Xorg problems.

I have some problems with my xorg file, and X will not start. I am running an Ati x1400 using the new catalyst drivers, here is a copy of the xorg log and my xorg.conf. Any help would be greatly appreciated.
Xorg log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux myhost 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 12 17:59:21 2008
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1028,01bd rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,27a1 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1b:0: chip 8086,27d8 card 1028,01bd rev 01 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,27d6 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1028,01bd rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1028,01bd rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e1 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1028,01bd rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1028,01bd rev 01 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1028,01bd rev 01 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,7145 card 1028,2003 rev 00 class 03,00,00 hdr 00
(II) PCI: 03:00:0: chip 14e4,170c card 1028,01af rev 02 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 1180,0832 card 1028,01bd rev 00 class 0c,00,10 hdr 80
(II) PCI: 03:01:1: chip 1180,0822 card 1028,01bd rev 19 class 08,05,01 hdr 80
(II) PCI: 03:01:2: chip 1180,0592 card 1028,01bd rev 0a class 08,80,00 hdr 80
(II) PCI: 03:01:3: chip 1180,0852 card 1028,01bd rev 05 class 08,80,00 hdr 80
(II) PCI: 0b:00:0: chip 14e4,4311 card 1028,0007 rev 01 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,12), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfd00000 - 0xdfefffff (0x200000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 11: bridge is at (0:28:0), (0,11,11), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 11 non-prefetchable memory range:
[0] -1 0 0xdfc00000 - 0xdfcfffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 12: bridge is at (0:28:3), (0,12,13), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 12 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 12 non-prefetchable memory range:
[0] -1 0 0xdfa00000 - 0xdfbfffff (0x200000) MX[b]
(II) Bus 12 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd01fffff (0x200000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xdf900000 - 0xdf9fffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon Mobility X1400 rev 0, Mem @ 0xc0000000/28, 0xdfdf0000/16, I/O @ 0xee00/8
List of video drivers:
fglrx
vesa
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.50.3
Module class: X.Org Video Driver
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xdfcfc000 - 0xdfcfffff (0x4000) MX[b]
[1] -1 0 0xdf9fd700 - 0xdf9fd7ff (0x100) MX[b]
[2] -1 0 0xdf9fd600 - 0xdf9fd6ff (0x100) MX[b]
[3] -1 0 0xdf9fd500 - 0xdf9fd5ff (0x100) MX[b]
[4] -1 0 0xdf9fd800 - 0xdf9fdfff (0x800) MX[b]
[5] -1 0 0xdf9fe000 - 0xdf9fffff (0x2000) MX[b]
[6] -1 0 0xffa80000 - 0xffa803ff (0x400) MX[b]
[7] -1 0 0xdfffc000 - 0xdfffffff (0x4000) MX[b]
[8] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[b](B)
[9] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[10] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
[11] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[12] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[13] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[14] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[16] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[17] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[18] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[b]
[19] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[20] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfcfc000 - 0xdfcfffff (0x4000) MX[b]
[1] -1 0 0xdf9fd700 - 0xdf9fd7ff (0x100) MX[b]
[2] -1 0 0xdf9fd600 - 0xdf9fd6ff (0x100) MX[b]
[3] -1 0 0xdf9fd500 - 0xdf9fd5ff (0x100) MX[b]
[4] -1 0 0xdf9fd800 - 0xdf9fdfff (0x800) MX[b]
[5] -1 0 0xdf9fe000 - 0xdf9fffff (0x2000) MX[b]
[6] -1 0 0xffa80000 - 0xffa803ff (0x400) MX[b]
[7] -1 0 0xdfffc000 - 0xdfffffff (0x4000) MX[b]
[8] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[b](B)
[9] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[10] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
[11] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[12] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[13] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[14] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[16] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[17] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[18] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[b]
[19] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[20] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xdfcfc000 - 0xdfcfffff (0x4000) MX[b]
[5] -1 0 0xdf9fd700 - 0xdf9fd7ff (0x100) MX[b]
[6] -1 0 0xdf9fd600 - 0xdf9fd6ff (0x100) MX[b]
[7] -1 0 0xdf9fd500 - 0xdf9fd5ff (0x100) MX[b]
[8] -1 0 0xdf9fd800 - 0xdf9fdfff (0x800) MX[b]
[9] -1 0 0xdf9fe000 - 0xdf9fffff (0x2000) MX[b]
[10] -1 0 0xffa80000 - 0xffa803ff (0x400) MX[b]
[11] -1 0 0xdfffc000 - 0xdfffffff (0x4000) MX[b]
[12] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[b](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x000010c0 - 0x000010df (0x20) IX[b]
[17] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[18] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[19] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[20] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[23] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[24] -1 0 0x0000bf60 - 0x0000bf7f (0x20) IX[b]
[25] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[26] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[b](B)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.50.3
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.501
(II) ATI Proprietary Linux Driver Build Date: Jun 2 2008 22:46:56
(**) ChipID override: 0x7145
(**) Chipset Supported AMD Graphics Processor (0x7145) found
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) ATI Proprietary Linux Driver Version Identifier:8.50.3
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.501
(II) ATI Proprietary Linux Driver Build Date: Jun 2 2008 22:46:56
(--) Chipset Supported AMD Graphics Processor (0x7145) found
Number of created screens does not match number of detected devices.
Configuration failed.
And the xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "GLcore"
Load "glx"
Load "record"
Load "dbe"
Load "xtrap"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "NoDRI" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "DRM_nbufs" # 
#Option "DRM_bufsize" # 
#Option "Capabilities" # 
#Option "CapabilitiesEx" # 
#Option "ClientDriverName" # [<str>]
#Option "KernelModuleParm" # [<str>]
#Option "AGPMask" # 
#Option "AGPv3Mask" # 
#Option "BufferTiling" # [<bool>]
#Option "Profile" # <str>
#Option "RingSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "GammaCorrectionI" # 
#Option "GammaCorrectionII" # 
#Option "OpenGLOverlay" # [<bool>]
#Option "DefaultVisualTrueColor" # [<bool>]
#Option "VideoOverlay" # [<bool>]
#Option "DesktopSetup" # [<str>]
#Option "MonitorLayout" # [<str>]
#Option "ForceMonitors" # [<str>]
#Option "EnableMonitor" # <str>
#Option "OverlayOnCRTC2" # [<bool>]
#Option "Mode2" # [<str>]
#Option "PairModes" # [<str>]
#Option "HSync2" # [<str>]
#Option "VRefresh2" # [<str>]
#Option "ScreenOverlap" # 
#Option "MemClock" # 
#Option "ASICClock" # 
#Option "UseInternalAGPGART" # [<bool>]
#Option "FastSwap" # [<bool>]
#Option "Stereo" # [<bool>]
#Option "StereoSyncEnable" # 
#Option "DisableOvScaler" # [<bool>]
#Option "UseFastTLS" # 
#Option "BlockSignalsOnLock" # [<bool>]
#Option "ForceGenericCPU" # [<bool>]
#Option "CenterMode" # [<bool>]
#Option "OffScreenPixmaps" # [<bool>]
#Option "EnableOpaqueOverlayVisual" # [<bool>]
#Option "TMDSCoherentMode" # [<bool>]
#Option "EnablePrivateBackZ" # [<bool>]
#Option "TVFormat" # [<str>]
#Option "TVStandard" # [<str>]
#Option "TVOverscan" # [<bool>]
#Option "TVHSizeAdj" # 
#Option "TVVSizeAdj" # 
#Option "TVHPosAdj" # 
#Option "TVVPosAdj" # 
#Option "TVHStartAdj" # 
#Option "TVColorAdj" # 
#Option "PseudoColorVisuals" # [<bool>]
#Option "PreferredVRefresh" # 
#Option "FastStart" # [<bool>]
#Option "ProfileDriver" # [<bool>]
#Option "PPPTforGART" # [<bool>]
#Option "TexturedVideo" # [<bool>]
#Option "TexturedVideoSync" # [<bool>]
#Option "Textured2D" # [<bool>]
#Option "TexturedXrender" # [<bool>]
#Option "DPMS" # [<bool>]
#Option "MaxGARTSize" # 
#Option "LogoPosX" # 
#Option "LogoPosY" # 
#Option "LogoColFG" # 
#Option "LogoColBG" # 
#Option "SwapScreens" # [<bool>]
#Option "FBC" # [<bool>]
#Option "FrontBufferMode" # 
#Option "BackBufferMode" # 
#Option "DepthBufferMode" # 
#Option "OverlayBufferMode" # 
#Option "VideoOverlayBufferMode" # 
#Option "EnableIrqMgr" # [<bool>]
#Option "EnableMulticard" # [<bool>]
#Option "EnablePPLIB" # [<bool>]
#Option "DefaultOnDC" # [<bool>]
#Option "EnableRandR12" # [<bool>]
#Option "DisableRotation" # [<bool>]
#Option "EnableCrossFire" # [<bool>]
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X1400"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Edit: I fixed it by removing the vesa driver from the drivers folder, then by doing aticonfig --initial and renaming the new xorg.conf.fglrx-1 named by the aticonfig to xorg.conf and adding the lines
Section "DRI"
Mode 0666
EndSection
After that I just typed "startx" and it worked fine.
Last edited by cyclotomic (2008-07-13 02:35:50)

From what i can see on your xorg.conf it seems to be missing some information. There is no configuration for the monitors HorizSync or VertRefresh in the monitor section and there is no resolution modes configured in the Screen section. And further no default depth is set either. Ive never used the catalyst driver due to i have an old laptop whit an old ati but my xorg.conf looks something like this.
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Oh and i noticed there was som problems whit the type1 font in your log file so it might be good idea to put a # infront of it when you start configuring the xorg.conf. Just to be safe
Last edited by Gluffs (2008-07-12 23:46:09)

Similar Messages

Solving Kernel/Xorg problems

Hi all,
I've been using linux for several years now, and I like it a lot, but it's still not clear in my mind what to do when I run into kernel or Xorg problems.
When I run into a problem with a userland application, it's usually quite simple to identify the culprit or at least the apparent culprit, find the relevant bugzilla, file a bug and try to help the people in charge to fix the problem.
In contrast, the world of low-level stuff is a lot more intimidating. For example, I have had several display and supsend/hibernate problems with my laptop for more than one year now, but I still have no idea what to do about them. What can/ should I do about kernel/Xorg problems?

I didn't want this thread to be about my specific problems, but here goes:
- Suspend fails about half of the time, the screen blanks (with a cursor blinking) and the computer just hangs. It is completely dead (REISUB doesn't work)
- Hibernate doesn't work, when I turn the computer on, it checks the filesystems and boots normally
- About 10% of the time, the login manager (currently kdm, but I had the same problem with gdm) shows with a very low resolution. Restarting xorg usually fixes the problem.
I probably have a few more that I'm forgetting at the moment.

