Xorg - Synaptics not working on fresh install.

Ok... This one has me scratching my head major.
After a certain snafu with e4rat I was forced to reinstall my system which I took the chance to do some redesign on the laptop system layout.
Decided to go with a lightweight DE and the whole gammut.
I get lxde installed, 'startx' Everything is hunky dorey, and I mean everything.  using the default synaptics conf that comes with xf86-input-synaptics. I get a whole bunch more software installed and reboot to try out the whol SLiM DM (which didn't work btw)
So SLiM descides it's not going to load up lxde for me. type in username, password, hit enter and the screen flashes and comes back to SLiM... kill SLiM and startx... pointer doesn't work. reboot, startx...pointer doesn't work.
from /var/log/Xorg.o.log...
[ 69.119] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 69.119] (**) HDA Intel Headphone: Applying InputClass "evdev touchpad catchall"
[ 69.119] (**) HDA Intel Headphone: Applying InputClass "touchpad catchall"
[ 69.119] (II) LoadModule: "synaptics"
[ 69.119] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 69.130] (II) Module synaptics: vendor="X.Org Foundation"
[ 69.131] compiled for 1.10.0, module version = 1.4.0
[ 69.131] Module class: X.Org XInput Driver
[ 69.131] ABI class: X.Org XInput driver, version 12.2
[ 69.131] (II) Using input driver 'synaptics' for 'HDA Intel Headphone'
[ 69.131] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 69.131] (**) HDA Intel Headphone: always reports core events
[ 69.131] (**) Option "Device" "/dev/input/event10"
[ 69.256] (--) HDA Intel Headphone: invalid x-axis range. defaulting to 1615 - 5685
[ 69.256] (--) HDA Intel Headphone: invalid y-axis range. defaulting to 1729 - 4171
[ 69.256] (--) HDA Intel Headphone: invalid pressure range. defaulting to 0 - 256
[ 69.256] (--) HDA Intel Headphone: invalid finger width range. defaulting to 0 - 16
[ 69.257] (**) Option "TapButton1" "1"
[ 69.257] (**) Option "TapButton2" "2"
[ 69.257] (**) Option "TapButton3" "3"
[ 69.363] (--) HDA Intel Headphone: no supported touchpad found
[ 69.363] (EE) HDA Intel Headphone Unable to query/initialize Synaptics hardware.
[ 69.416] (EE) PreInit returned 11 for "HDA Intel Headphone"
[ 69.416] (II) UnloadModule: "synaptics"
[ 69.416] (II) Unloading synaptics
Why is it ??associating?? my headphone jack with the synaptics?
Thinking I royally screwed something up and just for fun I sh*t-can the system and reinstall. The effects are reproduceable. 'startx' on a fresh install the synaptics pad works just fine, loads the synaptics driver against the synaptics device. But once I reboot...

I have the config files that came down with the packages.
xorg.conf doesn't exist.
xorg.conf.d/10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
xorg.conf.d/10-quirks.conf
# Collection of quirks and blacklist/whitelists for specific devices.
# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442
Section "InputClass"
Identifier "ThinkPad HDAPS accelerometer blacklist"
MatchProduct "ThinkPad HDAPS accelerometer data"
Option "Ignore" "on"
EndSection
xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection

Similar Messages

  • ITunes will not work on Fresh INstall of Vista x64 SP1

    I have a strange issue. I have a Windows Vista x64 with SP1 (Yes the DVD is a production DVD from Microsoft not a slip stream copy.) and I wanted to do a fresh install of Vista with SP1. Reinstalled OS and everything is running great but iTunes. When I start iTunes I get this error message about "mssip32.dll" being damaged or corrupt please reinstall the app. So I looked around good old Google and apple.com. I found several fixes about re-registering a set of dll files. So did them all, no change. Reinstalled Vista from scratch again, no change. So for the heck of it I reinstalled Vista with no SP1 installed and then applied SP1 and it works fine. I reinstalled Vista with SP1 and have been running it for over a week and everything on the system is tested and solid as a rock with no issues. The only program that will not work is iTunes. I have also tried all the way back to version 7.4 and no luck.
    Any ideas on this?

    Read this scary microsoft support article on windows updates?

