Xorg warnings for fglrx and error for keyboard
HI everyone !
After a recent installation i'm getting some warnings about fglrx and error about keyboard . BUt everything works ok , i just need to disappear those warnings and errors
This is my whole Xorg0.log
[ 59.865]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 59.866] X Protocol Version 11, Revision 0
[ 59.866] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 59.866] Current Operating System: Linux arch 2.6.38-ARCH #1 SMP PREEMPT Mon May 23 22:02:08 CEST 2011 x86_64
[ 59.866] Kernel command line: root=/dev/sda3 ro
[ 59.866] Build Date: 30 May 2011 08:18:15AM
[ 59.866]
[ 59.866] Current version of pixman: 0.22.0
[ 59.866] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 59.867] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 59.867] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 6 18:01:38 2011
[ 59.868] (==) Using config file: "/etc/X11/xorg.conf"
[ 59.868] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 59.868] (==) ServerLayout "aticonfig Layout"
[ 59.868] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 59.868] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 59.868] (**) | |-->Device "aticonfig-Device[0]-0"
[ 59.868] (==) Automatically adding devices
[ 59.868] (==) Automatically enabling devices
[ 59.868] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 59.868] Entry deleted from font path.
[ 59.868] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 59.868] Entry deleted from font path.
[ 59.868] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 59.868] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 59.868] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 59.868] (II) Loader magic: 0x7d3440
[ 59.868] (II) Module ABI versions:
[ 59.868] X.Org ANSI C Emulation: 0.4
[ 59.868] X.Org Video Driver: 10.0
[ 59.868] X.Org XInput driver : 12.2
[ 59.868] X.Org Server Extension : 5.0
[ 59.869] (--) PCI:*(0:1:0:0) 1002:68c1:1025:036e rev 0, Mem @ 0xe0000000/268435456, 0xf2100000/131072, I/O @ 0x00006000/256, BIOS @ 0x????????/131072
[ 59.869] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 59.869] (II) LoadModule: "extmod"
[ 59.870] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 59.870] (II) Module extmod: vendor="X.Org Foundation"
[ 59.870] compiled for 1.10.2, module version = 1.0.0
[ 59.870] Module class: X.Org Server Extension
[ 59.870] ABI class: X.Org Server Extension, version 5.0
[ 59.870] (II) Loading extension MIT-SCREEN-SAVER
[ 59.870] (II) Loading extension XFree86-VidModeExtension
[ 59.870] (II) Loading extension XFree86-DGA
[ 59.870] (II) Loading extension DPMS
[ 59.870] (II) Loading extension XVideo
[ 59.870] (II) Loading extension XVideo-MotionCompensation
[ 59.870] (II) Loading extension X-Resource
[ 59.870] (II) LoadModule: "dbe"
[ 59.870] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 59.870] (II) Module dbe: vendor="X.Org Foundation"
[ 59.870] compiled for 1.10.2, module version = 1.0.0
[ 59.870] Module class: X.Org Server Extension
[ 59.870] ABI class: X.Org Server Extension, version 5.0
[ 59.870] (II) Loading extension DOUBLE-BUFFER
[ 59.870] (II) LoadModule: "glx"
[ 59.870] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 59.871] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 59.871] compiled for 6.9.0, module version = 1.0.0
[ 59.871] (II) Loading extension GLX
[ 59.871] (II) LoadModule: "record"
[ 59.871] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 59.871] (II) Module record: vendor="X.Org Foundation"
[ 59.871] compiled for 1.10.2, module version = 1.13.0
[ 59.871] Module class: X.Org Server Extension
[ 59.871] ABI class: X.Org Server Extension, version 5.0
[ 59.871] (II) Loading extension RECORD
[ 59.871] (II) LoadModule: "dri"
[ 59.872] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 59.872] (II) Module dri: vendor="X.Org Foundation"
[ 59.872] compiled for 1.10.2, module version = 1.0.0
[ 59.872] ABI class: X.Org Server Extension, version 5.0
[ 59.872] (II) Loading extension XFree86-DRI
[ 59.872] (II) LoadModule: "dri2"
[ 59.872] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 59.872] (II) Module dri2: vendor="X.Org Foundation"
[ 59.872] compiled for 1.10.2, module version = 1.2.0
[ 59.872] ABI class: X.Org Server Extension, version 5.0
[ 59.872] (II) Loading extension DRI2
[ 59.872] (II) LoadModule: "fglrx"
[ 59.872] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 59.891] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 59.891] compiled for 1.4.99.906, module version = 8.85.6
[ 59.891] Module class: X.Org Video Driver
[ 59.892] (II) Loading sub module "fglrxdrm"
[ 59.892] (II) LoadModule: "fglrxdrm"
[ 59.892] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 59.892] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 59.892] compiled for 1.4.99.906, module version = 8.85.6
