XP-Mode in Windows 7 (64) and also Registration refused

I also have the will not register issue posted below. Is this registration issue caused by installing network magic in the virtual machine "XP mode" (by Microsoft) ? Which is the preferred installation position for NM... XP mode or windows 7 (64)

The use of windows 7 compatability utility corrected the problem that was preventing registration. Now registered OK.

Similar Messages

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

How to stop booting windows in recovery mode (for windows 2008 and 2012 editions)

Hi ,
we are configure hyper-v cluster contain about 100 VM , if a host is down (unplanned failover ) its VM restarted but in the recovery mode on another hosts.
pls tell me How to disable booting in recovery mode ?
thanks,
Ramy Shaker

These two should sort it.
bcdedit /set {default} recoveryenabled No
bcdedit /set {default} bootstatuspolicy ignoreallfailures
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Installed recent Windows updates and now iTunes refuses to run

I installed the most recent Windows 7 updates:
- Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2467174)
- Windows Internet Explorer 9 for Windows 7 for x64-based Systems
- Security Update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2467175)
Ever since then, I have been unable to open iTunes. It will start up the iTunes process and before the window even comes up it quits. I have tried following some of the guides on the "Troubleshooting unexpected quits, freezes, or launch issues" folder in the iTunes Support section of the iTunes website. I've tried the msconfig thing but no luck. From what I see, there's nothing else that's changed with my computer other than the updates.
I really have no idea what to do. Can anyone help?

Also, seems like Quicktime isn't running. I didn't get an error message either.
many thanks! That suggests a possibility that would also be consistent with this cropping up after those particular updates.
In recent times, the error-message-free iTunes and QuickTime launch failures have been indicating that another application has stashed old QuickTime componentry in your system files. (Those sorts of applications often use the Visual C++ runtimes to keep track of the componentry, so it seems consistent that an update to those could cause the symptoms to flare up on a PC.)
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit Windows 7, open the "System32" folder.
If you have a 64-bit Windows 7, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

I installed windows 7 recently and also Adobre reader XI, and now I cannot open any of my previously created pdfs. Every time I get the message: Error opening the file. Access denied. What is going on?

Recently I had to install windows 7 in my notebook because XP doesn't have more support. Before installing I backed up all my files to my external HD. Now that I instaleed windows 7 and also installed Acrobat Reader XI, I just cannot open any of my pdf files created prior to installing windows 7.
Looking for help online, I found the solution of security and giving me access as an administrator to all my files, but it still keeps the same...
Can some one please help me out?? I really need to work on many of this files ASAP.
Thank you all in advance for you attention,
Best,
Henrique

Can you start Adobe Reader?

Will Let's Edit run on Windows XP mode in Windows 7?

I just purchsed an iMac and I want to load Windows 7 Professional onto it as well. We own the full version of Edius 5 but have not tried learning that program yet. I don't know if Edius 5 will run on Windows 7 but if I can still use Let's Edit I'll be in business for now. I read some information on running Windows XP mode on Windows 7 and I see that a special processer is needed in order to run this. Do you have any idea if my new iMac will support the Windows XP mode? Any help you can provide me will be extremely benefecial to me.
Also, where and how can i acquire the legacy OCHI firewire driver for my video card? As i mentioned, this will be on a new model iMac so will I still need this driver to be installed seperately? Why is it that the default driver installed by Windows 7 will not allow me to capture or output video?
What I am trying to ultimately avoid at this point is having to load an outdated Windows XP OS onto my brand new iMac that utilizes 64 bit hardware and software. I will greatly appreciate any further help you can provide me.
Thanks,
Nick

Some basics.
VMs are virtual machines. They run inside or under or side by side (same thing, just what people call it) and your Mac will run Windows and this application just peachy - perfect for anything except games.
Running Windows as Windows is also called running Windows natively (directly on the hardware, versus running in one of those VMs), is also called a dual boot: boot Mac OS -- or you boot Windows.
VMware Fusion: Install Windows via Boot CAmp (native, on its own hardware), but / and, you can also then use Fusion (which is a VM) inside Mac OS when you want; or, you can boot and run Windows natively.
XP Mode requires hardware virtualization to be enabled in the system board bios (that is EFI or actually UEFI, that Macs use). On a PC you have to enable it in BIOS as it is off by default usually.
It 'should' be enabled. Separate from 64-bit hardware. And separate from your UEFI firmware which is also 64-bit. But the Mac Pro found itself with VT-d off after an Apple Security Update. Go figure.
XP Mode is really just hardware VM. And using Sun (now Oracle) VirtualBox VM (free) is easy.
A VM just does not benefit from 64-bit, unless you need to allocate say 4-6GB RAM in your VM, and your app definitely does not.
Pro version is what MS sells or offers to education institutions.
Is needed for more backup options, XP Mode, dual processor (Mac Pro).
Download and play with VirtualBox and Windows 7 Pro 32-bit.
I have Pro and Ultimate on two systems.

I cannot access the Virtual Computer XP Mode in Windows 7

I cannot access the Virtual Computer XP Mode in Windows 7 and I have very important information that I cannot access. Can you help me?

