XP and service pack 2

I have an old copy of XP I purchased in 2002. I am not sure, but I doubt that Service Pack 2 comes with it. How can I find out. The warning on Boot Camp says not install XP unless it is Win XP with Service Pack 2.
Is there a way I can install XP on our new alum iMac (20 inch, 2.4 ghz)?
Any tips are appreciated.

Thanks for the pointer. There are so many steps to slip stream XP and the Service Pack that I am virtually certain it will never work using Vista. Vista is just a pig that doesn't work. It just never does. Not ever.
That is why I am trying to migrate to a Mac OS.
I am going to give it a try when I have a day or two free I guess. I am certain as death and taxes that Vista either won't DL the SP or won't allow me to combine the two together and make a new XP boot CD.

Similar Messages

I have an HP-Pavilion Vista PC with MS Office 2007 and Service Pack 2. Each time I try to save a Wo

I have an HP-Pavilion Vista PC with MS Office 2007 and Service Pack 2. Each time I try to save a Word or Excel document I get the “Not Responding” message. The “Word is saving……” bar at the bottom does not show any progress. On clicking the document I get a faded version even when in Safe Mode. Somehow the document appears on the Desktop where I tried to save it. On trying to open the saved document, even as administrator, I get the following ”File in Use” message:
“The ….docx is locked for editing by….” and I am asked three questions including:
“Do you want to open a Read Only copy” yet on clicking “Yes” I am able to edit the same document.
On trying to save to a different location I get the message:
“Your autocorrect file MSO 1033.ad could not be saved. The file may be read only or you may not have permission to modify this file.”
The same message stating FILE12\1033\MSO.ACL MSO 1033ad recurs with new Excel documents.
How can I correct this problem?
PS
Worse still, the HP Advisor icon that appears on startup does not load successfully while showing the message: “Access to the path Hewlett-Packard\HD Advisor is denied”.
What can I do about it?
ZDK

I'm having the same issue, allowing guest access on the share did change the logs I'm getting in Samba. Earlier on it was giving errors on the inability of guest access to the share.
============================================================
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(37)
INTERNAL ERROR: Signal 11 in pid 4204 (3.0.10)
Please read the appendix Bugs of the Samba HOWTO collection
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(39)
============================================================
I also noticed that the temporary file that is created by office is not removed after the attempt to safe the file. (something like: ~$filename).

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

Having problems downloading itunes 10.5.2; box states windows installer issue. I have a 2005 with windows XP and service pack 2. Any ideas?

Just bought a new ipod touch for my daughter. It won't sync without itunes 10.5.2 loaded on our computer (a 2005 HP with Windows XP and service pack 2.) When I've tried to load 10.5.2, I get an error message box stating there is a problem with my Windows installer. I've tried loading the windows installer hot fix KB942288-v3-x86, but it didn't help. Any suggestion?

Hi Lorheak,
thanks for the quick reply. I had the same idea already yesterday. I use Norton Internet Security for a long time now without any problems. I think this a Apple or Microsoft problem, because the popup window which appear come from Windows DEP. I got no message from the firewall with any problem. I check the log files from Norton and Windows already but find nothing. This is a very strange problem. In the past I have had a lot of other problems with iTunes upgrades. Everytime I accept the installation of the newest version I got errors regarding missing "msi" files.
Greetings Gert

List all servers with OS and service pack

Is there an easy way using any script or software to list all servers joined to your domain including operating system (i.e. server 2008) and service pack level, without having to check each manually?

Hi Cf090,
The limit is used to Specify the number of objects to return that matches the criteria that you specify. If you specify a value of
0 for <NumberOfObjects>, this parameter returns all matching objects. If you do not specify this parameter,
dsquery displays the first 100 results by default.
For more detailed information to use dsquery, please refer to this article:
http://technet.microsoft.com/en-us/library/cc754232.aspx
If you have any other questions, please feel free to let me know.
Best Regards,
Anna

Need list of Crystal Reports Version Numbers by Product and Service Pack

Hi All,
Where can I get a list of Crystal Reports Version Numbers by Product and Service Pack? I'm trying to figure out which version we have is the most current version, because we have so many version installed threw out our company.
Thanks.

