XP not seeing any network cards

I have XP running through Bootcamp but am not able to see a network card. I do not seem to be able to find any drivers to use. Any suggestions?

Stefan,
thanks for your response......... not looking for excuses but.... I am new to this 'Mac World' and I did not think for one minute that the OSX DVD would have anything to do with MS Windows once it was up and running!!!!!!
Unfortunately I'm away from my Leopard disk until tuesday but it sounds like my problem will be solved.....
Thanks very much,
Tim

Similar Messages

  • Airport Not Seeing Any Networks

    *After waking the PowerBook from overnight Sleep mode this morning, my Airport isn't working. No reception of mine or any other WiFi networks in my building (there are typically 4 or 5 of my neighbors' wireless networks displayed when I check using Internet Connection). After numerous re-starts, forced re-starts, re-boots and Disk Utility passes, nothing. I re-set my Airport Express, nothing. I re-seated my internal Airport card and checked the antenna connector, still nothing. Do Airport cards eventually just quit working? Anyone here have any other ideas or suggestions? Thanks, Jd*
    Message was edited by: JD

    *Back from the Apple Store and a meeting with a very competent genius. The card works and I was able to access the Internet there. Returned home and I was very optimistic and ready to get back to normal. I restarted the computer and had the same problem, not seeing ANY WiFi networks, including my Airport Express or any of my neighbors' networks. I took the computer to another building in my complex and was able to join onto one of the WiFi networks there, so that tells me that there may be outside influences at work here. I have just re-installed OSX to make a clean start to see if that would make a difference, again nothing. My next move is to check with one of my neighbors to see if they are having the same problem. Otherwise, it's very strange and I'm stumped. I'm open to any other ideas and suggestions, if anyone here has any. Thanks, JD*

  • IPad 2 not seeing any networks

    Hi,
    My iPad 2 recently stopped seeing any available networks.  At the time it happened, I was running iOS 7.  When I try to look for available networks, none come up.  When I search for my network by name, I get a message saying it could not find it.  I have two MacBook Airs, two iPhones, and an iPad mini that are all seeing my network (and a few of my neighbors' as well) and having no issues connecting.
    My first step to try and fix this was to reset the network settings.  No dice.  Then I tried updating to iOS 8.1.1.  No dice again.  I've also backed up and reset the iPad to factory settings.  Still nothing. 
    Has anyone else had a similar issue?  I'm worried it is a hardware issue and my WiFi might be fried.
    Thanks for any insight.

    Try the following:
    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings
    3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

  • G5 imac not seeing any networks

    Hi -
    I just installed an Airport Extreme card in my 20" 1.8 GHz PowerPC G5 and it's not seeing anything. Not my home Airport Express network and none of the other networks that abound on my block.
    The computer itself recognizes the card, it just has nothing to do at this point.
    Searching on old posts here, people have mentioned a Power G5 problem, but the info is kind of old and so far I haven't gotten the scoop yet on what might be wrong.

    ...Thinking that the antenna is not properly installed. Will try again...

  • My iPad does not see any network and i cannot get to place to enter manually IP address etc.

    I have several apple products connected on home wi-fi network. On my ipad, it does not even see the network.  I would put IP etc in manually but I cannot get to that page to do it.  Where is it? 

    Settings>WiFi>Other. Enter your network name and password.
    Have you tried .... Settings>WiFi>Tap your network name>Tap the blue arrow on the right>Forget this network. Restart your iPad then go back to the WiFi settings and try again?

  • Airport can not see any network

    Hi.
    I am struggling with airport on my macbook. There are many wifi newtorks around me, my iphone can see them all, but all of the sudden, for the second day my macbook cant see any of them. I already tried everything, however nothing works any ideas?

    Hi,
    try to repair your mac os x. Put in the mac os x dvd, and hold down the "c" key before you start your macbook.
    Utilities > Disk Utility. Repair Volume and after that repair permissions.
    Reply
    Greets

  • Airport Extreme card does not see any networks...help!

