XP after SP2 installation affects SB Live performa
I recently installed XP SP2 and have since had trouble with my SB Li've card. I've tried reloading the software, to little avail. Certain drivers or other components simply don't load.
I've uninstalled as much of the previous software as I possibly can, and removed and replaced the card.
Still no success. Please help?
Hi,
have completed what I feel is a successful cleansweep. However, when I attempt to record in Cool Edit 2000, whilst I don't receive a message to the effect that there is no Soundblaster audio device installed, the sound replayed is hissy in the extreme and colourless (tinny).
It used to work perfectly, prior to XP SP2.
I'm a professional working in audio presentation, a lot of my editing was done at home. Now I can't do it, without upgrading to a superior sound card, at considerable expense.
Similar Messages
-
Tecra 9000: After SP2 installation the Yamaha sound driver does not work
Hi,
I own a Tecra 9000, with a Yamaha AC-XG sound card.
The problem is that since I installed Windows XP with SP2 included, I lost my sound.
I know also that Toshiba is aware of this situation and they have managed to post a solution for it. I've tried this solution:
Detail:
The Yamaha AC-XG driver uses PortCls function for checking the operatingsystem version. XP Service Pack 1, PortCls function is changed, then the Yamaha driver cannot get operatingsystem version correctly. The operatingsystem provides the version for Windows 95. Therefore the Operatingsystem has a blue screen. Therefore Microsoft added the workaround and illegal drivers are blocked from working on SP1. This issue also happens Windows XP SP2.
Yamaha already provides the fixed drvier to Toshiba. The fixed driver version is the following;
yacxg.sys 6.13.10.2152 with software synthesizer
yacxgc.sys 6.13.10.3152 without software synthesizer
How to fix this issue:
Install the fixed driver on a system before/after installing Windows XP Service Pack 2.
Install steps:
(1) Unzip an attached file on your hard disk.
(2) Run SETUP.EXE
(3) Click the Next button.
(4) Choose "Yes, I want to restart my computer now" and click Finish.
A toshiba engineer told me that first of all I needed to install the old driver "5.12.01.3141", and it worked out ok, but still no sound.
And then he told me to install the version "6.13.10.2152", but this went wrong. I've got the error message "Driver was not installed".
I already tried lots of different drivers, including generic and yamaha drivers.
Please tell me a good solution for this issue if possible.
Thank you very much,
HugoHi Hugo
It seems today is your lucky day ;)
Thanks to Toshiba because the Toshiba computer knowledge base is a really useful area and I have found many useful document and solutions!!!
I found also a solution for your tiny issue ;)
As you said the problem is the Microsoft service pack 2. The sound driver makes some troubles after the installation of SP1 or SP2 and therefore the update is necessary!!!
Please take a look here:
Windows XP Service Pack 1a or Service Pack 2 incompatible with existing Yamaha sound driver
http://ftp.toshiba.ca/support/techsupport/tsbs/all/-TSB000805.htm
Good luck -
Issue in Infoview Schedulers after SP2 installation
Hi All,
After the installation of SP2 on XIR3 (12.1.0.882.BOE_Mira_RTM), I am facing issue while scheduling webi reports from infoview.
Under the u201CFormats and Destinationsu201D option, by default u201CWeb Intellegenceu201D is selected in output format, when I am trying to select any other option (Microsoft Excel, Adobe Acrobat, CSV) infoview page is refreshing and showing u201CPage cannot be displayedu201D HTTP 400 u2013 Bad Request and also showing u201CDONEu201D in status bar with Error sign in IE.
Line: 129
Char: 3
Error Code: Access is denied
Code 0
URL http://<Servername>///PlatefornServices/Scheduler.aspx?cafWebSesInit=true&appkind=InfoView&service=/InfoviewApp/Common/appService.aspx&loc=en&pvl=en-US&ctx=Standalone&actld=548&objIds=8246&containerId=2205pref=max0pageUt%..............
Schedulers are working fine using CMC.
Could you please help me on this?
Thanks,
Amit
Edited by: amitgoyal on Oct 14, 2009 12:35 PMUnresolvable as it is in Infoview and not external.
-
Can not run Power saver on my Satellite after SP2 installation
I cannot Install or run toshiba power saver on my Satellite A60. I updated to SP2 on the windows update page and cannot run power saver. I have tried re-installing the software but that still won't work. Any ideas PLEASE!!!
Cheers
themalguyHi after installing the power utillites for A60 the instll ran through OK but when i tried selecting the power options in the control panel i get a access denied. Now everytime i boot i get a error:
Toshiba Power Save
A fatal error has occurred. This programme will be terminated.
Code: Ox7E
i quite suprised as this seems to be a Toshiba problem as they obviously aent supplied correct driver s for this platform.
Can any one help!!!!!!!!!!!!! -
If we missed the live performances from SXSW, will we still be able to watch the performances after the artists have performed?
Yes, the app has a feature to playback the concert. I missed London Grammar and Imagine Dragons, but watched Coldplay. They were really excellent. Do love Apple for bringing this to us.
-
After compressed the database table affect the system performance
There is a very big database table in my system called MSEG. It is about 910G and the wasted tablespace is about 330G. I want to compress the table, but the table is written and deleted frequently. will it affect the system performance if I compress the table. Or I can only select reorganize the dababase table avoid it affect the system performance? Thanks.
Hi Huiyong,
If you talk about table compression, it cannot be done online. we need to do this with a planned downtime. Table compression has some percentage of overhead on CPU. Refer SAP note for
1289494
FAQ: Oracle compression
1436352
Oracle Database 11g Advanced Compression for SAP Systems
If you talk about online table reorg, yes definitely there would be impact on user performance.
As the table size is very big it may take some days or hours to perform online Reorg.
