XP not allowing BT use for mic

I boot camped XP onto my MBP and I set up my bluetooth headset in XP. I want to use it for xfire and online games, but in the audio settings (both software and in the XP mic/speaker controls) I can only choose the regular input audio (built in mic. is there a way so Windows lets me use my bluetooth as a recording device/mic?

Kylemakk,
Did you have the microphone volume mute? Check that from the Creative Surround Mixer application. Also make sure that the mic are jack to the correct connector.
Jason

Similar Messages

IPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) i can only transfer the unedited versions. Any tips? Thanks!

iPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) I cannot choose this edited album, only transfer the unedited versions. Any tips? Thanks!

Hi Anjohi,
Thanks for visiting Apple Support Communities.
If you've edited photos on your iPad and only see the original version when you import them to your computer, the tips in this article may help:
iOS: Edited photos show original photo after import or in other apps
All the best,
Jeremy

Farm Remote App 2012 R : Your system administrator does not allow the use of default credentials to log on to Work Resources

Hi
Here is the situation:
I have a Farm with 3 servers W2012R2 in a Domain
Server1                           Server 2
Server3
RDSession Host            RDSession Host
RDSession Host
Connection Broker        Connection Broker (Passive)
RD Web Access
2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
                  -poccb.mydomain.local (Use for the Connection Broker and points to Server1)
I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
The certificate Manager has generated 2 CA certificates :
- 1 for the RD Web Acc (poc.mydomain.local
-1 for Connection Broker SSO and for publishing
I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
Server GPO :
Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
Always prompt for password upon connection=Disabled
Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
Set client connection encryption level : High Level
Client GPO
Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
TERMSRV/POCCB.mydomain.local
I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
I have now problem with SSO.
Connection with remote desktop client with server name = poccb.mydomain.local
Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
If in my client GPO I add the physical name of the 3 servers, it works :
TERMSRV/Server1
TERMSRV/Server2
TERMSRV/Server3
Open RDP Files with server name = poccb.mydomain.local
if my connection broker connects me on Server1 , no problem
But If I arrive on Server2 & Server 3=
Your system administrator does not allow the use of default credentials to log on to Work Resources
I have searched on internet. No result for " to log on to Work Resources"
Any idea ? Thanks for your help

Hi,
Thank you for posting in Windows Server Forum.
Firstly check that, your user is using domain\username to enter the credential in the dialog box.
Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Saved Credentials with NTLM-only Server Authentication
Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
More information:
Remote desktop credentials did not work
Hope it helps!
Thanks.
Dharmesh Solanki

Error in COR1 - Material not allowed to use

Hi,
Material is in the stock "unrestricted use " but does not allow to use in a production process order. All related options are verified for example : MB51, MMBE, Date of production is prior to use, Quality is OK, Not in blocked stock, not reserved for some other order, same material was in use from same batch till 02.06.09 suddenly since 03.06.09 a error pops up during batch determination during creating a " Process Order " through COR1.
Regards,
Suresh

Check the Cross plant Material status in Basic data and plant specific status in MRp1 in the material master.
look for material master changes
Regards
Ratan
Edited by: Ratan on Jun 22, 2009 4:17 PM

Interaction enabled on dimensional columns though not marked as Use for display

Hi,
I am facing issue with few of the dimensional columns in OBI 11g. Drill down property is enabled for few columns which are not marked as Use for Display or added to any hierarchy level.
Clicking on these columns is drilling down to the next lower lever. we can avoid this by setting a system wide defaults but not allowed to do that.
Any other suggestions to overcome the issue?
Thanks,
Vj

Any dimensional attribute column residing on a higher level of aggregation will automatically render the drill-down to its next lower-level child.
"Use for display" defines the attribute(s) displayed by default after a drill and is used to populate the property of the (default) displayed presentation column in a presentation hierarchy.
So you are experiencing standard, desired behaviour. Removing that interaction will necessitate setting system-wide defaults.
Cheers

HT1539 What happens when you attempt to download a digital copy, but it doesn't upload in iTunes, and you're not allowed to use the code again?

What happens when you attempt to download a digital copy, but it doesn't upload in iTunes, and you're not allowed to use the code again?

