XP Machine wont start after 8310 Software install

Sorry if this has been covered before - but I installed the desktop software that came with my BB 8310 Curve and now my system wont start. It gets to the Window Splash screen (the windows logo and the bar accross the bottom that runs accross the screen) and then resets. This happens in regular startup, last Known good config, safe mode with network, safe mode. Windows will not load.
Windows XP
SP2
2 Gig ram
500 Gig HD
(powerfull machine - expect softare corrupted registry)
Any suggestions before I do a rerinstall of windws to get machine to load OS
Many thanks
-John-

Do you know what version it was you installed?
I would start with a clean uninstall of that Desktop Manager software (that is what you installed?). See this link for instructions:
http://www.blackberryforums.com/rim-software/25937-how-perform-clean-uninstall-reinstall-blackberry-...
Then, I would recommend downloading and installing Desktop Manager verions 4.6 from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Persoanlly, I would recommend the version you find there withOUT the Media Manager software.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Safari wont start after Leopard software update

After updating Leopard to 10.5.7, Safari wont start. I get an error message "Cant load Tastyapps AV plugin." or something to that effect.
What gives? anyone know?

I was using Videobox as a trial version (on the site you have the option of buying or trying for 30 days). After the 30 days it stopped working and I just moved it to the trash. I seems to have left something in Safari however that causes it to not want to start.
Using Firefox i was able to go back to the Videobox site and download and install the trial version again. I was then given the option of installing the Safari plug in which i did. I then went to the Videobox menu and clicked on uninstall Safari plugin. and then i just moved videobox to the trash again using AppCleaner.
So, you should be able to do the same thing. Just click on "download" instead of "buy" on the Videobox site. I'm sorry, I couldnt find the plugin files for manual deletion either.
Maybe you should start a new thread and someone will know how to do that.
Thanks!

FCP S2 wont start after archive and instal.... Please help

Hi I have been on the imac forum with the first half of this problem. Ill start from the beginning to give you some background.
I did a routine apple software update and when restarting my computer it got stuck on the blue screen and would go no further. After trying everything I had to do an Archive and Instal. This worked and I can now fully boot up.
However, after this process my FCP S2 will not work. When I click on any of the FCP S2 icons, they bounce and nothing else happens. It does not matter if I do this from the apps folder or on the desk top. The strange thing is that DVD Studio will open and works like normal.
Is there anything I can do to get my FCP S2 programs to work again and if not how should I go about reinstalling so I will not lose all my projects. What is the proper procedure for deletion and reinstallation.
Thanks so much for your time

The Previous System folder is just a folder. OS X just treats it like any other folder, so Final Cut Studio isn't technically installed. You don't need to necessarily remove it, although the purpose of performing an Archive and Install is so that you can retrieve files from the Previous System folder before removing it permanently.

CF Mx6 admin & service wont start after successful new install on XP with IIS

I just installed a fresh copy of Coldfusion mx 6 on my
windows XP running IIS . After installation, the CF Administrator
didnt come up(
Http://Localhost:8500/CFDIE/Adminstartor.....whatever)-
loads on the browser but doesnt load the admin page.
Further attempts to manually restart the coldfusion server
from Control Panel>Adminstrative tools>services> prooved
abortive as it refused to start.
Please can anyone help me out there?
What aint I doing right?

thanks for reply
but my firewall is not on and the coldfusion server service
aint starting whiles the other two services(ODBC etc) are running
smooth.
cant afford to mess up my internet connection settings cos
it would warrant paying a visit to my ISP office with my PC . its a
mobile CDMA wireless box.
pls help or i ll drop CFM for PHP
chow

My labtop wont start after a clean install Maverics ?

