Xorg-server kdemod crashes
Hello!!
Last week I'm experiencing some crashes in xorg. At the beginning I thought they where because of xorg-server update (something that is still posible).
I use kdemod, and crashes where randomly, but since yesterday they happen as soon as I start my session. I installed fluxbox and gnome and both works like a charm (well under gnome I'm still suffering a problem with my keyboard, but it is usable).
this is my xorg.0.log
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux darksidex 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:56:24 UTC 2008 i686
Build Date: 05 December 2008 09:10:55PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 7 02:46:38 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) nVidia Corporation GeForce 7300 GT rev 162, Mem @ 0xd0000000/0, 0xc0000000/0, 0xd1000000/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 177.82 Tue Nov 4 14:03:48 PST 2008
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 177.82 Tue Nov 4 13:42:45 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "NvAGP" "1"
(**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "AllowGLXWithComposite" "true"
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Option "UseEvents" "false"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
(**) NVIDIA(0): Option "DisableGLXRootClipping"
(**) NVIDIA(0): Option "DamageEvents" "True"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "true"
(**) NVIDIA(0): Option "PixmapCacheSize" "70000"
(**) NVIDIA(0): Option "AllowSHMPixmaps" "0"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): ConnectedMonitor string: "DFP"
(**) NVIDIA(0): Use of NVIDIA internal AGP requested
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 7300 GT (G73) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 05.73.22.25.24
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7300 GT at PCI:1:0:0:
(--) NVIDIA(0): BenQ FP91G+ (DFP-0)
(--) NVIDIA(0): BenQ FP91G+ (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): BenQ FP91G+ (DFP-0): Internal Dual Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024"
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): "800x600"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(**) NVIDIA(0): Option "BackingStore" "True"
(**) NVIDIA(0): Backing store enabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
[config/dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.42" is not allowed to own the service "org.x.config.display0" due to security policies in the configuration file)
(II) config/hal: Adding input device KYE EasyTrack Optical U+P
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.7
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) KYE EasyTrack Optical U+P: always reports core events
(**) KYE EasyTrack Optical U+P: Device: "/dev/input/event3"
(II) KYE EasyTrack Optical U+P: Found x and y relative axes
(II) KYE EasyTrack Optical U+P: Found mouse buttons
(II) KYE EasyTrack Optical U+P: Configuring as mouse
(II) XINPUT: Adding extended input device "KYE EasyTrack Optical U+P" (type: MOUSE)
(II) config/hal: Adding input device GreenAsia Inc. USB Joystick
(**) GreenAsia Inc. USB Joystick: always reports core events
(**) GreenAsia Inc. USB Joystick: Device: "/dev/input/event2"
(II) GreenAsia Inc. USB Joystick: Found x and y absolute axes
(WW) GreenAsia Inc. USB Joystick: Don't know how to use device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for "GreenAsia Inc. USB Joystick"
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "es"
(**) AT Translated Set 2 keyboard: xkb_layout: "es"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x813017b]
1: /usr/bin/X(xf86SigHandler+0x51) [0x80d8cb1]
2: [0xb7f11400]
3: /usr/bin/X(UnmapWindow+0x1d8) [0x8076c78]
4: /usr/bin/X(compFreeClientWindow+0x23a) [0x81424aa]
5: /usr/bin/X [0x813f8f4]
6: /usr/bin/X(FreeResource+0x10c) [0x807454c]
7: /usr/bin/X(compUnredirectWindow+0x7b) [0x814204b]
8: /usr/bin/X [0x814024e]
9: /usr/bin/X [0x8128395]
10: /usr/bin/X [0x81282ac]
11: /usr/bin/X(miChangeSaveUnder+0x6b) [0x812844b]
12: /usr/bin/X(MapWindow+0x42b) [0x807745b]
13: /usr/bin/X(ProcMapWindow+0x69) [0x808b989]
14: /usr/bin/X(Dispatch+0x34f) [0x808c20f]
15: /usr/bin/X(main+0x47d) [0x8071c8d]
16: /lib/libc.so.6(__libc_start_main+0xe5) [0xb7b0f5c5]
17: /usr/bin/X(FontFileCompleteXLFD+0x209) [0x8071071]
Fatal server error:
Caught signal 11. Server aborting
(II) KYE EasyTrack Optical U+P: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
and this is my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jul 17 18:39:19 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
# InputDevice "Keyboard0" "CoreKeyboard"
# InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
# RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
#Section "InputDevice"
# # generated from default
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/psaux"
# Option "Emulate3Buttons" "no"
# Option "ZAxisMapping" "4 5 6 7"
#EndSection
#Section "InputDevice"
# # generated from default
# Identifier "Keyboard0"
# Driver "keyboard"
#EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "ConnectedMonitor" "DFP"
Option "TripleBuffer" "True"
Option "BackingStore" "True"
Option "DamageEvents" "True"
Option "NvAGP" "1"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
Option "UseEvents" "false"
Option "PixmapCacheSize" "70000"
Option "OnDemandVBlankInterrupts" "true"
Option "AllowSHMPixmaps" "0"
Option "DisableGLXRootClipping"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Thank you in advance
Chrysalis wrote:
Unplug your joystick for now and get rid of type1.
Try removing backingstone.
If still no go then try nvidia-beta, you dont need any of those options with 180+, works out of the box with kde4 now.
Thank you, it works now . I stil don't know if it is because of my old xorg.conf, or because of my joystick (I will do some tests), but right now it works, at least I can open a kde session.
Again, thank you very much for your help
Last edited by serjor (2008-12-07 11:29:05)
Similar Messages
-
Xorg-server 1.6.3.901-1 and nouveau on 7600 Go = crash
Hi !
I updated this morning and now that xorg-server and libdrm (maybe the culprit ?) are up to date X won't start with nouveau
It works if I go back to nvidia.
What should I do ? Who should I contact ?
Thanks Bye !You're right Nephete but i didn't consider this post as a "help me compiling nouveau".
nv_accel_common.c: In function 'NVAccelInitContextSurfaces':
nv_accel_common.c:48: erreur: 'NV_10' undeclared (first use in this function)
nv_accel_common.c:48: erreur: (Each undeclared identifier is reported only once
nv_accel_common.c:48: erreur: for each function it appears in.)
make[2]: *** [nv_accel_common.lo] Erreur 1
make[2]: *** Attente des tâches non terminées....
mv -f .deps/nv_cursor.Tpo .deps/nv_cursor.Plo
make[2]: quittant le répertoire « /home/bruno/abs/xf86-video-nouveau/src/xf86-video-nouveau-20090612/src »
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le répertoire « /home/bruno/abs/xf86-video-nouveau/src/xf86-video-nouveau-20090612 »
make: *** [all] Erreur 2 -
Xorg-server 1.8.1.902-1, xf86-video-ati 6.13.0-1 and KMS
So, I've done a scheduled, regular system update a couple of hours ago. All went well but when I rebooted and started KDE after a while it crashed. And it did so many times before I figured out that if I turned Compositing off in KDE's System Settings it'd become stable.
I poked around for some more time since I love Compositing effects in KDE and with no options left decided to remove radeon.modeset=0 option from bootloader menu entry. Just to see what would happen. Before radeon.modeset=1 (or turned on by default) caused me big troubles. This is a Xpress 1250 IGP.
Now, it seems having KMS support disabled isn't an option if I want Compositing to work in KDE properly which is absolutely fine.
I'm now wondering what happened. Is it new X or radeon driver version? Is it new kernel version? All this software was upgraded today and I having a hard time trying to pinpoint what lead to the changes.
Any input would be highly appreciated.Laserpithium wrote:
This is a known bug of X server.
I have the same, and it is already listed in the bug report of xorg-server.
After that, how to handle it... Well, we just have to hope that KMS will remain usable the time they close this bug !
I don't care that much for KMS, really.
By the way did you notice a drop in 3D performance in KDE? Teeworlds are running lightning fast, though. It seems it's only KWin that's became slower, sometimes to a point of several seconds freeze. Also, it's very noticeable when using Flip Switch effect for window switching -
[solved]xorg server 1.6 and dbus (???)
hello everyone
first of all, i'm fairly new to arch, however, i do have experience with linux. i've been using gentoo for about 4 years and a few other distributions before that.
secondly, i'd like to apologize if this is the wrong place to post this, but i couldn't really find a place where it'd fit in.
today i've installed arch on my macbook (one of the late 2008 models) and so far, quite a few things work. there is, however, one thing i noticed as soon as i started dbus, keyboard events in xorg got repeated. to be more precise, if i hit the letter a, it would print an a on key press and another one on key release. i have xorg server 1.6.3.901-1.
did anyone else have a similar problem and/or knows how this can be fixed?
thanks in advance for anything that might help
edit: quite oddly, a reboot (which did not help previously) fixed it this time...
Last edited by MrDStar (2009-10-25 20:44:42)Thanks!
xf86-video-intel
xf86-input-synaptics
from testing is the solution - more or less .
testing disabled again:
# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
kdemod-core is up to date
kdemod-extragear is up to date
archlinuxfr is up to date
:: Starting full system upgrade...
warning: intel-dri: local (7.3-1) is newer than extra (7.2-2)
warning: libgl: local (7.3-1) is newer than extra (7.2-1)
warning: xf86-input-evdev: local (2.2.0-1) is newer than extra (2.1.2-1)
warning: xf86-input-synaptics: local (1.1.0-1) is newer than extra (1.0.0-1)
warning: xorg-server: local (1.6.0-1) is newer than extra (1.5.3-4)
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: intel-dri: requires libdrm>=2.4.4
:: libgl: requires libdrm>=2.4.5
Any ideas?
Last edited by Llama (2009-03-31 19:15:25) -
Xorg-server 1.6 and Intel GM965 video card[SOLVED]
Hi,
Because of gtk2/libxi upgrade issue / keyboard layout issue I had to upgrade to xorg-server 1.6 from testing. It won't configure: "Missing output drivers. Configuration failed". Any ideas?
Last edited by Llama (2009-04-02 05:21:07)Thanks!
xf86-video-intel
xf86-input-synaptics
from testing is the solution - more or less .
testing disabled again:
# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
kdemod-core is up to date
kdemod-extragear is up to date
archlinuxfr is up to date
:: Starting full system upgrade...
warning: intel-dri: local (7.3-1) is newer than extra (7.2-2)
warning: libgl: local (7.3-1) is newer than extra (7.2-1)
warning: xf86-input-evdev: local (2.2.0-1) is newer than extra (2.1.2-1)
warning: xf86-input-synaptics: local (1.1.0-1) is newer than extra (1.0.0-1)
warning: xorg-server: local (1.6.0-1) is newer than extra (1.5.3-4)
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: intel-dri: requires libdrm>=2.4.4
:: libgl: requires libdrm>=2.4.5
Any ideas?
Last edited by Llama (2009-03-31 19:15:25) -
[Solved] xorg server & keyboard conf error messages after upgrade
I ran my daily upgrade (today was big, from FF to the kernel to xorg) and I was not able to login on GDM afterwards.
It's weird. The X server will start, and so will the GDM login screen. But entering the password will result in a GDM crash (I later found out that KDM and SLIM have the same issue; KDM not starting and SLIM refusing the keyboard input). So after starting an alternate console and trying to start x (startx), I have this error message:
"Th e XKEYBOARDMAP keymap compiler (xbcomp) reports:
Error: Cannot close "/tmp/server-0.xkm" properly (not enough space?)