    I have a home network that is working fine - 2 linksys routers with WDS set up... it all works great - an Ibook g4 running 10.3 and has an Airport Extreme card connects flawlessly everyday. As does an old G4 powerbook with an old airport card.
    however, I have this dual g4 with 10.4.3 running, and a recently-installed airport extreme card.
    When I turn airport "on" it never sees our network. And it doesn't see my neighbors' networks, either, which are also always visible.
    I can, howevr, connect via ethernet to the router that is somewhat nearby. that networking is fine...I can get on wired, but not wirelessly.
    I've installed the 2005-1 update, and have run Software Update as well to see if there are any other patches/updates necesary. so as far as I can tell, I am up to date.
    system profiler says:
    Wireless Card Type: AirPort Extreme
    Wireless Card Locale: USA
    Wireless Card Firmware Version: 404.2 (3.90.34.0.p16)
    Current Wireless Network: wireless network not available
    and in the extensions section for the airport, it says:
    Version: 4.0.4
    Last Modified: 11/20/05 9:55 AM
    Get Info String: 4.0.4, Copyright © 2002 - 2005 Apple Computer, Inc., All Rights Reserved
    Location: /System/Library/Extensions/AppleAirPort2.kext
    kext Version: 404.2
    Load Address: 0x39738000
    Valid: Yes
    Authentic: Yes
    Dependencies: Satisfied
    Integrity: Correct
    I am at a loss. Is there anything else I can do before writing off the card as a bad card - or perhaps the logic board is faulty?
    I hope there is a simple solution to this. I appreciate your expert help.

    Go back and recheck the Airport Extreme card installation. Make sure you plugged the connector for the internal Airport antenna into its socket on the Airport Extreme card itself - and make sure the plug is fully seated into its socket (none of the metal sleave should be showing).

  • T3i will not see any SD card that I've used in it before. Laptop sees them fine.

    Everything was fine when I took the card out and transferred photos to my laptop, but when I put the card back into the camera, it said "No Card," so I tried another card that I use with this camera and got the same message.  I tried them in my laptop and there is no problem with them there. As I said, I use both cards in this camera, alternating between the two of them with no problem, all the time.  One is a PNY and the other is an EMTEC (MicroComputer's brand, I believe).  Both are class 10.  One is 8 Gigs and the other 16.  But none of that should matter, since they have both been fine up to now.  So the problem is with the camera, but what and why???

    Hi Mike, thank you for your reply. I love my T3i; since owning it, I have become a much better photographer not only in my skill, but also in my creativity.  I was heartbroken when the No Card in Camera message appeared and I was unable to use it.  Fortunately, and curiously, the problem corrected itself the morning after my initial post, but as I am obviously not the only person, nor am I one of just a few who have had this problem with their T3i, I am concerned that it's just a matter of time before it does it again.  I read in one of the forums that it costs $250 to repair this, and I just don't have that kind of money to spend nor do I believe I should have to on what is apparently a defect in a camera that is less than three years old .   Can Canon work with me (us) here?  

  • TS1398 my ipone 4s does not see any wifi networks my ipad works ok tried all of the above resetting network etc still does not see wifi ?

    my ipone 4s does not see any wifi networks my ipad works ok tried all of the above resetting network etc still does not see wifi ?

    If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem with the wireless card or with something else.

  • Satelite A30 does not see any other network devices in WLan

    I recently bought a Toshiba Wireless LAN Mini PCI Card, i've installed it and managed to get it to recognise my broadband but it does not see any other network devices. I was not supplied with any drivers or software to operate the card (I bought it from a proper dealer). Can you recommend downloads that would run this card?
    I have a Satelite A30 laptop 1gb ram 60GB HDD.
    Also large files sometimes stop transfering (hangs)when using my USB connection. The usb controller is using microsoft driver 5.1.2600.0 dated 1 june 2002.
    Is this a driver problem?

    Hi
    If the WLan card is properly installed so you have only not configured you settings.
    I dont know which devices in the broadband you mean but usually if you want to communicate or transfer files between notebooks through the WLan so all computers must be in the same domain or workgroup.
    I cannot give you a proper answer but only a suggestion. I have red that sometimes a lower power could be responsible for such issue. Try to disable the option Power safe in the USB root hub properties in the device manager.
    Hi
    If the WLan card is properly installed so you have only not configured you settings.
    I dont know which devices in the broadband you mean but usually if you want to communicate or transfer files between notebooks through the WLan so all computer must be in the same domain or workgroup.
    I cannot give you a proper answer but only a suggestion. I have red that sometimes a lower power could be responsible for such issue. Try to disable the option Power safe in the USB root hub properties in the device manager.

  • Hello everyone,   I just updated my 3GS from iOS 5.0.0 to 5.0.1   Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.   I tried restarting the phone se

    Hello everyone,
    I just updated my 3GS from iOS 5.0.0 to 5.0.1
    Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
    I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

    You do not need to keep posting the same thing over and over again.
    Look to the right side of this page at "more Like this" or do a forum search.