Xorg problem? toshiba satellite L755D, radeon

Uhg ... so I've been searching trying figure this out past two days no luck.
I'm not 100% sure what I did before. I did do a full update this week and now I can not startx.
Hopefully someone can help me I think I'm missing something.
Attached log file.... little long I guess I'll just give it to you.
[ 2163.474]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 2163.478] X Protocol Version 11, Revision 0
[ 2163.479] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 2163.480] Current Operating System: Linux nx01 3.6.9-1-ARCH #1 SMP PREEMPT Tue Dec 4 08:04:10 CET 2012 x86_64
[ 2163.480] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=b71f26c3-6d31-41f5-be6d-abbf10644cd0 ro quiet
[ 2163.483] Build Date: 08 November 2012 07:09:29PM
[ 2163.484]
[ 2163.485] Current version of pixman: 0.28.0
[ 2163.487] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2163.487] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2163.491] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 6 19:15:50 2012
[ 2163.493] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2163.493] (==) No Layout section. Using the first Screen section.
[ 2163.493] (==) No screen section available. Using defaults.
[ 2163.493] (**) |-->Screen "Default Screen Section" (0)
[ 2163.493] (**) | |-->Monitor "<default monitor>"
[ 2163.493] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2163.493] (==) Automatically adding devices
[ 2163.493] (==) Automatically enabling devices
[ 2163.493] (==) Automatically adding GPU devices
[ 2163.493] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2163.493] Entry deleted from font path.
[ 2163.493] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2163.493] Entry deleted from font path.
[ 2163.493] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2163.493] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2163.493] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2163.493] (II) Loader magic: 0x7fcc40
[ 2163.493] (II) Module ABI versions:
[ 2163.493] X.Org ANSI C Emulation: 0.4
[ 2163.493] X.Org Video Driver: 13.1
[ 2163.493] X.Org XInput driver : 18.0
[ 2163.493] X.Org Server Extension : 7.0
[ 2163.493] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 2163.493] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 2163.495] (--) PCI:*(0:0:1:0) 1002:9641:1179:fc52 rev 0, Mem @ 0xd0000000/268435456, 0xf0300000/262144, I/O @ 0x00005000/256
[ 2163.495] (--) PCI: (0:1:0:0) 1002:6760:1179:fc52 rev 0, Mem @ 0xe0000000/268435456, 0xf0200000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 2163.495] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2163.496] Initializing built-in extension Generic Event Extension
[ 2163.497] Initializing built-in extension SHAPE
[ 2163.498] Initializing built-in extension MIT-SHM
[ 2163.499] Initializing built-in extension XInputExtension
[ 2163.500] Initializing built-in extension XTEST
[ 2163.501] Initializing built-in extension BIG-REQUESTS
[ 2163.502] Initializing built-in extension SYNC
[ 2163.503] Initializing built-in extension XKEYBOARD
[ 2163.504] Initializing built-in extension XC-MISC
[ 2163.505] Initializing built-in extension SECURITY
[ 2163.506] Initializing built-in extension XINERAMA
[ 2163.507] Initializing built-in extension XFIXES
[ 2163.508] Initializing built-in extension RENDER
[ 2163.509] Initializing built-in extension RANDR
[ 2163.510] Initializing built-in extension COMPOSITE
[ 2163.511] Initializing built-in extension DAMAGE
[ 2163.512] Initializing built-in extension MIT-SCREEN-SAVER
[ 2163.513] Initializing built-in extension DOUBLE-BUFFER
[ 2163.514] Initializing built-in extension RECORD
[ 2163.515] Initializing built-in extension DPMS
[ 2163.516] Initializing built-in extension X-Resource
[ 2163.516] Initializing built-in extension XVideo
[ 2163.517] Initializing built-in extension XVideo-MotionCompensation
[ 2163.518] Initializing built-in extension XFree86-VidModeExtension
[ 2163.519] Initializing built-in extension XFree86-DGA
[ 2163.520] Initializing built-in extension XFree86-DRI
[ 2163.520] Initializing built-in extension DRI2
[ 2163.520] (II) LoadModule: "glx"
[ 2163.521] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2163.521] (II) Module glx: vendor="X.Org Foundation"
[ 2163.521] compiled for 1.13.0, module version = 1.0.0
[ 2163.521] ABI class: X.Org Server Extension, version 7.0
[ 2163.521] (==) AIGLX enabled
[ 2163.522] Loading extension GLX
[ 2163.522] (==) Matched ati as autoconfigured driver 0
[ 2163.522] (==) Matched ati as autoconfigured driver 1
[ 2163.522] (==) Matched ati as autoconfigured driver 2
[ 2163.522] (==) Matched vesa as autoconfigured driver 3
[ 2163.522] (==) Matched modesetting as autoconfigured driver 4
[ 2163.522] (==) Matched fbdev as autoconfigured driver 5
[ 2163.522] (==) Assigned the driver to the xf86ConfigLayout
[ 2163.522] (II) LoadModule: "ati"
[ 2163.522] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 2163.522] (II) Module ati: vendor="X.Org Foundation"
[ 2163.522] compiled for 1.13.0, module version = 7.0.0
[ 2163.522] Module class: X.Org Video Driver
[ 2163.522] ABI class: X.Org Video Driver, version 13.0
[ 2163.522] (II) LoadModule: "radeon"
[ 2163.522] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 2163.522] (II) Module radeon: vendor="X.Org Foundation"
[ 2163.522] compiled for 1.13.0, module version = 7.0.0
[ 2163.522] Module class: X.Org Video Driver
[ 2163.522] ABI class: X.Org Video Driver, version 13.0
[ 2163.522] (II) LoadModule: "vesa"
[ 2163.522] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 2163.522] (II) Module vesa: vendor="X.Org Foundation"
[ 2163.522] compiled for 1.13.0, module version = 2.3.2
[ 2163.522] Module class: X.Org Video Driver
[ 2163.522] ABI class: X.Org Video Driver, version 13.0
[ 2163.522] (II) LoadModule: "modesetting"
[ 2163.522] (WW) Warning, couldn't open module modesetting
[ 2163.522] (II) UnloadModule: "modesetting"
[ 2163.522] (II) Unloading modesetting
[ 2163.522] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2163.522] (II) LoadModule: "fbdev"
[ 2163.522] (WW) Warning, couldn't open module fbdev
[ 2163.522] (II) UnloadModule: "fbdev"
[ 2163.522] (II) Unloading fbdev
[ 2163.522] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2163.522] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE
[ 2163.526] (II) VESA: driver for VESA chipsets: vesa
[ 2163.526] (++) using VT number 1
[ 2163.526] (II) [KMS] Kernel modesetting enabled.
[ 2163.526] (II) [KMS] Kernel modesetting enabled.
[ 2163.526] (WW) Falling back to old probe method for vesa
[ 2163.526] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2163.526] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 2163.526] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2163.526] (==) RADEON(0): Default visual is TrueColor
[ 2163.526] (==) RADEON(0): RGB weight 888
[ 2163.526] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 2163.526] (--) RADEON(0): Chipset: "SUMO" (ChipID = 0x9641)
[ 2163.526] (II) Loading sub module "dri2"
[ 2163.526] (II) LoadModule: "dri2"
[ 2163.526] (II) Module "dri2" already built-in
[ 2163.526] (II) Loading sub module "exa"
[ 2163.526] (II) LoadModule: "exa"
[ 2163.526] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 2163.526] (II) Module exa: vendor="X.Org Foundation"
[ 2163.526] compiled for 1.13.0, module version = 2.6.0
[ 2163.526] ABI class: X.Org Video Driver, version 13.1
[ 2163.526] (II) RADEON(0): KMS Color Tiling: enabled
[ 2163.526] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 2163.526] (II) RADEON(0): KMS Pageflipping: enabled
[ 2163.526] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 2163.664] (II) RADEON(0): Output VGA-0 has no monitor section
[ 2163.704] (II) RADEON(0): Output LVDS has no monitor section
[ 2163.706] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 2163.844] (II) RADEON(0): EDID for output VGA-0
[ 2163.884] (II) RADEON(0): EDID for output LVDS
[ 2163.884] (II) RADEON(0): Manufacturer: SEC Model: 5541 Serial#: 0
[ 2163.884] (II) RADEON(0): Year: 2009 Week: 0
[ 2163.884] (II) RADEON(0): EDID Version: 1.3
[ 2163.884] (II) RADEON(0): Digital Display Input
[ 2163.884] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 2163.884] (II) RADEON(0): Gamma: 2.20
[ 2163.884] (II) RADEON(0): No DPMS capabilities specified
[ 2163.884] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2163.884] (II) RADEON(0): First detailed timing is preferred mode
[ 2163.884] (II) RADEON(0): redX: 0.620 redY: 0.355 greenX: 0.300 greenY: 0.580
[ 2163.884] (II) RADEON(0): blueX: 0.150 blueY: 0.090 whiteX: 0.313 whiteY: 0.329
[ 2163.884] (II) RADEON(0): Manufacturer's mask: 0
[ 2163.884] (II) RADEON(0): Supported detailed timing:
[ 2163.884] (II) RADEON(0): clock: 72.3 MHz Image Size: 344 x 193 mm
[ 2163.884] (II) RADEON(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 2163.884] (II) RADEON(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0
[ 2163.884] (II) RADEON(0): Unknown vendor-specific block f
[ 2163.884] (II) RADEON(0): SAMSUNG
[ 2163.884] (II) RADEON(0): 156AT05-T02
[ 2163.884] (II) RADEON(0): EDID (in hex):
[ 2163.884] (II) RADEON(0): 00ffffffffffff004ca3415500000000
[ 2163.884] (II) RADEON(0): 00130103802213780ace859e5b4c9426
[ 2163.884] (II) RADEON(0): 17505400000001010101010101010101
[ 2163.884] (II) RADEON(0): 010101010101411c56a0500016303020
[ 2163.884] (II) RADEON(0): 250058c1100000190000000f00000000
[ 2163.884] (II) RADEON(0): 00000000001eb4027400000000fe0053
[ 2163.884] (II) RADEON(0): 414d53554e470a2020202020000000fe
[ 2163.884] (II) RADEON(0): 00313536415430352d5430320a2000b8
[ 2163.884] (II) RADEON(0): Printing probed modes for output LVDS
[ 2163.884] (II) RADEON(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP)
[ 2163.884] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 2163.884] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 2163.884] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 2163.884] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 2163.884] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 2163.884] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 2163.884] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 2163.886] (II) RADEON(0): EDID for output HDMI-0
[ 2163.886] (II) RADEON(0): Output VGA-0 disconnected
[ 2163.886] (II) RADEON(0): Output LVDS connected
[ 2163.886] (II) RADEON(0): Output HDMI-0 disconnected
[ 2163.886] (II) RADEON(0): Using exact sizes for initial modes
[ 2163.886] (II) RADEON(0): Output LVDS using initial mode 1366x768
[ 2163.886] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2163.886] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:fba0000
[ 2163.886] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 2163.886] (==) RADEON(0): DPI set to (96, 96)
[ 2163.886] (II) Loading sub module "fb"
[ 2163.886] (II) LoadModule: "fb"
[ 2163.886] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2163.886] (II) Module fb: vendor="X.Org Foundation"
[ 2163.886] compiled for 1.13.0, module version = 1.0.0
[ 2163.886] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2163.886] (II) Loading sub module "ramdac"
[ 2163.886] (II) LoadModule: "ramdac"
[ 2163.886] (II) Module "ramdac" already built-in
[ 2163.886] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32
[ 2163.886] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2163.886] (==) RADEON(G0): Default visual is TrueColor
[ 2163.886] (==) RADEON(G0): RGB weight 888
[ 2163.526] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 2163.526] (--) RADEON(0): Chipset: "SUMO" (ChipID = 0x9641)
[ 2163.526] (II) Loading sub module "dri2"
[ 2163.526] (II) LoadModule: "dri2"
[ 2163.526] (II) Module "dri2" already built-in
[ 2163.526] (II) Loading sub module "exa"
[ 2163.526] (II) LoadModule: "exa"
[ 2163.526] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 2163.526] (II) Module exa: vendor="X.Org Foundation"
[ 2163.526] compiled for 1.13.0, module version = 2.6.0
[ 2163.526] ABI class: X.Org Video Driver, version 13.1
[ 2163.526] (II) RADEON(0): KMS Color Tiling: enabled
[ 2163.526] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 2163.526] (II) RADEON(0): KMS Pageflipping: enabled
[ 2163.526] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 2163.664] (II) RADEON(0): Output VGA-0 has no monitor section
[ 2163.704] (II) RADEON(0): Output LVDS has no monitor section
[ 2163.706] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 2163.844] (II) RADEON(0): EDID for output VGA-0
[ 2163.884] (II) RADEON(0): EDID for output LVDS
[ 2163.884] (II) RADEON(0): Manufacturer: SEC Model: 5541 Serial#: 0
[ 2163.884] (II) RADEON(0): Year: 2009 Week: 0
[ 2163.884] (II) RADEON(0): EDID Version: 1.3
[ 2163.884] (II) RADEON(0): Digital Display Input
[ 2163.884] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 2163.884] (II) RADEON(0): Gamma: 2.20
[ 2163.884] (II) RADEON(0): No DPMS capabilities specified
[ 2163.884] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2163.884] (II) RADEON(0): First detailed timing is preferred mode
[ 2163.884] (II) RADEON(0): redX: 0.620 redY: 0.355 greenX: 0.300 greenY: 0.580
[ 2163.884] (II) RADEON(0): blueX: 0.150 blueY: 0.090 whiteX: 0.313 whiteY: 0.329
[ 2163.884] (II) RADEON(0): Manufacturer's mask: 0
[ 2163.884] (II) RADEON(0): Supported detailed timing:
[ 2163.884] (II) RADEON(0): clock: 72.3 MHz Image Size: 344 x 193 mm
[ 2163.884] (II) RADEON(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 2163.884] (II) RADEON(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0
[ 2163.884] (II) RADEON(0): Unknown vendor-specific block f
[ 2163.884] (II) RADEON(0): SAMSUNG
[ 2163.884] (II) RADEON(0): 156AT05-T02
[ 2163.884] (II) RADEON(0): EDID (in hex):
[ 2163.884] (II) RADEON(0): 00ffffffffffff004ca3415500000000
[ 2163.884] (II) RADEON(0): 00130103802213780ace859e5b4c9426
[ 2163.884] (II) RADEON(0): 17505400000001010101010101010101
[ 2163.884] (II) RADEON(0): 010101010101411c56a0500016303020
[ 2163.884] (II) RADEON(0): 250058c1100000190000000f00000000
[ 2163.884] (II) RADEON(0): 00000000001eb4027400000000fe0053
[ 2163.884] (II) RADEON(0): 414d53554e470a2020202020000000fe
[ 2163.884] (II) RADEON(0): 00313536415430352d5430320a2000b8
[ 2163.884] (II) RADEON(0): Printing probed modes for output LVDS
[ 2163.884] (II) RADEON(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP)
[ 2163.884] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 2163.884] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 2163.884] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 2163.884] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 2163.884] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 2163.884] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 2163.884] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 2163.886] (II) RADEON(0): EDID for output HDMI-0
[ 2163.886] (II) RADEON(0): Output VGA-0 disconnected
[ 2163.886] (II) RADEON(0): Output LVDS connected
[ 2163.886] (II) RADEON(0): Output HDMI-0 disconnected
[ 2163.886] (II) RADEON(0): Using exact sizes for initial modes
[ 2163.886] (II) RADEON(0): Output LVDS using initial mode 1366x768
[ 2163.886] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2163.886] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:fba0000
[ 2163.886] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 2163.886] (==) RADEON(0): DPI set to (96, 96)
[ 2163.886] (II) Loading sub module "fb"
[ 2163.886] (II) LoadModule: "fb"
[ 2163.886] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2163.886] (II) Module fb: vendor="X.Org Foundation"
[ 2163.886] compiled for 1.13.0, module version = 1.0.0
[ 2163.886] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2163.886] (II) Loading sub module "ramdac"
[ 2163.886] (II) LoadModule: "ramdac"
[ 2163.886] (II) Module "ramdac" already built-in
[ 2163.886] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32
[ 2163.886] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2163.886] (==) RADEON(G0): Default visual is TrueColor
[ 2163.886] (==) RADEON(G0): RGB weight 888
[ 2163.886] (II) RADEON(G0): Using 8 bits per RGB (8 bit DAC)
[ 2163.886] (--) RADEON(G0): Chipset: "CAICOS" (ChipID = 0x6760)
[ 2163.887] (II) Loading sub module "dri2"
[ 2163.887] (II) LoadModule: "dri2"
[ 2163.887] (II) Module "dri2" already built-in
[ 2163.887] (II) Loading sub module "exa"
[ 2163.887] (II) LoadModule: "exa"
[ 2163.887] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 2163.887] (II) Module exa: vendor="X.Org Foundation"
[ 2163.887] compiled for 1.13.0, module version = 2.6.0
[ 2163.887] ABI class: X.Org Video Driver, version 13.1
[ 2163.887] (II) RADEON(G0): KMS Color Tiling: enabled
[ 2163.887] (II) RADEON(G0): KMS Color Tiling 2D: enabled
[ 2163.887] (II) RADEON(G0): KMS Pageflipping: enabled
[ 2163.887] (II) RADEON(G0): SwapBuffers wait for vsync: enabled
[ 2163.887] (WW) RADEON(G0): No outputs definitely connected, trying again...
[ 2163.887] (WW) RADEON(G0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 2163.887] (II) RADEON(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2163.887] (EE)
[ 2163.887] (EE) Backtrace:
[ 2163.887] (EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x58a326]
[ 2163.887] (EE) 1: /usr/bin/X (0x400000+0x18e179) [0x58e179]
[ 2163.887] (EE) 2: /usr/lib/libpthread.so.0 (0x7f2fe17d8000+0xf1a0) [0x7f2fe17e71a0]
[ 2163.887] (EE) 3: /usr/bin/X (xf86SetScrnInfoModes+0x275) [0x4acc35]
[ 2163.887] (EE) 4: /usr/bin/X (xf86InitialConfiguration+0x15b8) [0x4b05e8]
[ 2163.887] (EE) 5: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x7f2fdf092000+0x46483) [0x7f2fdf0d8483]
[ 2163.887] (EE) 6: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x7f2fdf092000+0x420f4) [0x7f2fdf0d40f4]
[ 2163.887] (EE) 7: /usr/bin/X (InitOutput+0xb3e) [0x479fde]
[ 2163.887] (EE) 8: /usr/bin/X (0x400000+0x26786) [0x426786]
[ 2163.887] (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f2fe0466725]
[ 2163.887] (EE) 10: /usr/bin/X (0x400000+0x26cad) [0x426cad]
[ 2163.887] (EE)
[ 2163.887] (EE) Segmentation fault at address 0x0
[ 2163.887]
Fatal server error:
[ 2163.887] Caught signal 11 (Segmentation fault). Server aborting
[ 2163.887]
[ 2163.887] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2163.887] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2163.887] (EE)
[ 2163.902] Server terminated with error (1). Closing log file.