Output file "/tmp/server-0.xkm" removed
Errors from xkbcomp are not fatal to the X server
XKB: Failed to compile keymap
Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
Fatal server error:
Failed to activate core devices "
I have been fiddling with the keyboard config on xorg.conf but I'm not sure I'm getting anywhere. Also, I downgraded the xorg-server and xkeyboard config packages just to be sure.
Any clue?
Thanks!
Last edited by southerncross (2012-07-24 15:46:38)Well... seems I didn't have any answer on this. I fiddled a bit more but I have to say that I really came to wits' end at this stage. A couple of observations though:
* I don't really understand this notion of a keyboard issue. My keyboard and its layout work properly but I will not be able to login regardless of login through GDM, KDM or Slim. Yet it's worth noting that in the case of GDM and SLIM the X server starts; I see the graphical interface, I click, etc. but when I type the trouble starts.
* I tried to check my xsessions-errors file. The file is really big under a frame buffer, and it wasn't clear to me, but I found strange that the log was reporting all sorts of attempts to start KDE. I don't exactly know what's going on.
If anybody has any clue, let me know... It's becoming very frustrating.
Thanks! -
Nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault
After today's upgrade, X fails to start with segmentation fault. When I downgraded nvidia/nvidia-utils to 185.18.36-2, xorg-server to 1.6.3.901-1 and related xf86-input-*, it starts to work. Interestingly, neither combination of nvidia/nvidia-utils to 185.18.36-2 with xorg-server 1.7.1-1, nor nvidia/nvidia-utils 190.42-1 with xorg-server to 1.6.3.901-1 works. After downgrading and playing it a little bit, I lost my original crash logs.
I guess I should post the problem here to see if anyone is seeing the same problem, before going back upgrading and hitting the bug again. Of course, if you are interested in my Xorg.0.log, I can produce it again.
And by the way, I'm using arch64 on a lenovo t61p with nVidia Quadro FX 570M. I guess the problem is new, and I don't have any luck with google, yet.I just encountered this error with nvidia-173xx, I guess the only solution is to manually search for and install the
older xorg packages? And wait for nvidia to possibly* add support for the new xorg?
X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686
Current Operating System: Linux Thorin 2.6.31-ARCH #1 SMP PREEMPT Fri Oct 23 11:12:58 CEST 2009 i686
Kernel command line: root=/dev/disk/by-uuid/3902f419-5299-4a4e-8cc7-f31d3d7702a5 ro vga=773
Build Date: 25 October 2009 08:20:56PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 1 13:59:11 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81e5f40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 8
(--) PCI:*(0:1:0:0) 10de:00c8:1558:0900 nVidia Corporation NV41.8 [GeForce Go 6800] rev 162, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xb1000000/16777216
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.20 Thu Jun 25 19:49:59 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
dlopen: /usr/lib/xorg/modules/drivers/nvidia_drv.so: undefined symbol: resVgaShared
(EE) Failed to load /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) UnloadModule: "nvidia"
(EE) Failed to load module "nvidia" (loader failed, 7)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Edit: found my packages at http://www.schlunix.org/archlinux/extra/os/i686/ and did a downgrade,
anubis@Thorin ~/ $ sudo pacman -U /var/cache/pacman/pkg/xorg-server-1.6.3.901-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xorg-server-utils-7.4-7-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-evdev-2.2.5-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-keyboard-1.3.2-2-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-mouse-1.4.0-2-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-synaptics-1.1.3-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-video-nv-2.1.14-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-video-vesa-2.2.0-1-i686.pkg.tar.gz
Last edited by 1LordAnubis (2009-11-01 23:07:34) -
Problem when downgrading xorg-server
I'm using xorg-server from testing, but that breaks opengl effects on kdemod4 (and kde4) http://bugs.archlinux.org/task/11351?project=0
Actually, it seems it's libdrm, but that's not the point. I tried downgrading to extra with something like:
sudo pacman -Sf extra/xorg-server extra/xf86-video-intel extra/libdrm
And it works fine. KDM starts up but when I try to login to KDE4, it just crashes when the splash screen appears. Anyone has a clue how may I debug this? Is it something I forgot to downgrade?
ThanksI forced the upgrade after I checked with 'pacman -Qo offending-package' and no package was shown as owner of these two files. Hopefully it will work after a restart.
EDIT:
CRAP. I only realized AMD has dropped support for my card after I upgraded to xorg-server-1.6 and catalyst-9.4.
Fortunately I still had the old xorg packages in cache. Since the radeon driver doesn't support powerplay this means I will have to stop at catalyst-9.3 and xorg-server-1.5. I wonder how this will work out with future kernel upgrades...
Last edited by signor_rossi (2009-04-12 20:22:48) -
Xorg-server 1.6 - black screen with mouse cursor
Hi
First of all: I'm really new to Arch, so maybe there is a real easy fix for this problem
Since upgrading to xorg-server 1.6 (and today to 1.6.1) I'm not able to get a running Desktop Environment.
Usually I am using gnome with compiz-fusion on my Geforce 4 (nvidia-96xx 96.43.11-4 driver).
When I boot my machine i see gdm and I am able to login. I can hear my login sound but I only get a black screen with a mouse cursor.
I added a new test user to my system without compiz and get the same.
I tried my old xorg.conf from 1.5, generated a new one with X -configure and tried without xorg.conf but everytime the same
Actually I'm not sure if the xorg update is responsible for this, because i did not watch the upgrade-process....
I googled this problem and was searching similar things in this froum, but I wasn't able to find something
Here are some files
xorg.conf (i know there are some bullshit things in it, but it was workig )
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/local/"
FontPath "/usr/lib/X11/fonts/misc/"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
FontPath "/usr/lib/X11/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2" # PS/2 Mouse
Option "Device" "/dev/psaux"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Eizo"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 24.8-80
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-75
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "GeForce4"
# Driver "nv"
Driver "nvidia"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "GeForce4"
Monitor "Eizo"
DefaultDepth 24
Option "AddARGBGLXVisuals" "true"
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
Xorg.0.log
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux delirium 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 23:20:32 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Eizo"
(**) | |-->Device "GeForce4"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/lib/X11/fonts/local/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@3:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xe5000000/16777216, 0xd0000000/134217728, 0xd8000000/524288, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.11 Mon Feb 23 15:43:14 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:32:04 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 03@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce4 Ti 4200 at PCI:3:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.25.00.34.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce4 Ti 4200 at PCI:3:0:0:
(--) NVIDIA(0): EIZO L578 (DFP-0)
(--) NVIDIA(0): EIZO L578 (DFP-0): 165.0 MHz maximum pixel clock
(--) NVIDIA(0): EIZO L578 (DFP-0): External Single Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024"
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): "800x600"
(II) NVIDIA(0): "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event6"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device saa7134 IR (LifeView FlyVIDEO30
(**) saa7134 IR (LifeView FlyVIDEO30: always reports core events
(**) saa7134 IR (LifeView FlyVIDEO30: Device: "/dev/input/event5"
(II) saa7134 IR (LifeView FlyVIDEO30: Found keys
(II) saa7134 IR (LifeView FlyVIDEO30: Configuring as keyboard
(II) XINPUT: Adding extended input device "saa7134 IR (LifeView FlyVIDEO30" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Last edited by MueLLe (2009-04-15 21:35:42)I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?
-
The Oracle MapViewer brings the WebLogic Managed Server to crash
Problem Description: The Oracle MapViewer brings the WebLogic Managed Server to crash, when we call a GetMap-Request with wrong Coordinates.
This was found out for the SRS=EPSG:25833. Example:
http://igdb-qm-svra1.blva.bayern.de:8080/mapviewer/wms?
REQUEST=getMap&
Version=1.1.1&
LAYERS=&
FORMAT=image/png&
TRANSPARENT=false&
STYLES=&
Datasource=igvert_alkis_wms&
basemap=AT_WMS_TN-KOMPLETT&
SRS=EPSG:25833&
BBOX=3.32358690717E7,5529425.0143,3.32369088846E7,5530464.8272&
WIDTH=500&
HEIGHT=500&
With the Enterprise Manager was also evaluated during and after a crash of Server the SQL-Statements.
If the SQL statements executed on the database itself, it takes a few seconds after a correct answer returns.
I know that have the look for the EPSG coordinate as follows:
BBOX=235869.071700,5529425.014300,236908.884600,5530464.827200&
My question therefore: Why are these coordinates by the Oracle MapViewer approved and not caught? An Request with incorrect
coordinates goes into a StuckThreads and then the ManagedServer crashed.
In the appendix you will find the evaluation of the Enterprise Manager.
I have tested the request with two different versions of Oracle MapViewer (Ver11_1_1_5_B110527 and Ver11_B100426). In both the same problem occurs on.
I have also filed an SR.
Best Regards
KerstinHi,
Can you confirm that you're trying to setup a managed server on another machine using the pack/unpack commands ?
You might to want to take a look at that post.
Clustering of 2 Physical server
Hope that helps !
Regards -
Frozen screen with xorg-server 1.16 and ati driver
Hi,
after upgrading xorg-server to 1.16 (yes, I've read the news), the screen is somehow frozen: I can move the mouse but when I e.g. want to open a gui/window, nothing happens. Only switching from tty1 to another tty and back to tty1 updates the screen.
I'm using driver. xf86-video-ati on a Mobility Radeon HD 3650.
.local/share/xorg/Xorg.0.log:
[ 57.275]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 57.275] X Protocol Version 11, Revision 0
[ 57.275] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 57.275] Current Operating System: Linux bra 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[ 57.275] Kernel command line: BOOT_IMAGE=../vmlinuz-linux cryptdevice=/dev/sda2:main root=/dev/mapper/main-root ro locale=de_DE.UTF-8 initrd=../initramfs-linux.img
[ 57.275] Build Date: 31 July 2014 11:53:19AM
[ 57.275]
[ 57.275] Current version of pixman: 0.32.6
[ 57.275] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 57.275] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 57.275] (==) Log file: "/home/hel/.local/share/xorg/Xorg.0.log", Time: Sat Aug 30 19:43:24 2014
[ 57.282] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 57.282] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 57.295] (==) No Layout section. Using the first Screen section.
[ 57.295] (==) No screen section available. Using defaults.
[ 57.295] (**) |-->Screen "Default Screen Section" (0)
[ 57.295] (**) | |-->Monitor "<default monitor>"
[ 57.297] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 57.297] (**) | |-->Device "My Graphics Card"
[ 57.297] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 57.297] (==) Automatically adding devices
[ 57.297] (==) Automatically enabling devices
[ 57.297] (==) Automatically adding GPU devices
[ 57.360] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 57.360] Entry deleted from font path.
[ 57.361] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 57.361] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 57.361] Entry deleted from font path.