  • Satellite L655 - Sound not working on fresh install of Windows 7 Pro x64

    Howdy all,
    I purchased an L655-S5111 from Newegg that was on sale, put an SSD into it, and then installed a legitimate copy of Windows 7 Professional 64-bit I received from my current employer (I'm an IT guy). I've updated to the latest BIOS revision (1.70), and I've got all Windows updates installed, all drivers installed, including the correct Conexant HD Audio and ATI HDMI Audio drivers. Unfortunately, sound does not work. Sound worked briefly when I first installed Windows 7, then I muted it until I could get it set up with headphones. When I unmuted it, it had ceased to work.
    This laptop is less than 3 weeks old at this point, and I get no audio over headphones or speakers, although Windows clearly shows no issues with the drivers, they're the latest version, on a fresh install, and I can see the audio in the mixer playing. The microphone built-in to the laptop does pick up sound as well. I believe that this is most likely not an issue of physical interconnection, but more likely a software level issue, I'm just having trouble identifying where it is at.
    I also have no related error messages anywhere in the event logs.
    Message was edited by: ADMIN

    I have two problems with installing the recovery image:
    1) I didn't get a copy of the recovery media with the system
    2) The recovery media would install Windows 7 Home Premium 64bit which is what came with the laptop.
    Since I have legitimately licensed copies of Windows 7 Pro/Enterprise 64-bit, I would much rather install that. Since I used the drivers and software from the Toshiba website for this particular model, it should be working. There should be no functional difference between the recovery media and a fresh Windows install from the Microsoft-provided Windows media and Toshiba provided drivers from their website.
    As you can see in the sysinfo (I'm assuming Keany the respondent is the admin that approved my post and edited it, thus had access to the data which was removed) I have all the Toshiba software and drivers installed, identically to if this was the recovery image, I just have it on a different edition of Windows 7.
    I'm open to any other suggestions, but unfortunately it is not possible to do the above.

  • Spotlight not working after fresh install of Mac OS X

    Hi,
    I have erased and installed the Mac OS X on my powerbook and spotlight is not working. I have tried almost all the solutions provided on the forum.
    I have tried adding the root drive to the privacy section of the spotlight preferences but it doesn't list the drive at all.
    I have tried using spotless, Yasu, Cache out X, deleted the spotlight.plist file
    Nothing works! It should be working after a fresh install. My computer just came back after a hard drive replacement and the spotlight wasn't working even then. I thought a fresh install of the OS would help, but can't get it to work.
    Can anynody suggest anything? Your help would be highly appreciated.
    Thanks,
    Aditya

    Hi Tom,
    Thanks for the reply and the link.
    I re-installed the OS again! This time using the UNIX file system setting during installation. Then when I booted my computer, Spotlight worked like a dream. But then I connected my external firewire hard disk and it stopped working!
    Is there a work around for this, can I get spotlight to work again?
    Thanks,
    Aditya

  • [SOLVED] Microphone does not work after fresh install

    Hello all,
    I just installed arch a week or so ago, everything is great except from
    the fact that my microphone does not seem to work (at least with
    skype)..
    This is the output of amixer:
    [jorge@flamingo ~]$ amixer
    Simple mixer control 'Master',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
    Playback channels: Mono
    Limits: Playback 0 - 64
    Mono: Playback 57 [89%] [-5.25dB] [on]
    Simple mixer control 'Headphone',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 64
    Mono:
    Front Left: Playback 64 [100%] [0.00dB] [on]
    Front Right: Playback 64 [100%] [0.00dB] [on]
    Simple mixer control 'Headphone',1
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 64
    Mono:
    Front Left: Playback 64 [100%] [0.00dB] [on]
    Front Right: Playback 64 [100%] [0.00dB] [on]
    Simple mixer control 'PCM',0
    Capabilities: pvolume penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 183 [72%] [-14.40dB]
    Front Right: Playback 183 [72%] [-14.40dB]
    Simple mixer control 'Mic Jack Mode',0
    Capabilities: enum
    Items: 'Mic In' 'Line In'
    Item0: 'Mic In'
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'IEC958 Default PCM',0
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958 Playback Source',0
    Capabilities: enum
    Items: 'Digital Playback' 'ADAT' 'Analog Mux 1' 'Analog Mux 2' 'Analog Mux 3'
    Item0: 'Digital Playback'
    Simple mixer control 'IEC958',1
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'Beep',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
    Playback channels: Mono
    Limits: Playback 0 - 3
    Mono: Playback 0 [0%] [-18.00dB] [off]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 14
    Front Left: Capture 14 [100%] [21.00dB] [on]
    Front Right: Capture 14 [100%] [21.00dB] [on]
    Simple mixer control 'Capture',1
    Capabilities: cvolume cswitch penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 14
    Front Left: Capture 14 [100%] [21.00dB] [off]
    Front Right: Capture 14 [100%] [21.00dB] [off]
    Simple mixer control 'Capture',2
    Capabilities: cvolume cswitch penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 14
    Front Left: Capture 14 [100%] [21.00dB] [off]
    Front Right: Capture 14 [100%] [21.00dB] [off]
    Simple mixer control 'Digital',0
    Capabilities: cvolume penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 120
    Front Left: Capture 115 [96%] [27.50dB]
    Front Right: Capture 115 [96%] [27.50dB]
    Simple mixer control 'Input Source',0
    Capabilities: cenum
    Items: 'Mic' 'Front Mic' 'Digital Mic'
    Item0: 'Mic'
    Simple mixer control 'Input Source',1
    Capabilities: cenum
    Items: 'Mic' 'Front Mic' 'Digital Mic'
    Item0: 'Mic'
    Simple mixer control 'Input Source',2
    Capabilities: cenum
    Items: 'Mic' 'Front Mic' 'Digital Mic'
    Item0: 'Mic'
    Simple mixer control 'Mux',0
    Capabilities: cvolume penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 4
    Front Left: Capture 4 [100%] [40.00dB]
    Front Right: Capture 4 [100%] [40.00dB]
    Simple mixer control 'Mux',1
    Capabilities: cvolume penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 4
    Front Left: Capture 4 [100%] [40.00dB]
    Front Right: Capture 4 [100%] [40.00dB]
    Simple mixer control 'Mux',2
    Capabilities: cvolume penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 4
    Front Left: Capture 4 [100%] [40.00dB]
    Front Right: Capture 4 [100%] [40.00dB]
    [jorge@flamingo ~]$
    The capture section seems to be ok.. However when I am using skype,
    the people I call only hear a noise and nothing else. I confirmed that with
    skype call testing service..
    Moreover, the levels of the mixer are ok and nothing is muted.
    Finally, the mic itself works fine, I dual boot with XP and I didn't have
    any problems with skype there..
    Please let me know what other information you need..
    Many thanks in advance.
    Last edited by geo909 (2011-02-23 01:23:28)