[ 59.892] (II) ATI Proprietary Linux Driver Version Identifier:8.85.6
[ 59.892] (II) ATI Proprietary Linux Driver Release Identifier: 8.85
[ 59.892] (II) ATI Proprietary Linux Driver Build Date: Apr 19 2011 21:30:04
[ 59.892] (--) using VT number 7
[ 59.894] (WW) Falling back to old probe method for fglrx
[ 59.901] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 59.902] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 59.903] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 59.903] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 59.903] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 59.903] (II) AMD Video driver is signed
[ 59.903] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 59.903] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 59.903] (II) fglrx(0): pEnt->device->identifier=0xe53db0
[ 59.903] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 59.903] (II) Loading sub module "vgahw"
[ 59.903] (II) LoadModule: "vgahw"
[ 59.903] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 59.904] (II) Module vgahw: vendor="X.Org Foundation"
[ 59.904] compiled for 1.10.2, module version = 0.1.0
[ 59.904] ABI class: X.Org Video Driver, version 10.0
[ 59.904] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 59.904] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 59.904] (==) fglrx(0): Default visual is TrueColor
[ 59.904] (**) fglrx(0): Option "DPMS" "true"
[ 59.904] (==) fglrx(0): RGB weight 888
[ 59.904] (II) fglrx(0): Using 8 bits per RGB
[ 59.904] (==) fglrx(0): Buffer Tiling is ON
[ 59.904] (II) Loading sub module "fglrxdrm"
[ 59.904] (II) LoadModule: "fglrxdrm"
[ 59.904] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 59.904] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 59.904] compiled for 1.4.99.906, module version = 8.85.6
[ 59.906] ukiDynamicMajor: found major device number 252
[ 59.906] ukiDynamicMajor: found major device number 252
[ 59.906] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 59.906] ukiOpenDevice: node name is /dev/ati/card0
[ 59.906] ukiOpenDevice: open result is 10, (OK)
[ 59.906] ukiOpenByBusid: ukiOpenMinor returns 10
[ 59.906] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 59.906] (==) fglrx(0): NoAccel = NO
[ 59.906] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 59.906] (--) fglrx(0): Chipset: "AMD Radeon HD 6500M/5600/5700 Series" (Chipset = 0x68c1)
[ 59.906] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x036e)
[ 59.906] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 59.906] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 59.906] (--) fglrx(0): MMIO registers at 0xf2100000
[ 59.906] (--) fglrx(0): I/O port at 0x00006000
[ 59.906] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 59.973] (II) fglrx(0): ATIF platform detected
[ 59.976] (II) fglrx(0): AC Adapter is used
[ 59.984] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 60.092] (II) Loading sub module "vbe"
[ 60.092] (II) LoadModule: "vbe"
[ 60.093] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 60.093] (II) Module vbe: vendor="X.Org Foundation"
[ 60.093] compiled for 1.10.2, module version = 1.1.0
[ 60.093] ABI class: X.Org Video Driver, version 10.0
[ 60.093] (II) fglrx(0): VESA BIOS detected
[ 60.093] (II) fglrx(0): VESA VBE Version 3.0
[ 60.093] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 60.093] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 60.093] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[ 60.093] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 60.093] (II) fglrx(0): VESA VBE OEM Product: MADISON
[ 60.093] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 60.136] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 60.136] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 60.136] (II) fglrx(0): PCIE card detected
[ 60.136] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 60.136] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 60.139] (II) fglrx(0): Using adapter: 1:0.0.
[ 60.269] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 60.278] (II) fglrx(0): Interrupt handler installed at IRQ 46.
[ 60.278] (II) fglrx(0): RandR 1.2 support is enabled!
[ 60.278] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 60.278] (==) fglrx(0): Center Mode is disabled
[ 60.278] (II) Loading sub module "fb"
[ 60.278] (II) LoadModule: "fb"
[ 60.278] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 60.278] (II) Module fb: vendor="X.Org Foundation"
[ 60.278] compiled for 1.10.2, module version = 1.0.0
[ 60.278] ABI class: X.Org ANSI C Emulation, version 0.4
[ 60.278] (II) Loading sub module "ddc"
[ 60.278] (II) LoadModule: "ddc"
[ 60.278] (II) Module "ddc" already built-in
[ 60.344] (II) fglrx(0): Finished Initialize PPLIB!