[ 57.361] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 57.361] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 57.361] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 57.361] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 57.362] (II) Loader magic: 0x818d80
[ 57.362] (II) Module ABI versions:
[ 57.362] X.Org ANSI C Emulation: 0.4
[ 57.362] X.Org Video Driver: 18.0
[ 57.362] X.Org XInput driver : 21.0
[ 57.362] X.Org Server Extension : 8.0
[ 57.459] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 57.459] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 57.504] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 57.506] (--) PCI:*(0:1:0:0) 1002:9591:17aa:2117 rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 57.506] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 57.506] (II) LoadModule: "glx"
[ 57.509] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 57.608] (II) Module glx: vendor="X.Org Foundation"
[ 57.608] compiled for 1.16.0, module version = 1.0.0
[ 57.608] ABI class: X.Org Server Extension, version 8.0
[ 57.608] (==) AIGLX enabled
[ 57.608] (==) Matched ati as autoconfigured driver 0
[ 57.608] (==) Matched ati as autoconfigured driver 1
[ 57.608] (==) Matched modesetting as autoconfigured driver 2
[ 57.608] (==) Matched fbdev as autoconfigured driver 3
[ 57.608] (==) Matched vesa as autoconfigured driver 4
[ 57.608] (==) Assigned the driver to the xf86ConfigLayout
[ 57.608] (II) LoadModule: "ati"
[ 57.608] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 57.612] (II) Module ati: vendor="X.Org Foundation"
[ 57.612] compiled for 1.16.0, module version = 7.4.0
[ 57.612] Module class: X.Org Video Driver
[ 57.612] ABI class: X.Org Video Driver, version 18.0
[ 57.612] (II) LoadModule: "radeon"
[ 57.612] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 57.626] (II) Module radeon: vendor="X.Org Foundation"
[ 57.626] compiled for 1.16.0, module version = 7.4.0
[ 57.626] Module class: X.Org Video Driver
[ 57.626] ABI class: X.Org Video Driver, version 18.0
[ 57.626] (II) LoadModule: "modesetting"
[ 57.627] (WW) Warning, couldn't open module modesetting
[ 57.627] (II) UnloadModule: "modesetting"
[ 57.627] (II) Unloading modesetting
[ 57.627] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 57.627] (II) LoadModule: "fbdev"
[ 57.627] (WW) Warning, couldn't open module fbdev
[ 57.627] (II) UnloadModule: "fbdev"
[ 57.627] (II) Unloading fbdev
[ 57.627] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 57.627] (II) LoadModule: "vesa"
[ 57.627] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 57.632] (II) Module vesa: vendor="X.Org Foundation"
[ 57.632] compiled for 1.16.0, module version = 2.3.2
[ 57.632] Module class: X.Org Video Driver
[ 57.632] ABI class: X.Org Video Driver, version 18.0
[ 57.632] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 57.636] (II) VESA: driver for VESA chipsets: vesa
[ 57.636] (++) using VT number 1
[ 57.637] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 57.637] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 57.642] (II) [KMS] Kernel modesetting enabled.
[ 57.642] (WW) Falling back to old probe method for vesa
[ 57.642] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 57.642] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 57.642] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 57.642] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 57.642] (==) RADEON(0): Default visual is TrueColor
[ 57.642] (**) RADEON(0): Option "EXAVSync" "on"
[ 57.642] (**) RADEON(0): Option "EXAPixmaps" "on"
[ 57.642] (==) RADEON(0): RGB weight 888
[ 57.642] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 57.642] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 3650" (ChipID = 0x9591)
[ 57.642] (II) Loading sub module "dri2"
[ 57.642] (II) LoadModule: "dri2"
[ 57.642] (II) Module "dri2" already built-in
[ 57.642] (II) Loading sub module "exa"
[ 57.642] (II) LoadModule: "exa"
[ 57.642] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 57.653] (II) Module exa: vendor="X.Org Foundation"
[ 57.653] compiled for 1.16.0, module version = 2.6.0
[ 57.653] ABI class: X.Org Video Driver, version 18.0
[ 57.653] (II) RADEON(0): KMS Color Tiling: enabled
[ 57.653] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 57.653] (II) RADEON(0): KMS Pageflipping: enabled
[ 57.653] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 57.683] (II) RADEON(0): Output DVI-0 has no monitor section
[ 57.683] (II) RADEON(0): Output LVDS has no monitor section
[ 57.696] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 57.717] (II) RADEON(0): Output VGA-0 has no monitor section
[ 57.747] (II) RADEON(0): EDID for output DVI-0
[ 57.747] (II) RADEON(0): Manufacturer: SAM Model: 3f0 Serial#: 1413755442
[ 57.747] (II) RADEON(0): Year: 2008 Week: 4
[ 57.747] (II) RADEON(0): EDID Version: 1.3
[ 57.747] (II) RADEON(0): Digital Display Input
[ 57.747] (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 57.747] (II) RADEON(0): Gamma: 2.20
[ 57.747] (II) RADEON(0): DPMS capabilities: Off
[ 57.747] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 57.747] (II) RADEON(0): First detailed timing is preferred mode
[ 57.747] (II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 57.747] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 57.747] (II) RADEON(0): Supported established timings:
[ 57.747] (II) RADEON(0): 720x400@70Hz
[ 57.747] (II) RADEON(0): 640x480@60Hz
[ 57.747] (II) RADEON(0): 640x480@67Hz
[ 57.747] (II) RADEON(0): 640x480@72Hz
[ 57.747] (II) RADEON(0): 640x480@75Hz
[ 57.747] (II) RADEON(0): 800x600@56Hz
[ 57.747] (II) RADEON(0): 800x600@60Hz
[ 57.747] (II) RADEON(0): 800x600@72Hz
[ 57.747] (II) RADEON(0): 800x600@75Hz
[ 57.747] (II) RADEON(0): 832x624@75Hz
[ 57.747] (II) RADEON(0): 1024x768@60Hz
[ 57.748] (II) RADEON(0): 1024x768@70Hz
[ 57.748] (II) RADEON(0): 1024x768@75Hz
[ 57.748] (II) RADEON(0): 1280x1024@75Hz
[ 57.748] (II) RADEON(0): 1152x864@75Hz
[ 57.748] (II) RADEON(0): Manufacturer's mask: 0
[ 57.748] (II) RADEON(0): Supported standard timings:
[ 57.748] (II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 57.748] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 57.748] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 57.748] (II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 57.748] (II) RADEON(0): Supported detailed timing:
[ 57.748] (II) RADEON(0): clock: 146.2 MHz Image Size: 433 x 271 mm
[ 57.748] (II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 57.748] (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 57.748] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 155 MHz
[ 57.748] (II) RADEON(0): Monitor name: SyncMaster
[ 57.748] (II) RADEON(0): Serial No: H1AK500000
[ 57.748] (II) RADEON(0): EDID (in hex):
[ 57.748] (II) RADEON(0): 00ffffffffffff004c2df00332324454
[ 57.748] (II) RADEON(0): 04120103802f1e782aee91a3544c9926
[ 57.748] (II) RADEON(0): 0f5054bfef80b30081808140714f0101
[ 57.748] (II) RADEON(0): 01010101010121399030621a274068b0
[ 57.748] (II) RADEON(0): 3600b10f1100001c000000fd00384b1e
[ 57.748] (II) RADEON(0): 510f000a202020202020000000fc0053
[ 57.748] (II) RADEON(0): 796e634d61737465720a2020000000ff
[ 57.748] (II) RADEON(0): 004831414b3530303030300a202000b4
[ 57.748] (II) RADEON(0): Printing probed modes for output DVI-0
[ 57.748] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 57.748] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 57.748] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 57.748] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 57.748] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 57.748] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 57.748] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 57.748] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 57.748] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 57.748] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 57.748] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 57.748] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 57.748] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 57.748] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 57.748] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 57.748] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 57.748] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 57.748] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 57.748] (II) RADEON(0): EDID for output LVDS
[ 57.748] (II) RADEON(0): Manufacturer: IBM Model: 2887 Serial#: 0
[ 57.748] (II) RADEON(0): Year: 2005 Week: 0
[ 57.748] (II) RADEON(0): EDID Version: 1.3
[ 57.748] (II) RADEON(0): Digital Display Input
[ 57.748] (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 57.748] (II) RADEON(0): Gamma: 2.20
[ 57.748] (II) RADEON(0): No DPMS capabilities specified
[ 57.748] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 57.748] (II) RADEON(0): First detailed timing is preferred mode
[ 57.748] (II) RADEON(0): redX: 0.596 redY: 0.347 greenX: 0.335 greenY: 0.543
[ 57.748] (II) RADEON(0): blueX: 0.158 blueY: 0.143 whiteX: 0.313 whiteY: 0.329
[ 57.748] (II) RADEON(0): Manufacturer's mask: 0
[ 57.748] (II) RADEON(0): Supported detailed timing:
[ 57.748] (II) RADEON(0): clock: 120.6 MHz Image Size: 331 x 207 mm
[ 57.748] (II) RADEON(0): h_active: 1680 h_sync: 1712 h_sync_end 1760 h_blank_end 1888 h_border: 0
[ 57.748] (II) RADEON(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
[ 57.748] (II) RADEON(0): Supported detailed timing:
[ 57.748] (II) RADEON(0): clock: 100.5 MHz Image Size: 331 x 207 mm
[ 57.748] (II) RADEON(0): h_active: 1680 h_sync: 1712 h_sync_end 1760 h_blank_end 1888 h_border: 0
[ 57.748] (II) RADEON(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
[ 57.748] (II) RADEON(0): Unknown vendor-specific block f
[ 57.748] (II) RADEON(0): LP154W02-TL06
[ 57.748] (II) RADEON(0): EDID (in hex):
[ 57.748] (II) RADEON(0): 00ffffffffffff00244d872800000000
[ 57.748] (II) RADEON(0): 000f0103802115780abca59858558b28
[ 57.748] (II) RADEON(0): 24505400000001010101010101010101
[ 57.748] (II) RADEON(0): 0101010101011c2f90d0601a0f402030
[ 57.748] (II) RADEON(0): 13004bcf10000019452790d0601a0f40
[ 57.748] (II) RADEON(0): 203013004bcf100000190000000f00b3
[ 57.748] (II) RADEON(0): 0a32b30a28140100320c0000000000fe
[ 57.748] (II) RADEON(0): 004c503135345730322d544c303600bf
[ 57.748] (II) RADEON(0): Printing probed modes for output LVDS
[ 57.748] (II) RADEON(0): Modeline "1680x1050"x60.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 57.748] (II) RADEON(0): Modeline "1680x1050"x50.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 57.748] (II) RADEON(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[ 57.748] (II) RADEON(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[ 57.748] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 57.748] (II) RADEON(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
[ 57.748] (II) RADEON(0): Modeline "1280x854"x59.9 89.25 1280 1352 1480 1680 854 857 867 887 -hsync +vsync (53.1 kHz)
[ 57.748] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 57.748] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 57.748] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 57.748] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 57.748] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 57.748] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 57.749] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 57.749] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 57.760] (II) RADEON(0): EDID for output DisplayPort-0
[ 57.780] (II) RADEON(0): EDID for output VGA-0
[ 57.780] (II) RADEON(0): Output DVI-0 connected
[ 57.780] (II) RADEON(0): Output LVDS connected
[ 57.780] (II) RADEON(0): Output DisplayPort-0 disconnected
[ 57.780] (II) RADEON(0): Output VGA-0 disconnected
[ 57.780] (II) RADEON(0): Using exact sizes for initial modes
[ 57.780] (II) RADEON(0): Output DVI-0 using initial mode 1680x1050
[ 57.780] (II) RADEON(0): Output LVDS using initial mode 1680x1050
[ 57.780] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 57.780] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:f8ca000
[ 57.780] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 57.780] (==) RADEON(0): DPI set to (96, 96)
[ 57.780] (II) Loading sub module "fb"
[ 57.780] (II) LoadModule: "fb"
[ 57.780] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 57.815] (II) Module fb: vendor="X.Org Foundation"
[ 57.815] compiled for 1.16.0, module version = 1.0.0
[ 57.815] ABI class: X.Org ANSI C Emulation, version 0.4
[ 57.815] (II) Loading sub module "ramdac"
[ 57.815] (II) LoadModule: "ramdac"
[ 57.815] (II) Module "ramdac" already built-in
[ 57.815] (II) UnloadModule: "vesa"
[ 57.816] (II) Unloading vesa
[ 57.816] (--) Depth 24 pixmap format is 32 bpp
[ 57.817] (II) RADEON(0): [DRI2] Setup complete
[ 57.817] (II) RADEON(0): [DRI2] DRI driver: r600
[ 57.817] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 57.817] (II) RADEON(0): Front buffer size: 7128K
[ 57.817] (II) RADEON(0): VRAM usage limit set to 222840K
[ 57.829] (==) RADEON(0): Backing store enabled
[ 57.829] (II) RADEON(0): Direct rendering enabled
[ 57.829] (II) RADEON(0): EXA VSync enabled
[ 57.829] (II) EXA(0): Driver allocated offscreen pixmaps
[ 57.829] (II) EXA(0): Driver registered support for the following operations:
[ 57.829] (II) Solid
[ 57.829] (II) Copy
[ 57.829] (II) Composite (RENDER acceleration)
[ 57.829] (II) UploadToScreen
[ 57.829] (II) DownloadFromScreen
[ 57.829] (II) RADEON(0): Acceleration enabled
[ 57.829] (==) RADEON(0): DPMS enabled
[ 57.829] (==) RADEON(0): Silken mouse enabled
[ 57.830] (II) RADEON(0): Set up textured video
[ 57.830] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 57.830] (II) RADEON(0): [XvMC] Extension initialized.
