Xorg Problem - Failed to initialize the NVIDIA graphics device!
Hello.
I've encountered a problem while installing my Xorg server, which I'd like to use with KDE.
Here's the track of my xorg installation:
# sudo pacman -Syu
# sudo pacman -S xorg
(my graphic card is vVidia GeForce 8600 GT)
# sudo pacman -S nvidia-96xx nvidia-96xx-utils
# sudo nvidia-xconfig
(that's where I wanted to check if I did everything right)
#sudo startx
Xorg started loading and after a few secs it printed such output:
NVIDIA: could not open the devie file /dev/nvidia0 (Input/output error).
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:4:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usabe configuration.
Fatal server error:
no screens found
giving up.
xinit: Connection refused (errno 111): unable to connect to X server
xinit: No such process (errno3): Server error.
What should I do?
matnik wrote:(my graphic card is vVidia GeForce 8600 GT)
# sudo pacman -S nvidia-96xx nvidia-96xx-utils
# sudo nvidia-xconfig
1. wrong driver. the 96xx driver is for horrible old hardware, like the gf4. Install 'nvidia' and 'nvidia-utils' instead.
2. don't use nvidia-xconfig, it's not needed.
3. reboot after installing the driver if you havn't disabled kms already.
Similar Messages
-
[Closed]Bumblebee - Failed to initialize the NVIDIA GPU
Hi,
I'am having trouble with bumblebee. When i ran
optirun glxgears -info
I get the following error,
[ 66.574]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 66.574] X Protocol Version 11, Revision 0
[ 66.574] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 66.574] Current Operating System: Linux archlinux 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
[ 66.574] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=2136b55a-3c0b-4a13-a536-86d195e15fa8 ro
[ 66.574] Build Date: 01 July 2013 10:48:42AM
[ 66.574]
[ 66.574] Current version of pixman: 0.30.0
[ 66.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 66.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 66.574] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Jul 30 19:25:29 2013
[ 66.589] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 66.589] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 66.607] (==) ServerLayout "Layout0"
[ 66.607] (==) No screen section available. Using defaults.
[ 66.607] (**) |-->Screen "Default Screen Section" (0)
[ 66.607] (**) | |-->Monitor "<default monitor>"
[ 66.607] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 66.607] (**) | |-->Device "DiscreteNvidia"
[ 66.607] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 66.607] (**) Option "AutoAddDevices" "false"
[ 66.607] (**) Option "AutoAddGPU" "false"
[ 66.607] (**) Not automatically adding devices
[ 66.607] (==) Automatically enabling devices
[ 66.607] (**) Not automatically adding GPU devices
[ 66.607] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 66.607] Entry deleted from font path.
[ 66.607] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 66.607] Entry deleted from font path.
[ 66.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 66.607] Entry deleted from font path.
[ 66.607] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 66.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 66.607] Entry deleted from font path.
[ 66.607] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 66.607] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 66.607] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 66.607] (==) |-->Input Device "<default pointer>"
[ 66.607] (==) |-->Input Device "<default keyboard>"
[ 66.607] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 66.607] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 66.607] (II) Loader magic: 0x7fdc20
[ 66.607] (II) Module ABI versions:
[ 66.607] X.Org ANSI C Emulation: 0.4
[ 66.607] X.Org Video Driver: 14.1
[ 66.607] X.Org XInput driver : 19.1
[ 66.607] X.Org Server Extension : 7.0
[ 66.607] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 66.608] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 66.608] setversion 1.4 failed
[ 66.609] (--) PCI:*(0:1:0:0) 10de:0fd4:1462:10d7 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 66.609] Initializing built-in extension Generic Event Extension
[ 66.609] Initializing built-in extension SHAPE
[ 66.609] Initializing built-in extension MIT-SHM
[ 66.609] Initializing built-in extension XInputExtension
[ 66.609] Initializing built-in extension XTEST
[ 66.609] Initializing built-in extension BIG-REQUESTS
[ 66.609] Initializing built-in extension SYNC
[ 66.609] Initializing built-in extension XKEYBOARD
[ 66.609] Initializing built-in extension XC-MISC
[ 66.609] Initializing built-in extension SECURITY
[ 66.609] Initializing built-in extension XINERAMA
[ 66.609] Initializing built-in extension XFIXES
[ 66.609] Initializing built-in extension RENDER
[ 66.609] Initializing built-in extension RANDR
[ 66.609] Initializing built-in extension COMPOSITE
[ 66.609] Initializing built-in extension DAMAGE
[ 66.609] Initializing built-in extension MIT-SCREEN-SAVER
[ 66.609] Initializing built-in extension DOUBLE-BUFFER
[ 66.609] Initializing built-in extension RECORD
[ 66.609] Initializing built-in extension DPMS
[ 66.609] Initializing built-in extension X-Resource
[ 66.609] Initializing built-in extension XVideo
[ 66.609] Initializing built-in extension XVideo-MotionCompensation
[ 66.609] Initializing built-in extension XFree86-VidModeExtension
[ 66.609] Initializing built-in extension XFree86-DGA
[ 66.609] Initializing built-in extension XFree86-DRI
[ 66.609] Initializing built-in extension DRI2
[ 66.609] (II) LoadModule: "glx"
[ 66.622] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 67.248] (II) Module glx: vendor="NVIDIA Corporation"
[ 67.248] compiled for 4.0.2, module version = 1.0.0
[ 67.248] Module class: X.Org Server Extension
[ 67.248] (II) NVIDIA GLX Module 319.32 Wed Jun 19 14:55:38 PDT 2013
[ 67.257] Loading extension GLX
[ 67.257] (II) LoadModule: "nvidia"
[ 67.258] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 67.346] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 67.346] compiled for 4.0.2, module version = 1.0.0
[ 67.346] Module class: X.Org Video Driver
[ 67.354] (II) LoadModule: "mouse"
[ 67.354] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 67.357] (II) Module mouse: vendor="X.Org Foundation"
[ 67.357] compiled for 1.14.0, module version = 1.9.0
[ 67.357] Module class: X.Org XInput Driver
[ 67.357] ABI class: X.Org XInput driver, version 19.1
[ 67.357] (II) LoadModule: "kbd"
[ 67.358] (WW) Warning, couldn't open module kbd
[ 67.358] (II) UnloadModule: "kbd"
[ 67.358] (II) Unloading kbd
[ 67.358] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 67.358] (II) NVIDIA dlloader X Driver 319.32 Wed Jun 19 14:34:12 PDT 2013
[ 67.358] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 67.359] (--) using VT number 7
[ 67.367] (II) Loading sub module "fb"
[ 67.367] (II) LoadModule: "fb"
[ 67.367] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 67.367] (II) Module fb: vendor="X.Org Foundation"
[ 67.368] compiled for 1.14.2, module version = 1.0.0
[ 67.368] ABI class: X.Org ANSI C Emulation, version 0.4
[ 67.368] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 67.368] (II) Loading sub module "wfb"
[ 67.368] (II) LoadModule: "wfb"
[ 67.368] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 67.376] (II) Module wfb: vendor="X.Org Foundation"
[ 67.376] compiled for 1.14.2, module version = 1.0.0
[ 67.377] ABI class: X.Org ANSI C Emulation, version 0.4
[ 67.377] (II) Loading sub module "shadow"
[ 67.377] (II) LoadModule: "shadow"
[ 67.377] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 67.377] (II) Module shadow: vendor="X.Org Foundation"
[ 67.377] compiled for 1.14.2, module version = 1.1.0
[ 67.377] ABI class: X.Org ANSI C Emulation, version 0.4
[ 67.377] (II) Loading sub module "ramdac"
[ 67.377] (II) LoadModule: "ramdac"
[ 67.377] (II) Module "ramdac" already built-in
[ 67.378] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 67.378] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 67.378] (==) NVIDIA(0): RGB weight 888
[ 67.378] (==) NVIDIA(0): Default visual is TrueColor
[ 67.378] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 67.378] (**) NVIDIA(0): Option "NoLogo" "true"
[ 67.378] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 67.379] (**) NVIDIA(0): Option "UseEDID" "false"
[ 67.379] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 67.379] (**) NVIDIA(0): Enabling 2D acceleration
[ 67.379] (**) NVIDIA(0): Ignoring EDIDs
[ 67.379] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 67.379] (**) NVIDIA(0): mode
[ 72.511] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 72.511] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 72.511] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 72.511] (EE) NVIDIA(0): README for additional information.