[ 60.344] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 60.345] (II) fglrx(0): Output DFP1 has no monitor section
[ 60.345] (II) fglrx(0): Output CRT1 has no monitor section
[ 60.345] (II) Loading sub module "ddc"
[ 60.345] (II) LoadModule: "ddc"
[ 60.345] (II) Module "ddc" already built-in
[ 60.345] (II) fglrx(0): Connected Display0: LVDS
[ 60.345] (II) fglrx(0): Display0 EDID data ---------------------------
[ 60.345] (II) fglrx(0): Manufacturer: CMO Model: 1599 Serial#: 0
[ 60.345] (II) fglrx(0): Year: 2010 Week: 7
[ 60.345] (II) fglrx(0): EDID Version: 1.3
[ 60.345] (II) fglrx(0): Digital Display Input
[ 60.345] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 60.345] (II) fglrx(0): Gamma: 2.20
[ 60.345] (II) fglrx(0): No DPMS capabilities specified
[ 60.345] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 60.345] (II) fglrx(0): First detailed timing is preferred mode
[ 60.345] (II) fglrx(0): redX: 0.578 redY: 0.339 greenX: 0.312 greenY: 0.556
[ 60.345] (II) fglrx(0): blueX: 0.158 blueY: 0.149 whiteX: 0.313 whiteY: 0.329
[ 60.345] (II) fglrx(0): Manufacturer's mask: 0
[ 60.345] (II) fglrx(0): Supported detailed timing:
[ 60.345] (II) fglrx(0): clock: 75.5 MHz Image Size: 344 x 193 mm
[ 60.345] (II) fglrx(0): h_active: 1366 h_sync: 1426 h_sync_end 1466 h_blank_end 1576 h_border: 0
[ 60.345] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 798 v_border: 0
[ 60.345] (II) fglrx(0): N156B3-L0B
[ 60.345] (II) fglrx(0): CMO
[ 60.345] (II) fglrx(0): N156B3-L0B
[ 60.345] (II) fglrx(0): EDID (in hex):
[ 60.345] (II) fglrx(0): 00ffffffffffff000daf991500000000
[ 60.345] (II) fglrx(0): 07140103802213780a3d9594564f8e28
[ 60.345] (II) fglrx(0): 26505400000001010101010101010101
[ 60.345] (II) fglrx(0): 0101010101017a1d56d250001e303c28
[ 60.345] (II) fglrx(0): 360058c110000018000000fe004e3135
[ 60.345] (II) fglrx(0): 3642332d4c30420a2020000000fe0043
[ 60.345] (II) fglrx(0): 4d4f0a202020202020202020000000fe
[ 60.345] (II) fglrx(0): 004e31353642332d4c30420a20200048
[ 60.345] (II) fglrx(0): End of Display0 EDID data --------------------
[ 60.351] (II) fglrx(0): EDID for output LVDS
[ 60.351] (II) fglrx(0): Manufacturer: CMO Model: 1599 Serial#: 0
[ 60.351] (II) fglrx(0): Year: 2010 Week: 7
[ 60.351] (II) fglrx(0): EDID Version: 1.3
[ 60.351] (II) fglrx(0): Digital Display Input
[ 60.351] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 60.351] (II) fglrx(0): Gamma: 2.20
[ 60.351] (II) fglrx(0): No DPMS capabilities specified
[ 60.351] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 60.351] (II) fglrx(0): First detailed timing is preferred mode
[ 60.351] (II) fglrx(0): redX: 0.578 redY: 0.339 greenX: 0.312 greenY: 0.556
[ 60.351] (II) fglrx(0): blueX: 0.158 blueY: 0.149 whiteX: 0.313 whiteY: 0.329
[ 60.351] (II) fglrx(0): Manufacturer's mask: 0
[ 60.351] (II) fglrx(0): Supported detailed timing:
[ 60.351] (II) fglrx(0): clock: 75.5 MHz Image Size: 344 x 193 mm
[ 60.351] (II) fglrx(0): h_active: 1366 h_sync: 1426 h_sync_end 1466 h_blank_end 1576 h_border: 0
[ 60.351] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 798 v_border: 0
[ 60.351] (II) fglrx(0): N156B3-L0B
[ 60.351] (II) fglrx(0): CMO
[ 60.351] (II) fglrx(0): N156B3-L0B
[ 60.351] (II) fglrx(0): EDID (in hex):
[ 60.351] (II) fglrx(0): 00000000000000003a20454449442028
[ 60.351] (II) fglrx(0): 696e20686578293a0a002020000a0028
[ 60.351] (II) fglrx(0): 26505400000001015100000000000000
[ 60.351] (II) fglrx(0): 00000000000000003a20466972737420
[ 60.351] (II) fglrx(0): 64657461696c65642074696d696e6720
[ 60.351] (II) fglrx(0): 697320707265666572726564206d6f64
[ 60.351] (II) fglrx(0): 650a000a0020202020202020000000fe
[ 60.351] (II) fglrx(0): 004e31353642332d4100000000000000
[ 60.351] (II) fglrx(0): EDID vendor "CMO", prod id 5529
[ 60.351] (II) fglrx(0): Printing DDC gathered Modelines:
[ 60.351] (II) fglrx(0): Modeline "1366x768"x0.0 75.46 1366 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Printing probed modes for output LVDS
[ 60.351] (II) fglrx(0): Modeline "1366x768"x60.0 75.46 1366 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1360x768"x60.0 75.46 1360 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1280x768"x60.0 75.46 1280 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1280x720"x60.0 75.46 1280 1426 1466 1576 720 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1024x768"x60.0 75.46 1024 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1024x600"x60.0 75.46 1024 1426 1466 1576 600 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "800x600"x60.0 75.46 800 1426 1466 1576 600 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "800x480"x60.0 75.46 800 1426 1466 1576 480 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "640x480"x60.0 75.46 640 1426 1466 1576 480 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): EDID for output DFP1
[ 60.351] (II) fglrx(0): EDID for output CRT1
[ 60.351] (II) fglrx(0): Output LVDS connected
[ 60.351] (II) fglrx(0): Output DFP1 disconnected
[ 60.351] (II) fglrx(0): Output CRT1 disconnected
[ 60.351] (II) fglrx(0): Using exact sizes for initial modes
[ 60.351] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 60.351] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 60.351] (II) fglrx(0): DPI set to (102, 102)
[ 60.351] (II) fglrx(0): Adapter AMD Radeon HD 6500M/5600/5700 Series has 2 configurable heads and 1 displays connected.