  • Mac Pro early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb and Raid card Raid5 them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

    On my Mac Pro, early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb. The Raid card Raid 5ed them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

    You don't see drives when using a hardware RAID only the volumes.
    WD Green are not suitable for hardware RAID (or software RAID for that matter).
    USB2 and TimeMachine are a disaster waiting to happen. I've used SATA (internal) and eSATA (using SATA PCIe cards) trouble-free.
    I can't say I begin to understand your use or "choosing the install drive for the backup"
    Install what?
    You don't load TimeMachine. Maybe seems minor but that is not how to describe the behavior of software.
    You read FAQ and How To http://www.apple.com/support/timemachine
    Time Machine’s Gory Details:
    https://www.apple.com/support/timemachine/
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    Lion Recovry & TimeMachine
    http://www.apple.com/support/lion/installrecovery/
    http://www.apple.com/support/lion/
    How To Restore Your System
    http://pondini.org/TM/14.htmlMac OS X v10.7 Lion
    Pondini's Blog: Time Machine - Troubleshooting -- B5.  Would you like to inherit (or re-use) the backup . . . ?

  • I recently uploaded a gift card with a balance of $25.00, I make a purchase in a game for $5.99 and my balance on my gift card is now $12.18.  I did not receive an email confirming the purchase and do not see any activity on my account. Where is my money?

    I recently uploaded a gift card with a balance of $25.00, I make a purchase in a game for $5.99 and my balance on my gift card is now $12.18.  I did not receive an email confirming the purchase and do not see any activity on my account. Where did my money go? How can I get it returned??

    The receipt usually takes more time to receive. I got my receipt from about 7:00pm yesterday at about 10:00pm today.

  • No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks

    No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks

    Most likely the phone is locked to a carrier that you haven't tried yet.

  • IBook G4 Airport Extreme does not see any SSID

    Hi,
    My iBook 1,2 Ghz has been working great for several years now.
    I am working with Mac OS X Tiger (10.4.11) for quite some time
    and it never let me down. I connect to the internet using an Airport Express
    connected to a speedtouch router.
    The Airport Express Card in my iBook always found 6 or 7 SSID's of other
    Wireless Networks in my neighbourhood and it used to login automatically on
    my Airport Express wireless wetwork station.
    Last week it suddenly stopped working correctly.
    After starting OS X on my laptop the little Airport icon in the upper bar faded out grey.
    When I click it it says it can't find any networks.
    I checked all my settings, downgraded my Airport Extensions
    and even installed a spare (refurbished) Airport Extreme Card.
    Even with another Airport Extreme Card it does not see any wireless networks.
    My other macs, a unibody MacBook Pro and white MacBook work fine with the Airport Express.
    What could be wrong? Am I overlooking something here? Can somebody help me out?
    How can i get my Airport Express/iBook G4 connected to my wireless network again?

    Hi Elko,
    Thanks for the reply.
    I re-installed the original Airport Extreme card into the slot again.
    But now i pushed it harder than the first time. (just like you said)
    I noticed the second click, but that doesn't seem to be the problem.
    Both Airport Cards (the original and the new) were installed correctly.
    I also checked the antenna connection but that is seated o.k. too.
    After re-installing the card, i booted into Mac OS X Tiger and checked the ASP.
    It says a Airport Extreme Card is installed with firmware version 405.1 (3.90.34.0.p.18)
    and the langauge version is international/worldwide. So far, so good.
    Nevertheless the airport card does still not find any wireless networks or SSID's after
    scanning multiple times. (Location on automatic)
    I am planning an upgrade to Leopard today. Maybe that's gonna help, since there were some Airport Extreme updates in Leopard. If that's not the solution, I will stay with your other suggestion and buy me a nice USB dongle.
    Do you have any idea what type of dongles work best with Leopard? I have seen some different models, but a lot of dongles require third-party software to make it work and are not automatically recognized by OS X.

Maybe you are looking for

  • Issue in generation of Change Document - ChaRM

    Dear All, We are implementing ChaRM, I have copied the standard transaction type to z. I am able to create request for change with transaction type zmcr but when the normal change or urgent change document are created they have standard transaction t

  • The Information you have entered is not correct - ...

    I have two Skype to go contacts and two registered numbers from which I will make calls to these contacts. Each time I try to use the Skype to go numbers, and I try to authenticate my saved numbers I receive a message telling me that the number and p

  • QUICK QUESTION ABOUT PORTS

    Hi, I have a quick question about port forwarding/mapping. My question, lets say I am running MSN messenger, who's ports are 6880-6900. But lets say I am running a torrent application or something else that requires those ports. If both applications

  • Syncing vs. Streaming?

    Just got a 160GB Apple TV for xmas and set up was a breeze. I am having no problems streaming music and videos from both Macs in the house via my WiFi network. What I can not seem to figure out is how to "Sync" or copy content to the Apple TV from ei

  • Qosmio X500/02 - Question about partition

    Hello Forum, I have a just purchased a Qosmio X500/02 notebook and have noticed on one of the HDD, a partition having the specs. of NTFS (System) Pri. Act. and a size of 1.465 GB. Is this partition created in order to use the built-in backup and rest