XP-64 - NO PDF printer installed with AA9 PRO
Installed, uninstalled, reinstalled -- still no PDF printer. Do I need to go back to AA8 Pro to be able to create PDF's with XP-64?
Seems AA9 Pro is an expensive PDF READER only.
Update to AA9 PRO SAGA:
Having spent the best part of a week sorting out this mess I have finally got this working.
Having re-installed CS3 design premium, my event log was totally filled with Version Cue 3 errors, see:
http://www.pbase.com/jacquidervan/image/100016762.gif
and
http://www.pbase.com/jacquidervan/image/100016790.gif
This prompted me to do a repair to Version Cue CS3 which basically seemed to re-install everything.
Following that repair I was unable to update Illustrator from 13 to 13.0.1 or 13.0.2. The automatic updater failed and the manual updates also failed, although at one stage when trying to update to 13.0.1, the installer reported that it had already been installed, although the Illustrator splash still reported version 13.0.0.
See: http://www.adobeforums.com/webx/.3bc43ec4/48
I completely uninstalled CS3 [again] and re-installed everything except AA8 PRO. Again, the automatic updater failed to update Illustrator. I ran the manual updater, and much to my amazement, it updated, both 13.01 and 13.02. The version cue errors are also gone.
Feeling that it was my lucky day, I proceeded to take a chance and install AA9 PRO. It installed without error ...but did not install the printer.
I followed the advice in these forums here to install the printer as described in post #25:
TEW, "Adobe PDF Printer Missing Fix - Adobe Acrobat 8.1 - Vista" #1, 31 Jul 2007 5:00 am
I then ran a repair on AA9 PRO and I now have 2 (two) printers: "Adobe PDF Converter" and "Adobe PDF".
To say that this has been an inconvenience would be an understatement.
Similar Messages
-
ADOBE PDF printer setting with joboptions?
Hi all,
I have adobe pdf printer installed in my win7 pc and I know I can edit the settings manually but is there any way I can use my existing joboptions file?
Thanks in advance.
Arjunhi anubha,
thanks again but i know this distiller settings and setting up watch
folders and i have more than 5 watch folders with different joboptions
settings.
what i need is to use one particular joboption file to use in adobe pdf
printer. presently i set all the parameters in adobe pdf printer setting
but wonder if a joboption file can be used to set the adobe pdf printer.
On Mon, Mar 30, 2015 at 11:39 AM, Anubha Goel <[email protected]> -
Does a dell c2660dn printer work with macbook pro?
does a dell c2660dn printer work with macbook pro?
According to their site, they offer no drivers for Mac, or mention anything about Apple.
I would say no. -
How do I create a PDF fillable form with adobe pro 10
How do I create a PDF fillable form with adobe pro 10
You need to open the "Tools" panel and select the "Forms" category to access all the tools for creating form fields.
TOP 10 coolest new Acrobat XI features
Form tutorials -
Does the MS Office come already installed with Macbook Pro, coz i dont seem to find it in my Mac? Kindly advise. Thanks!
No it doesn't. You need to purchase it from Microsoft.
-
Problem with pdf-printing in Adobe Acrobat Pro
Hi,
I have Adobe Acrobat Pro 9.4.3.
PDF-printing has always worked great but suddenly there is some kind of problem.
After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
Read about the problem here: http://www.tidbits.com/article/12078 -
How to get PDF Printing working with APEX packed with 11g
Hi ,
Recently i installed 11g db on one of my systems (Windows XP) ,as it comes with APEX i thought to move my apex app(which were in 10g) to the same .........when i moved my apps , i got everything working but PDF PRINTING .
I have configured Report Printing :
Print server: Advanced
Print server Protocol: HTTP
Print server Host Address: localhost
Print Server Port: 9704
Print server script :/xmlpserver/convert
Your help is appreciated.
Thanks ,
RibhiHi Jes,
Thank you for your reply. BI Publisher is runing on the same server where Database 11g with APEX installed. I loged in to the database as SYS DBA and copied and paste Oracle script below to enable Network services. The script run successfully, still cant print. Pls Help me to solve this problem.