Have you installed XP Mode correctly?
Install and use Windows XP Mode in Windows 7
See also:
Windows Virtual PC Networking and Using Windows XP Mode
S.Sengupta, Windows Entertainment and Connected Home MVP

Two internal hd in macbook pro, run windows 7 and storage on optical bay hd

Hi, I've yet to do this, but I would like to put a 1tb hdd where the optical drive is. Ideally I want the ssd, which is currently where the hard drive normally is, to have osx on it, and the optical hdd to have Windows 7, and also be used for os x storage of photos, files etc.
Now my idea is that I take out my current ssd, put in the 1tb hdd, then, whilst it is in the original hard drive place, put windows 7 onto it with a partition of say 250gb, leaving the 750gb for storage for the osx. After doing this take hdd out, put into the optical drive bay, and return my ssd back into the original hard drive slot of my macbook pro.
Will this work, and then when I'm in os x mode, will I have a 750gb hard drive show up on my desktop for storage. Also will I then, on start up be able to choose if I want to log into os x of the ssd, or windows 7 of the 250gb (partitioned 1tb) hdd ???

That's up to you. You'll have an OS X volume on the HD, but you don't necessarily have to have the OS on it. I do, because I consider it useful if I want to experiment or if I have a problem with the SSD. My first SSD was an Intel, which did fail. Because I had a copy of the OS on the HD, I was able to keep running.

Hotsync problem with Windows 7 and Outlook 2007

Hello,
I try to make contact between my Palm Tungsten E2 and outlook 2007 on my laptop with Windows 7 for synchronizing.Before this, I worked on this laptop with Windows Vista and also Outlook 2007.I installed the standard software and after that the update for outlook 2007 (palmoutlook2007conduits.zip (7.2MB)).In Vista this was working well, but not in Windows 7.I can see in the soft ware part that palmoutlook2007conduits is installed, but the in the log book I still have the same errors :
- Not Synchronized
Outlook Contacts synchronization failed
When I go to the settings, also there is the same error : “This version of Outlook is not supported by the Outlook Conduit application. Supported outlook versions are Outlook 98, 200, XP(2002) and 2003.”. It looks like the upgrade with palmoutlook2007conduits have no effect in Windows 7.
I hope someone have a solutions for this problem.
Post relates to: Tungsten E2
Post relates to: Tungsten E2

My new computer came with Windows 7 64-bit, and I need to HotSync my Tungsten E2 with Outlook 2007. Did anyone find a way to do this?

Windows 8 and OEM media with updates and software

Recently i had an idea to create a custom Windows 7, 8 OEM image that includes all the Windows updates and also has couple of softwares inside it (adobe reader, java, flash etc). I used MDT to do this. I came to this idea because every time i prepared
a computer for my customers it took a really long time with all the updates and software i had to install. When i started imaging Windows 8 i stumbled upon a little problem. As everybody knows Windows 8 OEM keys are no longer located on the stickers that are
on the computers. As i have understood it they are basically located somewhere in the BIOS. So, finally to my question :) . Is it somehow possible to retrieve the OEM key from the BIOS so that i could use my custom OEM image ? Right now i can't activate
my Windows 8 OEM's because there are no way for the operating system to access the key that is in the BIOS.

Hi,
The OEM license allows the organization to use that pre-installed image on that OEM PC only. If the PC fails in the future and the image needs to be restored, the organization needs to use the original recovery media provided by the OEM to re-install the
image.
I suggest you consult with the manufacturer for more information.
Alex Zhao
TechNet Community Support

Why does Digital Edition not work in desktop mode for WIndows 8?

I have installed the most recent version of JAVA and then downloaded and installed Digital Editions. I can open Digital Editions in desktop mode but when I select a book I cannot turn the page or move to a new page by any means. The only thing that seems to work is to select a new page and then toggle between full screen and partial.

I don't think ADE uses Java at all.
I run it in desktop mode in WIndows 8 and it reads books and turns pages fine: either using the left-right arrow keys,
or clicking on the forward/back buttons each side of the scrollbar at the bottom of the page.
There are lots of bugs in ADE2.0, and even though that isn't a bug for me it may be for you.
Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172

Windows XP and MacBook Pro Networking

Hello guys, I have been googling this stuff for 2 days now, and I'm to the point where I am nearly ready to pull my hair out!
I use Telus Highspeed internet here in Canada. Basically, I have a desktop PC running Windows XP downstairs in our house which is connected to the internet via a D-Link Router (2700HG-E Gateway). The other day, I bought a MacBook Pro, which is now running Mac OSX 10.5.4
As soon as I went through setup on the MacBook, it connected to the internet via the network BIG RIG (which is what I have set my router to broadcast as). The internet works perfect. If I go into my Router Admin settings, it shows 2 computers on my home network - my Windows PC and my MacBook Pro - life is good.
Now, I am trying to set up file and printer sharing between these two computers. This is where I have read so many different things, it is making my head spin. I tried setting up 'shared' folders on my windows PC and also set my printer to SHARED, but I can't figure out how to access them from my Mac (and the printer does not show up under the 'Windows' section of 'Printers' on my Mac). I was FINALLY able to access a shared folder on the PC through my Mac by going into Finder-Go-Connect to Server, and then entering the IP address and folder manually. But isn't there an easier way? And how do I set up printer sharing properly?
Just for the record, I am very experienced with computers...but very inexperienced with networking....so any simplification would help Thanks in advance for any help. I have read about entering workgroups and the like....but it just seems like it should be easier with both pc's showing up on my router, and the settings on the top RH side of the Mac (to the left of the clock) shows the BIG RIG router right there, and the internet is working fine.
Thanks again!
Chris