Other faster method is to perform table export import which is faster than online reorg. But it will again require downtime .
Hope this helps.
Regards,
Deepak Kori -
Mac slow down after Mavericks installation
I have realized that I am not the first with the same problem after the installation of Mavericks.
I run etrecheck as have been already advised many users.
Below are the results.
Can you please help me further? My mac is really slow. Applications, like email quit unexpectadly.
Thank you in advance.
Hardware Information:
MacBook Pro (13-inch, Early 2011)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9.1 (13B42) - Uptime: 1 day 1:57:8
Disk Information:
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 319.21 GB (34.86 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Seagate Backup+ RD 1 TB
Gavrilos' III back up (disk1s1) /Volumes/Gavrilos' III back up: 500.24 GB (237.88 GB free)
Other files (disk1s2) /Volumes/Other files: 499.97 GB (159.86 GB free)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Lexmark International Lexmark E340
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.67)
com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4)
com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5)
Problem System Launch Daemons:
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[invalid] com.bjango.istatmenusdaemon.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.macpaw.CleanMyMac2.Agent.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.Helper-Tool.plist
[not loaded] com.teamviewer.teamviewer_service.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.CS5ServiceManager.plist
[loaded] com.bjango.istatmenusagent.plist
[loaded] com.divx.dms.agent.plist
[loaded] com.divx.update.agent.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.oracle.java.Java-Updater.plist
[not loaded] com.teamviewer.teamviewer.plist
[not loaded] com.teamviewer.teamviewer_desktop.plist
[loaded] de.novamedia.VodafoneDeviceObserver.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.adobe.ARM.[...].plist
[failed] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
[failed] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
[failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
[loaded] com.spotify.webhelper.plist
[loaded] com.yourcompany.HSPA_USB_MODEM.plist
User Login Items:
Citations
AppTrap
Mail
Skype
iTunesHelper
Dropbox
Safari
AdobeResourceSynchronizer
Calendar
KiesViaWiFiAgent
fuspredownloader
3rd Party Preference Panes:
AppTrap
Flash Player
Java
MacFUSE
Paragon NTFS for Mac ® OS X
Internet Plug-ins::
o1dbrowserplugin: Version: 4.9.1.16010
OVSHelper: Version: 1.1
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.8.1
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
DivX Web Player: Version: 3.0.1.5 - SDK 10.5
Silverlight: Version: 5.1.10411.0 - SDK 10.6
Flash Player: Version: 11.9.900.170 - SDK 10.6
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 4.9.1.16010
NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6
AdobePDFViewer: Version: 11.0.04 - SDK 10.6
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
JavaAppletPlugin: Version: Java 7 Update 45
User Internet Plug-ins::
Picasa: Version: 1.0 - SDK 10.4
Google Earth Web Plug-in: Version: 7.1
Bad Fonts:
None
Old applications:
None
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 264.82 GB
Destinations:
Gavrilos' III back up [Local] (Last used)
Total size: 465.88 GB
Total number of backups: 7
Oldest backup: 2013-12-03 22:42:27 +0000
Last backup: 2013-12-17 06:16:17 +0000
Size of backup disk: Too small
Backup size 465.88 GB < (Disk used 264.82 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
10% PluginProcess
5% coreaudiod
4% Mail
4% WindowServer
3% Safari
Top Processes by Memory:
140 MB Safari
108 MB Mail
82 MB Finder
72 MB com.apple.WebKit.WebContent
53 MB Skype
Virtual Memory Statistics:
27 MB Free RAM
936 MB Active RAM
915 MB Inactive RAM
1.01 GB Wired RAM
6.01 GB Page-ins
517 MB Page-outsYou have been up for ~17 days, and you have 1.72GB of pageouts. That averages out to one page every 3 seconds, and we will assume you re not working 24/7, so when you are using your Mac you are spending a lot of time paging to disk. Disks are slow.
As Kappy says, you are either concurrently running too may RAM hungry apps, or you have some apps that really want lots of RAM and you are running them a lot day after day. Either "Stop That!", or get more RAM.
You could also consider a Solid State Disk, but that is not as good as having real RAM and would be more expensive than RAM unless you Mac is max'ed out on RAM. Of course you could do both. More RAM and an SSD
If you want to see the paging for yourself, start an Applications -> Utilities -> Terminal session, and run the command:
sar -g 60 100
which will report the pageout stats every minute for 100 minutes (adjust the numbers to suit your tastes).
Now use your Mac as your normally would, including the times when it is running slow. After you have experienced the slowness, go back and look at the 'sar' output. If you have mostly zeros with maybe a trivial blip every once in awhile, that is noise and not a paging issue. If you have some high numbers, then you are paging heavily at that time. If you have sustained paging, even if small value, it is going to affect your performance. High numbers will affect your performance even more. -
Database is not starting after RAC installation
Hi All,
I have installed 10g R2 2-node RAC on RHEL4 without any problem. But after the installation the database is not starting and i'm not able to connect. It is showing the below error..
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Can anybody help what might be the problem?
Thanks,
PraveenHi,
I'm giving the contents of alter log file from the first node...
Mon Feb 19 16:45:59 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =36
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
sga_target = 1073741824
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database_instances= 1
db_create_file_dest = +ORCL_DATA1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 16:46:00 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=31282
DIAG started with pid=3, OS id=31284
PSP0 started with pid=4, OS id=31286
LMON started with pid=5, OS id=31300
LMD0 started with pid=6, OS id=31315
MMAN started with pid=7, OS id=31317
DBW0 started with pid=8, OS id=31319
LGWR started with pid=9, OS id=31321
CKPT started with pid=10, OS id=31323
SMON started with pid=11, OS id=31325
RECO started with pid=12, OS id=31327
CJQ0 started with pid=13, OS id=31329
MMON started with pid=14, OS id=31331
Mon Feb 19 16:46:00 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=15, OS id=31333
Mon Feb 19 16:46:00 2007
starting up 1 shared server(s) ...