Regards,
Ribhi
DECLARE
ACL_PATH VARCHAR2(4000);
ACL_ID RAW(16);
BEGIN
-- Look for the ACL currently assigned to '*' and give FLOWS_030100
-- the "connect" privilege if FLOWS_030100 does not have the privilege yet.
SELECT ACL INTO ACL_PATH FROM DBA_NETWORK_ACLS
WHERE HOST = '*' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
-- Before checking the privilege, make sure that the ACL is valid
-- (for example, does not contain stale references to dropped users).
-- If it does, the following exception will be raised:
-- ORA-44416: Invalid ACL: Unresolved principal 'FLOWS_030100'
-- ORA-06512: at "XDB.DBMS_XDBZ", line ...
SELECT SYS_OP_R2O(extractValue(P.RES, '/Resource/XMLRef')) INTO ACL_ID
FROM XDB.XDB$ACL A, PATH_VIEW P
WHERE extractValue(P.RES, '/Resource/XMLRef') = REF(A) AND
EQUALS_PATH(P.RES, ACL_PATH) = 1;
DBMS_XDBZ.ValidateACL(ACL_ID);
IF DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE(ACL_PATH, 'FLOWS_030100',
'connect') IS NULL THEN
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(ACL_PATH,
'FLOWS_030100', TRUE, 'connect');
END IF;
EXCEPTION
-- When no ACL has been assigned to '*'.
WHEN NO_DATA_FOUND THEN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('power_users.xml',
'ACL that lets power users to connect to everywhere',
'FLOWS_030100', TRUE, 'connect');
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('power_users.xml','*');
END;
COMMIT;
Edited by: Ribhi on Nov 13, 2008 1:18 PM -
What is the procedure to install the pdf printer in CS 6?
Install Acrobat. For further information, consult the CS forum. http://forums.adobe.com/community/creativesuites
-
Adobe can't find PDF Printer installed. How do I correct this?
Adobe can't find installed PDF Printer therefore I can't convert PDF to Word. Worked on old Win 7 computer. How do I correct this on Win. *.1 computer?
Hi Lchepo,
What version of Windows are you running? Were you able to install the printer on your new computer? If you have the printer installer, you may be able to install it on your new operating system.
I took a look at your account, however, and noticed that you don't have a subscription to Adobe PDF Pack (which you would need to download the printer).
One option, that might be easiest in the short term (as the PDF Printer is going to be retired soon, anyway), is to download a free trial of Acrobat (see www.adobe.com/products/acrobat.html). You would be able to create files to PDF directly from within Acrobat.
Please let us know if you have additional questions.
Best,
Sara -
Printing problem with Acrobat Pro 10.1
I get an "Insufficient memory" message on my LaserJet printer when trying to print certain PDFs using Acrobat Pro 10.1, but the PDFs are printed without any problem from Acrobat Pro 9 or Preview. Does anybody else have this problem?
Thanks for responding I was using an MS Excel spreadsheet to merge details to produce labels in a programme called NiceLabel Pro. The information from the spreadsheet was very simple - a readable code number and a QR code. In the Nice Label document setup you nominate the printer - in my case this was the Adobe PDF printer - to produce a Press Ready quality PDF file. I tried several times to print this file and each time ended up with page 1. As the job was urgent and I had a deadline to meet, I ended up installing a programme called Nitro - which also produces PDF - to complete the job, without a problem. However, I would prefer to stick with my Adobe Acrobat software as the other alternative is limited in its pre-press options. Hope this information will enable a solution to the problem.
- Thanks, Lynne
Hi again Dov - have you been able to come up with an answer to my Acrobat problem. Would like to begin 2015 with workable Acrobat.
Many thanks - Lynne -
Printer problems with Officejet Pro 8500 A910
Dear all,
I have been given as a present an Officejet Pro 8500 A910 (serie number CN16LDM020 and product number CM756A). The people whom I have got it from already had some problems with the printer heads. I have accepted the printer, because I want to have it working again. I do encounter some problems however. I hope you kind people on the forum can help me out and get this thing working again. As a side note: I am only interested in using the scanner, printer (only black and white - I do not print in colour) and e-printing (I understand that it is possible to email documents to printer, so that they are printed whilst you are somewhere else).
