XP Driver for Web-Cam model no. 1100001212

hi,
search XP driver for my webcam model no. 000022
thx
baddie

Hi, exactly the matrix driver is the right one for the Sata controler look here
choose the right version for your chipset , look for version for floppy 32bit , run it take some diskette put , and this file will put the drivers right to diskette, then copy this files from diskette, and save them somewhere on the hard (by the way DO THIS ON SOME other computer) . the name of the floopy manager file is "f6flpy32"
If you already have the sata drivers (extracted files from this file ''f6flpy32'')
Take the tirth party program called: "nLite" copy the disired windows to a folder on the pc, and then turn on the nLite program (the program runs only on windows XP SP2 or Windows Vista) and follow the steps first screen is for the windows that you already copy on the pc (choose where is he) secound screen i think was for the sata driver (choose where is he) and follow the other steps until it finish, then will run to modify the new windows (with integrated sata driver for sata for XP).
here is the right link for the matrix driver for L40-14F http://www.intel.com/support/chipsets/sb/CS-025753.htm
(Choose Intel?® Matrix Storage Manager, choose XP, then Floopy "
32-bit Floppy Configuration Utility for Intel?® Matrix Storage Manager")
Good Luck!

Similar Messages

  • Driver for web cam in pavilion dv7 1426 nr, win 7 enterprise

    wen i start to use my webcam, the laptop get frozed and ia have to restart it, only by pressing the turn on button. i realy don´t now if this problem start wen i change de OS from the original vista to Win 7 enterprise...

    It could possible be a driver issue. Can you update the latest drivers for the BIOS and the cyberlink youcam software from the following link and check if this helps:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3983​...
    Although I am an HP Employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

  • Web Camera Model Number

    Hi, I lost my driver CD for Creative web Camera. I dont know how to get my model number. Can any one please help me get my web cam model number and also the driver. Warm Regards,Hari

    You can use this guide to assist you in finding the model/serial numeber.
    Jason

  • Driver for LabVIEW camera JVC TK-S241E

    Hello,my name is Miguel Morales, as a part of my research investigation I need to adquire images from a JVC camera model TK-S241E (analogic). I would like to know if there's any driver for this camera for the LabVIEW products , or how I can manage to use this camera with the LabVIEW software

    Hello Miguel,
    The camera you specified is not tested and therefore not supported by National Instruments, in other words it does not exists a necessary camera file, and the camera has not been tested with any of our frame grabber boards.
    If the camera you wanted use was either a digital parallel camera or a camera link camera you would have the opportunity to produce the camera file yourself with out NI Camera File Generator.
    What kind of frame grabber board do you have today?
    Regards,
    Jimmie A.
    Applications Engineer
    National Instruments Sweden
    Regards,
    Jimmie Adolph
    Systems Engineer Manager, National Instruments Northern Region
    Bring Me The Horizon - Sempiternal

  • Does camera raw support the Nikon D5300, if not when there will be an update for this camera model?

    Does camera raw support the Nikon D5300, if not when there will be an update for this camera model?

    The asterisk next the model number on the download page linked above means there is preliminary support, which usually means the camera is supported by pretending it is an earlier model with similar sensor.  This can lead to color issues, so while you can convert your NEFs to DNGs with the DNG Converter, and open them with PSE12, now, save your NEFs and be prepared to revisit those pictures once the final release of ACR 8.3 occurs probably in the next few weeks, with finalized support.

  • How to write API for web cam?

    who knows how to write API for web cam?

    if you mean capture from the cam try JMF I've done it a million times
    salut

  • Re: Driver For PD1110 Camera

    I found a suitable driver for this camera. I just installed and it works! I downloaded the NX version the guy had. Here is the link http://www.inetbridge.net/forum/driver-creative-labs-pd0-driver-vt933.html
    Good Luck and let me know if you have any questions!
    Todd

    Hi:
    If your DVD drive isn't working, try each of the resolution steps at the link below.
    One of the steps, 2, 3, 4 or 5 should take care of the problem if the drive is not broken.
    http://support.microsoft.com/kb/314060/en-us

  • Driver for Qualcomm Atheros model QCWB335 Windows 7(64)

    Sorry that one didn't work for you. Unfortunately, I don't have any other suggestions for you to try.  

