XP Hardware drivers for PXI-8156B

Where can I find the drivers for the PXI-8156B.
I am undating the software to XP.
Thanks
Tony

Tony,
Since the 8156B came out significantly before XP was released, there are not any peripheral drivers specifically for XP. That being said, there are drivers for Win 2K, which may work with XP as well. Here is a link to the driver package on NI's FTP site: 8156B Win 2K Drivers. I hope these help, have a good day!
<-*DrkOvrlord*->

Similar Messages

Need WXP hardware drivers for Satellite L40-139

Hi!
It seems that there are no XP drivers available for the Satellite L40-139.
Could anyone please tell me where I can download drivers for the following devices:
-Satellite L40-139
-Audio device
-Graphics controller
-ACPI controller!
-Some chipset drivers (?) (PCI Subsystem or something)
I should really appreciate any help!
Kind regards!

Hi,
unfortunately there are no drivers available from toshiba at the moment, but you can try using generic drivers from the manufacturers of the hardware
(e.g. if the soundhardware is a realtek soundcard then download drivers from www.realtek.com and so on..) and run the machine with these drivers.
Here are some link which could perhaps help you:
Video drivers
http://www.laptopvideo2go.com/
http://www.omegadrivers.net/
Chipset drivers
http://www.intel.com
Sound drivers
http://www.realtek.com
I hope you can find the drivers you need..
Greets

The minimum required hardware drivers for Satellite L755

The minimum required hardware drivers satellite L755 m1du order by installation
Since the installation of all drivers My laptop is too heavy.
And order Installing the drivers do not know .

I guess you’re asking for common, most essential drivers which you would need to install on this Satellite L755 unit…
Well, in my opinion you need definitely drivers for;
LAN, WLan, chipset, graphic card, touchpad
Other drivers and tools are necessary to control additional notebook devices and features.
If you want to use the notebook with all available and supported features, you should install all drivers and tools available on Toshiba driver website.

Where can I find win2k drivers for pxi 8175?

I am unable to find network and display drivers for the 8175 online. Any help is appreciated.

Hello,
The drivers for the NI 8171 series controllers (8174, 8175, and 8176) can be found at the main PXI support page.
Peripheral Drivers for NI 8171 controller
PXI Support Page
Regards,
Josh Hernstrom
Applications Engineer
National Instruments

Cannot install drivers for PXI-MXI-3

We bought a MXI-3 system for our Acqiris cc103 crate. About 2 months ago, after initial troubles, I managed to install and test the system. Unfortunately, I had to uninstall the PCI card and software because I wasn't using the crate and my computer didn't like the card and software installed without the link to the PXI controller.
Now I want to use the crate again and tried to install the software and hardware. After 3 hours I still have no success. MXI-3 optimise doesn't recognise the crate and the link LED on the PXI controller is off.
I had a look at the device manager and cannot find the PCI-PCI bridge icon, nor any unrecognised hardware and conflicts.
I am running Windows 2000
Please, can you help?

I realize this is kind of late, Erik, but a few suggestions here.
First, power down your PXI chassis, and your PC. Power up the PXI FIRST. Then power up your PC. You *must* do it in this order, or it won't work.
You should see your MXI optimize.
Mark

Drivers for pxi instruments

I'm Looking for information on how to interface the NI pxi instruments with Labwindows/CVI in particular the instrument in question is the 8211 Ethernet and RS232

The 8211 functions exactly like any Ethernet port you will find on a desktop computer. If your PXI controller does not have the driver installed, you can find it here:
http://ni.com/support/vxi/vxi_perph.htm#pxi8210
The same thing applies to the serial ports.
Programming the Ethernet and RS232 ports in CVI will be done the same way you would on any other PC. You may find some examples already written here:
http://ni.com/devzone/dev_exchange/ex_search.htm

Are there DASYLAB 6.00.07 hardware drivers for the NI USB-9215

I'm working with Dasylab 6.00.07. Do you know whether there are allready any hardwaredrivers for the NI USB-9215 ?