[ 57.830] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 57.841] (WW) RADEON(0): Option "AccelDFS" is not used
[ 57.841] (--) RandR disabled
[ 58.103] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 58.103] (II) AIGLX: enabled GLX_ARB_create_context
[ 58.103] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 58.103] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 58.103] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 58.103] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 58.103] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 58.103] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 58.103] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 58.104] (II) AIGLX: Loaded and initialized r600
[ 58.104] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 58.940] (II) RADEON(0): Setting screen physical size to 444 x 277
[ 59.040] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 59.040] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 59.040] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 59.040] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 59.040] (II) LoadModule: "evdev"
[ 59.040] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 59.053] (II) Module evdev: vendor="X.Org Foundation"
[ 59.053] compiled for 1.16.0, module version = 2.9.0
[ 59.053] Module class: X.Org XInput Driver
[ 59.053] ABI class: X.Org XInput driver, version 21.0
[ 59.054] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 11 paused 0
[ 59.054] (II) Using input driver 'evdev' for 'Power Button'
[ 59.054] (**) Power Button: always reports core events
[ 59.054] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 59.054] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 59.054] (--) evdev: Power Button: Found keys
[ 59.054] (II) evdev: Power Button: Configuring as keyboard
[ 59.054] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[ 59.054] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 59.054] (**) Option "xkb_rules" "evdev"
[ 59.054] (**) Option "xkb_model" "pc104"
[ 59.054] (**) Option "xkb_layout" "us"
[ 59.054] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 59.105] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 59.105] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 59.105] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 59.105] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 59.107] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 12 paused 0
[ 59.107] (II) Using input driver 'evdev' for 'Video Bus'
[ 59.107] (**) Video Bus: always reports core events
[ 59.107] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 59.107] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 59.107] (--) evdev: Video Bus: Found keys
[ 59.107] (II) evdev: Video Bus: Configuring as keyboard
[ 59.107] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input8/event7"
[ 59.107] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 59.107] (**) Option "xkb_rules" "evdev"
[ 59.107] (**) Option "xkb_model" "pc104"
[ 59.107] (**) Option "xkb_layout" "us"
[ 59.107] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 59.107] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 59.108] (II) No input driver specified, ignoring this device.
[ 59.108] (II) This device may have been added with another device file.
[ 59.108] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 59.108] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 59.108] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 59.108] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 59.108] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 13 paused 0
[ 59.108] (II) Using input driver 'evdev' for 'Sleep Button'
[ 59.108] (**) Sleep Button: always reports core events
[ 59.108] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[ 59.108] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 59.108] (--) evdev: Sleep Button: Found keys
[ 59.108] (II) evdev: Sleep Button: Configuring as keyboard
[ 59.108] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event5"
[ 59.108] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 59.108] (**) Option "xkb_rules" "evdev"
[ 59.108] (**) Option "xkb_model" "pc104"
[ 59.108] (**) Option "xkb_layout" "us"
[ 59.108] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 59.109] (II) config/udev: Adding input device Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint (/dev/input/event1)
[ 59.109] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "evdev keyboard catchall"
[ 59.109] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "evdev keyboard catchall"
[ 59.109] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "Keyboard Defaults"
[ 59.109] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 59.110] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 14 paused 0
[ 59.110] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint'
[ 59.110] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: always reports core events
[ 59.110] (**) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Device: "/dev/input/event1"
[ 59.110] (--) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Vendor 0x17ef Product 0x6009
[ 59.110] (--) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Found keys
[ 59.110] (II) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Configuring as keyboard
[ 59.110] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5.2/7-5.2:1.0/0003:17EF:6009.0001/input/input2/event1"
[ 59.110] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint" (type: KEYBOARD, id 9)
[ 59.110] (**) Option "xkb_rules" "evdev"
[ 59.110] (**) Option "xkb_model" "pc104"
[ 59.110] (**) Option "xkb_layout" "us"
[ 59.110] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 59.110] (II) config/udev: Adding input device Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint (/dev/input/event2)
[ 59.110] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "evdev pointer catchall"
[ 59.110] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "evdev keyboard catchall"
[ 59.110] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "evdev pointer catchall"
[ 59.110] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "evdev keyboard catchall"
[ 59.110] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "Keyboard Defaults"
[ 59.110] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 59.111] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 15 paused 0
[ 59.111] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint'
[ 59.111] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: always reports core events
[ 59.111] (**) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Device: "/dev/input/event2"
[ 59.111] (--) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Vendor 0x17ef Product 0x6009
[ 59.111] (--) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Found 19 mouse buttons
[ 59.111] (--) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Found relative axes
[ 59.111] (--) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Found x and y relative axes
[ 59.111] (--) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Found keys
[ 59.111] (II) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Configuring as mouse
[ 59.111] (II) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Configuring as keyboard
[ 59.111] (**) Option "Emulate3Buttons" "false"
[ 59.111] (**) Option "EmulateWheel" "true"
[ 59.111] (**) Option "EmulateWheelButton" "2"
[ 59.111] (**) Option "YAxisMapping" "4 5"
[ 59.111] (**) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: YAxisMapping: buttons 4 and 5
[ 59.111] (**) Option "XAxisMapping" "6 7"
[ 59.111] (**) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: XAxisMapping: buttons 6 and 7
[ 59.111] (**) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 59.111] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5.2/7-5.2:1.1/0003:17EF:6009.0002/input/input3/event2"
[ 59.111] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint" (type: KEYBOARD, id 10)
[ 59.111] (**) Option "xkb_rules" "evdev"
[ 59.111] (**) Option "xkb_model" "pc104"
[ 59.111] (**) Option "xkb_layout" "us"
[ 59.111] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 59.111] (II) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: initialized for relative axes.
[ 59.112] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: (accel) keeping acceleration scheme 1
[ 59.112] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: (accel) acceleration profile 0
[ 59.112] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: (accel) acceleration factor: 2.000
[ 59.112] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: (accel) acceleration threshold: 4
[ 59.112] (II) config/udev: Adding input device Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint (/dev/input/js0)
[ 59.112] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "Keyboard Defaults"
[ 59.112] (II) No input driver specified, ignoring this device.
[ 59.112] (II) This device may have been added with another device file.
[ 59.112] (II) config/udev: Adding input device Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint (/dev/input/mouse0)
[ 59.112] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "Keyboard Defaults"
[ 59.112] (II) No input driver specified, ignoring this device.
[ 59.112] (II) This device may have been added with another device file.
[ 59.113] (II) config/udev: Adding input device Logitech USB Gaming Mouse (/dev/input/event3)
[ 59.113] (**) Logitech USB Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 59.113] (**) Logitech USB Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 59.157] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 16 paused 0
[ 59.157] (II) Using input driver 'evdev' for 'Logitech USB Gaming Mouse'
[ 59.157] (**) Logitech USB Gaming Mouse: always reports core events
[ 59.157] (**) evdev: Logitech USB Gaming Mouse: Device: "/dev/input/event3"
[ 59.157] (--) evdev: Logitech USB Gaming Mouse: Vendor 0x46d Product 0xc042
[ 59.157] (--) evdev: Logitech USB Gaming Mouse: Found 20 mouse buttons
[ 59.157] (--) evdev: Logitech USB Gaming Mouse: Found scroll wheel(s)
[ 59.157] (--) evdev: Logitech USB Gaming Mouse: Found relative axes
[ 59.157] (--) evdev: Logitech USB Gaming Mouse: Found x and y relative axes
[ 59.157] (II) evdev: Logitech USB Gaming Mouse: Configuring as mouse
[ 59.157] (II) evdev: Logitech USB Gaming Mouse: Adding scrollwheel support
[ 59.157] (**) evdev: Logitech USB Gaming Mouse: YAxisMapping: buttons 4 and 5
[ 59.157] (**) evdev: Logitech USB Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 59.157] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5.3/7-5.3:1.0/0003:046D:C042.0003/input/input4/event3"
[ 59.157] (II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE, id 11)
[ 59.157] (II) evdev: Logitech USB Gaming Mouse: initialized for relative axes.
[ 59.158] (**) Logitech USB Gaming Mouse: (accel) keeping acceleration scheme 1
[ 59.158] (**) Logitech USB Gaming Mouse: (accel) acceleration profile 0
[ 59.158] (**) Logitech USB Gaming Mouse: (accel) acceleration factor: 2.000
[ 59.158] (**) Logitech USB Gaming Mouse: (accel) acceleration threshold: 4
[ 59.158] (II) config/udev: Adding input device Logitech USB Gaming Mouse (/dev/input/mouse1)
[ 59.158] (II) No input driver specified, ignoring this device.
[ 59.158] (II) This device may have been added with another device file.
[ 59.158] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 59.158] (II) No input driver specified, ignoring this device.
[ 59.158] (II) This device may have been added with another device file.
[ 59.158] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[ 59.159] (II) No input driver specified, ignoring this device.
[ 59.159] (II) This device may have been added with another device file.
[ 59.159] (II) config/udev: Adding input device HDA Intel Dock Mic (/dev/input/event11)
[ 59.159] (II) No input driver specified, ignoring this device.
[ 59.159] (II) This device may have been added with another device file.
[ 59.159] (II) config/udev: Adding input device HDA Intel Dock Headphone (/dev/input/event12)
[ 59.159] (II) No input driver specified, ignoring this device.
[ 59.159] (II) This device may have been added with another device file.
[ 59.159] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
[ 59.159] (II) No input driver specified, ignoring this device.
[ 59.159] (II) This device may have been added with another device file.
