[Xorg] strange scrolling

I recently updated Xorg and when I restarted X everything worked just fine. But when I opened Firefox and scrolled up and down (with mouse or scroll bar) the current page scrolled very slow and painful. First I though is was a Firefox only problem, but when I opened Rox and Opera they had the same problem. I did some search on Google, and ArchLinux but I could not find a solution.
Pleas can someone help me with my problem?
<_abe>

I have installed and configured the ati-drive on my computer and now I don't have any problems anymore with the scrolling or anything else. So I advice you to install the official ati or nvidia drives if you have a ati or nvidia cart. I also advice you to read the following pages:http://wiki.archlinux.org/index.php/Xorg and especially: http://wiki.archlinux.org/index.php/Xorg7
I hope this informations is as helpful to you as it was to me.
<_abe>

Similar Messages

  • [SOLVED] Xorg Strangeness- Running startx runs xorg for a split second

    As in the subject, I am trying to run startx on my Arch (x86_64) machine for the first time since installation, however X only runs for a split second before quitting.. I've checked the log, but there aren't any errors that pop up to tell me what's going on.  What I've been doing that I think may affect the answer:
    Installed proprietary nvidia drivers that I downloaded off of nvidia's website (though I removed it by running sudo ./driver.run -uninstall)
    Installed nvidia drivers from the repository (sudo pacman -S nvidia nvidia-utils)
    shut off nouveau drivers (blacklisted nouveau in /etc/modprobe.d)
    Ran nvidia-xconfig to generate new xorg.conf file
    /var/log/Xorg.0.log shows nothing with (EE), so I assume that everything is going smoothly, however still can't get X to work.  Any help would be appreciated.  Google's let me down so far.
    Perhaps some fresh eyes could help me
    (contents of /var/log/Xorg.0.log)
    [ 22.116]
    X.Org X Server 1.12.2
    Release Date: 2012-05-29
    [ 22.116] X Protocol Version 11, Revision 0
    [ 22.116] Build Operating System: Linux 3.0.32-1-lts x86_64
    [ 22.116] Current Operating System: Linux Ponyville 3.3.7-1-ARCH #1 SMP PREEMPT Tue May 22 00:26:26 CEST 2012 x86_64
    [ 22.117] Kernel command line: root=/dev/sda4 ro
    [ 22.117] Build Date: 30 May 2012 07:24:13PM
    [ 22.117]
    [ 22.117] Current version of pixman: 0.26.0
    [ 22.117] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 22.117] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.119] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 7 08:50:45 2012
    [ 22.148] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.148] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 22.166] (==) ServerLayout "Layout0"
    [ 22.166] (**) |-->Screen "Screen0" (0)
    [ 22.166] (**) | |-->Monitor "Monitor0"
    [ 22.166] (**) | |-->Device "Device0"
    [ 22.166] (**) |-->Input Device "Keyboard0"
    [ 22.166] (**) |-->Input Device "Mouse0"
    [ 22.166] (==) Automatically adding devices
    [ 22.166] (==) Automatically enabling devices
    [ 22.196] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 22.196] Entry deleted from font path.
    [ 22.196] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 22.196] Entry deleted from font path.
    [ 22.196] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 22.196] Entry deleted from font path.
    [ 22.213] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 22.213] Entry deleted from font path.
    [ 22.213] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 22.213] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/100dpi/
    [ 22.213] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 22.213] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 22.213] (WW) Disabling Keyboard0
    [ 22.213] (WW) Disabling Mouse0
    [ 22.213] (II) Loader magic: 0x7c58e0
    [ 22.213] (II) Module ABI versions:
    [ 22.213] X.Org ANSI C Emulation: 0.4
    [ 22.213] X.Org Video Driver: 12.0
    [ 22.213] X.Org XInput driver : 16.0
    [ 22.213] X.Org Server Extension : 6.0
    [ 22.214] (--) PCI:*(0:1:0:0) 10de:0dc4:196e:085a rev 161, Mem @ 0xf8000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 22.214] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 22.214] (II) LoadModule: "extmod"
    [ 22.257] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 22.264] (II) Module extmod: vendor="X.Org Foundation"
    [ 22.264] compiled for 1.12.2, module version = 1.0.0
    [ 22.264] Module class: X.Org Server Extension
    [ 22.264] ABI class: X.Org Server Extension, version 6.0
    [ 22.265] (II) Loading extension MIT-SCREEN-SAVER
    [ 22.265] (II) Loading extension XFree86-VidModeExtension
    [ 22.265] (II) Loading extension XFree86-DGA
    [ 22.265] (II) Loading extension DPMS
    [ 22.265] (II) Loading extension XVideo
    [ 22.265] (II) Loading extension XVideo-MotionCompensation
    [ 22.265] (II) Loading extension X-Resource
    [ 22.265] (II) LoadModule: "dbe"
    [ 22.265] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 22.265] (II) Module dbe: vendor="X.Org Foundation"
    [ 22.265] compiled for 1.12.2, module version = 1.0.0
    [ 22.265] Module class: X.Org Server Extension
    [ 22.265] ABI class: X.Org Server Extension, version 6.0
    [ 22.265] (II) Loading extension DOUBLE-BUFFER
    [ 22.265] (II) LoadModule: "glx"
    [ 22.266] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 22.799] (II) Module glx: vendor="NVIDIA Corporation"
    [ 22.799] compiled for 4.0.2, module version = 1.0.0
    [ 22.799] Module class: X.Org Server Extension
    [ 22.799] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
    [ 22.799] (II) Loading extension GLX
    [ 22.799] (II) LoadModule: "record"
    [ 22.799] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 22.885] (II) Module record: vendor="X.Org Foundation"
    [ 22.885] compiled for 1.12.2, module version = 1.13.0
    [ 22.885] Module class: X.Org Server Extension
    [ 22.885] ABI class: X.Org Server Extension, version 6.0
    [ 22.885] (II) Loading extension RECORD
    [ 22.885] (II) LoadModule: "dri"
    [ 22.885] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 22.911] (II) Module dri: vendor="X.Org Foundation"
    [ 22.911] compiled for 1.12.2, module version = 1.0.0
    [ 22.911] ABI class: X.Org Server Extension, version 6.0
    [ 22.911] (II) Loading extension XFree86-DRI
    [ 22.911] (II) LoadModule: "dri2"
    [ 22.911] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 22.911] (II) Module dri2: vendor="X.Org Foundation"
    [ 22.911] compiled for 1.12.2, module version = 1.2.0
    [ 22.911] ABI class: X.Org Server Extension, version 6.0
    [ 22.911] (II) Loading extension DRI2
    [ 22.911] (II) LoadModule: "nvidia"
    [ 22.912] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 22.993] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 22.993] compiled for 4.0.2, module version = 1.0.0
    [ 22.994] Module class: X.Org Video Driver
    [ 23.021] (II) NVIDIA dlloader X Driver 295.53 Fri May 11 23:29:56 PDT 2012
    [ 23.021] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 23.021] (--) using VT number 7
    [ 23.024] (II) Loading sub module "fb"
    [ 23.024] (II) LoadModule: "fb"
    [ 23.024] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 23.032] (II) Module fb: vendor="X.Org Foundation"
    [ 23.032] compiled for 1.12.2, module version = 1.0.0
    [ 23.032] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 23.032] (II) Loading sub module "wfb"
    [ 23.032] (II) LoadModule: "wfb"
    [ 23.032] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 23.038] (II) Module wfb: vendor="X.Org Foundation"
    [ 23.038] compiled for 1.12.2, module version = 1.0.0
    [ 23.038] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 23.038] (II) Loading sub module "ramdac"
    [ 23.038] (II) LoadModule: "ramdac"
    [ 23.038] (II) Module "ramdac" already built-in
    [ 23.047] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 23.047] (==) NVIDIA(0): RGB weight 888
    [ 23.047] (==) NVIDIA(0): Default visual is TrueColor
    [ 23.047] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 23.047] (**) NVIDIA(0): Enabling 2D acceleration
    [ 23.817] (II) NVIDIA(GPU-0): Display (ViewSonic VA1916wSERIES (CRT-1)) does not support
    [ 23.817] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 23.831] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 450 (GF106) at PCI:1:0:0 (GPU-0)
    [ 23.831] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 23.831] (--) NVIDIA(0): VideoBIOS: 70.06.13.00.51
    [ 23.831] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 23.831] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 23.833] (--) NVIDIA(0): Connected display device(s) on GeForce GTS 450 at PCI:1:0:0
    [ 23.833] (--) NVIDIA(0): ViewSonic VA1916wSERIES (CRT-1)
    [ 23.833] (--) NVIDIA(0): ViewSonic VA1916wSERIES (CRT-1): 400.0 MHz maximum pixel
    [ 23.833] (--) NVIDIA(0): clock
    [ 23.868] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 23.868] (**) NVIDIA(0): device ViewSonic VA1916wSERIES (CRT-1) (Using EDID
    [ 23.868] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 23.874] (II) NVIDIA(0): Assigned Display Device: CRT-1
    [ 23.874] (==) NVIDIA(0):
    [ 23.874] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 23.874] (==) NVIDIA(0): will be used as the requested mode.
    [ 23.874] (==) NVIDIA(0):
    [ 23.874] (II) NVIDIA(0): Validated modes:
    [ 23.874] (II) NVIDIA(0): "nvidia-auto-select"
    [ 23.874] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
    [ 23.903] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
    [ 23.903] (--) NVIDIA(0): option
    [ 23.903] (--) Depth 24 pixmap format is 32 bpp
    [ 23.903] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 23.903] (II) NVIDIA: access.
    [ 23.906] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 23.906] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 23.906] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 23.906] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 23.906] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 23.906] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 23.906] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 23.906] (II) NVIDIA(0): Config Options in the README.
    [ 23.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 23.952] (II) Loading extension NV-GLX
    [ 24.017] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 24.017] (==) NVIDIA(0): Backing store disabled
    [ 24.017] (==) NVIDIA(0): Silken mouse enabled
    [ 24.017] (**) NVIDIA(0): DPMS enabled
    [ 24.017] (II) Loading extension NV-CONTROL
    [ 24.017] (II) Loading extension XINERAMA
    [ 24.017] (II) Loading sub module "dri2"
    [ 24.017] (II) LoadModule: "dri2"
    [ 24.017] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 24.017] (II) Module dri2: vendor="X.Org Foundation"
    [ 24.017] compiled for 1.12.2, module version = 1.2.0
    [ 24.017] ABI class: X.Org Server Extension, version 6.0
    [ 24.017] (II) NVIDIA(0): [DRI2] Setup complete
    [ 24.017] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 24.017] (==) RandR enabled
    [ 24.017] (II) Initializing built-in extension Generic Event Extension
    [ 24.017] (II) Initializing built-in extension SHAPE
    [ 24.017] (II) Initializing built-in extension MIT-SHM
    [ 24.017] (II) Initializing built-in extension XInputExtension
    [ 24.017] (II) Initializing built-in extension XTEST
    [ 24.017] (II) Initializing built-in extension BIG-REQUESTS
    [ 24.017] (II) Initializing built-in extension SYNC
    [ 24.017] (II) Initializing built-in extension XKEYBOARD
    [ 24.017] (II) Initializing built-in extension XC-MISC
    [ 24.017] (II) Initializing built-in extension SECURITY
    [ 24.017] (II) Initializing built-in extension XINERAMA
    [ 24.017] (II) Initializing built-in extension XFIXES
    [ 24.017] (II) Initializing built-in extension RENDER
    [ 24.017] (II) Initializing built-in extension RANDR
    [ 24.017] (II) Initializing built-in extension COMPOSITE
    [ 24.017] (II) Initializing built-in extension DAMAGE
    [ 24.018] (II) Initializing extension GLX
    [ 24.296] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 24.296] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.296] (II) LoadModule: "evdev"
    [ 24.296] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 24.304] (II) Module evdev: vendor="X.Org Foundation"
    [ 24.304] compiled for 1.12.0, module version = 2.7.0
    [ 24.304] Module class: X.Org XInput Driver
    [ 24.304] ABI class: X.Org XInput driver, version 16.0
    [ 24.304] (II) Using input driver 'evdev' for 'Power Button'
    [ 24.304] (**) Power Button: always reports core events
    [ 24.304] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 24.304] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 24.304] (--) evdev: Power Button: Found keys
    [ 24.304] (II) evdev: Power Button: Configuring as keyboard
    [ 24.304] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [ 24.304] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 24.304] (**) Option "xkb_rules" "evdev"
    [ 24.304] (**) Option "xkb_model" "evdev"
    [ 24.304] (**) Option "xkb_layout" "us"
    [ 24.317] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 24.317] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.317] (II) Using input driver 'evdev' for 'Power Button'
    [ 24.317] (**) Power Button: always reports core events
    [ 24.317] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 24.317] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 24.317] (--) evdev: Power Button: Found keys
    [ 24.317] (II) evdev: Power Button: Configuring as keyboard
    [ 24.317] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
    [ 24.317] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 24.317] (**) Option "xkb_rules" "evdev"
    [ 24.317] (**) Option "xkb_model" "evdev"
    [ 24.317] (**) Option "xkb_layout" "us"
    [ 24.318] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
    [ 24.318] (II) No input driver specified, ignoring this device.
    [ 24.318] (II) This device may have been added with another device file.
    [ 24.318] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
    [ 24.318] (II) No input driver specified, ignoring this device.
    [ 24.318] (II) This device may have been added with another device file.
    [ 24.318] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
    [ 24.318] (II) No input driver specified, ignoring this device.
    [ 24.318] (II) This device may have been added with another device file.
    [ 24.318] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
    [ 24.318] (II) No input driver specified, ignoring this device.
    [ 24.318] (II) This device may have been added with another device file.
    [ 24.318] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event10)
    [ 24.318] (II) No input driver specified, ignoring this device.
    [ 24.318] (II) This device may have been added with another device file.
    [ 24.318] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
    [ 24.318] (II) No input driver specified, ignoring this device.
    [ 24.318] (II) This device may have been added with another device file.
    [ 24.318] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
    [ 24.318] (II) No input driver specified, ignoring this device.
    [ 24.318] (II) This device may have been added with another device file.
    [ 24.319] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event13)
    [ 24.319] (II) No input driver specified, ignoring this device.
    [ 24.319] (II) This device may have been added with another device file.
    [ 24.319] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
    [ 24.319] (II) No input driver specified, ignoring this device.
    [ 24.319] (II) This device may have been added with another device file.
    [ 24.319] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
    [ 24.319] (II) No input driver specified, ignoring this device.
    [ 24.319] (II) This device may have been added with another device file.
    [ 24.319] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
    [ 24.319] (II) No input driver specified, ignoring this device.
    [ 24.319] (II) This device may have been added with another device file.
    [ 24.319] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
    [ 24.319] (II) No input driver specified, ignoring this device.
    [ 24.319] (II) This device may have been added with another device file.
    [ 24.319] (II) config/udev: Adding input device UVC Camera (046d:09a1) (/dev/input/event5)
    [ 24.319] (**) UVC Camera (046d:09a1): Applying InputClass "evdev keyboard catchall"
    [ 24.319] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a1)'
    [ 24.319] (**) UVC Camera (046d:09a1): always reports core events
    [ 24.319] (**) evdev: UVC Camera (046d:09a1): Device: "/dev/input/event5"
    [ 24.319] (--) evdev: UVC Camera (046d:09a1): Vendor 0x46d Product 0x9a1
    [ 24.319] (--) evdev: UVC Camera (046d:09a1): Found keys
    [ 24.319] (II) evdev: UVC Camera (046d:09a1): Configuring as keyboard
    [ 24.319] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.3/6-1.3:1.0/input/input5/event5"
    [ 24.319] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a1)" (type: KEYBOARD, id 8)
    [ 24.319] (**) Option "xkb_rules" "evdev"
    [ 24.319] (**) Option "xkb_model" "evdev"
    [ 24.319] (**) Option "xkb_layout" "us"
    [ 24.320] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
    [ 24.320] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 24.320] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 24.320] (**) Logitech USB Receiver: always reports core events
    [ 24.320] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
    [ 24.320] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
    [ 24.320] (--) evdev: Logitech USB Receiver: Found keys
    [ 24.320] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 24.320] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/input/input3/event3"
    [ 24.320] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
    [ 24.320] (**) Option "xkb_rules" "evdev"
    [ 24.320] (**) Option "xkb_model" "evdev"
    [ 24.320] (**) Option "xkb_layout" "us"
    [ 24.320] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
    [ 24.320] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 24.320] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 24.320] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 24.320] (**) Logitech USB Receiver: always reports core events
    [ 24.320] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
    [ 24.320] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
    [ 24.320] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
    [ 24.320] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 24.320] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 24.320] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 24.320] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 24.320] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 24.320] (--) evdev: Logitech USB Receiver: Found keys
    [ 24.320] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 24.320] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 24.320] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 24.320] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 24.320] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 24.320] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.1/input/input4/event4"
    [ 24.320] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
    [ 24.320] (**) Option "xkb_rules" "evdev"
    [ 24.320] (**) Option "xkb_model" "evdev"
    [ 24.320] (**) Option "xkb_layout" "us"
    [ 24.320] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 24.320] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 24.320] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 24.320] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 24.320] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 24.320] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 24.320] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 24.320] (II) No input driver specified, ignoring this device.
    [ 24.320] (II) This device may have been added with another device file.
    [ 24.321] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event2)
    [ 24.321] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 24.321] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
    [ 24.321] (**) Eee PC WMI hotkeys: always reports core events
    [ 24.321] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event2"
    [ 24.321] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
    [ 24.321] (--) evdev: Eee PC WMI hotkeys: Found keys
    [ 24.321] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
    [ 24.321] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input2/event2"
    [ 24.321] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
    [ 24.321] (**) Option "xkb_rules" "evdev"
    [ 24.321] (**) Option "xkb_model" "evdev"
    [ 24.321] (**) Option "xkb_layout" "us"
    [ 24.497] (II) evdev: Power Button: Close
    [ 24.497] (II) UnloadModule: "evdev"
    [ 24.497] (II) evdev: Power Button: Close
    [ 24.497] (II) UnloadModule: "evdev"
    [ 24.497] (II) evdev: UVC Camera (046d:09a1): Close
    [ 24.497] (II) UnloadModule: "evdev"
    [ 24.497] (II) evdev: Logitech USB Receiver: Close
    [ 24.497] (II) UnloadModule: "evdev"
    [ 24.497] (II) evdev: Logitech USB Receiver: Close
    [ 24.497] (II) UnloadModule: "evdev"
    [ 24.497] (II) evdev: Eee PC WMI hotkeys: Close
    [ 24.497] (II) UnloadModule: "evdev"
    [ 24.680] Server terminated successfully (0). Closing log file.
    Contents of Xorg.conf:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 295.53 ([email protected]) Sat May 12 00:34:20 PDT 2012
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Last edited by Glupoi652 (2012-06-07 20:51:53)