Upon installation I have conneted the internet to my wi-fi. Upon installation it made some test prints, whereby the black dots were good, but the cyan and other colours were not. When I now turn off the installed printer and switch it on again it takes the printer about 5 - 7 minutes to initialize. On the touch screen of the printer it is said "Checking printer, this might take 5 minutes", "Checking printheads", "Aligning printheads" and alike notifications. After 5 - 7 minutes the printer gives the following notification: " Failure notice. Alignment failed. Refer to device documentation for details." When I then push the question mark on the touch screen the following notidication is given: " Alignment failed. Check printer quality of the current print job. If it is not satisfactory, try aligning the printer to see if that improves the quality. To align the printhead again, touch (home), touch (arrow right), touch Tools, and then touch Align Printhead." When I follow these instructions, the same thing happens. I have tried the option "Clean printheads" under "Tools". The test prints that come out are again good in black and white and not good in colour.
The ink level of the cartridges is very low for Yellow, Magenta and Cyan. For Black the printer gives a question mark. The expiry date of the cartridges is in 2015. The information on the Self Test Diagnostic Page (you get when you print a report from checking the ink cartridges) gives the following status:
Printhead status
Printhead health: Good (for both Black/Yellow and Magenta/Cyan)
Serial: 7735960 (Black/Yellow) and 7744345 (Magenta/Cyan)
End of warranty: mid-2013
Accumulated ink usage (ml): Black 99/Yellow 71, Magenta 57/Cyan 58
Refilled supply:
Detected in printhead/printer? For all cartidges "yes".
When I try to print a document from Word on my MacBook (which runs on Mac OS X 10.6.8) and the printer is on stand-by, Word recognizes the printer, starts with the print order but then comes with the notifications "Printer offline" and "Cannot find printer" and postpones the print order. Today I reset the printer and the print job that I had before the reset (which was postponed) came out.
Today, I printed a document whilst the printer was not on stand-by (the touch screen was on home menu) and the print was well (it was only black and white). After the print, the printer also made a print report. Again, the colour was bad, but black ink was good. After that print report, the printer started aligning again. After 5 minutes it gave the above-mentioned failure notice (" Failure notice. Alignment failed. Refer to device documentation for details.").
I would assume that the first thing that I should do is get new cartridges. However, since I only print black and white, can't I just buy the Black Ink and disable the other cartridges? Then, I am thinking of not buying HP cartridges (since the warranty term is already over). What cartridges do you reccomend (price-quality)? If new cartridges are installed (previous owner had same problems with full cartridges) and the problems (with print heads) are not solved, what should I do?
On a second note, I want to use the option of printing online. In other words, give a print order on my Iphone to the printer so that it starts printing at home. How do I set this up? How can I test this?
I would be very obliged with your feedback on the above.
Kind regards,
OnnoHey Onno,
I see you have several items listed about your Officejet Pro 8500a (A910 series) printer. The main issue that stands out is the print quality issue. I would advise starting here with your printer.
From your information I can see that refill or remanufacture cartridges have been used in this printer at some point. It is possible that the ink from these cartridges have damaged the internal ink system of the printer. If you have performed all the troubleshooting steps for the print quality issue you are experiencing, then the next step is going to be replacing the printheads of the unit.
Troubleshooting Print Quality Issues
The 8500a requires all cartridges be available even if you are simply printing in B&W. If the cartridges are low, then you will have to replace the cartridges as needed. Typically by the design of this printer, however, print quality issues do not follow ink levels in the cartridges as ink is piped to the internal printheads, thus even with empty cartridges there is some ink remaining in the system.
The printheads for the 8500a can be found at most HP certified retailers if you decide to attempt replacing them as a step towards resolving the issue. As to the cartridges, I would advise using genuine HP cartridges as HP ink is designed with HP printers in mind. For information about refilled/remanufactured cartridges please click here.