Maybe try the solution in post #6, here? Looks similar to your problem.

Xorg Problem - Failed to initialize the NVIDIA graphics device!

Hello.
I've encountered a problem while installing my Xorg server, which I'd like to use with KDE.
Here's the track of my xorg installation:
# sudo pacman -Syu
# sudo pacman -S xorg
(my graphic card is vVidia GeForce 8600 GT)
# sudo pacman -S nvidia-96xx nvidia-96xx-utils
# sudo nvidia-xconfig
(that's where I wanted to check if I did everything right)
#sudo startx
Xorg started loading and after a few secs it printed such output:
NVIDIA: could not open the devie file /dev/nvidia0 (Input/output error).
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:4:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usabe configuration.
Fatal server error:
no screens found
giving up.
xinit: Connection refused (errno 111): unable to connect to X server
xinit: No such process (errno3): Server error.
What should I do?

matnik wrote:(my graphic card is vVidia GeForce 8600 GT)
# sudo pacman -S nvidia-96xx nvidia-96xx-utils
# sudo nvidia-xconfig
1. wrong driver. the 96xx driver is for horrible old hardware, like the gf4. Install 'nvidia' and 'nvidia-utils' instead.
2. don't use nvidia-xconfig, it's not needed.
3. reboot after installing the driver if you havn't disabled kms already.

Xorg problem

Hi, I just installed Arch (wauw it boots fast ) and everything is working (even my wireless with Ndiswrapper) except my Xorg. I dit:
pacman -S xorg
xorgconfig
pacman -S hwd
hwd -x
mv xorg.conf.hwd xorg.conf (in /etc/X11)
and when I try Xorg-configure or startx I always have some errors.
First I saw after a startx:
xf86OpenConsole Cannot open /dev/tty0 (permission denied)
But when I did an udev upgrade this was fixed. But when I do startx now I see:
Cannot move old log file ("/var/log/Xorg.0.log to /var/log/Xorg.0.log.old")

http://bbs.archlinux.org/viewtopic.php? … highlight=
Thread already exists. This has been solved with xorg-server 1.0.1-6 - wait for a bit and then re-update your system and this problem will go away.

Thanks for your HELP! Xorg problem

I've installed the base system successfully, and used pacman to get xorg packages.
Then I ran xorgconfig.
All seems OK, but I cannot startx.
If I run xorgcfg, there's just a X-like mouse pointer and black background.
/etc/X11/xorg.conf shows:
# Device configured by xorgconfig:
Section "Device"
Identifier "My Video Card"
Driver "vga"
# unsupported card
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
What's the problem?
My video card is Intel integrated.
Did I made some mistake when configuring, or I need a driver?

The wiki is absolutely the best resource for problems like these: http://wiki.archlinux.org/index.php/Beg … figuring_X
You probably need "i810" or "intel" driver.

[SOLVED] Xorg problem: fglrx, startx & Xorg -configure

Hi,
On a HP 8510p notebook (Core 2 Duo, AMD/ATI Mobility Radeon HD 2600)
I have just installed Arch Linux, did a system update (pacman -Syu), installed the catalyst package, which depends on xorg-server, among others.
When I do a "Xorg -configure" it fails with a "Fatal server error: Caught signal 11. Server aborting". As I see in /var/log/Xorg.0.log, I don't get an (EE)/error. I just can' understand why the X server fails.
/var/log/Xorg.0.log - with no /etc/X11/xorg.conf file
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux archlinux 2.6.23-ARCH #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 24 21:09:40 2007
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 103c,30c5 rev 0c class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2a01 card 0000,0000 rev 0c class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 8086,2a04 card 103c,30c5 rev 0c class 07,80,00 hdr 80
(II) PCI: 00:03:2: chip 8086,2a06 card 103c,30c5 rev 0c class 01,01,85 hdr 00
(II) PCI: 00:03:3: chip 8086,2a07 card 103c,30c5 rev 0c class 07,00,02 hdr 00
(II) PCI: 00:19:0: chip 8086,1049 card 103c,30c5 rev 03 class 02,00,00 hdr 00
(II) PCI: 00:1a:0: chip 8086,2834 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 103c,30c5 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2811 card 103c,30c5 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 103c,30c5 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 103c,30c5 rev 03 class 01,06,01 hdr 00
(II) PCI: 01:00:0: chip 1002,9581 card 103c,30c5 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,aa08 card 103c,30c5 rev 00 class 04,03,00 hdr 80
(II) PCI: 02:06:0: chip 1180,0476 card 6000,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:1: chip 1180,0476 card 6800,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:2: chip 1180,0832 card 103c,30c5 rev 03 class 0c,00,10 hdr 80
(II) PCI: 02:06:3: chip 1180,0822 card 103c,30c5 rev 20 class 08,05,00 hdr 80
(II) PCI: 02:06:4: chip 1180,0843 card 103c,30c5 rev 10 class 08,80,00 hdr 80
(II) PCI: 10:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,40), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe4400000 - 0xe44fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:28:0), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 16: bridge is at (0:28:1), (0,16,16), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe40fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 40: bridge is at (0:28:4), (0,40,40), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 40 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
[4] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[5] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[6] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[7] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 40 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,7), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe4100000 - 0xe43fffff (0x300000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x80000000 - 0x87ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:6:0), (2,3,3), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (2:6:1), (2,4,7), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[1] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0x84000000 - 0x87ffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x9581) rev 0, Mem @ 0xd0000000/28, 0xe4400000/16, I/O @ 0x4000/8
List of video drivers:
fglrx
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
Module class: X.Org Video Driver
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.43.2
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.433
(II) ATI Proprietary Linux Driver Build Date: Nov 9 2007 21:19:16
Backtrace:
0: Xorg(xf86SigHandler+0x7e) [0x80d9d5e]
1: [0xb7f03420]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x13b) [0xb792a5ab]
3: Xorg(DoConfigure+0x211) [0x80dc9f1]
4: Xorg(InitOutput+0x61a) [0x80a7a9a]
5: Xorg(main+0x296) [0x8073b66]
6: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7cd5390]
7: Xorg(FontFileCompleteXLFD+0x201) [0x80730d1]
Fatal server error:
Caught signal 11. Server aborting
Obs: When I do a "startx", with a custom and minimalist xorg.conf, my notebook stops to respond (doesn't function Ctrl-Alt-Backspace, Alt-F2,3..., Ctrl-C... noting) and the screen is all black.
But first, I think it should work the "Xorg -configure"
Last edited by Claudiu2EE (2007-11-30 18:45:20)