Hi Matt,
Please check the crystal Report 2008 product versions
Cr 2008+SP0 - 12.0.0.683
Cr 2008+SP0 + FP1 - 12.0.0.796
Cr 2008+SP0 + FP2 - 12.0.0.840
Cr 2008+SP0 + FP3 - 12.0.3.900
Cr 2008 + SP1 - 12.1.0.882
Cr 2008 + SP1 + FP1.1 - 12.1.1.957
Cr 2008 + SP1 + FP1.2 - 12.1.2.996
Cr 2008 + SP1 + FP1.3 - 12.1.3.1028
Cr 2008 + SP1 + FP1.4 - 12.1.4.1068
Cr 2008 + SP1 + FP1.5 - 12.1.5.1096
Cr 2008 + SP1 + FP1.6 - 12.1.6.1116
Cr 2008 + SP1 + FP1.7 - 12.1.7.1144
Cr 2008 + SP1 + FP1.8 - 12.1.8.1176
Cr 2008 + SP1 + FP1.9 - 12.1.9.1290
Cr 2008 + SP1 + FP1.10 - 12.1.10.1390
Cr 2008 + SP1 + FP1.11 - 12.1.11.1454
Cr 2008 + SP2 - 12.2.0.290
Cr 2008 + SP2 + FP2.1 - 12.2.1.412
Cr 2008 + SP2 + FP2.2 - 12.2.2.453
Cr 2008 + SP2 + FP2.3 - 12.2.3.467
Cr 2008 + SP2 + FP2.4 - 12.2.4.507
Cr 2008 + SP2 + FP2.5 - 12.2.5.537
Cr 2008 + SP2 + FP2.6 - 12.2.6.567
Cr 2008 + SP2 + FP2.7 - 12.2.7.598
Cr 2008 + SP2 + FP2.8 - 12.2.8.638
Cr 2008 + SP2 + FP2.9 - 12.2.9.698
Cr 2008 + SP2 + FP2.10 - 12.2.10.810
Cr 2008 + SP3 - 12.3.0.601
Cr 2008 + SP3 + FP3.1 - 12.3.1.684
Cr 2008 + SP3 + FP3.2 - 12.3.2.753
Cr 2008 + SP3 + FP3.3 - 12.3.3.812
Thanks,
Naga.

Crystal Reports XI Release 2 and Service Pack 2 upgradation

Hi,
I need your support to upgrade and migrate to Crystal Reports XI Release 2 and Service Pack 2 in my development server.
I am currently upgrading my Crystal enterprise version 9 with the Crystal Reports XI Release 2 and Service Pack 2. I have the below questions to be clarified. Appreciate if you can reply me ASAP. Thanks.
My Environment:
O/S - Windows Server 2003 Standard Edition; Version 5.2 (Build 3790); Service Pack - 1
RAM size - 1 GB
Installed software - Crystal enterprise 9
1) After successfully upgraded with the XI version, all my current user accounts and existing reports are not available in the upgraded version. Pl. suggest me, how to migrate my existing connections and all the existing reports?
2) In my server, SQL Server is not installed. But SQL Server instance (SQL Server 7.00.623) is running in my taskbar (desktop). If I stopped the SQL Server instance, the "Crystal APS" in the Crystal Configuration Manager is stopped. What information is stored in the SQL Server?
3) What is the default SQL server version bundled with Crystal Reports XI Release 2 Service Pack 2? What is the SQL server version you recommand?
4) Will the Crystal Reports XI Release 2 SP2 supports the SQL Server 7.00.623?
Regards
Sanrajesh