[ 59.160] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 59.160] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 59.160] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 59.160] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 59.160] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 17 paused 0
[ 59.160] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 59.160] (**) AT Translated Set 2 keyboard: always reports core events
[ 59.160] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 59.160] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 59.160] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 59.160] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 59.160] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 59.160] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 59.160] (**) Option "xkb_rules" "evdev"
[ 59.160] (**) Option "xkb_model" "pc104"
[ 59.160] (**) Option "xkb_layout" "us"
[ 59.160] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 59.161] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 59.161] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 59.161] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 59.161] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 59.161] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 59.161] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 18 paused 0
[ 59.161] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 59.161] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 59.161] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event14"
[ 59.161] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 59.161] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 59.161] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[ 59.161] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 59.161] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 59.161] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 59.161] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 59.161] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 59.161] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event14"
[ 59.161] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 59.162] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 59.162] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 59.162] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 59.162] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 59.162] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 59.162] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 59.162] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 59.162] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[ 59.162] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 59.162] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 59.162] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 59.207] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 19 paused 0
[ 59.207] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 59.207] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 59.207] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
[ 59.207] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 59.207] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 59.207] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 59.207] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 59.207] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 59.207] (**) Option "Emulate3Buttons" "false"
[ 59.207] (**) Option "EmulateWheel" "true"
[ 59.207] (**) Option "EmulateWheelButton" "2"
[ 59.207] (**) Option "YAxisMapping" "4 5"
[ 59.207] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 59.207] (**) Option "XAxisMapping" "6 7"
[ 59.207] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 59.207] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 59.207] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input16/event15"
[ 59.207] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[ 59.207] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 59.207] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 59.208] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 59.208] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 59.208] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 59.208] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 59.208] (II) No input driver specified, ignoring this device.
[ 59.208] (II) This device may have been added with another device file.
[ 59.208] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event8)
[ 59.208] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 59.208] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 59.208] (**) ThinkPad Extra Buttons: Applying InputClass "Keyboard Defaults"
[ 59.209] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 20 paused 0
[ 59.209] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 59.209] (**) ThinkPad Extra Buttons: always reports core events
[ 59.209] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event8"
[ 59.209] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 59.209] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 59.209] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 59.209] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event8"
[ 59.209] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 15)
[ 59.209] (**) Option "xkb_rules" "evdev"
[ 59.209] (**) Option "xkb_model" "pc104"
[ 59.209] (**) Option "xkb_layout" "us"
[ 59.209] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 59.497] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 59.497] (II) RADEON(0): Printing DDC gathered Modelines:
[ 59.497] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 59.497] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 59.568] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 59.568] (II) RADEON(0): Printing DDC gathered Modelines:
[ 59.568] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 59.568] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 59.941] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 59.941] (II) RADEON(0): Printing DDC gathered Modelines:
[ 59.941] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 59.941] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 60.027] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 60.027] (II) RADEON(0): Printing DDC gathered Modelines:
[ 60.027] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 60.027] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 60.099] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 60.099] (II) RADEON(0): Printing DDC gathered Modelines:
[ 60.099] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 60.099] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 61.044] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 61.044] (II) RADEON(0): Printing DDC gathered Modelines:
[ 61.044] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 61.044] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 61.112] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 61.112] (II) RADEON(0): Printing DDC gathered Modelines:
[ 61.112] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 61.112] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 62.930] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 62.930] (II) RADEON(0): Printing DDC gathered Modelines:
[ 62.930] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 62.930] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 89.683] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 89.730] (II) systemd-logind: got pause for 226:0
[ 89.730] (II) systemd-logind: got pause for 13:70
[ 89.730] (II) systemd-logind: got pause for 13:71
[ 89.730] (II) systemd-logind: got pause for 13:69
[ 89.730] (II) systemd-logind: got pause for 13:65
[ 89.730] (II) systemd-logind: got pause for 13:66
[ 89.730] (II) systemd-logind: got pause for 13:67
[ 89.730] (II) systemd-logind: got pause for 13:64
[ 89.730] (II) systemd-logind: got pause for 13:78
[ 89.730] (II) systemd-logind: got pause for 13:79
[ 89.730] (II) systemd-logind: got pause for 13:72
[ 90.518] (II) systemd-logind: got resume for 226:0
[ 90.518] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 90.551] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 90.551] (II) RADEON(0): Printing DDC gathered Modelines:
[ 90.551] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 90.551] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 90.591] (II) systemd-logind: got resume for 13:70
[ 90.591] (II) systemd-logind: got resume for 13:71
[ 90.592] (II) systemd-logind: got resume for 13:69
[ 90.592] (II) systemd-logind: got resume for 13:65
[ 90.592] (II) systemd-logind: got resume for 13:66
[ 90.603] (II) systemd-logind: got resume for 13:67
[ 90.616] (II) systemd-logind: got resume for 13:64
[ 90.620] (II) systemd-logind: got resume for 13:78
[ 90.633] (II) systemd-logind: got resume for 13:79
[ 90.641] (II) systemd-logind: got resume for 13:72
[ 95.368] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 95.429] (II) systemd-logind: got pause for 226:0
[ 95.429] (II) systemd-logind: got pause for 13:70
[ 95.429] (II) systemd-logind: got pause for 13:71
[ 95.429] (II) systemd-logind: got pause for 13:69
[ 95.429] (II) systemd-logind: got pause for 13:65
[ 95.429] (II) systemd-logind: got pause for 13:66
[ 95.429] (II) systemd-logind: got pause for 13:67
[ 95.429] (II) systemd-logind: got pause for 13:64
[ 95.429] (II) systemd-logind: got pause for 13:78
[ 95.429] (II) systemd-logind: got pause for 13:79
[ 95.429] (II) systemd-logind: got pause for 13:72
[ 95.750] (II) systemd-logind: got resume for 226:0
[ 95.750] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 95.783] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 95.783] (II) RADEON(0): Printing DDC gathered Modelines:
[ 95.784] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 95.784] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 95.821] (II) systemd-logind: got resume for 13:70
[ 95.821] (II) systemd-logind: got resume for 13:71
[ 95.821] (II) systemd-logind: got resume for 13:69
[ 95.821] (II) systemd-logind: got resume for 13:65
[ 95.836] (II) systemd-logind: got resume for 13:66
[ 95.843] (II) systemd-logind: got resume for 13:67
[ 95.853] (II) systemd-logind: got resume for 13:64
[ 95.866] (II) systemd-logind: got resume for 13:78
[ 95.876] (II) systemd-logind: got resume for 13:79
[ 95.897] (II) systemd-logind: got resume for 13:72
[ 98.008] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 98.061] (II) systemd-logind: got pause for 226:0
[ 98.061] (II) systemd-logind: got pause for 13:70
[ 98.061] (II) systemd-logind: got pause for 13:71
[ 98.061] (II) systemd-logind: got pause for 13:69
[ 98.061] (II) systemd-logind: got pause for 13:65
[ 98.061] (II) systemd-logind: got pause for 13:66
[ 98.061] (II) systemd-logind: got pause for 13:67
[ 98.061] (II) systemd-logind: got pause for 13:64
[ 98.061] (II) systemd-logind: got pause for 13:78
[ 98.061] (II) systemd-logind: got pause for 13:79
[ 98.061] (II) systemd-logind: got pause for 13:72
[ 98.614] (II) systemd-logind: got resume for 226:0
[ 98.614] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 98.648] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 98.648] (II) RADEON(0): Printing DDC gathered Modelines:
[ 98.648] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 98.648] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 98.687] (II) systemd-logind: got resume for 13:70
[ 98.688] (II) systemd-logind: got resume for 13:71
[ 98.688] (II) systemd-logind: got resume for 13:69
[ 98.688] (II) systemd-logind: got resume for 13:65
[ 98.693] (II) systemd-logind: got resume for 13:66
[ 98.703] (II) systemd-logind: got resume for 13:67
[ 98.710] (II) systemd-logind: got resume for 13:64
[ 98.723] (II) systemd-logind: got resume for 13:78
[ 98.726] (II) systemd-logind: got resume for 13:79
[ 98.743] (II) systemd-logind: got resume for 13:72
[ 99.618] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 99.674] (II) systemd-logind: got pause for 226:0
[ 99.674] (II) systemd-logind: got pause for 13:70
[ 99.674] (II) systemd-logind: got pause for 13:71
[ 99.674] (II) systemd-logind: got pause for 13:69
[ 99.674] (II) systemd-logind: got pause for 13:65
[ 99.674] (II) systemd-logind: got pause for 13:66
[ 99.674] (II) systemd-logind: got pause for 13:67
[ 99.674] (II) systemd-logind: got pause for 13:64
[ 99.674] (II) systemd-logind: got pause for 13:78
[ 99.674] (II) systemd-logind: got pause for 13:79
[ 99.674] (II) systemd-logind: got pause for 13:72
[ 123.984] (II) systemd-logind: got resume for 226:0
[ 123.984] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 124.017] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 124.017] (II) RADEON(0): Printing DDC gathered Modelines:
[ 124.017] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 124.017] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 124.096] (II) systemd-logind: got resume for 13:70
[ 124.096] (II) systemd-logind: got resume for 13:71
[ 124.096] (II) systemd-logind: got resume for 13:69
[ 124.096] (II) systemd-logind: got resume for 13:65
[ 124.104] (II) systemd-logind: got resume for 13:66
[ 124.118] (II) systemd-logind: got resume for 13:67
[ 124.130] (II) systemd-logind: got resume for 13:64
[ 124.140] (II) systemd-logind: got resume for 13:78
[ 124.150] (II) sYes - I'm using startx:
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec startx
.xinitrc:
/usr/bin/xscreensaver -no-splash &
xautolock -time 60 -locker "sudo pm-suspend" &
xset -dpms s noblank
xset b off
exec mate-session
Excerpt of the system journal (doesn't look suspicious for me): I just booted, logged in (startx), switch to tty2 to refresh the screen on tty1 and rebooted.
Sep 01 20:41:37 bra kernel: [drm] radeon kernel modesetting enabled.
Sep 01 20:41:37 bra kernel: [drm] initializing kernel modesetting (RV635 0x1002:0x9591 0x17AA:0x2117).
Sep 01 20:41:37 bra kernel: [drm] register mmio base: 0xCFFF0000
Sep 01 20:41:37 bra kernel: [drm] register mmio size: 65536
Sep 01 20:41:37 bra kernel: ATOM BIOS: M86M
Sep 01 20:41:37 bra kernel: radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
Sep 01 20:41:37 bra kernel: radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
Sep 01 20:41:37 bra kernel: [drm] Detected VRAM RAM=256M, BAR=256M
Sep 01 20:41:37 bra kernel: [drm] RAM width 128bits DDR
Sep 01 20:41:37 bra kernel: [TTM] Zone kernel: Available graphics memory: 4054930 kiB
Sep 01 20:41:37 bra kernel: [TTM] Zone dma32: Available graphics memory: 2097152 kiB
Sep 01 20:41:37 bra kernel: [TTM] Initializing pool allocator
Sep 01 20:41:37 bra kernel: [TTM] Initializing DMA pool allocator
Sep 01 20:41:37 bra kernel: [drm] radeon: 256M of VRAM memory ready
Sep 01 20:41:37 bra kernel: [drm] radeon: 512M of GTT memory ready.