Hi!
I'll post some more information...
When I do "startx", like I said, it seems that X is starting, the display changes from grey to black and dark-grey again... but then I can't do nothing to exit, but to press the power button.
So, as no "hwd -x" (uses lshwd -> Segmentation fault) or "Xorg -configure" (Caught signal 11. Server aborting) works, I wrote a xorg.conf by 0, googleing around and inspiring me from the Arch Wiki.
I have no ~/.xinitrc (I have tried with one who had an exec xterm, but no success)
Package information:
xorg-server 1.4-5
xorg-xinit 1.0.7-1
xorg-twm 1.0.1-2
xterm 229-2
catalyst 7.11-1
/etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi/:unscaled"
#FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
#FontPath "/usr/share/fonts/75dpi"
# path to defoma fonts
#FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "AIGLX" "off"
EndSection
Section "Module"
#Load "dri" # direct rendering infrastructure which makes opengl go fast
Load "glx" # glx and glcore implement opengl
#Load "GLcore"
Load "extmod" # collection of X protocol extentions that shouldn't even be loadable
#Load "int10" # vesa bios interface for card setup stuff
#Load "vbe"
#Load "i2c" # serial bus over which you speak the ddc protocol to get info from the monitor
Load "ddc"
Load "freetype" # load freetype fonts and type 1 fonts
Load "type1"
Load "dbe"
EndSection
Section "Extensions"
Option "Composite" "off"
EndSection
Section "InputDevice"
Identifier "Generic Notebook Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Generic USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "SHMConfig" "on"
EndSection
Section "Device"
Identifier "ATI Mobility Radeon HD 2600"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Notebook Monitor"
ModelName "AUO LCD MONITOR"
VendorName "AUO"
DisplaySize 331 207
VertRefresh 43-60
HorizSync 30-62
Option "DPMS"
# UseModes "Widescreen Modes"
EndSection
#Section "Modes"
# Identifier "Widescreen Modes"
# Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828
#EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Mobility Radeon HD 2600"
Monitor "Generic Notebook Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
InputDevice "Generic Notebook Keyboard" "CoreKeyboard"
#InputDevice "Generic USB Mouse"
InputDevice "Synaptics Touchpad" "CorePointer"
EndSection
Section "DRI"
Mode 0666
EndSection
/var/log/Xorg.0.log
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux archlinux 2.6.23-ARCH #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 25 13:34:07 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Notebook Monitor"
(**) | |-->Device "AMD Radeon 2600HD"
(**) |-->Input Device "Generic Notebook Keyboard"
(**) |-->Input Device "Synaptics Touchpad"
(**) Option "AllowMouseOpenFail" "on"
(**) Option "AIGLX" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(II) No default mouse found, adding one
(**) |-->Input Device "<default pointer>"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 103c,30c5 rev 0c class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2a01 card 0000,0000 rev 0c class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 8086,2a04 card 103c,30c5 rev 0c class 07,80,00 hdr 80
(II) PCI: 00:03:2: chip 8086,2a06 card 103c,30c5 rev 0c class 01,01,85 hdr 00
(II) PCI: 00:03:3: chip 8086,2a07 card 103c,30c5 rev 0c class 07,00,02 hdr 00
(II) PCI: 00:19:0: chip 8086,1049 card 103c,30c5 rev 03 class 02,00,00 hdr 00
(II) PCI: 00:1a:0: chip 8086,2834 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 103c,30c5 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2811 card 103c,30c5 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 103c,30c5 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 103c,30c5 rev 03 class 01,06,01 hdr 00
(II) PCI: 01:00:0: chip 1002,9581 card 103c,30c5 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,aa08 card 103c,30c5 rev 00 class 04,03,00 hdr 80
(II) PCI: 02:06:0: chip 1180,0476 card 6000,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:1: chip 1180,0476 card 6800,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:2: chip 1180,0832 card 103c,30c5 rev 03 class 0c,00,10 hdr 80
(II) PCI: 02:06:3: chip 1180,0822 card 103c,30c5 rev 20 class 08,05,00 hdr 80
(II) PCI: 02:06:4: chip 1180,0843 card 103c,30c5 rev 10 class 08,80,00 hdr 80
(II) PCI: 10:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,40), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe4400000 - 0xe44fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:28:0), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 16: bridge is at (0:28:1), (0,16,16), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe40fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 40: bridge is at (0:28:4), (0,40,40), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 40 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
[4] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[5] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[6] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[7] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 40 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,7), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe4100000 - 0xe43fffff (0x300000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x80000000 - 0x87ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:6:0), (2,3,3), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (2:6:1), (2,4,7), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[1] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0x84000000 - 0x87ffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x9581) rev 0, Mem @ 0xd0000000/28, 0xe4400000/16, I/O @ 0x4000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.43.2
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.433
(II) ATI Proprietary Linux Driver Build Date: Nov 9 2007 21:19:16
(--) Chipset Supported AMD Graphics Processor (0x9581) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x8206b38
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[24] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[25] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[26] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[27] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[28] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[29] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[30] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[34] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[35] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[36] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[37] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[38] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[39] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[40] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[41] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[42] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[43] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[44] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[45] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[46] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
[47] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[48] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2600" (Chipset = 0x9581)
(--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30c5)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xe4400000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.56
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M76
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: AUO Model: 2074 Serial#: 0
(II) fglrx(0): Year: 2006 Week: 1
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1417 h_border: 0
(II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 815 v_border: 0
(II) fglrx(0): AUO
(II) fglrx(0): B154EW02 V0
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0006af742000000000
(II) fglrx(0): 01100103802115780a1cf59758508e27
(II) fglrx(0): 27505400000001010101010101010101
(II) fglrx(0): 010101010101121b008950200f303020
(II) fglrx(0): 36004bcf100000180000000f00000000
(II) fglrx(0): 00000000000000000020000000fe0041
(II) fglrx(0): 554f0a202020202020202020000000fe
(II) fglrx(0): 004231353445573032205630200a007f
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 12 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x800 (pitch 0)
(**) fglrx(0): *Mode "1280x800": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0 69.30 1280 1328 1360 1417 800 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1280x720": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1328 1360 1417 720 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1024x768": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1328 1360 1417 768 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "800x600": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1328 1360 1417 600 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "720x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 69.30 720 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x432": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"x60.0 69.30 640 1328 1360 1417 432 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x400": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 69.30 640 1328 1360 1417 400 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "512x384": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 69.30 512 1328 1360 1417 384 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "400x300": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0 69.30 400 1328 1360 1417 300 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x240": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0 69.30 320 1328 1360 1417 240 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x200": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0 69.30 320 1328 1360 1417 200 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Display dimensions: (331, 207) mm
(**) fglrx(0): DPI set to (98, 98)
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0 69.30 1280 1328 1360 1417 800 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1280x720": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1328 1360 1417 720 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1024x768": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1328 1360 1417 768 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "800x600": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1328 1360 1417 600 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "720x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 69.30 720 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x432": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"x60.0 69.30 640 1328 1360 1417 432 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x400": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 69.30 640 1328 1360 1417 400 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "512x384": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 69.30 512 1328 1360 1417 384 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "400x300": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0 69.30 400 1328 1360 1417 300 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x240": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0 69.30 320 1328 1360 1417 240 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x200": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0 69.30 320 1328 1360 1417 200 803 809 815 +hsync +vsync (48.9 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): HPV inactive
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 256 MB
(II) fglrx(0): [pcie] 258048 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe4400000 - 0xe440ffff (0x10000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[7] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[8] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[9] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[10] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[11] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[12] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[13] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[14] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[15] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[16] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[17] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[18] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[19] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[20] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[24] 0 0 0x00004000 - 0x000040ff (0x100) IX[b]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[26] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[27] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[28] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[29] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[30] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[31] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[32] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[33] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[34] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[35] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[36] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[37] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[38] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[39] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[40] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[41] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[42] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[43] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[44] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[45] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[46] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[47] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[48] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[49] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
[50] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[51] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(WW) fglrx(0): could not detect X server version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [drm] installed DRM signal handler
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.43.2
(II) fglrx(0): Date: Nov 9 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.23-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00005000
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01000400
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3277)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2477
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 10
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
[atiddx] ASYNCIO init succeed!
Receive enable interrupt ret message
...irqEnableMask: 60000001
...dwIRQEnableId: 00000006
Receive enable interrupt ret message
...irqEnableMask: 00000040
...dwIRQEnableId: 00000007
Receive enable interrupt ret message
...irqEnableMask: ff00002c
...dwIRQEnableId: 00000008
Receive enable interrupt ret message
...irqEnableMask: ff00002d
...dwIRQEnableId: 00000009
Receive enable interrupt ret message
...irqEnableMask: 20000400
...dwIRQEnableId: 0000000a
(II) fglrx(0): Finished Initialize PPLIB!
(II) fglrx(0): Enable the clock gating
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
Please, assist me in this problem.
Thank you.

[SOLVED] Xorg problems.. :/

I've got nouveau-dri, libgl. All the nvidia modules are unloaded and nouveau ones are loaded.
xorg-server 1.8.1.902-1
nouveau-dri 7.8.2-1
libgl 7.8.2-1
Also I've got these xf86-input- pkgs:
local/xf86-input-evdev 2.4.0-1 (xorg-input-drivers)
X.org evdev input driver
local/xf86-input-keyboard 1.4.0-2 (xorg-input-drivers)
X.Org keyboard input driver
local/xf86-input-mouse 1.5.0-2 (xorg-input-drivers)
X.org mouse input driver
local/xf86-input-vmmouse 12.6.7-1 (xorg-input-drivers)
X.org VMWare Mouse input driver
When I startx, mpd keeps on playing, but mouse and keyboard is not working.
lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000] (rev c1)
Also the xorg.conf device section thing's in place.
Last edited by sie (2010-07-02 06:15:05)

sie wrote:
Why is X -configure failing? It outputted: http://dpaste.com/213349/
Btw I uninstalled vesa, cause I thought it might be messing something up, but nothing's still working.
remove nouveau, install vesa, have xorg configure vesa, and then simply replace the driver
btw. you should have KMS enabled.