Mon Feb 19 16:46:00 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 16:46:01 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Resources and enqueues cleaned out
Resources remastered 0
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Reconfiguration complete
Mon Feb 19 16:46:01 2007
CREATE DATABASE "bsaprod"
MAXINSTANCES 32
MAXLOGHISTORY 1
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
CHARACTER SET WE8ISO8859P1
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K
USER SYS IDENTIFIED BY *USER SYSTEM IDENTIFIED BY
Mon Feb 19 16:46:01 2007
Starting background process ASMB
ASMB started with pid=19, OS id=31365
Starting background process RBAL
RBAL started with pid=20, OS id=31369
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 16:46:05 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 16:46:06 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 16:46:06 2007
Database mounted in Exclusive Mode
Mon Feb 19 16:46:09 2007
Successful mount of redo thread 1, with mount id 3309011657
Assigning activation ID 3309011657 (0xc53b82c9)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 16:46:09 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 16:46:09 2007
SMON: enabling cache recovery
Mon Feb 19 16:46:09 2007
create tablespace SYSTEM datafile SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL online
Mon Feb 19 16:46:20 2007
Completed: create tablespace SYSTEM datafile SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL online
Mon Feb 19 16:46:20 2007
create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Completed: create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Mon Feb 19 16:46:24 2007
CREATE SMALLFILE UNDO TABLESPACE UNDOTBS1 DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:31 2007
Successfully onlined Undo Tablespace 1.
Completed: CREATE SMALLFILE UNDO TABLESPACE UNDOTBS1 DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:31 2007
create tablespace SYSAUX datafile SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
Completed: create tablespace SYSAUX datafile SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
Mon Feb 19 16:46:36 2007
CREATE SMALLFILE TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
Completed: CREATE SMALLFILE TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
Mon Feb 19 16:46:36 2007
ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP
Completed: ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP
Mon Feb 19 16:46:36 2007
ALTER DATABASE DEFAULT TABLESPACE SYSTEM
Completed: ALTER DATABASE DEFAULT TABLESPACE SYSTEM
Mon Feb 19 16:46:38 2007
SMON: enabling tx recovery
Mon Feb 19 16:46:39 2007
Threshold validation cannot be done before catproc is loaded.
Threshold validation cannot be done before catproc is loaded.
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=22, OS id=32303
Mon Feb 19 16:46:39 2007
Completed: CREATE DATABASE "bsaprod"
MAXINSTANCES 32
MAXLOGHISTORY 1
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
CHARACTER SET WE8ISO8859P1
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K
USER SYS IDENTIFIED BY *USER SYSTEM IDENTIFIED BY
Mon Feb 19 16:46:39 2007
CREATE SMALLFILE UNDO TABLESPACE "UNDOTBS2" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Completed: CREATE SMALLFILE UNDO TABLESPACE "UNDOTBS2" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:46 2007
CREATE SMALLFILE TABLESPACE "USERS" LOGGING DATAFILE SIZE 5M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO
Completed: CREATE SMALLFILE TABLESPACE "USERS" LOGGING DATAFILE SIZE 5M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO
Mon Feb 19 16:46:46 2007
ALTER DATABASE DEFAULT TABLESPACE "USERS"
Completed: ALTER DATABASE DEFAULT TABLESPACE "USERS"
Mon Feb 19 16:47:05 2007
Thread 1 advanced to log sequence 2
Current log# 2 seq# 2 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:47:34 2007
Thread 1 cannot allocate new log, sequence 3
Checkpoint not complete
Current log# 2 seq# 2 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 3
Current log# 1 seq# 3 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:48:10 2007
Thread 1 cannot allocate new log, sequence 4
Checkpoint not complete
Current log# 1 seq# 3 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 4
Current log# 2 seq# 4 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:49:05 2007
Thread 1 cannot allocate new log, sequence 5
Checkpoint not complete
Current log# 2 seq# 4 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 5
Current log# 1 seq# 5 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:50:19 2007
Thread 1 cannot allocate new log, sequence 6
Checkpoint not complete
Current log# 1 seq# 5 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 6
Current log# 2 seq# 6 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:51:00 2007
Thread 1 cannot allocate new log, sequence 7
Checkpoint not complete
Current log# 2 seq# 6 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 7
Current log# 1 seq# 7 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:51:54 2007
Thread 1 cannot allocate new log, sequence 8
Checkpoint not complete
Current log# 1 seq# 7 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 8
Current log# 2 seq# 8 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:55:32 2007
Thread 1 cannot allocate new log, sequence 9
Checkpoint not complete
Current log# 2 seq# 8 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 9
Current log# 1 seq# 9 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:56:35 2007
Thread 1 cannot allocate new log, sequence 10
Checkpoint not complete
Current log# 1 seq# 9 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 10
Current log# 2 seq# 10 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:56:52 2007
Thread 1 cannot allocate new log, sequence 11
Checkpoint not complete
Current log# 2 seq# 10 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 11
Current log# 1 seq# 11 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:57:04 2007
Thread 1 cannot allocate new log, sequence 12
Checkpoint not complete
Current log# 1 seq# 11 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 12
Current log# 2 seq# 12 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:57:14 2007
Thread 1 cannot allocate new log, sequence 13
Checkpoint not complete
Current log# 2 seq# 12 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 13
Current log# 1 seq# 13 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:57:31 2007
Thread 1 cannot allocate new log, sequence 14
Checkpoint not complete
Current log# 1 seq# 13 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 14
Current log# 2 seq# 14 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:58:13 2007
Thread 1 cannot allocate new log, sequence 15
Checkpoint not complete
Current log# 2 seq# 14 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 15
Current log# 1 seq# 15 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:59:42 2007
Thread 1 cannot allocate new log, sequence 16
