's end with this problem.
I've installed all the xorg packages as recommended by the installation guide, but unfortunately, every time I enter "startx" in the command line, I'm met with an black X environment, which makes my screen "blink" everytime I try to switch the tty. I'm able to see a mouse icon, but it changes from an "X" to an "arrow". When I AM able to get to another tty command line, I kill X, and look at the /var/log/Xorg.0.log, and this is what I find:
http://pastebin.ca/2169475
The "EQ Overflow" bit is a bit worrying.
Video Card Information:
Sapphire Radeon HD 6790 1GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support.
If one could help, it would be much appreciated.
EDIT: Forgot to mention that I am using the open source radeon driver, "xf86-video-ati". Thanks again!
UPDATE 07/11/12: OK, so after much deliberation and suffering, I switched over to the catalyst driver. It worked, initially. It defaulted to the twm clock and terminals, as expected. HOWEVER. When I try to open my openbox session with tint2 with startx, the screen goes dark, and comes up to a frozen picture of the Arch Linux boot screen. I am, as of yet, unable to comprehend as to why Xorg is doing this. I'm going to look into my Xorg log file to see what went wrong. If any of you know anything, please tell me! Thanks.
Last edited by CFlandre (2012-07-24 01:35:49)

Hi,
if you read and test this step by step it should be OK
https://wiki.archlinux.org/index.php/Be … _Interface

Catalyst: Mouse Pointer looks weird on one monitor

Hi, i just installed a fresh Arch system (2.6.35-ARCH) and I'm using Xorg (1.9.0) together with the AUR-package "catalyst-test". Now when i start up a desktop environment (i tryd twm and openbox), my mouse pointer looks weird on my right monitor but normal on my left, which is my primary.
Right Monitor (the square on the left is my mouse pointer)
When i tryd to make a screenshot of the problem the image just showed me the mouse pointer as its supposed to be, so i had to make this picture with a camera. The mouse pointer is fully functional just its look is broken. I never had this bug before when using the same hardware together with Arch. When I changed my xorg.conf so that my right monitor is the primary one, the mouse pointer looks weird on the left but is okay on the right.
xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "aticonfig-Screen[0]-1" RightOf "aticonfig-Screen[0]-0"
EndSection
Section "Module"
EndSection
Section "ServerFlags"
Option "Xinerama" "on"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "DesktopSetup" "horizontal"
Option "Capabilities" "0x00000800"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-1"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1600x1200"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-1"
Device "aticonfig-Device[0]-1"
Monitor "aticonfig-Monitor[0]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1600x1200"
EndSubSection
EndSection
Last edited by aXyde (2010-10-10 18:34:37)

Radioactiveman wrote:Please inform yourself before writing these comments.
Catalyst-test is compatible with xorg-server 1.9, otherwise there would be just a blank screen ...
I'll keep that in mind, thanx for your helpul comment.

Catalyst woes

Installed latest catalyst 8.6 today and I am having big problems. Running AMD 780G IGP. X starts only as root, immediately shutdowns for normal users. Even for root there seems to be a problem. glxgears and fgl_glxgears work fine but glxinfo and fglrxinfo segfault. Output of fglrxinfo:-
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 3200 Graphics
OpenGL version string: 2.1.7659 Release
Segmentation fault
And a similar error for glxinfo. Here is xorg.conf:-
Section "ServerLayout"
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc103"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "false"
EndSection

I doubt it is hardware related as my pc is just a month hold. Furthermore, doom 3 seems to work fine and I am getting 36 FPS at 800x600 High quality. Everything seems to work perfectly in windows xp and as I said before, doom 3 is slightly faster in Arch than in xp! I did a memtest and the memory is alright. I have no clue how to check whether the integrated HD 3200 is working properly. As I really have a lot of time to kill, I did some extensive distribution testing. Here are the results:-
OpenSuse 11 kde3 with catalyst 8.5- Everything works perfect but if you leave the computer idle for some time(say downloading) it may completely lock up. This does not happen if I am using the comp even for hours at a stretch. You will have to leave it idle and the locking up is completely random. i think it has something to do with acpi but no such problem with other distros so I am dumping suse. Btw, kde4 in suse is just awesome. Even if you install just kde3 a lot of packages will be from kde4(ktorrent, games)
Fedora 9:- They bundle the next version of xorg and catalyst cannot be installed you downgrade xserver. Not worth the effort, so I skipped it. radeonhd driver actually worked in this one but the screen had huge black borders all around.
mandriva 2008.1 kde- This one is strange, the driver version with mandriva is 8.471. doom 3 works but the sound is delayed. Some times the delay is as much as 5 secs. Exceptionally irritating.
Zenwalk 5.2- Really funny, I cannot install the drivers. There is no package available in the zenwalk repo and installing the driver manually or generating a slackware package both give me an error about GPL incompatibility or something.
Tommorow I will try ubuntu 8.04.
So it boils down the following:-
1. My HD 3200 is spooked.
2. catalyst 8.6/8.5 is spooked.
3. Someday up there does not like me.

Xorg packages 4 catalyst

Similar Messages

Maybe you are looking for