    windscape wrote:
    wgetfree wrote:It may be a stupid question but do you have all the Xorg dependencies?
    It may even be simpler than that. If this is a new installation, a desktop environment or window manager may not be installed. In that case, the Xorg server has nothing to do. Install a desktop environment or window manager and see if Xorg continues running once it has something to do.
    Listen to this man. What I meant by Xorg dependencies is that people usually install xterm, xclock, etc so they have a very basic WM set up so they can see that Xorg is in fact working. Try setting up a .xinitrc with the following in it:
    exec startxfce4 --with-ck-launch
    Or even try to launch it manually with:
    $ startxfce4

  • No dead keys in Xorg, strange dead keys in virtual consoles

    Without touching my configs I'm having issues with the dead keys on my german keyboard:
    In applications under Xorg they are simply inactive (as if choosing a nodeadkeys-layout). In virtual consoles there is no character displayed when I double-tap a dead key (e.g. '~'), but it is indeed displayed if I press some other key afterwards. Strange thing here is that it is not combined with the second one like in the deadkeys-layout (e.g. à for pressing ` and then 'a').
    I do my Xorg layout via /etc/X11/xorg.conf.d/25-evdev.conf:
    Section "InputClass"
    Identifier "Logitech Illuminated Keyboard"
    MatchProduct "Logitech Illuminated Keyboard"
    Driver "evdev"
    Option "XkbLayout" "de"
    Option "XkbOptions" "terminate:ctrl_alt_bksp"
    EndSection
    According to /var/log/Xorg.0.log the layout seems to be set correctly:
    [ 39.725] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event2"
    [ 39.725] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
    [ 39.725] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
    [ 39.725] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
    [ 39.725] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input2/event2"
    [ 39.725] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 10)
    [ 39.725] (**) Option "xkb_rules" "evdev"
    [ 39.725] (**) Option "xkb_model" "evdev"
    [ 39.725] (**) Option "xkb_layout" "de"
    [ 39.725] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    I'm using an up-to-date pure-systemd install.
    Any suggestions how to trace down the issue?
    Thanks in advance,
    lynix
    Last edited by lynix (2012-10-10 21:21:26)

    I’ve the same behavior as you in virtual console, and I really don’t know why.
    For Xorg, check your .XCompose (recently I’ve a problem with a line only recognized by Xorg months later after I add it) or the Compose file of your locale in
    /usr/share/X11/locale/$your_locale.UTF-8/Compose
    However it seems en_US.UTF-8/Compose is used for many western languages (at least that seems to be the case for french).

  • Information on Strange scroll window needed

    I have a strange little window that pops up when scrolling in acrobat 8.2.1 (see upper right of image).  I've found it is activated by double clicking the mouse wheel.  What is this feature called?  I've looked throughout the preferences for anything like it.  I would like to permanently disable it so users don't accidentally double click their mouse wheel and turn it on.  Any help is appreciated.

    The fifteenth post on the search result page contains a defective link intended to point to Alancito's signature, which is an image on idisk.me.com. The working link doesn't request a password.
    Eric, it's this one, but won't trigger the message when viewed directly.
    (52375)

  • Xorg strange issue

    hello, this is sort of an oddball issue.  i did a system update the other day and ever since my Xorg server is acting weird.  whenever I start up my machine i am greeted with the sLiM login screen.  I log in and then nothing. just a blank black screen.  I switch over to tty1 and do sudo killall X.  X then restarts itself somehow and i finally get my desktop.  magic?  maybe try to reconfigure xorg?
    Also on an unrelated note.  sometimes when i boot my system complains about edd?  i have to add edd=off to the kernel line to get it to boot. any ideas?
    here is the error.
    thanks for the help

    You probably have "respawn" in /etc/inittab next to x:5:. That makes slim restart every time a session ends, which may be after logging out or after killing X. That's why X restarts when you kill it.
    Your problem seems to be that your DE has some problem that prevents from starting correctly the first time, but not the second. Perhaps there is some kind of race condition, but I'm lost at this point.

  • Intel log errors in Xorg.0.log

    My Xorg.0.log is filled every second or so with the following block and it gradually grows larger and larger (ten thousands of lines):
    [ 114.832] (II) intel(0): Printing DDC gathered Modelines:
    [ 114.832] (II) intel(0): Modeline "1280x800"x0.0 69.32 1280 1292 1356 1416 800 803 806 816 -hsync -vsync (49.0 kHz)
    [ 114.867] (II) intel(0): EDID vendor "SEC", prod id 19522
    Why is this? Is there some way to stop whatever intel function from doing so? Lately, I have experienced Xorg crashing for unknown reasons, but I don't know if it's related. I have both the intel-dri 7.11-1 package and xf86-video-intel 2.15.0-2 installed.
    Any advice would be helpful.
    Last edited by roygbiv (2011-09-05 14:12:01)

    Thanks, but it didn't change the matter. However, I'm getting more serious log errors:
    $ tail /var/log/Xorg.0.log
    [ 83.558] (II) intel(0): Modeline "1280x800"x0.0 69.32 1280 1292 1356 1416 800 803 806 816 -hsync -vsync (49.0 kHz)
    [ 2513.587] (EE) intel(0): [DRI2] DRI2SwapComplete: bad drawable
    [ 3343.637] (EE) intel(0): [DRI2] DRI2SwapComplete: bad drawable
    [ 5166.039] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 5176.719] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 5176.719] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 5176.729] (II) intel(0): EDID vendor "SEC", prod id 19522
    [ 5176.729] (II) intel(0): Printing DDC gathered Modelines:
    [ 5176.729] (II) intel(0): Modeline "1280x800"x0.0 69.32 1280 1292 1356 1416 800 803 806 816 -hsync -vsync (49.0 kHz)
    [ 5176.770] (--) SynPS/2 Synaptics TouchPad: touchpad found
    My daemons:
    DAEMONS=(syslog-ng dbus netfs ntpd crond acpid wicd alsa laptop-mode !slim)
    I have googled this "bad drawable" issue but no solutions are out there. AFAIK this is the reason for my Xorg strange behaviour. Any similar experience, or maybe suggestions to share with me, guys/girls? What logs or configs should I post here?
    Last edited by roygbiv (2011-09-05 14:24:01)