Sep 01 20:41:37 bra kernel: [drm] Loading RV635 Microcode
Sep 01 20:41:37 bra kernel: [drm] radeon: power management initialized
Sep 01 20:41:37 bra kernel: [drm] GART: num cpu pages 131072, num gpu pages 131072
Sep 01 20:41:37 bra kernel: e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:25:9d:62:d0
Sep 01 20:41:37 bra kernel: e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
Sep 01 20:41:37 bra kernel: e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
Sep 01 20:41:37 bra kernel: snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
Sep 01 20:41:37 bra kernel: ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102f conflicts with OpRegion 0x0000000000001000-0x000000000000107f (\_SB_.PCI0.LPC_.PMIO) (20140424/utaddress-258)
Sep 01 20:41:37 bra kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Sep 01 20:41:37 bra kernel: ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140424/utaddress-258)
Sep 01 20:41:37 bra kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Sep 01 20:41:37 bra kernel: ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140424/utaddress-258)
Sep 01 20:41:37 bra kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Sep 01 20:41:37 bra kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
Sep 01 20:41:38 bra kernel: pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4300000-0xf7ffffff:
Sep 01 20:41:38 bra kernel: excluding 0xf4300000-0xf46cffff
Sep 01 20:41:38 bra kernel: yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref]
Sep 01 20:41:38 bra kernel: pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff:
Sep 01 20:41:38 bra kernel: excluding 0xf0000000-0xf3ffffff
Sep 01 20:41:38 bra kernel: r592: driver successfully loaded
Sep 01 20:41:38 bra kernel: r852: driver loaded successfully
Sep 01 20:41:38 bra kernel: microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
Sep 01 20:41:38 bra kernel: microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
Sep 01 20:41:38 bra kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Sep 01 20:41:38 bra kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
Sep 01 20:41:38 bra kernel: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
Sep 01 20:41:38 bra kernel: radeon 0000:01:00.0: WB enabled
Sep 01 20:41:38 bra kernel: radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff8800bacd5c00
Sep 01 20:41:38 bra kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Sep 01 20:41:38 bra kernel: [drm] Driver supports precise vblank timestamp query.
Sep 01 20:41:38 bra kernel: radeon 0000:01:00.0: irq 49 for MSI/MSI-X
Sep 01 20:41:38 bra kernel: radeon 0000:01:00.0: radeon: using MSI.
Sep 01 20:41:38 bra kernel: [drm] radeon: irq initialized.
Sep 01 20:41:38 bra kernel: [drm] ring test on 0 succeeded in 1 usecs
Sep 01 20:41:38 bra kernel: [drm] ib test on ring 0 succeeded in 0 usecs
Sep 01 20:41:38 bra kernel: [drm] radeon atom DIG backlight initialized
Sep 01 20:41:38 bra kernel: [drm] Radeon Display Connectors
Sep 01 20:41:38 bra kernel: [drm] Connector 0:
Sep 01 20:41:38 bra kernel: [drm] DVI-I-1
Sep 01 20:41:38 bra kernel: [drm] HPD3
Sep 01 20:41:38 bra kernel: [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
Sep 01 20:41:38 bra kernel: [drm] Encoders:
Sep 01 20:41:38 bra kernel: [drm] DFP1: INTERNAL_UNIPHY
Sep 01 20:41:38 bra kernel: [drm] Connector 1:
Sep 01 20:41:38 bra kernel: [drm] LVDS-1
Sep 01 20:41:38 bra kernel: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
Sep 01 20:41:38 bra kernel: [drm] Encoders:
Sep 01 20:41:38 bra kernel: [drm] LCD1: INTERNAL_KLDSCP_LVTMA
Sep 01 20:41:38 bra kernel: [drm] Connector 2:
Sep 01 20:41:38 bra kernel: [drm] DP-1
Sep 01 20:41:38 bra kernel: [drm] HPD1
Sep 01 20:41:38 bra kernel: [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
Sep 01 20:41:38 bra kernel: [drm] Encoders:
Sep 01 20:41:38 bra kernel: [drm] DFP2: INTERNAL_UNIPHY
Sep 01 20:41:38 bra kernel: [drm] Connector 3:
Sep 01 20:41:38 bra kernel: [drm] VGA-1
Sep 01 20:41:38 bra kernel: [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
Sep 01 20:41:38 bra kernel: [drm] Encoders:
Sep 01 20:41:38 bra kernel: [drm] CRT1: INTERNAL_KLDSCP_DAC1
Sep 01 20:41:38 bra kernel: ppdev: user-space parallel port driver
Sep 01 20:41:38 bra systemd[1]: Starting Sound Card.
Sep 01 20:41:38 bra systemd[1]: Reached target Sound Card.
Sep 01 20:41:38 bra kernel: iTCO_vendor_support: vendor-support=0
Sep 01 20:41:38 bra kernel: pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
Sep 01 20:41:38 bra kernel: excluding 0xc0000-0xd3fff 0xdc000-0xfffff
Sep 01 20:41:38 bra kernel: pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
Sep 01 20:41:38 bra kernel: excluding 0xa0000000-0xa0ffffff
Sep 01 20:41:38 bra kernel: pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
Sep 01 20:41:38 bra kernel: excluding 0x60000000-0x60ffffff
Sep 01 20:41:38 bra kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
Sep 01 20:41:38 bra kernel: iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
Sep 01 20:41:38 bra kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90010, key code 190): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90011, key code 148): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90012, key code 152): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90013, key code 236): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90014, key code 238): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90015, key code 212): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90016, key code 227): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90017, key code 191): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90019, key code 205): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x9001a, key code 225): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x9001b, key code 224): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x9001d, key code 372): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[227]: renamed network interface wlan0 to wlp3s0
Sep 01 20:41:39 bra kernel: [drm] fb mappable at 0xD0141000
Sep 01 20:41:39 bra kernel: [drm] vram apper at 0xD0000000
Sep 01 20:41:39 bra kernel: [drm] size 7299072
Sep 01 20:41:39 bra kernel: [drm] fb depth is 24
Sep 01 20:41:39 bra kernel: [drm] pitch is 6912
Sep 01 20:41:39 bra kernel: fbcon: radeondrmfb (fb0) is primary device
Sep 01 20:41:39 bra kernel: Console: switching to colour frame buffer device 210x65
Sep 01 20:41:39 bra kernel: radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
Sep 01 20:41:39 bra kernel: radeon 0000:01:00.0: registered panic notifier
Sep 01 20:41:39 bra kernel: [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
Sep 01 20:41:38 bra systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
Sep 01 20:41:39 bra systemd[1]: Started Update UTMP about System Boot/Shutdown.
Sep 01 20:41:39 bra systemd[1]: Starting System Initialization.
Sep 01 20:41:39 bra systemd[1]: Reached target System Initialization.
Sep 01 20:41:39 bra systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Sep 01 20:41:39 bra systemd[1]: Starting CUPS Printer Service Spool.
Sep 01 20:41:40 bra systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Sep 01 20:41:40 bra systemd[1]: Starting Login Service...
Sep 01 20:41:40 bra systemd[1]: Starting Permit User Sessions...
Sep 01 20:41:40 bra systemd[1]: Started LVM2 PV scan on device 254:0.
Sep 01 20:41:40 bra systemd[1]: Started Restore Sound Card State.
Sep 01 20:41:40 bra systemd[1]: Starting system-systemd\x2dbacklight.slice.
Sep 01 20:41:40 bra systemd[1]: Created slice system-systemd\x2dbacklight.slice.
Sep 01 20:41:40 bra systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:radeon_bl0...
Sep 01 20:41:40 bra systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:acpi_video0...
Sep 01 20:41:40 bra systemd[1]: Started Permit User Sessions.
Sep 01 20:41:40 bra systemd[1]: Starting Getty on tty1...
Sep 01 20:41:40 bra systemd[1]: Started Getty on tty1.
Sep 01 20:41:40 bra systemd[1]: Starting Login Prompts.
Sep 01 20:41:40 bra systemd[1]: Reached target Login Prompts.
Sep 01 20:41:40 bra systemd-logind[416]: New seat seat0.
Sep 01 20:41:40 bra systemd-logind[416]: Watching system buttons on /dev/input/event6 (Power Button)
Sep 01 20:41:40 bra systemd-logind[416]: Watching system buttons on /dev/input/event7 (Video Bus)
Sep 01 20:41:40 bra systemd-logind[416]: Watching system buttons on /dev/input/event4 (Lid Switch)
Sep 01 20:41:40 bra systemd-logind[416]: Watching system buttons on /dev/input/event5 (Sleep Button)
Sep 01 20:41:40 bra systemd-logind[416]: Watching system buttons on /dev/input/event8 (ThinkPad Extra Buttons)
Sep 01 20:41:40 bra systemd[1]: Started Login Service.
Sep 01 20:41:40 bra systemd[1]: Started Initialize hardware monitoring sensors.
Sep 01 20:41:40 bra systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:radeon_bl0.
Sep 01 20:41:40 bra systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:acpi_video0.
Sep 01 20:41:40 bra dbus[392]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Sep 01 20:41:40 bra systemd[1]: Starting Authorization Manager...
Sep 01 20:41:40 bra dbus[392]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Sep 01 20:41:40 bra systemd[1]: Starting Manage, Install and Generate Color Profiles...
Sep 01 20:41:40 bra polkitd[520]: Started polkitd version 0.112
Sep 01 20:41:40 bra dbus[392]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Sep 01 20:41:40 bra systemd[1]: Started Manage, Install and Generate Color Profiles.
Sep 01 20:41:40 bra polkitd[520]: Loading rules from directory /etc/polkit-1/rules.d
Sep 01 20:41:40 bra polkitd[520]: Loading rules from directory /usr/share/polkit-1/rules.d
Sep 01 20:41:40 bra polkitd[520]: Finished loading, compiling and executing 2 rules
Sep 01 20:41:40 bra dbus[392]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Sep 01 20:41:40 bra systemd[1]: Started Authorization Manager.
Sep 01 20:41:40 bra polkitd[520]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
Sep 01 20:41:40 bra dkms[391]: Kernel preparation unnecessary for this kernel. Skipping...
Sep 01 20:41:41 bra dkms[391]: Building module:
Sep 01 20:41:41 bra kernel: e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
Sep 01 20:41:41 bra kernel: e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
Sep 01 20:41:43 bra kernel: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
Sep 01 20:41:43 bra kernel: e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
Sep 01 20:41:43 bra dbus[392]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
Sep 01 20:41:43 bra dbus[392]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.nm-dispatcher.service': Unit dbus-org.freedesktop.nm-dispatcher.service failed to load: No such file or directory.
Sep 01 20:41:43 bra kernel: psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
Sep 01 20:41:44 bra dkms[391]: cleaning build area....
Sep 01 20:41:44 bra kernel: input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input16
Sep 01 20:41:44 bra avahi-daemon[383]: Registering new address record for fe80::21c:25ff:fe9d:62d0 on eth0.*.
Sep 01 20:41:47 bra dkms[391]: cd /var/lib/dkms/fglrx/8.892/build; sh make.sh --nohints --uname_r=3.16.1-1-ARCH --norootcheck....(bad exit status: 1)
Sep 01 20:41:47 bra dkms[391]: Error! Bad return status for module build on kernel: 3.16.1-1-ARCH (x86_64)
Sep 01 20:41:47 bra dkms[391]: Consult /var/lib/dkms/fglrx/8.892/build/make.log for more information.
Sep 01 20:41:47 bra systemd[1]: Started Dynamic Kernel Modules System.
Sep 01 20:41:48 bra login[427]: pam_unix(login:session): session opened for user hel by LOGIN(uid=0)
Sep 01 20:41:48 bra systemd[1]: Starting user-1000.slice.
Sep 01 20:41:48 bra systemd[1]: Created slice user-1000.slice.
Sep 01 20:41:48 bra systemd[1]: Starting User Manager for UID 1000...