[ 72.511] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 72.511] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 72.512] (II) UnloadModule: "nvidia"
[ 72.512] (II) UnloadSubModule: "shadow"
[ 72.512] (II) UnloadSubModule: "wfb"
[ 72.512] (II) UnloadSubModule: "fb"
[ 72.512] (EE) Screen(s) found, but none have a usable configuration.
[ 72.512] (EE)
Fatal server error:
[ 72.512] (EE) no screens found(EE)
[ 72.512] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 72.512] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 72.512] (EE)
[ 72.512] (EE) Server terminated with error (1). Closing log file.
This is /etc/bumblebee/bumblebee.conf file;
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
In addition
dmesg | grep nvidia
does not return anything and
modprobe nvidia
returns
modprobe: ERROR: could not insert 'nvidia': No such device
There is no /etc/X11/xorg.conf file.
Last edited by Selo (2013-07-30 19:41:25)Hello, I also I have that problem.
$primusrun glxgears
primus: fatal: Bumblebee daemon reported: error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
$grep -Fn '(EE' /var/log/Xorg.8.log
15: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
105:[ 875.659] (EE) Failed to load module "mouse" (module does not exist, 0)
110:[ 875.659] (EE) Failed to load module "kbd" (module does not exist, 0)
153:[ 880.312] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
154:[ 880.312] (EE) NVIDIA(0): check your system's kernel log for additional error
155:[ 880.312] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
156:[ 880.312] (EE) NVIDIA(0): README for additional information.
157:[ 880.312] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
158:[ 880.312] (EE) NVIDIA(0): Failing initialization of X screen 0
163:[ 880.312] (EE) Screen(s) found, but none have a usable configuration.
164:[ 880.312] (EE)
166:[ 880.312] (EE) no screens found(EE)
167:[ 880.312] (EE)
171:[ 880.312] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
172:[ 880.313] (EE)
173:[ 880.313] (EE) Server terminated with error (1). Closing log file. -
[Bumblebee]Failed to initialize the NVIDIA GPU at PCI:1:0:0.
Hi!
I've instaled Arch about a month ago and now wanted to check my nvidia card using Bumblebee, but have some errors…
[wicu@arch:~]$ optirun -vv minecraft
[ 4859.259278] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 4859.404191] [DEBUG]optirun version 3.0.1 starting...
[ 4859.404220] [DEBUG]Active configuration:
[ 4859.404226] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 4859.404242] [DEBUG] X display: :8
[ 4859.404254] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
[ 4859.404265] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 4859.404276] [DEBUG] VGL Compression: proxy
[ 4859.536971] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 4859.537027] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 4859.537053] [DEBUG]Socket closed.
[ 4859.537086] [ERROR]Aborting because fallback start is disabled.
[ 4859.537094] [DEBUG]Killing all remaining processes.
[wicu@arch:~]$ sudo journalctl // here is only part when I tried use bumblebee
Nov 26 17:48:43 arch kernel: NVRM: failed to copy vbios to system memory.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238670] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238729] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238765] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238819] [ERROR][XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238826] [ERROR][XORG] (EE) NVIDIA(0): check your system's kernel log for additional error
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238830] [ERROR][XORG] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238835] [ERROR][XORG] (EE) NVIDIA(0): README for additional information.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238841] [ERROR][XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238847] [ERROR][XORG] (EE) NVIDIA(0): Failing initialization of X screen 0
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238853] [ERROR][XORG] (EE) Screen(s) found, but none have a usable configuration.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238858] [ERROR][XORG] (EE)
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238863] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238868] [ERROR][XORG] (EE)
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238873] [ERROR]X did not start properly
Nov 26 17:48:43 arch kernel: NVRM: RmInitAdapter failed! (0x30:0xffffffff:739)
Nov 26 17:48:43 arch kernel: NVRM: rm_init_adapter(0) failed
// xorg log
[ 4859.510]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 4859.511] X Protocol Version 11, Revision 0
[ 4859.511] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 4859.511] Current Operating System: Linux arch 3.6.7-1-ARCH #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012 x86_64
[ 4859.511] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70a6cff9-bcf7-42eb-9ba1-73953e023617 ro quiet
[ 4859.511] Build Date: 08 November 2012 07:09:29PM
[ 4859.511]
[ 4859.511] Current version of pixman: 0.28.0
[ 4859.511] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4859.511] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4859.511] (==) Log file: "/var/log/Xorg.8.log", Time: Mon Nov 26 18:00:43 2012
[ 4859.511] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 4859.511] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4859.511] (==) ServerLayout "Layout0"
[ 4859.512] (==) No screen section available. Using defaults.
[ 4859.512] (**) |-->Screen "Default Screen Section" (0)
[ 4859.512] (**) | |-->Monitor "<default monitor>"
[ 4859.512] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 4859.512] (**) | |-->Device "Device1"
[ 4859.512] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4859.512] (**) Option "AutoAddDevices" "false"
[ 4859.512] (**) Not automatically adding devices
[ 4859.512] (==) Automatically enabling devices
[ 4859.512] (==) Automatically adding GPU devices
[ 4859.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4859.512] Entry deleted from font path.
[ 4859.512] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4859.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4859.512] Entry deleted from font path.
[ 4859.512] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4859.512] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 4859.512] (++) ModulePath set to "/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules"
[ 4859.512] (==) |-->Input Device "<default pointer>"
[ 4859.512] (==) |-->Input Device "<default keyboard>"
[ 4859.512] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 4859.512] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 4859.512] (II) Loader magic: 0x7fcc40
[ 4859.512] (II) Module ABI versions:
[ 4859.512] X.Org ANSI C Emulation: 0.4
[ 4859.513] X.Org Video Driver: 13.1
[ 4859.513] X.Org XInput driver : 18.0
[ 4859.513] X.Org Server Extension : 7.0
[ 4859.513] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4859.513] setversion 1.4 failed
[ 4859.516] (--) PCI:*(0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 4859.516] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4859.516] Initializing built-in extension Generic Event Extension
[ 4859.516] Initializing built-in extension SHAPE
[ 4859.516] Initializing built-in extension MIT-SHM
[ 4859.516] Initializing built-in extension XInputExtension
[ 4859.516] Initializing built-in extension XTEST
[ 4859.516] Initializing built-in extension BIG-REQUESTS
[ 4859.516] Initializing built-in extension SYNC
[ 4859.516] Initializing built-in extension XKEYBOARD
[ 4859.516] Initializing built-in extension XC-MISC
[ 4859.516] Initializing built-in extension SECURITY
[ 4859.516] Initializing built-in extension XINERAMA
[ 4859.516] Initializing built-in extension XFIXES
[ 4859.516] Initializing built-in extension RENDER
[ 4859.516] Initializing built-in extension RANDR
[ 4859.516] Initializing built-in extension COMPOSITE
[ 4859.516] Initializing built-in extension DAMAGE
[ 4859.516] Initializing built-in extension MIT-SCREEN-SAVER
[ 4859.516] Initializing built-in extension DOUBLE-BUFFER
[ 4859.516] Initializing built-in extension RECORD
[ 4859.516] Initializing built-in extension DPMS
[ 4859.516] Initializing built-in extension X-Resource
[ 4859.516] Initializing built-in extension XVideo
[ 4859.516] Initializing built-in extension XVideo-MotionCompensation
[ 4859.516] Initializing built-in extension XFree86-VidModeExtension
[ 4859.516] Initializing built-in extension XFree86-DGA
[ 4859.516] Initializing built-in extension XFree86-DRI
[ 4859.516] Initializing built-in extension DRI2
[ 4859.516] (II) LoadModule: "glx"
[ 4859.516] (II) Loading /usr/lib/nvidia-bumblebee/xorg/modules/extensions/libglx.so
[ 4859.526] (II) Module glx: vendor="NVIDIA Corporation"
[ 4859.526] compiled for 4.0.2, module version = 1.0.0
[ 4859.526] Module class: X.Org Server Extension
[ 4859.526] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012
[ 4859.526] Loading extension GLX
[ 4859.526] (II) LoadModule: "nvidia"
[ 4859.526] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4859.526] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4859.526] compiled for 4.0.2, module version = 1.0.0
[ 4859.526] Module class: X.Org Video Driver
[ 4859.526] (II) LoadModule: "mouse"
[ 4859.527] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 4859.527] (II) Module mouse: vendor="X.Org Foundation"
[ 4859.527] compiled for 1.13.0, module version = 1.8.1
[ 4859.527] Module class: X.Org XInput Driver
[ 4859.527] ABI class: X.Org XInput driver, version 18.0
[ 4859.527] (II) LoadModule: "kbd"
[ 4859.527] (WW) Warning, couldn't open module kbd
[ 4859.527] (II) UnloadModule: "kbd"
[ 4859.527] (II) Unloading kbd
[ 4859.527] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 4859.527] (II) NVIDIA dlloader X Driver 310.19 Thu Nov 8 00:53:33 PST 2012
[ 4859.527] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4859.527] (--) using VT number 7
[ 4859.527] (II) Loading sub module "wfb"
[ 4859.527] (II) LoadModule: "wfb"
[ 4859.527] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4859.527] (II) Module wfb: vendor="X.Org Foundation"
[ 4859.527] compiled for 1.13.0, module version = 1.0.0
[ 4859.527] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4859.527] (II) Loading sub module "ramdac"
[ 4859.527] (II) LoadModule: "ramdac"
[ 4859.527] (II) Module "ramdac" already built-in
[ 4859.527] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4859.527] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4859.527] (==) NVIDIA(0): RGB weight 888
[ 4859.527] (==) NVIDIA(0): Default visual is TrueColor
[ 4859.527] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4859.527] (**) NVIDIA(0): Option "NoLogo" "true"
[ 4859.528] (**) NVIDIA(0): Option "UseEDID" "false"
[ 4859.528] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
[ 4859.528] (**) NVIDIA(0): Enabling 2D acceleration
[ 4859.528] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
[ 4859.528] (**) NVIDIA(0): Ignoring EDIDs
[ 4859.534] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 4859.534] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 4859.534] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 4859.534] (EE) NVIDIA(0): README for additional information.