Hello, Sanrajesh,
You have been using Crystal Enterprise 9.0 and now you are installing Crystal Reports XI R2. Is that correct?
Crystal Reports XI R2 is just the Crystal Reports designer and runtime for development.
Crystal Reports XI R2 does not have the functionality of Crystal Enterprise. The upgrade would be Crystal Enterprise 9.0 to Business Objects Enterprise XI R2. (11.5)
A full BusinessObjects Enterprise installation will install the appropriate MS SQL Server for it's own use.
Will this be the Enterprise server or just the Development system to create an application connecting to your BusinessObjects Enterprise server?
What development language will you be programming in?
If you have BusinessObjects Enterprise installed elsewhere you only need the appropriate development components on your system and connect to the server in code.
Our BusinessEnterprise Support team would assist you in the upgrade from Crystal Enterprise 9 to Business Objects Enterprise XI R2 if that was your plan.
Then we could discuss the development requirements.
Elaine

OSS notes and service packs

Hi,
Can anyone elaborate me the difference between OSS1 transaction and SNOTE transaction in relation with application of OSS notes ?
Also, what is the difference between SAP service pack and OSS notes ?
Are SAP service pack similar to windows service packs ?
Whose job is it to apply OSS notes and service packs ?
Regards,
Tushar.

A service pack is generally a collection of the (release dependent) OSS notes that have been created since the last pack.
If you have done custom development on an SAP object, that development will likely be lost if an OSS note modifies it. You will have an opportunity to review the changes using transaction SPAM when service packs are applied.
Rob
Message was edited by: Rob Burbank

Cannot download iTunes to PC with Windows XP and service pack 3. When I hit "download" it goes straight to the thank you screen but does not download anything!

Cannot download iTunes to PC with Windows XP and service pack 3. When I hit "download now" it goes stright to the "thanks for downloading" screen but downloads nothing.

I can't answer that. I'm just a user. Apple makes it decisions and does not share that with anyone here as you well know. Apple has also stopped supporting syncing contacts and calendar with the latest version of OS X, Mavericks. Users have to use iCloud. Many are not happy about that. Let Apple know how you feel here: www.apple.com/feedback and click on the appropriate link.

Difference between Service pack 13 and Service pack 22 in PI 7.0

Hi,
Kindly spcify the difference between Service pack 13 and Service pack 22 in PI 7.0
Thanks

Dear Nair,
It is always recommended to apply the latest Support Packages on the PI system. The reason being that a lot of fixes are included in the latest SPs. Also, the perfomance of hte system will be improved with the latest SPs.
Best Regards
Nishwanth

ORADC problem on Windows 2000 with Service pack 1 and service pack 2

Hi,
I have a VB application running on NT4.0 workstations. It uses
ORADC control to talk to ORACLE 7.3 When I load it on Windows
2000 with service pack 1 or service pack 2, I encounter some
problems.
The ORADC control is used in most of the VB forms and the
Refresh method of the ORADC conrol is used to refresh the APEX
TRUE DBGRID PRO control. When this action is executed, I receive
a run time error
"Method Refresh of object '_DORADC' failed Err#: -2147417848
It works fine when no service pack is applied on Win2K.
Can anyone tell me what's going on?
Thanks

satheesh_p wrote:
Thanks for your reply.
When I checked the system requirements. I couldn't find information on windows 2003 service pack 2
link http://www.adobe.com/products/coldfusion/systemreqs/.
Whether your OS is windows 2003 with service pack 2?
Are you sure coldfusion 8 will work on windows 2003 with service pack 2?
Regards,
Satheesh.
Well it was there, if you understand the naming properly:
ColdFusion 8 system requirements
Windows
Intel® Pentium® II or AMD Athlon processor
Microsoft®
Windows® 2000 Professional with Service Pack 3; Windows 2000 Server,
Advanced Server, or Datacenter Server with Service Pack 3; Windows
Server® 2003 Web, Standard, or Enterprise Edition with Service Pack 1
and R2; Windows Server® 2008; Windows XP Professional or Home Edition;
or Windows Vista®
R2 is the "offical" Microsoft name for service pack 2.