Sep 01 20:41:48 bra systemd[867]: pam_unix(systemd-user:session): session opened for user hel by (uid=0)
Sep 01 20:41:48 bra systemd[1]: Starting Session c1 of user hel.
Sep 01 20:41:48 bra systemd[1]: Started Session c1 of user hel.
Sep 01 20:41:48 bra systemd-logind[416]: New session c1 of user hel.
Sep 01 20:41:48 bra systemd[867]: Starting Paths.
Sep 01 20:41:48 bra systemd[867]: Reached target Paths.
Sep 01 20:41:48 bra systemd[867]: Starting Timers.
Sep 01 20:41:48 bra systemd[867]: Reached target Timers.
Sep 01 20:41:48 bra systemd[867]: Starting Sockets.
Sep 01 20:41:48 bra systemd[867]: Reached target Sockets.
Sep 01 20:41:48 bra systemd[867]: Starting Basic System.
Sep 01 20:41:48 bra systemd[867]: Reached target Basic System.
Sep 01 20:41:48 bra systemd[867]: Starting Default.
Sep 01 20:41:48 bra systemd[867]: Reached target Default.
Sep 01 20:41:48 bra systemd[867]: Startup finished in 131ms.
Sep 01 20:41:48 bra systemd[1]: Started User Manager for UID 1000.
Sep 01 20:41:48 bra login[427]: LOGIN ON tty1 BY hel
Sep 01 20:41:48 bra NetworkManager[384]: <info> startup complete
Sep 01 20:41:54 bra dbus[392]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Sep 01 20:41:54 bra dbus[392]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Sep 01 20:41:54 bra systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Sep 01 20:41:54 bra systemd[1]: Starting Disk Manager...
Sep 01 20:41:54 bra polkitd[520]: Registered Authentication Agent for unix-session:c1 (system bus name :1.16 [/usr/lib/mate-polkit/polkit-mate-authentication-agent-1], object path /org/mate/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
Sep 01 20:41:54 bra dbus[392]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Sep 01 20:41:54 bra systemd[1]: Starting Daemon for power management...
Sep 01 20:41:54 bra udisksd[1121]: udisks daemon version 2.1.3 starting
Sep 01 20:41:54 bra dbus[392]: [system] Successfully activated service 'org.freedesktop.UPower'
Sep 01 20:41:54 bra systemd[1]: Started Daemon for power management.
Sep 01 20:41:54 bra dbus[392]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Sep 01 20:41:54 bra systemd[1]: Started RealtimeKit Scheduling Policy Service.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Successfully called chroot.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Successfully dropped privileges.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Successfully limited resources.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Running.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Canary thread running.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Watchdog thread running.
Sep 01 20:41:54 bra dbus[392]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Sep 01 20:41:54 bra systemd[1]: Started Disk Manager.
Sep 01 20:41:54 bra udisksd[1121]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Sep 01 20:41:54 bra rtkit-daemon[1120]: Successfully made thread 1119 of process 1119 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Supervising 1 threads of 1 processes of 1 users.
Sep 01 20:41:54 bra org.a11y.Bus[1057]: Activating service name='org.a11y.atspi.Registry'
Sep 01 20:41:54 bra rtkit-daemon[1120]: Supervising 1 threads of 1 processes of 1 users.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Successfully made thread 1193 of process 1119 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Supervising 2 threads of 1 processes of 1 users.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Supervising 2 threads of 1 processes of 1 users.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Successfully made thread 1194 of process 1119 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Supervising 3 threads of 1 processes of 1 users.
Sep 01 20:41:54 bra org.a11y.Bus[1057]: Successfully activated service 'org.a11y.atspi.Registry'
Sep 01 20:41:54 bra org.a11y.atspi.Registry[1176]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Sep 01 20:41:54 bra org.a11y.atspi.Registry[1176]: ** (at-spi2-registryd:1185): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
Sep 01 20:41:54 bra org.a11y.atspi.Registry[1176]: ** (at-spi2-registryd:1185): WARNING **: Unable to register client with session manager
Sep 01 20:41:54 bra dbus[392]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Sep 01 20:41:54 bra dbus[392]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory.
Sep 01 20:41:55 bra rtkit-daemon[1120]: Successfully made thread 1206 of process 1206 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Sep 01 20:41:55 bra rtkit-daemon[1120]: Supervising 4 threads of 2 processes of 1 users.
Sep 01 20:41:55 bra rtkit-daemon[1120]: Successfully made thread 1208 of process 1208 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Sep 01 20:41:55 bra rtkit-daemon[1120]: Supervising 5 threads of 3 processes of 1 users.
Sep 01 20:41:55 bra pulseaudio[1208]: [pulseaudio] pid.c: Daemon already running.
Sep 01 20:41:56 bra dbus[392]: [system] Activating service name='org.mate.SettingsDaemon.DateTimeMechanism' (using servicehelper)
Sep 01 20:41:56 bra dbus[392]: [system] Successfully activated service 'org.mate.SettingsDaemon.DateTimeMechanism'
Sep 01 20:42:01 bra systemd-logind[416]: kernel does not support evdev-revocation
Sep 01 20:42:01 bra systemd[1]: Starting Getty on tty2...
Sep 01 20:42:01 bra systemd[1]: Started Getty on tty2.
Sep 01 20:42:05 bra systemd[1]: Started Getty on tty2.
Sep 01 20:42:08 bra systemd-logind[416]: System is rebooting.
Sep 01 20:42:08 bra systemd[1]: Stopping Session c1 of user hel.
Sep 01 20:42:08 bra systemd[1]: Stopped Session c1 of user hel.
Sep 01 20:42:08 bra systemd[1]: Stopping LVM2 PV scan on device 254:0...
Sep 01 20:42:08 bra systemd[1]: Stopping Sound Card.
Sep 01 20:42:08 bra systemd[1]: Stopped target Sound Card.
Sep 01 20:42:08 bra systemd[1]: Stopping system-systemd\x2dfsck.slice.
Sep 01 20:42:08 bra systemd[1]: Removed slice system-systemd\x2dfsck.slice.
Sep 01 20:42:08 bra systemd[1]: Stopping LVM2 metadata daemon...
Sep 01 20:42:08 bra systemd[1]: Stopping Daemon for power management...
Sep 01 20:42:08 bra systemd[1]: Stopping RealtimeKit Scheduling Policy Service...
Sep 01 20:42:08 bra systemd[1]: Stopping Disk Manager...
Sep 01 20:42:08 bra systemd[1]: Stopping User Manager for UID 1000...
Sep 01 20:42:09 bra systemd[867]: Stopping Default.
Sep 01 20:42:09 bra systemd[867]: Stopped target Default.
Sep 01 20:42:09 bra systemd[867]: Stopping Basic System.
Sep 01 20:42:09 bra systemd[867]: Stopped target Basic System.
Sep 01 20:42:09 bra systemd[867]: Stopping Paths.
Sep 01 20:42:09 bra systemd[867]: Stopped target Paths.
Sep 01 20:42:09 bra systemd[867]: Stopping Timers.
Sep 01 20:42:09 bra systemd[867]: Stopped target Timers.
Sep 01 20:42:09 bra systemd[867]: Stopping Sockets.
Sep 01 20:42:09 bra systemd[867]: Stopped target Sockets.
Sep 01 20:42:09 bra systemd[867]: Starting Shutdown.
Sep 01 20:42:09 bra systemd[867]: Reached target Shutdown.
Sep 01 20:42:09 bra systemd[867]: Starting Exit the Session...
Sep 01 20:42:09 bra kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Sep 01 20:42:08 bra polkitd[520]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.16, object path /org/mate/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8) (disconnected from bus)
Sep 01 20:42:08 bra thinkfan[387]: Caught deadly signal.
Sep 01 20:42:08 bra thinkfan[387]: Cleaning up and resetting fan control.
Sep 01 20:42:08 bra NetworkManager[384]: <info> caught signal 15, shutting down normally.
Sep 01 20:42:08 bra NetworkManager[384]: <info> (wlp3s0): device state change: unavailable -> unmanaged (reason 'removed') [20 10 36]
Sep 01 20:42:08 bra NetworkManager[384]: <info> exiting (success)
Sep 01 20:42:09 bra avahi-daemon[383]: Got SIGTERM, quitting.
Sep 01 20:42:09 bra avahi-daemon[383]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.100.53.
Sep 01 20:42:09 bra avahi-daemon[383]: avahi-daemon 0.6.31 exiting.
Sep 01 20:42:09 bra systemd[868]: pam_unix(systemd-user:session): session closed for user hel
Sep 01 20:42:09 bra systemd[867]: Received SIGRTMIN+24 from PID 1279 (kill).
Sep 01 20:42:09 bra NetworkManager[384]: (NetworkManager:384): GLib-CRITICAL **: Source ID 86 was not found when attempting to remove it
Sep 01 20:42:10 bra systemd[1]: Stopped Getty on tty1.
Sep 01 20:42:10 bra systemd[1]: Stopped Authorization Manager.
Sep 01 20:42:10 bra systemd[1]: Stopped Manage, Install and Generate Color Profiles.
Sep 01 20:42:10 bra systemd[1]: Stopped User Manager for UID 1000.
Sep 01 20:42:10 bra systemd[1]: Stopped RealtimeKit Scheduling Policy Service.
Sep 01 20:42:10 bra systemd[1]: Stopped Disk Manager.
Sep 01 20:42:10 bra systemd[1]: Stopped Daemon for power management.
Sep 01 20:42:10 bra systemd[1]: Stopped Getty on tty2.
Sep 01 20:42:10 bra systemd[1]: Stopped Initialize hardware monitoring sensors.
Sep 01 20:42:10 bra systemd[1]: Stopped Dynamic Kernel Modules System.
Sep 01 20:42:10 bra systemd[1]: Shutting down.
Sep 01 20:42:10 bra systemd[1]: Hardware watchdog 'INTCAMT', version 0
Sep 01 20:42:10 bra systemd[1]: Set hardware watchdog to 10min.
Sep 01 20:42:10 bra systemd-shutdown[1]: Sending SIGTERM to remaining processes...
Sep 01 20:42:10 bra systemd-journal[188]: Journal stopped
I can't downgrade the ati-driver because it needs glamor-egl which conflicts with xorg-1.16.
After deinstalling the ati-driver and removing the 20-radeon.conf file, I got the following error (Xorg.0.log):
[ 120.639]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 120.639] X Protocol Version 11, Revision 0
[ 120.640] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 120.640] Current Operating System: Linux bra 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[ 120.640] Kernel command line: BOOT_IMAGE=../vmlinuz-linux cryptdevice=/dev/sda2:main root=/dev/mapper/main-root ro locale=de_DE.UTF-8 initrd=../initramfs-linux.img
[ 120.640] Build Date: 31 July 2014 11:53:19AM
[ 120.640]
[ 120.640] Current version of pixman: 0.32.6
[ 120.640] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 120.640] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 120.640] (==) Log file: "/home/hel/.local/share/xorg/Xorg.0.log", Time: Mon Sep 1 20:28:35 2014
[ 120.641] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 120.641] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 120.641] (==) No Layout section. Using the first Screen section.
[ 120.641] (==) No screen section available. Using defaults.
[ 120.641] (**) |-->Screen "Default Screen Section" (0)
[ 120.641] (**) | |-->Monitor "<default monitor>"
[ 120.641] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 120.641] (==) Automatically adding devices
[ 120.641] (==) Automatically enabling devices
[ 120.641] (==) Automatically adding GPU devices
[ 120.641] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 120.641] Entry deleted from font path.