  • [SOLVED]Two finger scrolling/tapping stoped working after xorg update

    Hi everyone, i updated my system yesterday to the new xorg server (1.11.1-2). Everything works except for the two finger scrolling on my synaptics touchpad.
    There is some info:
    Kernel:  3.0.6-2 (stock)
    Synaptics Touchpad driver: 1.5.0-1 (lastest)
    Right side scrolling works fine, two or three finger tapping doesn't work either.
    Here's my Xorg.log:
    [ 172.989]
    X.Org X Server 1.11.1
    Release Date: 2011-09-24
    [ 172.989] X Protocol Version 11, Revision 0
    [ 172.989] Build Operating System: Linux 3.0-ARCH i686
    [ 172.989] Current Operating System: Linux Xenogears 3.0-ARCH #1 SMP PREEMPT Fri Oct 7 10:11:05 UTC 2011 i686
    [ 172.989] Kernel command line: root=/dev/sda2 ro quiet fastboot init=/sbin/e4rat-preload
    [ 172.989] Build Date: 10 October 2011 08:49:15AM
    [ 172.989]
    [ 172.989] Current version of pixman: 0.22.2
    [ 172.989] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 172.990] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 172.990] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 13 13:27:22 2011
    [ 172.990] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 172.990] (==) No Layout section. Using the first Screen section.
    [ 172.990] (==) No screen section available. Using defaults.
    [ 172.990] (**) |-->Screen "Default Screen Section" (0)
    [ 172.990] (**) | |-->Monitor "<default monitor>"
    [ 172.990] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 172.990] (==) Automatically adding devices
    [ 172.990] (==) Automatically enabling devices
    [ 172.991] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 172.991] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 172.991] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 172.991] (II) Loader magic: 0x8228580
    [ 172.991] (II) Module ABI versions:
    [ 172.991] X.Org ANSI C Emulation: 0.4
    [ 172.991] X.Org Video Driver: 11.0
    [ 172.991] X.Org XInput driver : 13.0
    [ 172.991] X.Org Server Extension : 6.0
    [ 172.992] (--) PCI:*(0:1:5:0) 1002:791f:1631:c108 rev 0, Mem @ 0xc0000000/268435456, 0xfd8f0000/65536, 0xfd700000/1048576, I/O @ 0x00008800/256
    [ 172.992] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 172.992] (II) LoadModule: "extmod"
    [ 172.993] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 172.993] (II) Module extmod: vendor="X.Org Foundation"
    [ 172.993] compiled for 1.11.1, module version = 1.0.0
    [ 172.993] Module class: X.Org Server Extension
    [ 172.993] ABI class: X.Org Server Extension, version 6.0
    [ 172.993] (II) Loading extension MIT-SCREEN-SAVER
    [ 172.993] (II) Loading extension XFree86-VidModeExtension
    [ 172.993] (II) Loading extension XFree86-DGA
    [ 172.993] (II) Loading extension DPMS
    [ 172.993] (II) Loading extension XVideo
    [ 172.993] (II) Loading extension XVideo-MotionCompensation
    [ 172.993] (II) Loading extension X-Resource
    [ 172.993] (II) LoadModule: "dbe"
    [ 172.993] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 172.993] (II) Module dbe: vendor="X.Org Foundation"
    [ 172.993] compiled for 1.11.1, module version = 1.0.0
    [ 172.993] Module class: X.Org Server Extension
    [ 172.993] ABI class: X.Org Server Extension, version 6.0
    [ 172.994] (II) Loading extension DOUBLE-BUFFER
    [ 172.994] (II) LoadModule: "glx"
    [ 172.994] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 172.994] (II) Module glx: vendor="X.Org Foundation"
    [ 172.994] compiled for 1.11.1, module version = 1.0.0
    [ 172.994] ABI class: X.Org Server Extension, version 6.0
    [ 172.994] (==) AIGLX enabled
    [ 172.994] (II) Loading extension GLX
    [ 172.994] (II) LoadModule: "record"
    [ 172.994] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 172.994] (II) Module record: vendor="X.Org Foundation"
    [ 172.994] compiled for 1.11.1, module version = 1.13.0
    [ 172.994] Module class: X.Org Server Extension
    [ 172.994] ABI class: X.Org Server Extension, version 6.0
    [ 172.994] (II) Loading extension RECORD
    [ 172.994] (II) LoadModule: "dri"
    [ 172.994] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 172.995] (II) Module dri: vendor="X.Org Foundation"
    [ 172.995] compiled for 1.11.1, module version = 1.0.0
    [ 172.995] ABI class: X.Org Server Extension, version 6.0
    [ 172.995] (II) Loading extension XFree86-DRI
    [ 172.995] (II) LoadModule: "dri2"
    [ 172.995] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 172.995] (II) Module dri2: vendor="X.Org Foundation"
    [ 172.995] compiled for 1.11.1, module version = 1.2.0
    [ 172.995] ABI class: X.Org Server Extension, version 6.0
    [ 172.995] (II) Loading extension DRI2
    [ 172.995] (==) Matched ati as autoconfigured driver 0
    [ 172.995] (==) Matched vesa as autoconfigured driver 1
    [ 172.995] (==) Matched fbdev as autoconfigured driver 2
    [ 172.995] (==) Assigned the driver to the xf86ConfigLayout
    [ 172.995] (II) LoadModule: "ati"
    [ 172.995] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 172.995] (II) Module ati: vendor="X.Org Foundation"
    [ 172.995] compiled for 1.11.0, module version = 6.14.2
    [ 172.995] Module class: X.Org Video Driver
    [ 172.995] ABI class: X.Org Video Driver, version 11.0
    [ 172.995] (II) LoadModule: "radeon"
    [ 172.996] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 172.996] (II) Module radeon: vendor="X.Org Foundation"
    [ 172.996] compiled for 1.11.0, module version = 6.14.2
    [ 172.996] Module class: X.Org Video Driver
    [ 172.996] ABI class: X.Org Video Driver, version 11.0
    [ 172.996] (II) LoadModule: "vesa"
    [ 172.996] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 172.996] (II) Module vesa: vendor="X.Org Foundation"
    [ 172.996] compiled for 1.10.99.902, module version = 2.3.0
    [ 172.996] Module class: X.Org Video Driver
    [ 172.996] ABI class: X.Org Video Driver, version 11.0
    [ 172.996] (II) LoadModule: "fbdev"
    [ 172.997] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 172.997] (II) Module fbdev: vendor="X.Org Foundation"
    [ 172.997] compiled for 1.10.99.902, module version = 0.4.2
    [ 172.997] ABI class: X.Org Video Driver, version 11.0
    [ 172.997] (II) RADEON: Driver for ATI Radeon chipsets:
    ********************LOTS OF VIDEO CARDS*******************************
    [ 173.004] (II) VESA: driver for VESA chipsets: vesa
    [ 173.004] (II) FBDEV: driver for framebuffer: fbdev
    [ 173.004] (++) using VT number 8
    [ 173.015] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 173.015] (II) [KMS] Kernel modesetting enabled.
    [ 173.015] (WW) Falling back to old probe method for vesa
    [ 173.015] (WW) Falling back to old probe method for fbdev
    [ 173.015] (II) Loading sub module "fbdevhw"
    [ 173.015] (II) LoadModule: "fbdevhw"
    [ 173.016] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 173.016] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 173.016] compiled for 1.11.1, module version = 0.0.2
    [ 173.016] ABI class: X.Org Video Driver, version 11.0
    [ 173.016] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 173.016] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 173.016] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 173.016] (==) RADEON(0): Default visual is TrueColor
    [ 173.016] (==) RADEON(0): RGB weight 888
    [ 173.016] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 173.016] (--) RADEON(0): Chipset: "ATI Radeon X1200" (ChipID = 0x791f)
    [ 173.016] (II) RADEON(0): PCI card detected
    [ 173.016] drmOpenDevice: node name is /dev/dri/card0
    [ 173.016] drmOpenDevice: open result is 9, (OK)
    [ 173.016] drmOpenByBusid: Searching for BusID pci:0000:01:05.0
    [ 173.016] drmOpenDevice: node name is /dev/dri/card0
    [ 173.016] drmOpenDevice: open result is 9, (OK)
    [ 173.016] drmOpenByBusid: drmOpenMinor returns 9
    [ 173.016] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
    [ 173.017] (II) Loading sub module "exa"
    [ 173.017] (II) LoadModule: "exa"
    [ 173.017] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 173.017] (II) Module exa: vendor="X.Org Foundation"
    [ 173.017] compiled for 1.11.1, module version = 2.5.0
    [ 173.017] ABI class: X.Org Video Driver, version 11.0
    [ 173.017] (II) RADEON(0): KMS Color Tiling: enabled
    [ 173.017] (II) RADEON(0): KMS Pageflipping: enabled
    [ 173.017] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 173.190] (II) RADEON(0): Output VGA-0 has no monitor section
    [ 173.190] (II) RADEON(0): Output LVDS has no monitor section
    [ 173.356] (II) RADEON(0): EDID for output VGA-0
    [ 173.356] (II) RADEON(0): EDID for output LVDS
    [ 173.356] (II) RADEON(0): Manufacturer: AUO Model: 8174 Serial#: 0
    [ 173.356] (II) RADEON(0): Year: 2006 Week: 1
    [ 173.356] (II) RADEON(0): EDID Version: 1.3
    [ 173.356] (II) RADEON(0): Digital Display Input
    [ 173.356] (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
    [ 173.357] (II) RADEON(0): Gamma: 2.20
    [ 173.357] (II) RADEON(0): No DPMS capabilities specified
    [ 173.357] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 173.357] (II) RADEON(0): First detailed timing is preferred mode
    [ 173.357] (II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
    [ 173.357] (II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
    [ 173.357] (II) RADEON(0): Manufacturer's mask: 0
    [ 173.357] (II) RADEON(0): Supported detailed timing:
    [ 173.357] (II) RADEON(0): clock: 71.1 MHz Image Size: 331 x 207 mm
    [ 173.357] (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
    [ 173.357] (II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
    [ 173.357] (II) RADEON(0): Unknown vendor-specific block f
    [ 173.357] (II) RADEON(0): AUO
    [ 173.357] (II) RADEON(0): B154EW08 V1
    [ 173.357] (II) RADEON(0): EDID (in hex):
    [ 173.357] (II) RADEON(0): 00ffffffffffff0006af748100000000
    [ 173.357] (II) RADEON(0): 01100103802115780a1cf59758508e27
    [ 173.357] (II) RADEON(0): 27505400000001010101010101010101
    [ 173.357] (II) RADEON(0): 010101010101c71b00a0502017303020
    [ 173.357] (II) RADEON(0): 36004bcf100000180000000f00000000
    [ 173.357] (II) RADEON(0): 00000000000000000020000000fe0041
    [ 173.357] (II) RADEON(0): 554f0a202020202020202020000000fe
    [ 173.357] (II) RADEON(0): 004231353445573038205631200a0043
    [ 173.357] (II) RADEON(0): Printing probed modes for output LVDS
    [ 173.357] (II) RADEON(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
    [ 173.357] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
    [ 173.357] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
    [ 173.357] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
    [ 173.357] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
    [ 173.357] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
    [ 173.357] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
    [ 173.357] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
    [ 173.357] (II) RADEON(0): Output VGA-0 disconnected
    [ 173.357] (II) RADEON(0): Output LVDS connected
    [ 173.357] (II) RADEON(0): Using exact sizes for initial modes
    [ 173.357] (II) RADEON(0): Output LVDS using initial mode 1280x800
    [ 173.357] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 173.357] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fbd8000
    [ 173.357] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 173.357] (==) RADEON(0): DPI set to (96, 96)
    [ 173.357] (II) Loading sub module "fb"
    [ 173.357] (II) LoadModule: "fb"
    [ 173.358] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 173.358] (II) Module fb: vendor="X.Org Foundation"
    [ 173.358] compiled for 1.11.1, module version = 1.0.0
    [ 173.358] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 173.358] (II) Loading sub module "ramdac"
    [ 173.358] (II) LoadModule: "ramdac"
    [ 173.358] (II) Module "ramdac" already built-in
    [ 173.358] (II) UnloadModule: "vesa"
    [ 173.358] (II) Unloading vesa
    [ 173.358] (II) UnloadModule: "fbdev"
    [ 173.358] (II) Unloading fbdev
    [ 173.358] (II) UnloadModule: "fbdevhw"
    [ 173.358] (II) Unloading fbdevhw
    [ 173.358] (--) Depth 24 pixmap format is 32 bpp
    [ 173.358] (II) RADEON(0): [DRI2] Setup complete
    [ 173.358] (II) RADEON(0): [DRI2] DRI driver: r300
    [ 173.359] (II) RADEON(0): Front buffer size: 4000K
    [ 173.359] (II) RADEON(0): VRAM usage limit set to 228499K
    [ 173.359] (==) RADEON(0): Backing store disabled
    [ 173.359] (II) RADEON(0): Direct rendering enabled
    [ 173.359] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
    [ 173.359] (II) RADEON(0): Setting EXA maxPitchBytes
    [ 173.359] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 173.359] (II) EXA(0): Driver registered support for the following operations:
    [ 173.359] (II) Solid
    [ 173.359] (II) Copy
    [ 173.359] (II) Composite (RENDER acceleration)
    [ 173.359] (II) UploadToScreen
    [ 173.359] (II) DownloadFromScreen
    [ 173.359] (II) RADEON(0): Acceleration enabled
    [ 173.359] (==) RADEON(0): DPMS enabled
    [ 173.359] (==) RADEON(0): Silken mouse enabled
    [ 173.359] (II) RADEON(0): Set up textured video
    [ 173.359] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 173.359] (--) RandR disabled
    [ 173.359] (II) Initializing built-in extension Generic Event Extension
    [ 173.359] (II) Initializing built-in extension SHAPE
    [ 173.360] (II) Initializing built-in extension MIT-SHM
    [ 173.360] (II) Initializing built-in extension XInputExtension
    [ 173.360] (II) Initializing built-in extension XTEST
    [ 173.360] (II) Initializing built-in extension BIG-REQUESTS
    [ 173.360] (II) Initializing built-in extension SYNC
    [ 173.360] (II) Initializing built-in extension XKEYBOARD
    [ 173.360] (II) Initializing built-in extension XC-MISC
    [ 173.360] (II) Initializing built-in extension SECURITY
    [ 173.360] (II) Initializing built-in extension XINERAMA
    [ 173.360] (II) Initializing built-in extension XFIXES
    [ 173.360] (II) Initializing built-in extension RENDER
    [ 173.360] (II) Initializing built-in extension RANDR
    [ 173.360] (II) Initializing built-in extension COMPOSITE
    [ 173.360] (II) Initializing built-in extension DAMAGE
    [ 173.378] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 173.378] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 173.378] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 173.378] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 173.378] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 173.379] (II) AIGLX: Loaded and initialized r300
    [ 173.379] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 173.380] (II) RADEON(0): Setting screen physical size to 338 x 211
    [ 173.458] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 173.458] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 173.458] (II) LoadModule: "evdev"
    [ 173.458] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 173.459] (II) Module evdev: vendor="X.Org Foundation"
    [ 173.459] compiled for 1.10.99.902, module version = 2.6.0
    [ 173.459] Module class: X.Org XInput Driver
    [ 173.459] ABI class: X.Org XInput driver, version 13.0
    [ 173.459] (II) Using input driver 'evdev' for 'Power Button'
    [ 173.459] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 173.459] (**) Power Button: always reports core events
    [ 173.459] (**) Power Button: Device: "/dev/input/event4"
    [ 173.459] (--) Power Button: Found keys
    [ 173.459] (II) Power Button: Configuring as keyboard
    [ 173.459] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 173.459] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 173.459] (**) Option "xkb_rules" "evdev"
    [ 173.459] (**) Option "xkb_model" "evdev"
    [ 173.459] (**) Option "xkb_layout" "us"
    [ 173.497] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    [ 173.497] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 173.497] (II) Using input driver 'evdev' for 'Video Bus'
    [ 173.497] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 173.497] (**) Video Bus: always reports core events
    [ 173.497] (**) Video Bus: Device: "/dev/input/event5"
    [ 173.497] (--) Video Bus: Found keys
    [ 173.497] (II) Video Bus: Configuring as keyboard
    [ 173.497] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input5/event5"
    [ 173.497] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 173.497] (**) Option "xkb_rules" "evdev"
    [ 173.497] (**) Option "xkb_model" "evdev"
    [ 173.497] (**) Option "xkb_layout" "us"
    [ 173.498] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 173.498] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 173.498] (II) Using input driver 'evdev' for 'Power Button'
    [ 173.498] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 173.498] (**) Power Button: always reports core events
    [ 173.498] (**) Power Button: Device: "/dev/input/event1"
    [ 173.498] (--) Power Button: Found keys
    [ 173.498] (II) Power Button: Configuring as keyboard
    [ 173.498] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
    [ 173.498] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 173.498] (**) Option "xkb_rules" "evdev"
    [ 173.498] (**) Option "xkb_model" "evdev"
    [ 173.498] (**) Option "xkb_layout" "us"
    [ 173.499] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 173.499] (II) No input driver/identifier specified (ignoring)
    [ 173.499] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 173.499] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 173.499] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 173.499] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 173.499] (**) Sleep Button: always reports core events
    [ 173.500] (**) Sleep Button: Device: "/dev/input/event2"
    [ 173.500] (--) Sleep Button: Found keys
    [ 173.500] (II) Sleep Button: Configuring as keyboard
    [ 173.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
    [ 173.500] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 173.500] (**) Option "xkb_rules" "evdev"
    [ 173.500] (**) Option "xkb_model" "evdev"
    [ 173.500] (**) Option "xkb_layout" "us"
    [ 173.501] (II) config/udev: Adding input device CNF7050 (/dev/input/event10)
    [ 173.501] (**) CNF7050: Applying InputClass "evdev keyboard catchall"
    [ 173.501] (II) Using input driver 'evdev' for 'CNF7050'
    [ 173.501] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 173.501] (**) CNF7050: always reports core events
    [ 173.501] (**) CNF7050: Device: "/dev/input/event10"
    [ 173.501] (--) CNF7050: Found keys
    [ 173.501] (II) CNF7050: Configuring as keyboard
    [ 173.501] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.5/usb1/1-7/1-7:1.0/input/input10/event10"
    [ 173.501] (II) XINPUT: Adding extended input device "CNF7050" (type: KEYBOARD, id 10)
    [ 173.501] (**) Option "xkb_rules" "evdev"
    [ 173.501] (**) Option "xkb_model" "evdev"
    [ 173.501] (**) Option "xkb_layout" "us"
    [ 173.502] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
    [ 173.502] (II) No input driver/identifier specified (ignoring)
    [ 173.502] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event6)
    [ 173.502] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
    [ 173.502] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
    [ 173.502] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 173.502] (**) Asus Laptop extra buttons: always reports core events
    [ 173.502] (**) Asus Laptop extra buttons: Device: "/dev/input/event6"
    [ 173.502] (--) Asus Laptop extra buttons: Found keys
    [ 173.502] (II) Asus Laptop extra buttons: Configuring as keyboard
    [ 173.502] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input6/event6"
    [ 173.502] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 11)
    [ 173.502] (**) Option "xkb_rules" "evdev"
    [ 173.502] (**) Option "xkb_model" "evdev"
    [ 173.502] (**) Option "xkb_layout" "us"
    [ 173.503] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 173.503] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 173.503] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 173.503] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 173.503] (**) AT Translated Set 2 keyboard: always reports core events
    [ 173.503] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 173.503] (--) AT Translated Set 2 keyboard: Found keys
    [ 173.503] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 173.503] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 173.503] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
    [ 173.503] (**) Option "xkb_rules" "evdev"
    [ 173.503] (**) Option "xkb_model" "evdev"
    [ 173.504] (**) Option "xkb_layout" "us"
    [ 173.504] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
    [ 173.504] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 173.504] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 173.504] (II) LoadModule: "synaptics"
    [ 173.505] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 173.505] (II) Module synaptics: vendor="X.Org Foundation"
    [ 173.505] compiled for 1.11.0, module version = 1.5.0
    [ 173.505] Module class: X.Org XInput Driver
    [ 173.505] ABI class: X.Org XInput driver, version 13.0
    [ 173.505] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 173.505] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 173.505] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 173.505] (**) Option "Device" "/dev/input/event9"
    [ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    [ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    [ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    [ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
    [ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 173.716] (**) Option "TapButton1" "1"
    [ 173.716] (**) Option "TapButton2" "2"
    [ 173.716] (**) Option "TapButton3" "3"
    [ 173.823] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 173.823] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 173.930] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input9/event9"
    [ 173.930] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
    [ 173.930] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 173.930] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 173.930] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
    [ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 173.930] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 173.930] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 173.930] (II) No input driver/identifier specified (ignoring)
    [ 173.931] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
    [ 173.931] (II) No input driver/identifier specified (ignoring)
    [ 180.276] (II) RADEON(0): EDID vendor "AUO", prod id 33140
    [ 180.276] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 180.276] (II) RADEON(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
    [ 183.590] (II) RADEON(0): EDID vendor "AUO", prod id 33140
    [ 183.590] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 183.590] (II) RADEON(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
    I deteled the part where it lists all the suported video cards...
    Thanks in advance.
    Last edited by Hyugga (2011-10-20 06:46:11)