[ 4859.534] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 4859.534] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 4859.534] (II) UnloadModule: "nvidia"
[ 4859.534] (II) UnloadSubModule: "wfb"
[ 4859.534] (EE) Screen(s) found, but none have a usable configuration.
[ 4859.534]
Fatal server error:
[ 4859.534] no screens found
[ 4859.534] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4859.534] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 4859.534] (EE)
[ 4859.534] Server terminated with error (1). Closing log file.
[wicu@arch:~]$ lspci | grep VGA
3:00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
14:01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
[wicu@arch:~]$ primusrun minecraft
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
asdf
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
27 achievements
208 recipes
Setting user: Druedain, -4246576297828159265
primus: fatal: failure contacting bumblebee daemon
[18:05:39 - wicu@arch:~]$ primusrun minecraft
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
asdf
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
27 achievements
208 recipes
Setting user: Druedain, -7896572405277476304
primus: fatal: failure contacting bumblebee daemon
[wicu@arch:~]$ systemctl | grep bumblebee
35:bumblebeed.service[wicu@arch:~]$ dmesg | grep nvidia
782:[ 6.776816] nvidia: module license 'NVIDIA' taints kernel.
784:[ 6.784411] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[wicu@arch:~]$ cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
## Client options. Will take effect on the next optirun executed.
[optirun]
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
Module=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
[wicu@arch:~]$ cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "ConnectedMonitor" "DFP"
EndSection -
[Solved] Failed to initialize the NVIDIA kernel module
Hi all,
I've just made the jump to arch and have a fresh install. I'm having trouble getting the nvidia drivers to work. I am currently using the nouveau drivers without issue.
The method I am using - after much trial - is:
- uninstall nouveau and mesa lib
- install nvidia package
- remove nouveau module entry in mkinitcpio.conf
- run `mkinitcpio -p linux`
- edit .conf in xorg.conf.d with minimal required settings. Currently:
Section "Device"
Identifier "device0"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
I have installed the linux-headers package and tried reinstalling nvidia again
Card:
01:00.0 VGA compatible controller: NVIDIA Corporation GF106 [GeForce GTS 450] (rev a1)
Kernel:
3.12.6-1-ARCH
My Xorg.0.log looks like:
[ 3.979]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 3.979] X Protocol Version 11, Revision 0
[ 3.979] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 3.979] Current Operating System: Linux arch.tempera 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
[ 3.979] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
[ 3.979] Build Date: 13 December 2013 03:11:42PM
[ 3.979]
[ 3.979] Current version of pixman: 0.32.4
[ 3.979] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 3.979] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.979] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 4 21:29:46 2014
[ 3.980] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3.980] (==) No Layout section. Using the first Screen section.
[ 3.980] (==) No screen section available. Using defaults.
[ 3.980] (**) |-->Screen "Default Screen Section" (0)
[ 3.980] (**) | |-->Monitor "<default monitor>"
[ 3.981] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 3.981] (**) | |-->Device "device0"
[ 3.981] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.981] (==) Automatically adding devices
[ 3.981] (==) Automatically enabling devices
[ 3.981] (==) Automatically adding GPU devices
[ 3.984] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3.984] Entry deleted from font path.
[ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.984] Entry deleted from font path.
[ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.984] Entry deleted from font path.
[ 3.984] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.984] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 3.984] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.984] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.984] (II) Loader magic: 0x7fec20
[ 3.984] (II) Module ABI versions:
[ 3.984] X.Org ANSI C Emulation: 0.4
[ 3.984] X.Org Video Driver: 14.1
[ 3.984] X.Org XInput driver : 19.1
[ 3.984] X.Org Server Extension : 7.0
[ 3.985] (--) PCI:*(0:1:0:0) 10de:0dc4:19da:1184 rev 161, Mem @ 0xf4000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.986] Initializing built-in extension Generic Event Extension
[ 3.986] Initializing built-in extension SHAPE
[ 3.986] Initializing built-in extension MIT-SHM
[ 3.986] Initializing built-in extension XInputExtension
[ 3.986] Initializing built-in extension XTEST
[ 3.986] Initializing built-in extension BIG-REQUESTS
[ 3.986] Initializing built-in extension SYNC
[ 3.986] Initializing built-in extension XKEYBOARD
[ 3.986] Initializing built-in extension XC-MISC
[ 3.986] Initializing built-in extension SECURITY
[ 3.986] Initializing built-in extension XINERAMA
[ 3.986] Initializing built-in extension XFIXES
[ 3.986] Initializing built-in extension RENDER
[ 3.986] Initializing built-in extension RANDR
[ 3.986] Initializing built-in extension COMPOSITE
[ 3.986] Initializing built-in extension DAMAGE
[ 3.986] Initializing built-in extension MIT-SCREEN-SAVER
[ 3.986] Initializing built-in extension DOUBLE-BUFFER
[ 3.986] Initializing built-in extension RECORD
[ 3.986] Initializing built-in extension DPMS
[ 3.986] Initializing built-in extension X-Resource
[ 3.986] Initializing built-in extension XVideo
[ 3.986] Initializing built-in extension XVideo-MotionCompensation
[ 3.986] Initializing built-in extension XFree86-VidModeExtension
[ 3.986] Initializing built-in extension XFree86-DGA
[ 3.986] Initializing built-in extension XFree86-DRI
[ 3.986] Initializing built-in extension DRI2
[ 3.986] (II) LoadModule: "glx"
[ 3.989] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.075] (II) Module glx: vendor="NVIDIA Corporation"
[ 4.075] compiled for 4.0.2, module version = 1.0.0
[ 4.075] Module class: X.Org Server Extension
[ 4.075] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 4.076] Loading extension GLX
[ 4.076] (II) LoadModule: "nvidia"
[ 4.076] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4.082] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4.082] compiled for 4.0.2, module version = 1.0.0
[ 4.082] Module class: X.Org Video Driver
[ 4.083] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 4.083] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4.083] (++) using VT number 7
[ 4.090] (II) Loading sub module "fb"
[ 4.090] (II) LoadModule: "fb"
[ 4.090] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.091] (II) Module fb: vendor="X.Org Foundation"
[ 4.091] compiled for 1.14.5, module version = 1.0.0
[ 4.091] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.091] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 4.091] (II) Loading sub module "wfb"
[ 4.091] (II) LoadModule: "wfb"
[ 4.091] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4.092] (II) Module wfb: vendor="X.Org Foundation"
[ 4.092] compiled for 1.14.5, module version = 1.0.0
[ 4.092] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.092] (II) Loading sub module "ramdac"
[ 4.092] (II) LoadModule: "ramdac"
[ 4.092] (II) Module "ramdac" already built-in
[ 4.093] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.093] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4.093] (==) NVIDIA(0): RGB weight 888
[ 4.093] (==) NVIDIA(0): Default visual is TrueColor
[ 4.093] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.094] (**) NVIDIA(0): Enabling 2D acceleration
[ 4.095] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
[ 4.095] (EE) NVIDIA(0): system's kernel log for additional error messages and
[ 4.095] (EE) NVIDIA(0): consult the NVIDIA README for details.