    Hello. I am looking for a Driver for Qualcomm Atheros Model QCWB335 for Windows 7(64). (802.11 b/g/n WLAN and Bluetooth(R) [1x]) I tried the HP support system discovery and recommended driver report, it reads incorrect hardware and product. I tried this soulution hoping for backwards compatibility, but it did not work. http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Driver-for-Qualcomm-Atheros-model-QCWB335/m-p/4073978/highlight/true#M70244 My notebook is an HP Pavilion 17t (f000?)  P/N: J5R51AVI upgraded the BIOS to F.34Windows 7 Ultimate (64)Installed drivers sp67265, sp68433, sp67625, and failed to install the sp66402. Ethernet connection works, WLAN and Bluetooth do not.The WLAN and bluetooth worked fine with Linux Ubuntu 14.04  History of the laptopOn Feb 5th, 2015 ordered from factory:HP Pavilion 17t Windows 7 Professional P/N: J8H36AV with 802.11 b/g/n WLAN and Bluetooth(R) [1x] Received:HP Pavilion 17t Windows 7 Professional P/N: J5R51AV with 802.11 b/g/n WLAN and Bluetooth(R) [1x] Worked great out of the box. Tried to install Ubuntu as a dualboot, and discovered I would need to tweak the Ubuntu install to work with the 4 partitions HP had already set up on the hard disk. Instead, I backed up Windows with the Windows backup, created a bootable recovery disk on to a USB via HP recovery wizard. The HP recovery wizard said the USB recovery disk was a success. I reformatted the hard drive usint Active@ killdisk and installed Linux Ubuntu 14.04 successfully. Everything on the laptop worked, including the WLAN and Bluetooth. Backed up Ubuntu using the Ubuntu backup utility, and also created a clone of the hardrive using Clonezilla live 2.3.2. Attempted to boot from HP Recovery disk on USB and it failed. Tried again, failed. Contacted HP, they graciously sent out recovery disks for free. Only they sent recovery disks for Windows 8.1, so I contacted HP again and they graciously sent recovery disks for Windows 7. Recovery disks would work almost all the way through the Windows installation, giving 3 errors and allowing an install log to be copied. The errors were "chkErrBB.CMD Detect some error during PININST_BBV.", "check c:\system.sav\logs\BurnBootWarn.log.", and "check c:\system.sav\logs\BurnBootMerg.log." Scanning the hardrive showed that the 4 partitions HP factory installs were installed, but the Windows folders were shell folders. HP support had contacted me and suggested I send the laptop in and pay them to install the restore, and I instead purchased Windows 7 Ultimate for a clean install.  Using HP support driver tools, it reports the wrong notebook and suggest drivers for a WLAN radio that I do not have installed on the motherboard.  I updated the BIOS to F.34 and that did not help. I don't know how to extract the driver from the HP driver and utilities recovery disk HP sent me, it is in a file format I do not know how to manipulate. I can connect to the internet using the ethernet cable, just not the WLAN.

  • 32 bit hd graphics driver for windows 7 model-15-d006TU

    plz plz
    32 bit hd graphics driver for windows 7 model-15-d006TU

    Hi:
    You should be able to use all of the W7 32 bit drivers except the audio from the HP Probook 450 G0.
    DO NOT USE ANY BIOS OR FIRMWARE DOWNLOADS FROM THIS LINK
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359407&spf_p...
    For the audio, accept the agreement, download and install the first file on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...

  • For which camera model is Aperture the best RAW converter?

    Most of you will agree that Aperture's workflow can hardly be beaten. Most of you will also agree that there is indeed some potential for further improvement concerning support of different camera models and in the over all image quality of the RAW conversion engine.
    Reading the numerous postings I get the idea that many people believe to get at least slightly better results when doing the RAW conversion with some other software than Aperture.
    Speaking for my own experience with the Olympus E-1 (which is on the list of fully supported DSLRs) the results from Adobe PS CS2/ACR or Lightroom with seperate tools for sharpening and noise reduction (if necessary) are noticeable superior to what I can get from Aperture - but I am sure that the situation will be better with other camera models.
    So who of you is totally happy with what Aperture squeezes out of his RAW files and what camera do you use? Have you done comparisons with other RAW converters to be sure Aperture does the best job?
    Oliver
    PPC mini, PM Quad 4,5 GB RAM   Mac OS X (10.4.7)  

    I currently use a Canon 20D and a Canon 1Ds MKII for my work. I am happy with the conversion results for both cameras. I have use Capture One Pro for my conversions in the past. However, with Aperture's workflow and RAW conversion capabilities, I am using it fulltime.
    I really don't think that Aperture's RAW conversion is currently that bad, and I think it will only get better and better with time. To be blunt, I think that most complaints about the rendering quality of Aperture are a bit over-hyped. In fact, I would even say that in many cases, it's end-user error or system configuration that results in poor image quality.
    I would not have said this prior to version 1.1.2, but Apple has managed to greatly improve the rendering quality.
    Just my two cents.

