XP Message: "System temperatur abnormal"
HI,
i got a problem, for the secound time now, while i was playing a round cs, i am suddenly back at the desktop and a Message ist displayed:
System Temperatur abnormal
Shutting down windows (XP)
accept abort
I have:
- Msi K8N Neo p.
- Clawhammer 3400 CG at stock (201x11=2210mhz)
- Zalman cnps 7000A-cu @ 2700rpm (Mountet on stock backplate and that damn plastik thing on the other sind too fix the cooler. should i change to the zalman backplate and remove the plastic for takin the zalman stuff????)
- Corsair twinx 1024 3200xl @ auto --> 1T 2-2-5-2 (non auto Biossettings gets feezin on benches)
- Tagan 480 Watt PSU
Core Center:
cputemp = 43'C load(54)
Systemtemp = 44'C load(53) this is the NB i think
NBtemp = N/A (???)
Bios Temp:
cpu: 49'C
System: 49'C
So, the NB is way too hot, but not the System (is that a problem off the Bios?)
Is that Message from the Core Center or from Win XP or ...
What schould i do?
Greetings Tommigotchi
the temps (alarm)limit in corecenter are set to 61 cpu and 61 System. So the CC schould not be the problem.
53 for the System (NB) is hot, but not so hot that it schould be a Problem, right?
So why the Shutdown because off "abnormal" ? system temp???
(I thought MSi said that the NB with no fan is no prob in the Neo P.)
Similar Messages
-
hello
I am running an interface RFC2WS sync and recieve this message in the RFC. the message does not get out of the XI and rich the target (WS).
the XI been upgraded lately, and I think this might be the cuase to the problem, becuase the interface been worked before, and still working in PROD environment as is.
what could be the problem and how can I start investigate it to find the problem?
this is what the SAP recieves
call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException
Thanks
KfirHi Kfir,
just check in RWB, in component monitoring, the status of integration server and adapter engine.......if it is red, then ask your basis guys to remove that error................just check your comm channels, i think your comm channels are in error, if they are just edit them, save and activate them again..........i think then your this issue will be resolved.'
Regards,
Rajeev Gupta -
Hello XI guru,
I am configuring RFC to File scneario where i am using BAPI as Source. When i run this BAPI in se37 it gives me short dump stating "call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException:
Please help.
Also I want to know is it necessary to write wrapper for BAPI before configuring. This bapi list all orders created in SCM system.
awaiting ur advises and help
Thanx
AnuHello guys,
I am sorry but kind of confuse, please be with me.
I have RFC with following structure:
'Z_BAPI_MOSRVAPS_GETLIST2'
importing parameters
LOGICAL_SYSTEM = T_LOGICAL_SYSTEM
START_TIME = T_START_TIME
TABLES
PRODUCT_SELECTION = T_PRODUCT_SELECTION
LOCATION_SELECTION = T_LOCATION_SELECTION
LOCTYPE_SELECTION = T_LOCTYPE_SELECTION
ORDER_HEADS = T_ORDER_HEADS
OUTPUT_NODES = T_OUTPUT_NODES.
I put values in logical system/start_time/
product_selection/location_selection/loctype_selection
based on these values order_heads and output_nodes is populated. I want value of these to tables to be sent as file.
Data structure for file is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
- <ORDER_HEADS>
- <ITEM>
<ORDER_NUMBER />
<ORDER_TYPE />
</ITEM>
</ORDER_HEADS>
- <OUTPUT_NODES>
- <ITEM>
<MASTER_PRODUCT />
<MASTER_PLANT />
</ITEM>
</OUTPUT_NODES>
</ns0:ORDER_MT>
But the payload has value
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
remaining is not seen in sxmb_moni and payload cannot be read error is given.
file structure is dummy structure, please tell me know if it is right or i need to change.
Thanx
Anu -
MR11 error message system status CLSD is active
MR11 fails with error message system status CLSD is active . How to clear the PO line item which gives error message in MR11 system status CLSD is active .
If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
Check and reverse the status. -
Error in local message system; message 009999000035 not complete
Hello All.
I have configured Service desk in SolMan 7.0 which has patch level 14 and also configured in Satellite systems. I am using SM_...._BACK RFC connection in BCOS_CUST table. The user used by SM_...._BACK have the following roles in SolMan
SAP_SUPPDESK_CREATE,SAP_SV_FDB_NOTIF_BC_ADMIN
and SAP_SV_FDB_NOTIF_BC_CREATE.
However, when I try to create support message (Help --> Create support message) in satellite system, i am getting Error in local message system; message 009999000035 not complete.
I have also checked for Product_ID parameter which is not existing.
One important thing is, I can create support message in satellite system if I give SAP_ALL in that RFC user using in SM_...._BACK connection in SolMan.
So, this shows clearly that it is an issue with role/authorization.
Please suggest me !!
Thanks in advance.
Regards,
Satish.Hmm not really. Profiles for the roles are also generated?