Black screen instead of TTYs after Xorg once started and leaved

Hi,
I've installed Arch on my laptop and experience following issue... I log in after boot and run "startx", then openbox starts properly. This is fine, but when I leave X, I can't see anything (TTY expected). I can switch to another TTY, login as root and type "reboot" or type "killall X", then log in as regular user and type "startx" to get openbox again. So there are TTYs obviously but I can't see anything but black screen.
By leaving X (above) I mean...
- typing "sudo killal X" in xterm
- using openbox "Log Out" menu option
- switching to another TTY by hitting Alt+Fn
All of these lead to the same issue.
I assume it's not Xorg problem, but I may be wrong of course. Is that driver related? I have Nvidia card and use proprietary drivers installed via pacman. Can anybody give me an advice where to look? Thanks a lot. I also attach (maybe relevant) outputs. If there is anything else needed to know please tell me and I'll post it.
$ lspci
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation Device 075e (rev a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:09.0 SATA controller: nVidia Corporation Device 0ad5 (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:12.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:13.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:14.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:15.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h [Turion X2, Athlon X2, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Link Control
02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 9100M G] (rev a2)
03:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1)
06:00.0 Network controller: RaLink RT2860
07:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller
07:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
07:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
07:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
$ pacman -Qs nvidia
local/libvdpau 0.4-1
Nvidia VDPAU library
local/nvidia 256.35-1
NVIDIA drivers for kernel26.
local/nvidia-utils 256.35-4
NVIDIA drivers utilities and libraries.
$ cat /var/log/Xorg.0.log.old
[ 156.095]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 156.097]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 156.098] X Protocol Version 11, Revision 0
[ 156.098] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 156.098] Current Operating System: Linux DrZoidberg 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 00:07:49 CEST 2010 x86_64
[ 156.098] Kernel command line: root=/dev/sda5 ro
[ 156.098] Build Date: 21 June 2010 12:01:49PM
[ 156.099]
[ 156.099] Current version of pixman: 0.18.2
[ 156.099] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 156.099] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 156.101] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 4 15:57:39 2010
[ 156.101] (==) Using config file: "/etc/X11/xorg.conf"
[ 156.101] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 156.102] (==) ServerLayout "Layout0"
[ 156.102] (**) |-->Screen "Screen0" (0)
[ 156.102] (**) | |-->Monitor "Monitor0"
[ 156.102] (**) | |-->Device "Device0"
[ 156.102] (**) |-->Input Device "Keyboard0"
[ 156.102] (**) |-->Input Device "Mouse0"
[ 156.102] (==) Automatically adding devices
[ 156.102] (==) Automatically enabling devices
[ 156.102] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 156.102] Entry deleted from font path.
[ 156.102] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 156.102] Entry deleted from font path.
[ 156.102] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 156.102] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 156.102] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 156.102] (WW) Disabling Keyboard0
[ 156.102] (WW) Disabling Mouse0
[ 156.102] (II) Loader magic: 0x7ce880
[ 156.102] (II) Module ABI versions:
[ 156.102] X.Org ANSI C Emulation: 0.4
[ 156.102] X.Org Video Driver: 7.0
[ 156.102] X.Org XInput driver : 9.0
[ 156.102] X.Org Server Extension : 3.0
[ 156.110] (--) PCI: (0:0:1:3) 10de:0753:1462:6710 nVidia Corporation MCP78S [GeForce 8200] Co-Processor rev 162, Mem @ 0xf8e80000/524288
[ 156.110] (--) PCI:*(0:2:0:0) 10de:0844:1462:6710 nVidia Corporation C77 [GeForce 9100M G] rev 162, Mem @ 0xf9000000/16777216, 0xc8000000/134217728, 0xc6000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072
[ 156.110] (--) PCI: (0:3:0:0) 10de:06e9:1462:6710 nVidia Corporation G98 [GeForce 9300M GS] rev 161, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
[ 156.110] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 156.110] (II) LoadModule: "extmod"
[ 156.110] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 156.111] (II) Module extmod: vendor="X.Org Foundation"
[ 156.111] compiled for 1.8.1.902, module version = 1.0.0
[ 156.111] Module class: X.Org Server Extension
[ 156.111] ABI class: X.Org Server Extension, version 3.0
[ 156.111] (II) Loading extension MIT-SCREEN-SAVER
[ 156.111] (II) Loading extension XFree86-VidModeExtension
[ 156.111] (II) Loading extension XFree86-DGA
[ 156.111] (II) Loading extension DPMS
[ 156.111] (II) Loading extension XVideo
[ 156.111] (II) Loading extension XVideo-MotionCompensation
[ 156.111] (II) Loading extension X-Resource
[ 156.111] (II) LoadModule: "dbe"
[ 156.111] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 156.111] (II) Module dbe: vendor="X.Org Foundation"
[ 156.111] compiled for 1.8.1.902, module version = 1.0.0
[ 156.111] Module class: X.Org Server Extension
[ 156.111] ABI class: X.Org Server Extension, version 3.0
[ 156.111] (II) Loading extension DOUBLE-BUFFER
[ 156.111] (II) LoadModule: "glx"
[ 156.111] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 156.127] (II) Module glx: vendor="NVIDIA Corporation"
[ 156.128] compiled for 4.0.2, module version = 1.0.0
[ 156.128] Module class: X.Org Server Extension
[ 156.128] (II) NVIDIA GLX Module 256.35 Wed Jun 16 19:10:31 PDT 2010
[ 156.128] (II) Loading extension GLX
[ 156.128] (II) LoadModule: "record"
[ 156.128] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 156.128] (II) Module record: vendor="X.Org Foundation"
[ 156.128] compiled for 1.8.1.902, module version = 1.13.0
[ 156.128] Module class: X.Org Server Extension
[ 156.128] ABI class: X.Org Server Extension, version 3.0
[ 156.128] (II) Loading extension RECORD
[ 156.128] (II) LoadModule: "dri"
[ 156.128] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 156.129] (II) Module dri: vendor="X.Org Foundation"
[ 156.129] compiled for 1.8.1.902, module version = 1.0.0
[ 156.129] ABI class: X.Org Server Extension, version 3.0
[ 156.129] (II) Loading extension XFree86-DRI
[ 156.129] (II) LoadModule: "dri2"
[ 156.129] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 156.129] (II) Module dri2: vendor="X.Org Foundation"
[ 156.129] compiled for 1.8.1.902, module version = 1.2.0
[ 156.129] ABI class: X.Org Server Extension, version 3.0
[ 156.129] (II) Loading extension DRI2
[ 156.129] (II) LoadModule: "nvidia"
[ 156.129] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 156.130] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 156.130] compiled for 4.0.2, module version = 1.0.0
[ 156.130] Module class: X.Org Video Driver
[ 156.130] (II) NVIDIA dlloader X Driver 256.35 Wed Jun 16 18:45:02 PDT 2010
[ 156.130] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 156.130] (--) using VT number 7
[ 156.134] (II) Primary Device is: PCI 02@00:00:0
[ 156.134] (II) Loading sub module "fb"
[ 156.134] (II) LoadModule: "fb"
[ 156.134] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 156.134] (II) Module fb: vendor="X.Org Foundation"
[ 156.134] compiled for 1.8.1.902, module version = 1.0.0
[ 156.134] ABI class: X.Org ANSI C Emulation, version 0.4
[ 156.134] (II) Loading sub module "wfb"
[ 156.134] (II) LoadModule: "wfb"
[ 156.135] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 156.135] (II) Module wfb: vendor="X.Org Foundation"
[ 156.135] compiled for 1.8.1.902, module version = 1.0.0
[ 156.135] ABI class: X.Org ANSI C Emulation, version 0.4
[ 156.135] (II) Loading sub module "ramdac"
[ 156.135] (II) LoadModule: "ramdac"
[ 156.135] (II) Module "ramdac" already built-in
[ 156.135] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 156.135] (==) NVIDIA(0): RGB weight 888
[ 156.135] (==) NVIDIA(0): Default visual is TrueColor
[ 156.135] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 156.135] (**) NVIDIA(0): Option "NoLogo" "true"
[ 156.135] (**) NVIDIA(0): Enabling RENDER acceleration
[ 156.135] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 156.135] (II) NVIDIA(0): enabled.
[ 156.360] (II) NVIDIA(0): NVIDIA GPU GeForce 9100M G (C77) at PCI:2:0:0 (GPU-0)
[ 156.360] (--) NVIDIA(0): Memory: 524288 kBytes
[ 156.360] (--) NVIDIA(0): VideoBIOS: 62.77.2c.00.00
[ 156.360] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 156.360] (--) NVIDIA(0): Connected display device(s) on GeForce 9100M G at PCI:2:0:0:
[ 156.360] (--) NVIDIA(0): Seiko/Epson (DFP-0)
[ 156.360] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[ 156.360] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
[ 156.373] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 156.373] (==) NVIDIA(0):
[ 156.373] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 156.373] (==) NVIDIA(0): will be used as the requested mode.
[ 156.373] (==) NVIDIA(0):
[ 156.374] (II) NVIDIA(0): Validated modes:
[ 156.374] (II) NVIDIA(0): "nvidia-auto-select"
[ 156.374] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[ 156.376] (--) NVIDIA(0): DPI set to (99, 97); computed from "UseEdidDpi" X config
[ 156.376] (--) NVIDIA(0): option
[ 156.376] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 156.376] (--) Depth 24 pixmap format is 32 bpp
[ 156.376] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 156.865] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce 9300M GS (G98) at PCI:3:0:0 (GPU-1)
[ 156.865] (--) NVIDIA(GPU-1): Memory: 524288 kBytes
[ 156.865] (--) NVIDIA(GPU-1): VideoBIOS: 62.98.3c.00.00
[ 156.865] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
[ 156.865] (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU
[ 156.865] (--) NVIDIA(GPU-1): Connected display device(s) on GeForce 9300M GS at PCI:3:0:0:
[ 156.865] (--) NVIDIA(GPU-1): none
[ 156.866] (II) NVIDIA(0): Initialized GPU GART.
[ 156.878] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 156.878] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 156.878] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 156.878] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 156.878] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 156.878] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 156.878] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 156.878] (II) NVIDIA(0): Config Options in the README.
[ 156.879] (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
[ 156.879] (II) NVIDIA(0): enough to receive ACPI hotkey events.
[ 156.879] (II) NVIDIA(0): ACPI brightness change hotkey events enabled.
[ 156.880] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 157.172] (II) Loading extension NV-GLX
[ 157.208] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 157.216] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 157.216] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 157.216] (==) NVIDIA(0): Backing store disabled
[ 157.216] (==) NVIDIA(0): Silken mouse enabled
[ 157.232] (**) NVIDIA(0): DPMS enabled
[ 157.232] (II) Loading extension NV-CONTROL
[ 157.233] (II) Loading extension XINERAMA
[ 157.233] (II) Loading sub module "dri2"
[ 157.233] (II) LoadModule: "dri2"
[ 157.233] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 157.233] (II) NVIDIA(0): [DRI2] Setup complete
[ 157.233] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 157.233] (==) RandR enabled
[ 157.233] (II) Initializing built-in extension Generic Event Extension
[ 157.233] (II) Initializing built-in extension SHAPE
[ 157.233] (II) Initializing built-in extension MIT-SHM
[ 157.233] (II) Initializing built-in extension XInputExtension
[ 157.233] (II) Initializing built-in extension XTEST
[ 157.233] (II) Initializing built-in extension BIG-REQUESTS
[ 157.233] (II) Initializing built-in extension SYNC
[ 157.233] (II) Initializing built-in extension XKEYBOARD
[ 157.233] (II) Initializing built-in extension XC-MISC
[ 157.233] (II) Initializing built-in extension SECURITY
[ 157.233] (II) Initializing built-in extension XINERAMA
[ 157.233] (II) Initializing built-in extension XFIXES
[ 157.233] (II) Initializing built-in extension RENDER
[ 157.233] (II) Initializing built-in extension RANDR
[ 157.233] (II) Initializing built-in extension COMPOSITE
[ 157.233] (II) Initializing built-in extension DAMAGE
[ 157.236] (II) Initializing extension GLX
[ 157.423] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 157.423] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 157.423] (II) LoadModule: "evdev"
[ 157.423] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 157.423] (II) Module evdev: vendor="X.Org Foundation"
[ 157.423] compiled for 1.8.0, module version = 2.4.0
[ 157.423] Module class: X.Org XInput Driver
[ 157.423] ABI class: X.Org XInput driver, version 9.0
[ 157.423] (**) Power Button: always reports core events
[ 157.423] (**) Power Button: Device: "/dev/input/event5"
[ 157.433] (II) Power Button: Found keys
[ 157.433] (II) Power Button: Configuring as keyboard
[ 157.433] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 157.433] (**) Option "xkb_rules" "evdev"
[ 157.433] (**) Option "xkb_model" "evdev"
[ 157.433] (**) Option "xkb_layout" "cz"
[ 157.433] (**) Option "xkb_variant" "qwerty"
[ 157.433] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.469] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 157.469] (II) No input driver/identifier specified (ignoring)
[ 157.470] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 157.470] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 157.470] (**) Sleep Button: always reports core events
[ 157.470] (**) Sleep Button: Device: "/dev/input/event3"
[ 157.480] (II) Sleep Button: Found keys
[ 157.480] (II) Sleep Button: Configuring as keyboard
[ 157.480] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 157.480] (**) Option "xkb_rules" "evdev"
[ 157.480] (**) Option "xkb_model" "evdev"
[ 157.480] (**) Option "xkb_layout" "cz"
[ 157.480] (**) Option "xkb_variant" "qwerty"
[ 157.480] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.481] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 157.481] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 157.481] (**) Video Bus: always reports core events
[ 157.481] (**) Video Bus: Device: "/dev/input/event6"
[ 157.490] (II) Video Bus: Found keys
[ 157.490] (II) Video Bus: Configuring as keyboard
[ 157.490] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 157.490] (**) Option "xkb_rules" "evdev"
[ 157.490] (**) Option "xkb_model" "evdev"
[ 157.490] (**) Option "xkb_layout" "cz"
[ 157.490] (**) Option "xkb_variant" "qwerty"
[ 157.490] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.490] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 157.490] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 157.490] (**) Video Bus: always reports core events
[ 157.490] (**) Video Bus: Device: "/dev/input/event7"
[ 157.500] (II) Video Bus: Found keys
[ 157.500] (II) Video Bus: Configuring as keyboard
[ 157.500] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 157.500] (**) Option "xkb_rules" "evdev"
[ 157.500] (**) Option "xkb_model" "evdev"
[ 157.500] (**) Option "xkb_layout" "cz"
[ 157.500] (**) Option "xkb_variant" "qwerty"
[ 157.500] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.501] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 157.501] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 157.501] (**) Power Button: always reports core events
[ 157.501] (**) Power Button: Device: "/dev/input/event4"
[ 157.510] (II) Power Button: Found keys
[ 157.510] (II) Power Button: Configuring as keyboard
[ 157.510] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 157.510] (**) Option "xkb_rules" "evdev"
[ 157.510] (**) Option "xkb_model" "evdev"
[ 157.510] (**) Option "xkb_layout" "cz"
[ 157.510] (**) Option "xkb_variant" "qwerty"
[ 157.510] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.512] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9)
[ 157.512] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 157.512] (**) Logitech USB Receiver: always reports core events
[ 157.512] (**) Logitech USB Receiver: Device: "/dev/input/event9"
[ 157.523] (II) Logitech USB Receiver: Found keys
[ 157.523] (II) Logitech USB Receiver: Configuring as keyboard
[ 157.523] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 157.523] (**) Option "xkb_rules" "evdev"
[ 157.523] (**) Option "xkb_model" "evdev"
[ 157.523] (**) Option "xkb_layout" "cz"
[ 157.523] (**) Option "xkb_variant" "qwerty"
[ 157.523] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.524] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[ 157.524] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 157.524] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 157.524] (**) Logitech USB Receiver: always reports core events
[ 157.524] (**) Logitech USB Receiver: Device: "/dev/input/event10"
[ 157.536] (II) Logitech USB Receiver: Found 20 mouse buttons
[ 157.536] (II) Logitech USB Receiver: Found scroll wheel(s)
[ 157.536] (II) Logitech USB Receiver: Found relative axes
[ 157.536] (II) Logitech USB Receiver: Found x and y relative axes
[ 157.536] (II) Logitech USB Receiver: Found absolute axes
[ 157.536] (II) Logitech USB Receiver: Found keys
[ 157.536] (II) Logitech USB Receiver: Configuring as mouse
[ 157.536] (II) Logitech USB Receiver: Configuring as keyboard
[ 157.536] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 157.536] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 157.536] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 157.536] (**) Option "xkb_rules" "evdev"
[ 157.536] (**) Option "xkb_model" "evdev"
[ 157.536] (**) Option "xkb_layout" "cz"
[ 157.536] (**) Option "xkb_variant" "qwerty"
[ 157.536] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.537] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 157.537] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 157.537] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 157.537] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 157.537] (II) Logitech USB Receiver: initialized for relative axes.
[ 157.537] (WW) Logitech USB Receiver: ignoring absolute axes.
[ 157.537] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[ 157.537] (II) No input driver/identifier specified (ignoring)
[ 157.538] (II) config/udev: Adding input device MLK EU3C Wireless Office 200 (/dev/input/event11)
[ 157.538] (**) MLK EU3C Wireless Office 200: Applying InputClass "evdev keyboard catchall"
[ 157.538] (**) MLK EU3C Wireless Office 200: always reports core events
[ 157.538] (**) MLK EU3C Wireless Office 200: Device: "/dev/input/event11"
[ 157.553] (II) MLK EU3C Wireless Office 200: Found keys
[ 157.553] (II) MLK EU3C Wireless Office 200: Configuring as keyboard
[ 157.553] (II) XINPUT: Adding extended input device "MLK EU3C Wireless Office 200" (type: KEYBOARD)
[ 157.553] (**) Option "xkb_rules" "evdev"
[ 157.553] (**) Option "xkb_model" "evdev"
[ 157.553] (**) Option "xkb_layout" "cz"
[ 157.553] (**) Option "xkb_variant" "qwerty"
[ 157.553] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.554] (II) config/udev: Adding input device MLK EU3C Wireless Office 200 (/dev/input/event12)
[ 157.554] (**) MLK EU3C Wireless Office 200: Applying InputClass "evdev pointer catchall"
[ 157.554] (**) MLK EU3C Wireless Office 200: Applying InputClass "evdev keyboard catchall"
[ 157.554] (**) MLK EU3C Wireless Office 200: always reports core events
[ 157.554] (**) MLK EU3C Wireless Office 200: Device: "/dev/input/event12"
[ 157.566] (II) MLK EU3C Wireless Office 200: Found 9 mouse buttons
[ 157.566] (II) MLK EU3C Wireless Office 200: Found scroll wheel(s)
[ 157.566] (II) MLK EU3C Wireless Office 200: Found relative axes
[ 157.566] (II) MLK EU3C Wireless Office 200: Found x and y relative axes
[ 157.566] (II) MLK EU3C Wireless Office 200: Found absolute axes
[ 157.566] (II) MLK EU3C Wireless Office 200: Found keys
[ 157.566] (II) MLK EU3C Wireless Office 200: Configuring as mouse
[ 157.566] (II) MLK EU3C Wireless Office 200: Configuring as keyboard
[ 157.566] (**) MLK EU3C Wireless Office 200: YAxisMapping: buttons 4 and 5
[ 157.566] (**) MLK EU3C Wireless Office 200: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 157.566] (II) XINPUT: Adding extended input device "MLK EU3C Wireless Office 200" (type: KEYBOARD)
[ 157.566] (**) Option "xkb_rules" "evdev"
[ 157.566] (**) Option "xkb_model" "evdev"
[ 157.566] (**) Option "xkb_layout" "cz"
[ 157.566] (**) Option "xkb_variant" "qwerty"
[ 157.566] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.567] (**) MLK EU3C Wireless Office 200: (accel) keeping acceleration scheme 1
[ 157.567] (**) MLK EU3C Wireless Office 200: (accel) acceleration profile 0
[ 157.567] (**) MLK EU3C Wireless Office 200: (accel) acceleration factor: 2.000
[ 157.567] (**) MLK EU3C Wireless Office 200: (accel) acceleration threshold: 4
[ 157.567] (II) MLK EU3C Wireless Office 200: initialized for relative axes.
[ 157.567] (WW) MLK EU3C Wireless Office 200: ignoring absolute axes.
[ 157.567] (II) config/udev: Adding input device MLK EU3C Wireless Office 200 (/dev/input/mouse2)
[ 157.567] (II) No input driver/identifier specified (ignoring)
[ 157.567] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 157.567] (II) No input driver/identifier specified (ignoring)
[ 157.573] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 157.573] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 157.573] (**) AT Translated Set 2 keyboard: always reports core events
[ 157.573] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 157.580] (II) AT Translated Set 2 keyboard: Found keys
[ 157.580] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 157.580] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 157.580] (**) Option "xkb_rules" "evdev"
[ 157.580] (**) Option "xkb_model" "evdev"
[ 157.580] (**) Option "xkb_layout" "cz"
[ 157.580] (**) Option "xkb_variant" "qwerty"
[ 157.580] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 157.580] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 157.580] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 157.580] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 157.580] (II) LoadModule: "synaptics"
[ 157.580] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 157.581] (II) Module synaptics: vendor="X.Org Foundation"
[ 157.581] compiled for 1.8.0.902, module version = 1.2.2
[ 157.581] Module class: X.Org XInput Driver
[ 157.581] ABI class: X.Org XInput driver, version 9.0
[ 157.581] (II) Synaptics touchpad driver version 1.2.2
[ 157.581] (**) Option "Device" "/dev/input/event8"
[ 157.620] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 157.620] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 157.620] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 157.620] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 157.620] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 157.620] (**) Option "TapButton1" "1"
[ 157.620] (**) Option "TapButton2" "2"
[ 157.620] (**) Option "TapButton3" "3"
[ 157.646] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 157.646] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 157.660] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 157.660] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 157.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 157.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 157.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 157.686] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 157.686] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 157.686] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 157.686] (II) Synaptics touchpad driver version 1.2.2
[ 158.333] SynPS/2 Synaptics TouchPad no synaptics event device found
[ 158.333] (**) Option "Device" "/dev/input/mouse0"
[ 158.346] (**) Option "TapButton1" "1"
[ 158.346] (**) Option "TapButton2" "2"
[ 158.346] (**) Option "TapButton3" "3"
[ 158.366] Query no Synaptics: 6003C8
[ 158.366] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 158.367] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 158.406] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[ 158.406] (II) UnloadModule: "synaptics"
[ 158.406] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 158.406] (II) No input driver/identifier specified (ignoring)
[ 222.970] (II) Power Button: Close
[ 222.970] (II) UnloadModule: "evdev"
[ 222.990] (II) Sleep Button: Close
[ 222.990] (II) UnloadModule: "evdev"
[ 223.016] (II) Video Bus: Close
[ 223.016] (II) UnloadModule: "evdev"
[ 223.036] (II) Video Bus: Close
[ 223.036] (II) UnloadModule: "evdev"
[ 223.056] (II) Power Button: Close
[ 223.056] (II) UnloadModule: "evdev"
[ 223.076] (II) Logitech USB Receiver: Close
[ 223.076] (II) UnloadModule: "evdev"
[ 223.096] (II) Logitech USB Receiver: Close
[ 223.096] (II) UnloadModule: "evdev"
[ 223.116] (II) MLK EU3C Wireless Office 200: Close
[ 223.116] (II) UnloadModule: "evdev"
[ 223.136] (II) MLK EU3C Wireless Office 200: Close
[ 223.136] (II) UnloadModule: "evdev"
[ 223.156] (II) AT Translated Set 2 keyboard: Close
[ 223.156] (II) UnloadModule: "evdev"
[ 223.190] (II) UnloadModule: "synaptics"
$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.35 ([email protected]) Wed Jun 16 19:15:05 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection

I was having this exact same problem, then it just stopped. I am using the nouveau driver and I have a tnt2 card.
IIRC, I was having an unrelated problem with xorg or udev or something was having problems detecting my monitor, it claimed I had two monitors connected, I wrote an xorg.conf file and that fixed the problem. IDK if its is related or not because I don't recall exactly when things started working when I would switch ttys.
Try using the nouveau driver and see if it does the same thing, it has a kernel module so it might make difference,
Last edited by RiceKills (2010-07-06 23:39:27)

Xorg freezes, video lags, high log output (linux,xorg-server,nvidia)

Hey,
It seems the up-to-date system doesn't work for my Laptop anymore. Wasn't too sure where to post this, as I couldn't test this anywhere else yet.
I experience extreme lags in Xorg (apparently due to high log output to Xorg.0.log as mentioned here: https://bbs.archlinux.org/viewtopic.php … 9#p1305939 ). These lags seem to be related to Xorg, the linux kernel and maybe something else I haven't found yet.
Concerning the hardware: Dell XPS 1340 with:
00:00.0 Host bridge: NVIDIA Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: NVIDIA Corporation MCP79 LPC Bridge (rev b2)
00:03.1 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.2 SMBus: NVIDIA Corporation MCP79 SMBus (rev b1)
00:03.3 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.5 Co-processor: NVIDIA Corporation MCP79 Co-processor (rev b1)
00:04.0 USB controller: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:04.1 USB controller: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:06.0 USB controller: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:06.1 USB controller: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:08.0 Audio device: NVIDIA Corporation MCP79 High Definition Audio (rev b1)
00:09.0 PCI bridge: NVIDIA Corporation MCP79 PCI Bridge (rev b1)
00:0a.0 Ethernet controller: NVIDIA Corporation MCP79 Ethernet (rev b1)
00:0b.0 SATA controller: NVIDIA Corporation MCP79 AHCI Controller (rev b1)
00:0c.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:10.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:15.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:16.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:17.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:18.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
01:07.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
01:07.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
01:07.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
01:07.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
02:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce 9200M GS] (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation C79 [GeForce 9400M G] (rev b1)
06:00.0 Network controller: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) (rev 01)
I tested the up-to-date nvidia and nouveau drivers, to no avail. They both spam Xorg.0.log as soon as I watch a video, move a window or do something similiar "hi-res" in Gnome, leading to lags in all applications and X itself until it dies from high CPU usage + high chip temperature.
So I started downgrading my system.
I tested linux 3.9.9 but that didn't do the trick.
Currently I'm on linux 3.8.8-2, nvidia 313.30-5 and xorg-server 1.13.3-1, xf86-input-evdev 2.7.3-2 and xf86-input-wacom 0.20.0-1. This seems to be stable so far, the extreme X log output persists though, as soon as an external monitor is plugged in:
[ 234.963] (II) NVIDIA(GPU-0): Display (DELL2407WFPHC (DFP-1)) does not support NVIDIA 3D
[ 234.963] (II) NVIDIA(GPU-0): Vision stereo.
[ 234.963] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 234.963] (**) NVIDIA(0): device DELL2407WFPHC (DFP-1) (Using EDID frequencies has
[ 234.963] (**) NVIDIA(0): been enabled on all display devices.)
I tried nvidia drivers with and without my xorg.conf.d snippets, but that didn't change anything.
I'm kinda clueless... which package is the odd one out? All of them? At this point I wouldn't even know where to file a bug report.
I've been away for a couple of months and didn't upgrade the system too often in between, but this behavior is really odd.
Any ideas/ help would be highly appreciated!

Okay... I can definitely revise my statement about the Xorg.0.log. It has been the same since yesterday... so the spamming is gone!
I'd really like to find out if this is a linux kernel or a direct Xorg problem (of version 1.14 and above).

Linux crashes after about 5 minutes (when I start Xorg)

Hello,
my linux-system hasn't been stable a lot during the last couple of weeks, ... or even since I used linux on my system. Only once, when I used a specific version of the nvidia-drivers as my system really stable. Mostly, it was stable enough to use. Maybe I'm wrong, but that is my impression at the moment. I have to say that my chipset (via kt133 I think) or the implementation of it, can have a problem which causes this instability.
Anyway, the last time, it was only the screenimage that stopped working. Sound, ... kept on going, so I supposed it was an xorg-problem ...?
However, since the last archlinux kernelupdate (and I also tried my own custom-kernels with 2.6.16.x as the base-kernel), linux crashes very quickly as soon as I start xorg and my internet-connection (but it happens also without my internet-connection up it seems). This time, also the music stops playing.
Now, I heard of cases where Xorg starts using 100% cpu, but I can't login with ssh or so, although there may be others possibilities.
I notice that when my screen, ... freezes the led of my harddisk is ona nd stays on.
I'm not sure about the following. I once enabled logging and got some output on a vt. I thought that ther system frooze (my harddisk light was on it seemed) and some moments later my system went on working. I'm not sure if this is the same as what I experience most of the time, since it doesn't seem to come out of it (or maybe I haev to wait longer ...). Anyway, I got:
dmastatus=0x61
DMAXxxx error
status=0x58
DriverReady SeekComplete Datarequest failed
opcode was unknown
My Question: Does anyone else experience these instability-problems with the latest kernel?
I may compile xorg myself and wee what it gives ...
thank you and greetings,
Michel

DriveReadySeekComplete errors are either:
- IDE controler failure
- Bad cables
- Bad harddisk
Out of these 3, the last one sounds the most reasonable with nowadays harddrives. And yes, your system will hang when all your important processes are hanging while trying to do disk I/O.
What windows does is switching back to PIO mode and never report anything, until you hit the nice BSOD telling you to replace the floppydisk in drive C...