At this time, DASYLab only works with NI hardware via the traditional NI-DAQ interface. Any board that is not supported via NI-DAQ will not work with DASYLab V8.
The data sheet for the USB-9215 says:
USB-9211 and USB-9215 devices each come with a ready-to-run
data logger application that acquires and logs up to four channels of
analog data. For more functionality, the NI-DAQmx Base driver
software is a multiplatform driver with a limited NI-DAQmx
programming interface.
This says that it is not supported via NI-DAQ, and is not currently supported by DASYLab.
We are actively working to ensure DASYLab's support for the DAQmx interface - watch for updates of the software!
Please note that new driver support, such as this,
will require an upgrade to the released version of DASYLab. It is not possible to update V7 or earlier with the changes required to fully support DAQmx.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

While using Build App installer, how does one include drivers for hardware

I have a LabView vi and I would like to create an application to be installed on a different computer that also requires a PCI-6503 digital IO card for the purpose. While using Build Application to create the installer, is there a way I can include the necessary hardware drivers for the DIO card?
Thanks.
-Bahadir

Hi Bahadir,
Your request for the option of including specific drivers (in your case NI-DAQmx)
with the installer of your executable is something that is something we have
heard from many customers. With any version of LabVIEW up to 7.1.1, you have
always had to install the drivers separately or in best case by creating your
own *.bat file that defines the installation procedure of the driver.
However, LabVIEW 8 is here for
your rescue! We have listened to our customers and now you have the simple
option of putting a checkmark for the option of the driver you want to be
distributed with your installer. Check these options from the Installer
Provider:
Please read more about the new possibilities with LabVIEW 8 from this tutorial:
Distributing
Applications with the LabVIEW Application Builder
The best part of it all is that you can try it all
(including Application Builder) out by downloading the Evaluation version here:
LabVIEW
8 Evaluation Software Download
Notice that the Evaluation version of LabVIEW 8 is similar
to the Professional Development System, except from a watermark and the fact
that is only runs for 30 days. Everything else is possible!!!
Try out LabVIEW 8 and check out all the other places we have
listened to our customers...
Have fun!
- Philip Courtois, Thinkbot Solutions

Internal hardware drivers needed for HP 2000 Notebook.

Perhaps someone can help me pull a pawn shop "bargain" back from a life of exclusive Linux service. The previous owner had appearantly attempted to retrograde the notebook from Windows 8 to Windows 7 using a Win7 recovery disc and an image of another computer. So of course the entire system, recovery partition and all, were formatted away and replaced with an unauthorized and broken install of Windows. I'm OK running Ubuntu on if for now, but I will eventually want to install a fresh copy of Windows and can't find the internal hardware drivers for my HP 2000 Notebook (product number C2M42UA) anywhere on HP support website. Before wiping away the unauthorized Win7 install I looked at the device manager and remember Realtec HD audio and Intel HD video and have located those drivers elsewhere on the web, but can't be sure what else I'll need. I do seem to recall that with the bad install the ethernet adapter was without a driver, for example.
Where can I find a list of drivers for which to scavange the web? Looks to me as if a hard drive failure will leave any newer HP computer in worse shape since they replaced the recovery discs with a recovery partition on the hard drive it's meant to restore. Something I should keep in mind in future computer shopping.
This question was solved.
View Solution.

Windows 7 driver download page for your model:
http://support.hp.com/us-en/drivers/selfservice/HP-2000-2b00-Notebook-PC-series/5296210/model/530508...
Remember, when you buy a new laptop they do not give you recovery disks. That has been true for many years. However, there is a Recovery manager that will let you make those disks and if you do that and store them in a safe place you are always able to recover your system. Windows itself also now has very good backup tools including the ability to make a complete system image of the computer in its current state (not factory condition) so there is no real reason you cannot be fully protected against a hard drive crash.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Need MacBook Pro MD103LL/A Drivers for Windows 7, Need MacBook Pro MD103LL/A Drivers for Windows 7

Hi I have 15" MacBook Pro, Core i7 , NVidia 650 GT M.
I am installing windows 7 on it now I need its drivers. I am not using boot camp because its so slow and i have waited for 6 hrs but it didnt fully download the drivers so it bothered me and I just closed it .
Now is there someone who can refer me to some site where i can download Hardware Drivers for my MAC Book Pro Manually plzz?
I need it
I dont wanna use Boot Camp plz.

No, I am not using it virtually, Its installed saperately . Actually From BootCamp i just Installed Windows and unchecked other Driver and support downloading options because they were taking so much time to download the drivers. Now Windows 7 is installed. Now I again switched to MAC and tried to download the drivers from Boot Camp (Just the Drivers) so that i will write those drivers to My USB and will Install them after rebooting into Windows. But I spent 6 hours and couldnt download the drivers because boot camp took alot of time for downloading them. I just closed it. So thats y I am asking is there a way i can download drivers for my Hardware on by one manually from any website ?