Checkpoint not complete
Current log# 1 seq# 15 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 16
Current log# 2 seq# 16 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:00:33 2007
Thread 1 cannot allocate new log, sequence 17
Checkpoint not complete
Current log# 2 seq# 16 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 17
Current log# 1 seq# 17 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:01:49 2007
Thread 1 cannot allocate new log, sequence 18
Checkpoint not complete
Current log# 1 seq# 17 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 18
Current log# 2 seq# 18 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:02:23 2007
Thread 1 cannot allocate new log, sequence 19
Checkpoint not complete
Current log# 2 seq# 18 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 19
Current log# 1 seq# 19 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:04:06 2007
Thread 1 cannot allocate new log, sequence 20
Checkpoint not complete
Current log# 1 seq# 19 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 20
Current log# 2 seq# 20 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:05:22 2007
Thread 1 cannot allocate new log, sequence 21
Checkpoint not complete
Current log# 2 seq# 20 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 21
Current log# 1 seq# 21 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:06:22 2007
Thread 1 cannot allocate new log, sequence 22
Checkpoint not complete
Current log# 1 seq# 21 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 22
Current log# 2 seq# 22 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:08:42 2007
Thread 1 cannot allocate new log, sequence 23
Checkpoint not complete
Current log# 2 seq# 22 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 23
Current log# 1 seq# 23 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:09:43 2007
Thread 1 cannot allocate new log, sequence 24
Checkpoint not complete
Current log# 1 seq# 23 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 24
Current log# 2 seq# 24 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:10:42 2007
Thread 1 cannot allocate new log, sequence 25
Checkpoint not complete
Current log# 2 seq# 24 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 25
Current log# 1 seq# 25 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:11:31 2007
Thread 1 cannot allocate new log, sequence 26
Checkpoint not complete
Current log# 1 seq# 25 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 26
Current log# 2 seq# 26 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:12:01 2007
Thread 1 cannot allocate new log, sequence 27
Checkpoint not complete
Current log# 2 seq# 26 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 27
Current log# 1 seq# 27 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:13:12 2007
Thread 1 cannot allocate new log, sequence 28
Checkpoint not complete
Current log# 1 seq# 27 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 28
Current log# 2 seq# 28 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:14:05 2007
Thread 1 cannot allocate new log, sequence 29
Checkpoint not complete
Current log# 2 seq# 28 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 29
Current log# 1 seq# 29 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:14:57 2007
Thread 1 cannot allocate new log, sequence 30
Checkpoint not complete
Current log# 1 seq# 29 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 30
Current log# 2 seq# 30 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:16:29 2007
Thread 1 cannot allocate new log, sequence 31
Checkpoint not complete
Current log# 2 seq# 30 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:17:54 2007
Starting background process EMN0
EMN0 started with pid=25, OS id=15651
Mon Feb 19 17:17:54 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:17:55 2007
Stopping background process QMNC
Mon Feb 19 17:17:55 2007
Stopping background process CJQ0
Mon Feb 19 17:17:57 2007
Stopping background process MMNL
Mon Feb 19 17:17:58 2007
Stopping background process MMON
Mon Feb 19 17:17:59 2007
Shutting down instance (immediate)
License high water mark = 1
Mon Feb 19 17:17:59 2007
Stopping Job queue slave processes
Mon Feb 19 17:17:59 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:18:01 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:01 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:18:03 2007
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:18:04 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:04 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:18:04 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:18:04 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:18:09 2007
freeing rdom 0
Mon Feb 19 17:18:12 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =36
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database_instances= 1
db_create_file_dest = +ORCL_DATA1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:18:13 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=16124
DIAG started with pid=3, OS id=16126
PSP0 started with pid=4, OS id=16128
LMON started with pid=5, OS id=16130
LMD0 started with pid=6, OS id=16132
MMAN started with pid=7, OS id=16134
DBW0 started with pid=8, OS id=16136
LGWR started with pid=9, OS id=16138
CKPT started with pid=10, OS id=16140
SMON started with pid=11, OS id=16142
RECO started with pid=12, OS id=16144
CJQ0 started with pid=13, OS id=16146
MMON started with pid=14, OS id=16148
Mon Feb 19 17:18:13 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=15, OS id=16150
Mon Feb 19 17:18:13 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:18:13 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:18:14 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Resources and enqueues cleaned out
Resources remastered 0
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Reconfiguration complete
Mon Feb 19 17:18:14 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:18:14 2007
Starting background process ASMB
ASMB started with pid=19, OS id=16182
Starting background process RBAL
RBAL started with pid=20, OS id=16186
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:18:18 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:18:23 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:18:23 2007
Successful mount of redo thread 1, with mount id 3309012054
Mon Feb 19 17:18:23 2007
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:18:23 2007
alter database archivelog
Completed: alter database archivelog
Mon Feb 19 17:18:23 2007
alter database open
Mon Feb 19 17:18:23 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=22, OS id=16393
Mon Feb 19 17:18:23 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=23, OS id=16395
Mon Feb 19 17:18:23 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:18:23 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:18:23 2007
SMON: enabling cache recovery