    Same problem here
    Worked like a charm before.
    /etc/X11/xorg.conf
    # NOXORGCONFEXISTED: No X.org configuration file existed when this backup was created.
    /etc/X11/xorg.conf.d/10-evdev.conf
    # Catch-all evdev loader for udev-based systems
    # We don't simply match on any device since that also adds accelerometers
    # and other devices that we don't really want to use. The list below
    # matches everything but joysticks.
    Section "InputClass"
    Identifier "evdev pointer catchall"
    MatchIsPointer "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev keyboard catchall"
    MatchIsKeyboard "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    Option "XkbLayout" "de"
    Option "XkbVariant" "nodeadkeys"
    EndSection
    Section "InputClass"
    Identifier "evdev touchpad catchall"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev tablet catchall"
    MatchIsTablet "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev touchscreen catchall"
    MatchIsTouchscreen "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    /etc/X11/xorg.conf.d/10-synaptics.conf
    Section "InputClass"
    Identifier "touchpad catchall"
    Driver "synaptics"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Option "TapButton1" "1"
    Option "TapButton2" "2"
    Option "TapButton3" "3"
    EndSection
    Xorg log
    [ 90.424] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
    [ 90.424] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 90.424] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 90.424] (II) LoadModule: "synaptics"
    [ 90.424] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 90.424] (II) Module synaptics: vendor="X.Org Foundation"
    [ 90.424] compiled for 1.11.0, module version = 1.5.0
    [ 90.424] Module class: X.Org XInput Driver
    [ 90.424] ABI class: X.Org XInput driver, version 13.0
    [ 90.424] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 90.424] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 90.424] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 90.424] (**) Option "Device" "/dev/input/event6"
    [ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5598
    [ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4670
    [ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    [ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
    [ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 90.500] (**) Option "TapButton1" "1"
    [ 90.500] (**) Option "TapButton2" "2"
    [ 90.500] (**) Option "TapButton3" "3"
    [ 90.532] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 90.532] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 90.564] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
    [ 90.564] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
    [ 90.564] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 90.564] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 90.564] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
    [ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 90.564] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 90.564] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 90.564] (II) No input driver/identifier specified (ignoring)
    Last edited by akurei (2011-10-14 10:28:45)