Need Vista 64-bit drivers for Satellite Pro P100

Hello,
I have one question about Drivers for Vista 64bit version. I have a notebook Satellite Pro P100 and search in the drivers catalogue and find only a BIOS update for 64-bit systems.
But where can I find the Hardware drivers for 64-bit versions?
Regards
Mischa

The 4 GB RAM issue is a known issue at the toshiba helpdesk (yes I had it and called) it's due to a problem programming the BIOS to handle more then 3GB.
As for your drivers I can tell you in advance you can find everything except SD Card driver and the microphone jack in plug support driver.
I'm sorry I forgot where I found those but the rest is out there (you can also try installing 32-bit version for the most).
Ow and the BIOS - update for 64 bit doesn't work for me so don't count on it to much lol

XP drivers for AMD 6750M graphics

Has anybody managed to obtain an XP driver for an AMD 6750M on a new i mac?
Help appreciated.

Have you tried installing XP and see if it will at least install a "Generic" set of video drivers?
Does XP install at all?
Do the 3rd party files just not install the drivers in XP?
The biggest problem would be the Apple drivers on the newer Apple install disk will only have W7 capable drivers for you hardware, and if you use a 10.6.x disk it might not have the hardware drivers for the newer hardware?
You might be able to download a video driver from another company but will XP see the other newer hardware in the iMac?
This?
http://support.amd.com/us/gpudownload/windows/previous/Pages/radeonaiw_xp.aspx
The descriptions do say XP. These also can install just the video drivers individually instead of the whole package.

HP Envy m6-1203ex notebook Drivers for windows7 (32 Bit)

I have downgraee my laptop hp Envy m6-1203ex from Win8 to Windows7 (32Bit), I already installed successfully Win7 (32Bit), I need hardware drivers for windows7 (32Bit), I checked on google but did not get it. Please advise accordingly.
This question was solved.
View Solution.

Hi:
There is no W7 32 bit switchable graphics driver for that configuration from anywhere.
Your only choice if you want to succesfully run W7, is to install W7 x64, and then you can use the drivers and software from the m6t-1000 except the BIOS and firmware files.
http://support.hp.com/us-en/product/HP-Pavilion-m6-1000-Entertainment-Notebook-PC-series/5259226/mod...

Ehternet XP drivers for new Macs

Hi, can anyone tell me where I can find out what make/model the network cards on the latest range of Macs are please? (I know the drivers are on the OS X DVD, but I need the .ini/.inf files not the .exe)
I know they used to be Yukon/Marvel/Broadcom... but which ones, and how can I get the actual driver files (again, not the .exe/setup etc)
Thanks

Have you tried installing XP and see if it will at least install a "Generic" set of video drivers?
Does XP install at all?
Do the 3rd party files just not install the drivers in XP?
The biggest problem would be the Apple drivers on the newer Apple install disk will only have W7 capable drivers for you hardware, and if you use a 10.6.x disk it might not have the hardware drivers for the newer hardware?
You might be able to download a video driver from another company but will XP see the other newer hardware in the iMac?
This?
http://support.amd.com/us/gpudownload/windows/previous/Pages/radeonaiw_xp.aspx
The descriptions do say XP. These also can install just the video drivers individually instead of the whole package.

Clearing out duplicate drivers for a specific Hardware ID

I've been struggling for a while to get a driver that works for an old model of network card. I had added in various drivers from the vendors website, and now the hardware vendor has supplied me with an older version of the driver that they expect will work.
Now, I would like to find all the drivers for a specific hardware ID in MDT and clear them out, and then add in the one that I have from the vendor.
What's the best way to do this, please?
One option that I found was this script which highlighted duplicate or superseded drivers for MDT - but the script is now longer available from the link in the article and I can't find copies of it with google. Would anyone know of anything similar?
http://xtremeconsulting.com/blog/duplicate-driver-tool/
Of course, if there's an easier way to do it, that would be even better!

I have encountered several people complaining about the tool not working.
USe at your own risk: :)
https://onedrive.live.com/redir?resid=5407B03614346A99%21442
When MDT opens drivers that it *knows* are dupes due to identical CRC checksums, it will postfix a "(1)" to the directory/name. I would start looking at these first.
Keith Garner - keithga.wordpress.com

XP Hardware drivers for PXI-8156B

Similar Messages

Maybe you are looking for