  • Driver for Facetime Camera on Thunderbolt Display - Win 7 in Bootcamp

    I have  a Thunderbolt display working just fine on a Windows 7 installation using bootcamp on my Mid 2012 Macbook Pro Retina - except the driver for the facetime camera on the display is not installed.  The facetime camera on the Macbook Pro did install.  The bootcamp driver folder on my USB stick created for the install does not seem to include a driver for this.   I have already done a bootcamp driver package reinstall to no avail.  Has anyone gotten this working?  Can you give me the driver details and how you did it if so?
    Thanks.
    greg

    Now it has gotten worse. I wish I had documented what I had done, but I think it was after I ran some addtional updates. Can't remember if it was the Office updates or the addtional Win7 updates.
    But now besides the error message when I try to open my virtual machine in Parallels (which I got both before & after running Bootcamp updates), now 2x at least it did not boot into bootcamp but instead showed that there were problems & the fix screen came up. Again.
    I did manage to run the Windows backup on my new WD Passport partitioned back up drive w about 50 GB formatted for Windows & the rest of it for Mac so I can use it w Time Machine.
    It backed up files in libaries & personal folders for all users 1.86 GB
    But I'm hesitant to go ahead & upgrade Parallels 5 to 8 w the purchased update to download & run as well as doing the upgrade Mountain Lion. It does not seem wise to install new or additional software on top of an unstable Windows/Bootcamp set up.
    So wondering my options. I'm guessing that the solution to an unstable Windows OS would be to reinstall it as a clean install. But then the normal thing to do would be to run the updates which took a long time the other day & then messed things up so the track pad wasn't tracking well. Before later causing it to crash.
    Just got word from Parallels suggesting a claen install into Bootcamp.
    But also considering just installing it as a new virtual machine in Parallels & dispensing w Bootcamp.
    I hope this makes some sense. I'm very tired but want to put these questions out there so when I get back to it, hopefully there will be some suggestions/recommendations.
    Thanks.

  • Cloning DataSource for web cam

    I'm transmitting live video from a web cam over the network and storing the video to a QuickTime file at the same time. From my experience, this requires cloning a DataSource.
    Is it more efficient to clone the DataSource that is coming directly from the web cam and feed those cloned DataSources to separate Processors for RTP transmission and file storage,
    OR
    is it more efficient to clone the OUTPUT DataSource from a single Processor and use the output cloned DataSources for sending to file, etc. ?
    Thanks,
    Frank

    Cloning the input DataSource is one method that works. See "Video Capture Utility with Monitoring" in the JMF Solutions page for 3 other methods that could be employed that produce better quality.
    http://java.sun.com/products/java-media/jmf/2.1.1/solutions/JVidCap.html

  • Install latest drivers for web cam from hp

    im trying to  installdriver download for latest Web cam drivers from hp. i have a  HPg60

    Hi swoope69,
    Welcome to the HPCommunity, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I will be happy to find the latest software for your webcam. However, I will need some additional information as HP g60 isn't enough. Can I get the operating system that you are running and the product number for your notebook, please?
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • External DVD/cd drive for 2010 128G model

    good morning
    i am looking for a reliable external DVD/cd RW drive for my recently purchased 2010 MBAir 128G. I have read unfavorable reviews for Apples offering (about 50%) and would welcome any suggestions. Should I consider BluRay, or will that complicate matters?
    thank you in advance, chardagha

    Apple does not support BluRay so that is not a wise choice.  Any brand DVD drive will work with your MBA.  The most durable seem to be the tray loading models.
    Ciao.

  • Creative web cam model No. VF 0050. Drivers

    Hi, i somehow lost the driver of my webcam model VF 0050. come some help me to get the drivers. any links to drivers? regards amrit

    See here,
    http://forums.creative.com/creativel...thread.id=7594

Maybe you are looking for