Hi all,
I was clean install Mavericks on external 16GB flash stick, but during the installation I accidentally push the stick and the download installation interrupted. I had to reset my computer but when doing so I got that apple logo turning to differnt logos and it could not start up my laptop?
Any help please??
thanks

Thanks mende1 for the welcoming... can this completely format my hard disk? i really want to wipe clean it before installing Mavericks?!
Thanks
mende1 wrote:
Welcome to Apple Support Communities
Hold Command and R keys while your Mac is starting to start up in OS X Recovery, and install OS X again on the external drive.
To start up in the internal disk, hold the Option (Alt) key while your Mac is starting up and select the OS X volume

SSMS wont start after Installing SQLServer

Hello,
After SSMS wont start after updating VS2012. I have unistallled and installed a number of times but the error message I keep getting indicates that Visual Studio shell Isolated is missing. I have tried to install this directly from the set up dvd but
no success.
Also I noticed that VSShell is missing in the C:\Program Files (x86)\Microsoft SQL Server\120\Tools\Binn.
I am assuming that this has something to do with it.
Can someone please tell me how to fix this?
Thank you.
here is the error message received

Hi,
Try the below solution and see how it works.
Note: Take a backup of the key before make any changes on the registry keys.
http://support.microsoft.com/kb/322756
Start regedit.exe
Go to HKEY_CURRENT_USER\Software\Microsoft\SQL Server Management Studio
Delete 12.0_Config
Restart ssms.exe
Here is the original thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/aeff13b3-3960-4724-bb9a-7e585651d7f4/sql-server-2012-error
Thanks.
Tracy Cai
TechNet Community Support

Safari wont start after i installed avi player any suggestions?

safari wont start after i installed a avi player any suggestions?

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Firefox wont start after 1st install session.

Some time ago firefox updated, after update it crashed on startup when checking add on compatibility. After this crash it never started again.
I uninstalled and re installed and it started fine after install, but when i close it and try to open again it doesn't start. The process is there and stuck at 13 cpu usage with memory usage around 15k.
Every time it starts after the initial install it says "The bookmarks and history system will not be functional because firefox is being used by another application" i have no idea what may be using it, microsoft security essentials is the closest thing to anti vir installed.
I uninstalled and reinstalled multiple times, deleting all files including registry files but its the same issue, for the past few months i've been using Chrome and now after months of torture i want my Firefox back! Help!

* Start Firefox in Safe Mode by Holding down the SHIFT key while starting Firefox
* As an alternative method, select "Start -> Run" and enter one of the following in the Windows Run box:
** firefox -safe-mode
** "C:\Program Files\Mozilla Firefox\firefox.exe" -safe-mode
-> Firefox Safe Mode window will appear -> DON'T SELECT ANY OPTIONS, just click '''Continue in Safe Mode'''
-> Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Time machine wont start?

Time machine wont start in my computer after I double click on the icon. There is no error message -- seems to ignore me completely.
Any tools to find out what is going on?

Not sure what happened, but re-booting fixed the problem.

Intel imac wont start after changing permission

intel imac wont start after i changed my hard drive permission to let me read and write, then i clicked apply to all enclosed files.i turned it off no problem. then it never started up again in os x. the grey screen with apple logo appears,then after a minute it restarts, and will keep doing that if i let it. i can start up in windows xp, but i dont know how to do anything in windows xp that will affect os x. i can use the hard drive in target mode, but i cant figure out how that can help me. i use a macbook to view target disk. ive spent hours looking through help and support. finally i do not have the os install disks. PLEASE HELP!

My apologies for the inept instructions.
Restart normally. Open Terminal in the Utilities folder. Paste the commands in the Terminal application to avoid typos:
sudo su
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen. Press RETURN again. Now paste each of the following at the prompt and press RETURN after each.
chown root:admin /Applications
chmod 0775 /Applications
chown root:admin /Library
chmod 1775 /Library
chown root:admin /System
chmod 0775 /System
chown root:admin /Users
chmod 0775 /Users
chmod -R -N /Applications
chown -R :admin /Applications/*
Again, my apologies.