[ 60.351] (==) fglrx(0): PseudoColor visuals disabled
[ 60.351] (II) Loading sub module "ramdac"
[ 60.351] (II) LoadModule: "ramdac"
[ 60.351] (II) Module "ramdac" already built-in
[ 60.352] (==) fglrx(0): NoDRI = NO
[ 60.352] (==) fglrx(0): Capabilities: 0x00000000
[ 60.352] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 60.352] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 60.352] (==) fglrx(0): UseFastTLS=0
[ 60.352] (==) fglrx(0): BlockSignalsOnLock=1
[ 60.352] (--) Depth 24 pixmap format is 32 bpp
[ 60.352] (II) Loading extension ATIFGLRXDRI
[ 60.352] (II) fglrx(0): doing swlDriScreenInit
[ 60.352] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 60.352] ukiDynamicMajor: found major device number 252
[ 60.352] ukiDynamicMajor: found major device number 252
[ 60.352] ukiDynamicMajor: found major device number 252
[ 60.352] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 60.352] ukiOpenDevice: node name is /dev/ati/card0
[ 60.352] ukiOpenDevice: open result is 15, (OK)
[ 60.352] ukiOpenByBusid: ukiOpenMinor returns 15
[ 60.352] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 60.352] (II) fglrx(0): [uki] DRM interface version 1.0
[ 60.352] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 60.352] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x8e000
[ 60.352] (II) fglrx(0): [uki] mapped SAREA 0x8e000 to 0x7faa77519000
[ 60.352] (II) fglrx(0): [uki] framebuffer handle = 0x8f000
[ 60.352] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 60.352] (II) fglrx(0): swlDriScreenInit done
[ 60.352] (II) fglrx(0): Kernel Module Version Information:
[ 60.352] (II) fglrx(0): Name: fglrx
[ 60.352] (II) fglrx(0): Version: 8.85.6
[ 60.352] (II) fglrx(0): Date: Apr 19 2011
[ 60.352] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 60.352] (II) fglrx(0): Kernel Module version matches driver.
[ 60.352] (II) fglrx(0): Kernel Module Build Time Information:
[ 60.352] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.38-ARCH
[ 60.352] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 60.352] (II) fglrx(0): Build-Kernel __SMP__: no
[ 60.352] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 60.352] (II) fglrx(0): [uki] register handle = 0x00090000
[ 60.369] (II) fglrx(0): DRI initialization successfull
[ 60.369] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[ 60.369] (==) fglrx(0): Backing store disabled
[ 60.369] (II) Loading extension FGLRXEXTENSION
[ 60.369] (**) fglrx(0): DPMS enabled
[ 60.369] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 60.369] (**) fglrx(0): Textured Video is enabled.
[ 60.369] (II) LoadModule: "glesx"
[ 60.370] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 60.370] (II) Module glesx: vendor="X.Org Foundation"
[ 60.370] compiled for 1.4.99.906, module version = 1.0.0
[ 60.370] (II) Loading extension GLESX
[ 60.370] (II) fglrx(0): GLESX enableFlags = 592
[ 60.370] (II) fglrx(0): GLESX is enabled
[ 60.370] (II) LoadModule: "amdxmm"
[ 60.371] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 60.371] (II) Module amdxmm: vendor="X.Org Foundation"
[ 60.371] compiled for 1.4.99.906, module version = 2.0.0
[ 60.380] (II) Loading extension AMDXVOPL
[ 60.380] (II) Loading extension AMDXVBA
[ 60.381] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 60.384] (II) fglrx(0): Enable composite support successfully
[ 60.384] (WW) fglrx(0): Option "VendorName" is not used
[ 60.384] (WW) fglrx(0): Option "ModelName" is not used
[ 60.384] (II) fglrx(0): X context handle = 0x1
[ 60.384] (II) fglrx(0): [DRI] installation complete
[ 60.384] (==) fglrx(0): Silken mouse enabled
[ 60.384] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 60.384] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 60.384] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 60.384] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 61.343] (--) RandR disabled
[ 61.343] (II) Initializing built-in extension Generic Event Extension
[ 61.343] (II) Initializing built-in extension SHAPE
[ 61.343] (II) Initializing built-in extension MIT-SHM
[ 61.343] (II) Initializing built-in extension XInputExtension
[ 61.343] (II) Initializing built-in extension XTEST
[ 61.343] (II) Initializing built-in extension BIG-REQUESTS
[ 61.343] (II) Initializing built-in extension SYNC
[ 61.343] (II) Initializing built-in extension XKEYBOARD
[ 61.343] (II) Initializing built-in extension XC-MISC
[ 61.343] (II) Initializing built-in extension SECURITY
[ 61.343] (II) Initializing built-in extension XINERAMA
[ 61.343] (II) Initializing built-in extension XFIXES
[ 61.343] (II) Initializing built-in extension RENDER
[ 61.343] (II) Initializing built-in extension RANDR
[ 61.343] (II) Initializing built-in extension COMPOSITE
[ 61.343] (II) Initializing built-in extension DAMAGE
[ 61.345] ukiDynamicMajor: found major device number 252
[ 61.346] ukiDynamicMajor: found major device number 252
[ 61.346] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 61.346] ukiOpenDevice: node name is /dev/ati/card0
[ 61.346] ukiOpenDevice: open result is 16, (OK)
[ 61.346] ukiOpenByBusid: ukiOpenMinor returns 16
[ 61.346] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 61.456] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 61.472] (II) fglrx(0): Enable the clock gating!