How can I tell my current Weblogic server version and Service pack

Hello,
I was wondering how can I tell what my current
weblogic server version is and what service pack
it is at.
Thanks.

use 'java weblogic.version'
ensure weblogic.jar is in the classpath

IPods and Service Pack 3 for Windows XP

If you have installed Service Pack 3 for Windows XP, an issue may arrise that will not allow iPods to function. You will get an error that the iPod Service Module has experienced an error and needs to close.
If you see this error, first check to see if you can see any of your devices in the Device Manager. To do this, click on Start, the right click on My Computer, then click on the Hardware tab, then click on the Device Manager button. If this window is blank, you will need to call Microsoft directly at 800-642-7676.
The reason that the Device Manager is now blank is that if you were running any Anti-Virus program while Service Pack 3 was being installed, there was a certain file that was prevented from running that was designed to clean up the registry after installation. Since this file did not execute, that is why your Device Manager is now blank and your iPod will not work.
A word of caution though. When you call Microsoft, do not tell them that the reason you are calling is that your iPod does not work due to Service Pack 3. If you say this, they will want to charge you $80.00 for tech support. On the other hand, if you say that you recently installed Service Pack 3 and have noticed that the Device Manager is now empty, you will now get the tech support for free.
I write this for any who might be experiencing this problem as Apple Tech Support has informed me that this is one of their biggest tech support issues in the past couple of months since Service Pack 3 was released.
Gr81isback

Still useful as of 12/30/11. Have ten Lenovo 5042 computers with downgrade licenses to run XP and have a ghosted image from another Lenovo 5042 having and Intel cpu. My target computers all have AMD cpus in them and the image would continuously reboot on
the AMD computers.
Used method 1 and it cleared the problem instantly, many thanks for the post and the time and effort it took to dig up the answer..

5.1 and Service Pack 4

I've gone through the instructions to install service pack 4, but I am
unable to tell if it is installed correctly. When I try to run
weblogic.Admin, I get the following error message:
E:\DH>java -classpath e:weblogic\lib\weblogicaux.jar;e:\weblogic\classes
weblogic.Admin t3://dhemphill:7001 VE
RSION
Exception in thread "main" java.lang.NoClassDefFoundError:
com/sun/java/util/collections/ArrayList
at weblogic.kernel.Kernel.declareProperties(Kernel.java:253)
at weblogic.kernel.Kernel.ensureInitialized(Kernel.java:107)
at weblogic.common.T3Client.<init>(T3Client.java:218)
at weblogic.common.T3Client.<init>(T3Client.java:269)
at weblogic.common.T3Client.<init>(T3Client.java:347)
at weblogic.Admin.connect(Admin.java:132)
at weblogic.Admin.main(Admin.java:303)
This is confusing, since I can find java.util.ArrayList.class, but I
cannot find com.sun.java.util.collections.ArrayList anywhere on the
installation.
I did find version.exe and ran this, but the output indicates the
service pack is not installed.
E:\weblogic\bin>version
WebLogic Build: 5.1.0 04/03/2000 17:13:23 #66825
Just FYI, I am able to verify that the classpath and weblogic_classpath
have the jar files specified first in the path (as indicated when
starting weblogic using the startWeblogic.bat utility).
David Hemphill
Senior Consultant
Catapult Technologies (www.catapult-technologies.com)
612-916-6698 (cell)

Hi
1. Yes you can. You should make sure that the system has enough resources so that BO and DI are not blocking each other (sizing)
2. I would separate the installation by choosing two different users. NFS mounts have proven a bit unstable and can cause problems if they are down.
3. You need to check with your account manager
4. Please post in the DI forum
Please note that the forum etiquette does prohibit urgent requests. The forum is a place to get information or opinions, if you need urgent request please use the appropriate SAP channels e.g. Field Services
Kind Regards
Roland Hoeller

Software Updates And Service Packs Not Showing As Required

I have a few clients where when I do a scan with Windows Update it will show a few updates. These updates are synced in the Configmgr console. But it says they are not required. One of them is a service pack even.
I have checked and both the hardware inventory and software update scan have run within the past 24 hours.
I ran a homepage summarization, but still no luck.
What would my next step be?

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

XP and service pack 2

Similar Messages

Maybe you are looking for