[ 4.095] (EE) NVIDIA(0): *** Aborting ***
[ 4.095] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 4.095] (II) UnloadModule: "nvidia"
[ 4.095] (II) UnloadSubModule: "wfb"
[ 4.095] (II) UnloadSubModule: "fb"
[ 4.095] (EE) Screen(s) found, but none have a usable configuration.
[ 4.095] (EE)
Fatal server error:
[ 4.095] (EE) no screens found(EE)
[ 4.095] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 4.095] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4.095] (EE)
[ 4.107] (EE) Server terminated with error (1). Closing log file.
The only entry I found in `dmesg | grep nvidia` related to nvidia-drm, and seemed to say it was loaded successfully. I didn't save the exact entry and i've reinstalled nouveau now so that I could post this.
Any help much appriciated. I've been at this for a while. Learning a lot in the process!
Last edited by gnibbler (2014-01-04 22:31:49)Success! Several days of trying various things and I finally give in and make a post to this forum. One more attempt - which was only really so that I could add modprobe info to this post - and it works.
I had at some stage installed the driver xf86-video-nv, and this may have been causing the clash. I un-installed it, and followed the procedure above to reinstall nvidia.
I think the main hang up I'd had is that I had not been rebuilding my kernel image with mkinitcpio after installing nvidia during my previous attempts.
I hope some info in here helps some other stuck archer.
Edit: Thanks graysky. I had found the right nvidia driver using the arch wiki and followed this advice to remove the nouveau hook. Much appriciated.
Last edited by gnibbler (2014-01-04 22:35:00) -
"Failed to load the NVIDIA kernel module" [SOLVED]
Hi, I've just done a fresh install of Arch64 and I'm having problems with NVIDIA driver from the repo.
xorg, xf86-input-evdev -- INSTALLED
nvidia, nvidia-utils, lib32-nvidia-utils -- INSTALLED (version 256.44-1)
nouveau -- NOT INSTALLED
here goes the log files:
uname -a
Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ AuthenticAMD GNU/Linux
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
/etc/X11/xorg.conf (generated when I ran "nvidia-xconfig"):
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.44 ([email protected]) Thu Jul 29 01:52:55 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/var/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 142.066]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 142.084] X Protocol Version 11, Revision 0
[ 142.091] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 142.098] Current Operating System: Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64
[ 142.106] Kernel command line: BOOT_IMAGE=/vmlinuz26-lts root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 142.116] Build Date: 21 June 2010 12:01:49PM
[ 142.125]
[ 142.135] Current version of pixman: 0.18.2
[ 142.145] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 142.167] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 142.204] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 21:15:02 2010
[ 142.218] (==) Using config file: "/etc/X11/xorg.conf"
[ 142.232] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 142.246] (==) ServerLayout "Layout0"
[ 142.246] (**) |-->Screen "Screen0" (0)
[ 142.246] (**) | |-->Monitor "Monitor0"
[ 142.246] (**) | |-->Device "Device0"
[ 142.246] (**) |-->Input Device "Keyboard0"
[ 142.246] (**) |-->Input Device "Mouse0"
[ 142.246] (==) Automatically adding devices
[ 142.246] (==) Automatically enabling devices
[ 142.246] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 142.246] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 142.246] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 142.246] (WW) Disabling Keyboard0
[ 142.246] (WW) Disabling Mouse0
[ 142.246] (II) Loader magic: 0x7ce880
[ 142.246] (II) Module ABI versions:
[ 142.246] X.Org ANSI C Emulation: 0.4
[ 142.246] X.Org Video Driver: 7.0
[ 142.246] X.Org XInput driver : 9.0
[ 142.246] X.Org Server Extension : 3.0
[ 142.252] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 142.252] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 142.252] (II) LoadModule: "extmod"
[ 142.252] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 142.253] (II) Module extmod: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension MIT-SCREEN-SAVER
[ 142.253] (II) Loading extension XFree86-VidModeExtension
[ 142.253] (II) Loading extension XFree86-DGA
[ 142.253] (II) Loading extension DPMS
[ 142.253] (II) Loading extension XVideo
[ 142.253] (II) Loading extension XVideo-MotionCompensation
[ 142.253] (II) Loading extension X-Resource
[ 142.253] (II) LoadModule: "dbe"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 142.253] (II) Module dbe: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension DOUBLE-BUFFER
[ 142.253] (II) LoadModule: "glx"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 142.269] (II) Module glx: vendor="NVIDIA Corporation"
[ 142.269] compiled for 4.0.2, module version = 1.0.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 142.269] (II) Loading extension GLX
[ 142.269] (II) LoadModule: "record"
[ 142.269] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 142.269] (II) Module record: vendor="X.Org Foundation"
[ 142.269] compiled for 1.8.1.902, module version = 1.13.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] ABI class: X.Org Server Extension, version 3.0
[ 142.269] (II) Loading extension RECORD
[ 142.269] (II) LoadModule: "dri"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 142.270] (II) Module dri: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.0.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension XFree86-DRI
[ 142.270] (II) LoadModule: "dri2"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 142.270] (II) Module dri2: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.2.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension DRI2
[ 142.270] (II) LoadModule: "nvidia"
[ 142.270] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.271] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 142.271] compiled for 4.0.2, module version = 1.0.0
[ 142.271] Module class: X.Org Video Driver
[ 142.288] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 142.303] (EE) NVIDIA: system's kernel log for additional error messages.
[ 142.319] (II) UnloadModule: "nvidia"
[ 142.319] (II) Unloading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.319] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 142.335] (EE) No drivers available.
[ 142.351]
Fatal server error:
[ 142.384] no screens found
[ 142.400]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 142.469] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 142.488]
find / -name "*nvidia*"
/lib/modules/2.6.34-ARCH/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia/nvidiafb.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia/nvidiafb.ko
/etc/OpenCL/vendors/nvidia.icd
/etc/X11/xorg.conf.d/20-nvidia.conf
/usr/lib/libnvidia-cfg.so.1
/usr/lib/libnvidia-glcore.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so
/usr/lib/vdpau/libvdpau_nvidia.so.1
/usr/lib/tls/libnvidia-tls.so.256.44
/usr/lib/libnvidia-cfg.so.256.44
/usr/lib/libnvidia-cfg.so
/usr/lib/libnvidia-tls.so.256.44
/usr/lib/xorg/modules/drivers/nvidia_drv.so
/usr/lib/libnvidia-compiler.so.256.44
/usr/share/licenses/nvidia
/usr/share/licenses/lib32-nvidia-utils
/usr/share/licenses/nvidia-utils
/usr/share/applications/nvidia-settings.desktop
/usr/share/man/man1/nvidia-smi.1.gz
/usr/share/man/man1/nvidia-settings.1.gz
/usr/share/man/man1/nvidia-xconfig.1.gz
/usr/share/doc/nvidia
/usr/share/doc/nvidia-utils
/usr/share/pixmaps/nvidia-settings.png
/usr/bin/nvidia-bug-report.sh
/usr/bin/nvidia-settings
/usr/bin/nvidia-smi
/usr/bin/nvidia-xconfig
/usr/src/linux-2.6.34-ARCH/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia.h
/opt/lib32/usr/lib/libvdpau_nvidia.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so
/opt/lib32/usr/lib/libnvidia-glcore.so.256.44
/opt/lib32/usr/lib/tls/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so.1
/opt/lib32/usr/lib/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libnvidia-compiler.so.256.44
/var/lib/pacman/local/nvidia-256.44-1
/var/lib/pacman/local/nvidia-utils-256.44-1
/var/lib/pacman/local/lib32-nvidia-utils-256.44-1
/var/lib/pacman/sync/extra/nvidia-173xx-utils-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-173xx-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-256.44-1
/var/lib/pacman/sync/extra/nvidia-utils-256.44-1
/var/lib/pacman/sync/community/nvidia-cg-toolkit-2.2-4
/var/lib/pacman/sync/community/lib32-nvidia-utils-256.44-1
/var/cache/pacman/pkg/nvidia-utils-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/nvidia-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/lib32-nvidia-utils-256.44-1-x86_64.pkg.tar.xz
Do you have any idea of what should be done to fix it? I don't want to use NVIDIA driver from their site neither nouveau, I want to use the one from the repo. If you know how to solve it, instead of only pointing the solution, also tell why this is happening, it will help me and other people with the same problem too!