[ 61.473] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 61.607] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 61.607] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 61.607] (II) LoadModule: "evdev"
[ 61.607] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 61.608] (II) Module evdev: vendor="X.Org Foundation"
[ 61.608] compiled for 1.10.0, module version = 2.6.0
[ 61.608] Module class: X.Org XInput Driver
[ 61.608] ABI class: X.Org XInput driver, version 12.2
[ 61.608] (II) Using input driver 'evdev' for 'Power Button'
[ 61.608] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 61.608] (**) Power Button: always reports core events
[ 61.608] (**) Power Button: Device: "/dev/input/event5"
[ 61.630] (--) Power Button: Found keys
[ 61.630] (II) Power Button: Configuring as keyboard
[ 61.630] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 61.630] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 61.630] (**) Option "xkb_rules" "evdev"
[ 61.630] (**) Option "xkb_model" "evdev"
[ 61.630] (**) Option "xkb_layout" "us"
[ 61.670] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 61.670] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 61.670] (II) Using input driver 'evdev' for 'Video Bus'
[ 61.670] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 61.670] (**) Video Bus: always reports core events
[ 61.670] (**) Video Bus: Device: "/dev/input/event6"
[ 61.686] (--) Video Bus: Found keys
[ 61.686] (II) Video Bus: Configuring as keyboard
[ 61.686] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:01/input/input6/event6"
[ 61.686] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 61.686] (**) Option "xkb_rules" "evdev"
[ 61.686] (**) Option "xkb_model" "evdev"
[ 61.686] (**) Option "xkb_layout" "us"
[ 61.983] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 61.983] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 61.983] (II) Using input driver 'evdev' for 'Power Button'
[ 61.983] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 61.984] (**) Power Button: always reports core events
[ 61.984] (**) Power Button: Device: "/dev/input/event2"
[ 62.000] (--) Power Button: Found keys
[ 62.000] (II) Power Button: Configuring as keyboard
[ 62.000] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 62.000] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 62.000] (**) Option "xkb_rules" "evdev"
[ 62.000] (**) Option "xkb_model" "evdev"
[ 62.000] (**) Option "xkb_layout" "us"
[ 62.000] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 62.000] (II) No input driver/identifier specified (ignoring)
[ 62.000] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 62.000] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 62.000] (II) Using input driver 'evdev' for 'Sleep Button'
[ 62.001] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.001] (**) Sleep Button: always reports core events
[ 62.001] (**) Sleep Button: Device: "/dev/input/event3"
[ 62.040] (--) Sleep Button: Found keys
[ 62.040] (II) Sleep Button: Configuring as keyboard
[ 62.040] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 62.040] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 62.040] (**) Option "xkb_rules" "evdev"
[ 62.040] (**) Option "xkb_model" "evdev"
[ 62.040] (**) Option "xkb_layout" "us"
[ 62.044] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event9)
[ 62.044] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 62.044] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 62.044] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.044] (**) Microsoft Wired Keyboard 600: always reports core events
[ 62.044] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event9"
[ 62.066] (--) Microsoft Wired Keyboard 600: Found keys
[ 62.066] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
[ 62.066] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input9/event9"
[ 62.066] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
[ 62.066] (**) Option "xkb_rules" "evdev"
[ 62.066] (**) Option "xkb_model" "evdev"
[ 62.066] (**) Option "xkb_layout" "us"
[ 62.067] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event10)
[ 62.067] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 62.067] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 62.067] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.067] (**) Microsoft Wired Keyboard 600: always reports core events
[ 62.067] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event10"
[ 62.093] (--) Microsoft Wired Keyboard 600: Found 1 mouse buttons
[ 62.093] (--) Microsoft Wired Keyboard 600: Found scroll wheel(s)
[ 62.093] (--) Microsoft Wired Keyboard 600: Found relative axes
[ 62.093] (--) Microsoft Wired Keyboard 600: Found absolute axes
[ 62.093] (--) Microsoft Wired Keyboard 600: Found x and y absolute axes
[ 62.093] (--) Microsoft Wired Keyboard 600: Found keys
[ 62.093] (II) Microsoft Wired Keyboard 600: Configuring as mouse
[ 62.093] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
[ 62.093] (II) Microsoft Wired Keyboard 600: Adding scrollwheel support
[ 62.093] (**) Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[ 62.093] (**) Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 62.093] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input10/event10"
[ 62.093] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
[ 62.093] (**) Option "xkb_rules" "evdev"
[ 62.093] (**) Option "xkb_model" "evdev"
[ 62.093] (**) Option "xkb_layout" "us"
[ 62.093] (EE) Microsoft Wired Keyboard 600: failed to initialize for relative axes.
[ 62.093] (WW) Microsoft Wired Keyboard 600: found 37 axes, limiting to 36.
[ 62.094] (II) Microsoft Wired Keyboard 600: initialized for absolute axes.