  • [solved] Touchpad scrolling and tapping stops working after Xorg 1.9

    Hi all,
    My laptop is an Acer Extensa 5630EZ and it has been running for over a year with Arch without problems. However, since the xorg 1.9 upgrade the touchpad edge scrolling just randomly stops working. Everything else continues working fine. I have searched the forums and Googled but haven't found anything that fixes it. Logging out and back into KDE gets the scrolling working again (X restart I guess). I'm pretty much stumped for ideas. Please help!
    [edit]
    - I edited the title for a more accurate description
    - I noticed that tapping also stops working
    - Note that it initially works but then randomly stops... as opposed to others' where it does not work at all.
    /etc/X11/xorg.conf.d/10-synaptics.conf
    $ cat /etc/X11/xorg.conf.d/10-synaptics.conf
    Section "InputClass"
    Identifier "touchpad catchall"
    Driver "synaptics"
    MatchIsTouchpad "on"
    Option "TapButton1" "1"
    Option "TapButton2" "2"
    Option "TapButton3" "3"
    Option "VertEdgeScroll" "on"
    Option "VertTwoFingerScroll" "on"
    Option "CornerCoasting" "1"
    Option "RBCornerButton" "3"
    Option "LTCornerButton" "2"
    Option "CoastingSpeed" "0.5"
    Option "CoastingFriction" "0"
    Option "EmulateTwoFingerMinZ" "40"
    Option "EmulateTwoFingerMinW" "5"
    EndSection
    /etc/X11/xorg.conf.d/10-evdev.conf
    $ cat /etc/X11/xorg.conf.d/10-evdev.conf
    # Catch-all evdev loader for udev-based systems
    # We don't simply match on any device since that also adds accelerometers
    # and other devices that we don't really want to use. The list below
    # matches everything but joysticks.
    Section "InputClass"
    Identifier "evdev pointer catchall"
    MatchIsPointer "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev keyboard catchall"
    MatchIsKeyboard "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev touchpad catchall"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev tablet catchall"
    MatchIsTablet "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev touchscreen catchall"
    MatchIsTouchscreen "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    touchpad part of X log
    [ 36091.108] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event5)
    [ 36091.108] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
    [ 36091.108] (**) PS/2 Mouse: always reports core events
    [ 36091.108] (**) PS/2 Mouse: Device: "/dev/input/event5"
    [ 36091.120] (--) PS/2 Mouse: Found 3 mouse buttons
    [ 36091.120] (--) PS/2 Mouse: Found relative axes
    [ 36091.120] (--) PS/2 Mouse: Found x and y relative axes
    [ 36091.120] (II) PS/2 Mouse: Configuring as mouse
    [ 36091.120] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
    [ 36091.120] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 36091.120] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
    [ 36091.120] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
    [ 36091.120] (**) PS/2 Mouse: (accel) acceleration profile 0
    [ 36091.120] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
    [ 36091.120] (**) PS/2 Mouse: (accel) acceleration threshold: 4
    [ 36091.120] (II) PS/2 Mouse: initialized for relative axes.
    [ 36091.121] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
    [ 36091.121] (II) No input driver/identifier specified (ignoring)
    [ 36091.121] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
    [ 36091.121] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
    [ 36091.121] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
    [ 36091.121] (II) LoadModule: "synaptics"
    [ 36091.122] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 36091.130] (II) Module synaptics: vendor="X.Org Foundation"
    [ 36091.130] compiled for 1.9.0, module version = 1.3.0
    [ 36091.130] Module class: X.Org XInput Driver
    [ 36091.130] ABI class: X.Org XInput driver, version 11.0
    [ 36091.130] (II) Synaptics touchpad driver version 1.3.0
    [ 36091.130] (**) Option "Device" "/dev/input/event6"
    [ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
    [ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
    [ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
    [ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
    [ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
    [ 36091.249] (**) Option "EmulateTwoFingerMinZ" "40"
    [ 36091.249] (**) Option "EmulateTwoFingerMinW" "5"
    [ 36091.249] (**) Option "VertEdgeScroll" "on"
    [ 36091.249] (**) Option "CornerCoasting" "1"
    [ 36091.250] (**) Option "VertTwoFingerScroll" "on"
    [ 36091.250] (**) Option "RBCornerButton" "3"
    [ 36091.250] (**) Option "LTCornerButton" "2"
    [ 36091.250] (**) Option "TapButton1" "1"
    [ 36091.250] (**) Option "TapButton2" "2"
    [ 36091.250] (**) Option "TapButton3" "3"
    [ 36091.250] (**) Option "CoastingSpeed" "0.5"
    [ 36091.250] (**) Option "CoastingFriction" "0"
    [ 36091.349] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 36091.349] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    [ 36091.416] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
    [ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
    [ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
    [ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
    [ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
    [ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
    [ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
    [ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
    [ 36091.459] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 36091.460] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
    [ 36091.460] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
    [ 36091.460] (II) Synaptics touchpad driver version 1.3.0
    [ 36091.856] (EE) AlpsPS/2 ALPS GlidePoint no synaptics event device found
    [ 36091.905] (**) Option "Device" "/dev/input/mouse1"
    [ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid x-axis range. defaulting to 1615 - 5685
    [ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid y-axis range. defaulting to 1729 - 4171
    [ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid pressure range. defaulting to 0 - 256
    [ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
    [ 36091.916] (**) Option "EmulateTwoFingerMinZ" "40"
    [ 36091.916] (**) Option "EmulateTwoFingerMinW" "5"
    [ 36091.916] (**) Option "VertEdgeScroll" "on"
    [ 36091.916] (**) Option "CornerCoasting" "1"
    [ 36091.916] (**) Option "VertTwoFingerScroll" "on"
    [ 36091.916] (**) Option "RBCornerButton" "3"
    [ 36091.916] (**) Option "LTCornerButton" "2"
    [ 36091.916] (**) Option "TapButton1" "1"
    [ 36091.916] (**) Option "TapButton2" "2"
    [ 36091.916] (**) Option "TapButton3" "3"
    [ 36091.916] (**) Option "CoastingSpeed" "0.5"
    [ 36091.916] (**) Option "CoastingFriction" "0"
    [ 36091.937] (EE) Query no Synaptics: 6003C8
    [ 36091.937] (--) AlpsPS/2 ALPS GlidePoint: no supported touchpad found
    [ 36091.937] (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
    [ 36091.979] (EE) PreInit failed for input device "AlpsPS/2 ALPS GlidePoint"
    [ 36091.979] (II) UnloadModule: "synaptics"
    [ 36101.679] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 36101.679] (II) intel(0): Printing DDC gathered Modelines:
    [ 36101.679] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 36113.812] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 36113.813] (II) intel(0): Printing DDC gathered Modelines:
    [ 36113.813] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    Last edited by drsjlazar (2010-10-13 14:46:44)