Hope this helps in getting the print quality issue alleviated,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee. -
Printing Problems with Acrobat Pro 9.5 for Mac
I have Acrobat pro 9.5 for Mac. I'm using a Canon MG8150 multi-function printer. Everytime I try to print from Arobat Pro I get an error message. Any suggestions? I can print my pdfs from Apple Preview; so it's not the document or the printer.
The first problem is probably a permissions issue. Run Repair Permissions from the Disk Utility. For the second see this
Announcement: Known Acrobat Issues under Snow Leopard
Hide Details
(1) The Adobe PDF Printer module does not work under OS X.6. Please see http://kb2.adobe.com/cps/509/cpsid_50981.html to find out how to create Adobe Quality PDFs under Snow Leopard.
(2) Opening files from the finder, including files authored by Adobe applications, may not open them in the original authoring application. Omitting a file extension from the file name will increase the likelihood of this happening. See http://kb2.adobe.com/cps/511/cpsid_51110.html for more information.
by MichaelKazlow at Aug 30, 2009 2:10 PM -
PDF prints from Acrobat 8 Pro, but not from Acrobat 9 Pro
I have a PDF that prints fine when I print from Acrobat 8 Pro, but when I open the same PDF in Acrobat 9 Pro, only portions of each page actually print out.
All systems running Windows XP Pro, SP3
A8P 8.1.2
A9P 9.1.1
Any ideas?Well, for those following this thread or needing a solution, I found a work-around though I'm still not sure why the initial problem exists.
In Acrobat 9 Pro, once you have the main print dialogue box open, follow the steps below:
1) Click ADVANCED
2) Select PRINT AS IMAGE
3) Set DPI to 300
4) Click OK
5) Make any other typical print setup adjustments as you normally would and finish printing as usual -
Win7 does not show "Adobe PDF" printer using Acrobat 8 Pro
using Acrobat Pro 8.1.0 I cannot see or add Adobe PDF printer. I do see "Microsoft XPS Document Writer" as a printer.
Concentrate on getting the scanner working without any Adobe software. Once you can scan to a file, any OSX program (except Adobe) that can read the file can generate PDF files via the Print command.
-
Printing preview with adobe pro or acrobat reader
When I print a document I generally use the Preview button to check what the document looks like.
Is it normal that with Adobe Pro or Reader the Preview buttons returns the following comment "preview is not supported".
MerciYes, that seems like the expected behavior - I am not exactly sure why Adobe does this, but it happens here too.
If it's important, you could ask on the Adobe site or send feedback to Apple asking why this occurs.
Message was edited by: John Blanchard1
Maybe you are looking for
-
Can PMAC be run Daily and Can we see the Batch Update Cost Daily?
Dear Gurus, My Client wants to see Daily Updated Cost each end of day Through PMAC. Is it possible to run daily and Can we also see the COGS too. Now we have a Requirement here : My Clinet During the Production Process uses : Boiler Fuel, Chlorine, E
-
Unable to clear GL due to Val difference between Local and group currency.
hi, We have an open item managed Revaluation G/L account in our company code which has a local currency USD.There are some documents posted to this account in both USD and CAD. But when we analyze the docs posted in CAD we found a valuation differenc
-
does touching the home button wakes up the iphone 5S or do we physically have to Click on Home Button or Sleep/Wake button and then use touch id? What I am trying to say is that each time I have to click on the home button to wake up the iphone 5s an
-
Wireless users facing issue range issue between two ssid
Hi It has been observed users aren't able to be connect to CORP SSID however they are able to connect the GUEST SSID at the same time. Incase user is moved more towards the AP then he is able to connect to CORP SSID. Also observed that CORP SSID is
-
Create First MVC Application In Eclipse
Hi all. i use eclipse for development sap ui5 applications. i use xml view.(What do you suggest you(js ?)). my controller.js; sap.ui.controller("ui5_example.oView", { onInit: function() { var oView = this.getView(); var oModel = new sap.ui.model.