Thanks for your reply, but you might have misunderstood it a bit. I'm NOT trying to buy a movie. ****, I'm not even in the actual Apple Store, when this happens I'm in the library not the Store part of iTunes.
To clarify - I have purchased a physical copy of a movie which came with another physical copy which contains the digital copy. The digital copy is on the DVD, all I need is just to transfer this file to my iPod Touch, for example, I'm not trying to download it from the store or repurchase it and it's not any gift code that I've received, the digital copy is on the disc. This is the first time ever that I've purchased something on a disc and I'm not allowed to access it because the disc hasn't been purchased within my country.
So again - I'm not attempting any purchase or download any purchased digital copy - it's on a DVD I own physically so... why is even the region of my Store relevant, the code I enter is (as I assume) just supposed to check if it's a legal genuine copy (which it is, as I've said - there are 6 discs in the pack: 3 movies on 3 Blu-rays and 3 DVD containing these digital copies of them). If I own it, I think that's proof enough that I have the right to use it. I just don't get it. I fully agree with you and understand your point if there was any purchase going on here, but it's not, it's just - I put a disc into my computer and I can't access it

Is there any BI Dashboard view not allowed to use in BIP report?

My customer wants to display BI Dashboard page on BI Publisher report.
Is there any BI Dashboard view which is not allowed to use in BI Publisher report?
Seem no summarized document for this, and then can I understand like “No related limit for BIP report”?

Explore this page OBIEE - Presentation Variable System (reserved variable) | GerardNico.com (BI, OBIEE, OWB, DataWarehouse)

Error Employee is not allowed to use cost object

I am getting below error when I try to submit my expense.
Employee 1833539 is not allowed to use cost object 9443688 - 10 of type Sales Order Item on 05/01/2014
I cheked few things as below.
1. I do have valid sales order with valid end date
2. I did enter my time in ISP for the date in question
3. The work location entered for the date in question is "On Premise" which means I travelled.
has anyone faced similar issue? Any help is greatly appreciated.
Regards,
Rajesh

I suggest that you report an incident so that your travel department can confirm if you are staffed on the SO in SAP Cloud for Travel and Expense.

I am not allowed to use upgrade on this computer ???

Itunes 7.6 keeps telling me, that I am not allowed
to use the Jan-update on my computer ? ? ?
It does not allow me to sync the upgrade
to my ipod touch FW 1.1.3 eventhough my Vista-PC
is activated to Apple.
Need help - thanks

It works for me now.
I had to delete the folder C:\ProgramData\Apple Computer\iTunes\SC Info
Subsequently, I had to authorize my computer from the administrator account.
Seems that VISTA messes something up when you try to authorize the computer from a non administrator account.
Gruz

Allowed domains and not allowed to use this list messages

imsimta version
Sun Java(tm) System Messaging Server 6.3-3.01 (built Jul 12 2007; 32bit)
libimta.so 6.3-3.01 (built 20:10:10, Jul 12 2007; 32bit)
SunOS mars 5.10 Generic_125100-08 sun4u sparc SUNW,Sun-Fire-V240
We have a group account that we use for support. We have used the Delegated Administrator to limit which domains can send to the list by setting "Allowed Domains:" to the form "*.our.domain" on that list.
We are now getting thousands of the spam to "postmaster" saying that saying the message could not be delivered because "Reason: you are not allowed to use this list:". We have successfully kept a lot of spam from going to that group mailing list, but we as postmasters would like to not receive all those messages telling spammers that they can't send to the list. Is there a way to turn off those "not allowed to use this list" messages to postmaster for the group list?
Hal Huntley

halsri wrote:
We have a group account that we use for support. We have used the Delegated Administrator to limit which domains can send to the list by setting "Allowed Domains:" to the form "*.our.domain" on that list.
We are now getting thousands of the spam to "postmaster" saying that saying the message could not be delivered because "Reason: you are not allowed to use this list:". We have successfully kept a lot of spam from going to that group mailing list, but we as postmasters would like to not receive all those messages telling spammers that they can't send to the list. Is there a way to turn off those "not allowed to use this list" messages to postmaster for the group list?There appears to be two issues here:
1. The postmaster address is getting a copy of the bounce emails.
2. The mailing list is not rejecting the email at the SMTP level, rather it is creating a DSN bounce email.
Whether the postmaster gets a copy of bounce emails is controlled by the various warnpost, sendpost etc. imta.cnf channel configuration parameters. More information on turning these off here:
http://msg.wikidoc.info/index.php/Turn_Off_Postmaster_Notifications
For the second issue, if a mailing list has the "maildeferprocessing" attribute set to "yes" then the email will be accepted (without checking the allowed/disallowed recipients) and processed 'offline'. If the email is rejected during this processing then a bounce email is created.
As of Messaging Server 6.3 you can set mailDeferProcessing to "After_Auth" to cause group validation to be done immediately but group expansion to be deferred.
Setting mailDeferProcess to "no" causes the group expansion and validation to be performed before the email is accepted. The downside to this is that for a large mailing list that take a long time to expand, the email client could time out and the email not accepted.
Regards,
Shane.