Hello Big Rig. Welcome to the Apple Discussions!
Check out this excellent iFelix article to see if it will help: Sharing files between a Windows XP PC and a Mac running OS 10.4.x. He also has articles related to shared Windows printers as well.

Start Windows XP Mode in Windows 7 Minimized

Hi,
I have installed XP mode in windows 7 and changed to run minimized on the start up but it always starts in the normal mode.
Does anyone know how to run it on the start up minimized?

Hi,
Here is another thread that talk about same question with yours, please take it as reference:
http://social.technet.microsoft.com/Forums/windows/en-US/81d3aafc-216d-4036-bc66-48b53ff1a69d/can-i-have-virtual-pc-start-when-windows-starts-in-fullsceen-mode-but-minimised?forum=w7itprovirt
Roger Lu
TechNet Community Support

Problem with window repaint and scrollbars in edit mode (LabVIEW 8.0.1)

I am running LabVIEW 8.0.1 in Windows XP SP3. For my main VI, I ran into a strange problem about 5 months ago. The front panel window - in both edit mode and run mode - stopped repainting itself on the right side which is most visible when you scroll up and down, but also visible with overlapping windows. Coincident with the repaint problem, both scrollbars look disabled with greyed-out arrows and no boxes in the bars that you can click and drag to scroll the window. The scrollbars still partially work if you hover the mouse over them and roll the mouse wheel but clicking and dragging doesn't work.
The front panel has lots of controls and indicators including tab-control containers and is larger in the horizontal and vertical directions so both scrollbars should be active. But I deleted all elements on the front panel and everything in the block diagram and the problem persists. So the problem is not directly related to some control/indicator display.
I saved the simple VI with this problem (using a wide text line and a tall rounded box to test), then created a new VI and copied the two elements to the new VI. This new VI does not have the repaint and scrollbar problem. The two VIs differ slightly in memory usage and in revision number (the bad one is revision 1785 and the good one is revision 3), but otherwise the two VIs are identical. I attached both VIs to this posting. When you first open the bad VI, you'll see the disabled scrollbars whereas the good VI has active scrollbars. To replicate the repaint problem, scroll the window up and down with your mouse wheel. If it's fine when you first open the VI, click on another window, then click back on the VI window and try the mouse wheel again. This clicking-away-and-back always causes the repaint problem for me. I tried the VIs on two different computers both running Windows XP SP3 and LabVIEW 8.0.1 with identical results.
Here's what I discovered from troubleshooting with the simple VIs:
* scrollbars always disabled
* repaint problem in main window for window widths larger then 680 pixels
* repaint problem in main window menu toolbar for widths larger than 646 pixels
* entire window becomes disabled for window widths larger than 1348 pixels
* can repaint window by minimizing and restoring, but only repaints that one time
* scrollbar boxes sometimes flicker into view but then disappear
* scroll left and right by hovering mouse over horizontal scrollbar and using mouse wheel
I found something similar on this forum (thread: Problem with front panel refresh) - it might be related to the CAR about the panel being offset internally. I don't have access to LabVIEW 8.5 or later and don't plan to upgrade - I haven't tried the trial version as that user did. I could try to copy and paste my entire block diagram to a new VI but the VI is so large I'm afraid something would break, plus I don't want this to happen again in a few months. The problem seemed to occur after a certain number of saves (or revision number). I save backup copies often and when the problem first happened, I was able to go back to a previous version, make the missing changes and save it with no problems, but this only delayed the problem and it came up later. So maybe it's the revision number. It didn't seem related to a particular addition or modification in the front panel or diagram.
The image attached shows the repaint and scrollbar problems in the bad VI.
This brings up a question I have - if this problem is a bug and was fixed in 8.5 and later, is there a way to apply bug fixes to earlier versions? Or do I have to pay for an upgrade to fix such bugs?
Solved!
Go to Solution.
Attachments:
RepaintTest_Bad.gif ‏27 KB
Test Repaint - From Bad VI, scrollbar and repaint problems.vi ‏7 KB
Test Repaint - From Blank VI, no problems.vi ‏5 KB

Seems something got corrupted with this VI. Copy things over to a fresh VI and things should be OK.
See also this recent report of a similar issue.
LabVIEW Champion . Do more with less code and in less time .

Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?

Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling

XP-Mode in Windows 7 (64) and also Registration refused

Similar Messages

Maybe you are looking for