[ 62.094] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[ 62.094] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[ 62.094] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[ 62.094] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[ 62.094] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[ 62.094] (II) No input driver/identifier specified (ignoring)
[ 62.095] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event14)
[ 62.095] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 62.095] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 62.095] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.095] (**) Razer Razer DeathAdder: always reports core events
[ 62.095] (**) Razer Razer DeathAdder: Device: "/dev/input/event14"
[ 62.120] (--) Razer Razer DeathAdder: Found 12 mouse buttons
[ 62.120] (--) Razer Razer DeathAdder: Found scroll wheel(s)
[ 62.120] (--) Razer Razer DeathAdder: Found relative axes
[ 62.120] (--) Razer Razer DeathAdder: Found x and y relative axes
[ 62.120] (II) Razer Razer DeathAdder: Configuring as mouse
[ 62.120] (II) Razer Razer DeathAdder: Adding scrollwheel support
[ 62.120] (**) Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 62.120] (**) Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 62.120] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input14/event14"
[ 62.120] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE)
[ 62.120] (II) Razer Razer DeathAdder: initialized for relative axes.
[ 62.120] (**) Razer Razer DeathAdder: (accel) keeping acceleration scheme 1
[ 62.120] (**) Razer Razer DeathAdder: (accel) acceleration profile 0
[ 62.120] (**) Razer Razer DeathAdder: (accel) acceleration factor: 2.000
[ 62.120] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 4
[ 62.120] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse1)
[ 62.120] (II) No input driver/identifier specified (ignoring)
[ 62.121] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event8)
[ 62.121] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[ 62.121] (II) Using input driver 'evdev' for '1.3M WebCam'
[ 62.121] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.121] (**) 1.3M WebCam: always reports core events
[ 62.121] (**) 1.3M WebCam: Device: "/dev/input/event8"
[ 62.146] (--) 1.3M WebCam: Found keys
[ 62.146] (II) 1.3M WebCam: Configuring as keyboard
[ 62.146] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input8/event8"
[ 62.146] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD)
[ 62.146] (**) Option "xkb_rules" "evdev"
[ 62.146] (**) Option "xkb_model" "evdev"
[ 62.146] (**) Option "xkb_layout" "us"
[ 62.147] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 62.147] (II) No input driver/identifier specified (ignoring)
[ 62.147] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event12)
[ 62.147] (II) No input driver/identifier specified (ignoring)
[ 62.148] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event13)
[ 62.148] (II) No input driver/identifier specified (ignoring)
[ 62.149] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 62.149] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 62.149] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 62.149] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.149] (**) AT Translated Set 2 keyboard: always reports core events
[ 62.149] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 62.173] (--) AT Translated Set 2 keyboard: Found keys
[ 62.173] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 62.173] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 62.173] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 62.173] (**) Option "xkb_rules" "evdev"
[ 62.173] (**) Option "xkb_model" "evdev"
[ 62.173] (**) Option "xkb_layout" "us"
[ 62.174] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 62.174] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 62.174] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 62.174] (II) LoadModule: "synaptics"
[ 62.174] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 62.174] (II) Module synaptics: vendor="X.Org Foundation"
[ 62.174] compiled for 1.10.2, module version = 1.4.0
[ 62.174] Module class: X.Org XInput Driver
[ 62.174] ABI class: X.Org XInput driver, version 12.2
[ 62.174] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 62.174] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 62.174] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 62.174] (**) Option "Device" "/dev/input/event7"
[ 62.306] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5772
[ 62.306] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5086
[ 62.306] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 62.306] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 62.306] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 62.306] (**) Option "TapButton1" "1"
[ 62.306] (**) Option "TapButton2" "2"
[ 62.306] (**) Option "TapButton3" "3"
[ 62.413] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 62.413] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 62.466] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 62.466] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 62.466] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 62.466] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 62.466] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035
[ 62.467] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 62.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 62.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 62.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 62.546] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 62.547] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 62.547] (II) No input driver/identifier specified (ignoring)
[ 62.547] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 62.547] (II) No input driver/identifier specified (ignoring)
[ 62.559] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 62.905] (II) fglrx(0): EDID vendor "CMO", prod id 5529
[ 62.905] (II) fglrx(0): Printing DDC gathered Modelines:
[ 62.905] (II) fglrx(0): Modeline "1366x768"x0.0 75.46 1366 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 76.015] (II) fglrx(0): EDID vendor "CMO", prod id 5529
[ 76.015] (II) fglrx(0): Printing DDC gathered Modelines:
[ 76.015] (II) fglrx(0): Modeline "1366x768"x0.0 75.46 1366 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 76.610] Warning: LookupWindow()/SecurityLookupWindow() are deprecated. Please convert your driver/module to use dixLookupWindow().
And here is my xorg.conf file , basically it's the same at aticonfig --initial , i didn't change anything yet
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
If anyone knows what's going on , and how i can disappear those messages , and if someone has any suggestions i would be grateful if you could help me out .
Thanks in advance !!!
Thanks for posting this wizzard. After an upgrade of xorg I have been struggling to make a conf file that worked. Adding to a minimal file is easier than pruning a full one. I used your minimal xorg.conf and added:
Option "PreferredMode" "1280x1024"
in the monitor section and now all is well. (I think my monitor is non-standards-compliant. It causes problems so the option is needed)
Last edited by greenfuse (2008-12-02 08:34:12)
Similar Messages
-
Post installation for Portal and errors for new system
I've recently installed a NW 7 based ABAPJAVA System with Portal Components (EPEP Core) on Windows + Oracle for demo.