Not allowed to use olsql on this Db

hello all.....
I have this message when i try to into plsql developer with connection normal, when i use sysdba no problem but i can't see some stored procedures...
message full:
you are not allowed to use pl/sql on this database.
how i can to fix the problem when i access normal way??
thanks for you help!!!

I believe this has to do with custom authorization functionality implemented by the PL/SQL Developer product. See the online help to learn how to either grant the privileges you desire or disable the authorization functionality (note that this will not affect native database authorization, just the optional, custom layer implemented by the PL/SQL Developer product).

Why is not allowed to use "/" in Storage bin?

Dear experts,
It is mentioned in the Help that "For technical reasons it is not allowed to use the special character "/" while creating storage bins.
Kindly let me know what is the technical reason behind this?
regards,
Shetty

/ is a character that is used in IDOCs to indicate that a field should be left untouched
So it is impossible for SAP to decide whether it has to input the / or to not process this field.

08 iWeb not allowed previous used fonts

anyone figure why my imported fonts which could be used by older version, now cannot be read with new version for my blog? If this is the situation, I will revert back to older version.... any body know? no genius, procare knew why.

halsri wrote:
We have a group account that we use for support. We have used the Delegated Administrator to limit which domains can send to the list by setting "Allowed Domains:" to the form "*.our.domain" on that list.
We are now getting thousands of the spam to "postmaster" saying that saying the message could not be delivered because "Reason: you are not allowed to use this list:". We have successfully kept a lot of spam from going to that group mailing list, but we as postmasters would like to not receive all those messages telling spammers that they can't send to the list. Is there a way to turn off those "not allowed to use this list" messages to postmaster for the group list?There appears to be two issues here:
1. The postmaster address is getting a copy of the bounce emails.
2. The mailing list is not rejecting the email at the SMTP level, rather it is creating a DSN bounce email.
Whether the postmaster gets a copy of bounce emails is controlled by the various warnpost, sendpost etc. imta.cnf channel configuration parameters. More information on turning these off here:
http://msg.wikidoc.info/index.php/Turn_Off_Postmaster_Notifications
For the second issue, if a mailing list has the "maildeferprocessing" attribute set to "yes" then the email will be accepted (without checking the allowed/disallowed recipients) and processed 'offline'. If the email is rejected during this processing then a bounce email is created.
As of Messaging Server 6.3 you can set mailDeferProcessing to "After_Auth" to cause group validation to be done immediately but group expansion to be deferred.
Setting mailDeferProcess to "no" causes the group expansion and validation to be performed before the email is accepted. The downside to this is that for a large mailing list that take a long time to expand, the email client could time out and the email not accepted.
Regards,
Shane.

I recently bought an iphone 4s from people who are not in the know and restore my iphone .. Now do not be in use for not having ID and password ... Owner apple owner just gave me a serial number how do I want to continue to use this ... Their telephone he

I recently bought an iphone 4s from people who are not in the know
and restore my iphone .. Now do not be in use for not having ID and password ... Owner apple owner just gave me a serial number how do I want to continue to use this ... Their telephone help me: (

I am having same problem . i can not use the phone. my Carrier ROGERS checked the phone its not stolen or lost phone but after restoring always ask for apple ID of previous owner and seller is not responding to any mails or phone if some one can help me out than it will be great.
thank you

Not allowing to query for all blocks.

hi,
i have a new question.
I'm not able to query in all the fields of all blocks.
I'm able to query only in all fields of master-block. But not able to query in fields of other blocks.
I have set 'query all records' in the property palette to 'Yes'.
What should i do do allow it query & execute in all fields of all blocks?
Thank you.

Pl do not post duplicates - Not allowing to query for all blocks.

XP not allowing BT use for mic

Similar Messages

Maybe you are looking for