If you need additional information please ask me.
Thanks!!
Last edited by ILoveJapaneseGirls (2010-08-07 03:09:55)karol, I'll try to add the section you wrote to the xorg.conf, but first I want to show the log of the crash:
/var/log/Xorg.0.log
[ 69.813]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 69.858]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 69.882] X Protocol Version 11, Revision 0
[ 69.890] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 69.899] Current Operating System: Linux desktop 2.6.34-ARCH #1 SMP PREEMPT Wed Aug 4 14:31:56 CEST 2010 x86_64
[ 69.910] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 69.921] Build Date: 21 June 2010 12:01:49PM
[ 69.933]
[ 69.944] Current version of pixman: 0.18.2
[ 69.957] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 69.982] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 70.025] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 22:35:08 2010
[ 70.057] (==) Using config file: "/etc/X11/xorg.conf"
[ 70.072] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 70.117] (==) ServerLayout "Layout0"
[ 70.117] (**) |-->Screen "Screen0" (0)
[ 70.117] (**) | |-->Monitor "Monitor0"
[ 70.117] (**) | |-->Device "Device0"
[ 70.117] (**) |-->Input Device "Keyboard0"
[ 70.117] (**) |-->Input Device "Mouse0"
[ 70.117] (==) Automatically adding devices
[ 70.118] (==) Automatically enabling devices
[ 70.145] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.168] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 70.168] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 70.168] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 70.168] (WW) Disabling Keyboard0
[ 70.168] (WW) Disabling Mouse0
[ 70.168] (II) Loader magic: 0x7ce880
[ 70.168] (II) Module ABI versions:
[ 70.168] X.Org ANSI C Emulation: 0.4
[ 70.168] X.Org Video Driver: 7.0
[ 70.168] X.Org XInput driver : 9.0
[ 70.168] X.Org Server Extension : 3.0
[ 70.185] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 70.186] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 70.186] (II) LoadModule: "extmod"
[ 70.200] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 70.211] (II) Module extmod: vendor="X.Org Foundation"
[ 70.211] compiled for 1.8.1.902, module version = 1.0.0
[ 70.211] Module class: X.Org Server Extension
[ 70.211] ABI class: X.Org Server Extension, version 3.0
[ 70.211] (II) Loading extension MIT-SCREEN-SAVER
[ 70.211] (II) Loading extension XFree86-VidModeExtension
[ 70.211] (II) Loading extension XFree86-DGA
[ 70.211] (II) Loading extension DPMS
[ 70.211] (II) Loading extension XVideo
[ 70.211] (II) Loading extension XVideo-MotionCompensation
[ 70.211] (II) Loading extension X-Resource
[ 70.211] (II) LoadModule: "dbe"
[ 70.211] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 70.218] (II) Module dbe: vendor="X.Org Foundation"
[ 70.218] compiled for 1.8.1.902, module version = 1.0.0
[ 70.219] Module class: X.Org Server Extension
[ 70.219] ABI class: X.Org Server Extension, version 3.0
[ 70.219] (II) Loading extension DOUBLE-BUFFER
[ 70.219] (II) LoadModule: "glx"
[ 70.219] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 71.100] (II) Module glx: vendor="NVIDIA Corporation"
[ 71.111] compiled for 4.0.2, module version = 1.0.0
[ 71.111] Module class: X.Org Server Extension
[ 71.111] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 71.111] (II) Loading extension GLX
[ 71.111] (II) LoadModule: "record"
[ 71.111] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 71.125] (II) Module record: vendor="X.Org Foundation"
[ 71.125] compiled for 1.8.1.902, module version = 1.13.0
[ 71.125] Module class: X.Org Server Extension
[ 71.125] ABI class: X.Org Server Extension, version 3.0
[ 71.125] (II) Loading extension RECORD
[ 71.125] (II) LoadModule: "dri"
[ 71.126] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 71.140] (II) Module dri: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.0.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension XFree86-DRI
[ 71.140] (II) LoadModule: "dri2"
[ 71.140] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 71.140] (II) Module dri2: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.2.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension DRI2
[ 71.140] (II) LoadModule: "nvidia"
[ 71.141] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 71.187] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 71.189] compiled for 4.0.2, module version = 1.0.0
[ 71.189] Module class: X.Org Video Driver
[ 71.207] (II) NVIDIA dlloader X Driver 256.44 Thu Jul 29 01:24:51 PDT 2010
[ 71.207] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 71.207] (--) using VT number 7
[ 71.260] (II) Primary Device is: PCI 00@00:05:0
[ 71.269] (II) Loading sub module "fb"
[ 71.269] (II) LoadModule: "fb"
[ 71.269] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 71.281] (II) Module fb: vendor="X.Org Foundation"
[ 71.281] compiled for 1.8.1.902, module version = 1.0.0
[ 71.281] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.281] (II) Loading sub module "wfb"
[ 71.281] (II) LoadModule: "wfb"
[ 71.281] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 71.289] (II) Module wfb: vendor="X.Org Foundation"
[ 71.289] compiled for 1.8.1.902, module version = 1.0.0
[ 71.289] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.289] (II) Loading sub module "ramdac"
[ 71.289] (II) LoadModule: "ramdac"
[ 71.289] (II) Module "ramdac" already built-in
[ 71.309] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 71.309] (==) NVIDIA(0): RGB weight 888
[ 71.309] (==) NVIDIA(0): Default visual is TrueColor
[ 71.309] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 71.309] (**) NVIDIA(0): Enabling RENDER acceleration
[ 71.309] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 71.309] (II) NVIDIA(0): enabled.
[ 72.040] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 (C51) at PCI:0:5:0 (GPU-0)
[ 72.040] (--) NVIDIA(0): Memory: 262144 kBytes
[ 72.040] (--) NVIDIA(0): VideoBIOS: 05.51.22.33.07
[ 72.040] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 72.040] (--) NVIDIA(0): Connected display device(s) on GeForce 6150 at PCI:0:5:0:
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0)
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): 310.0 MHz maximum pixel clock
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): Internal Dual Link TMDS
[ 72.044] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 72.044] (==) NVIDIA(0):
[ 72.044] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 72.044] (==) NVIDIA(0): will be used as the requested mode.
[ 72.044] (==) NVIDIA(0):
[ 72.044] (II) NVIDIA(0): Validated modes:
[ 72.044] (II) NVIDIA(0): "nvidia-auto-select"
[ 72.044] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 72.045] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 72.045] (--) NVIDIA(0): option
[ 72.045] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 72.045] (--) Depth 24 pixmap format is 32 bpp
[ 72.052] (II) NVIDIA(0): Initialized GPU GART.
[ 72.055] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 72.055] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 72.055] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 72.055] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 72.055] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 72.055] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 72.055] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 72.055] (II) NVIDIA(0): Config Options in the README.
[ 72.056] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 72.178] (EE) NVIDIA(0): Failed to allocate primary buffer: out of memory.