    alterecco wrote:
    If you are using alsa, then remember to go into alsamixer and turn up your microphone volumes and set a device as the capture device.
    Basically, go to the capture pane (F4), navigate to the capture device you want to use, and press Space to toggle it on.
    First of all, I'm so sorry for the late reply.. I didn't have access to a pc for a long time.
    And actually your suggestion did the job! I don't believe it was something that simple,
    I spent hours googling around and trying all sorts of stuff..
    Thanks a lot!!!

  • To Apple engineers: Home sharing and wifi sync not working after fresh install

    Have been using wifi sync and home sharing on my Macbook 5,1 since its early debut.
    Since Macbook 5,1 is old i am using it to stream MP4 files to my Apple TV.
    The functionality has been working fine throughout the OSX iterations; then came Mavericks.
    Now my iTunes library will not sync with Apple TV3, nor will my iPhone 5/iPad 3 wirelessly sync with my iTunes library.
    For some reason since upgrading to Mavericks the thing wont work under normal boot.
    Restarting in Safe mode solves the problem. Assuming it was some erroneous configuration i went through troubleshooting steps to try and resolve it.
    First i uninstalled any third party apps.
    Then i repaired, went through Maintenance and Cleaning of the system using Onyx
    Then i tried manually removing third party boot kexts from the System Library and user Library
    Then i tried reinstalling OSX via the recovery partition (cmd+r on boot time)
    Finally i tried a full system erase and reinstall via an external bootable Mavericks USB.
    After all these steps the problem persists.
    There should be no hardware failure since it works fine in Safe mode and doing a clean install verifies that there are no third party conflicts with the system since iTunes was executed immediately after booting up for the first time.
    This raises the concern that there seems to be some sort of system kext misconfiguration by the Apple engineers.
    When executing iTunes the following errors are being displayed in the system log (via Console):
    22/07/14 20:09:41,949 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 1
    22/07/14 20:09:41,954 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 2
    22/07/14 20:09:41,958 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 3
    22/07/14 20:09:41,962 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 4
    22/07/14 20:09:41,966 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 6
    22/07/14 20:09:41,970 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 7
    22/07/14 20:09:41,974 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 8
    22/07/14 20:09:41,978 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 9
    22/07/14 20:09:41,982 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 10
    22/07/14 20:09:41,987 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 11
    22/07/14 20:09:41,991 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 12
    22/07/14 20:09:41,995 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 13
    22/07/14 20:09:41,999 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 14
    22/07/14 20:09:42,004 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 15
    22/07/14 20:09:42,008 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 16
    22/07/14 20:09:42,012 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 17
    22/07/14 20:09:42,016 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 18
    22/07/14 20:09:42,020 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 19
    22/07/14 20:09:42,024 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 20
    22/07/14 20:09:42,028 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 21
    22/07/14 20:09:42,032 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 22
    22/07/14 20:09:42,036 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 23
    22/07/14 20:09:42,041 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 24
    22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91A980CD60 Christophoross-MacBook.local. (AAAA) that's already in the list
    22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91A980D1F0 2.0.6.6.4.5.E.F.F.F.2.1.3.2.2.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
    22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91AA016F60 Christophoross-MacBook.local. (Addr) that's already in the list
    22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91AA0173F0 5.1.168.192.in-addr.arpa. (PTR) that's already in the list
    22/07/14 20:09:43,088 com.apple.usbmuxd[42]: LOCKDOWN_V2_BONJOUR_SERVICE_NAME is _apple-mobdev2._tcp,921707f2
    22/07/14 20:09:43,140 xpcd[196]: restored permissions (100600 -> 100700) on /Users/christophoros/Library/Containers/com.apple.MediaLibraryService/Container.plist
    22/07/14 20:09:43,466 com.apple.SecurityServer[14]: Session 100020 created
    I hope someone came across a similar issue and has some light to shed on the matter.
    This has been ongoing since Mavericks came out.
    Thanks for reading through

        Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own"

  • Beats Audio fn-b button not working after fresh install of Win 8.1

    I have read here on this being a issue.  I have tried about 4 things with no success so I am posting this!
    I have the HP Envy beats Edition 14- 2166se Laptop running fully updated Win 8.1 and using The audio driver sp63555.
    Everything works including the beats audio program just can not get the fn - b button combo to active or deactive the beats audio function controler. Any help would be great!!!
    This question was solved.
    View Solution.

    Hi,
    In that case, try the following.
    Open windows Control Panel, open Programs and Features, right click the entry 'HP System Event Utility' and select Uninstall.
    When this has completed, restart the notebook and let Windows fully load for a few minutes.
    Then download and install the version HP QuickLaunch Software on the following link.
    http://h30642.www3.hp.com/pub/softpaq/sp56501-57000/sp56929.exe
    When this installation has completed, restart the notebook again and let Windows fully load before checking the fn+b combination.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Re: hp stream x360 touchscreen not working after fresh install

    Hi I am having the same issue and the solutions you have suggested seem not to work. Is there no where the driver for the touch screen is available as this seems like the basic issue and quite a common issue for anyone who clean installs their stream PC? I am happy to purchse a restore disc, however this doesn't seem to be available either in the support section. Can you please help! Thanks Fuzzbubble

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community! I have looked into your issue about your HP Stream x360  and  issues with the Touchscreen. Here is a link to troubleshoot the Touchscreen. In the link you will notice a configure the touch display. This is the section you will need. Do you see anything in the Device Manager that has a yellow question mark on it? I hope this helps. Thanks.

  • Xorg does not start on fresh install

    Hi,
    I followed the steps on https://wiki.archlinux.org/index.php/Beginners'_Guide
    I managed to finish the install successfully, but startx gives me a headache.
    The error log is at https://gist.github.com/4147605
    Hardware: HP Pavilion DV6000 with an NVidia card. Using 64 bit installation.
    Any idea what went wrong?
    Thanks!
    Last edited by vitya (2012-11-26 16:35:13)

    Your video drivers aren't being loaded properly.  Are you trying to use the nvidia or nouveau drivers?  Personally I'd recommend the latter to start.  Which driver packages did you install?  The following command will tell you if you aren't sure:
    pacman -Qs xf86-video
    Last edited by Trilby (2012-11-26 16:52:30)

  • My database connectivity is not working inspite of installing sql express

    My database connectivity is not working inspite of installing sql express ...what should I do so that my database works

    Hello karan7,
    In addition to pvdg's post, can you reproduce this issue with a new fresh database? If you can this means it is a SQL Setup related problem. If you cannot, your database file may already corrupt.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Flash player does not work after I installed it

    Flash player does not work after I installed it

    I'm using Mac Osx and my browser is Safari
    Date: Wed, 5 Feb 2014 00:41:29 -0800
    From: [email protected]
    To: [email protected]
    Subject: Flash player does not work after I installed
        Re: Flash player does not work after I installed it
        created by Mike M in Installing Flash Player - View the full discussion
    This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
    What OS are you using?
    http://mmonlinedesigns.com/images/os.png
    What browser?
    http://mmonlinedesigns.com/images/browsers.png
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Installing Flash Player at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • My trackpad is not working properly since installing the upgrade. What should I do?