    I know about Google's Linux search but I hardly use it... I just add Linux to my search terms. Thanks for the reminder though.
    My laptop is an Acer Extensa 5630EZ with an ALPS 'GlidePoint' touchpad.
    Searching for problems that seem related to mine does not bring up much. Xorg 1.9 being new is probably the reason. I have gone through the updated installation guide and tried to get everything in order. Some pages recommend HAL, Xorg does not. But without HAL, I have no suspend/hibernate option in KDE and VMWare will not work. The problem appears even if I run DBus only without HAL. So I've decided to to just run HAL.
    I have removed all the extra stuff I don't need at startup. Most notable is syndaemon in bashrc (totally forgot I had that). I have to wait for it to stop working since it is unpredictable. Though, I have noticed that it seems to stop working when I use keyboard shortcuts/combinations.
    Here is my entire Xorg log after it stopped working:
    [ 45238.439]
    X.Org X Server 1.9.0
    Release Date: 2010-08-20
    [ 45238.439] X Protocol Version 11, Revision 0
    [ 45238.439] Build Operating System: Linux 2.6.34-ARCH x86_64
    [ 45238.439] Current Operating System: Linux extensa-arch 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 08:45:18 CEST 2010 x86_64
    [ 45238.439] Kernel command line: root=/dev/mapper/AllPartitions-ArchRoot ro quiet splash
    [ 45238.439] Build Date: 24 August 2010 01:44:37PM
    [ 45238.439]
    [ 45238.439] Current version of pixman: 0.18.4
    [ 45238.439] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 45238.439] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 45238.439] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 7 11:41:07 2010
    [ 45238.439] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 45238.439] (==) No Layout section. Using the first Screen section.
    [ 45238.439] (==) No screen section available. Using defaults.
    [ 45238.439] (**) |-->Screen "Default Screen Section" (0)
    [ 45238.439] (**) | |-->Monitor "<default monitor>"
    [ 45238.440] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 45238.440] (==) Automatically adding devices
    [ 45238.440] (==) Automatically enabling devices
    [ 45238.440] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 45238.440] Entry deleted from font path.
    [ 45238.440] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 45238.440] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 45238.440] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 45238.440] (II) Loader magic: 0x7d4880
    [ 45238.440] (II) Module ABI versions:
    [ 45238.440] X.Org ANSI C Emulation: 0.4
    [ 45238.440] X.Org Video Driver: 8.0
    [ 45238.440] X.Org XInput driver : 11.0
    [ 45238.440] X.Org Server Extension : 4.0
    [ 45238.441] (--) PCI:*(0:0:2:0) 8086:2a42:1025:013c rev 9, Mem @ 0xf4000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
    [ 45238.441] (--) PCI: (0:0:2:1) 8086:2a43:1025:013c rev 9, Mem @ 0xf4400000/1048576
    [ 45238.441] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 45238.441] (II) LoadModule: "extmod"
    [ 45238.441] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 45238.441] (II) Module extmod: vendor="X.Org Foundation"
    [ 45238.441] compiled for 1.9.0, module version = 1.0.0
    [ 45238.441] Module class: X.Org Server Extension
    [ 45238.441] ABI class: X.Org Server Extension, version 4.0
    [ 45238.441] (II) Loading extension MIT-SCREEN-SAVER
    [ 45238.441] (II) Loading extension XFree86-VidModeExtension
    [ 45238.441] (II) Loading extension XFree86-DGA
    [ 45238.441] (II) Loading extension DPMS
    [ 45238.441] (II) Loading extension XVideo
    [ 45238.441] (II) Loading extension XVideo-MotionCompensation
    [ 45238.441] (II) Loading extension X-Resource
    [ 45238.441] (II) LoadModule: "dbe"
    [ 45238.441] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 45238.441] (II) Module dbe: vendor="X.Org Foundation"
    [ 45238.441] compiled for 1.9.0, module version = 1.0.0
    [ 45238.442] Module class: X.Org Server Extension
    [ 45238.442] ABI class: X.Org Server Extension, version 4.0
    [ 45238.442] (II) Loading extension DOUBLE-BUFFER
    [ 45238.442] (II) LoadModule: "glx"
    [ 45238.442] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 45238.442] (II) Module glx: vendor="X.Org Foundation"
    [ 45238.442] compiled for 1.9.0, module version = 1.0.0
    [ 45238.442] ABI class: X.Org Server Extension, version 4.0
    [ 45238.442] (==) AIGLX enabled
    [ 45238.442] (II) Loading extension GLX
    [ 45238.442] (II) LoadModule: "record"
    [ 45238.442] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 45238.442] (II) Module record: vendor="X.Org Foundation"
    [ 45238.442] compiled for 1.9.0, module version = 1.13.0
    [ 45238.442] Module class: X.Org Server Extension
    [ 45238.442] ABI class: X.Org Server Extension, version 4.0
    [ 45238.442] (II) Loading extension RECORD
    [ 45238.442] (II) LoadModule: "dri"
    [ 45238.442] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 45238.443] (II) Module dri: vendor="X.Org Foundation"
    [ 45238.443] compiled for 1.9.0, module version = 1.0.0
    [ 45238.443] ABI class: X.Org Server Extension, version 4.0
    [ 45238.443] (II) Loading extension XFree86-DRI
    [ 45238.443] (II) LoadModule: "dri2"
    [ 45238.443] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 45238.443] (II) Module dri2: vendor="X.Org Foundation"
    [ 45238.443] compiled for 1.9.0, module version = 1.2.0
    [ 45238.443] ABI class: X.Org Server Extension, version 4.0
    [ 45238.443] (II) Loading extension DRI2
    [ 45238.443] (==) Matched intel as autoconfigured driver 0
    [ 45238.443] (==) Matched vesa as autoconfigured driver 1
    [ 45238.443] (==) Matched fbdev as autoconfigured driver 2
    [ 45238.443] (==) Assigned the driver to the xf86ConfigLayout
    [ 45238.443] (II) LoadModule: "intel"
    [ 45238.443] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 45238.443] (II) Module intel: vendor="X.Org Foundation"
    [ 45238.443] compiled for 1.9.0, module version = 2.12.0
    [ 45238.443] Module class: X.Org Video Driver
    [ 45238.443] ABI class: X.Org Video Driver, version 8.0
    [ 45238.443] (II) LoadModule: "vesa"
    [ 45238.443] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 45238.444] (II) Module vesa: vendor="X.Org Foundation"
    [ 45238.444] compiled for 1.9.0, module version = 2.3.0
    [ 45238.444] Module class: X.Org Video Driver
    [ 45238.444] ABI class: X.Org Video Driver, version 8.0
    [ 45238.444] (II) LoadModule: "fbdev"
    [ 45238.444] (WW) Warning, couldn't open module fbdev
    [ 45238.444] (II) UnloadModule: "fbdev"
    [ 45238.444] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 45238.444] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
    [ 45238.444] (II) VESA: driver for VESA chipsets: vesa
    [ 45238.444] (++) using VT number 7
    [ 45238.448] (WW) Falling back to old probe method for vesa
    [ 45238.450] drmOpenDevice: node name is /dev/dri/card0
    [ 45238.450] drmOpenDevice: open result is 8, (OK)
    [ 45238.450] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 45238.450] drmOpenDevice: node name is /dev/dri/card0
    [ 45238.450] drmOpenDevice: open result is 8, (OK)
    [ 45238.450] drmOpenByBusid: drmOpenMinor returns 8
    [ 45238.450] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 45238.450] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 45238.450] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 45238.451] (==) intel(0): RGB weight 888
    [ 45238.451] (==) intel(0): Default visual is TrueColor
    [ 45238.451] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
    [ 45238.451] (--) intel(0): Chipset: "GM45"
    [ 45238.451] (==) intel(0): video overlay key set to 0x101fe
    [ 45238.472] (II) intel(0): Output VGA1 has no monitor section
    [ 45238.578] (II) intel(0): Output LVDS1 has no monitor section
    [ 45238.578] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 45238.581] (II) intel(0): Output DP1 has no monitor section
    [ 45238.599] (II) intel(0): EDID for output VGA1
    [ 45238.705] (II) intel(0): EDID for output LVDS1
    [ 45238.705] (II) intel(0): Manufacturer: LGD Model: 1f6 Serial#: 0
    [ 45238.705] (II) intel(0): Year: 2009 Week: 0
    [ 45238.705] (II) intel(0): EDID Version: 1.3
    [ 45238.705] (II) intel(0): Digital Display Input
    [ 45238.705] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
    [ 45238.705] (II) intel(0): Gamma: 2.20
    [ 45238.705] (II) intel(0): No DPMS capabilities specified
    [ 45238.705] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 45238.705] (II) intel(0): First detailed timing is preferred mode
    [ 45238.705] (II) intel(0): redX: 0.603 redY: 0.349 greenX: 0.325 greenY: 0.553
    [ 45238.705] (II) intel(0): blueX: 0.157 blueY: 0.144 whiteX: 0.313 whiteY: 0.329
    [ 45238.705] (II) intel(0): Manufacturer's mask: 0
    [ 45238.705] (II) intel(0): Supported detailed timing:
    [ 45238.705] (II) intel(0): clock: 71.0 MHz Image Size: 331 x 207 mm
    [ 45238.705] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
    [ 45238.705] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
    [ 45238.705] (II) intel(0): LG Display
    [ 45238.705] (II) intel(0): LP154WX4-TLB5
    [ 45238.705] (II) intel(0): EDID (in hex):
    [ 45238.706] (II) intel(0): 00ffffffffffff0030e4f60100000000
    [ 45238.706] (II) intel(0): 00130103802115780a56759a59538d28
    [ 45238.706] (II) intel(0): 24505400000001010101010101010101
    [ 45238.706] (II) intel(0): 010101010101bc1b00a0502017303020
    [ 45238.706] (II) intel(0): 36004bcf100000190000000000000000
    [ 45238.706] (II) intel(0): 00000000000000000000000000fe004c
    [ 45238.706] (II) intel(0): 4720446973706c61790a2020000000fe
    [ 45238.706] (II) intel(0): 004c503135345758342d544c423500eb
    [ 45238.706] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Printing probed modes for output LVDS1
    [ 45238.706] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 45238.706] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 45238.706] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 45238.706] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 45238.706] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 45238.707] (II) intel(0): EDID for output DP1
    [ 45238.707] (II) intel(0): Output VGA1 disconnected
    [ 45238.707] (II) intel(0): Output LVDS1 connected
    [ 45238.707] (II) intel(0): Output DP1 disconnected
    [ 45238.707] (II) intel(0): Using exact sizes for initial modes
    [ 45238.707] (II) intel(0): Output LVDS1 using initial mode 1280x800
    [ 45238.707] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 45238.707] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
    [ 45238.707] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
    [ 45238.707] (==) intel(0): DPI set to (96, 96)
    [ 45238.707] (II) Loading sub module "fb"
    [ 45238.707] (II) LoadModule: "fb"
    [ 45238.707] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 45238.707] (II) Module fb: vendor="X.Org Foundation"
    [ 45238.707] compiled for 1.9.0, module version = 1.0.0
    [ 45238.707] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 45238.707] (II) UnloadModule: "vesa"
    [ 45238.708] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 45238.708] (==) Depth 24 pixmap format is 32 bpp
    [ 45238.708] (II) intel(0): [DRI2] Setup complete
    [ 45238.708] (II) intel(0): [DRI2] DRI driver: i965
    [ 45238.708] (**) intel(0): Tiling enabled
    [ 45238.708] (**) intel(0): SwapBuffers wait enabled
    [ 45238.708] (==) intel(0): VideoRam: 262144 KB
    [ 45238.708] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
    [ 45238.719] (II) UXA(0): Driver registered support for the following operations:
    [ 45238.719] (II) solid
    [ 45238.719] (II) copy
    [ 45238.719] (II) composite (RENDER acceleration)
    [ 45238.719] (II) put_image
    [ 45238.719] (II) get_image
    [ 45238.719] (==) intel(0): Backing store disabled
    [ 45238.719] (==) intel(0): Silken mouse enabled
    [ 45238.719] (II) intel(0): Initializing HW Cursor
    [ 45238.745] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 45238.755] (==) intel(0): DPMS enabled
    [ 45238.755] (==) intel(0): Intel XvMC decoder enabled
    [ 45238.755] (II) intel(0): Set up textured video
    [ 45238.755] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 45238.755] (II) intel(0): direct rendering: DRI2 Enabled
    [ 45238.755] (--) RandR disabled
    [ 45238.755] (II) Initializing built-in extension Generic Event Extension
    [ 45238.755] (II) Initializing built-in extension SHAPE
    [ 45238.755] (II) Initializing built-in extension MIT-SHM
    [ 45238.755] (II) Initializing built-in extension XInputExtension
    [ 45238.755] (II) Initializing built-in extension XTEST
    [ 45238.755] (II) Initializing built-in extension BIG-REQUESTS
    [ 45238.755] (II) Initializing built-in extension SYNC
    [ 45238.755] (II) Initializing built-in extension XKEYBOARD
    [ 45238.755] (II) Initializing built-in extension XC-MISC
    [ 45238.755] (II) Initializing built-in extension SECURITY
    [ 45238.755] (II) Initializing built-in extension XINERAMA
    [ 45238.755] (II) Initializing built-in extension XFIXES
    [ 45238.755] (II) Initializing built-in extension RENDER
    [ 45238.755] (II) Initializing built-in extension RANDR
    [ 45238.755] (II) Initializing built-in extension COMPOSITE
    [ 45238.755] (II) Initializing built-in extension DAMAGE
    [ 45238.767] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 45238.767] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 45238.767] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 45238.767] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 45238.767] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 45238.767] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
    [ 45238.767] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 45238.768] (II) intel(0): Setting screen physical size to 338 x 211
    [ 45238.886] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 45238.886] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 45238.886] (II) LoadModule: "evdev"
    [ 45238.886] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 45238.886] (II) Module evdev: vendor="X.Org Foundation"
    [ 45238.886] compiled for 1.9.0, module version = 2.5.0
    [ 45238.886] Module class: X.Org XInput Driver
    [ 45238.886] ABI class: X.Org XInput driver, version 11.0
    [ 45238.886] (**) Power Button: always reports core events
    [ 45238.886] (**) Power Button: Device: "/dev/input/event2"
    [ 45238.899] (--) Power Button: Found keys
    [ 45238.899] (II) Power Button: Configuring as keyboard
    [ 45238.899] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 45238.899] (**) Option "xkb_rules" "evdev"
    [ 45238.899] (**) Option "xkb_model" "evdev"
    [ 45238.899] (**) Option "xkb_layout" "us"
    [ 45238.934] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 45238.934] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 45238.934] (**) Video Bus: always reports core events
    [ 45238.934] (**) Video Bus: Device: "/dev/input/event4"
    [ 45238.943] (--) Video Bus: Found keys
    [ 45238.943] (II) Video Bus: Configuring as keyboard
    [ 45238.943] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 45238.943] (**) Option "xkb_rules" "evdev"
    [ 45238.943] (**) Option "xkb_model" "evdev"
    [ 45238.943] (**) Option "xkb_layout" "us"
    [ 45238.945] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
    [ 45238.945] (II) No input driver/identifier specified (ignoring)
    [ 45238.946] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
    [ 45238.946] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 45238.946] (**) Sleep Button: always reports core events
    [ 45238.946] (**) Sleep Button: Device: "/dev/input/event1"
    [ 45238.953] (--) Sleep Button: Found keys
    [ 45238.953] (II) Sleep Button: Configuring as keyboard
    [ 45238.953] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    [ 45238.953] (**) Option "xkb_rules" "evdev"
    [ 45238.953] (**) Option "xkb_model" "evdev"
    [ 45238.953] (**) Option "xkb_layout" "us"
    [ 45238.956] (II) config/udev: Adding input device Acer Crystal Eye webcam (/dev/input/event7)
    [ 45238.956] (**) Acer Crystal Eye webcam: Applying InputClass "evdev keyboard catchall"
    [ 45238.956] (**) Acer Crystal Eye webcam: always reports core events
    [ 45238.956] (**) Acer Crystal Eye webcam: Device: "/dev/input/event7"
    [ 45238.963] (--) Acer Crystal Eye webcam: Found keys
    [ 45238.963] (II) Acer Crystal Eye webcam: Configuring as keyboard
    [ 45238.963] (II) XINPUT: Adding extended input device "Acer Crystal Eye webcam" (type: KEYBOARD)
    [ 45238.963] (**) Option "xkb_rules" "evdev"
    [ 45238.963] (**) Option "xkb_model" "evdev"
    [ 45238.963] (**) Option "xkb_layout" "us"
    [ 45238.963] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
    [ 45238.964] (II) No input driver/identifier specified (ignoring)
    [ 45238.971] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
    [ 45238.971] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 45238.971] (**) AT Translated Set 2 keyboard: always reports core events
    [ 45238.972] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
    [ 45238.979] (--) AT Translated Set 2 keyboard: Found keys
    [ 45238.979] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 45238.979] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 45238.979] (**) Option "xkb_rules" "evdev"
    [ 45238.979] (**) Option "xkb_model" "evdev"
    [ 45238.979] (**) Option "xkb_layout" "us"
    [ 45238.980] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event5)
    [ 45238.980] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
    [ 45238.980] (**) PS/2 Mouse: always reports core events
    [ 45238.980] (**) PS/2 Mouse: Device: "/dev/input/event5"
    [ 45238.993] (--) PS/2 Mouse: Found 3 mouse buttons
    [ 45238.993] (--) PS/2 Mouse: Found relative axes
    [ 45238.993] (--) PS/2 Mouse: Found x and y relative axes
    [ 45238.993] (II) PS/2 Mouse: Configuring as mouse
    [ 45238.993] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
    [ 45238.993] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 45238.993] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
    [ 45238.993] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
    [ 45238.993] (**) PS/2 Mouse: (accel) acceleration profile 0
    [ 45238.993] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
    [ 45238.993] (**) PS/2 Mouse: (accel) acceleration threshold: 4
    [ 45238.993] (II) PS/2 Mouse: initialized for relative axes.
    [ 45238.993] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
    [ 45238.993] (II) No input driver/identifier specified (ignoring)
    [ 45238.994] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
    [ 45238.994] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
    [ 45238.994] (II) LoadModule: "synaptics"
    [ 45238.994] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 45238.994] (II) Module synaptics: vendor="X.Org Foundation"
    [ 45238.994] compiled for 1.9.0, module version = 1.3.0
    [ 45238.994] Module class: X.Org XInput Driver
    [ 45238.994] ABI class: X.Org XInput driver, version 11.0
    [ 45238.994] (II) Synaptics touchpad driver version 1.3.0
    [ 45238.995] (**) Option "Device" "/dev/input/event6"
    [ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
    [ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
    [ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
    [ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
    [ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
    [ 45239.033] (**) Option "EmulateTwoFingerMinZ" "40"
    [ 45239.033] (**) Option "EmulateTwoFingerMinW" "5"
    [ 45239.033] (**) Option "VertEdgeScroll" "on"
    [ 45239.033] (**) Option "CornerCoasting" "1"
    [ 45239.033] (**) Option "VertTwoFingerScroll" "on"
    [ 45239.033] (**) Option "RBCornerButton" "3"
    [ 45239.033] (**) Option "LTCornerButton" "2"
    [ 45239.033] (**) Option "TapButton1" "1"
    [ 45239.033] (**) Option "TapButton2" "2"
    [ 45239.033] (**) Option "TapButton3" "3"
    [ 45239.033] (**) Option "CoastingSpeed" "0.5"
    [ 45239.033] (**) Option "CoastingFriction" "0"
    [ 45239.059] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 45239.059] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    [ 45239.073] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
    [ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
    [ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
    [ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
    [ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
    [ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
    [ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
    [ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
    [ 45239.099] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 45239.100] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
    [ 45239.100] (II) No input driver/identifier specified (ignoring)
    [ 45242.575] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 45242.575] (II) intel(0): Printing DDC gathered Modelines:
    [ 45242.575] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 45243.125] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 45243.125] (II) intel(0): Printing DDC gathered Modelines:
    [ 45243.125] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 45245.428] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 45245.428] (II) intel(0): Printing DDC gathered Modelines:
    [ 45245.428] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 45248.639] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 45248.639] (II) intel(0): Printing DDC gathered Modelines:
    [ 45248.639] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 70602.586] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 70602.586] (II) intel(0): Printing DDC gathered Modelines:
    [ 70602.586] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 70602.803] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 70602.803] (II) intel(0): Printing DDC gathered Modelines:
    [ 70602.803] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 70603.146] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 70603.146] (II) intel(0): Printing DDC gathered Modelines:
    [ 70603.146] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 70603.358] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 70603.358] (II) intel(0): Printing DDC gathered Modelines:
    [ 70603.359] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 70603.518] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 70603.518] (II) intel(0): Printing DDC gathered Modelines:
    [ 70603.518] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 70603.662] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 70603.662] (II) intel(0): Printing DDC gathered Modelines:
    [ 70603.662] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 90776.420] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 90776.420] (II) intel(0): Printing DDC gathered Modelines:
    [ 90776.420] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122487.594] (II) intel(0): EDID vendor "LGD", prod id 502
    [122487.594] (II) intel(0): Printing DDC gathered Modelines:
    [122487.594] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122488.139] (II) intel(0): EDID vendor "LGD", prod id 502
    [122488.139] (II) intel(0): Printing DDC gathered Modelines:
    [122488.139] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122488.784] (II) intel(0): EDID vendor "LGD", prod id 502
    [122488.784] (II) intel(0): Printing DDC gathered Modelines:
    [122488.784] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122488.980] (II) intel(0): EDID vendor "LGD", prod id 502
    [122488.980] (II) intel(0): Printing DDC gathered Modelines:
    [122488.980] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122489.174] (II) intel(0): EDID vendor "LGD", prod id 502
    [122489.174] (II) intel(0): Printing DDC gathered Modelines:
    [122489.174] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122489.321] (II) intel(0): EDID vendor "LGD", prod id 502
    [122489.321] (II) intel(0): Printing DDC gathered Modelines:
    [122489.321] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122489.470] (II) intel(0): EDID vendor "LGD", prod id 502
    [122489.470] (II) intel(0): Printing DDC gathered Modelines:
    [122489.470] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122489.617] (II) intel(0): EDID vendor "LGD", prod id 502
    [122489.617] (II) intel(0): Printing DDC gathered Modelines:
    [122489.617] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122489.756] (II) intel(0): EDID vendor "LGD", prod id 502
    [122489.756] (II) intel(0): Printing DDC gathered Modelines:
    [122489.756] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122489.903] (II) intel(0): EDID vendor "LGD", prod id 502
    [122489.904] (II) intel(0): Printing DDC gathered Modelines:
    [122489.904] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122490.054] (II) intel(0): EDID vendor "LGD", prod id 502
    [122490.054] (II) intel(0): Printing DDC gathered Modelines:
    [122490.054] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165444.489] (II) intel(0): EDID vendor "LGD", prod id 502
    [165444.519] (II) intel(0): Printing DDC gathered Modelines:
    [165444.519] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165445.260] (II) intel(0): EDID vendor "LGD", prod id 502
    [165445.260] (II) intel(0): Printing DDC gathered Modelines:
    [165445.261] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165445.519] (II) intel(0): EDID vendor "LGD", prod id 502
    [165445.519] (II) intel(0): Printing DDC gathered Modelines:
    [165445.519] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165445.682] (II) intel(0): EDID vendor "LGD", prod id 502
    [165445.682] (II) intel(0): Printing DDC gathered Modelines:
    [165445.682] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165445.827] (II) intel(0): EDID vendor "LGD", prod id 502
    [165445.827] (II) intel(0): Printing DDC gathered Modelines:
    [165445.827] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165446.027] (II) intel(0): EDID vendor "LGD", prod id 502
    [165446.027] (II) intel(0): Printing DDC gathered Modelines:
    [165446.027] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165446.234] (II) intel(0): EDID vendor "LGD", prod id 502
    [165446.234] (II) intel(0): Printing DDC gathered Modelines:
    [165446.234] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165446.409] (II) intel(0): EDID vendor "LGD", prod id 502
    [165446.409] (II) intel(0): Printing DDC gathered Modelines:
    [165446.409] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165446.638] (II) intel(0): EDID vendor "LGD", prod id 502
    [165446.639] (II) intel(0): Printing DDC gathered Modelines:
    [165446.639] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165446.798] (II) intel(0): EDID vendor "LGD", prod id 502
    [165446.798] (II) intel(0): Printing DDC gathered Modelines:
    [165446.798] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165447.035] (II) intel(0): EDID vendor "LGD", prod id 502
    [165447.035] (II) intel(0): Printing DDC gathered Modelines:
    [165447.035] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165447.227] (II) intel(0): EDID vendor "LGD", prod id 502
    [165447.227] (II) intel(0): Printing DDC gathered Modelines:
    [165447.227] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165450.227] (II) intel(0): EDID vendor "LGD", prod id 502
    [165450.227] (II) intel(0): Printing DDC gathered Modelines:
    [165450.227] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [edit] I haven't had any problems the since I disabled all the extra stuff. I don't feel like finding the exact cause since I think it was specific to my own setup... though I suspect syndaemon. I'll go ahead and mark this as solved... again. Thanks for the help.
    Last edited by drsjlazar (2010-10-13 14:44:37)