770-G45 wont start after ShutDown

Recently installed MSI 770-G45, problem starts when i regulary shutdown comp. from WinXP or Win7 64-bit.Computer wont start after that, like ther is no power, fans dont spin, no bips, NOTHING. I got to unplug power cord and plugg it again into psu, after that it starts normaly.
Strange thing is that computer starts normally when i manualy shutdown system(holding the power button on the case).There is no exception, starts perfectly evry time after manual shutdown, no need to unplugg powercord.
Rest of my components> Phenom II X2 555BE, Kingston 2GB 1333mhz, Sapphire 5770, HDD WD 250gb,PSU Corsair TX 650w.
Tried to change power cord, tried other PSU, other case (tought its maybe power button but no), changed mobo battery, installed several OS versions (XP, Win7) and still dont have solution.
MS 7599 ver. 2.0
Bios version 10.2
MoBo is new bought it 3 days ago.
PLEASE HELP!!!!!

First: It is important to clear CMOS after a BIOS update. Unplug power cable before the clearing, as there can be no power in the system
Second: Rebuild the system, but outside the case. Use only PSU, motherboard, processor, one stick of memory and graphics card. If it works better then, you may have a short, from a stand-off too many, or poorly isolated wire somewhere.
But I second it sounds like a motherboard problem. You'd better contact the one who sold it to you.
Oh, an oldie thing! You will need to install Windows again, with the new motherboard and all.

My System wont start after setting FSB to 200

My System wont start after I'd set my FSB to 200,
when the system starts, nothing comes up, and my Pc screen LED just blinks,
I have tryed to reseting the Bios but it doesn't help, have also tryed with new RAM and new Graphiccard but it doesnt help.
Please help me:-(
Am I resetting the Bios wrong? I set the jumper to safe mode and 100mhz, then I use the jumper to clear the CMOS. And the restart at set the jumpers back
3ghz AMD BARTON
NVIDIA nforce2 k7bn2 Delta
512 DDR RAM PCI3200
300WATT

Quote
Originally posted by roobster
set the multiplier lower , FSB(200) X multiplier (ex.10.5) = 2100 MHz , and your voltage raise it a bit too let say 1,700 ( default is 1.650 ) If this doesn't work at once , keep booting . My rig started up after 5 times . Strange but true .
does not work if he has a 3000.
they are multiplier locked.

Portege Z930-118 wont start after BIOS update

my PORTG Z930-118 failover and wont start after i upgrading in middle of upgrade i remove power and press shutdown bottom after that i see the power and wireless but screen still black ?
Any help please

Hmmmm.... BIOS upgrade interruption has screwed up BIOS and thats the reason why your notebook doesn't start properly. BIOS is damaged now.
In such case you need professional help by authorized Toshiba service provider.
On this forum you can find many threads about similar problems. Some people have tried to fix this alone and if you are interested to read how one other forum user has fixed it check please this thread.
Ayway, you can contact nearest Toshiba service, explain the situation and ask for help.

Z1 wont start after stick firmware was installed

I had some problems with the current version of my Xperia Z1 and decided that I needed to install the stock firmware. I downloaded the standard and advised Flashtools and installed the stock firmware. After attempting to turn the phone on, the following screens appeared. The "Sony" logo appears, then the "Xperia" logo appears, and then the swirly ribbons move from left to right on the screen, and suddenly they stop moving and it goes back to the "Sony" logo screen and the entire process repeats. I don't really know what to do now, either to install a different firmware or maybe is there a program that resets the phone by simply connecting it to the USB. The problem is, the phone wont start. Help will be highly appriciated.

Download SUS:
http://www.sonymobile.com/gb/tools/update-service/
Charge the phone for at least 2 hours,repair with SUS.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Sync Wont Start after installing iOS 7.1.1

My iPhone 4S won't sync with iTunes after I have installed the new iOS 7.1.1.
Help please.
Thanks!

I was limited for time this morning.
I am going to do more troubleshooting when I get home. I am running 10.9.2 completely up to date on all software.
If I get a resolution, I'll post
<Edited by Host>

XP Machine wont start after 8310 Software install

Similar Messages

Maybe you are looking for