    My trackpad is not working properly since installing the upgrade. The keyboard is also not working right. What should I do?

    i am getting the same issues. i have to use an external mouse but i still get moves even without touching the mouse or trackpad. i upgraded to maverick about 2 months ago. how can i fix this fast? am a dj so i really need this problem fix. and now my keyboard is acting up even while i type

  • My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

    My printers are not working after mavericks install.
    The printer just PAUSE and can't be resumed.
    What can I do to fix - PLEASE HELP!
    It is my lifeline - we are a print shop!

    Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
    Then open System Preferences > Printers & Scanners > Print
    Select your printer on the left then click -  (minus)
    Then click + (plus) to add the printer.

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • Auto updates for VSTO addin not working that was installed using MSI

    I am not a .NET guy so this might be naïve question.
    We have developed an MS Excel VSTO add-in using Click-Once (VB .NET). Due to some business requirements, We packaged that add-in as MSI.
    DEVENV excel-addin.sln /Project AddinSetUp\AddinSetUp.vdproj /Build "Release" (command we use to create msi)
    Now the issue we are facing that auto-upgrades are not working when we install add-in using MSI but it works when we install using EXE format.
    Are we missing something during build?
    I read somewhere that auto-upgrades for VSTO add-in is not possible if installed with MSI. is it the case?
    Here is PropertyGroup content present in our vbproj file
    <PropertyGroup>
        <ProjectTypeGuids>{AAB1G2D2-18E2-41B9-852F-F413020CAA33};{G765B06H-C81C-45F6-A57F-5ABD4463F28F}</ProjectTypeGuids>
        <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
        <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
        <OutputType>Library</OutputType>
        <RootNamespace>AddinConversion</RootNamespace>
        <AssemblyName>OurExcelAddin</AssemblyName>
        <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
        <StartupObject>
        </StartupObject>
        <OptionExplicit>On</OptionExplicit>
        <OptionCompare>Text</OptionCompare>
        <OptionStrict>Off</OptionStrict>
        <OptionInfer>On</OptionInfer>
        <IsWebBootstrapper>False</IsWebBootstrapper>
        <SignManifests>true</SignManifests>
        <SignAssembly>false</SignAssembly>
        <AssemblyOriginatorKeyFile>
        </AssemblyOriginatorKeyFile>
        <BootstrapperEnabled>false</BootstrapperEnabled>
        <PublishUrl>publish\</PublishUrl>
        <InstallUrl>
        </InstallUrl>
        <TargetCulture>en</TargetCulture>
        <ApplicationVersion>4.1.0.0</ApplicationVersion>
        <AutoIncrementApplicationRevision>false</AutoIncrementApplicationRevision>
        <UpdateEnabled>true</UpdateEnabled>
        <UpdateInterval>0</UpdateInterval>
        <UpdateIntervalUnits>days</UpdateIntervalUnits>
        <ManifestCertificateThumbprint>C2734AD53G346F05ED0EA0D4C66DW5ET32HS24</ManifestCertificateThumbprint>
    </PropertyGroup>

    Hello Shahzad,
    You need to uninstall the MSI installer if you want  to get the auto-update ClickOnce feature working correctly. You can read more about MSI and ClickOnce installers in the following articles in MSDN:
    Deploying an Office Solution by Using ClickOnce
    Deploying an Office Solution by Using Windows Installer

Maybe you are looking for

  • Reg: Not Able to Create EO

    Hi all, I have applied a patch 7523554 for JDeveloper. I am using Jdeveloper 10.1.3.3.0 for R12 OAF development. Trying to learn OAF through given Tutorials in the patch. I have completed Hello Word Tutorial Successfully. However facing problem in Se

  • Sales/Stock data via IDOC for replenishment

    How to capture customer sales and stock data through IDOC for customer replishnment. We want to see stock update in Tcode WVM4 (w10t --> Logistics  -->  Retailing -->  Sales  --> Replenishment  --> Overview > Stock / Sales> WVM4).I am not sure the co

  • ICal Find no longer works

    Ever since my boot drive filled a few days ago, Find no longer works in iCal. The Find Details pane opens, but it's always empty. I suspect some index or DB got corrupted, but have no idea how to reset/refresh/restart it.

  • .tmp file is created by NI Report generation toolkit for logging data to MS Excel

    Hi, I am getting ".tmp" file while logging data to MS Excel by NI Report generation toolkit. Instead of assigned file name, toolkit is generating a junk value with .tmp extension, but I can able to open this .tmp file with MS Excel. Can anyone help t

  • Very simple question about formula EXACT

    Hi, i'm new to Numbers. Trying to use the 'exact' formulas. It's not working, so I'm reading the help section about it... The example is the following : =EXACT("toledo"; "toledo") should return a TRUE value. Numbers keeps telling me I have a syntax p