Mon Feb 19 17:18:23 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:18:23 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:18:23 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=24, OS id=16422
Mon Feb 19 17:18:23 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:18:23 2007
SMON: enabling tx recovery
Mon Feb 19 17:18:23 2007
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=25, OS id=16449
Mon Feb 19 17:18:25 2007
Completed: alter database open
Mon Feb 19 17:18:25 2007
ALTER DATABASE ADD LOGFILE THREAD 2 GROUP 3 SIZE 51200K,
GROUP 4 SIZE 51200K
Completed: ALTER DATABASE ADD LOGFILE THREAD 2 GROUP 3 SIZE 51200K,
GROUP 4 SIZE 51200K
Mon Feb 19 17:18:28 2007
ALTER DATABASE ENABLE PUBLIC THREAD 2
Completed: ALTER DATABASE ENABLE PUBLIC THREAD 2
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:18:29 2007
Starting background process EMN0
EMN0 started with pid=26, OS id=16564
Mon Feb 19 17:18:29 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:18:29 2007
Stopping background process QMNC
Mon Feb 19 17:18:29 2007
Stopping background process CJQ0
Mon Feb 19 17:18:30 2007
Stopping background process MMNL
Mon Feb 19 17:18:31 2007
Stopping background process MMON
Mon Feb 19 17:18:32 2007
Shutting down instance (immediate)
License high water mark = 3
Mon Feb 19 17:18:32 2007
Stopping Job queue slave processes
Mon Feb 19 17:18:32 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:18:34 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:34 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:18:34 2007
Shutting down archive processes
Archiving is disabled
Mon Feb 19 17:18:39 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:18:44 2007
ARCH shutting down
ARC1: Archival stopped
Mon Feb 19 17:18:49 2007
ARCH shutting down
ARC0: Archival stopped
Mon Feb 19 17:18:50 2007
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:18:51 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:51 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:18:51 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:18:51 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:18:56 2007
freeing rdom 0
Mon Feb 19 17:18:59 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
spfile = +BSA_DATA1/bsaprod/spfilebsaprod.ora
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
db_create_file_dest = +ORCL_DATA1
thread = 1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:19:00 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=17373
DIAG started with pid=3, OS id=17375
PSP0 started with pid=4, OS id=17377
LMON started with pid=5, OS id=17379
LMD0 started with pid=6, OS id=17381
LMS0 started with pid=7, OS id=17383
LMS1 started with pid=8, OS id=17387
MMAN started with pid=9, OS id=17391
DBW0 started with pid=10, OS id=17393
LGWR started with pid=11, OS id=17395
CKPT started with pid=12, OS id=17397
SMON started with pid=13, OS id=17399
RECO started with pid=14, OS id=17412
CJQ0 started with pid=15, OS id=17428
MMON started with pid=16, OS id=17430
Mon Feb 19 17:19:00 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=17, OS id=17432
Mon Feb 19 17:19:00 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:19:01 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:19:01 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Mon Feb 19 17:19:01 2007
LMS 1: 0 GCS shadows cancelled, 0 closed
Mon Feb 19 17:19:01 2007
LMS 0: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Mon Feb 19 17:19:01 2007
LMS 1: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:19:01 2007
LMS 0: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:19:01 2007
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=20, OS id=17460
Mon Feb 19 17:19:02 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:19:02 2007
This instance was first to mount
Mon Feb 19 17:19:02 2007
Starting background process ASMB
ASMB started with pid=22, OS id=17466
Starting background process RBAL
RBAL started with pid=23, OS id=17470
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:19:06 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:19:09 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:19:10 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:19:10 2007
Successful mount of redo thread 1, with mount id 3308997510
Mon Feb 19 17:19:10 2007
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:19:11 2007
ALTER DATABASE OPEN
This instance was first to open
Picked broadcast on commit scheme to generate SCNs
Mon Feb 19 17:19:11 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=26, OS id=17679
Mon Feb 19 17:19:11 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=27, OS id=17706
Mon Feb 19 17:19:11 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:19:11 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:19:11 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:19:11 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:19:11 2007
SMON: enabling cache recovery
Mon Feb 19 17:19:11 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=28, OS id=17708
Mon Feb 19 17:19:11 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:19:11 2007
SMON: enabling tx recovery
Mon Feb 19 17:19:11 2007
Database Characterset is WE8ISO8859P1
Mon Feb 19 17:19:11 2007
Instance recovery: looking for dead threads
Instance recovery: lock domain invalid but no dead threads
Mon Feb 19 17:19:12 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:19:12 2007
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=29, OS id=17735
Mon Feb 19 17:19:13 2007
Completed: ALTER DATABASE OPEN
Mon Feb 19 17:20:11 2007
Shutting down archive processes
Mon Feb 19 17:20:16 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:23:35 2007
Starting background process EMN0
EMN0 started with pid=74, OS id=28350
Mon Feb 19 17:23:35 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:23:36 2007
Stopping background process QMNC
Mon Feb 19 17:23:36 2007
Stopping background process CJQ0
Mon Feb 19 17:23:38 2007
Stopping background process MMNL
Mon Feb 19 17:23:39 2007
Stopping background process MMON
Mon Feb 19 17:23:40 2007
Shutting down instance (immediate)
License high water mark = 34
Mon Feb 19 17:23:40 2007
Stopping Job queue slave processes
Mon Feb 19 17:23:40 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:24:07 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:24:07 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:24:08 2007
Shutting down archive processes
Archiving is disabled
Mon Feb 19 17:24:18 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC1: Archiving disabled
ARCH shutting down
Mon Feb 19 17:24:18 2007
ARC1: Archival stopped
Mon Feb 19 17:24:18 2007
ARC0: Becoming the heartbeat ARCH
Mon Feb 19 17:24:18 2007
ARC0: Archiving disabled
ARCH shutting down
ARC0: Archival stopped
Mon Feb 19 17:24:19 2007
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:24:19 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:24:19 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:24:19 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:24:19 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:24:25 2007