  • Strange tty behaviour with xorg 1.8

    So, my girlfiend has an ooooold machine, I've decided to
    install arch on it -
    and I'm stuck with a strange thing there - when I start Xorg ( with startx, which works fine ),
    I cannot switch back to tty1-6 (e.g. I think, I can, but it shows nothing )
    There are no hints in /var/log/Xorg.log nor in dmesg or in /var/log/kernel.log
    What is happening there???
    ( Girlfriend is not really a terminal user, thanx for the advice )
    Last edited by scar (2010-06-22 17:25:15)

    Edit 12:53 See my next post - yyou need either the nouveau or the nv driver installed and configured in xorg.conf
    The 'nouveau' in the kernel is not the X driver. You need to install that explicitly (xf86-video-nouveau). If you are running without an xorg.conf file you must create one with the following:
    Section "Device"
    Identifier "n"
    Driver "nouveau"
    EndSection
    Otherwise you must edit the 'Device' section in your xorg.conf to specify the nouveau driver.
    In your dmesg you should see some lines at the end (after all the hdd stuff) like so:
    nouveau 0000:01:00.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
    [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x011000b2)
    [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
    [drm] nouveau 0000:01:00.0: ... appears to be valid
    [drm] nouveau 0000:01:00.0: BMP BIOS found
    [drm] nouveau 0000:01:00.0: BMP version 5.20
    [drm] nouveau 0000:01:00.0: Bios version 03.11.01.24
    [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 1.5
    [drm] nouveau 0000:01:00.0: Raw DCB entry 0: f0003f00 000088b8
    [drm] nouveau 0000:01:00.0: Raw DCB entry 1: f2204301 ffffffff
    [drm] nouveau 0000:01:00.0: Raw DCB entry 2: f2244301 ffffffff
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xAAD2
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xB1AE
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xAAED
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xB155
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xAB80
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xACC2
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xABA5
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0xAC5D
    [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM
    This is for a PCI MX400 - I haven't installed Arch on my really old machine with an AGP card yet.
    And in your Xorg.0.log file (with the vouveau driver specified as above) you should see something like:
    [ 15.149] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 15.162] (II) Module nouveau: vendor="X.Org Foundation"
    [ 15.162] compiled for 1.8.0.902, module version = 0.0.16
    [ 15.162] Module class: X.Org Video Driver
    [ 15.162] ABI class: X.Org Video Driver, version 7.0
    [ 15.162] (II) NOUVEAU driver
    [ 15.162] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 15.162] RIVA TNT (NV04)
    [ 15.162] RIVA TNT2 (NV05)
    [ 15.162] GeForce 256 (NV10)
    [ 15.162] GeForce 2 (NV11, NV15)
    [ 15.162] GeForce 4MX (NV17, NV18)
    [ 15.162] GeForce 3 (NV20)
    [ 15.162] GeForce 4Ti (NV25, NV28)
    [ 15.162] GeForce FX (NV3x)
    [ 15.162] GeForce 6 (NV4x)
    [ 15.162] GeForce 7 (G7x)
    [ 15.162] GeForce 8 (G8x)
    [ 15.162] (++) using VT number 7
    [ 15.165] (II) Primary Device is: PCI 01@00:00:0
    [ 15.165] drmOpenDevice: node name is /dev/dri/card0
    [ 15.165] drmOpenDevice: open result is 7, (OK)
    [ 15.165] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 15.165] drmOpenDevice: node name is /dev/dri/card0
    [ 15.165] drmOpenDevice: open result is 7, (OK)
    [ 15.165] drmOpenByBusid: drmOpenMinor returns 7
    [ 15.165] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 15.165] (II) [drm] nouveau interface version: 0.0.16
    [ 15.165] (II) Loading sub module "dri"
    [ 15.166] (II) LoadModule: "dri"
    [ 15.166] (II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
    [ 15.166] (II) NOUVEAU(0): Loaded DRI module
    [ 15.166] drmOpenDevice: node name is /dev/dri/card0
    [ 15.166] drmOpenDevice: open result is 8, (OK)
    [ 15.166] drmOpenDevice: node name is /dev/dri/card0
    [ 15.166] drmOpenDevice: open result is 8, (OK)
    [ 15.166] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 15.166] drmOpenDevice: node name is /dev/dri/card0
    [ 15.166] drmOpenDevice: open result is 8, (OK)
    [ 15.166] drmOpenByBusid: drmOpenMinor returns 8
    [ 15.166] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 15.166] (II) [drm] DRM interface version 1.3
    [ 15.166] (II) [drm] DRM open master succeeded.
    [ 15.166] (--) NOUVEAU(0): Chipset: "NVIDIA NV11"
    [ 15.166] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 15.166] (==) NOUVEAU(0): RGB weight 888
    [ 15.167] (==) NOUVEAU(0): Default visual is TrueColor
    [ 15.167] (==) NOUVEAU(0): Using HW cursor
    [ 15.272] (II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
    [ 15.379] (II) NOUVEAU(0): EDID for output VGA-1
    [ 15.379] (II) NOUVEAU(0): Manufacturer: GSM Model: 436f Serial#: 45946
    [ 15.379] (II) NOUVEAU(0): Year: 2005 Week: 1
    [ 15.379] (II) NOUVEAU(0): EDID Version: 1.3
    [ 15.379] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 15.379] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
    [ 15.379] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27
    [ 15.379] (II) NOUVEAU(0): Gamma: 2.20
    [ 15.379] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 15.379] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 15.379] (II) NOUVEAU(0): redX: 0.641 redY: 0.342 greenX: 0.292 greenY: 0.611
    [ 15.379] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
    [ 15.380] (II) NOUVEAU(0): Supported established timings:
    [ 15.380] (II) NOUVEAU(0): 720x400@70Hz
    [ 15.380] (II) NOUVEAU(0): 640x480@60Hz
    [ 15.380] (II) NOUVEAU(0): 640x480@75Hz
    [ 15.380] (II) NOUVEAU(0): 800x600@60Hz
    [ 15.380] (II) NOUVEAU(0): 800x600@75Hz
    [ 15.380] (II) NOUVEAU(0): 832x624@75Hz
    [ 15.380] (II) NOUVEAU(0): 1024x768@60Hz
    [ 15.380] (II) NOUVEAU(0): 1024x768@75Hz
    [ 15.380] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 15.380] (II) NOUVEAU(0): 1152x864@75Hz
    [ 15.380] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 15.380] (II) NOUVEAU(0): Supported standard timings:
    [ 15.380] (II) NOUVEAU(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
    [ 15.380] (II) NOUVEAU(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
    [ 15.380] (II) NOUVEAU(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
    [ 15.380] (II) NOUVEAU(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 15.380] (II) NOUVEAU(0): Supported detailed timing:
    [ 15.380] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 338 x 270 mm
    [ 15.380] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 15.380] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 15.380] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
    [ 15.380] (II) NOUVEAU(0): Monitor name: L1715S
    [ 15.380] (II) NOUVEAU(0): Monitor name:
    [ 15.380] (II) NOUVEAU(0): EDID (in hex):
    [ 15.380] (II) NOUVEAU(0): 00ffffffffffff001e6d6f437ab30000
    [ 15.380] (II) NOUVEAU(0): 010f01036e221b78ea2ee5a4574a9c25
    [ 15.380] (II) NOUVEAU(0): 115054a56b80314f454f614f81800101
    [ 15.380] (II) NOUVEAU(0): 010101010101302a009851002a403070
    [ 15.380] (II) NOUVEAU(0): 1300520e1100001e000000fd00384b1e
    [ 15.380] (II) NOUVEAU(0): 530e000a202020202020000000fc004c
    [ 15.380] (II) NOUVEAU(0): 31373135530a202020202020000000fc
    [ 15.380] (II) NOUVEAU(0): 000a20202020202020202020202000df
    [ 15.380] (II) NOUVEAU(0): EDID vendor "GSM", prod id 17263
    [ 15.381] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 15.381] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 15.381] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 15.381] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 15.381] (II) NOUVEAU(0): Printing probed modes for output VGA-1
    [ 15.381] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 15.381] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 15.382] (II) NOUVEAU(0): Output VGA-1 connected
    [ 15.382] (II) NOUVEAU(0): Using user preference for initial modes
    [ 15.382] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
    [ 15.382] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 15.382] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 1280)
    [ 15.382] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 15.382] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 15.382] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    [ 15.382] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 15.382] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    [ 15.382] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 15.382] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    [ 15.382] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    [ 15.382] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
    [ 15.382] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 15.382] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 15.382] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 15.382] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
    [ 15.382] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 15.382] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    [ 15.382] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 15.382] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 15.382] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 15.382] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    [ 15.382] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 15.382] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 15.382] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 15.382] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 15.382] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 15.383] (**) NOUVEAU(0): Display dimensions: (340, 270) mm
    [ 15.383] (**) NOUVEAU(0): DPI set to (95, 96)
    [ 15.383] (II) Loading sub module "fb"
    [ 15.383] (II) LoadModule: "fb"
    [ 15.383] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 15.397] (II) Module fb: vendor="X.Org Foundation"
    [ 15.397] compiled for 1.8.1.902, module version = 1.0.0
    [ 15.397] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 15.397] (II) Loading sub module "exa"
    [ 15.397] (II) LoadModule: "exa"
    [ 15.398] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 15.399] (II) Module exa: vendor="X.Org Foundation"
    [ 15.399] compiled for 1.8.1.902, module version = 2.5.0
    [ 15.399] ABI class: X.Org Video Driver, version 7.0
    [ 15.399] (II) Loading sub module "shadowfb"
    [ 15.399] (II) LoadModule: "shadowfb"
    [ 15.399] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 15.400] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 15.400] compiled for 1.8.1.902, module version = 1.0.0
    [ 15.400] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 15.400] (--) Depth 24 pixmap format is 32 bpp
    [ 15.405] (II) NOUVEAU(0): Opened GPU channel 1
    [ 15.406] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 15.406] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau_vieux
    [ 15.406] (II) NOUVEAU(0): GART: 64MiB available
    [ 15.688] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
    [ 15.702] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 15.702] (II) EXA(0): Driver registered support for the following operations:
    [ 15.702] (II) Solid
    [ 15.702] (II) Copy
    [ 15.702] (II) Composite (RENDER acceleration)
    [ 15.702] (II) UploadToScreen
    [ 15.702] (II) DownloadFromScreen
    [ 15.714] (==) NOUVEAU(0): Backing store disabled
    [ 15.714] (==) NOUVEAU(0): Silken mouse enabled
    [ 15.721] (II) NOUVEAU(0): NVEnterVT is called.
    [ 15.721] (**) NOUVEAU(0): DPMS enabled
    [ 15.721] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 15.722] (--) RandR disabled
    I think the bit about uninstalling the xf86-video-vesa driver was a red herring - but if you uninstall that and the xf86-video-nv driver you know they can't be messing things up. Do a 'cat /var/log/pacman.log | grep xf86-video*' to see what you've got installed.
    Pete
    Last edited by shetland_breeder (2010-07-02 11:55:01)