[ 72.178] (EE) NVIDIA(0): *** Aborting ***
[ 72.178]
Fatal server error:
[ 72.178] AddScreen/ScreenInit failed for driver 0
[ 72.178]
[ 72.178]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 72.178] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 72.178]
As it's mentioned, it may be a problem of ACPI.
About the lib32-nvidia-utils, I just installed because it's written in the wiki http://wiki.archlinux.org/index.php/NVIDIA#Installing: "Note: On 64 bit systems, For 32-bit programs to take advantage of nvidia-utils you must also install the equivalent lib32 package (for example lib32-nvidia-utils)." -
Failed to initialize the network. Check if another instance of agent is
Out of the blue a small number of my Windows XP PCs get the following error
when logging in. Usually appears while login script page is on screen:-
Failed to initialize the network. Check if another instance of agent is
running. Contact the system administrator
Once XP has loaded ok I can manually start the Remote Management service.
Some PCs are intermittent and don't seem to get it again but a couple get it
every login. I removed the client and reinstalled. I removed the Remote
Management service and re-installed. Re-registered the PC Workstation but no
change for those who get it every day.
I did find this:-
Failed to initialize the network. Check if another instance of agent is
running. Contact the system administrator
Source: Remote Management Agent
Severity: Critical
Possible Cause: The Remote Management Agent is unable to bind to the IPX or
IP port that is being used for Remote Management service, or the ports are
being used by some other application running on the managed workstation.
Action: Uninstall any third-party remote control agent or remote control
application using these ports from the managed workstation.
Possible Cause: The protocol stack is corrupted.
Action: Reinstall the protocol stack.
Possible Cause: The managed workstation is not connected to the network, or
the network is down.
Action: Connect the managed workstation to the network.
I don't have any third party remote control agent installed and I've tried
the refresh of the IP protocol stack. Surprised this has started as we have
not made any changes to the network or software. We run NW Client 4.83sp1
and NW5.1 sp5.
Anybody else had this and cleared it completely?Further developments:
It looks like it's a fault in the nic. it's a Compaq NC3120 Fast Ethernet
card. It used to work, but since I've wiped out the card drivers that were
in use, I'm at HP's mercy. They are telling me that the card is no longer
under warranty and won't even tell me what driver to look for. Anything I've
managed to find has the exact same symptoms:
Client works, ping to IP addresses work, ping to www.yahoo.com (etc) doesn't
work, although winipcfg shows a DNS server the same as every other machine I
have.
Internet explorer doesn't work, even with IP addresses to local servers.
And of course, zenrc32 doesn't work, wsreg32 doesn't work.
Does anyone know of a way of making the NC3120 work on a win98 machine?
Shall I just go buy a couple dozen netcards from a more reputable company
than compaq?
Chris Denby
IT Coordinator
Rainy River District School Board
Fort Frances, Ontario
Canada
"Chris Denby" <[email protected]> wrote in message
news:[email protected]...
> I have this message on windows 98. In addition to that, the wsreg32.log
> reads work station import error -1 (UNKNOWN).
> This happened after ghosting down to the machine and finding that it had a
> different card. The client adapted easily to a new card, but the
zenrc32.exe
> won't run.
>
> I've checked to make sure it wasn't running by renaming the zenrc32.exe to
> zenrc32.ex so it wouldn't run on start up. Then after the machine was
> started up, I changed it back and ran it and it died immediately with the
> same error.
>
> I have uninstalled the client through admin\unc32 and removed all traces
of
> the client then reinstalling, but no luck.
>
>
> <[email protected]> wrote in message
> news:1XuQc.3739$8%[email protected]...
> > Did you ever get this solved?
> > I've got the same thing going on with one Win2000 machine in my
> > department. He can log into the network just fine but can not get to the
> > internet.
> > I've tried re-installing the protocol stack; no luck. I've searched hi
and
> > low for any other agent running on the machine with no luck. I've
searched
> > the registry for hours for all keys that would start programs or agents
at
> > start. Can't find anything. I've check for services, checked for fire
wall
> > problems, viruses. No luck. Since its only one machine I can re-image it
> > with no problem, but I'm curious and want to find out whats going on in
> > case the problem reapears or grows to other machines.
> > Any help out there???
> >
> > > Out of the blue a small number of my Windows XP PCs get the following
> > error
> > > when logging in. Usually appears while login script page is on
screen:-
> > >
> > > Failed to initialize the network. Check if another instance of agent
is
> > > running. Contact the system administrator
> > >
> > > Once XP has loaded ok I can manually start the Remote Management
> service.
> > > Some PCs are intermittent and don't seem to get it again but a couple
> > get it
> > > every login. I removed the client and reinstalled. I removed the
Remote
> > > Management service and re-installed. Re-registered the PC Workstation
> > but no
> > > change for those who get it every day.
> > >
> > > I did find this:-
> > >
> > > Failed to initialize the network. Check if another instance of agent
is
> > > running. Contact the system administrator
> > >
> > > Source: Remote Management Agent
> > >
> > > Severity: Critical
> > >
> > > Possible Cause: The Remote Management Agent is unable to bind to the
IPX
> > or
> > > IP port that is being used for Remote Management service, or the ports
> > are
> > > being used by some other application running on the managed
workstation.
> > >
> > > Action: Uninstall any third-party remote control agent or remote
control
> > > application using these ports from the managed workstation.
> > >
> > > Possible Cause: The protocol stack is corrupted.
> > >
> > > Action: Reinstall the protocol stack.
> > >
> > > Possible Cause: The managed workstation is not connected to the
network,
> > or
> > > the network is down.
> > >
> > > Action: Connect the managed workstation to the network.
> > >
> > > I don't have any third party remote control agent installed and I've
> > tried
> > > the refresh of the IP protocol stack. Surprised this has started as we
> > have
> > > not made any changes to the network or software. We run NW Client
> 4.83sp1
> > > and NW5.1 sp5.
> > >
> > > Anybody else had this and cleared it completely?
> > >
> > >
> > >
> > >
> > >
> >
>
> -
FRM-18103 failed to initialize the development environment
OS: windows 7 ultimate
Just installed Database 11gR2 and Oracle Developer Suite 10g (10.1.2.0.2) in different homes.
When starting forms builder i get the error:
FRM-18103 failed to initialize the development environment.
Starting OC4J instance didn't make any difference.
Can anybody help please?First and foremost, Oracle Developer Suite (ODS) 10g R2 is not certified by Oracle for Windows 7. That doesn't mean it won't work, it just means if you have a problem, you will have a hard time getting support from Oracle since they do not support ODS 10g on Windows 7.
Now that I've gotten that out of the way, how did you install ODS? Did you need to follow the instructions for installing ODS on Windows Vista - which is supported. The basic steps are:
1. Manually set the Virtual Memory - the Oracle Installer can't detect the VM when it is managed by Windows.
2. Right-Click the setup.exe and choose Properties -> Compatability and check "Run the program in compatibility mode for: Windows XP" check box.
3. While in Properties - check the "Run this program as an Administrator" check box.
If you didn't perform these three steps, you will need to uninstall and reinstall. It is also highly recommended that you install ODS patchset 3 as well (version 10.1.2.3.x).
FRM-18103 failed to initialize the development environment.Most likely, this is an OS permissions issue. After installation, right-click the DevSuiteHome_10g folder, choose properties and Security. Check the group privileges to ensure that ALL Users have Full Control on the directory and all subdirectorys.