Make a router out of a simple notebook with one NIC (buy a second NIC)

Hello all,
Before starting, I think I must say hello to you because I'm new here : this is my first post . So, in fact, I'm working with Linux since 5 years. I'm running Gentoo on my workstation and my old server, Ubuntu on my notebook and for family, and finaly, I'm running Red Hat at work place for workstation and servers. I'm a Linux and JBoss administrator .
I've decided to run/try Arch because it seams to growth with rock-solid ideas and it's a binary distribution. I now prefer a binary distribution for my server, because it's taking too much time to let old computer or notebook compile the whole world (alone or not ...). I prefer now looking around and learn another Linux distribution. This is why I started to install my first Arch Linux : I will try to run a server on a simple notebook. In fact, it's a working machine, but without any graphics capabilities (memory has burned...), and so, perfect for a little server low consumption. I want it to replace my current server/router running Gentoo on an old Pentium 3.
For now, I've encountered these little problem :
- LID problem when screen is close : reboot never work (power off just after the BIOS, when the LID state is "screen closed"...) => disable LID connection (unplugged from motherboard)
- ssh problem => must now use "/etc/hosts.allow" to let remote machine to be connected
- try routing packet with one NIC => for now, doesn't work ...
- try to get X11 Forwarding => doesn't work too, but it will works quickly
My infrastructure is just a server/router splitting in two part for the LAN at home :
- one part is LAN with all workstations
- the other part is LAN_router which is another network with only the ADSL router to access internet
So, its looking like this : <machine1> => <switch> => <[eth1]server/router[eth0]> => <switch> => <router_ADSL> => INTERNET
All is fine ... with the old machine ... for the new one, it has only one network interface ... The question is : how to do routing with only one NIC ???
In theory, I "should" work ... but .. some component can have some little hard time to do the right things .. and for me, is not working right now.
The first try is to use one interface with one IP aliasing, like this :
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:1d:e4:a3:d5:1a brd ff:ff:ff:ff:ff:ff
inet 10.2.1.8/26 brd 10.2.1.63 scope global eth0
inet 10.2.1.66/26 brd 10.2.1.127 scope global eth0:0
inet6 fc80::21a:e2ff:fea3:d56a/64 scope link
valid_lft forever preferred_lft forever
Two sub network are used :
- 10.2.1.0/26
- 10.2.1.64/26
I must have 2 ip on one NIC, so aliasing can be used (when testing, the new server/router is able to ping a workstation and the ADSL router ; it can also use internet). I've heart there is some problem with "iptables" to set forwarding rules when using IP Aliasing ... but I prefer try myself . It doesn't work for now, probably because of this. But, is there a way to use a "workaround" ? For example, if "iptables" is not able to play with aliasing, and so, interface such as "eth0:0", may be there is a way to tell it, like this :
[root@serveurn ~]# iptables-save
# Generated by iptables-save v1.4.10 on Sun Dec 12 17:30:01 2010
*nat
:PREROUTING ACCEPT [0:0]
:INPUT ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
-A POSTROUTING ! -d 10.2.1.0/26 -o eth0 -j SNAT --to-source 10.2.1.66
COMMIT
# Completed on Sun Dec 12 17:30:01 2010
# Generated by iptables-save v1.4.10 on Sun Dec 12 17:30:01 2010
*filter
:INPUT DROP [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [9:932]
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -s 10.2.1.0/26 -p tcp -m tcp --dport 22 -j ACCEPT
-A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
COMMIT
# Completed on Sun Dec 12 17:30:01 2010
... use the interface "eth0" (for the whole throughput) and do SNAT for all excepted for the LAN network ? But it seams to not work ...
I got a second idea : if it wan't work with aliasing ... may be can I use virtual interface and bridge ... create a bridge with "eth0" and "tap0" so I can add more than one ip in the machine .. and may be, will be able to route packet from these two interface ???
But for now, I have to understand why X11 Forwarding don't work ...
EDIT: xorg problem solved : xorg-auth was requested ...
Last edited by loopx (2011-01-09 18:08:28)

fukawi2 wrote:" ...it is dirty and nasty and shouldn't be done unless you're stuck on a deserted island and your only hope of rescue is building a router out of 2 coconuts, a sea shell and a single NIC that was washed up on the beach in the last storm. "
PRICELESS !!
@loopx: Honestly: return the USB NIC you just got, buy a compatible device(maybe an asus rt-n16) and install dd-wrt. You'll be a lot happier....
Last edited by Daniel_F (2011-01-10 00:34:08)

No keyboard/mouse working after update

Today I performed a regular pacman -Syu and rebooted the system (a laptop). After that, X loads until GMD, but I can't use any of the input devices.
I can access as single user (no network, BTW) and downgraded xorg-server and xorg-server-common (Reading the forum pointed to a xorg problem). There's no xorg.conf in this machine.
I'm a bit loss. Any idea? Should I downgrade kernel26 (and headers, manpages; all to 2.6.36.3-2), linux-api-headers, and mkinitcpio, also? If so, any order required?
Thanks and greets
Edit: Dependencias includes binutils and glibc
Last edited by [KNS]Kumo (2011-02-02 22:12:11)

I did it anyway, and worked.
I'm waiting until I check everything is working fine before mark the post as solved.

KVM switch w/ usb i/o for keyboard mouse doesn't work [Solved]

Edit:
This problem appears to have magically disapeared. I'm still not sure why it happened or why it has ceased.
Hello Everybody,
I'm not sure why this is happening, but I've got a KVM switch that used to get "automagically" detected as "a no-brand KVM switch" on boot-up that has ceased working. I don't get this "no brand KVM switch" detected on boot-up anymore, but I can use the VGA part of the switch, at least, however the keyboard and mouse don't work unless plugged directly into the computer.
Below I've attached the result of
dmesg | grep --context=3 usb
dmesg | grep kvm
returns no result.
The most signifcant thing seems to be:
usb 1-2: new full speed USB device using uhci_hcd and address 7
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 8
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 9
usb 1-2: device not accepting address 9, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 10
usb 1-2: device not accepting address 10, error -71
hub 1-0:1.0: unable to enumerate USB device on port 2
I've googled this, and somewhere it was suggested this mean the usb device is not drawing power. The only thing that has happened that I can imagine as being the culprit between function/dysfunction here is that there was a power outage (circuit breaker tripped), and though my computers were on battery-backup, the monitor is not. I don't suppose that this could have messed up the switch?
Note this problem is uniform across 3 computers, 2 which have recently run a system update, but the 3rd has not recently run an update, this is not an Xorg problem, "K and M" don't work in either console or X.
Any help would be appreciated. Below as, mentioned previously, is the output of
dmesg | grep --context=3 usb
included on the off-chance that someone sees something significant there.
ata1.00: configured for UDMA/100
ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-4480B, GW02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA WDC WD400EB-11CP 06.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4480B GW02 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
huhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: device descriptor read/64, error -71
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa7fc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
hub 1-0:1.0: unable to enumerate USB device on port 2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 4
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 5
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
usb 1-2: device not accepting address 5, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 6
usb 1-2: device not accepting address 6, error -71
hub 1-0:1.0: unable to enumerate USB device on port 2
usb 3-2: new low speed USB device using uhci_hcd and address 2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e100 0000:01:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xff8fe000, irq 20, MAC addr 00:07:e9:50:88:58
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
usb 3-2: configuration #1 chosen from 1 choice
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
usbcore: registered new interface driver hiddev
input: Logitech USB Optical Mouse as /class/input/input2
input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
intel8x0_measure_ac97_clock: measured 50831 usecs
intel8x0: clocking to 48000
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input4
reserve_memtype failed 0xf0000000-0xf8000000, track write-combining, req write-combining
X:2394 freeing invalid memtype f0000000-f8000000
X:2367 conflicting memory types f0000000-f8000000 write-combining<->uncached-minus
reserve_memtype failed 0xf0000000-0xf8000000, track write-combining, req write-combining
X:2395 freeing invalid memtype f0000000-f8000000
usb 1-2: new full speed USB device using uhci_hcd and address 7
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 8
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 9
usb 1-2: device not accepting address 9, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 10
usb 1-2: device not accepting address 10, error -71
hub 1-0:1.0: unable to enumerate USB device on port 2
Thanks again!
Last edited by pseudonomous (2008-12-30 23:57:47)

i'm sorry, but this is all software related then. if you haven't already, run disk utility a few times to try to correct the error. otherwise, you should back up your info immediately if you can. if you can access another mac you can do that with firewire target disk mode. http://docs.info.apple.com/article.html?artnum=58583. the other mac has to have built-in firewire. then you can try to repair the directory with a third party utility like diskwarrior or techtool pro. if it cannot solve the problem, or if you do not want to spend the money on the software, you have no choice but to erase and install your operating system. do you already have your info backed up?? it's always a good idea. keep us posted as to how it's going for you or if you have any further questions. [ 8 ) ]

Display is corrupted for GDM / Gnome (ATI card)