freeing rdom 0
Mon Feb 19 17:24:35 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
__shared_pool_size = 255852544
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = +BSA_DATA1/bsaprod/spfilebsaprod.ora
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
__db_cache_size = 801112064
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
db_create_file_dest = +ORCL_DATA1
thread = 1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:24:35 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=29950
DIAG started with pid=3, OS id=29952
PSP0 started with pid=4, OS id=29954
LMON started with pid=5, OS id=29956
LMD0 started with pid=6, OS id=29958
LMS0 started with pid=7, OS id=29960
LMS1 started with pid=8, OS id=29964
MMAN started with pid=9, OS id=29968
DBW0 started with pid=10, OS id=29970
LGWR started with pid=11, OS id=29972
CKPT started with pid=12, OS id=29974
SMON started with pid=13, OS id=29976
RECO started with pid=14, OS id=29978
CJQ0 started with pid=15, OS id=29980
MMON started with pid=16, OS id=29982
Mon Feb 19 17:24:36 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=17, OS id=29984
Mon Feb 19 17:24:36 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:24:36 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:24:39 2007
Reconfiguration started (old inc 0, new inc 4)
List of nodes:
0 1
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
* domain 0 not valid according to instance 1
* domain 0 valid = 0 according to instance 1
Mon Feb 19 17:24:39 2007
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Mon Feb 19 17:24:39 2007
LMS 1: 0 GCS shadows cancelled, 0 closed
Mon Feb 19 17:24:39 2007
LMS 0: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Mon Feb 19 17:24:39 2007
LMS 0: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:24:39 2007
LMS 1: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:24:39 2007
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=20, OS id=30069
Mon Feb 19 17:24:40 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:24:41 2007
Starting background process ASMB
ASMB started with pid=22, OS id=30121
Starting background process RBAL
RBAL started with pid=23, OS id=30125
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:24:45 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:24:49 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:24:49 2007
Successful mount of redo thread 1, with mount id 3309017062
Mon Feb 19 17:24:49 2007
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Mon Feb 19 17:24:51 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:24:52 2007
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:24:52 2007
ALTER DATABASE OPEN
Picked broadcast on commit scheme to generate SCNs
Mon Feb 19 17:24:52 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=25, OS id=30406
Mon Feb 19 17:24:53 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=26, OS id=30422
Mon Feb 19 17:24:53 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:24:53 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:24:53 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:24:53 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:24:53 2007
SMON: enabling cache recovery
Mon Feb 19 17:24:53 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=27, OS id=30436
Mon Feb 19 17:25:07 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:25:07 2007
SMON: enabling tx recovery
Mon Feb 19 17:25:07 2007
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=29, OS id=30882
Mon Feb 19 17:26:31 2007
Completed: ALTER DATABASE OPEN
Mon Feb 19 17:26:38 2007
ALTER SYSTEM SET service_names='bsaprod','bsatest' SCOPE=MEMORY SID='bsaprod1';
Mon Feb 19 17:26:53 2007
Shutting down archive processes
Mon Feb 19 17:26:58 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:32:16 2007
Error: KGXGN aborts the instance (6)
Mon Feb 19 17:32:16 2007
Errors in file /u01/app/oracle/oracle/admin/bsaprod/bdump/bsaprod1_lmon_29956.trc:
ORA-29702: error occurred in Cluster Group Service operation
LMON: terminating instance due to error 29702
Mon Feb 19 17:32:17 2007
System state dump is made for local instance
System State dumped to trace file /u01/app/oracle/oracle/admin/bsaprod/bdump/bsaprod1_diag_29952.trc
Mon Feb 19 17:32:18 2007
Trace dumping is performing id=[cdmp_20070219173217]
Mon Feb 19 17:32:21 2007
Instance terminated by LMON, pid = 29956
and also the output of crs_stat -t in first node is....
Name Type Target State Host
ora....d1.inst application ONLINE OFFLINE
ora....d2.inst application ONLINE OFFLINE
ora....od1.srv application ONLINE OFFLINE
ora....od2.srv application ONLINE OFFLINE
ora....test.cs application ONLINE OFFLINE
ora.bsaprod.db application ONLINE OFFLINE
ora....SM1.asm application ONLINE UNKNOWN dsrvbd003
ora....ER.lsnr application ONLINE UNKNOWN dsrvbd003
ora....03.lsnr application ONLINE UNKNOWN dsrvbd003
ora....003.gsd application ONLINE UNKNOWN dsrvbd003
ora....003.ons application ONLINE UNKNOWN dsrvbd003
ora....003.vip application ONLINE ONLINE dsrvbd003
ora....SM2.asm application ONLINE OFFLINE
ora....04.lsnr application ONLINE OFFLINE
ora....004.gsd application ONLINE OFFLINE
ora....004.ons application ONLINE OFFLINE
ora....004.vip application ONLINE OFFLINE -
Who kills your iPod after the installation of iPod updater?
Hello all,
First, sorry for my poor English. I am not a professional nor a technician and I could be wrong, so please correct me. There are many problems reported mainly from the PC users that their iPod can't be recognized nor mounted after the installation of the latest iPod updater. Most of them claimed that the iPod updater kills their beloved iPods. Before we jump to a conclusion, we must understand what is iPod, and how does the iPod update work.
I believe that iPod equals a basic computer and need a OS in order to communicate with the PC. Installation the Updater will format the Hard disk of the iPod and then install the simple OS, so if we open the iPod updater file, it will show a window with two buttons i.e. Restore and Update, an Update is to copy the latest OS over the old version, but the Restore will format the hard disk before it install the OS over it. And importantly, during this process, the iPod needs sufficient of power to complete the upgrade, however, the problem comes just after the format, and the PC's USB (only 2 will work not 1.1) does not supply the stable power,even some cases that iPod does not get charge in the half way of installatin (a proper installation, you will see a running bar showing on the iPod screen just after the format), so you can imagine a hard disk got format but only got an uncompleted OS, of course, the iPod would not get recognized and mounted, and do not manage to communicate with the computer. At this stage the iPod will show a Sad iPod icon, a folder with exclamaiton points or a battery charging icon.