Also, IE8 does not support Oracle Jinitiator so you will need to install the Sun JRE 1.6.0_16 or higher to be able to run forms from the Forms Builder.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Dec 15, 2010 9:01 AM -
Failed to initialize the orb--please reply its urgent
hi im using a stand alone java application to access a jndi data source configured on websphere 6.1
im getting the following error
failed to initialize the ORB...
most of the solutions i got suggest to change from sun jdk to ibm jdk.BUT BUT how do we do that and what are the steps to be followed.
he code im using is given below:
//WebsphereJNDI.java
import java.sql.*;
import java.util.*;
import javax.sql.*;
import javax.naming.*;
import javax.rmi.*;
public class WebSphereJNDI
private String websphere_server;
private String jndi_datasource;
private String sql_query;
WebSphereJNDI(String serverpath, String jndiname, String query)
websphere_server = serverpath;
jndi_datasource = jndiname;
sql_query = query;
public ResultSet get_data() throws Exception
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.ibm.websphere.naming.WsnInitialContextFactory");
env.put(Context.PROVIDER_URL, websphere_server);
InitialContext ctx = new InitialContext(env);
DataSource ds = (DataSource) ctx.lookup(jndi_datasource);
Connection conn = ds.getConnection();
Statement stm = conn.createStatement();
ResultSet res = stm.executeQuery(sql_query);
// moving cursor to first row
res.next();
return res;
// ResultSetTester.java
import java.sql.*;
import java.util.*;
import javax.sql.*;
import javax.naming.*;
import javax.rmi.*;
public class ResultSetTester {
public static void main(String[] args) throws Exception {
WebSphereJNDI test = new WebSphereJNDI(
"http://hostname:port no.", "jdbc/mydatasource",
"SELECT * FROM pubs.dbo.authors");
System.out.println(dump_data(test.get_data()));
public static String dump_data(java.sql.ResultSet rs)
throws Exception {
int rowCount = 0;
String result = "";
result += "<P ALIGN='center'><TABLE BORDER=1>";
ResultSetMetaData rsmd = rs.getMetaData();
int columnCount = rsmd.getColumnCount();
// table header
result += "<TR>";
for (int i = 0; i < columnCount; i++) {
result += "<TH>" +
rsmd.getColumnLabel(i + 1) + "</TH>";
result += "</TR>";
// the data
while (rs.next()) {
rowCount++;
result += "<TR>";
for (int i = 0; i < columnCount; i++) {
result += "<TD>" +
rs.getString(i + 1) + "</TD>";
result += "</TR>";
result += "</TABLE></P>";
return result;
Im an amateur...Please help its urgentThanks Anuj.
We use OSB apps (exported as jars only).
We place the jars in domain/lib to be available for all services in this domain.
Is there another place we can put our jars in it?? and how can we solve the problem of soa infra with using Spring 3.2 ??
Thanks in advance. -
Failed to initialize the Fetchlet Manager while starting agent
Hi all,
I am getting following error message while starting an agent. This agent installation gets failed at the point of starting agent. Normally this happens when the dns /hostfile entry have any problems and I made sure those things are OK.
This agent is on a Solaris server and all other similar servers are working fine. Have anyone came across this situation?
$ emctl start agent
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Starting agent ........ failed.
Failed to initialize the Fetchlet Manager.
Consult the log files in: /u01/oracle/product/agent10g/sysman/logcat emagent.trc
2009-12-04 12:25:54 Thread-1 ERROR util.files: ERROR: nmeufis_new: failed in lfi opn on file: /u01/oracle/product/agent10g/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
2009-12-04 12:25:54 Thread-1 ERROR pingManager: nmepm_pingReposURL: Did not rece ive a response header from repository
2009-12-04 12:25:54 Thread-1 WARN command: Job Subsystem Timeout set at 600 sec onds
2009-12-04 12:25:54 Thread-1 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
2009-12-04 12:25:54 Thread-1 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager -
Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
This is on two (2) separate machines. These are NEW INSTALLATION development work stations (laptops). One is Vista (Visual Studio 2008 / Crystal Reports 2008), and the other is Windows XP Pro (Visual Studio 2003 / Crystal Reports XI R1).
I am using EXISTING CODE (established over several years), and EXISTING REPORTS (established over several years). Old development station was XP Pro, as above, and still exists, and still works fine.
I can open the report in Crystal, and see the results just fine. Data for the report is obtained via ODBC.
Can someone identity the actual error by the Error Code above, and advise. Thanks You in Advance.Ok, so let's start at step 1:
SP 1 just released and I'd recommend applying that. The SO is available from here:
https://smpdl.sap-ag.de/~sapidp/012002523100010503722008E/cr2008_sp1.exe
For future reference, msm matching the above SP is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011715292008E/cr121_mm.zip
and msi is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011722132008E/cr121_redist_install.zip
Step 2: a few questions:
a) I am not sure what CR SDK you are using; RDC, .NET? I suspect that you are using the CR assemblies for .NET, but do confirm.
b) what is the database you are connecting to?
c) is this a web or a win app?
Step 3: As the error can mean any number of things (to me it's just means something went wrong during the attempt to connect to the database...), the solution may vary, however the troubleshooting steps remain quite consistent:
1) Do make sure the report is indeed working in the CR 2008 designer (e.g.; make sure "saved data" is not enabled.
2) Try a simple new windows app with one of your reports. See if you have a report with no subreports and use it
3) If that works, use a report with subreports
4) If the above does not work in (1) above, create a new report to the same ODBC connection, do not code any database connection - let the report prompt for the logon parameter (PWD)
5) Run the new report in your new app, enter the PWD when prompted
6) If this works, add your database logon code
7) If that works, add your original report (again, preferably with no subreports)
8) If that fails, ensure that the subreport and main report use the same database connection type (ODBC)
9) If it works, see if you can determine the difference between your old app and the new app.
Ludek -
Failed to initialize the application 'soa-infra' for SOA suite 11g
Hello experts!
Having followed the steps in http://www.packtpub.com/article/installation-configuration-oracle-soa-suite-11g-1,
upon starting the cmd scripts, I received among others the following error message:
<BEA-149205> <Failed to initialize the application 'soa-infra' due to error java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;.
java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;
at oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener.preStart(JpsApplicationLifecycleListener.java:76)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:277)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:194)
at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:57)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:279)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:609)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:53)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.lang.NoSuchMethodError:
I have searched but only to find a change permissions hint which did not work for me. SOA 11g - SOA-INFRA is not starting
Any helping hand available?
Thank you very much in advance!
The fuller log follows:
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <WebLogicServer> <Hera> <> <main> <> <> <> <1270482051581> <BEA-000214> <WebLogic Server "soa_server1" version:
WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Notice> <Log Management> <Hera> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1270482051644> <BEA-170019> <The server log file C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\logs\soa_server1.log is opened. All server side log events will be written to this file.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Log Management> <Hera> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1270482051644> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Diagnostics> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051691> <BEA-320001> <The ServerDebug service initialized successfully.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Store> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051753> <BEA-280050> <Persistent store "WLS_DIAGNOSTICS" opened: directory="C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\data\store\diagnostics" writePolicy="Disabled" blockSize=512 directIO=false driver="wlfileio2">
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "t3" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "t3s" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "http" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "https" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "iiop" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "iiops" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "ldap" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "ldaps" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "cluster" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "clusters" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002622> <The protocol "snmp" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002622> <The protocol "admin" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <RJVM> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051862> <BEA-000570> <Network Configuration for Channel "soa_server1"
Listen Address :8001
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051878> <BEA-002609> <Channel Service initialized.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051878> <BEA-000406> <NTSocketMuxer was built on Jan 13 2005 17:47:03
>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051941> <BEA-000436> <Allocating 5 reader threads.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051942> <BEA-000446> <Native IO Enabled.>
####<5 Απρ 2010 6:40:52 μμ EEST> <Info> <IIOP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482052098> <BEA-002014> <IIOP subsystem enabled.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053408> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053704> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053751> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_VFJSY8asFO+H8NVntiPFSkiIk0o=>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053923> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053985> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Top".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.DomainRealmScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.RegistryScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKITypeScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLTypeScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Credential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.CredentialMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLAssertingParty".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLRelyingParty".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.UserPasswordCredential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredentialMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.ResourceMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKIResourceMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCertRegEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCredMapCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSPolicyCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSRoleCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLAuthorizationPolicy".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLRoleAssignmentPolicy".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Endpoint".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Partner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SPPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.IdPPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SAML2CacheEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SchemaVersion".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054453> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054469> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054578> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server soa_server1 for security realm myrealm.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Notice> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054578> <BEA-090082> <Security initializing using security realm myrealm.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054750> <BEA-002622> <The protocol "[snmp, https, t3, cluster-broadcast-secure, ldaps, cluster-broadcast, ldap, http, iiop, admin, t3s, iiops]" is now configured.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <XML> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054750> <BEA-130036> <Initializing XMLRegistry.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <messaging.interception> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054765> <BEA-400000> <Initializing message interception service>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Store> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055015> <BEA-280050> <Persistent store "_WLS_soa_server1" opened: directory="C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\data\store\default" writePolicy="Direct-Write" blockSize=512 directIO=true driver="wlfileio2">
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001135> <Initializing the JDBC service.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001137> <Initialization complete.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001138> <Resuming the JDBC service.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001140> <Resume complete.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Connector> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055264> <BEA-190000> <Initializing J2EE Connector Service>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Connector> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055280> <BEA-190001> <J2EE Connector Service initialized successfully>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055327> <BEA-040305> <JMS service is initialized and in standby mode.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055342> <BEA-040090> <Deployed 8 default connection factories.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory1" with its JNDI name "weblogic.jms.XAConnectionFactory1" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040306> <JMS service is active now.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055389> <BEA-101128> <Initializing HTTP services.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101135> <soa_server1 is the default Web server.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101052> <[HttpServer (defaultWebserver) name: soa_server1] Initialized>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101129> <Initializing the Web application container.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: Logging service enabled.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Task Manager instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC security service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Transaction service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebService> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055436> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebService> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055436> <BEA-220027> <Web Service reliable agents are started on the server.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMX> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055467> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://192.168.1.2:8001/jndi/weblogic.management.mbeanservers.runtime .>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055483> <BEA-000256> <Invoking oracle.jrf.wls.JRFStartup.main(null)>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055514> <BEA-000256> <Invoking oracle.security.jps.wls.JpsWlsStartupClass.main(null)>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055530> <BEA-000256> <Invoking oracle.core.ojdl.weblogic.ODLConfiguration.main(null)>
####<5 Απρ 2010 6:40:56 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482056684> <BEA-000256> <Invoking oracle.jrf.AppContextStartup.main(null)>
####<5 Απρ 2010 6:40:56 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] EThank you for your reply!