  • I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing.  Now album covers are interspersed with my pictures.  I have been using apple tv for a while and never had this happen before

    I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing.  Now album covers are interspersed with my pictures.  I have been using apple tv for a while and never had this happen before

    Are you watching this content though iCloud or though from iTunes on your local computer?  If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens?  This is geerally a much more reliable way to view the content.  Easer to fast forward and rewind too.
    - I have a stable internet connection
    Clearlly you don't
    >(Ive tested on other devices)
    Which does not tell you anything about the specific connnection from ATV to iCloud.
    >I am able to stream Netflix problem free from my AppleTV without so much as a hicup
    Again which does not tell you anything about the specific connnection from ATV to iCloud.
    >- I am able to download the episodes to my phone, ipad, and computer without any issues
    Again which does not tell you anything about the specific connnection from ATV to iCloud.  It does remove your ISP throattly traffice as a possible cause though.  So that is good.
    Have you checked your wireless rounter?  Tried doing the factory restor on it?  Upgrading it's firmware?  Is it and or ATV getting extreamly hot when this problme happens?

  • Strange problem with Mighty Mouse scroll ball

    Hi,
    yesterday suddenly my Mighty Mouse start to have a strange mood. Using scroll ball to go down in a page I haven't problem, but trying to go up don't happened nothing! The problem seems to be software, because the hardware seems to be good.
    What can I do?
    Bye

    http://docs.info.apple.com/article.html?artnum=302417 How to clean your Mighty Mouse
    Take a piece of bright white paper, turn the mouse upside down on it, press down on the ball, and run the mouse quickly in circles over the paper. This will remove all the gunk that's building up on the ball
    TIP: To get to the gook inside the scroll nipple use a plastic toothpick.
    "Other Options:" Wear latex disposable gloves. A box of same can be purchased from your local Dollar Store or Pharmacy.
    Some cell phone leather cases actually fit right over the Mighty Mouse.
    Clean/wipe the Mighty Mouse off with a damp cloth/rag prior to going to bed each evening.
    Some users have found using the small alcohol pads quite successful. These can be obtained from any drug/pharmacy or Dollar Store.

  • Strange phenomenon when scrolling through develop module images in LR6

    I just upgraded to LR6 and so far like what I see as far as performance increases.
    Noticed a strange phenomenon today while scrolling through the images in the develop module. These are all rendered images with a preset applied to them.
    I notice when I use the arrow key to go to the next image, the image first displays very "flat" or basic and then the rendered image appears a second or two later. If I scroll back the image displays normal rendered.
    It is only when I go about 2-3 images back it starts to display the same issue of non-rendered to then a rendered image. If I scroll forward to images I have not seen yet it does the same thing of showing a non-rendered image to a rendered image.
    I think I narrowed this down to the "Use the graphics processor" option. If I turn this off  the image loads a lot slower but only displays the rendered version and not the flat and then rendered version.
    Turning the GPU option back on immediately does the dual image version. Strange and hard to explain but not sure if anyone else has seen this.
    Here are my system specs from the LR Performance tab:
    Lightroom version:  CC 2015 [1014445]
    License: Creative Cloud
    Operating system: Windows 8.1 Business Edition
    Version: 6.3 [9600]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 16
    Processor speed: 2.6 GHz
    Built-in memory: 32691.8 MB
    Real memory available to Lightroom: 32691.8 MB
    Real memory used by Lightroom: 4451.9 MB (13.6%)
    Virtual memory used by Lightroom: 4594.8 MB
    Memory cache size: 6002.1 MB
    Maximum thread count used by Camera Raw: 8
    Camera Raw SIMD optimization: SSE2,AVX
    System DPI setting: 144 DPI (high DPI mode)
    Desktop composition enabled: Yes
    Displays: 1) 3840x2160
    Input types: Multitouch: No, Integrated touch: No, Integrated pen: No, External touch: No, External pen: No, Keyboard: No
    Graphics Processor Info:
    GeForce GTX 680/PCIe/SSE2
    Check OpenGL support: Passed
    Vendor: NVIDIA Corporation
    Version: 3.3.0 NVIDIA 350.12
    Renderer: GeForce GTX 680/PCIe/SSE2
    LanguageVersion: 3.30 NVIDIA via Cg compiler
    Application folder: C:\Program Files\Adobe\Adobe Lightroom
    Library Path: E:\Lightroom Catalog\Lightroom CC\Lightroom CC.lrcat
    Settings Folder: C:\Users\Toby\AppData\Roaming\Adobe\Lightroom
    Installed Plugins:
    1) Adobe Revel Plug-in
    2) Behance
    3) Canon Easy-PhotoPrint Pro
    4) Canon Print Studio Pro
    5) Canon Tether Plugin
    6) Facebook
    7) Flickr
    8) HDR Efex Pro 2
    9) Perfect B&&W 8
    10) Perfect Effects 8
    11) Perfect Enhance 8
    12) Perfect Photo Suite 8
    13) Perfect Portrait 8
    14) Perfect Resize 8
    15) Show Focus Points
    16) Upload To Pictage
    Config.lua flags: None
    Adapter #1: Vendor : 10de
      Device : 1180
      Subsystem : 96910de
      Revision : a1
      Video Memory : 1987
    Adapter #2: Vendor : 1414
      Device : 8c
      Subsystem : 0
      Revision : 0
      Video Memory : 0
    AudioDeviceIOBlockSize: 1024
    AudioDeviceName: Speakers (SB Recon3D PCIe)
    AudioDeviceNumberOfChannels: 2
    AudioDeviceSampleRate: 44100
    Build: Uninitialized
    Direct2DEnabled: false
    GPUDevice: not available
    OGLEnabled: true
    Thanks for any thoughts,
    Toby

    Here is where you asked this before:
    http://www.adobeforums.com/webx/.59b79139/0

  • The mouse scroll wheel doesn't work with Xorg

    I recently installed Solaris 10 on my x86 box. One issue is that the mouse scroll wheel doesn't work with Xorg. Hmmm... Okay, it sometimes did work, and most of the time went on strike, and recovered at random. This pattern continued.
    My mouse is an ordinary PS/2 one with two buttons and a scroll wheel. I want to promise that there's absolutely nothing wrong with it per se. Here is some info:
    $ uname -a
    SunOS arbiter 5.10 Generic_127112-07 i86pc i386 i86pc
    $ grep -i mouse /var/log/Xorg.0.log
    (**) |-->Input Device "Mouse0"
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11/lib/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    (==) NVIDIA(0): Silken mouse disabled
    (II) Mouse0: Setting Device option to "/dev/mouse"
    (**) Mouse0: Protocol: VUID
    (**) Mouse0: Core Pointer
    (**) Option "Device" "/dev/mouse"
    (**) Mouse0: ZAxisMapping: buttons 4 and 5
    (**) Mouse0: Buttons: 9
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    # The section about mouse in /etc/X11/xorg.conf follows:
    Section "InputDevice"
            Identifier  "Mouse0"
            Driver      "mouse"
            Option      "Protocol" "auto"
            Option      "Device" "/dev/mouse"
            Option      "Buttons" "5"
            Option      "ZAxisMapping" "4 5"
            Option      "Emulate3Buttons" "false"
    EndSection
    # Note that the only result of explicitly changing protocol to ExplorerPS/2, PS/2, IMPS/2 or whatever else is that the cursor jumped here and there and everywhere when I moved the mouse.I ever post one in comp.unix.solaris to ask for help but got no effective solution. Thank you all.

    You remember correctly, Yvan.
    The 6.2.9 updater is available http://www.apple.com/support/downloads/appleworks629formac.htmlhere. Note that the updater is language specific. The one at the top of the list is for the International English version of AppleWorks. The US English version is the one in the box at the upper right, identified only by its file size.
    Regards,
    Barry

  • This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangly (I need help trying to use it)

    My Vista Home Premium desktop has not used Firefox for a long time. I just loaded it as well as on my Honeycomb Android. The statement that I made pretty much says what my problem is. I can use both of them at the same time and use a router with the air Verizon card installed.
    I'll repeat my question: This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangely (I need help trying to use it)

    My Vista Home Premium desktop has not used Firefox for a long time. I just loaded it as well as on my Honeycomb Android. The statement that I made pretty much says what my problem is. I can use both of them at the same time and use a router with the air Verizon card installed.
    I'll repeat my question: This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangely (I need help trying to use it)

  • Two-finger scrolling with xorg hotplugging?

    How can I activate two-finger scrolling with the latest xorg version?

    Mine's on by default i.e. I have no setting for it in the .fdi file, but it's working anyway. Try setting it explicitly with the VertTwoFingerScroll/HorizTwoFingerScroll parameters.

Maybe you are looking for

  • Webdynpro content administrator-- Start Assigned SLD  results in Error.

    Hi, I am using Netweaver 7.1 CE. I have configured SLD and started,and it is running. Now I went to crearte JCO destinations. When I tried to Start Assigned SLD  it is giving  a error. When I checked the Check SLD Connection  a pop up is comming and

  • Error while integrating 2 portals

    We are trying to set up an FPN between our EP (EP 7.0) and BI (BI 7.0) systems. We have enabled trust between the 2 systems and done all the required steps. However when we create an Iview in EP which calls a query from the BI system it asks for a us

  • Retrieving Model's metadata using OdiRef

    Folks, Does anyone knows how to get the "resource name" from a file type model, using odiRef? Let me be more specific: in a interface, when mapping a value to a target column, I have to insert the file name of a model's resource name. Have to note th

  • Moving acc files to SD card

    i would like to put my aac files on an SD card so i can load them into my car.  I understand that Match will provide access to my purchased music and my CD's loaded to itunes as AAC files.  Does iTunes let me put these files on SD card? Thanks

  • J2ME CLDC/MIDP emulator for Compaq iPAQ

    I would like to run J2ME CLDC with MIDP on my Compaq iPAQ 3650. I am NOT interested in PersonalJava at this time. I have two questions: 1. Has anyone tried to put the J2ME Wireless Toolkit emulator on iPAQ, with or without Swing? J2ME WTK currently r