Those roles/profiles should be sufficient to create support messages.
Even though you assigned SAP_ALL and it worked afterwards I cannot imagine you got an auth. problem here anymore.
When assigning SAP_ALL did you really assign SAP_ALL to the RFC user or did you assign another user (who got SAP_ALL auth.) to the RFC connection?
The user who was logged on to the satellite system when the support messages have been created (with and without SAP_ALL assigned to the RFC user) has always been the same?
Just to make sure: did you set NO_USER_CHECK = X in Sol Man tx: DNO_CUST04? -
Service Desk: Error in local message system: You do not have authorization
Hello experts,
i'm configuring support desk scenario. I think all is fine, but, when i try to create a message from satellite (R3 46C) to my SOLMAN the following error appears:
Error in local message system: You do not have authorization to create a notifica Message was not created. (Message no. B~ 088)
The user i use to create the message has the following roles:
SAP_SV_FDB_SUPPORT_LINE_ADMIN
SAP_SV_FDB_SUPPORT_LINE_LEVEL1
SAP_SV_FDB_SUPPORT_LINE_LEVEL2
Z_RFC
and SAP_ALL SAP_NEW profiles.
Anyone knows where is the problem?
Regards
Carlos CalleHi Carlos,
Role that allows processing messages is SAP_SUPPDESK_PROCESS. However from what I have understand, once End User enters and submits the message, he/she cannot edit the message anymore. Probably an email will be generated to him/her to notified of the message creation and for futher updates. I think end user should not be required to logon to Solution Manager. Key User i.e. helpdesk or SAP support staff will process(edit/change) the message instead.
If you want something else, I think you need to create a customise role maybe from SAP_SUPPDESK_DISPLAY or PROCESS and change the authorization values.
The below note contains latest authorization info.
Note 834534 - SAP Solution Manager roles in Release 4.0
Experts,
Correct me if I am wrong.
Regards,
Annie -
Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide SolutionHi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change................. -
Error in Local Message System: RFC destination MB3AP1039 does not exist.
Error in Local Message System: RFC destination MB3AP1039 does not exist. Message was Not Created
Message no. BCOS088
Hi,
When iam creating a message from any system from HELP-CREATE SUPPORT MESSAGE it is throwing the above error message. Actually i need to send this message to SAP solution Manager Service Desk.
Can anyone help me in resolving the above issue.
Thanks & Regards,
Mirza Kaleemulla Baig.Dear friend
You have to of following option
1.Define Service Desk destination in the R/3 systems:
Note: for this you need to log in the R/3 system.
Create the RFC between the Solution manager and R/3 system (Login to the R/3 system)
2.a. Go to transaction SM30.
b. In table/view field, enter BCOS_CUST. Then press the Maintain Button. See example below:
c. Press the Continue button in the following screen:
d. You should see the following screen, no entries should be seen in the table. Press the New Entries button:
e. In the next screen, enter the following information:
In the RFC Destination you should point to your Solution Manager destination RFC.
0ss_msg w sm_bsmclnt_back cust620 1.0
shailesh -
Workflow Error Message: System Account - The Workflow could not set Content Approval Status
This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
When I start the work flow the following 3 error messages show up:
Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Thank you for your kind guidance.Hi,
For the first error: Did you set Content Approval in the workflow? If so, see if you have it in the versioning settings of the list settings.
For the second error: double check your recipient is set up as being valid. Did you type in the email address or is it referring to a people picker field? also, make sure that in the workflow for the email that you actually populated it in the
To: field.
for the third error: I suspect that either your farm is not configured for email. Or, this error is a knock on from the second error. If you get the second error rectified it may clear this error. If not then double check the email settings
for your farm.
Johnathan Lightfoot -
Error in Local Message System: RFC destination 10.189.98.10 does not exist. Message was Not Created
Message no. BCOS088
Hi,
When iam going inside the tcode SM30 in the satellite system and entering the destination ip of solution manager system and after that when iam creating a message from HELP-CREATE SUPPORT MESSAGE, then it is throwing the following error.
Can anyone please help me in the above issue.
Regards,
Mirza Kaleemulla Baig.Hi Mirza,
For the RFC destination don't enter the IP address,enter the RFC name,somthing like SM_SP1CLNT200_BACK which is maintained in sm59.
Revert for any clarifications.
Thanks and Regards,
Avinash. -
I ran an iTunes update. It failed with the message "System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem." I tried reinstalling but get the same message. I looked in my Recycle Bin for that file name but there is none there. Is this a new file that iTunes wants?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683) -
I have this error message:
System extension cannot be used
The system extension “/System/Library/Extensions/AppleACPIPlatform.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
Please help. Is there a update or how do I reinstall?
Thanks,
JohnI submitted the above question, later finding that it has been answered by Buller already. No one need reply as Buller's answer seems to solve the problem for others, and I'll try that.