1 ) Since, I am facing a lot of errors after the installation, I think I have missed to carry out some post-install steps. Can someone please suggest on the post-installation steps in some detail ??
2) When I try to open the newly installed portal using http://fqdn_host:50000/irj ; the browser shows some exception has occurred: However, I tried to restart the system (everything including db) as suggested in some of the other links and login went fine.
After I logged in to the portal (/irj) as j2ee_admin; I am trying to open Content Administration --> Portal Content OR System Administration -> Transport OR --> System Configuration etc ; but I am getting the error coded below::
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.portal.layoutPortal1_WAandNavPanel
Component Name : com.sap.portal.layouts.framework.WAandNavPanel
Error occurs during the rendering of jsp component.
Exception id: 05:05_25/03/10_0032_7012350
See the details for the exception ID in the log file
The log file (that I believe is the trace file in cluster/server0/log/defaultTrace.0.trc) says (This gives several such exceptions listed in the file.) (I'll put the log as a comment to the post because of the limit on max characters)
Note that the link http://punitp84712d:50000/nwa works absolutely fine. PFB the J2EE process details.
J2EE Process Details
Name Type PID Status Debug
Dispatcher ID7012300 J2EE Dispatcher 3,240 Running Disabled
SDM SDM Server 4,736 Running Switched off
Server0 ID7012350 J2EE Server 596 Running Disabled
Can someone please help me through this and let me know how did you draw your inference. Let me know if there is any other place that can give me more information / logs on the error.
Thanks,Hi Jay,
Please check that server is Running but not able to open some application. I would suggest to check the Enviromental Variable for My Computer :-
- Database Enviromental variable is added or not under "user vairable for <UserID for Server Desktop>
- Check JAVA_HOME Enviromental variable is added or not under "System Variable'
Check at (My computer > Properties >> Advance >> Startup and Recovery >> Enviromental Variable >> System Variables/User varaible
Update your server IP address and host name in host file entry at (RUN > drivers > etc > host file) and check database server services (Run > Services.msc >> Start your database services manually and change prperties as automatic)
Then try to open portal URL http://<Host>:<Port>/irj/portal or http://<Host>:<Port>/index.html
Hope it helps
Regards
Arun -
I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.
It sounds as if your browser and some of your apps are not color-managed. This is pretty typical. Even IE9 is only partially color-managed.
You can expect color-managed and non-color-managed applications to show you different things with the same images. How different will depend upon how different your monitor color profile is from the image's color profile.
For web publication and most general use, experts usually advise saving images with the sRGB profile. If such images, saved through the Save for Web & Devices function, look different to you than you expect, it may be that your input images have previously been saved in another color space.
You should really try to get your head around color-management by reading more on it. It can seem baffling and it's difficult to understand without some background. A quick web search turns up many overviews. Beware, though, even people writing articles sometimes don't fully understand it.
-Noel -
I could not install the upgrade for iTunes and Error Message said " Can't start because MSVCR80.dll is missing". Reinstalling has NOT helped. . Is the fault with the Apple iTunes upgrade?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique. -
So is it just me, or is Mavericks a bust? My MBP runs much hotter since the upgrade. Why do I need ot sit around watching Activity Monitor, manually controlling my fans, and deleting extensions that I enjoy using. Don't even get me started on the Quicktime/Mov issues. I had none of these issues on Mountian Lion. Searching these forums, I see it's not just me. Why would Apple release a new system w/o peoperly testing it on MBPs?
I don't have time for trial and error solutions. I've tried the obvious ones. No help. Is Apple offering a way to downgrade back to Mountain lion? Or better yet, a Mavericks update that adresses these problems? As of now, I want out of Mavericks ASAP.
My processor is 2.6 GHz Intel Core i7.
8 GB 1600 MHZ DDR3 memory.
13inch MBP purchased ust over a year ago- 1-13.jonny a wrote:
Nope, it'a not just me, see above. And yup- I'm backed up, But I don't own a Mountain lion install disc. That's why I was posting here in the first place. Thanks
Nobody owns a ML install disc - ML was only ever distributed as a download from the Mac App Store.
If you have a Time Machine backup, you can boot into recovery mode and restore from your Moutain Lion TM backup volume. If you have a system clone, then you can boot from the clone, and just clone ML back onto your internal drive.
Going back to your previous installation from a backup should be trivially simply if you have the backup in hand. -
What are the settings for datasource and infopackage for flat file loading
hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumarLoading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets. -
Pl find out the reason for VC Cycle error for vendor 105191
I had checked entire cycle of Valuation Class(MM42), Tax Code(ME12), validity period, MC Code
in the contract as per the proforma invoice 12738 for vendor 105191 - VC Parties, found ok.
Pl find out the reason for VC Cycle error for vendor 105191
" Unable to create consignment commision - FI/CO"
" Interface : inconsistent FI/CO line item data"I've used the CS6 AUTOMATE|PHOTOMERGE command many times. Today I ended up with the Error 22 message. After reading your message I did a search on my Win7 Pro 64 bit machine and got a number of hits for "scriptingsupport.8li".
1 for CS6 (on my machine)
2 for CS5 (no longer on my machine)
2 for Elements 8 (no longer on my machine but I DO have Elements 10 & 11 on it)
2 for CS# (no longer on my machine)
QUESTION: Should I delete some of these and which? Will deletion(s) suffice? -
I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?
Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both. -
please help me fix this problem I have one id for icloud and one for itunes that i share with my husband
If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
Can you have two Apple IDs on one IPAD? One for school and one for home?
Can you have two Apple IDs on one IPAD? One for school and one for home?
If so do you know how to do it?It depends on what you want to do.
You could, for example, have one AppleID for iCloud backup [and therefore message syncing, notes syncing, etc] and a second one for iTunes [music, iBooks, etc].
But if you are looking for a way to flip everything between different appleIDs, then no. -
Idoc for materials and service for same contract.
Dear All
I have an scope where i have to migrate the data for material and services for the same contract.Is there an Idoc which does it so or otherwise ?Earlier in scope materials contracts have been loaded with the help of idoc type :- PURCONTRACT_CREATE01 and that of Service Contract using Idoc type :- BLAORD03.No customization is however permitted .Tcode for the same is ME32K.
Regards
SomnathHi,
It is not clear to me if you are working with sapscript or smartforms.
You have only to find a variable which identifies the kind of invoice
I do not know that variable so i use an example variable
for sapscript:
/: IF &VBDKR-FKTYP& = '1'
/ INVOICE
/: ELSE
/ SERVICE ORDER
/: ENDIF.
In a smartform you can also do something like that.
but There you work with conditions (eq, BOOLEAN)
You have only to find the right variable
success,
Gr., Frank -
i bought 4 apps 1. the sims 3 for £4.99 2. fifa 14 premium pack for £2.99 3. plauge inc for 99p and monopoly for 69p i bought a £15 app store voucher and i only have £1.66 left but i should have £5.34 left please help me
Three possible causes:
- You got charged twice. On a computer go to iTunes Store>View Account>Purchase History and see what you got charged for
- Maybe the difference is due to tax. Again the Purchase History will list the total price including tax for each purchase.
- You had a negative balance (you owed money) before you redeemed the card.
If problems contact iTunes:
Contact iTunes -
I have multiple devices (iMacs, Lap tops, Ipads) all connected to a Nas Drive. Can I create a user for myself and one for my wife and we each have our own apple ID's, Itunes etc, but share the same data on the hard drives? So when she logs in, and sync's her ipads, they will sync with her stuff and when I do the same under my user account, on the same device, my ipads will sync with my stuff?
You can share the same Apple ID for purchasng form the iTunes and app stores without any problems, but you should all used separate iCloud accounts with separate Apple IDs. (You are not required to use the same ID for iCloud and other services as you do for the iTunes store.) This will prevent you from ending up with merged data. You should also use separate Apple IDs for iMessage and FaceTime or you will end up getting each other's text messages and FaceTime calls.
This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/, as well as this video: http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l. -
How can I have one "family" Apple ID and two icloud accounts one for me and one for the wife?
MacVirgin!Just got new Air and iMac (iphones on the way). How can I have one Apple ID but two iCloud accounts (one for me and one for my wife)? I have set up one iCloud account and am attempting to share contacts between iMac, iCloud and Air, however iMac and iCloud are not in sync? I must be missing something very simple.
ok. I set up the imac and Air with one user account. this was used to activae iCloud on both machines and I have now se up one iCloud account and managed to share calander and contacts between the two. Ultimately both me and my wife will have an iphone and we wish to share calenders and contacts. We both also use the imac and air on one user account. It looks like I need to set another user account then activate iCloud in my wifes Apple ID
-
Can I have 2 itunes accounts on one computer, one for me and one for my wife. We want to synchronize different content to our iPhones.
HELLO EVERYONE,
WELL I HAVE TWO ACCOUNTS TOO... ONE FOR MY BROTHER AND ONE FOR ME...
THIS IS WHAT YOU WILL HAVE TO DO..
EVERYTIME YOU OR YOUR WIFE LOG ON TO ITUNES YOU WILL HAVE TO GO TO THE TOP LEFT AND AT THE TOP IT WILL SAY STORE..
YOU WILL HIT LOG OUT AND LOG OUT OF YOURS..
THEN GO TO THE SAME PLACE AGAIN AND HIT LOG IN AND THAT SHOULD HOPEFULLY HELP..
ANYTIME YOU HAVE A QUESTION JUST GO TO MY PAGE AND ASK ME[:
THANKS,
BK[:
Maybe you are looking for
-
Can't delete music on phone and the songs don't show up in iTunes
I've had this problem before and found no solution, so this time I'm going to ask and see if someone else has the same issue. It's not any of the usual problems, so I ended up restoring my phone to an earlier point and it worked, but I don't want to
-
Block database access using toad or other tools
We have a forms application running on oracle database 10g release 2, with the users created in the application the database can be accessed using the same id's through sql plus or any other tool. We have already restricted sql plus access by product
-
Why won't my imatch upload cds I downloaded onto my iphone?
why won't my imatch upload cds I downloaded onto both my computers onto my iphone?
-
Hello folks, I'm looking for material (books or anything) describing the developement of effective algorithms in ABAP, and the measurement of the performance of the used concepts. I'm thinking about the possibility to write my Bachelor Thesis about a
-
I cant access my photos from3.2
I cant access my photos from 3.2