XP can not logon to network?

After installing winXP my computer reboots, starts in windows and asks for a user password. I did not create any passwords during the install. When I hit the green arrow I get an error message that windows could not log me on to the network. Any ideas would be great. I have re-installed XP twice and have the same problem each time.

I am checking with server team for any changes in LDAP, so far they can't remember any change that could affect. Especially the AD account we are using is same for couply of my other web apps as well.
In other hand, is it possible that I could use admin account since it is local account?
Here is the result of tarantella config list | grep login
login-ad-base-domain: uci.edu
login-ad-default-domain: hs.uci.edu
login-ad: 1
login-anon: 0
login-atla: 0
login-autotoken: 0
login-ens: 1
login-ldap-pki-enabled: 0
login-ldap-thirdparty-ens: 0
login-ldap-thirdparty-profile: 1
login-ldap-url: ldap://hs.uci.edu
login-ldap: 0
login-mapped: 0
login-nt-domain: orgds1.hs.uci.edu
login-nt: 1
login-securid: 0
login-thirdparty-ens: 0
login-thirdparty-nonens: 1
login-thirdparty-superusers: sgd_trusted_user
login-thirdparty: 0
login-unix-group: 1
login-unix-user: 0
login-web-tokenvalidity: 180
login-web-user: ttaserv
server-login: enabled
Thanks again for all the help to figure this out.

Similar Messages

I can not map a network drive in window 8.1 under VPN

Dear sir / madam,
I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
1. I success to map drive and then logout / switch user.
2. wait two /three hours
3. i find the drive is disconnected.
4. when I try to reconnect, window can not find again. then I try to use netstat
C:\Windows\system32>netstat
TCP 172.28.97.31:58206 test-server:http TIME_WAIT
Then, i try to use cmd , net use /delete and then try to reconnect test-server
5 it show reconnect successful by net use command. However , I need waste many time and I can not find the drive in window.
if I restart window, i can reconnect it quickly and find the drive in window.
the server are window server 2008 r2 and server 2012, they located at difference site.
if the server and PC located at same site, it is no problem.
both the server and PC are joined in same domain.
it is dell server and Lenovo M82 PC( Intel Lan 82579LM/V Driver)
please help me to solve the problem
(window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
thanks

Hi,
How did you map the network drive? Manually via GUI? Command? GPP? If you're using one of the above solutions, then try other solutions as a alternative way to check the result.
According to your description, If Windows remains unable to reconnect mapped Network Drive at login, then I would suggest you created a batch file with net use command, use it as an logon script, this provides an alternate way to reconnect drives on
a re-logon.
example
@echo off
net use * /delete /yes
net use x: \\server_name\shared_directory_name
You can find detailed information in the following link
https://helpdesk.egnyte.com/hc/en-us/articles/201638304-Mapping-a-drive-using-a-net-use-command-and-logon-scripts-for-domain-users
http://technet.microsoft.com/en-us/library/bb490717.aspx
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Built-in Admin and local admin accounts can not logon locally

When I attempt to logon locally to a Windows 7client as the built-in administrator or local admin I receive the message "You can not logon because the logon method you are using is not allowed on this computer"
I can logon as a network administrator. I run gpedit.msc to see the current group policy.
Local Computer Policy/Windows settings/Security settings/Local policy/User Rights Assignment/Allow log on locally is set to EVERYONE, Administrators
Local Computer Policy/Windows settings/Security settings/Local policy/User Rights Assignment/Deny log on locally is set to NONE
This makes no sense as to why the local admin or built admin cannot logon.

Hi,
What is the network environment? Are you in a domain? Group Policy processing has a precedence, local GPO has the lowest priority, please make sure that it's not overwritten by other GPOs.
After setting the policy, make sure to run gpupdate /force to update the policy.
Does this issue happen only on this specific computer? Another situation is that the profile is corrupted, delete the profile and recreate one, and check if it works.
Yolanda Zhu
TechNet Community Support

I can not map a network drive in window 8.1 via VPN

Dear sir / madam,
I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
1. I success to map drive and then logout / switch user.
2. wait two /three hours
3. i find the drive is disconnected.
4. when I try to reconnect, window can not find again. then I try to use netstat
C:\Windows\system32>netstat
TCP 172.28.97.31:58206 test-server:http TIME_WAIT
Then, i try to use cmd
5 it show reconnect successful by net use command. However , I need waste many time and I can not find the drive in window.
if I restart window, i can reconnect it quickly and find the drive in window.
the server is window server 2008 r2 and located at difference site.
if the server and PC located at same site, it is no problem.
both the server and PC are joined in same domain.
it is dell server and Lenovo M82 PC
please help me to solve the problem
(window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
thanks

Hi,
Is there any error message throwed when you reconnect the mapped drive? Can you directly access the UNC path of the mapped drive? What VPN programs do you use? Please check if the VPN client connect correctly.
You could refer to the thread below to check if the AD account is restricted by VPN.
Can't access mapped drives through VPN when away from office
http://social.technet.microsoft.com/Forums/windows/en-US/a0ca41aa-08b8-4e46-a314-ffb7e401bd7a/cant-access-mapped-drives-through-vpn-when-away-from-office?forum=w7itpronetworking
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I am unable to re-install itunes. The installer starts ok and then indicates that it can not access a network !!

I am unable to re-install itunes. The installer starts ok and then indicates that it can not access a network !! I have tried to uninstall but get the sme error message. I have used 3rd party software to uninstal but still have no joy. My pc is running Vista.
Can you anyone offer a working solution ?

Many thanks.
Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled

Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except join not extend and I can not get a network on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Rout/

Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
Airport gets it address DHCP.

Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
Note that the Express will not provide any additional wireless coverage when it "Joins".

Can not access home network via ipod touch, password entered not accepted

Can not access home network via ipod touch, password entered not accepted
Trying to help my son set up his ipod touch to connect to the network and the password I entered is not accepted.
1. Which password is required? I entered the password I use for logging into my router
2. The home network is recognized, when selected it requires a password to be entered, but I am just not sure what password it is looking for to connect.
I have not been able to find any information on this subject

jersey0904, Welcome to the discussion area!
You need to enter the wireless encryption password... not the administrative password for the router.

My macbook pro can not found any network WI-FI

My mac book pro can not found any network in wifi but after turn of and turn on WI-FI for more than 10th it can found network and of course my network
interesting is when i leave my room with my labtop without any trun of or on wifi, network can detect every WI-FI!!!
any ideia ??

Hi alirezaDavid,
If you are having WiFi issues with your MacBook Pro, you may find the following article helpful:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
- Brenden

Imessage wont connect using my apple id says can not connect check network conection and my network connection is fine what do i do

having trouble with imessage since i updated to the ios7 cant get it to connect to imessage when i use my apple id says can not connect check network connection and my network connection is fine does anyone know what to do to fix this

i have the same problem but i didnt update

TS1398 My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

SAP* Activated but SuperAdmin can not logon

Hi there,
After EP60.2 SP4 default installation, (HP-UX/Oracle9i), SAP*/06071992 can not logon a instructed, even the SAPUM.log shows:
Aug 30, 2004 7:25:14 AM | Warning | SAP* | LOGIN.OK | USERACCOUNT =
UACC.SUPERUSER_DATASOURCE.SAPASTERISK | | IP Address=[useripaddress]
Any solution?
Regards,
AAAttar

Hi all
Based on : <i>"When using SAP*/06071992, the screen and the form refreshes, nothing happens. if I choose diffirent password, I got msg.:
User authentication failed"</i>
somtehing must go wrong with the dynamic session cookie used by portal.
I suggest u check cookie handling on your browser (by the way which one is it ?)
Cookie handling can also be affected by your client os (XP, 2k, 98...) so i suggest some testing on other clients.
Note : I experienced similar pb and found out ultimately that IE6 stops handling dynamic cookies URL contains unsupported DNS characters (like underscores...)
good luck
Frank

Ipad can not connect to network

Can not connect to Internet

Does the iPad connect to other networks?
Does the iPad see the network?
Any error messages?
Do other devices now connect?
Did the iPad connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Help....Can not find any networks

All of a sudden my Ipod can not find any connections. Even the one at my house. IT has to be the IPod because I have my moms IPod right next to mine and hers is finding the network and connecting just fine.
Ihave already did a restore, and I also reset the network settings

Next step it to restore to factory defaults in case there is some corruption which is now in the backup. If that does not work then you may have a hardware problem.

TS2972 My Apple TV 3 can not set time network, since one week from now, before was working perfectly

My Apple TV 3 just stop working, it can not set the time network I have call for support and done everything as requested and still nothing, can somebody help me with This it has pass a week and nothing yet. I even restored as support toll me too, no timé still can be set. HELP PLEASE

I have the exact same problem as KAR1973, and have tried everything. Relatively new latest Gen ATV, worked fine for couple months, then suddenly today will not set network time, will not activate, and only shows the "computer" and "settings" icons on menu screen. Will not allow me to log into AppleID/Itunes account.
Very frustrating. Tried resetting, restoring (on screen and directly connected to Itunes) mutliple times, rebooted router multiple times, even checked the ntp settings in router (get network time shows as "enabled"), tried it all on wireless and ethernet, and still same problem.
Appears many people have same problem based on google searches. My question is what is Apple doing about this?? Am tired of spending hours trying to figure this out, so am putting it away, and will buy a Roku or another competitor's box instead.
Apple needs to do a better job standing by its product, figure out what the problem is, and put out some helpful guidance, particularly for people who don't have advanced computer or network expertise (inculding myself.)

Can not setup a network connection when I re-install Solaris

Hi,
I got a problem during the Solaris 7 installation in an Intel Platform. At the 1st time of installation, after I finished the Host Name window, the installation program would popup a "Network Connectivity" window to ask me "Networked: Yes/No". I chose No. The installation continued. Finally, the installation finished successfully. Then I realize I may need the network support. So I formatted the Solaris partition and started the installation from beginning. However, at this time, the "Network Connectivity" window never popup. After I finished the Host Name window, the installation program immediately switches to the "Time Zone" window. I tried several times. No chance to set up the network again. I guess the installation program may save some flags in some place (floppy disk?, CD?, NT partition?). Those flags can not be removed by formatting the Solaris partition. I searched around but could not find out anything. Can you help?
Thanks,
Kevin

Kevin:
I can think of a few things that may have gone wrong.
i) Do you have a supported network card. See the following site.
http://soldc.sun.com/support/drivers/hcl/
ii) When you start installing Solaris. There is an option to install from different Media (Harddrive, CDROM and network). During this time did Solaris give you an option to install of the network. This is a sign that Solaris is able to see the network card.
iii) You do not need to re-install if you need to add networking to Solaris. There are many ways to add the networking feature. The simplest is to use the sys-unconfig command. Please NOTE THIS WILL REMOVE ALL CONFIG INFO ON YOU SYSTEM.
Hope you get the network working, 'Cos "Network is the Computer" :-)
Angelo
Sun Developer Tech Support.

XP can not logon to network?

Similar Messages

Maybe you are looking for