I've done a clean install of Arch on a Toshiba laptop, but when gdm starts the display is corrupted with lots of strange artefacts (diagonal slashes across the screen, that sort of thing). Previously Gnome/GDM worked fine on this same laptop.
When I try running startx with xorg-twm installed, the screen displays fine, so I don't think it can be an Xorg problem per se.
Any help will be gratefully received!
Not sure what information people will find most useful, but here is the output of lspci:
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (Internal gfx)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Device 7914
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Port 1)
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Port 2)
00:12.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI0)
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI1)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI2)
00:13.3 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI3)
00:13.4 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI4)
00:13.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB Controller (EHCI)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB600 IDE
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB600 PCI to LPC Bridge
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS690M [Radeon Xpress 1200/1250/1270]
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
14:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
14:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
14:06.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
14:06.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
Am running the latest 64-bit kernel and have latest xf86-video-ati driver installed. System is generally up to date - though the problem goes back to when I did the install two or three weeks ago, so it's not to do with any new version since then.
Content of /var/log/Xorg.0.log:
[ 12.559]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 12.559] X Protocol Version 11, Revision 0
[ 12.559] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[ 12.559] Current Operating System: Linux toshiba-64-laptop 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[ 12.559] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=dcfe064f-9439-44c0-aff1-35896be3dc69 rw quiet
[ 12.560] Build Date: 01 November 2013 05:10:48PM
[ 12.560]
[ 12.560] Current version of pixman: 0.30.2
[ 12.560] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.560] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.560] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 9 11:12:28 2013
[ 12.742] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12.742] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12.914] (==) No Layout section. Using the first Screen section.
[ 12.914] (==) No screen section available. Using defaults.
[ 12.914] (**) |-->Screen "Default Screen Section" (0)
[ 12.914] (**) | |-->Monitor "<default monitor>"
[ 12.914] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 12.915] (**) | |-->Device "Radeon"
[ 12.915] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.915] (==) Automatically adding devices
[ 12.915] (==) Automatically enabling devices
[ 12.915] (==) Automatically adding GPU devices
[ 12.958] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 12.958] Entry deleted from font path.
[ 12.998] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 12.998] Entry deleted from font path.
[ 12.998] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 12.998] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 12.998] Entry deleted from font path.
[ 12.998] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 12.998] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 12.998] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.998] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.998] (II) Loader magic: 0x7fdc20
[ 12.998] (II) Module ABI versions:
[ 12.998] X.Org ANSI C Emulation: 0.4
[ 12.999] X.Org Video Driver: 14.1
[ 12.999] X.Org XInput driver : 19.1
[ 12.999] X.Org Server Extension : 7.0
[ 13.000] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.005] (--) PCI:*(0:1:5:0) 1002:791f:1179:ff1a rev 0, Mem @ 0xf0000000/134217728, 0xf8100000/65536, 0xf8000000/1048576, I/O @ 0x00009000/256
[ 13.034] Initializing built-in extension Generic Event Extension
[ 13.034] Initializing built-in extension SHAPE
[ 13.034] Initializing built-in extension MIT-SHM
[ 13.034] Initializing built-in extension XInputExtension
[ 13.034] Initializing built-in extension XTEST
[ 13.034] Initializing built-in extension BIG-REQUESTS
[ 13.034] Initializing built-in extension SYNC
[ 13.034] Initializing built-in extension XKEYBOARD
[ 13.034] Initializing built-in extension XC-MISC
[ 13.034] Initializing built-in extension SECURITY
[ 13.034] Initializing built-in extension XINERAMA
[ 13.034] Initializing built-in extension XFIXES
[ 13.034] Initializing built-in extension RENDER
[ 13.035] Initializing built-in extension RANDR
[ 13.035] Initializing built-in extension COMPOSITE
[ 13.035] Initializing built-in extension DAMAGE
[ 13.035] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.035] Initializing built-in extension DOUBLE-BUFFER
[ 13.035] Initializing built-in extension RECORD
[ 13.035] Initializing built-in extension DPMS
[ 13.035] Initializing built-in extension X-Resource
[ 13.035] Initializing built-in extension XVideo
[ 13.035] Initializing built-in extension XVideo-MotionCompensation
[ 13.035] Initializing built-in extension XFree86-VidModeExtension
[ 13.035] Initializing built-in extension XFree86-DGA
[ 13.035] Initializing built-in extension XFree86-DRI
[ 13.035] Initializing built-in extension DRI2
[ 13.035] (II) "glx" will be loaded by default.
[ 13.035] (II) LoadModule: "dri2"
[ 13.036] (II) Module "dri2" already built-in
[ 13.036] (II) LoadModule: "glamoregl"
[ 13.106] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 13.582] (II) Module glamoregl: vendor="X.Org Foundation"
[ 13.582] compiled for 1.14.2, module version = 0.5.1
[ 13.582] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.582] (II) LoadModule: "glx"
[ 13.583] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.662] (II) Module glx: vendor="X.Org Foundation"
[ 13.662] compiled for 1.14.4, module version = 1.0.0
[ 13.662] ABI class: X.Org Server Extension, version 7.0
[ 13.662] (==) AIGLX enabled
[ 13.663] Loading extension GLX
[ 13.663] (II) LoadModule: "radeon"
[ 13.663] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 13.700] (II) Module radeon: vendor="X.Org Foundation"
[ 13.700] compiled for 1.14.2, module version = 7.2.0
[ 13.700] Module class: X.Org Video Driver
[ 13.700] ABI class: X.Org Video Driver, version 14.1
[ 13.700] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI
[ 13.748] (++) using VT number 1
[ 13.755] (II) [KMS] Kernel modesetting enabled.
[ 13.755] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.755] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 13.756] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 13.756] (==) RADEON(0): Default visual is TrueColor
[ 13.756] (**) RADEON(0): Option "EXAPixmaps" "off"
[ 13.756] (==) RADEON(0): RGB weight 888
[ 13.756] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 13.756] (--) RADEON(0): Chipset: "ATI Radeon X1200" (ChipID = 0x791f)
[ 13.756] (II) Loading sub module "dri2"
[ 13.756] (II) LoadModule: "dri2"
[ 13.756] (II) Module "dri2" already built-in
[ 13.756] (II) Loading sub module "exa"
[ 13.757] (II) LoadModule: "exa"
[ 13.757] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 13.764] (II) Module exa: vendor="X.Org Foundation"
[ 13.764] compiled for 1.14.4, module version = 2.6.0
[ 13.764] ABI class: X.Org Video Driver, version 14.1
[ 13.765] (II) RADEON(0): KMS Color Tiling: enabled
[ 13.765] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 13.765] (II) RADEON(0): KMS Pageflipping: enabled
[ 13.765] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 13.930] (II) RADEON(0): Output VGA-0 has no monitor section
[ 13.930] (II) RADEON(0): Output LVDS has no monitor section
[ 14.096] (II) RADEON(0): Output S-video has no monitor section
[ 14.263] (II) RADEON(0): EDID for output VGA-0
[ 14.263] (II) RADEON(0): EDID for output LVDS
[ 14.263] (II) RADEON(0): Manufacturer: SEC Model: 3645 Serial#: 0
[ 14.263] (II) RADEON(0): Year: 2005 Week: 0
[ 14.264] (II) RADEON(0): EDID Version: 1.3
[ 14.264] (II) RADEON(0): Digital Display Input
[ 14.264] (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 14.264] (II) RADEON(0): Gamma: 2.20
[ 14.264] (II) RADEON(0): No DPMS capabilities specified
[ 14.264] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 14.264] (II) RADEON(0): First detailed timing is preferred mode
[ 14.264] (II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 14.264] (II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 14.264] (II) RADEON(0): Manufacturer's mask: 0
[ 14.264] (II) RADEON(0): Supported detailed timing:
[ 14.264] (II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 14.264] (II) RADEON(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
[ 14.264] (II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 14.265] (II) RADEON(0): Unknown vendor-specific block f
[ 14.265] (II) RADEON(0): SAMSUNG
[ 14.265] (II) RADEON(0): LTN154X3-L05
[ 14.265] (II) RADEON(0): EDID (in hex):
[ 14.265] (II) RADEON(0): 00ffffffffffff004ca3453600000000
[ 14.265] (II) RADEON(0): 000f0103802115780a87f594574f8c27
[ 14.265] (II) RADEON(0): 27505400000001010101010101010101
[ 14.265] (II) RADEON(0): 010101010101ee1a0080502010301030
[ 14.265] (II) RADEON(0): 13004bcf100000190000000f00000000
[ 14.265] (II) RADEON(0): 00000000002387026400000000fe0053
[ 14.265] (II) RADEON(0): 414d53554e470a2020202020000000fe
[ 14.265] (II) RADEON(0): 004c544e31353458332d4c30350a0061
[ 14.265] (II) RADEON(0): Printing probed modes for output LVDS
[ 14.265] (II) RADEON(0): Modeline "1280x800"x60.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)
[ 14.265] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 14.266] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 14.266] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 14.266] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 14.266] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 14.266] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 14.266] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 14.430] (II) RADEON(0): EDID for output S-video
[ 14.430] (II) RADEON(0): Output VGA-0 disconnected
[ 14.430] (II) RADEON(0): Output LVDS connected
[ 14.430] (II) RADEON(0): Output S-video disconnected
[ 14.430] (II) RADEON(0): Using exact sizes for initial modes
[ 14.430] (II) RADEON(0): Output LVDS using initial mode 1280x800
[ 14.430] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 14.430] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:8000000 visible:7bd8000
[ 14.430] (II) RADEON(0): EXA: Driver will not allow EXA pixmaps in VRAM
[ 14.430] (==) RADEON(0): DPI set to (96, 96)
[ 14.430] (II) Loading sub module "fb"
[ 14.430] (II) LoadModule: "fb"
[ 14.431] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.443] (II) Module fb: vendor="X.Org Foundation"
[ 14.444] compiled for 1.14.4, module version = 1.0.0
[ 14.444] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.444] (II) Loading sub module "ramdac"
[ 14.444] (II) LoadModule: "ramdac"
[ 14.444] (II) Module "ramdac" already built-in
[ 14.444] (--) Depth 24 pixmap format is 32 bpp
[ 14.445] (II) RADEON(0): [DRI2] Setup complete
[ 14.445] (II) RADEON(0): [DRI2] DRI driver: r300
[ 14.445] (II) RADEON(0): [DRI2] VDPAU driver: r300
[ 14.446] (II) RADEON(0): Front buffer size: 4000K
[ 14.446] (II) RADEON(0): VRAM usage limit set to 110505K
[ 14.447] (==) RADEON(0): Backing store disabled
[ 14.448] (II) RADEON(0): Direct rendering enabled
[ 14.448] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 14.448] (II) EXA(0): Driver allocated offscreen pixmaps
[ 14.448] (II) EXA(0): Driver registered support for the following operations:
[ 14.448] (II) Solid
[ 14.448] (II) Copy
[ 14.448] (II) Composite (RENDER acceleration)
[ 14.448] (II) UploadToScreen
[ 14.448] (II) DownloadFromScreen
[ 14.448] (II) RADEON(0): Acceleration enabled
[ 14.448] (==) RADEON(0): DPMS enabled
[ 14.448] (==) RADEON(0): Silken mouse enabled
[ 14.449] (II) RADEON(0): Set up textured video
[ 14.449] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 14.449] (II) RADEON(0): [XvMC] Extension initialized.
[ 14.449] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 14.450] (WW) RADEON(0): Option "AccelDFS" is not used
[ 14.450] (--) RandR disabled
[ 15.236] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 15.236] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 15.236] (II) AIGLX: enabled GLX_ARB_create_context
[ 15.236] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 15.236] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 15.236] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 15.236] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 15.238] (II) AIGLX: Loaded and initialized r300
[ 15.238] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 15.254] (II) RADEON(0): Setting screen physical size to 338 x 211
[ 15.775] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 15.776] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.776] (II) LoadModule: "evdev"
[ 15.776] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.788] (II) Module evdev: vendor="X.Org Foundation"
[ 15.788] compiled for 1.14.3, module version = 2.8.2
[ 15.788] Module class: X.Org XInput Driver
[ 15.788] ABI class: X.Org XInput driver, version 19.1
[ 15.788] (II) Using input driver 'evdev' for 'Power Button'
[ 15.789] (**) Power Button: always reports core events
[ 15.789] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 15.789] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.789] (--) evdev: Power Button: Found keys
[ 15.789] (II) evdev: Power Button: Configuring as keyboard
[ 15.789] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 15.789] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 15.789] (**) Option "xkb_rules" "evdev"
[ 15.789] (**) Option "xkb_model" "pc104"
[ 15.789] (**) Option "xkb_layout" "us"
[ 15.905] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 15.906] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 15.906] (II) Using input driver 'evdev' for 'Video Bus'
[ 15.906] (**) Video Bus: always reports core events
[ 15.906] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 15.906] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 15.906] (--) evdev: Video Bus: Found keys
[ 15.906] (II) evdev: Video Bus: Configuring as keyboard
[ 15.906] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/LNXVIDEO:00/input/input4/event4"
[ 15.906] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 15.906] (**) Option "xkb_rules" "evdev"
[ 15.906] (**) Option "xkb_model" "pc104"
[ 15.906] (**) Option "xkb_layout" "us"
[ 15.908] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 15.908] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.908] (II) Using input driver 'evdev' for 'Power Button'
[ 15.908] (**) Power Button: always reports core events
[ 15.908] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 15.909] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.909] (--) evdev: Power Button: Found keys
[ 15.909] (II) evdev: Power Button: Configuring as keyboard
[ 15.909] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 15.909] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 15.909] (**) Option "xkb_rules" "evdev"
[ 15.909] (**) Option "xkb_model" "pc104"
[ 15.909] (**) Option "xkb_layout" "us"
[ 15.911] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 15.911] (II) No input driver specified, ignoring this device.
[ 15.911] (II) This device may have been added with another device file.
[ 15.911] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 15.912] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 15.913] (II) No input driver specified, ignoring this device.
[ 15.913] (II) This device may have been added with another device file.
[ 15.913] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event8)
[ 15.914] (II) No input driver specified, ignoring this device.
[ 15.914] (II) This device may have been added with another device file.
[ 15.914] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event9)
[ 15.914] (II) No input driver specified, ignoring this device.
[ 15.915] (II) This device may have been added with another device file.
[ 15.915] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 15.915] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.916] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 15.916] (**) AT Translated Set 2 keyboard: always reports core events
[ 15.916] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 15.916] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 15.916] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 15.916] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 15.916] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 15.916] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 15.916] (**) Option "xkb_rules" "evdev"
[ 15.916] (**) Option "xkb_model" "pc104"
[ 15.916] (**) Option "xkb_layout" "us"
[ 15.918] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 15.918] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 15.918] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 15.918] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 15.918] (II) LoadModule: "synaptics"
[ 15.919] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 16.021] (II) Module synaptics: vendor="X.Org Foundation"
[ 16.021] compiled for 1.14.1, module version = 1.7.1
[ 16.021] Module class: X.Org XInput Driver
[ 16.021] ABI class: X.Org XInput driver, version 19.1
[ 16.021] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 16.022] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 16.022] (**) Option "Device" "/dev/input/event10"
[ 16.093] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 61)
[ 16.093] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 81)
[ 16.093] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 16.093] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 16.093] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[ 16.094] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 16.094] (**) Option "TapButton1" "1"
[ 16.094] (**) Option "TapButton2" "2"
[ 16.094] (**) Option "TapButton3" "3"
[ 16.094] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 16.094] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 16.126] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 16.126] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 16.127] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 16.127] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 16.127] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 16.128] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 16.128] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 16.128] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 16.128] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 16.128] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 16.129] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 16.129] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 16.130] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 16.130] (II) No input driver specified, ignoring this device.
[ 16.130] (II) This device may have been added with another device file.
[ 16.132] (II) config/udev: Adding input device Toshiba input device (/dev/input/event5)
[ 16.132] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"
[ 16.132] (II) Using input driver 'evdev' for 'Toshiba input device'
[ 16.132] (**) Toshiba input device: always reports core events
[ 16.132] (**) evdev: Toshiba input device: Device: "/dev/input/event5"
[ 16.132] (--) evdev: Toshiba input device: Vendor 0 Product 0
[ 16.132] (--) evdev: Toshiba input device: Found keys
[ 16.133] (II) evdev: Toshiba input device: Configuring as keyboard
[ 16.133] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 16.133] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 11)
[ 16.133] (**) Option "xkb_rules" "evdev"
[ 16.133] (**) Option "xkb_model" "pc104"
[ 16.133] (**) Option "xkb_layout" "us"
[ 24.913] (II) RADEON(0): EDID vendor "SEC", prod id 13893
[ 24.913] (II) RADEON(0): Printing DDC gathered Modelines:
[ 24.913] (II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)
[ 27.980] (II) RADEON(0): EDID vendor "SEC", prod id 13893
[ 27.980] (II) RADEON(0): Printing DDC gathered Modelines:
[ 27.980] (II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)
[ 57.993] (II) AIGLX: Suspending AIGLX clients for VT switch
If any other information would be useful, please let me know.

Supposed to mean a lack of good/clean +12VDC at the molex connector or could be flaky components in the DC-DC conversion on the board( ie bad voltage regulator or capacitors ).

Xorg problems.

Similar Messages

Maybe you are looking for