Jim -
HTTP_TRANSMISSION_ERROR in XI Messaging System
Hi again,
Just to give a backgrouond, I'm currently running into issues when we try to send data from an Enterprise Portal (GGX) box to XI via J2EE MEssaging System we're receiving this error:
Message ID 7e203580-501c-11de-a4ea-001560deb814
RefToMsg ID
Conversation ID
Serialization Context
Sequence Number 0
Message Type Asynchronously Sent Message (SEND)
From Party
From Service Name: GGX
To Party
To Service
Action Namespace http://sap.com/xi/GDS Name: MI_TradeItemExport_Out
Connection Name JPR
Status Not Delivered
Error Category XI_J2EE_MESSAGING_SYSTEM
Error Code HTTP_TRANSMISSION_ERROR
Profile XI
Transport HTTP
Delivery Semantics Exactly Once
Times Failed 4
Number of Retries 3
Sent / Received 06/03/2009 04:57:01
Transmitted / Delivered 06/03/2009 05:12:03
Next Delivery 06/03/2009 05:12:03
Persist Until 07/03/2009 04:57:01
Valid Until 06/03/2009 06:20:20
Retry Interval 5 Minutes
Address http://localhost:50080/sap/xi/engine?type=entry
Credential SAPPasswordCredential(XIAFUSER):password=********:sapclient=100:saplang=de
Transport Headers Content-Length=7503 Content-Type=multipart/related; boundary=SAP_8086fc50-501c-11de-cdc4-001560deb814_END; type="text/xml"; start="" HTTP=POST
Principal Propagation
Message Version Number 0
Node ID 37391650
I'm not sure whether this is a basic question or something that is obvious (do apologize if ever). As this is new to me, just have a few questions:
1. Would you know what are the possible causes of this error?
2. Would you know what are some possible solutions for this?
3. Would anyone know where and how to modify / configure this?
Thanks a lot!Goto sxmb_adm -> Integration Engine Configuration. Check the URL there. Is it same as the URL you see in your error? You should not have port as 5xxxx. It should be 8xxx. This port number could be seen in tcode smicm -> Goto -> Services. Change it and try again.
Regards,
Prateek -
Error in Local Message System: Error when opening an RFC connection Message
Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner "local:sapgw00' not reached
Error Details LOCATION: SAP-Gateway on host local / sapgw05
Error Details DETAIL: NiPConnect2
Error Details CALL: connect
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 40142
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 2835
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Wed Jan 11 23:26:54 2012
Error Details VERSION: 38
Kindly Help.....Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj -
Error in Local Message System: Partner function RP is not defined
Hi Team,
I have configured Service Desk in solution manager 4.0 and When I create message from Development server I am able to see in Solution manager. Every thing works fine in Developement server.But in Quality i am not able to create mesage.
I have maintained BCOS_CUST table and defind BACK RFC (SM_SRSCLNT100_BACK)in quality server but When I try to create mesage using Help--> Cretae Support message I am getting error message as " Error in Local Message System: Partner function RP is not defined for notificatio Message was Not Created"
and not able to create message from Quality server.
Please let me know solution to fix this isssue.
Thanks in advance
Regards
VenuHi Venu,
This can be related to a configuration on table ( DNOC_USERCFGT ). You can use SM30 or go through IMG (
SAP Solution Manager -> Scenario specific settings -> service desk -> Partner Determination Procedure -> Use of own partner functions )
The parameter NO_USER_CHECK has to be set to 1 which means : No Existence Check for User.
Other point you need to check is wheater the user you are logged on in the QAS has the external identification correctly maintained in the respective BP on the Solution Manager side.
Regards,
Valdecir
Maybe you are looking for
-
How to run a procedure before executing the report in BI Publisher
Dear All, I got a requirement when I should execute a procedure before running the report. Here is my requirement I have created a temp table and created a stored procedure (temp_proc) which will insert sysdate value. create table temp (emp_name varc
-
Export puzzle--food for thought.
Hi, I used to use FCE 2 on Panther and made a movie and used the export feature to make a DVD. I used "Export to QuickTime Movie" and made the thing self contained. After lots of time and upgrades (FCEHD 3.5.1, OS X Leopard, a new hard drive, etc,) I
-
Dimming Display Brightness to Zero
Hello All, I have been having a problem with the display brightness adjustment for a long time. Basically, the display of my 17" 1GHz G4 cannot be dimmed to black. From the System Preferences the display brightness can be lowered with the slider. In
-
Oracle Application Server startup problem
We have inplemented OF 11.0.3 at our org. We upgrade our server fromsingle to dual processor now when we restat the services web server is not getting started, we tried it through cmd prompt with the help of owsctl but still it is not working.Can we
-
IPhone strange reset when in e-mail client
Since the update for the iPhone 2 weeks ago, the iPhone has a strage reset when I am deleting or sending e-mail. The screen goes black, and within 10 seconds or so it goes to Home. When I go back into mail, all the e-mails I deleted reappear, while e