[ 120.641] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 120.641] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 120.641] Entry deleted from font path.
[ 120.641] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 120.641] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 120.641] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 120.641] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 120.641] (II) Loader magic: 0x818d80
[ 120.641] (II) Module ABI versions:
[ 120.641] X.Org ANSI C Emulation: 0.4
[ 120.641] X.Org Video Driver: 18.0
[ 120.641] X.Org XInput driver : 21.0
[ 120.641] X.Org Server Extension : 8.0
[ 120.740] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c4
[ 120.740] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 120.787] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 120.789] (--) PCI:*(0:1:0:0) 1002:9591:17aa:2117 rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 120.789] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 120.790] (II) LoadModule: "glx"
[ 120.790] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 120.792] (II) Module glx: vendor="X.Org Foundation"
[ 120.792] compiled for 1.16.0, module version = 1.0.0
[ 120.792] ABI class: X.Org Server Extension, version 8.0
[ 120.792] (==) AIGLX enabled
[ 120.792] (==) Matched ati as autoconfigured driver 0
[ 120.792] (==) Matched ati as autoconfigured driver 1
[ 120.792] (==) Matched modesetting as autoconfigured driver 2
[ 120.792] (==) Matched fbdev as autoconfigured driver 3
[ 120.792] (==) Matched vesa as autoconfigured driver 4
[ 120.792] (==) Assigned the driver to the xf86ConfigLayout
[ 120.792] (II) LoadModule: "ati"
[ 120.792] (WW) Warning, couldn't open module ati
[ 120.792] (II) UnloadModule: "ati"
[ 120.792] (II) Unloading ati
[ 120.792] (EE) Failed to load module "ati" (module does not exist, 0)
[ 120.792] (II) LoadModule: "modesetting"
[ 120.792] (WW) Warning, couldn't open module modesetting
[ 120.792] (II) UnloadModule: "modesetting"
[ 120.792] (II) Unloading modesetting
[ 120.792] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 120.792] (II) LoadModule: "fbdev"
[ 120.793] (WW) Warning, couldn't open module fbdev
[ 120.793] (II) UnloadModule: "fbdev"
[ 120.793] (II) Unloading fbdev
[ 120.793] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 120.793] (II) LoadModule: "vesa"
[ 120.793] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 120.793] (II) Module vesa: vendor="X.Org Foundation"
[ 120.793] compiled for 1.16.0, module version = 2.3.2
[ 120.793] Module class: X.Org Video Driver
[ 120.793] ABI class: X.Org Video Driver, version 18.0
[ 120.793] (II) VESA: driver for VESA chipsets: vesa
[ 120.793] (++) using VT number 1
[ 120.793] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 120.793] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 120.793] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 120.793] (II) Loading sub module "vbe"
[ 120.793] (II) LoadModule: "vbe"
[ 120.793] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 120.793] (II) Module vbe: vendor="X.Org Foundation"
[ 120.793] compiled for 1.16.0, module version = 1.1.0
[ 120.793] ABI class: X.Org Video Driver, version 18.0
[ 120.793] (II) Loading sub module "int10"
[ 120.793] (II) LoadModule: "int10"
[ 120.793] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 120.793] (II) Module int10: vendor="X.Org Foundation"
[ 120.793] compiled for 1.16.0, module version = 1.0.0
[ 120.793] ABI class: X.Org Video Driver, version 18.0
[ 120.793] (II) VESA(0): initializing int10
[ 120.794] (WW) xf86ReadBIOS: Failed to open /dev/mem (Permission denied)
[ 120.794] (EE) VESA(0): Cannot read int vect
[ 120.794] (II) UnloadModule: "vesa"
[ 120.794] (II) UnloadSubModule: "int10"
[ 120.794] (II) Unloading int10
[ 120.794] (II) UnloadSubModule: "vbe"
[ 120.794] (II) Unloading vbe
[ 120.794] (EE) Screen(s) found, but none have a usable configuration.
[ 120.794] (EE)
Fatal server error:
[ 120.794] (EE) no screens found(EE)
[ 120.794] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 120.794] (EE) Please also check the log file at "/home/hel/.local/share/xorg/Xorg.0.log" for additional information.
[ 120.794] (EE)
[ 120.846] (EE) Server terminated with error (1). Closing log file.
"[ 120.794] (WW) xf86ReadBIOS: Failed to open /dev/mem (Permission denied)" seems to be the problem.
Edit: By the way: I'm using an external monitor but using the laptop without the external monitor leads to the same problem.
Last edited by hel (2014-09-01 19:10:09) -
Xte no longer works with xorg-server-1.4.0.90-3
Program xte from xautomation no longer works. It's no longer possible to simulate X key strokes. xte runs and returns 0 but the key strokes are not simulated. It last worked in xorg-server-1.4-6. xte uses libxtst to work its magic.
Has anyone else had these same issues? Is there an alternative to xte that will work with Arch's latest xorg-server? Thanks.Just to follow up on this... the same startx messages are still coming with the latest xorg-server 1.4.0.90-5
I've spent hours searching but have not run across a fix that works and don't know what's causing it. At least so far, I've not found any ill effects from it on my machine. -
Xorg freezes, video lags, high log output (linux,xorg-server,nvidia)
Hey,
It seems the up-to-date system doesn't work for my Laptop anymore. Wasn't too sure where to post this, as I couldn't test this anywhere else yet.
I experience extreme lags in Xorg (apparently due to high log output to Xorg.0.log as mentioned here: https://bbs.archlinux.org/viewtopic.php … 9#p1305939 ). These lags seem to be related to Xorg, the linux kernel and maybe something else I haven't found yet.
Concerning the hardware: Dell XPS 1340 with:
00:00.0 Host bridge: NVIDIA Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: NVIDIA Corporation MCP79 LPC Bridge (rev b2)
00:03.1 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.2 SMBus: NVIDIA Corporation MCP79 SMBus (rev b1)
00:03.3 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.5 Co-processor: NVIDIA Corporation MCP79 Co-processor (rev b1)
00:04.0 USB controller: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:04.1 USB controller: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:06.0 USB controller: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:06.1 USB controller: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:08.0 Audio device: NVIDIA Corporation MCP79 High Definition Audio (rev b1)
00:09.0 PCI bridge: NVIDIA Corporation MCP79 PCI Bridge (rev b1)
00:0a.0 Ethernet controller: NVIDIA Corporation MCP79 Ethernet (rev b1)
00:0b.0 SATA controller: NVIDIA Corporation MCP79 AHCI Controller (rev b1)
00:0c.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:10.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:15.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:16.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:17.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:18.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
01:07.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
01:07.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
01:07.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
01:07.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
02:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce 9200M GS] (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation C79 [GeForce 9400M G] (rev b1)
06:00.0 Network controller: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) (rev 01)
I tested the up-to-date nvidia and nouveau drivers, to no avail. They both spam Xorg.0.log as soon as I watch a video, move a window or do something similiar "hi-res" in Gnome, leading to lags in all applications and X itself until it dies from high CPU usage + high chip temperature.
So I started downgrading my system.
I tested linux 3.9.9 but that didn't do the trick.
Currently I'm on linux 3.8.8-2, nvidia 313.30-5 and xorg-server 1.13.3-1, xf86-input-evdev 2.7.3-2 and xf86-input-wacom 0.20.0-1. This seems to be stable so far, the extreme X log output persists though, as soon as an external monitor is plugged in:
[ 234.963] (II) NVIDIA(GPU-0): Display (DELL2407WFPHC (DFP-1)) does not support NVIDIA 3D
[ 234.963] (II) NVIDIA(GPU-0): Vision stereo.
[ 234.963] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 234.963] (**) NVIDIA(0): device DELL2407WFPHC (DFP-1) (Using EDID frequencies has
[ 234.963] (**) NVIDIA(0): been enabled on all display devices.)
I tried nvidia drivers with and without my xorg.conf.d snippets, but that didn't change anything.
I'm kinda clueless... which package is the odd one out? All of them? At this point I wouldn't even know where to file a bug report.
I've been away for a couple of months and didn't upgrade the system too often in between, but this behavior is really odd.
Any ideas/ help would be highly appreciated!Okay... I can definitely revise my statement about the Xorg.0.log. It has been the same since yesterday... so the spamming is gone!
I'd really like to find out if this is a linux kernel or a direct Xorg problem (of version 1.14 and above). -
While xorg-server 1.5.3 itself works just fine on my machine, several drivers don't want to play nice under it.
For instance, synaptics is really shaky, linux-wacom doesn't quite support hot plugging or 1.5.3 at all (all the way to total full blown system hangs under some circumstances), kwin with composite tends to kill my X session when I do certain things, and a few other buggies I can't remember now.
I've been stuck using Catalyst 8.8 for a while now and it's not a perfect release either. 8.5 seemed to do it best for me but if I wanna use that, I have to use an old kernel along with all the old modules that work with it... Not an option.
So I'm probing the community here to see if anyone else has experienced some or all of these issues using xorg-server 1.5.3 (and/or Catalyst 8.11 which are interdependant it seems). Mind you most of the problems might stem from the latter, but since I just had to shell out 500 hard earned ones on a root canal, a new laptop ain't in the budget for quite some time.
Maybe 8.12 fixes some things ? ... Has anyone been succesful using the linux-wacom driver under 1.5.3 ? ..
Feedback would be much appreciated.
- Wanna Upgrademy wacom works until i lift it from the tablet....*sigh*....once this wacom issue is fixed by the wacom guys, the xorg guys come with a new update which breaks everything and once the wacom guys have fixed it......
I installed the latest wacom driver 0.8.2-1, hal is running, xorg 1.5.3, wacom Intuous 2, arch64. If anyone has some tips on how to get this fixed, thanks -
Recompiling xf86-video-intel 2.9.0 against xorg-server 1.6.5
When xf86-video-intel 2.9.0 will come into [extra], it will have been compiled against xorg-server 1.7.0 or later. I'll stay with 1.6.5 for the time being, and I want to know if I need to recompile xf86-video-intel. The sources (intel 2.9.0 and server 1.6.5) are compatible. Will the binaries be if video-intel was compiled against a different version of xorg-server?
I have replaced xf86-video-intel by xf86-video-intel-legacy
Maybe you are looking for
-
How can I get a list of all laptops or users with folder direction enabled or offline files enabled, be it sccm or poerwshell . i have struggled for a week.
-
How to determine who has a PDF file open?
I generate a daily report in PDF format and place the file on a shared server. The problem arises when I attempt to delete the file (in order to replace with the new version) and someone has the file open. I end up with two versions of file on she
-
Hello to everyone. I just wanted to report a bug found in the new Itunes U app. I didn't know where else to post it. After looking through Review Lecture 1 slides from "Standford iPad and iPhone App Development" I experience the following problem. As
-
Calling Stored Procedure(takes varray of objects as input) from jdeveloper
How can i call Stored Procedure which takes varray of objects as input from jdeveloper My object is : TYPE Entry IS Object ( Name VARCHAR2(1024), Value VARCHAR2(1024) & the varray is : TYPE EntryArr IS varray(10) OF Entry ; & the procedure is : PROCE
-
Email photos as attachments from Lightroom
Is it possible to email photos as attachments from Lightroom? If so, how? When I use the export function in Lightroom to email photos, they are imbedded in the email (gmail), not attached as separate files.