The tutorial emphasizes that I need jdk 1.6 update 11 in order to setup.
The newer release of wl server comes with jsk 1.6 update 14.
When I tried to run:
setup -jreLoc C:\Oracle\Middleware\home_11gR1\jdk160_14
no setup screen appeared.
Next, I setup stand alone jdk 1.6 update 11 and add it to path,
but setup -jreLoc C:\Program Files\Java\jdk1.6.0_11 failed too, since no setup screen appeared
So I uninstalled version 10.3.2, installed 10.3.1 to follow exactly the tutorial specs.
Does one has to pay oracle consulting, in order to have an installation of soa suite up and running for development?
Edited by: Nick Aiva on Apr 6, 2010 11:27 AM -
Error when creating a resource : Failed to initialize the DSDL
Hi,
I've configured a cluster and trying to configure an Oracle mount point. ,ve already created the listerner and server resources for Oracle but having the following error with mount point creation:
Command executed: /usr/cluster/bin/clresource create -t SUNW.HAStoragePlus:5
-g int_group -p
Resource_project_name=default -p FilesystemMountPoints=/global/data
oracle_mount_point
Error message:
clresource: pegase-par-sun-wfl-int-a - Failed to process the resource
information.Failed to
initialize the DSDL.
clresource: (C189917) VALIDATE on resource oracle_mount_point, resource
group int_group, exited with
non-zero exit status.
clresource: (C720144) Validation of resource oracle_mount_point in resource
group int_group on node
pegase-par-sun-wfl-int-a failed.
clresource: (C891200) Failed to create resource "oracle_mount_point"
Could you please help me?should i have to install a particular library or something like that? DSDL ?
thanks for your help -
Hi All,
I have SAP MDM 5.5 with SQL server 2005. The MDM server is up (it shows the green node) and I have started the SQL server and SQL agent.
When I click on any of the repository e.g. vendor, and enter the user as Admin, then it throws the following error on pop up.
"Repository login failed, please try again.
Error: - The MDM repository is invalid"
When I click the DBMS setting, it gives the option of my local instance on the SQL server. Then it prompts me to enter the log path and the data path. After entering, it gives an error
"Failed to initialize the DBMS"
The path for log and data file which I am giving
Log file- C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\kolkata_mdm_log.ldf
data:- C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\kolkata_mdm.mdf
Please suggest.
Regards,
JitenderHello Jitendra,
you have to define the Log path and data path as (suppose if you have installed the MDM server in C drive):
C:\Program Files\SAP MDM 5.5\Server\Archives
or you can refer the guide avialable on SMP:
For installation and configuration guides:
https://websmp201.sap-ag.de/~sapidb/011000358700004121872006E.HTM
Also you can refer the Sizing and Performance guide for MDM 5.5.
http://service.sap.com/~sapidb/011000358700001191122007E
Hope this will help you.
TNR,
Saurabh...
Reward if found useful. -
Failed to initialize the XPath Expression Builder
Any idea what causes this and/or how to fix it?
When I am in the XPath Expression Builder, I pick "Conversion Functions" and start with "string". Inside the "string()" parentheses, I do "bpws:getVariableData()", and select my output variable from an invoke.
Then it SHOULD allow me to continue picking parts of that variable, down to the node I want, but instead I see in my JDeveloper log that a "Failed to initialize the XPath Expression Builder" error has been thrown.
Thoughts appreciated...
SmallsCan any of you Oracle guys help with this today?
-
Failed to initialize the application
Hi, I created one managed server and deployed one application but when I want start the managed_server from console administration I obtain the following error:
####<Apr 22, 2010 10:14:28 AM EDT> <Error> <Deployer> <server2> <new_app> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271945668354> <BEA-149205> <Failed to initialize the application 'new_app [Version=V2.0]' due to error weblogic.management.DeploymentException: .
weblogic.management.DeploymentException:
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:176)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:104)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:103)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListeners(HeadLifecycleFlow.java:175)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:281)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1221)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:54)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:254)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.lang.ClassNotFoundException: oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:247)
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:140)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:104)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:103)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListeners(HeadLifecycleFlow.java:175)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:281)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1221)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:54)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:254)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
but when I startup the managed server from command line, he work fine and the app startup and work fine.
What can be the cause of this?
Thanks any helpHi,
Seems that the Classpath is not taking affect in case of remote start option (AdminConsole start)...
<font color=maroon><b>Option-1). </b></font><BR>
*1).* start the Managed Server from the StartScript....
*2).* look at the Out file first few lines...you will see the CLASSPATH values...
*3).* Copy that ClassPath and then Login to AdminConsole...
Login to AdminConsole–>Environments—.Servers—>YourManagedServer—>Configuration (TAB)—>ServerStart (SubTab)—> Classpath:(TextArea)
Paste the Classpath here in the TextArea...then restart your Server.
Just inacse if the Option 1 Doesn't work ..Then try the Option-2
<font color=maroon><b>Option-2).</b></font> If above also didn’t work then please try to add the following 2 entry in the *“nodemanager.properties”* file and in startWebLogic.sh (or your ManagedServer StartScript Name)
<font color=maroon>
StartScriptName=startWebLogic.sh
StartScriptEnabled=true
</font>
restart your saerver.
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com/2010/03/26/nodemanager-based-managedservers-setting-mem_args/ (WebLogic Wonders Are Here)
Maybe you are looking for
-
Music from hard drive to new iTunes account
I have just set up a new iTunes account for my mum on her new windows laptop it doesn't have a cd burner so have copied some of her CDs onto a external hard drive however having trouble transferring music from hard drive into iTunes any suggestions?
-
Add Customized fields in FICA document
Dear all, We are having a requirement in which we need to add customized fields in FICA document and need to post them .Can anyone please tell me how to meet this requirement susmita Edited by: susmitha harini on Aug 11, 2010 12:46 PM
-
Scanning and Copy never start on Office Jest 6700
When I go to copy or scan on my Office Jet 6700. I am unable to do so. Te scanner/copier says that it is "Starting Copying..." or "Starting Scanning" but it does nothing...I have tried turing off and on, unpluging, reseting to factory settings, etc.
-
How can I get podcasts listed in my library?
I would like to get podcasts but can't find a way to get them listed in my library. I have the latest version they say. I really hope someone can help me.
-
Using Field Blend plug-in, any side effects?
Cutting an HDV show with lots of action. Camera may have had 'sharpen' mode set too high, but end result is that the action scenes show way too much of the 'interlace lines' in playback on an LCD screen. Distractingly so. I used the Field Blend plug-