So, what would you do when it reach at this stage, a Reset would not work, and you would not able to do the Restore as the iPod is totally unrecognized by the computer.
Therefore, is there anyway to solve this problem, in my opinion and from my past experience, the answer is "yes", the simple way is to put your iPod in Disk Mode, when it plug to the computer, it will show as an external Hard Disk, you must fix it by doing a format (RESTORE would not work at this stage as it still can't recognized and mounted), in Mac we can use "Disk Utility" but the XP would not allow you to do the format in FAT32. After the formatting, replug the iPod with the computer, then it can be mounted and allow you to do the RESTORE.
In addition, I find an interesting point is, if your iPod formatted with a Mac, you will have better chance to be mounted with a PC, even your iPod does not complete the process of the installation of the iPod updater, and a PC formatted iPod will be likely to be fixed by a Mac as well.
How should we do before the update of the lastest software, for the XP user please do the following:-
1. Go to the system restore and create a check point in order to revert back to the previous version of the iPod updater, or do the back up using the 3rd party software such as Ghost or Go Back.
2. To have a test and make sure the PC's USB works properly. You can use the iPod or a PDA, and just make sure it got charged.
3. Have your iPod a full charge before the installation of the iPod updater
So, who is the main killer for the iPod?
For further infomation please read the following link - which wrote by a groups of great people - thank you guys
http://discussions.info.apple.com/webx?128@@.68ae8668Hello Shanker Ghimire,
Please try run the following command:" devenv /resetuserdata " to have a test, it will clear all your settings.
By the way, have you ever got any error when install that Visual Studio SDK?
In case there are some unknown errors, I'd like to ask you for some logs. Please use
http://aka.ms/vscollect
to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://skydrive.live.com/
and share the link here.
Best regards
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I listen to a lot of live performances (house sets that are from 1 hour to 3 hours long) when I start to listen to a set and then stop to do something else on the iPhone when I go back to start to listen to the track it has started from the beginning.
It sounds like either your hard drive or the SATA cable that connects it to the motherboard are failing. This could be heat related in your case, which is why you see it after it runs awhile. You can take it to the Genius Bar for a free evaluation. If you decide to test it yourself, I usually suggest moving the hard drive to an external enclosure. If it works there for awhile, the cable is probably the issue.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1397647657&sr=8-3&keywords=2.5+enclosure
http://www.ifixit.com/Device/MacBook_Pro_13%22_Unibody_Mid_2009 -
Problems running avctl after successfull installation of audit vault
Hi all,
after successful installation of audit vault, I am able to connect to the instance AV with sqlplus and with the dabase console.
But starting the avctl or questioning the status of the avctl with "avctl show_av_status", I always receive the following error:
C:\oracle\product\10.2.2\av_1\jdk\bin>avctl start_av
Exception in thread "main" java.lang.Exception: Invalid Oracle JDBC url
at oracle.av.avca.CommandArguments.setOracleProperties(CommandArguments.java:281)
at oracle.av.avca.CommandArguments.processArguments(CommandArguments.java:667)
at oracle.av.avca.Avctl.startCTL(Avctl.java:70)
at oracle.av.avca.Avctl.main(Avctl.java:318)
OS: Windows XP Prof 5.1 SP2
Audit Vault DB-Version: 10.2.0.3
Had anybody faced this problem before?
Thanks a lot in advance for your answers
StefanI had the same error, On the OUI log there was an error on the instalation of the Database Vault (although the installation finished OK), check if you have the same error output:
<LOG>
MANAGE_INSTANCE start RDBMS result=C:\oracle\product\10.2.2\av_1\bin\dvca_start_rdbms.bat,1,
Executing task SQLPLUS_CATMAC
connect SYS:java.sql.SQLException: ORA-01031: insufficient privileges
Executing task UNLOCK_DVSYS
Error executing task UNLOCK_DVSYS:java.lang.NullPointerException
Executing task LOAD_NLS_FILES
Error executing task LOAD_NLS_FILES:java.lang.NullPointerException
Executing task ACCOUNT_CREATE_OWNER
Error executing task ACCOUNT_CREATE_OWNER:java.lang.NullPointerException
Executing task GRANT_CONNECT_OWNER
Error executing task GRANT_CONNECT_OWNER:java.lang.NullPointerException
Executing task GRANT_ADMIN_DB_TRIG
Error executing task GRANT_ADMIN_DB_TRIG:java.lang.NullPointerException
Executing task GRANT_ALTER_ANY_TRIG
Error executing task GRANT_ALTER_ANY_TRIG:java.lang.NullPointerException
Executing task ACCOUNT_CREATE_MANAGER
Error executing task ACCOUNT_CREATE_MANAGER:java.lang.NullPointerException
Executing task GRANT_CONNECT_MANAGER
Error executing task GRANT_CONNECT_MANAGER:java.lang.NullPointerException
Executing task PASSWORD_CHANGE_DVSYS
Error executing task PASSWORD_CHANGE_DVSYS:java.lang.NullPointerException
Executing task PASSWORD_CHANGE_DVF
Error executing task PASSWORD_CHANGE_DVF:java.lang.NullPointerException
Unable to login to SYS account.. java.sql.SQLException: ORA-01031: insufficient privileges
. Error during post-installation processing. java.lang.NullPointerException. Error during post-installation processing. java.lang.NullPointerException.
</LOG>
Looks like the problem was that I changed sys and system password on the dbca final windows, that maybe wronged the instalation scripts.
When re-installed the AV Server I just press ok on that window without changing any password and it worked.
Hope that Helps.
Alfonso Leon -
Is ldconfig (or anything similar) required after the installation of shared library?
After a shared library (.dylib) is compiled and is put into an appropriate directory, is "ldconfig" or a similar command required to finalize the installation?
On Linux, each time a shared library (.so) is installed or uninstalled, /etc/ld.so.cache must be updated by running the "ldconfig" command. Does Mac OS X require "ldconfig" or a similar command after the installation or uninstallation of a shared library (.dylib)?
Note that a shared library may also be called a shared object (so), a dynamically linked library, or a dynamic-link library (dll).
Thanks.The following excerpt explains why Linux uses "ldconfig" after the installation or uninstallation of a shared library.
http://tldp.org/HOWTO/Program-Library-HOWTO/shared-libraries.html
| On Linux systems, this loader ... finds
| and loads all other shared libraries
| used by the program.
|
| The list of directories to be searched
| is stored in the file /etc/ld.so.conf.
|
| Searching all of these directories at
| program start-up would be grossly
| inefficient, so a caching arrangement is
| actually used. The program ldconfig(8)
| by default reads in the file
| /etc/ld.so.conf, sets up the appropriate
| symbolic links in the dynamic link
| directories (so they'll follow the
| standard conventions), and then writes a
| cache to /etc/ld.so.cache that's then
| used by other programs. This greatly
| speeds up access to libraries. The
| implication is that ldconfig must be run
| whenever a DLL is added, when a DLL is
| removed, or when the set of DLL
| directories changes; running ldconfig is
| often one of the steps performed by
| package managers when installing a
| library. On start-up, then, the dynamic
| loader actually uses the file
| /etc/ld.so.cache and then loads the
| libraries it needs.
How does Mac OS X deal with this issue?
Linux uses the cache file "/etc/ld.so.cache" to avoid the redundant search of directories. Linux uses "ldconfig" to update the cache.
How does Mac OS X avoid the inefficient redundant search of directories? -
T61 sound not working after re-installation
Hi,
I am re-installing Windows XP Pro SP2 on several laptops.
I have an issue with some T61.
The installation of the driver (found on Lenovo website) is successful.
Windows displays the sound icon, I can open it and change the volume but I can't hear any sound.
I am sure it was working fine before re-installation.
I have tried two ways:
- installing KB888111, then sound driver
- installing SP3, then sound driver
But none is working.
Do you have an idea of anything I could have missed?
Where can I get previous versions of the drivers?
Thank you.
Solved!
Go to Solution.Solved.
The computer was on mute after re-installation and the button above the keyboard wasn't working properly (I had to press really hard).
Thank you. -
Qosmio F20-141 - Cannot start Win XP PRO SP2 installation.
Cannot start Win XP PRO SP2 installation.
After choose "start from CD" i can see for a little time only starting message ~"Starting Wisdows XP installation" (little white letters on top of black screen)
After this computer hungs in black screen.
QOSMIO F20-141 for Russian Federation
M/N: PQF20E-02801YRUHi again
You should try to start the OS installation with Recovery CD and/or with the Windows XP CD. If this both procedures doesnt work so I assume there is something wrong with the hardware. Maybe a faulty HDD. In this case the best way to solve this issue is to contact the ASP -
Computer won't start properly after Leopard installation attempt
Yesterday I tried to install Leopard 10.5.6 on my G5 (currently running Tiger 10.4.11) and ran into a ton of problems. First, a message came up preventing me from upgrading without erasing my hard drive. I decided to quit the installer and back up my drive before erasing it, but after trying to start up again on my main disk, the computer will no longer get past the Apple logo screen. It stays that way for several minutes, and the computer revs and revs until it's at max RPM, then the computer just shuts off. I can't access my data to back it up.
I did some internet research and tried started up from the install DVD again (which still works) and tried to repair my disk using Disk Utility. This didn't work and an error message came up: "Attempted to Repair Disk, attempt failed. Invalid Node Structure, Volume Check Failed. Error: The underlying task reported failure on exit."
If anyone has any advice I would be VERY grateful, I am hoping to not have to have the computer repaired as I already have my other Mac out of service as well and the cost of repair has been high. I need to back up some important files before I update to Leopard, is there any way to do this while starting up from the DVD since my Startup disk doesn't work now? What happened??!!!Is it possible that the piece stuck in the audio jack has resulted in turning off the internal speakers?
I would say that the Leopard installation is not 100%. Sometimes this happens. Or you may have a piece of software installed that mutes the speakers, and it needs to disable that. If it's not the latter, then I would erase the hard drive and reinstall from scratch. If that's not feasible then you can do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
Maybe you are looking for
-
Dear Freinds, I need to get a pdf from DMS and print that to a smartform report, can any one suggest what to do ... currently i am able to print the bitmap file . but i need to workout with pdf file .. Thanks in advance Deepak
-
I encountered an installation error
I tried to install the adobe reader XI (11.0.04) abd tge installation failed. The notice I get is that Installer encountered an error that caused the installation to fail and asks me to contact the software manufacturer for assistance. I also cnat op
-
Help with uninstalling Elements 10 and installing Lightroom 4
Help - trying to install Lightroom 4 but I need to also uninstall Elements 10 - it wont let me do it - keeps saying that it is installing something else - Error 1500.
-
Do I have the latest Mac air book ?
I was asked if I have the latest Mac air book but not sure... Could someone help? I have an 11' MacBook Air, 1.3 GHz, with 4GB 100 MHz DDR3. TIA
-
Can I Retrieve Files From Time Capsule?
I had a MacBook Pro that was fully backed up to a Time Capsule. The laptop was stolen last week. I have some files (photos I wanted to use for holiday cards) I wanted to retrieve while I save up some money to buy a new MacBook. I have two powerbooks